From 58475fb908485ab38860d6970a8063987fe1d619 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Thu, 24 Sep 2009 13:04:53 +0100 Subject: mtd: nand: fix htmldocs warnings Fixed following htmldocs warnings: DOCPROC Documentation/DocBook/mtdnand.xml Warning(drivers/mtd/nand/nand_base.c:769): No description found for parameter 'page' Warning(drivers/mtd/nand/nand_base.c:785): No description found for parameter 'page' Warning(drivers/mtd/nand/nand_base.c:824): No description found for parameter 'page' Warning(drivers/mtd/nand/nand_base.c:947): No description found for parameter 'page' Warning(drivers/mtd/nand/nand_base.c:996): No description found for parameter 'page' Warning(drivers/mtd/nand/nand_base.c:1040): No description found for parameter 'page' Signed-off-by: Jaswinder Singh Rajput Signed-off-by: David Woodhouse diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 2211386..2957cc7 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -761,6 +761,7 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip) * @mtd: mtd info structure * @chip: nand chip info structure * @buf: buffer to store read data + * @page: page number to read * * Not for syndrome calculating ecc controllers, which use a special oob layout */ @@ -777,6 +778,7 @@ static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, * @mtd: mtd info structure * @chip: nand chip info structure * @buf: buffer to store read data + * @page: page number to read * * We need a special oob layout and handling even when OOB isn't used. */ @@ -818,6 +820,7 @@ static int nand_read_page_raw_syndrome(struct mtd_info *mtd, struct nand_chip *c * @mtd: mtd info structure * @chip: nand chip info structure * @buf: buffer to store read data + * @page: page number to read */ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip, uint8_t *buf, int page) @@ -939,6 +942,7 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, uint3 * @mtd: mtd info structure * @chip: nand chip info structure * @buf: buffer to store read data + * @page: page number to read * * Not for syndrome calculating ecc controllers which need a special oob layout */ @@ -983,6 +987,7 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, * @mtd: mtd info structure * @chip: nand chip info structure * @buf: buffer to store read data + * @page: page number to read * * Hardware ECC for large page chips, require OOB to be read first. * For this ECC mode, the write_page method is re-used from ECC_HW. @@ -1031,6 +1036,7 @@ static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd, * @mtd: mtd info structure * @chip: nand chip info structure * @buf: buffer to store read data + * @page: page number to read * * The hw generator calculates the error syndrome automatically. Therefor * we need a special oob layout and handling. -- cgit v0.10.2 From f5bae56a501347671b18095731d78e13eee5205f Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 24 Sep 2009 15:11:37 -0400 Subject: mtd/maps: gpio-addr-flash: pull in linux/ headers rather than asm/ Now that there are linux/ versions of gpio.h and io.h, include those rather than hitting the asm/ versions. Signed-off-by: Mike Frysinger Signed-off-by: David Woodhouse diff --git a/drivers/mtd/maps/gpio-addr-flash.c b/drivers/mtd/maps/gpio-addr-flash.c index 44ef9a4..1ad5caf 100644 --- a/drivers/mtd/maps/gpio-addr-flash.c +++ b/drivers/mtd/maps/gpio-addr-flash.c @@ -13,7 +13,9 @@ * Licensed under the GPL-2 or later. */ +#include #include +#include #include #include #include @@ -23,9 +25,6 @@ #include #include -#include -#include - #define pr_devinit(fmt, args...) ({ static const __devinitconst char __fmt[] = fmt; printk(__fmt, ## args); }) #define DRIVER_NAME "gpio-addr-flash" -- cgit v0.10.2 From de19d02b731478877ce8b1ccf371c2b2142ac80e Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 24 Sep 2009 15:11:38 -0400 Subject: mtd/maps: gpio-addr-flash: depend on GPIO arch support The driver requires gpio functionality, so make sure we depend on that in the Kconfig menu. Signed-off-by: Mike Frysinger Signed-off-by: David Woodhouse diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 3a9a960..0fc67a2 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -486,6 +486,7 @@ config MTD_BFIN_ASYNC config MTD_GPIO_ADDR tristate "GPIO-assisted Flash Chip Support" + depends on GENERIC_GPIO || GPIOLIB depends on MTD_COMPLEX_MAPPINGS select MTD_PARTITIONS help -- cgit v0.10.2 From 9d40ee200a527ce08ab8c793ba8ae3e242edbb0e Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Wed, 7 Oct 2009 10:54:19 -0700 Subject: [IA64] Squeeze ticket locks back into 4 bytes. Linus pointed out that other people have spent large amounts of time and effort to optimize the layout of frequently used structures. Often these have embedded locks, and the assumption is that a lock takes 4 bytes. Linus also pointed out how to work with the limited options for atomic instructions on Itanium. Signed-off-by: Tony Luck diff --git a/arch/ia64/include/asm/spinlock.h b/arch/ia64/include/asm/spinlock.h index 30bb930..4fa5027 100644 --- a/arch/ia64/include/asm/spinlock.h +++ b/arch/ia64/include/asm/spinlock.h @@ -25,61 +25,68 @@ * by atomically noting the tail and incrementing it by one (thus adding * ourself to the queue and noting our position), then waiting until the head * becomes equal to the the initial value of the tail. + * The pad bits in the middle are used to prevent the next_ticket number + * overflowing into the now_serving number. * - * 63 32 31 0 + * 31 17 16 15 14 0 * +----------------------------------------------------+ - * | next_ticket_number | now_serving | + * | now_serving | padding | next_ticket | * +----------------------------------------------------+ */ -#define TICKET_SHIFT 32 +#define TICKET_SHIFT 17 +#define TICKET_BITS 15 +#define TICKET_MASK ((1 << TICKET_BITS) - 1) static __always_inline void __ticket_spin_lock(raw_spinlock_t *lock) { - int *p = (int *)&lock->lock, turn, now_serving; + int *p = (int *)&lock->lock, ticket, serve; - now_serving = *p; - turn = ia64_fetchadd(1, p+1, acq); + ticket = ia64_fetchadd(1, p, acq); - if (turn == now_serving) + if (!(((ticket >> TICKET_SHIFT) ^ ticket) & TICKET_MASK)) return; - do { + ia64_invala(); + + for (;;) { + asm volatile ("ld4.c.nc %0=[%1]" : "=r"(serve) : "r"(p) : "memory"); + + if (!(((serve >> TICKET_SHIFT) ^ ticket) & TICKET_MASK)) + return; cpu_relax(); - } while (ACCESS_ONCE(*p) != turn); + } } static __always_inline int __ticket_spin_trylock(raw_spinlock_t *lock) { - long tmp = ACCESS_ONCE(lock->lock), try; + int tmp = ACCESS_ONCE(lock->lock); - if (!(((tmp >> TICKET_SHIFT) ^ tmp) & ((1L << TICKET_SHIFT) - 1))) { - try = tmp + (1L << TICKET_SHIFT); - - return ia64_cmpxchg(acq, &lock->lock, tmp, try, sizeof (tmp)) == tmp; - } + if (!(((tmp >> TICKET_SHIFT) ^ tmp) & TICKET_MASK)) + return ia64_cmpxchg(acq, &lock->lock, tmp, tmp + 1, sizeof (tmp)) == tmp; return 0; } static __always_inline void __ticket_spin_unlock(raw_spinlock_t *lock) { - int *p = (int *)&lock->lock; + unsigned short *p = (unsigned short *)&lock->lock + 1, tmp; - (void)ia64_fetchadd(1, p, rel); + asm volatile ("ld2.bias %0=[%1]" : "=r"(tmp) : "r"(p)); + ACCESS_ONCE(*p) = (tmp + 2) & ~1; } static inline int __ticket_spin_is_locked(raw_spinlock_t *lock) { long tmp = ACCESS_ONCE(lock->lock); - return !!(((tmp >> TICKET_SHIFT) ^ tmp) & ((1L << TICKET_SHIFT) - 1)); + return !!(((tmp >> TICKET_SHIFT) ^ tmp) & TICKET_MASK); } static inline int __ticket_spin_is_contended(raw_spinlock_t *lock) { long tmp = ACCESS_ONCE(lock->lock); - return (((tmp >> TICKET_SHIFT) - tmp) & ((1L << TICKET_SHIFT) - 1)) > 1; + return ((tmp - (tmp >> TICKET_SHIFT)) & TICKET_MASK) > 1; } static inline int __raw_spin_is_locked(raw_spinlock_t *lock) diff --git a/arch/ia64/include/asm/spinlock_types.h b/arch/ia64/include/asm/spinlock_types.h index b61d136..474e46f 100644 --- a/arch/ia64/include/asm/spinlock_types.h +++ b/arch/ia64/include/asm/spinlock_types.h @@ -6,7 +6,7 @@ #endif typedef struct { - volatile unsigned long lock; + volatile unsigned int lock; } raw_spinlock_t; #define __RAW_SPIN_LOCK_UNLOCKED { 0 } -- cgit v0.10.2 From c5cca146aa03e1f60fb179df65f0dbaf17bc64ed Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Fri, 9 Oct 2009 18:31:20 +0200 Subject: x86/amd-iommu: Workaround for erratum 63 There is an erratum for IOMMU hardware which documents undefined behavior when forwarding SMI requests from peripherals and the DTE of that peripheral has a sysmgt value of 01b. This problem caused weird IO_PAGE_FAULTS in my case. This patch implements the suggested workaround for that erratum into the AMD IOMMU driver. The erratum is documented with number 63. Cc: stable@kernel.org Signed-off-by: Joerg Roedel diff --git a/arch/x86/include/asm/amd_iommu.h b/arch/x86/include/asm/amd_iommu.h index bdf96f1..9dbd403 100644 --- a/arch/x86/include/asm/amd_iommu.h +++ b/arch/x86/include/asm/amd_iommu.h @@ -30,6 +30,7 @@ extern irqreturn_t amd_iommu_int_handler(int irq, void *data); extern void amd_iommu_flush_all_domains(void); extern void amd_iommu_flush_all_devices(void); extern void amd_iommu_shutdown(void); +extern void amd_iommu_apply_erratum_63(u16 devid); #else static inline int amd_iommu_init(void) { return -ENODEV; } static inline void amd_iommu_detect(void) { } diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c index 6c99f50..f95dfe5 100644 --- a/arch/x86/kernel/amd_iommu.c +++ b/arch/x86/kernel/amd_iommu.c @@ -1114,6 +1114,8 @@ static void __detach_device(struct protection_domain *domain, u16 devid) amd_iommu_dev_table[devid].data[1] = 0; amd_iommu_dev_table[devid].data[2] = 0; + amd_iommu_apply_erratum_63(devid); + /* decrease reference counter */ domain->dev_cnt -= 1; diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c index c1b17e9..498c8c7 100644 --- a/arch/x86/kernel/amd_iommu_init.c +++ b/arch/x86/kernel/amd_iommu_init.c @@ -509,6 +509,26 @@ static void set_dev_entry_bit(u16 devid, u8 bit) amd_iommu_dev_table[devid].data[i] |= (1 << _bit); } +static int get_dev_entry_bit(u16 devid, u8 bit) +{ + int i = (bit >> 5) & 0x07; + int _bit = bit & 0x1f; + + return (amd_iommu_dev_table[devid].data[i] & (1 << _bit)) >> _bit; +} + + +void amd_iommu_apply_erratum_63(u16 devid) +{ + int sysmgt; + + sysmgt = get_dev_entry_bit(devid, DEV_ENTRY_SYSMGT1) | + (get_dev_entry_bit(devid, DEV_ENTRY_SYSMGT2) << 1); + + if (sysmgt == 0x01) + set_dev_entry_bit(devid, DEV_ENTRY_IW); +} + /* Writes the specific IOMMU for a device into the rlookup table */ static void __init set_iommu_for_device(struct amd_iommu *iommu, u16 devid) { @@ -537,6 +557,8 @@ static void __init set_dev_entry_from_acpi(struct amd_iommu *iommu, if (flags & ACPI_DEVFLAG_LINT1) set_dev_entry_bit(devid, DEV_ENTRY_LINT1_PASS); + amd_iommu_apply_erratum_63(devid); + set_iommu_for_device(iommu, devid); } -- cgit v0.10.2 From 883a3acf5b0d4782ac35981227a0d094e8b44850 Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Fri, 9 Oct 2009 10:52:39 -0700 Subject: [IA64] Re-implement spinaphores using ticket lock concepts Bound the wait time for the ptcg_sem by using similar idea to the ticket spin locks. In this case we have only one instance of a spinaphore, so make it 8 bytes rather than try to squeeze it into 4-bytes to keep the code simpler (and shorter). Signed-off-by: Tony Luck diff --git a/arch/ia64/mm/tlb.c b/arch/ia64/mm/tlb.c index f426dc7..ee09d26 100644 --- a/arch/ia64/mm/tlb.c +++ b/arch/ia64/mm/tlb.c @@ -100,24 +100,36 @@ wrap_mmu_context (struct mm_struct *mm) * this primitive it can be moved up to a spinaphore.h header. */ struct spinaphore { - atomic_t cur; + unsigned long ticket; + unsigned long serve; }; static inline void spinaphore_init(struct spinaphore *ss, int val) { - atomic_set(&ss->cur, val); + ss->ticket = 0; + ss->serve = val; } static inline void down_spin(struct spinaphore *ss) { - while (unlikely(!atomic_add_unless(&ss->cur, -1, 0))) - while (atomic_read(&ss->cur) == 0) - cpu_relax(); + unsigned long t = ia64_fetchadd(1, &ss->ticket, acq), serve; + + if (time_before(t, ss->serve)) + return; + + ia64_invala(); + + for (;;) { + asm volatile ("ld4.c.nc %0=[%1]" : "=r"(serve) : "r"(&ss->serve) : "memory"); + if (time_before(t, serve)) + return; + cpu_relax(); + } } static inline void up_spin(struct spinaphore *ss) { - atomic_add(1, &ss->cur); + ia64_fetchadd(1, &ss->serve, rel); } static struct spinaphore ptcg_sem; -- cgit v0.10.2 From e33497aaaef5ec9998cf7b007b13d74bb41be74e Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 12 Oct 2009 13:32:38 +1000 Subject: drm/radeon/kms: don't refuse LUT because no framebuffer. The fb binding might be happening in a subsequent crtc setup call. gets rid of some lut issues. Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index 3655d91..b8f2344 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -137,9 +137,6 @@ static void radeon_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green, if (size != 256) { return; } - if (crtc->fb == NULL) { - return; - } /* userspace palettes are always correct as is */ for (i = 0; i < 256; i++) { @@ -147,7 +144,6 @@ static void radeon_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green, radeon_crtc->lut_g[i] = green[i] >> 6; radeon_crtc->lut_b[i] = blue[i] >> 6; } - radeon_crtc_load_lut(crtc); } -- cgit v0.10.2 From f30f37def4c72e5df8d949022b806e5a4e99bbcb Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michel=20D=C3=A4nzer?= Date: Thu, 8 Oct 2009 10:44:09 +0200 Subject: drm/radeon/kms: Update memory bandwidth requirements in mode_set_base hook. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The hook may change the number of bytes per pixel being scanned out, which affects the CRTC memory bandwidth requirements. E.g. booting in 8bpp and then running X in 32bpp would result in the bandwidth requirements being underestimated for the latter and consequently in CRTC FIFO underruns causing visible artifacts with 3D intensive workloads. ATOM changes only compile-tested. Signed-off-by: Michel Dänzer Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 14fa970..38a87cc 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -563,6 +563,10 @@ int atombios_crtc_set_base(struct drm_crtc *crtc, int x, int y, radeon_fb = to_radeon_framebuffer(old_fb); radeon_gem_object_unpin(radeon_fb->obj); } + + /* Bytes per pixel may have changed */ + radeon_bandwidth_update(rdev); + return 0; } @@ -701,7 +705,6 @@ int atombios_crtc_mode_set(struct drm_crtc *crtc, } atombios_overscan_setup(crtc, mode, adjusted_mode); atombios_scaler_setup(crtc); - radeon_bandwidth_update(rdev); return 0; } diff --git a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c index 36410f8..ec2df73 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c @@ -532,6 +532,10 @@ int radeon_crtc_set_base(struct drm_crtc *crtc, int x, int y, radeon_fb = to_radeon_framebuffer(old_fb); radeon_gem_object_unpin(radeon_fb->obj); } + + /* Bytes per pixel may have changed */ + radeon_bandwidth_update(rdev); + return 0; } @@ -1015,14 +1019,11 @@ static int radeon_crtc_mode_set(struct drm_crtc *crtc, int x, int y, struct drm_framebuffer *old_fb) { struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); - struct drm_device *dev = crtc->dev; - struct radeon_device *rdev = dev->dev_private; /* TODO TV */ radeon_crtc_set_base(crtc, x, y, old_fb); radeon_set_crtc_timing(crtc, adjusted_mode); radeon_set_pll(crtc, adjusted_mode); - radeon_bandwidth_update(rdev); if (radeon_crtc->crtc_id == 0) { radeon_legacy_rmx_mode_set(crtc, mode, adjusted_mode); } else { -- cgit v0.10.2 From b5fc901002db0519093ec723fd98969bc03cd629 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michel=20D=C3=A4nzer?= Date: Thu, 8 Oct 2009 10:44:10 +0200 Subject: drm/radeon/kms: Fix apparent typo in legacy CRTC memory bandwidth calculation. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit While investigating the cause of CRTC FIFO underruns, I noticed that when converting the memory bandwidth calculation from the userspace X driver code, an instance of '8.0' was apparently accidentally converted to '80'. Signed-off-by: Michel Dänzer Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index 374ecac..33198dd 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -2350,7 +2350,7 @@ void r100_bandwidth_update(struct radeon_device *rdev) /* Find the total latency for the display data. */ - disp_latency_overhead.full = rfixed_const(80); + disp_latency_overhead.full = rfixed_const(8); disp_latency_overhead.full = rfixed_div(disp_latency_overhead, sclk_ff); mc_latency_mclk.full += disp_latency_overhead.full + cur_latency_mclk.full; mc_latency_sclk.full += disp_latency_overhead.full + cur_latency_sclk.full; -- cgit v0.10.2 From 2ffb842948ba64b03986f4064140a74c1780c44b Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 8 Oct 2009 13:02:19 -0400 Subject: drm/radeon/kms: make sure LVDS panel is valid in detect() If the panel data is bogus this can lead to problems later when the hardware trys to set the mode. If the data is invalid, report LVDS as disconnected. Should fix fdo bug 24247. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index e376be4..466f601 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -415,8 +415,20 @@ static int radeon_lvds_mode_valid(struct drm_connector *connector, static enum drm_connector_status radeon_lvds_detect(struct drm_connector *connector) { - enum drm_connector_status ret = connector_status_connected; + enum drm_connector_status ret = connector_status_disconnected; + struct drm_encoder *encoder = radeon_best_single_encoder(connector); + + if (encoder) { + struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); + struct radeon_native_mode *native_mode = &radeon_encoder->native_mode; + + /* check if panel is valid */ + if (native_mode->panel_xres >= 320 && native_mode->panel_yres >= 240) + ret = connector_status_connected; + + } /* check acpi lid status ??? */ + radeon_connector_update_scratch_regs(connector, ret); return ret; } -- cgit v0.10.2 From 5f9a0eb5af16906cd31fc3e02746aa3d61fd3aa9 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 8 Oct 2009 13:08:29 -0400 Subject: drm/radeon/kms/atom: reorder crtc dpms Based on recommendation from bios docs. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 38a87cc..0a5082a 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -248,18 +248,18 @@ void atombios_crtc_dpms(struct drm_crtc *crtc, int mode) switch (mode) { case DRM_MODE_DPMS_ON: + atombios_enable_crtc(crtc, 1); if (ASIC_IS_DCE3(rdev)) atombios_enable_crtc_memreq(crtc, 1); - atombios_enable_crtc(crtc, 1); atombios_blank_crtc(crtc, 0); break; case DRM_MODE_DPMS_STANDBY: case DRM_MODE_DPMS_SUSPEND: case DRM_MODE_DPMS_OFF: atombios_blank_crtc(crtc, 1); - atombios_enable_crtc(crtc, 0); if (ASIC_IS_DCE3(rdev)) atombios_enable_crtc_memreq(crtc, 0); + atombios_enable_crtc(crtc, 0); break; } -- cgit v0.10.2 From 2606c88608122339cbd5c6b5c149a2eb74ccfe9e Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 8 Oct 2009 13:36:21 -0400 Subject: drm/radeon/kms/atom: add support for AdjustDisplayPll DCE3+ has an AdjustDisplayPll that will adjust the pixel clock accordingly based on the encoder/transmitter to handle special hw requirements. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 0a5082a..d5e6f3d 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -333,12 +333,13 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) struct drm_encoder *encoder = NULL; struct radeon_encoder *radeon_encoder = NULL; uint8_t frev, crev; - int index = GetIndexIntoMasterTable(COMMAND, SetPixelClock); + int index; SET_PIXEL_CLOCK_PS_ALLOCATION args; PIXEL_CLOCK_PARAMETERS *spc1_ptr; PIXEL_CLOCK_PARAMETERS_V2 *spc2_ptr; PIXEL_CLOCK_PARAMETERS_V3 *spc3_ptr; - uint32_t sclock = mode->clock; + uint32_t pll_clock = mode->clock; + uint32_t adjusted_clock; uint32_t ref_div = 0, fb_div = 0, frac_fb_div = 0, post_div = 0; struct radeon_pll *pll; int pll_flags = 0; @@ -393,12 +394,34 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) } } + /* DCE3+ has an AdjustDisplayPll that will adjust the pixel clock + * accordingly based on the encoder/transmitter to work around + * special hw requirements. + */ + if (ASIC_IS_DCE3(rdev)) { + ADJUST_DISPLAY_PLL_PS_ALLOCATION adjust_pll_args; + + if (!encoder) + return; + + memset(&adjust_pll_args, 0, sizeof(adjust_pll_args)); + adjust_pll_args.usPixelClock = cpu_to_le16(mode->clock / 10); + adjust_pll_args.ucTransmitterID = radeon_encoder->encoder_id; + adjust_pll_args.ucEncodeMode = atombios_get_encoder_mode(encoder); + + index = GetIndexIntoMasterTable(COMMAND, AdjustDisplayPll); + atom_execute_table(rdev->mode_info.atom_context, + index, (uint32_t *)&adjust_pll_args); + adjusted_clock = le16_to_cpu(adjust_pll_args.usPixelClock) * 10; + } else + adjusted_clock = mode->clock; + if (radeon_crtc->crtc_id == 0) pll = &rdev->clock.p1pll; else pll = &rdev->clock.p2pll; - radeon_compute_pll(pll, mode->clock, &sclock, &fb_div, &frac_fb_div, + radeon_compute_pll(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div, &ref_div, &post_div, pll_flags); atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, @@ -409,7 +432,7 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) switch (crev) { case 1: spc1_ptr = (PIXEL_CLOCK_PARAMETERS *) & args.sPCLKInput; - spc1_ptr->usPixelClock = cpu_to_le16(sclock); + spc1_ptr->usPixelClock = cpu_to_le16(mode->clock / 10); spc1_ptr->usRefDiv = cpu_to_le16(ref_div); spc1_ptr->usFbDiv = cpu_to_le16(fb_div); spc1_ptr->ucFracFbDiv = frac_fb_div; @@ -422,7 +445,7 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) case 2: spc2_ptr = (PIXEL_CLOCK_PARAMETERS_V2 *) & args.sPCLKInput; - spc2_ptr->usPixelClock = cpu_to_le16(sclock); + spc2_ptr->usPixelClock = cpu_to_le16(mode->clock / 10); spc2_ptr->usRefDiv = cpu_to_le16(ref_div); spc2_ptr->usFbDiv = cpu_to_le16(fb_div); spc2_ptr->ucFracFbDiv = frac_fb_div; @@ -437,7 +460,7 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) return; spc3_ptr = (PIXEL_CLOCK_PARAMETERS_V3 *) & args.sPCLKInput; - spc3_ptr->usPixelClock = cpu_to_le16(sclock); + spc3_ptr->usPixelClock = cpu_to_le16(mode->clock / 10); spc3_ptr->usRefDiv = cpu_to_le16(ref_div); spc3_ptr->usFbDiv = cpu_to_le16(fb_div); spc3_ptr->ucFracFbDiv = frac_fb_div; @@ -460,6 +483,7 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) } printk("executing set pll\n"); + index = GetIndexIntoMasterTable(COMMAND, SetPixelClock); atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); } -- cgit v0.10.2 From 5a9bcacc0a56f0d9577494e834519480018a6cc3 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 8 Oct 2009 15:09:31 -0400 Subject: drm/radeon/kms/atom: rework crtc modeset - clean up tv timing handling - unify SetCRTC_Timing and SetCRTC_UsingDTDTiming Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index d5e6f3d..7522af1 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -270,59 +270,89 @@ void atombios_crtc_dpms(struct drm_crtc *crtc, int mode) static void atombios_set_crtc_dtd_timing(struct drm_crtc *crtc, - SET_CRTC_USING_DTD_TIMING_PARAMETERS * crtc_param) + struct drm_display_mode *mode) { + struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); struct drm_device *dev = crtc->dev; struct radeon_device *rdev = dev->dev_private; - SET_CRTC_USING_DTD_TIMING_PARAMETERS conv_param; + SET_CRTC_USING_DTD_TIMING_PARAMETERS args; int index = GetIndexIntoMasterTable(COMMAND, SetCRTC_UsingDTDTiming); + u16 misc = 0; - conv_param.usH_Size = cpu_to_le16(crtc_param->usH_Size); - conv_param.usH_Blanking_Time = - cpu_to_le16(crtc_param->usH_Blanking_Time); - conv_param.usV_Size = cpu_to_le16(crtc_param->usV_Size); - conv_param.usV_Blanking_Time = - cpu_to_le16(crtc_param->usV_Blanking_Time); - conv_param.usH_SyncOffset = cpu_to_le16(crtc_param->usH_SyncOffset); - conv_param.usH_SyncWidth = cpu_to_le16(crtc_param->usH_SyncWidth); - conv_param.usV_SyncOffset = cpu_to_le16(crtc_param->usV_SyncOffset); - conv_param.usV_SyncWidth = cpu_to_le16(crtc_param->usV_SyncWidth); - conv_param.susModeMiscInfo.usAccess = - cpu_to_le16(crtc_param->susModeMiscInfo.usAccess); - conv_param.ucCRTC = crtc_param->ucCRTC; + memset(&args, 0, sizeof(args)); + args.usH_Size = cpu_to_le16(mode->crtc_hdisplay); + args.usH_Blanking_Time = + cpu_to_le16(mode->crtc_hblank_end - mode->crtc_hdisplay); + args.usV_Size = cpu_to_le16(mode->crtc_vdisplay); + args.usV_Blanking_Time = + cpu_to_le16(mode->crtc_vblank_end - mode->crtc_vdisplay); + args.usH_SyncOffset = + cpu_to_le16(mode->crtc_hsync_start - mode->crtc_hdisplay); + args.usH_SyncWidth = + cpu_to_le16(mode->crtc_hsync_end - mode->crtc_hsync_start); + args.usV_SyncOffset = + cpu_to_le16(mode->crtc_vsync_start - mode->crtc_vdisplay); + args.usV_SyncWidth = + cpu_to_le16(mode->crtc_vsync_end - mode->crtc_vsync_start); + /*args.ucH_Border = mode->hborder;*/ + /*args.ucV_Border = mode->vborder;*/ + + if (mode->flags & DRM_MODE_FLAG_NVSYNC) + misc |= ATOM_VSYNC_POLARITY; + if (mode->flags & DRM_MODE_FLAG_NHSYNC) + misc |= ATOM_HSYNC_POLARITY; + if (mode->flags & DRM_MODE_FLAG_CSYNC) + misc |= ATOM_COMPOSITESYNC; + if (mode->flags & DRM_MODE_FLAG_INTERLACE) + misc |= ATOM_INTERLACE; + if (mode->flags & DRM_MODE_FLAG_DBLSCAN) + misc |= ATOM_DOUBLE_CLOCK_MODE; + + args.susModeMiscInfo.usAccess = cpu_to_le16(misc); + args.ucCRTC = radeon_crtc->crtc_id; printk("executing set crtc dtd timing\n"); - atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&conv_param); + atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); } -void atombios_crtc_set_timing(struct drm_crtc *crtc, - SET_CRTC_TIMING_PARAMETERS_PS_ALLOCATION * - crtc_param) +static void atombios_crtc_set_timing(struct drm_crtc *crtc, + struct drm_display_mode *mode) { + struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); struct drm_device *dev = crtc->dev; struct radeon_device *rdev = dev->dev_private; - SET_CRTC_TIMING_PARAMETERS_PS_ALLOCATION conv_param; + SET_CRTC_TIMING_PARAMETERS_PS_ALLOCATION args; int index = GetIndexIntoMasterTable(COMMAND, SetCRTC_Timing); + u16 misc = 0; - conv_param.usH_Total = cpu_to_le16(crtc_param->usH_Total); - conv_param.usH_Disp = cpu_to_le16(crtc_param->usH_Disp); - conv_param.usH_SyncStart = cpu_to_le16(crtc_param->usH_SyncStart); - conv_param.usH_SyncWidth = cpu_to_le16(crtc_param->usH_SyncWidth); - conv_param.usV_Total = cpu_to_le16(crtc_param->usV_Total); - conv_param.usV_Disp = cpu_to_le16(crtc_param->usV_Disp); - conv_param.usV_SyncStart = cpu_to_le16(crtc_param->usV_SyncStart); - conv_param.usV_SyncWidth = cpu_to_le16(crtc_param->usV_SyncWidth); - conv_param.susModeMiscInfo.usAccess = - cpu_to_le16(crtc_param->susModeMiscInfo.usAccess); - conv_param.ucCRTC = crtc_param->ucCRTC; - conv_param.ucOverscanRight = crtc_param->ucOverscanRight; - conv_param.ucOverscanLeft = crtc_param->ucOverscanLeft; - conv_param.ucOverscanBottom = crtc_param->ucOverscanBottom; - conv_param.ucOverscanTop = crtc_param->ucOverscanTop; - conv_param.ucReserved = crtc_param->ucReserved; + memset(&args, 0, sizeof(args)); + args.usH_Total = cpu_to_le16(mode->crtc_htotal); + args.usH_Disp = cpu_to_le16(mode->crtc_hdisplay); + args.usH_SyncStart = cpu_to_le16(mode->crtc_hsync_start); + args.usH_SyncWidth = + cpu_to_le16(mode->crtc_hsync_end - mode->crtc_hsync_start); + args.usV_Total = cpu_to_le16(mode->crtc_vtotal); + args.usV_Disp = cpu_to_le16(mode->crtc_vdisplay); + args.usV_SyncStart = cpu_to_le16(mode->crtc_vsync_start); + args.usV_SyncWidth = + cpu_to_le16(mode->crtc_vsync_end - mode->crtc_vsync_start); + + if (mode->flags & DRM_MODE_FLAG_NVSYNC) + misc |= ATOM_VSYNC_POLARITY; + if (mode->flags & DRM_MODE_FLAG_NHSYNC) + misc |= ATOM_HSYNC_POLARITY; + if (mode->flags & DRM_MODE_FLAG_CSYNC) + misc |= ATOM_COMPOSITESYNC; + if (mode->flags & DRM_MODE_FLAG_INTERLACE) + misc |= ATOM_INTERLACE; + if (mode->flags & DRM_MODE_FLAG_DBLSCAN) + misc |= ATOM_DOUBLE_CLOCK_MODE; + + args.susModeMiscInfo.usAccess = cpu_to_le16(misc); + args.ucCRTC = radeon_crtc->crtc_id; printk("executing set crtc timing\n"); - atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&conv_param); + atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); } void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) @@ -602,128 +632,17 @@ int atombios_crtc_mode_set(struct drm_crtc *crtc, struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); struct drm_device *dev = crtc->dev; struct radeon_device *rdev = dev->dev_private; - struct drm_encoder *encoder; - SET_CRTC_TIMING_PARAMETERS_PS_ALLOCATION crtc_timing; - int need_tv_timings = 0; - bool ret; /* TODO color tiling */ - memset(&crtc_timing, 0, sizeof(crtc_timing)); - - list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { - /* find tv std */ - if (encoder->crtc == crtc) { - struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); - - if (radeon_encoder->active_device & ATOM_DEVICE_TV_SUPPORT) { - struct radeon_encoder_atom_dac *tv_dac = radeon_encoder->enc_priv; - if (tv_dac) { - if (tv_dac->tv_std == TV_STD_NTSC || - tv_dac->tv_std == TV_STD_NTSC_J || - tv_dac->tv_std == TV_STD_PAL_M) - need_tv_timings = 1; - else - need_tv_timings = 2; - break; - } - } - } - } - - crtc_timing.ucCRTC = radeon_crtc->crtc_id; - if (need_tv_timings) { - ret = radeon_atom_get_tv_timings(rdev, need_tv_timings - 1, - &crtc_timing, &adjusted_mode->clock); - if (ret == false) - need_tv_timings = 0; - } - - if (!need_tv_timings) { - crtc_timing.usH_Total = adjusted_mode->crtc_htotal; - crtc_timing.usH_Disp = adjusted_mode->crtc_hdisplay; - crtc_timing.usH_SyncStart = adjusted_mode->crtc_hsync_start; - crtc_timing.usH_SyncWidth = - adjusted_mode->crtc_hsync_end - adjusted_mode->crtc_hsync_start; - - crtc_timing.usV_Total = adjusted_mode->crtc_vtotal; - crtc_timing.usV_Disp = adjusted_mode->crtc_vdisplay; - crtc_timing.usV_SyncStart = adjusted_mode->crtc_vsync_start; - crtc_timing.usV_SyncWidth = - adjusted_mode->crtc_vsync_end - adjusted_mode->crtc_vsync_start; - - if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC) - crtc_timing.susModeMiscInfo.usAccess |= ATOM_VSYNC_POLARITY; - - if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC) - crtc_timing.susModeMiscInfo.usAccess |= ATOM_HSYNC_POLARITY; - - if (adjusted_mode->flags & DRM_MODE_FLAG_CSYNC) - crtc_timing.susModeMiscInfo.usAccess |= ATOM_COMPOSITESYNC; - - if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) - crtc_timing.susModeMiscInfo.usAccess |= ATOM_INTERLACE; - - if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN) - crtc_timing.susModeMiscInfo.usAccess |= ATOM_DOUBLE_CLOCK_MODE; - } atombios_crtc_set_pll(crtc, adjusted_mode); - atombios_crtc_set_timing(crtc, &crtc_timing); + atombios_crtc_set_timing(crtc, adjusted_mode); if (ASIC_IS_AVIVO(rdev)) atombios_crtc_set_base(crtc, x, y, old_fb); else { - if (radeon_crtc->crtc_id == 0) { - SET_CRTC_USING_DTD_TIMING_PARAMETERS crtc_dtd_timing; - memset(&crtc_dtd_timing, 0, sizeof(crtc_dtd_timing)); - - /* setup FP shadow regs on R4xx */ - crtc_dtd_timing.ucCRTC = radeon_crtc->crtc_id; - crtc_dtd_timing.usH_Size = adjusted_mode->crtc_hdisplay; - crtc_dtd_timing.usV_Size = adjusted_mode->crtc_vdisplay; - crtc_dtd_timing.usH_Blanking_Time = - adjusted_mode->crtc_hblank_end - - adjusted_mode->crtc_hdisplay; - crtc_dtd_timing.usV_Blanking_Time = - adjusted_mode->crtc_vblank_end - - adjusted_mode->crtc_vdisplay; - crtc_dtd_timing.usH_SyncOffset = - adjusted_mode->crtc_hsync_start - - adjusted_mode->crtc_hdisplay; - crtc_dtd_timing.usV_SyncOffset = - adjusted_mode->crtc_vsync_start - - adjusted_mode->crtc_vdisplay; - crtc_dtd_timing.usH_SyncWidth = - adjusted_mode->crtc_hsync_end - - adjusted_mode->crtc_hsync_start; - crtc_dtd_timing.usV_SyncWidth = - adjusted_mode->crtc_vsync_end - - adjusted_mode->crtc_vsync_start; - /* crtc_dtd_timing.ucH_Border = adjusted_mode->crtc_hborder; */ - /* crtc_dtd_timing.ucV_Border = adjusted_mode->crtc_vborder; */ - - if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC) - crtc_dtd_timing.susModeMiscInfo.usAccess |= - ATOM_VSYNC_POLARITY; - - if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC) - crtc_dtd_timing.susModeMiscInfo.usAccess |= - ATOM_HSYNC_POLARITY; - - if (adjusted_mode->flags & DRM_MODE_FLAG_CSYNC) - crtc_dtd_timing.susModeMiscInfo.usAccess |= - ATOM_COMPOSITESYNC; - - if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) - crtc_dtd_timing.susModeMiscInfo.usAccess |= - ATOM_INTERLACE; - - if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN) - crtc_dtd_timing.susModeMiscInfo.usAccess |= - ATOM_DOUBLE_CLOCK_MODE; - - atombios_set_crtc_dtd_timing(crtc, &crtc_dtd_timing); - } + if (radeon_crtc->crtc_id == 0) + atombios_set_crtc_dtd_timing(crtc, adjusted_mode); radeon_crtc_set_base(crtc, x, y, old_fb); radeon_legacy_atom_set_surface(crtc); } diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 5b6c08c..979ddfd 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -857,8 +857,7 @@ radeon_atombios_get_primary_dac_info(struct radeon_encoder *encoder) } bool radeon_atom_get_tv_timings(struct radeon_device *rdev, int index, - SET_CRTC_TIMING_PARAMETERS_PS_ALLOCATION *crtc_timing, - int32_t *pixel_clock) + struct drm_display_mode *mode) { struct radeon_mode_info *mode_info = &rdev->mode_info; ATOM_ANALOG_TV_INFO *tv_info; @@ -866,7 +865,7 @@ bool radeon_atom_get_tv_timings(struct radeon_device *rdev, int index, ATOM_DTD_FORMAT *dtd_timings; int data_index = GetIndexIntoMasterTable(DATA, AnalogTV_Info); u8 frev, crev; - uint16_t data_offset; + u16 data_offset, misc; atom_parse_data_header(mode_info->atom_context, data_index, NULL, &frev, &crev, &data_offset); @@ -876,28 +875,37 @@ bool radeon_atom_get_tv_timings(struct radeon_device *rdev, int index, if (index > MAX_SUPPORTED_TV_TIMING) return false; - crtc_timing->usH_Total = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_H_Total); - crtc_timing->usH_Disp = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_H_Disp); - crtc_timing->usH_SyncStart = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_H_SyncStart); - crtc_timing->usH_SyncWidth = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_H_SyncWidth); - - crtc_timing->usV_Total = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_V_Total); - crtc_timing->usV_Disp = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_V_Disp); - crtc_timing->usV_SyncStart = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_V_SyncStart); - crtc_timing->usV_SyncWidth = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_V_SyncWidth); - - crtc_timing->susModeMiscInfo = tv_info->aModeTimings[index].susModeMiscInfo; - - crtc_timing->ucOverscanRight = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_OverscanRight); - crtc_timing->ucOverscanLeft = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_OverscanLeft); - crtc_timing->ucOverscanBottom = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_OverscanBottom); - crtc_timing->ucOverscanTop = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_OverscanTop); - *pixel_clock = le16_to_cpu(tv_info->aModeTimings[index].usPixelClock) * 10; + mode->crtc_htotal = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_H_Total); + mode->crtc_hdisplay = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_H_Disp); + mode->crtc_hsync_start = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_H_SyncStart); + mode->crtc_hsync_end = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_H_SyncStart) + + le16_to_cpu(tv_info->aModeTimings[index].usCRTC_H_SyncWidth); + + mode->crtc_vtotal = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_V_Total); + mode->crtc_vdisplay = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_V_Disp); + mode->crtc_vsync_start = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_V_SyncStart); + mode->crtc_vsync_end = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_V_SyncStart) + + le16_to_cpu(tv_info->aModeTimings[index].usCRTC_V_SyncWidth); + + mode->flags = 0; + misc = le16_to_cpu(tv_info->aModeTimings[index].susModeMiscInfo.usAccess); + if (misc & ATOM_VSYNC_POLARITY) + mode->flags |= DRM_MODE_FLAG_NVSYNC; + if (misc & ATOM_HSYNC_POLARITY) + mode->flags |= DRM_MODE_FLAG_NHSYNC; + if (misc & ATOM_COMPOSITESYNC) + mode->flags |= DRM_MODE_FLAG_CSYNC; + if (misc & ATOM_INTERLACE) + mode->flags |= DRM_MODE_FLAG_INTERLACE; + if (misc & ATOM_DOUBLE_CLOCK_MODE) + mode->flags |= DRM_MODE_FLAG_DBLSCAN; + + mode->clock = le16_to_cpu(tv_info->aModeTimings[index].usPixelClock) * 10; if (index == 1) { /* PAL timings appear to have wrong values for totals */ - crtc_timing->usH_Total -= 1; - crtc_timing->usV_Total -= 1; + mode->crtc_htotal -= 1; + mode->crtc_vtotal -= 1; } break; case 2: @@ -906,17 +914,36 @@ bool radeon_atom_get_tv_timings(struct radeon_device *rdev, int index, return false; dtd_timings = &tv_info_v1_2->aModeTimings[index]; - crtc_timing->usH_Total = le16_to_cpu(dtd_timings->usHActive) + le16_to_cpu(dtd_timings->usHBlanking_Time); - crtc_timing->usH_Disp = le16_to_cpu(dtd_timings->usHActive); - crtc_timing->usH_SyncStart = le16_to_cpu(dtd_timings->usHActive) + le16_to_cpu(dtd_timings->usHSyncOffset); - crtc_timing->usH_SyncWidth = le16_to_cpu(dtd_timings->usHSyncWidth); - crtc_timing->usV_Total = le16_to_cpu(dtd_timings->usVActive) + le16_to_cpu(dtd_timings->usVBlanking_Time); - crtc_timing->usV_Disp = le16_to_cpu(dtd_timings->usVActive); - crtc_timing->usV_SyncStart = le16_to_cpu(dtd_timings->usVActive) + le16_to_cpu(dtd_timings->usVSyncOffset); - crtc_timing->usV_SyncWidth = le16_to_cpu(dtd_timings->usVSyncWidth); - - crtc_timing->susModeMiscInfo.usAccess = le16_to_cpu(dtd_timings->susModeMiscInfo.usAccess); - *pixel_clock = le16_to_cpu(dtd_timings->usPixClk) * 10; + mode->crtc_htotal = le16_to_cpu(dtd_timings->usHActive) + + le16_to_cpu(dtd_timings->usHBlanking_Time); + mode->crtc_hdisplay = le16_to_cpu(dtd_timings->usHActive); + mode->crtc_hsync_start = le16_to_cpu(dtd_timings->usHActive) + + le16_to_cpu(dtd_timings->usHSyncOffset); + mode->crtc_hsync_end = mode->crtc_hsync_start + + le16_to_cpu(dtd_timings->usHSyncWidth); + + mode->crtc_vtotal = le16_to_cpu(dtd_timings->usVActive) + + le16_to_cpu(dtd_timings->usVBlanking_Time); + mode->crtc_vdisplay = le16_to_cpu(dtd_timings->usVActive); + mode->crtc_vsync_start = le16_to_cpu(dtd_timings->usVActive) + + le16_to_cpu(dtd_timings->usVSyncOffset); + mode->crtc_vsync_end = mode->crtc_vsync_start + + le16_to_cpu(dtd_timings->usVSyncWidth); + + mode->flags = 0; + misc = le16_to_cpu(dtd_timings->susModeMiscInfo.usAccess); + if (misc & ATOM_VSYNC_POLARITY) + mode->flags |= DRM_MODE_FLAG_NVSYNC; + if (misc & ATOM_HSYNC_POLARITY) + mode->flags |= DRM_MODE_FLAG_NHSYNC; + if (misc & ATOM_COMPOSITESYNC) + mode->flags |= DRM_MODE_FLAG_CSYNC; + if (misc & ATOM_INTERLACE) + mode->flags |= DRM_MODE_FLAG_INTERLACE; + if (misc & ATOM_DOUBLE_CLOCK_MODE) + mode->flags |= DRM_MODE_FLAG_DBLSCAN; + + mode->clock = le16_to_cpu(dtd_timings->usPixClk) * 10; break; } return true; diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index a65ab1a..3e58c6e 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -31,6 +31,10 @@ extern int atom_debug; +/* evil but including atombios.h is much worse */ +bool radeon_atom_get_tv_timings(struct radeon_device *rdev, int index, + struct drm_display_mode *mode); + uint32_t radeon_get_encoder_id(struct drm_device *dev, uint32_t supported_device, uint8_t dac) { @@ -219,6 +223,8 @@ static bool radeon_atom_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *adjusted_mode) { struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); + struct drm_device *dev = encoder->dev; + struct radeon_device *rdev = dev->dev_private; drm_mode_set_crtcinfo(adjusted_mode, 0); @@ -230,6 +236,18 @@ static bool radeon_atom_mode_fixup(struct drm_encoder *encoder, && (mode->crtc_vsync_start < (mode->crtc_vdisplay + 2))) adjusted_mode->crtc_vsync_start = adjusted_mode->crtc_vdisplay + 2; + if (radeon_encoder->active_device & ATOM_DEVICE_TV_SUPPORT) { + struct radeon_encoder_atom_dac *tv_dac = radeon_encoder->enc_priv; + if (tv_dac) { + if (tv_dac->tv_std == TV_STD_NTSC || + tv_dac->tv_std == TV_STD_NTSC_J || + tv_dac->tv_std == TV_STD_PAL_M) + radeon_atom_get_tv_timings(rdev, 0, adjusted_mode); + else + radeon_atom_get_tv_timings(rdev, 1, adjusted_mode); + } + } + return true; } -- cgit v0.10.2 From de2103e452ec7f2db5db7c44279735688608381d Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 9 Oct 2009 15:14:30 -0400 Subject: drm/radeon/kms: use drm_mode directly for panel modes This reduces the number of mode format conversions needed and makes native panel mode support cleaner. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 979ddfd..79d4b77 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -798,27 +798,29 @@ struct radeon_encoder_atom_dig *radeon_atombios_get_lvds_info(struct if (!lvds) return NULL; - lvds->native_mode.dotclock = + lvds->native_mode.clock = le16_to_cpu(lvds_info->info.sLCDTiming.usPixClk) * 10; - lvds->native_mode.panel_xres = + lvds->native_mode.hdisplay = le16_to_cpu(lvds_info->info.sLCDTiming.usHActive); - lvds->native_mode.panel_yres = + lvds->native_mode.vdisplay = le16_to_cpu(lvds_info->info.sLCDTiming.usVActive); - lvds->native_mode.hblank = - le16_to_cpu(lvds_info->info.sLCDTiming.usHBlanking_Time); - lvds->native_mode.hoverplus = - le16_to_cpu(lvds_info->info.sLCDTiming.usHSyncOffset); - lvds->native_mode.hsync_width = - le16_to_cpu(lvds_info->info.sLCDTiming.usHSyncWidth); - lvds->native_mode.vblank = - le16_to_cpu(lvds_info->info.sLCDTiming.usVBlanking_Time); - lvds->native_mode.voverplus = - le16_to_cpu(lvds_info->info.sLCDTiming.usVSyncOffset); - lvds->native_mode.vsync_width = - le16_to_cpu(lvds_info->info.sLCDTiming.usVSyncWidth); + lvds->native_mode.htotal = lvds->native_mode.hdisplay + + le16_to_cpu(lvds_info->info.sLCDTiming.usHBlanking_Time); + lvds->native_mode.hsync_start = lvds->native_mode.hdisplay + + le16_to_cpu(lvds_info->info.sLCDTiming.usHSyncOffset); + lvds->native_mode.hsync_end = lvds->native_mode.hsync_start + + le16_to_cpu(lvds_info->info.sLCDTiming.usHSyncWidth); + lvds->native_mode.vtotal = lvds->native_mode.vdisplay + + le16_to_cpu(lvds_info->info.sLCDTiming.usVBlanking_Time); + lvds->native_mode.vsync_start = lvds->native_mode.vdisplay + + le16_to_cpu(lvds_info->info.sLCDTiming.usVSyncWidth); + lvds->native_mode.vsync_end = lvds->native_mode.vsync_start + + le16_to_cpu(lvds_info->info.sLCDTiming.usVSyncWidth); lvds->panel_pwr_delay = le16_to_cpu(lvds_info->info.usOffDelayInMs); lvds->lvds_misc = lvds_info->info.ucLVDS_Misc; + /* set crtc values */ + drm_mode_set_crtcinfo(&lvds->native_mode, CRTC_INTERLACE_HALVE_V); encoder->native_mode = lvds->native_mode; } diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c index 748265a..e91aba8 100644 --- a/drivers/gpu/drm/radeon/radeon_combios.c +++ b/drivers/gpu/drm/radeon/radeon_combios.c @@ -808,25 +808,25 @@ static struct radeon_encoder_lvds *radeon_legacy_get_lvds_info_from_regs(struct lvds->panel_blon_delay = (lvds_ss_gen_cntl >> RADEON_LVDS_PWRSEQ_DELAY2_SHIFT) & 0xf; if (fp_vert_stretch & RADEON_VERT_STRETCH_ENABLE) - lvds->native_mode.panel_yres = + lvds->native_mode.vdisplay = ((fp_vert_stretch & RADEON_VERT_PANEL_SIZE) >> RADEON_VERT_PANEL_SHIFT) + 1; else - lvds->native_mode.panel_yres = + lvds->native_mode.vdisplay = (RREG32(RADEON_CRTC_V_TOTAL_DISP) >> 16) + 1; if (fp_horz_stretch & RADEON_HORZ_STRETCH_ENABLE) - lvds->native_mode.panel_xres = + lvds->native_mode.hdisplay = (((fp_horz_stretch & RADEON_HORZ_PANEL_SIZE) >> RADEON_HORZ_PANEL_SHIFT) + 1) * 8; else - lvds->native_mode.panel_xres = + lvds->native_mode.hdisplay = ((RREG32(RADEON_CRTC_H_TOTAL_DISP) >> 16) + 1) * 8; - if ((lvds->native_mode.panel_xres < 640) || - (lvds->native_mode.panel_yres < 480)) { - lvds->native_mode.panel_xres = 640; - lvds->native_mode.panel_yres = 480; + if ((lvds->native_mode.hdisplay < 640) || + (lvds->native_mode.vdisplay < 480)) { + lvds->native_mode.hdisplay = 640; + lvds->native_mode.vdisplay = 480; } ppll_div_sel = RREG8(RADEON_CLOCK_CNTL_INDEX + 1) & 0x3; @@ -846,8 +846,8 @@ static struct radeon_encoder_lvds *radeon_legacy_get_lvds_info_from_regs(struct lvds->panel_vcc_delay = 200; DRM_INFO("Panel info derived from registers\n"); - DRM_INFO("Panel Size %dx%d\n", lvds->native_mode.panel_xres, - lvds->native_mode.panel_yres); + DRM_INFO("Panel Size %dx%d\n", lvds->native_mode.hdisplay, + lvds->native_mode.vdisplay); return lvds; } @@ -882,11 +882,11 @@ struct radeon_encoder_lvds *radeon_combios_get_lvds_info(struct radeon_encoder DRM_INFO("Panel ID String: %s\n", stmp); - lvds->native_mode.panel_xres = RBIOS16(lcd_info + 0x19); - lvds->native_mode.panel_yres = RBIOS16(lcd_info + 0x1b); + lvds->native_mode.hdisplay = RBIOS16(lcd_info + 0x19); + lvds->native_mode.vdisplay = RBIOS16(lcd_info + 0x1b); - DRM_INFO("Panel Size %dx%d\n", lvds->native_mode.panel_xres, - lvds->native_mode.panel_yres); + DRM_INFO("Panel Size %dx%d\n", lvds->native_mode.hdisplay, + lvds->native_mode.vdisplay); lvds->panel_vcc_delay = RBIOS16(lcd_info + 0x2c); if (lvds->panel_vcc_delay > 2000 || lvds->panel_vcc_delay < 0) @@ -944,27 +944,25 @@ struct radeon_encoder_lvds *radeon_combios_get_lvds_info(struct radeon_encoder if (tmp == 0) break; - if ((RBIOS16(tmp) == lvds->native_mode.panel_xres) && + if ((RBIOS16(tmp) == lvds->native_mode.hdisplay) && (RBIOS16(tmp + 2) == - lvds->native_mode.panel_yres)) { - lvds->native_mode.hblank = - (RBIOS16(tmp + 17) - RBIOS16(tmp + 19)) * 8; - lvds->native_mode.hoverplus = - (RBIOS16(tmp + 21) - RBIOS16(tmp + 19) - - 1) * 8; - lvds->native_mode.hsync_width = - RBIOS8(tmp + 23) * 8; - - lvds->native_mode.vblank = (RBIOS16(tmp + 24) - - RBIOS16(tmp + 26)); - lvds->native_mode.voverplus = - ((RBIOS16(tmp + 28) & 0x7ff) - - RBIOS16(tmp + 26)); - lvds->native_mode.vsync_width = - ((RBIOS16(tmp + 28) & 0xf800) >> 11); - lvds->native_mode.dotclock = - RBIOS16(tmp + 9) * 10; + lvds->native_mode.vdisplay)) { + lvds->native_mode.htotal = RBIOS16(tmp + 17) * 8; + lvds->native_mode.hsync_start = RBIOS16(tmp + 21) * 8; + lvds->native_mode.hsync_end = (RBIOS8(tmp + 23) + + RBIOS16(tmp + 21)) * 8; + + lvds->native_mode.vtotal = RBIOS16(tmp + 24); + lvds->native_mode.vsync_start = RBIOS16(tmp + 28) & 0x7ff; + lvds->native_mode.vsync_end = + ((RBIOS16(tmp + 28) & 0xf800) >> 11) + + (RBIOS16(tmp + 28) & 0x7ff); + + lvds->native_mode.clock = RBIOS16(tmp + 9) * 10; lvds->native_mode.flags = 0; + /* set crtc values */ + drm_mode_set_crtcinfo(&lvds->native_mode, CRTC_INTERLACE_HALVE_V); + } } } else { diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index 466f601..da3a049 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -178,25 +178,13 @@ static struct drm_display_mode *radeon_fp_native_mode(struct drm_encoder *encode struct drm_device *dev = encoder->dev; struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); struct drm_display_mode *mode = NULL; - struct radeon_native_mode *native_mode = &radeon_encoder->native_mode; + struct drm_display_mode *native_mode = &radeon_encoder->native_mode; - if (native_mode->panel_xres != 0 && - native_mode->panel_yres != 0 && - native_mode->dotclock != 0) { + if (native_mode->hdisplay != 0 && + native_mode->vdisplay != 0 && + native_mode->clock != 0) { mode = drm_mode_create(dev); - - mode->hdisplay = native_mode->panel_xres; - mode->vdisplay = native_mode->panel_yres; - - mode->htotal = mode->hdisplay + native_mode->hblank; - mode->hsync_start = mode->hdisplay + native_mode->hoverplus; - mode->hsync_end = mode->hsync_start + native_mode->hsync_width; - mode->vtotal = mode->vdisplay + native_mode->vblank; - mode->vsync_start = mode->vdisplay + native_mode->voverplus; - mode->vsync_end = mode->vsync_start + native_mode->vsync_width; - mode->clock = native_mode->dotclock; - mode->flags = 0; - + *mode = *native_mode; mode->type = DRM_MODE_TYPE_PREFERRED | DRM_MODE_TYPE_DRIVER; drm_mode_set_name(mode); @@ -210,7 +198,7 @@ static void radeon_add_common_modes(struct drm_encoder *encoder, struct drm_conn struct drm_device *dev = encoder->dev; struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); struct drm_display_mode *mode = NULL; - struct radeon_native_mode *native_mode = &radeon_encoder->native_mode; + struct drm_display_mode *native_mode = &radeon_encoder->native_mode; int i; struct mode_size { int w; @@ -237,10 +225,10 @@ static void radeon_add_common_modes(struct drm_encoder *encoder, struct drm_conn for (i = 0; i < 17; i++) { if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) { - if (common_modes[i].w > native_mode->panel_xres || - common_modes[i].h > native_mode->panel_yres || - (common_modes[i].w == native_mode->panel_xres && - common_modes[i].h == native_mode->panel_yres)) + if (common_modes[i].w > native_mode->hdisplay || + common_modes[i].h > native_mode->vdisplay || + (common_modes[i].w == native_mode->hdisplay && + common_modes[i].h == native_mode->vdisplay)) continue; } if (common_modes[i].w < 320 || common_modes[i].h < 200) @@ -344,28 +332,23 @@ static void radeon_fixup_lvds_native_mode(struct drm_encoder *encoder, struct drm_connector *connector) { struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); - struct radeon_native_mode *native_mode = &radeon_encoder->native_mode; + struct drm_display_mode *native_mode = &radeon_encoder->native_mode; /* Try to get native mode details from EDID if necessary */ - if (!native_mode->dotclock) { + if (!native_mode->clock) { struct drm_display_mode *t, *mode; list_for_each_entry_safe(mode, t, &connector->probed_modes, head) { - if (mode->hdisplay == native_mode->panel_xres && - mode->vdisplay == native_mode->panel_yres) { - native_mode->hblank = mode->htotal - mode->hdisplay; - native_mode->hoverplus = mode->hsync_start - mode->hdisplay; - native_mode->hsync_width = mode->hsync_end - mode->hsync_start; - native_mode->vblank = mode->vtotal - mode->vdisplay; - native_mode->voverplus = mode->vsync_start - mode->vdisplay; - native_mode->vsync_width = mode->vsync_end - mode->vsync_start; - native_mode->dotclock = mode->clock; + if (mode->hdisplay == native_mode->hdisplay && + mode->vdisplay == native_mode->vdisplay) { + *native_mode = *mode; + drm_mode_set_crtcinfo(native_mode, CRTC_INTERLACE_HALVE_V); DRM_INFO("Determined LVDS native mode details from EDID\n"); break; } } } - if (!native_mode->dotclock) { + if (!native_mode->clock) { DRM_INFO("No LVDS native mode details, disabling RMX\n"); radeon_encoder->rmx_type = RMX_OFF; } @@ -420,10 +403,10 @@ static enum drm_connector_status radeon_lvds_detect(struct drm_connector *connec if (encoder) { struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); - struct radeon_native_mode *native_mode = &radeon_encoder->native_mode; + struct drm_display_mode *native_mode = &radeon_encoder->native_mode; /* check if panel is valid */ - if (native_mode->panel_xres >= 320 && native_mode->panel_yres >= 240) + if (native_mode->hdisplay >= 320 && native_mode->vdisplay >= 240) ret = connector_status_connected; } diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index b8f2344..a20bf43 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -761,7 +761,7 @@ bool radeon_crtc_scaling_mode_fixup(struct drm_crtc *crtc, radeon_crtc->rmx_type = radeon_encoder->rmx_type; memcpy(&radeon_crtc->native_mode, &radeon_encoder->native_mode, - sizeof(struct radeon_native_mode)); + sizeof(struct drm_display_mode)); first = false; } else { if (radeon_crtc->rmx_type != radeon_encoder->rmx_type) { @@ -779,10 +779,10 @@ bool radeon_crtc_scaling_mode_fixup(struct drm_crtc *crtc, if (radeon_crtc->rmx_type != RMX_OFF) { fixed20_12 a, b; a.full = rfixed_const(crtc->mode.vdisplay); - b.full = rfixed_const(radeon_crtc->native_mode.panel_xres); + b.full = rfixed_const(radeon_crtc->native_mode.hdisplay); radeon_crtc->vsc.full = rfixed_div(a, b); a.full = rfixed_const(crtc->mode.hdisplay); - b.full = rfixed_const(radeon_crtc->native_mode.panel_yres); + b.full = rfixed_const(radeon_crtc->native_mode.vdisplay); radeon_crtc->hsc.full = rfixed_div(a, b); } else { radeon_crtc->vsc.full = rfixed_const(1); diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index 3e58c6e..a9d4e0a 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -171,49 +171,15 @@ void radeon_rmx_mode_fixup(struct drm_encoder *encoder, struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); struct drm_device *dev = encoder->dev; struct radeon_device *rdev = dev->dev_private; - struct radeon_native_mode *native_mode = &radeon_encoder->native_mode; - - if (mode->hdisplay < native_mode->panel_xres || - mode->vdisplay < native_mode->panel_yres) { - if (ASIC_IS_AVIVO(rdev)) { - adjusted_mode->hdisplay = native_mode->panel_xres; - adjusted_mode->vdisplay = native_mode->panel_yres; - adjusted_mode->htotal = native_mode->panel_xres + native_mode->hblank; - adjusted_mode->hsync_start = native_mode->panel_xres + native_mode->hoverplus; - adjusted_mode->hsync_end = adjusted_mode->hsync_start + native_mode->hsync_width; - adjusted_mode->vtotal = native_mode->panel_yres + native_mode->vblank; - adjusted_mode->vsync_start = native_mode->panel_yres + native_mode->voverplus; - adjusted_mode->vsync_end = adjusted_mode->vsync_start + native_mode->vsync_width; - /* update crtc values */ - drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V); - /* adjust crtc values */ - adjusted_mode->crtc_hdisplay = native_mode->panel_xres; - adjusted_mode->crtc_vdisplay = native_mode->panel_yres; - adjusted_mode->crtc_htotal = adjusted_mode->crtc_hdisplay + native_mode->hblank; - adjusted_mode->crtc_hsync_start = adjusted_mode->crtc_hdisplay + native_mode->hoverplus; - adjusted_mode->crtc_hsync_end = adjusted_mode->crtc_hsync_start + native_mode->hsync_width; - adjusted_mode->crtc_vtotal = adjusted_mode->crtc_vdisplay + native_mode->vblank; - adjusted_mode->crtc_vsync_start = adjusted_mode->crtc_vdisplay + native_mode->voverplus; - adjusted_mode->crtc_vsync_end = adjusted_mode->crtc_vsync_start + native_mode->vsync_width; - } else { - adjusted_mode->htotal = native_mode->panel_xres + native_mode->hblank; - adjusted_mode->hsync_start = native_mode->panel_xres + native_mode->hoverplus; - adjusted_mode->hsync_end = adjusted_mode->hsync_start + native_mode->hsync_width; - adjusted_mode->vtotal = native_mode->panel_yres + native_mode->vblank; - adjusted_mode->vsync_start = native_mode->panel_yres + native_mode->voverplus; - adjusted_mode->vsync_end = adjusted_mode->vsync_start + native_mode->vsync_width; - /* update crtc values */ - drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V); - /* adjust crtc values */ - adjusted_mode->crtc_htotal = adjusted_mode->crtc_hdisplay + native_mode->hblank; - adjusted_mode->crtc_hsync_start = adjusted_mode->crtc_hdisplay + native_mode->hoverplus; - adjusted_mode->crtc_hsync_end = adjusted_mode->crtc_hsync_start + native_mode->hsync_width; - adjusted_mode->crtc_vtotal = adjusted_mode->crtc_vdisplay + native_mode->vblank; - adjusted_mode->crtc_vsync_start = adjusted_mode->crtc_vdisplay + native_mode->voverplus; - adjusted_mode->crtc_vsync_end = adjusted_mode->crtc_vsync_start + native_mode->vsync_width; + struct drm_display_mode *native_mode = &radeon_encoder->native_mode; + + if (mode->hdisplay < native_mode->hdisplay || + mode->vdisplay < native_mode->vdisplay) { + *adjusted_mode = *native_mode; + if (!ASIC_IS_AVIVO(rdev)) { + adjusted_mode->hdisplay = mode->hdisplay; + adjusted_mode->vdisplay = mode->vdisplay; } - adjusted_mode->flags = native_mode->flags; - adjusted_mode->clock = native_mode->dotclock; } } diff --git a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c index ec2df73..d22a195 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c @@ -48,7 +48,7 @@ static void radeon_legacy_rmx_mode_set(struct drm_crtc *crtc, u32 fp_horz_stretch, fp_vert_stretch, fp_horz_vert_active; u32 fp_h_sync_strt_wid, fp_crtc_h_total_disp; u32 fp_v_sync_strt_wid, fp_crtc_v_total_disp; - struct radeon_native_mode *native_mode = &radeon_crtc->native_mode; + struct drm_display_mode *native_mode = &radeon_crtc->native_mode; fp_vert_stretch = RREG32(RADEON_FP_VERT_STRETCH) & (RADEON_VERT_STRETCH_RESERVED | @@ -95,19 +95,19 @@ static void radeon_legacy_rmx_mode_set(struct drm_crtc *crtc, fp_horz_vert_active = 0; - if (native_mode->panel_xres == 0 || - native_mode->panel_yres == 0) { + if (native_mode->hdisplay == 0 || + native_mode->vdisplay == 0) { hscale = false; vscale = false; } else { - if (xres > native_mode->panel_xres) - xres = native_mode->panel_xres; - if (yres > native_mode->panel_yres) - yres = native_mode->panel_yres; + if (xres > native_mode->hdisplay) + xres = native_mode->hdisplay; + if (yres > native_mode->vdisplay) + yres = native_mode->vdisplay; - if (xres == native_mode->panel_xres) + if (xres == native_mode->hdisplay) hscale = false; - if (yres == native_mode->panel_yres) + if (yres == native_mode->vdisplay) vscale = false; } @@ -119,11 +119,11 @@ static void radeon_legacy_rmx_mode_set(struct drm_crtc *crtc, else { inc = (fp_horz_stretch & RADEON_HORZ_AUTO_RATIO_INC) ? 1 : 0; scale = ((xres + inc) * RADEON_HORZ_STRETCH_RATIO_MAX) - / native_mode->panel_xres + 1; + / native_mode->hdisplay + 1; fp_horz_stretch |= (((scale) & RADEON_HORZ_STRETCH_RATIO_MASK) | RADEON_HORZ_STRETCH_BLEND | RADEON_HORZ_STRETCH_ENABLE | - ((native_mode->panel_xres/8-1) << 16)); + ((native_mode->hdisplay/8-1) << 16)); } if (!vscale) @@ -131,11 +131,11 @@ static void radeon_legacy_rmx_mode_set(struct drm_crtc *crtc, else { inc = (fp_vert_stretch & RADEON_VERT_AUTO_RATIO_INC) ? 1 : 0; scale = ((yres + inc) * RADEON_VERT_STRETCH_RATIO_MAX) - / native_mode->panel_yres + 1; + / native_mode->vdisplay + 1; fp_vert_stretch |= (((scale) & RADEON_VERT_STRETCH_RATIO_MASK) | RADEON_VERT_STRETCH_ENABLE | RADEON_VERT_STRETCH_BLEND | - ((native_mode->panel_yres-1) << 12)); + ((native_mode->vdisplay-1) << 12)); } break; case RMX_CENTER: @@ -175,8 +175,8 @@ static void radeon_legacy_rmx_mode_set(struct drm_crtc *crtc, ? RADEON_CRTC_V_SYNC_POL : 0))); - fp_horz_vert_active = (((native_mode->panel_yres) & 0xfff) | - (((native_mode->panel_xres / 8) & 0x1ff) << 16)); + fp_horz_vert_active = (((native_mode->vdisplay) & 0xfff) | + (((native_mode->hdisplay / 8) & 0x1ff) << 16)); break; case RMX_OFF: default: diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h index e612268..3d2631b 100644 --- a/drivers/gpu/drm/radeon/radeon_mode.h +++ b/drivers/gpu/drm/radeon/radeon_mode.h @@ -186,17 +186,6 @@ struct radeon_mode_info { }; -struct radeon_native_mode { - /* preferred mode */ - uint32_t panel_xres, panel_yres; - uint32_t hoverplus, hsync_width; - uint32_t hblank; - uint32_t voverplus, vsync_width; - uint32_t vblank; - uint32_t dotclock; - uint32_t flags; -}; - #define MAX_H_CODE_TIMING_LEN 32 #define MAX_V_CODE_TIMING_LEN 32 @@ -228,7 +217,7 @@ struct radeon_crtc { enum radeon_rmx_type rmx_type; fixed20_12 vsc; fixed20_12 hsc; - struct radeon_native_mode native_mode; + struct drm_display_mode native_mode; }; struct radeon_encoder_primary_dac { @@ -248,7 +237,7 @@ struct radeon_encoder_lvds { bool use_bios_dividers; uint32_t lvds_gen_cntl; /* panel mode */ - struct radeon_native_mode native_mode; + struct drm_display_mode native_mode; }; struct radeon_encoder_tv_dac { @@ -279,7 +268,7 @@ struct radeon_encoder_atom_dig { uint32_t lvds_misc; uint16_t panel_pwr_delay; /* panel mode */ - struct radeon_native_mode native_mode; + struct drm_display_mode native_mode; }; struct radeon_encoder_atom_dac { @@ -294,7 +283,7 @@ struct radeon_encoder { uint32_t flags; uint32_t pixel_clock; enum radeon_rmx_type rmx_type; - struct radeon_native_mode native_mode; + struct drm_display_mode native_mode; void *enc_priv; }; -- cgit v0.10.2 From 0549a061b545d232d12836f98c7c4965dd83f837 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 9 Oct 2009 18:41:19 -0400 Subject: drm/radeon/kms: also check for edid in lvds detect In case the system has bad native mode info but valid edid. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index da3a049..17d5659 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -398,8 +398,10 @@ static int radeon_lvds_mode_valid(struct drm_connector *connector, static enum drm_connector_status radeon_lvds_detect(struct drm_connector *connector) { - enum drm_connector_status ret = connector_status_disconnected; + struct radeon_connector *radeon_connector = to_radeon_connector(connector); struct drm_encoder *encoder = radeon_best_single_encoder(connector); + enum drm_connector_status ret = connector_status_disconnected; + bool dret; if (encoder) { struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); @@ -410,6 +412,15 @@ static enum drm_connector_status radeon_lvds_detect(struct drm_connector *connec ret = connector_status_connected; } + + /* check for edid as well */ + if (radeon_connector->ddc_bus) { + radeon_i2c_do_lock(radeon_connector, 1); + dret = radeon_ddc_probe(radeon_connector); + radeon_i2c_do_lock(radeon_connector, 0); + if (dret) + ret = connector_status_connected; + } /* check acpi lid status ??? */ radeon_connector_update_scratch_regs(connector, ret); -- cgit v0.10.2 From ceeb50279b3d05eb7ea2b67e90acb2110d09325f Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 12 Oct 2009 13:54:10 +1000 Subject: drm/radeon: Revert "drm/r600: avoid assigning vb twice in blit code" This reverts commit 49c458e544ae14514209ed80ea6829ca1b18ddf0. It seems to have some side effects in the non-kms cases. Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/r600_blit.c b/drivers/gpu/drm/radeon/r600_blit.c index dec5010..d988eec 100644 --- a/drivers/gpu/drm/radeon/r600_blit.c +++ b/drivers/gpu/drm/radeon/r600_blit.c @@ -582,6 +582,8 @@ r600_blit_copy(struct drm_device *dev, u64 vb_addr; u32 *vb; + vb = r600_nomm_get_vb_ptr(dev); + if ((size_bytes & 3) || (src_gpu_addr & 3) || (dst_gpu_addr & 3)) { max_bytes = 8192; @@ -617,8 +619,8 @@ r600_blit_copy(struct drm_device *dev, if (!dev_priv->blit_vb) return; set_shaders(dev); + vb = r600_nomm_get_vb_ptr(dev); } - vb = r600_nomm_get_vb_ptr(dev); vb[0] = i2f(dst_x); vb[1] = 0; @@ -706,8 +708,8 @@ r600_blit_copy(struct drm_device *dev, return; set_shaders(dev); + vb = r600_nomm_get_vb_ptr(dev); } - vb = r600_nomm_get_vb_ptr(dev); vb[0] = i2f(dst_x / 4); vb[1] = 0; @@ -775,6 +777,8 @@ r600_blit_swap(struct drm_device *dev, u64 vb_addr; u32 *vb; + vb = r600_nomm_get_vb_ptr(dev); + if ((dev_priv->blit_vb->used + 48) > dev_priv->blit_vb->total) { r600_nomm_put_vb(dev); @@ -783,8 +787,8 @@ r600_blit_swap(struct drm_device *dev, return; set_shaders(dev); + vb = r600_nomm_get_vb_ptr(dev); } - vb = r600_nomm_get_vb_ptr(dev); if (cpp == 4) { cb_format = COLOR_8_8_8_8; diff --git a/drivers/gpu/drm/radeon/r600_blit_kms.c b/drivers/gpu/drm/radeon/r600_blit_kms.c index 93108bb..acae33e 100644 --- a/drivers/gpu/drm/radeon/r600_blit_kms.c +++ b/drivers/gpu/drm/radeon/r600_blit_kms.c @@ -610,6 +610,7 @@ void r600_kms_blit_copy(struct radeon_device *rdev, DRM_DEBUG("emitting copy %16llx %16llx %d %d\n", src_gpu_addr, dst_gpu_addr, size_bytes, rdev->r600_blit.vb_used); + vb = (u32 *)(rdev->r600_blit.vb_ib->ptr + rdev->r600_blit.vb_used); if ((size_bytes & 3) || (src_gpu_addr & 3) || (dst_gpu_addr & 3)) { max_bytes = 8192; @@ -652,7 +653,6 @@ void r600_kms_blit_copy(struct radeon_device *rdev, vb = r600_nomm_get_vb_ptr(dev); #endif } - vb = (u32 *)(rdev->r600_blit.vb_ib->ptr + rdev->r600_blit.vb_used); vb[0] = i2f(dst_x); vb[1] = 0; @@ -747,7 +747,6 @@ void r600_kms_blit_copy(struct radeon_device *rdev, vb = r600_nomm_get_vb_ptr(dev); } #endif - vb = (u32 *)(rdev->r600_blit.vb_ib->ptr + rdev->r600_blit.vb_used); vb[0] = i2f(dst_x / 4); vb[1] = 0; -- cgit v0.10.2 From 39deb2d67515086f08a672e7574716ca0d3883a5 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 12 Oct 2009 14:21:19 +1000 Subject: drm/radeon/kms: fix use of index before proper initialisation. With the adjust table introduction, we need to fill out index before getting the table version. Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 7522af1..3409aa3 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -454,6 +454,7 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) radeon_compute_pll(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div, &ref_div, &post_div, pll_flags); + index = GetIndexIntoMasterTable(COMMAND, SetPixelClock); atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev); @@ -513,7 +514,6 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) } printk("executing set pll\n"); - index = GetIndexIntoMasterTable(COMMAND, SetPixelClock); atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); } -- cgit v0.10.2 From fb06ca8f8c61dfd7cbfa2092756577ff78a26dcd Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 12 Oct 2009 11:25:05 -0400 Subject: drm/radeon/kms: properly handle mode id with native mode changes drm modes are objects with indentifiers. Make sure to preserve the mode id when copying mode params. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index 17d5659..729207a 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -183,8 +183,7 @@ static struct drm_display_mode *radeon_fp_native_mode(struct drm_encoder *encode if (native_mode->hdisplay != 0 && native_mode->vdisplay != 0 && native_mode->clock != 0) { - mode = drm_mode_create(dev); - *mode = *native_mode; + mode = drm_mode_duplicate(dev, native_mode); mode->type = DRM_MODE_TYPE_PREFERRED | DRM_MODE_TYPE_DRIVER; drm_mode_set_name(mode); diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index a9d4e0a..10845f3 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -175,11 +175,13 @@ void radeon_rmx_mode_fixup(struct drm_encoder *encoder, if (mode->hdisplay < native_mode->hdisplay || mode->vdisplay < native_mode->vdisplay) { + int mode_id = adjusted_mode->base.id; *adjusted_mode = *native_mode; if (!ASIC_IS_AVIVO(rdev)) { adjusted_mode->hdisplay = mode->hdisplay; adjusted_mode->vdisplay = mode->vdisplay; } + adjusted_mode->base.id = mode_id; } } -- cgit v0.10.2 From 8e8b2d676f3f7c1246b108793fb5690e6c6fcd26 Mon Sep 17 00:00:00 2001 From: Eero Nurkkala Date: Mon, 12 Oct 2009 08:41:59 +0300 Subject: ASoC: Serialize access to dapm_power_widgets() Access to damp_power_widgets() is assumed to be single-threaded. Concurrent accesses to dapm_power_widgets() may result in unpredictable behavior. Calls from: close_delayed_work() soc_codec_close() soc_pcm_prepare() soc_suspend() soc_resume_deferred() to snd_soc_dapm_stream_event() do not have the codec->mutex taken to cover the call to dapm_power_widgets(). Thus, take the mutex in these paths also to assure single-threaded use of dapm_power_widgets(). Signed-off-by: Eero Nurkkala Signed-off-by: Mark Brown diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 8de6f9d..d89f6dc 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -2072,9 +2072,9 @@ int snd_soc_dapm_stream_event(struct snd_soc_codec *codec, } } } - mutex_unlock(&codec->mutex); dapm_power_widgets(codec, event); + mutex_unlock(&codec->mutex); dump_dapm(codec, __func__); return 0; } -- cgit v0.10.2 From 9216d44dc13b5e858253f06d83ceea25a9b72f4f Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Sat, 10 Oct 2009 15:20:55 +0800 Subject: drm/i915: disable FBC for Pineview, fixing a boot hang. Pineview doesn't have this FBC mechanism, so this code doesn't apply. Signed-off-by: Shaohua Li Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 92aeb91..e5b138b 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1227,8 +1227,7 @@ static int i915_load_modeset_init(struct drm_device *dev, goto out; /* Try to set up FBC with a reasonable compressed buffer size */ - if (IS_MOBILE(dev) && (IS_I9XX(dev) || IS_I965G(dev) || IS_GM45(dev)) && - i915_powersave) { + if (I915_HAS_FBC(dev) && i915_powersave) { int cfb_size; /* Try to get an 8M buffer... */ diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 6035d3d..0094f18 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -981,7 +981,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); #define HAS_FW_BLC(dev) (IS_I9XX(dev) || IS_G4X(dev) || IS_IGDNG(dev)) #define HAS_PIPE_CXSR(dev) (IS_G4X(dev) || IS_IGDNG(dev)) -#define I915_HAS_FBC(dev) (IS_MOBILE(dev) && (IS_I9XX(dev) || IS_I965G(dev))) +#define I915_HAS_FBC(dev) (IS_MOBILE(dev) && (IS_I9XX(dev) || IS_GM45(dev)) && !IS_IGD(dev)) #define PRIMARY_RINGBUFFER_SIZE (128*1024) -- cgit v0.10.2 From a3e17eb8f4080a79738a938abe718be255247a44 Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Sat, 10 Oct 2009 10:42:37 +0800 Subject: drm/i915: Set the LVDS_BORDER when using LVDS scaling mode According to the spec the LVDS_BORDER_ENABLE bit decides whether the border data should be included in the active display and data sent to the panel. Border should be used when in VGA centered (un-scaled) mode or when scaling a 4:3 source image to a wide screen panel (typical 16:9). So when the LVDS scaling is used, decide whether the LVDS_BORDER should be enabled or not according to the current scaling mode. At the same time fix the typo error in LVDS center scaling mode. https://bugs.freedesktop.org/show_bug.cgi?id=23789 Signed-off-by: Zhao Yakui tested-by: Zhao Jian Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 0094f18..17be01e 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -492,6 +492,8 @@ typedef struct drm_i915_private { struct drm_i915_gem_phys_object *phys_objs[I915_MAX_PHYS_OBJECT]; } mm; struct sdvo_device_mapping sdvo_mappings[2]; + /* indicate whether the LVDS_BORDER should be enabled or not */ + unsigned int lvds_border_bits; /* Reclocking support */ bool render_reclock_avail; diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 0466ddb..5f92724 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -968,6 +968,8 @@ #define LVDS_PORT_EN (1 << 31) /* Selects pipe B for LVDS data. Must be set on pre-965. */ #define LVDS_PIPEB_SELECT (1 << 30) +/* Enable border for unscaled (or aspect-scaled) display */ +#define LVDS_BORDER_ENABLE (1 << 15) /* * Enables the A0-A2 data pairs and CLKA, containing 18 bits of color data per * pixel. diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 3c14240..9efe117 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2936,6 +2936,8 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, lvds = I915_READ(lvds_reg); lvds |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP | LVDS_PIPEB_SELECT; + /* set the corresponsding LVDS_BORDER bit */ + lvds |= dev_priv->lvds_border_bits; /* Set the B0-B3 data pairs corresponding to whether we're going to * set the DPLLs for dual-channel mode or not. */ diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 98ae3d7..089f18c 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -380,7 +380,7 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder, adjusted_mode->crtc_vblank_start + vsync_pos; /* keep the vsync width constant */ adjusted_mode->crtc_vsync_end = - adjusted_mode->crtc_vblank_start + vsync_width; + adjusted_mode->crtc_vsync_start + vsync_width; border = 1; break; case DRM_MODE_SCALE_ASPECT: @@ -526,6 +526,14 @@ out: lvds_priv->pfit_control = pfit_control; lvds_priv->pfit_pgm_ratios = pfit_pgm_ratios; /* + * When there exists the border, it means that the LVDS_BORDR + * should be enabled. + */ + if (border) + dev_priv->lvds_border_bits |= LVDS_BORDER_ENABLE; + else + dev_priv->lvds_border_bits &= ~(LVDS_BORDER_ENABLE); + /* * XXX: It would be nice to support lower refresh rates on the * panels to reduce power consumption, and perhaps match the * user's requested refresh rate. -- cgit v0.10.2 From 06027f9111b9f3244ddc40752428f7847b0b867e Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Mon, 5 Oct 2009 13:47:26 -0700 Subject: drm/i915: Save and restore the GM45 FBC regs on suspend and resume. This hasn't fixed the regressions we were testing against, but clearly should be required. Signed-off-by: Jesse Barnes Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 17be01e..1254c4b 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -342,6 +342,7 @@ typedef struct drm_i915_private { u32 savePFIT_CONTROL; u32 save_palette_a[256]; u32 save_palette_b[256]; + u32 saveDPFC_CB_BASE; u32 saveFBC_CFB_BASE; u32 saveFBC_LL_BASE; u32 saveFBC_CONTROL; diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index bd6d8d9..660c5f3 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -437,10 +437,14 @@ void i915_save_display(struct drm_device *dev) /* FIXME: save TV & SDVO state */ /* FBC state */ - dev_priv->saveFBC_CFB_BASE = I915_READ(FBC_CFB_BASE); - dev_priv->saveFBC_LL_BASE = I915_READ(FBC_LL_BASE); - dev_priv->saveFBC_CONTROL2 = I915_READ(FBC_CONTROL2); - dev_priv->saveFBC_CONTROL = I915_READ(FBC_CONTROL); + if (IS_GM45(dev)) { + dev_priv->saveDPFC_CB_BASE = I915_READ(DPFC_CB_BASE); + } else { + dev_priv->saveFBC_CFB_BASE = I915_READ(FBC_CFB_BASE); + dev_priv->saveFBC_LL_BASE = I915_READ(FBC_LL_BASE); + dev_priv->saveFBC_CONTROL2 = I915_READ(FBC_CONTROL2); + dev_priv->saveFBC_CONTROL = I915_READ(FBC_CONTROL); + } /* VGA state */ dev_priv->saveVGA0 = I915_READ(VGA0); @@ -511,10 +515,16 @@ void i915_restore_display(struct drm_device *dev) /* FIXME: restore TV & SDVO state */ /* FBC info */ - I915_WRITE(FBC_CFB_BASE, dev_priv->saveFBC_CFB_BASE); - I915_WRITE(FBC_LL_BASE, dev_priv->saveFBC_LL_BASE); - I915_WRITE(FBC_CONTROL2, dev_priv->saveFBC_CONTROL2); - I915_WRITE(FBC_CONTROL, dev_priv->saveFBC_CONTROL); + if (IS_GM45(dev)) { + g4x_disable_fbc(dev); + I915_WRITE(DPFC_CB_BASE, dev_priv->saveDPFC_CB_BASE); + } else { + i8xx_disable_fbc(dev); + I915_WRITE(FBC_CFB_BASE, dev_priv->saveFBC_CFB_BASE); + I915_WRITE(FBC_LL_BASE, dev_priv->saveFBC_LL_BASE); + I915_WRITE(FBC_CONTROL2, dev_priv->saveFBC_CONTROL2); + I915_WRITE(FBC_CONTROL, dev_priv->saveFBC_CONTROL); + } /* VGA state */ I915_WRITE(VGACNTRL, dev_priv->saveVGACNTRL); -- cgit v0.10.2 From 29e4e025be52c0619b9dfe6faba29bc3deac6272 Mon Sep 17 00:00:00 2001 From: Takao Indoh Date: Thu, 1 Oct 2009 17:55:16 -0400 Subject: [IA64] Restore registers in the stack on INIT Registers are not saved anywhere when INIT comes during fsys mode and we cannot know what happened when we investigate vmcore captured by kdump. This patch adds new function finish_pt_regs() so registers can be saved in such a case. Signed-off-by: Takao Indoh Signed-off-by: Tony Luck diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index d2877a7..496ac7a 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -887,6 +887,60 @@ ia64_mca_modify_comm(const struct task_struct *previous_current) memcpy(current->comm, comm, sizeof(current->comm)); } +static void +finish_pt_regs(struct pt_regs *regs, const pal_min_state_area_t *ms, + unsigned long *nat) +{ + const u64 *bank; + + /* If ipsr.ic then use pmsa_{iip,ipsr,ifs}, else use + * pmsa_{xip,xpsr,xfs} + */ + if (ia64_psr(regs)->ic) { + regs->cr_iip = ms->pmsa_iip; + regs->cr_ipsr = ms->pmsa_ipsr; + regs->cr_ifs = ms->pmsa_ifs; + } else { + regs->cr_iip = ms->pmsa_xip; + regs->cr_ipsr = ms->pmsa_xpsr; + regs->cr_ifs = ms->pmsa_xfs; + } + regs->pr = ms->pmsa_pr; + regs->b0 = ms->pmsa_br0; + regs->ar_rsc = ms->pmsa_rsc; + copy_reg(&ms->pmsa_gr[1-1], ms->pmsa_nat_bits, ®s->r1, nat); + copy_reg(&ms->pmsa_gr[2-1], ms->pmsa_nat_bits, ®s->r2, nat); + copy_reg(&ms->pmsa_gr[3-1], ms->pmsa_nat_bits, ®s->r3, nat); + copy_reg(&ms->pmsa_gr[8-1], ms->pmsa_nat_bits, ®s->r8, nat); + copy_reg(&ms->pmsa_gr[9-1], ms->pmsa_nat_bits, ®s->r9, nat); + copy_reg(&ms->pmsa_gr[10-1], ms->pmsa_nat_bits, ®s->r10, nat); + copy_reg(&ms->pmsa_gr[11-1], ms->pmsa_nat_bits, ®s->r11, nat); + copy_reg(&ms->pmsa_gr[12-1], ms->pmsa_nat_bits, ®s->r12, nat); + copy_reg(&ms->pmsa_gr[13-1], ms->pmsa_nat_bits, ®s->r13, nat); + copy_reg(&ms->pmsa_gr[14-1], ms->pmsa_nat_bits, ®s->r14, nat); + copy_reg(&ms->pmsa_gr[15-1], ms->pmsa_nat_bits, ®s->r15, nat); + if (ia64_psr(regs)->bn) + bank = ms->pmsa_bank1_gr; + else + bank = ms->pmsa_bank0_gr; + copy_reg(&bank[16-16], ms->pmsa_nat_bits, ®s->r16, nat); + copy_reg(&bank[17-16], ms->pmsa_nat_bits, ®s->r17, nat); + copy_reg(&bank[18-16], ms->pmsa_nat_bits, ®s->r18, nat); + copy_reg(&bank[19-16], ms->pmsa_nat_bits, ®s->r19, nat); + copy_reg(&bank[20-16], ms->pmsa_nat_bits, ®s->r20, nat); + copy_reg(&bank[21-16], ms->pmsa_nat_bits, ®s->r21, nat); + copy_reg(&bank[22-16], ms->pmsa_nat_bits, ®s->r22, nat); + copy_reg(&bank[23-16], ms->pmsa_nat_bits, ®s->r23, nat); + copy_reg(&bank[24-16], ms->pmsa_nat_bits, ®s->r24, nat); + copy_reg(&bank[25-16], ms->pmsa_nat_bits, ®s->r25, nat); + copy_reg(&bank[26-16], ms->pmsa_nat_bits, ®s->r26, nat); + copy_reg(&bank[27-16], ms->pmsa_nat_bits, ®s->r27, nat); + copy_reg(&bank[28-16], ms->pmsa_nat_bits, ®s->r28, nat); + copy_reg(&bank[29-16], ms->pmsa_nat_bits, ®s->r29, nat); + copy_reg(&bank[30-16], ms->pmsa_nat_bits, ®s->r30, nat); + copy_reg(&bank[31-16], ms->pmsa_nat_bits, ®s->r31, nat); +} + /* On entry to this routine, we are running on the per cpu stack, see * mca_asm.h. The original stack has not been touched by this event. Some of * the original stack's registers will be in the RBS on this stack. This stack @@ -921,7 +975,6 @@ ia64_mca_modify_original_stack(struct pt_regs *regs, u64 r12 = ms->pmsa_gr[12-1], r13 = ms->pmsa_gr[13-1]; u64 ar_bspstore = regs->ar_bspstore; u64 ar_bsp = regs->ar_bspstore + (loadrs >> 16); - const u64 *bank; const char *msg; int cpu = smp_processor_id(); @@ -1024,54 +1077,9 @@ ia64_mca_modify_original_stack(struct pt_regs *regs, p = (char *)r12 - sizeof(*regs); old_regs = (struct pt_regs *)p; memcpy(old_regs, regs, sizeof(*regs)); - /* If ipsr.ic then use pmsa_{iip,ipsr,ifs}, else use - * pmsa_{xip,xpsr,xfs} - */ - if (ia64_psr(regs)->ic) { - old_regs->cr_iip = ms->pmsa_iip; - old_regs->cr_ipsr = ms->pmsa_ipsr; - old_regs->cr_ifs = ms->pmsa_ifs; - } else { - old_regs->cr_iip = ms->pmsa_xip; - old_regs->cr_ipsr = ms->pmsa_xpsr; - old_regs->cr_ifs = ms->pmsa_xfs; - } - old_regs->pr = ms->pmsa_pr; - old_regs->b0 = ms->pmsa_br0; old_regs->loadrs = loadrs; - old_regs->ar_rsc = ms->pmsa_rsc; old_unat = old_regs->ar_unat; - copy_reg(&ms->pmsa_gr[1-1], ms->pmsa_nat_bits, &old_regs->r1, &old_unat); - copy_reg(&ms->pmsa_gr[2-1], ms->pmsa_nat_bits, &old_regs->r2, &old_unat); - copy_reg(&ms->pmsa_gr[3-1], ms->pmsa_nat_bits, &old_regs->r3, &old_unat); - copy_reg(&ms->pmsa_gr[8-1], ms->pmsa_nat_bits, &old_regs->r8, &old_unat); - copy_reg(&ms->pmsa_gr[9-1], ms->pmsa_nat_bits, &old_regs->r9, &old_unat); - copy_reg(&ms->pmsa_gr[10-1], ms->pmsa_nat_bits, &old_regs->r10, &old_unat); - copy_reg(&ms->pmsa_gr[11-1], ms->pmsa_nat_bits, &old_regs->r11, &old_unat); - copy_reg(&ms->pmsa_gr[12-1], ms->pmsa_nat_bits, &old_regs->r12, &old_unat); - copy_reg(&ms->pmsa_gr[13-1], ms->pmsa_nat_bits, &old_regs->r13, &old_unat); - copy_reg(&ms->pmsa_gr[14-1], ms->pmsa_nat_bits, &old_regs->r14, &old_unat); - copy_reg(&ms->pmsa_gr[15-1], ms->pmsa_nat_bits, &old_regs->r15, &old_unat); - if (ia64_psr(old_regs)->bn) - bank = ms->pmsa_bank1_gr; - else - bank = ms->pmsa_bank0_gr; - copy_reg(&bank[16-16], ms->pmsa_nat_bits, &old_regs->r16, &old_unat); - copy_reg(&bank[17-16], ms->pmsa_nat_bits, &old_regs->r17, &old_unat); - copy_reg(&bank[18-16], ms->pmsa_nat_bits, &old_regs->r18, &old_unat); - copy_reg(&bank[19-16], ms->pmsa_nat_bits, &old_regs->r19, &old_unat); - copy_reg(&bank[20-16], ms->pmsa_nat_bits, &old_regs->r20, &old_unat); - copy_reg(&bank[21-16], ms->pmsa_nat_bits, &old_regs->r21, &old_unat); - copy_reg(&bank[22-16], ms->pmsa_nat_bits, &old_regs->r22, &old_unat); - copy_reg(&bank[23-16], ms->pmsa_nat_bits, &old_regs->r23, &old_unat); - copy_reg(&bank[24-16], ms->pmsa_nat_bits, &old_regs->r24, &old_unat); - copy_reg(&bank[25-16], ms->pmsa_nat_bits, &old_regs->r25, &old_unat); - copy_reg(&bank[26-16], ms->pmsa_nat_bits, &old_regs->r26, &old_unat); - copy_reg(&bank[27-16], ms->pmsa_nat_bits, &old_regs->r27, &old_unat); - copy_reg(&bank[28-16], ms->pmsa_nat_bits, &old_regs->r28, &old_unat); - copy_reg(&bank[29-16], ms->pmsa_nat_bits, &old_regs->r29, &old_unat); - copy_reg(&bank[30-16], ms->pmsa_nat_bits, &old_regs->r30, &old_unat); - copy_reg(&bank[31-16], ms->pmsa_nat_bits, &old_regs->r31, &old_unat); + finish_pt_regs(old_regs, ms, &old_unat); /* Next stack a struct switch_stack. mca_asm.S built a partial * switch_stack, copy it and fill in the blanks using pt_regs and @@ -1141,6 +1149,8 @@ ia64_mca_modify_original_stack(struct pt_regs *regs, no_mod: mprintk(KERN_INFO "cpu %d, %s %s, original stack not modified\n", smp_processor_id(), type, msg); + old_unat = regs->ar_unat; + finish_pt_regs(regs, ms, &old_unat); return previous_current; } -- cgit v0.10.2 From dec1798f81f7e8a299734bdc29197ae77bf08018 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Sat, 10 Oct 2009 22:21:59 +0200 Subject: [IA64] unsigned cannot be less than 0 in sn_hwperf_ioctl() struct sn_hwperf_ioctl_args member arg (u64) cannot be less than 0. Signed-off-by: Roel Kluin Signed-off-by: Andrew Morton Signed-off-by: Tony Luck diff --git a/arch/ia64/sn/kernel/sn2/sn_hwperf.c b/arch/ia64/sn/kernel/sn2/sn_hwperf.c index 4c7e747..55ac3c4 100644 --- a/arch/ia64/sn/kernel/sn2/sn_hwperf.c +++ b/arch/ia64/sn/kernel/sn2/sn_hwperf.c @@ -786,17 +786,18 @@ sn_hwperf_ioctl(struct inode *in, struct file *fp, u32 op, unsigned long arg) break; case SN_HWPERF_GET_OBJ_NODE: - if (a.sz != sizeof(u64) || a.arg < 0) { + i = a.arg; + if (a.sz != sizeof(u64) || i < 0) { r = -EINVAL; goto error; } if ((r = sn_hwperf_enum_objects(&nobj, &objs)) == 0) { - if (a.arg >= nobj) { + if (i >= nobj) { r = -EINVAL; vfree(objs); goto error; } - if (objs[(i = a.arg)].id != a.arg) { + if (objs[i].id != a.arg) { for (i = 0; i < nobj; i++) { if (objs[i].id == a.arg) break; -- cgit v0.10.2 From 181a5336d6cc836f05507410d66988c483ad0154 Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Tue, 13 Oct 2009 10:40:52 -0700 Subject: drm/i915: Fix render reclock availability detection. If the device didn't support EDP, we would bail out too soon. Signed-off-by: Andy Lutomirski [anholt: Pulled this patch out of the patch for adding quirks to enable reclocking.] Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c index 4337414..96cd256 100644 --- a/drivers/gpu/drm/i915/intel_bios.c +++ b/drivers/gpu/drm/i915/intel_bios.c @@ -351,20 +351,18 @@ parse_driver_features(struct drm_i915_private *dev_priv, struct drm_device *dev = dev_priv->dev; struct bdb_driver_features *driver; - /* set default for chips without eDP */ - if (!SUPPORTS_EDP(dev)) { - dev_priv->edp_support = 0; - return; - } - driver = find_section(bdb, BDB_DRIVER_FEATURES); if (!driver) return; - if (driver->lvds_config == BDB_DRIVER_FEATURE_EDP) + if (driver && SUPPORTS_EDP(dev) && + driver->lvds_config == BDB_DRIVER_FEATURE_EDP) { dev_priv->edp_support = 1; + } else { + dev_priv->edp_support = 0; + } - if (driver->dual_frequency) + if (driver && driver->dual_frequency) dev_priv->render_reclock_avail = true; } -- cgit v0.10.2 From adcd740341dbd58eb94a8c2885c171ce9eb8677c Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Mon, 12 Oct 2009 08:24:30 -0600 Subject: [IA64] Require SAL 3.2 in order to do extended config space ops We had assumed that SAL firmware would return an error if it didn't understand extended config space. Unfortunately, the SAL on the SGI 750 doesn't do that, it panics the machine. So, condition the extended PCI config space accesses on SAL revision 3.2. Signed-off-by: Matthew Wilcox Tested-by: Brad Spengler Signed-off-by: Tony Luck diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c index 7de76dd..c0fca2c 100644 --- a/arch/ia64/pci/pci.c +++ b/arch/ia64/pci/pci.c @@ -56,10 +56,13 @@ int raw_pci_read(unsigned int seg, unsigned int bus, unsigned int devfn, if ((seg | reg) <= 255) { addr = PCI_SAL_ADDRESS(seg, bus, devfn, reg); mode = 0; - } else { + } else if (sal_revision >= SAL_VERSION_CODE(3,2)) { addr = PCI_SAL_EXT_ADDRESS(seg, bus, devfn, reg); mode = 1; + } else { + return -EINVAL; } + result = ia64_sal_pci_config_read(addr, mode, len, &data); if (result != 0) return -EINVAL; @@ -80,9 +83,11 @@ int raw_pci_write(unsigned int seg, unsigned int bus, unsigned int devfn, if ((seg | reg) <= 255) { addr = PCI_SAL_ADDRESS(seg, bus, devfn, reg); mode = 0; - } else { + } else if (sal_revision >= SAL_VERSION_CODE(3,2)) { addr = PCI_SAL_EXT_ADDRESS(seg, bus, devfn, reg); mode = 1; + } else { + return -EINVAL; } result = ia64_sal_pci_config_write(addr, mode, len, value); if (result != 0) -- cgit v0.10.2 From c03342fa6d4617a77cb867ee0ec71665d520eb69 Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Tue, 29 Sep 2009 11:01:23 +0800 Subject: drm/i915: disable powersave feature for Ironlake currently Until we figure out the right setting for powersave features on Ironlake, disable it for now. Also disable watermark update, which has new registers for it on Ironlake too. Signed-off-by: Zhenyu Wang Reviewed-by: Jesse Barnes [anholt: Resolved against the Pineview FBC changes] Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 1254c4b..24e154e 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -984,7 +984,10 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); #define HAS_FW_BLC(dev) (IS_I9XX(dev) || IS_G4X(dev) || IS_IGDNG(dev)) #define HAS_PIPE_CXSR(dev) (IS_G4X(dev) || IS_IGDNG(dev)) -#define I915_HAS_FBC(dev) (IS_MOBILE(dev) && (IS_I9XX(dev) || IS_GM45(dev)) && !IS_IGD(dev)) +#define I915_HAS_FBC(dev) (IS_MOBILE(dev) && \ + (IS_I9XX(dev) || IS_GM45(dev)) && \ + !IS_IGD(dev) && \ + !IS_IGDNG(dev)) #define PRIMARY_RINGBUFFER_SIZE (128*1024) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 9efe117..be7fada 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2586,6 +2586,9 @@ static void intel_update_watermarks(struct drm_device *dev) unsigned long planea_clock = 0, planeb_clock = 0, sr_clock = 0; int enabled = 0, pixel_size = 0; + if (!dev_priv->display.update_wm) + return; + /* Get the clock config from both planes */ list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { intel_crtc = to_intel_crtc(crtc); @@ -4126,7 +4129,9 @@ void intel_init_clock_gating(struct drm_device *dev) * Disable clock gating reported to work incorrectly according to the * specs, but enable as much else as we can. */ - if (IS_G4X(dev)) { + if (IS_IGDNG(dev)) { + return; + } else if (IS_G4X(dev)) { uint32_t dspclk_gate; I915_WRITE(RENCLK_GATE_D1, 0); I915_WRITE(RENCLK_GATE_D2, VF_UNIT_CLOCK_GATE_DISABLE | @@ -4214,7 +4219,9 @@ static void intel_init_display(struct drm_device *dev) i830_get_display_clock_speed; /* For FIFO watermark updates */ - if (IS_G4X(dev)) + if (IS_IGDNG(dev)) + dev_priv->display.update_wm = NULL; + else if (IS_G4X(dev)) dev_priv->display.update_wm = g4x_update_wm; else if (IS_I965G(dev)) dev_priv->display.update_wm = i965_update_wm; -- cgit v0.10.2 From 58a27471d00dc09945cbcfbbc5cbcdcd3c28211d Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Fri, 25 Sep 2009 08:01:28 +0000 Subject: drm/i915: Fix FDI M/N setting according with correct color depth FDI M/N calculation hasn't taken the current pipe color depth into account, but always set as 24bpp. This one checks current pipe color depth setting, and change FDI M/N calculation a little to use bits_per_pixel first, then convert to bytes_per_pixel later. This fixes display corrupt issue on Arrandle LVDS with 1600x900 panel in 18bpp dual-channel mode. Cc: Stable Team Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 5f92724..0dd87a7 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -1782,6 +1782,11 @@ #define PIPE_START_VBLANK_INTERRUPT_STATUS (1UL<<2) /* 965 or later */ #define PIPE_VBLANK_INTERRUPT_STATUS (1UL<<1) #define PIPE_OVERLAY_UPDATED_STATUS (1UL<<0) +#define PIPE_BPC_MASK (7 << 5) /* Ironlake */ +#define PIPE_8BPC (0 << 5) +#define PIPE_10BPC (1 << 5) +#define PIPE_6BPC (2 << 5) +#define PIPE_12BPC (3 << 5) #define DSPARB 0x70030 #define DSPARB_CSTART_MASK (0x7f << 7) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index be7fada..8278d9d 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2082,7 +2082,7 @@ fdi_reduce_ratio(u32 *num, u32 *den) #define LINK_N 0x80000 static void -igdng_compute_m_n(int bytes_per_pixel, int nlanes, +igdng_compute_m_n(int bits_per_pixel, int nlanes, int pixel_clock, int link_clock, struct fdi_m_n *m_n) { @@ -2092,7 +2092,8 @@ igdng_compute_m_n(int bytes_per_pixel, int nlanes, temp = (u64) DATA_N * pixel_clock; temp = div_u64(temp, link_clock); - m_n->gmch_m = div_u64(temp * bytes_per_pixel, nlanes); + m_n->gmch_m = div_u64(temp * bits_per_pixel, nlanes); + m_n->gmch_m >>= 3; /* convert to bytes_per_pixel */ m_n->gmch_n = DATA_N; fdi_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n); @@ -2766,7 +2767,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, /* FDI link */ if (IS_IGDNG(dev)) { - int lane, link_bw; + int lane, link_bw, bpp; /* eDP doesn't require FDI link, so just set DP M/N according to current link config */ if (is_edp) { @@ -2785,7 +2786,29 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, lane = 4; link_bw = 270000; } - igdng_compute_m_n(3, lane, target_clock, + + /* determine panel color depth */ + temp = I915_READ(pipeconf_reg); + + switch (temp & PIPE_BPC_MASK) { + case PIPE_8BPC: + bpp = 24; + break; + case PIPE_10BPC: + bpp = 30; + break; + case PIPE_6BPC: + bpp = 18; + break; + case PIPE_12BPC: + bpp = 36; + break; + default: + DRM_ERROR("unknown pipe bpc value\n"); + bpp = 24; + } + + igdng_compute_m_n(bpp, lane, target_clock, link_bw, &m_n); } -- cgit v0.10.2 From 54f8dd3c99052456a65bd26aa3313f57cd145a73 Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Fri, 18 Sep 2009 12:48:12 -0700 Subject: [IA64] use printk_once() unaligned.c/io_common.c Use printk_once() in a couple of places. Signed-off-by: Marcin Slusarz Signed-off-by: Andrew Morton Signed-off-by: Tony Luck diff --git a/arch/ia64/kernel/unaligned.c b/arch/ia64/kernel/unaligned.c index 6db0859..776dd40 100644 --- a/arch/ia64/kernel/unaligned.c +++ b/arch/ia64/kernel/unaligned.c @@ -60,7 +60,6 @@ dump (const char *str, void *vp, size_t len) */ int no_unaligned_warning; int unaligned_dump_stack; -static int noprint_warning; /* * For M-unit: @@ -1357,9 +1356,8 @@ ia64_handle_unaligned (unsigned long ifa, struct pt_regs *regs) /* watch for command names containing %s */ printk(KERN_WARNING "%s", buf); } else { - if (no_unaligned_warning && !noprint_warning) { - noprint_warning = 1; - printk(KERN_WARNING "%s(%d) encountered an " + if (no_unaligned_warning) { + printk_once(KERN_WARNING "%s(%d) encountered an " "unaligned exception which required\n" "kernel assistance, which degrades " "the performance of the application.\n" diff --git a/arch/ia64/sn/kernel/io_common.c b/arch/ia64/sn/kernel/io_common.c index 25831c4..308e659 100644 --- a/arch/ia64/sn/kernel/io_common.c +++ b/arch/ia64/sn/kernel/io_common.c @@ -119,7 +119,6 @@ sn_pcidev_info_get(struct pci_dev *dev) * Additionally note that the struct sn_flush_device_war also has to be * removed from arch/ia64/sn/include/xtalk/hubdev.h */ -static u8 war_implemented = 0; static s64 sn_device_fixup_war(u64 nasid, u64 widget, int device, struct sn_flush_device_common *common) @@ -128,11 +127,8 @@ static s64 sn_device_fixup_war(u64 nasid, u64 widget, int device, struct sn_flush_device_war *dev_entry; struct ia64_sal_retval isrv = {0,0,0,0}; - if (!war_implemented) { - printk(KERN_WARNING "PROM version < 4.50 -- implementing old " - "PROM flush WAR\n"); - war_implemented = 1; - } + printk_once(KERN_WARNING + "PROM version < 4.50 -- implementing old PROM flush WAR\n"); war_list = kzalloc(DEV_PER_WIDGET * sizeof(*war_list), GFP_KERNEL); BUG_ON(!war_list); -- cgit v0.10.2 From 1502f08edc040b6ba4b986454416564088995e79 Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Mon, 12 Oct 2009 09:51:41 -0700 Subject: [IA64] SMT friendly version of spin_unlock_wait() We can be kinder to SMT systems in spin_unlock_wait. Signed-off-by: Tony Luck diff --git a/arch/ia64/include/asm/spinlock.h b/arch/ia64/include/asm/spinlock.h index 4fa5027..239ecdc 100644 --- a/arch/ia64/include/asm/spinlock.h +++ b/arch/ia64/include/asm/spinlock.h @@ -75,6 +75,20 @@ static __always_inline void __ticket_spin_unlock(raw_spinlock_t *lock) ACCESS_ONCE(*p) = (tmp + 2) & ~1; } +static __always_inline void __ticket_spin_unlock_wait(raw_spinlock_t *lock) +{ + int *p = (int *)&lock->lock, ticket; + + ia64_invala(); + + for (;;) { + asm volatile ("ld4.c.nc %0=[%1]" : "=r"(ticket) : "r"(p) : "memory"); + if (!(((ticket >> TICKET_SHIFT) ^ ticket) & TICKET_MASK)) + return; + cpu_relax(); + } +} + static inline int __ticket_spin_is_locked(raw_spinlock_t *lock) { long tmp = ACCESS_ONCE(lock->lock); @@ -123,8 +137,7 @@ static __always_inline void __raw_spin_lock_flags(raw_spinlock_t *lock, static inline void __raw_spin_unlock_wait(raw_spinlock_t *lock) { - while (__raw_spin_is_locked(lock)) - cpu_relax(); + __ticket_spin_unlock_wait(lock); } #define __raw_read_can_lock(rw) (*(volatile int *)(rw) >= 0) -- cgit v0.10.2 From 4b7348a15972274eb16182d10987f69da3e95719 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 14 Oct 2009 18:25:23 +0200 Subject: ALSA: hda - Fix capture source checks for ALC662/663 codecs The ALC662/663 parser calls wrongly alc880_auto_create_input_ctls() to check the capture source selections. This should be alc882, instead. Reference: Novell bnc#546918 http://bugzilla.novell.com/show_bug.cgi?id=546918 Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index c08ca66..9b1cff8 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -17374,7 +17374,7 @@ static int alc662_auto_create_extra_out(struct hda_codec *codec, hda_nid_t pin, /* create playback/capture controls for input pins */ #define alc662_auto_create_input_ctls \ - alc880_auto_create_input_ctls + alc882_auto_create_input_ctls static void alc662_auto_set_output_and_unmute(struct hda_codec *codec, hda_nid_t nid, int pin_type, -- cgit v0.10.2 From 8c2a6d730400e14bf28ccfa11b9bbf453db775ec Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 14 Oct 2009 02:00:42 -0400 Subject: drm/radeon/kms: move active_device setup into encoder fixup() radeon_encoder->active_device defines the active routing between the encoder and connector. The encoder fixup and dpms functions need to know the active_device to function properly. Setting active_device in the prepare hook was too late in some cases. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index 10845f3..6cdef27 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -194,6 +194,8 @@ static bool radeon_atom_mode_fixup(struct drm_encoder *encoder, struct drm_device *dev = encoder->dev; struct radeon_device *rdev = dev->dev_private; + /* set the active encoder to connector routing */ + radeon_encoder_set_active_device(encoder); drm_mode_set_crtcinfo(adjusted_mode, 0); if (radeon_encoder->rmx_type != RMX_OFF) @@ -860,16 +862,9 @@ radeon_atom_encoder_dpms(struct drm_encoder *encoder, int mode) DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION args; int index = 0; bool is_dig = false; - int devices; memset(&args, 0, sizeof(args)); - /* on DPMS off we have no idea if active device is meaningful */ - if (mode != DRM_MODE_DPMS_ON && !radeon_encoder->active_device) - devices = radeon_encoder->devices; - else - devices = radeon_encoder->active_device; - DRM_DEBUG("encoder dpms %d to mode %d, devices %08x, active_devices %08x\n", radeon_encoder->encoder_id, mode, radeon_encoder->devices, radeon_encoder->active_device); @@ -900,18 +895,18 @@ radeon_atom_encoder_dpms(struct drm_encoder *encoder, int mode) break; case ENCODER_OBJECT_ID_INTERNAL_DAC1: case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1: - if (devices & (ATOM_DEVICE_TV_SUPPORT)) + if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT)) index = GetIndexIntoMasterTable(COMMAND, TV1OutputControl); - else if (devices & (ATOM_DEVICE_CV_SUPPORT)) + else if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT)) index = GetIndexIntoMasterTable(COMMAND, CV1OutputControl); else index = GetIndexIntoMasterTable(COMMAND, DAC1OutputControl); break; case ENCODER_OBJECT_ID_INTERNAL_DAC2: case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2: - if (devices & (ATOM_DEVICE_TV_SUPPORT)) + if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT)) index = GetIndexIntoMasterTable(COMMAND, TV1OutputControl); - else if (devices & (ATOM_DEVICE_CV_SUPPORT)) + else if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT)) index = GetIndexIntoMasterTable(COMMAND, CV1OutputControl); else index = GetIndexIntoMasterTable(COMMAND, DAC2OutputControl); @@ -1254,8 +1249,6 @@ static void radeon_atom_encoder_prepare(struct drm_encoder *encoder) { radeon_atom_output_lock(encoder, true); radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_OFF); - - radeon_encoder_set_active_device(encoder); } static void radeon_atom_encoder_commit(struct drm_encoder *encoder) diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c index 6ceb958..3a75b5b 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c @@ -107,8 +107,6 @@ static void radeon_legacy_lvds_prepare(struct drm_encoder *encoder) else radeon_combios_output_lock(encoder, true); radeon_legacy_lvds_dpms(encoder, DRM_MODE_DPMS_OFF); - - radeon_encoder_set_active_device(encoder); } static void radeon_legacy_lvds_commit(struct drm_encoder *encoder) @@ -192,6 +190,8 @@ static bool radeon_legacy_lvds_mode_fixup(struct drm_encoder *encoder, { struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); + /* set the active encoder to connector routing */ + radeon_encoder_set_active_device(encoder); drm_mode_set_crtcinfo(adjusted_mode, 0); if (radeon_encoder->rmx_type != RMX_OFF) @@ -218,7 +218,8 @@ static bool radeon_legacy_primary_dac_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { - + /* set the active encoder to connector routing */ + radeon_encoder_set_active_device(encoder); drm_mode_set_crtcinfo(adjusted_mode, 0); return true; @@ -272,7 +273,6 @@ static void radeon_legacy_primary_dac_prepare(struct drm_encoder *encoder) else radeon_combios_output_lock(encoder, true); radeon_legacy_primary_dac_dpms(encoder, DRM_MODE_DPMS_OFF); - radeon_encoder_set_active_device(encoder); } static void radeon_legacy_primary_dac_commit(struct drm_encoder *encoder) @@ -468,7 +468,6 @@ static void radeon_legacy_tmds_int_prepare(struct drm_encoder *encoder) else radeon_combios_output_lock(encoder, true); radeon_legacy_tmds_int_dpms(encoder, DRM_MODE_DPMS_OFF); - radeon_encoder_set_active_device(encoder); } static void radeon_legacy_tmds_int_commit(struct drm_encoder *encoder) @@ -593,7 +592,8 @@ static bool radeon_legacy_tmds_ext_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { - + /* set the active encoder to connector routing */ + radeon_encoder_set_active_device(encoder); drm_mode_set_crtcinfo(adjusted_mode, 0); return true; @@ -636,7 +636,6 @@ static void radeon_legacy_tmds_ext_prepare(struct drm_encoder *encoder) else radeon_combios_output_lock(encoder, true); radeon_legacy_tmds_ext_dpms(encoder, DRM_MODE_DPMS_OFF); - radeon_encoder_set_active_device(encoder); } static void radeon_legacy_tmds_ext_commit(struct drm_encoder *encoder) @@ -735,7 +734,8 @@ static bool radeon_legacy_tv_dac_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { - + /* set the active encoder to connector routing */ + radeon_encoder_set_active_device(encoder); drm_mode_set_crtcinfo(adjusted_mode, 0); return true; @@ -839,7 +839,6 @@ static void radeon_legacy_tv_dac_prepare(struct drm_encoder *encoder) else radeon_combios_output_lock(encoder, true); radeon_legacy_tv_dac_dpms(encoder, DRM_MODE_DPMS_OFF); - radeon_encoder_set_active_device(encoder); } static void radeon_legacy_tv_dac_commit(struct drm_encoder *encoder) -- cgit v0.10.2 From 1b4d7d75ccff38008ccd40f8e2d74e33a087caaa Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 15 Oct 2009 01:33:35 -0400 Subject: drm/radeon/kms: fix internal tmds setup on legacy display engine - crtc 0 routing was wrong - need to clear various timing bits in FP_GEN_CNTL - need to set FP_H/V2_SYNC_STRT_WID regs for crtc 1 Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c index d22a195..8d0b7aa 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c @@ -668,6 +668,9 @@ static bool radeon_set_crtc_timing(struct drm_crtc *crtc, struct drm_display_mod WREG32(RADEON_DISP2_MERGE_CNTL, disp2_merge_cntl); WREG32(RADEON_CRTC2_GEN_CNTL, crtc2_gen_cntl); + + WREG32(RADEON_FP_H2_SYNC_STRT_WID, crtc_h_sync_strt_wid); + WREG32(RADEON_FP_V2_SYNC_STRT_WID, crtc_v_sync_strt_wid); } else { uint32_t crtc_gen_cntl; uint32_t crtc_ext_cntl; diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c index 3a75b5b..0038212 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c @@ -542,6 +542,14 @@ static void radeon_legacy_tmds_int_mode_set(struct drm_encoder *encoder, fp_gen_cntl &= ~(RADEON_FP_FPON | RADEON_FP_TMDS_EN); + fp_gen_cntl &= ~(RADEON_FP_RMX_HVSYNC_CONTROL_EN | + RADEON_FP_DFP_SYNC_SEL | + RADEON_FP_CRT_SYNC_SEL | + RADEON_FP_CRTC_LOCK_8DOT | + RADEON_FP_USE_SHADOW_EN | + RADEON_FP_CRTC_USE_SHADOW_VEND | + RADEON_FP_CRT_SYNC_ALT); + if (1) /* FIXME rgbBits == 8 */ fp_gen_cntl |= RADEON_FP_PANEL_FORMAT; /* 24 bit format */ else @@ -555,7 +563,7 @@ static void radeon_legacy_tmds_int_mode_set(struct drm_encoder *encoder, else fp_gen_cntl |= R200_FP_SOURCE_SEL_CRTC1; } else - fp_gen_cntl |= RADEON_FP_SEL_CRTC1; + fp_gen_cntl &= ~RADEON_FP_SEL_CRTC2; } else { if (ASIC_IS_R300(rdev) || rdev->family == CHIP_R200) { fp_gen_cntl &= ~R200_FP_SOURCE_SEL_MASK; -- cgit v0.10.2 From 0eb96d6ed38430b72897adde58f5477a6b71757a Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Wed, 14 Oct 2009 12:33:41 -0700 Subject: drm/i915: save/restore BLC histogram control reg across suspend/resume Turns out some machines, like the ThinkPad X40 don't come back if you don't save/restore this register. Signed-off-by: Jesse Barnes Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 24e154e..f6a3587 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -304,6 +304,7 @@ typedef struct drm_i915_private { u32 saveDSPASURF; u32 saveDSPATILEOFF; u32 savePFIT_PGM_RATIOS; + u32 saveBLC_HIST_CTL; u32 saveBLC_PWM_CTL; u32 saveBLC_PWM_CTL2; u32 saveFPB0; diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 0dd87a7..b481358 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -1080,6 +1080,8 @@ #define BACKLIGHT_DUTY_CYCLE_SHIFT (0) #define BACKLIGHT_DUTY_CYCLE_MASK (0xffff) +#define BLC_HIST_CTL 0x61260 + /* TV port control */ #define TV_CTL 0x68000 /** Enables the TV encoder */ diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index 660c5f3..75c5bed 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -410,6 +410,7 @@ void i915_save_display(struct drm_device *dev) dev_priv->savePP_CONTROL = I915_READ(PP_CONTROL); dev_priv->savePFIT_PGM_RATIOS = I915_READ(PFIT_PGM_RATIOS); dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL); + dev_priv->saveBLC_HIST_CTL = I915_READ(BLC_HIST_CTL); if (IS_I965G(dev)) dev_priv->saveBLC_PWM_CTL2 = I915_READ(BLC_PWM_CTL2); if (IS_MOBILE(dev) && !IS_I830(dev)) @@ -501,6 +502,7 @@ void i915_restore_display(struct drm_device *dev) I915_WRITE(PFIT_PGM_RATIOS, dev_priv->savePFIT_PGM_RATIOS); I915_WRITE(BLC_PWM_CTL, dev_priv->saveBLC_PWM_CTL); + I915_WRITE(BLC_HIST_CTL, dev_priv->saveBLC_HIST_CTL); I915_WRITE(PP_ON_DELAYS, dev_priv->savePP_ON_DELAYS); I915_WRITE(PP_OFF_DELAYS, dev_priv->savePP_OFF_DELAYS); I915_WRITE(PP_DIVISOR, dev_priv->savePP_DIVISOR); -- cgit v0.10.2 From 0d9c778978ff268228c095ae737c282c03a5986d Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 14 Oct 2009 20:12:46 +0100 Subject: drm/i915: Install a fence register for fbc on g4x To enable framebuffer compression on a g4x, we not only need the buffer to tiled (X only), we also need to hold a fence register for the buffer. Currently we only install a fence register for pre-i965s when setting up the scanout buffer. Rather than adding some convoluted logic to g4x_enable_fbc() to acquire a fence register, and perhaps to g4x_disable_fbc() to release it again, we can extend the acquisition during setup to all chipsets. Signed-off-by: Chris Wilson Cc: Jesse Barnes Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 8278d9d..123cce1 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -1260,9 +1260,11 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, return ret; } - /* Pre-i965 needs to install a fence for tiled scan-out */ - if (!IS_I965G(dev) && - obj_priv->fence_reg == I915_FENCE_REG_NONE && + /* Install a fence for tiled scan-out. Pre-i965 always needs a fence, + * whereas 965+ only requires a fence if using framebuffer compression. + * For simplicity, we always install a fence as the cost is not that onerous. + */ + if (obj_priv->fence_reg == I915_FENCE_REG_NONE && obj_priv->tiling_mode != I915_TILING_NONE) { ret = i915_gem_object_get_fence_reg(obj); if (ret != 0) { -- cgit v0.10.2 From b94b08081fcecf83fa690d6c5664f6316fe72208 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 14 Oct 2009 15:10:03 -0700 Subject: [IA64] fix percpu warnings Fix percpu types warning in ia64/sn: arch/ia64/sn/kernel/setup.c:74: error: conflicting types for '__pcpu_scope___sn_cnodeid_to_nasid' arch/ia64/include/asm/sn/arch.h:74: error: previous declaration of '__pcpu_scope___sn_cnodeid_to_nasid' was here Signed-off-by: Randy Dunlap Cc: Jes Sorensen Acked-by: Tejun Heo Signed-off-by: Tony Luck diff --git a/arch/ia64/include/asm/sn/arch.h b/arch/ia64/include/asm/sn/arch.h index 7caa1f4..f5f493b 100644 --- a/arch/ia64/include/asm/sn/arch.h +++ b/arch/ia64/include/asm/sn/arch.h @@ -71,7 +71,7 @@ DECLARE_PER_CPU(struct sn_hub_info_s, __sn_hub_info); * Compact node ID to nasid mappings kept in the per-cpu data areas of each * cpu. */ -DECLARE_PER_CPU(short, __sn_cnodeid_to_nasid[MAX_COMPACT_NODES]); +DECLARE_PER_CPU(short [MAX_COMPACT_NODES], __sn_cnodeid_to_nasid); #define sn_cnodeid_to_nasid (&__get_cpu_var(__sn_cnodeid_to_nasid[0])) -- cgit v0.10.2 From 0294cf4f7f895ddcf284b1ce7cf27a2c9d7106f7 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 15 Oct 2009 16:16:35 -0400 Subject: drm/radeon/kms: fix connector edid handling Based partly on a patch from Christian Koenig - fix several memory leaks in radeon_connector->edid handling - store edid in radeon_connector->edid in detect() or get_modes() - switch hdmi detect code to use radeon_connector->edid - add support for oem boards multiple connectors that share a ddc line. - short circuit lvds_detect() if have a stored edid Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index 729207a..5b6067a 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -400,7 +400,6 @@ static enum drm_connector_status radeon_lvds_detect(struct drm_connector *connec struct radeon_connector *radeon_connector = to_radeon_connector(connector); struct drm_encoder *encoder = radeon_best_single_encoder(connector); enum drm_connector_status ret = connector_status_disconnected; - bool dret; if (encoder) { struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); @@ -413,12 +412,17 @@ static enum drm_connector_status radeon_lvds_detect(struct drm_connector *connec } /* check for edid as well */ - if (radeon_connector->ddc_bus) { - radeon_i2c_do_lock(radeon_connector, 1); - dret = radeon_ddc_probe(radeon_connector); - radeon_i2c_do_lock(radeon_connector, 0); - if (dret) - ret = connector_status_connected; + if (radeon_connector->edid) + ret = connector_status_connected; + else { + if (radeon_connector->ddc_bus) { + radeon_i2c_do_lock(radeon_connector, 1); + radeon_connector->edid = drm_get_edid(&radeon_connector->base, + &radeon_connector->ddc_bus->adapter); + radeon_i2c_do_lock(radeon_connector, 0); + if (radeon_connector->edid) + ret = connector_status_connected; + } } /* check acpi lid status ??? */ @@ -432,6 +436,8 @@ static void radeon_connector_destroy(struct drm_connector *connector) if (radeon_connector->ddc_bus) radeon_i2c_destroy(radeon_connector->ddc_bus); + if (radeon_connector->edid) + kfree(radeon_connector->edid); kfree(radeon_connector->con_priv); drm_sysfs_connector_remove(connector); drm_connector_cleanup(connector); @@ -519,9 +525,32 @@ static enum drm_connector_status radeon_vga_detect(struct drm_connector *connect radeon_i2c_do_lock(radeon_connector, 1); dret = radeon_ddc_probe(radeon_connector); radeon_i2c_do_lock(radeon_connector, 0); - if (dret) - ret = connector_status_connected; - else { + if (dret) { + if (radeon_connector->edid) { + kfree(radeon_connector->edid); + radeon_connector->edid = NULL; + } + radeon_i2c_do_lock(radeon_connector, 1); + radeon_connector->edid = drm_get_edid(&radeon_connector->base, &radeon_connector->ddc_bus->adapter); + radeon_i2c_do_lock(radeon_connector, 0); + + if (!radeon_connector->edid) { + DRM_ERROR("DDC responded but not EDID found for %s\n", + drm_get_connector_name(connector)); + } else { + radeon_connector->use_digital = !!(radeon_connector->edid->input & DRM_EDID_INPUT_DIGITAL); + + /* some oems have boards with separate digital and analog connectors + * with a shared ddc line (often vga + hdmi) + */ + if (radeon_connector->use_digital && radeon_connector->shared_ddc) { + kfree(radeon_connector->edid); + radeon_connector->edid = NULL; + ret = connector_status_disconnected; + } else + ret = connector_status_connected; + } + } else { if (radeon_connector->dac_load_detect) { encoder_funcs = encoder->helper_private; ret = encoder_funcs->detect(encoder, connector); @@ -649,6 +678,10 @@ static enum drm_connector_status radeon_dvi_detect(struct drm_connector *connect dret = radeon_ddc_probe(radeon_connector); radeon_i2c_do_lock(radeon_connector, 0); if (dret) { + if (radeon_connector->edid) { + kfree(radeon_connector->edid); + radeon_connector->edid = NULL; + } radeon_i2c_do_lock(radeon_connector, 1); radeon_connector->edid = drm_get_edid(&radeon_connector->base, &radeon_connector->ddc_bus->adapter); radeon_i2c_do_lock(radeon_connector, 0); @@ -659,10 +692,15 @@ static enum drm_connector_status radeon_dvi_detect(struct drm_connector *connect } else { radeon_connector->use_digital = !!(radeon_connector->edid->input & DRM_EDID_INPUT_DIGITAL); - /* if this isn't a digital monitor - then we need to make sure we don't have any - TV conflicts */ - ret = connector_status_connected; + /* some oems have boards with separate digital and analog connectors + * with a shared ddc line (often vga + hdmi) + */ + if ((!radeon_connector->use_digital) && radeon_connector->shared_ddc) { + kfree(radeon_connector->edid); + radeon_connector->edid = NULL; + ret = connector_status_disconnected; + } else + ret = connector_status_connected; } } @@ -787,6 +825,7 @@ radeon_add_atom_connector(struct drm_device *dev, struct radeon_connector *radeon_connector; struct radeon_connector_atom_dig *radeon_dig_connector; uint32_t subpixel_order = SubPixelNone; + bool shared_ddc = false; int ret; /* fixme - tv/cv/din */ @@ -800,6 +839,13 @@ radeon_add_atom_connector(struct drm_device *dev, radeon_connector->devices |= supported_device; return; } + if (radeon_connector->ddc_bus && i2c_bus->valid) { + if (memcmp(&radeon_connector->ddc_bus->rec, i2c_bus, + sizeof(struct radeon_i2c_bus_rec)) == 0) { + radeon_connector->shared_ddc = true; + shared_ddc = true; + } + } } radeon_connector = kzalloc(sizeof(struct radeon_connector), GFP_KERNEL); @@ -810,6 +856,7 @@ radeon_add_atom_connector(struct drm_device *dev, radeon_connector->connector_id = connector_id; radeon_connector->devices = supported_device; + radeon_connector->shared_ddc = shared_ddc; switch (connector_type) { case DRM_MODE_CONNECTOR_VGA: drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type); diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index a20bf43..c85df4a 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -334,27 +334,19 @@ static bool radeon_setup_enc_conn(struct drm_device *dev) int radeon_ddc_get_modes(struct radeon_connector *radeon_connector) { - struct edid *edid; int ret = 0; if (!radeon_connector->ddc_bus) return -1; if (!radeon_connector->edid) { radeon_i2c_do_lock(radeon_connector, 1); - edid = drm_get_edid(&radeon_connector->base, &radeon_connector->ddc_bus->adapter); + radeon_connector->edid = drm_get_edid(&radeon_connector->base, &radeon_connector->ddc_bus->adapter); radeon_i2c_do_lock(radeon_connector, 0); - } else - edid = radeon_connector->edid; + } - if (edid) { - /* update digital bits here */ - if (edid->input & DRM_EDID_INPUT_DIGITAL) - radeon_connector->use_digital = 1; - else - radeon_connector->use_digital = 0; - drm_mode_connector_update_edid_property(&radeon_connector->base, edid); - ret = drm_add_edid_modes(&radeon_connector->base, edid); - kfree(edid); + if (radeon_connector->edid) { + drm_mode_connector_update_edid_property(&radeon_connector->base, radeon_connector->edid); + ret = drm_add_edid_modes(&radeon_connector->base, radeon_connector->edid); return ret; } drm_mode_connector_update_edid_property(&radeon_connector->base, NULL); diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index 6cdef27..b70440e 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -449,7 +449,7 @@ atombios_digital_setup(struct drm_encoder *encoder, int action) case 1: args.v1.ucMisc = 0; args.v1.ucAction = action; - if (drm_detect_hdmi_monitor((struct edid *)connector->edid_blob_ptr)) + if (drm_detect_hdmi_monitor(radeon_connector->edid)) args.v1.ucMisc |= PANEL_ENCODER_MISC_HDMI_TYPE; args.v1.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10); if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) { @@ -474,7 +474,7 @@ atombios_digital_setup(struct drm_encoder *encoder, int action) if (dig->coherent_mode) args.v2.ucMisc |= PANEL_ENCODER_MISC_COHERENT; } - if (drm_detect_hdmi_monitor((struct edid *)connector->edid_blob_ptr)) + if (drm_detect_hdmi_monitor(radeon_connector->edid)) args.v2.ucMisc |= PANEL_ENCODER_MISC_HDMI_TYPE; args.v2.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10); args.v2.ucTruncate = 0; @@ -532,7 +532,7 @@ atombios_get_encoder_mode(struct drm_encoder *encoder) switch (connector->connector_type) { case DRM_MODE_CONNECTOR_DVII: case DRM_MODE_CONNECTOR_HDMIB: /* HDMI-B is basically DL-DVI; analog works fine */ - if (drm_detect_hdmi_monitor((struct edid *)connector->edid_blob_ptr)) + if (drm_detect_hdmi_monitor(radeon_connector->edid)) return ATOM_ENCODER_MODE_HDMI; else if (radeon_connector->use_digital) return ATOM_ENCODER_MODE_DVI; @@ -542,7 +542,7 @@ atombios_get_encoder_mode(struct drm_encoder *encoder) case DRM_MODE_CONNECTOR_DVID: case DRM_MODE_CONNECTOR_HDMIA: default: - if (drm_detect_hdmi_monitor((struct edid *)connector->edid_blob_ptr)) + if (drm_detect_hdmi_monitor(radeon_connector->edid)) return ATOM_ENCODER_MODE_HDMI; else return ATOM_ENCODER_MODE_DVI; @@ -554,7 +554,7 @@ atombios_get_encoder_mode(struct drm_encoder *encoder) /*if (radeon_output->MonType == MT_DP) return ATOM_ENCODER_MODE_DP; else*/ - if (drm_detect_hdmi_monitor((struct edid *)connector->edid_blob_ptr)) + if (drm_detect_hdmi_monitor(radeon_connector->edid)) return ATOM_ENCODER_MODE_HDMI; else return ATOM_ENCODER_MODE_DVI; diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h index 3d2631b..b6868fb 100644 --- a/drivers/gpu/drm/radeon/radeon_mode.h +++ b/drivers/gpu/drm/radeon/radeon_mode.h @@ -297,6 +297,8 @@ struct radeon_connector { uint32_t connector_id; uint32_t devices; struct radeon_i2c_chan *ddc_bus; + /* some systems have a an hdmi and vga port with a shared ddc line */ + bool shared_ddc; bool use_digital; /* we need to mind the EDID between detect and get modes due to analog/digital/tvencoder */ -- cgit v0.10.2 From ceefedd8e8a80b743fa0b6d6b1992be7029a9efb Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 13 Oct 2009 23:57:47 -0400 Subject: drm/radeon/kms/atom: fix tv-out D1MODE_INTERLEAVE_EN was getting set in some cases in the encoder quirks function due to the changes in 5a9bcacc0a56f0d9577494e834519480018a6cc3 Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 3409aa3..f7dcb69 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -31,10 +31,6 @@ #include "atom.h" #include "atom-bits.h" -/* evil but including atombios.h is much worse */ -bool radeon_atom_get_tv_timings(struct radeon_device *rdev, int index, - SET_CRTC_TIMING_PARAMETERS_PS_ALLOCATION *crtc_timing, - int32_t *pixel_clock); static void atombios_overscan_setup(struct drm_crtc *crtc, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index b70440e..2aa5994 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -206,7 +206,7 @@ static bool radeon_atom_mode_fixup(struct drm_encoder *encoder, && (mode->crtc_vsync_start < (mode->crtc_vdisplay + 2))) adjusted_mode->crtc_vsync_start = adjusted_mode->crtc_vdisplay + 2; - if (radeon_encoder->active_device & ATOM_DEVICE_TV_SUPPORT) { + if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT)) { struct radeon_encoder_atom_dac *tv_dac = radeon_encoder->enc_priv; if (tv_dac) { if (tv_dac->tv_std == TV_STD_NTSC || @@ -1085,8 +1085,11 @@ atombios_apply_encoder_quirks(struct drm_encoder *encoder, } /* set scaler clears this on some chips */ - if (ASIC_IS_AVIVO(rdev) && (mode->flags & DRM_MODE_FLAG_INTERLACE)) - WREG32(AVIVO_D1MODE_DATA_FORMAT + radeon_crtc->crtc_offset, AVIVO_D1MODE_INTERLEAVE_EN); + if (!(radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT))) { + if (ASIC_IS_AVIVO(rdev) && (mode->flags & DRM_MODE_FLAG_INTERLACE)) + WREG32(AVIVO_D1MODE_DATA_FORMAT + radeon_crtc->crtc_offset, + AVIVO_D1MODE_INTERLEAVE_EN); + } } static void -- cgit v0.10.2 From dfdd646773941bb6b22c3898a26a109e57c872a2 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 13 Oct 2009 12:48:44 -0400 Subject: drm/radeon/kms: limit default tv modes to <= 1024x768 fixes fdo bug 24496 Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index 5b6067a..ce3a785 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -223,6 +223,11 @@ static void radeon_add_common_modes(struct drm_encoder *encoder, struct drm_conn }; for (i = 0; i < 17; i++) { + if (radeon_encoder->devices & (ATOM_DEVICE_TV_SUPPORT)) { + if (common_modes[i].w > 1024 || + common_modes[i].h > 768) + continue; + } if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) { if (common_modes[i].w > native_mode->hdisplay || common_modes[i].h > native_mode->vdisplay || -- cgit v0.10.2 From a77f171843d466d4af0d527bcb2d314fafa8afd7 Mon Sep 17 00:00:00 2001 From: Matt Turner Date: Wed, 14 Oct 2009 00:34:41 -0400 Subject: drm/radeon/kms: use RADEON_GPU_PAGE_SIZE instead of 4096 Signed-off-by: Matt Turner Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index 33198dd..c22adff 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -240,7 +240,7 @@ int r100_wb_init(struct radeon_device *rdev) int r; if (rdev->wb.wb_obj == NULL) { - r = radeon_object_create(rdev, NULL, 4096, + r = radeon_object_create(rdev, NULL, RADEON_GPU_PAGE_SIZE, true, RADEON_GEM_DOMAIN_GTT, false, &rdev->wb.wb_obj); diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c index e08c4a8..2f43ee8 100644 --- a/drivers/gpu/drm/radeon/r300.c +++ b/drivers/gpu/drm/radeon/r300.c @@ -113,7 +113,7 @@ int rv370_pcie_gart_enable(struct radeon_device *rdev) tmp = RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_DISCARD; WREG32_PCIE(RADEON_PCIE_TX_GART_CNTL, tmp); WREG32_PCIE(RADEON_PCIE_TX_GART_START_LO, rdev->mc.gtt_location); - tmp = rdev->mc.gtt_location + rdev->mc.gtt_size - 4096; + tmp = rdev->mc.gtt_location + rdev->mc.gtt_size - RADEON_GPU_PAGE_SIZE; WREG32_PCIE(RADEON_PCIE_TX_GART_END_LO, tmp); WREG32_PCIE(RADEON_PCIE_TX_GART_START_HI, 0); WREG32_PCIE(RADEON_PCIE_TX_GART_END_HI, 0); diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 6b43a95..1b5aa1f 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -1269,9 +1269,9 @@ int r600_cp_resume(struct radeon_device *rdev) rb_bufsz = drm_order(rdev->cp.ring_size / 8); #ifdef __BIG_ENDIAN WREG32(CP_RB_CNTL, BUF_SWAP_32BIT | RB_NO_UPDATE | - (drm_order(4096/8) << 8) | rb_bufsz); + (drm_order(RADEON_GPU_PAGE_SIZE/8) << 8) | rb_bufsz); #else - WREG32(CP_RB_CNTL, RB_NO_UPDATE | (drm_order(4096/8) << 8) | rb_bufsz); + WREG32(CP_RB_CNTL, RB_NO_UPDATE | (drm_order(RADEON_GPU_PAGE_SIZE/8) << 8) | rb_bufsz); #endif WREG32(CP_SEM_WAIT_TIMER, 0x4); @@ -1400,7 +1400,7 @@ int r600_wb_enable(struct radeon_device *rdev) int r; if (rdev->wb.wb_obj == NULL) { - r = radeon_object_create(rdev, NULL, 4096, true, + r = radeon_object_create(rdev, NULL, RADEON_GPU_PAGE_SIZE, true, RADEON_GEM_DOMAIN_GTT, false, &rdev->wb.wb_obj); if (r) { dev_warn(rdev->dev, "failed to create WB buffer (%d).\n", r); @@ -1450,8 +1450,8 @@ int r600_copy_blit(struct radeon_device *rdev, uint64_t src_offset, uint64_t dst_offset, unsigned num_pages, struct radeon_fence *fence) { - r600_blit_prepare_copy(rdev, num_pages * 4096); - r600_kms_blit_copy(rdev, src_offset, dst_offset, num_pages * 4096); + r600_blit_prepare_copy(rdev, num_pages * RADEON_GPU_PAGE_SIZE); + r600_kms_blit_copy(rdev, src_offset, dst_offset, num_pages * RADEON_GPU_PAGE_SIZE); r600_blit_done_copy(rdev, fence); return 0; } diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 3598adc..8b60e36 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -276,6 +276,8 @@ union radeon_gart_table { struct radeon_gart_table_vram vram; }; +#define RADEON_GPU_PAGE_SIZE 4096 + struct radeon_gart { dma_addr_t table_addr; unsigned num_gpu_pages; diff --git a/drivers/gpu/drm/radeon/radeon_benchmark.c b/drivers/gpu/drm/radeon/radeon_benchmark.c index 2e938f7..10bd50a 100644 --- a/drivers/gpu/drm/radeon/radeon_benchmark.c +++ b/drivers/gpu/drm/radeon/radeon_benchmark.c @@ -63,7 +63,7 @@ void radeon_benchmark_move(struct radeon_device *rdev, unsigned bsize, if (r) { goto out_cleanup; } - r = radeon_copy_dma(rdev, saddr, daddr, size / 4096, fence); + r = radeon_copy_dma(rdev, saddr, daddr, size / RADEON_GPU_PAGE_SIZE, fence); if (r) { goto out_cleanup; } @@ -88,7 +88,7 @@ void radeon_benchmark_move(struct radeon_device *rdev, unsigned bsize, if (r) { goto out_cleanup; } - r = radeon_copy_blit(rdev, saddr, daddr, size / 4096, fence); + r = radeon_copy_blit(rdev, saddr, daddr, size / RADEON_GPU_PAGE_SIZE, fence); if (r) { goto out_cleanup; } diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c index a931af0..a68d756 100644 --- a/drivers/gpu/drm/radeon/radeon_gart.c +++ b/drivers/gpu/drm/radeon/radeon_gart.c @@ -140,15 +140,15 @@ void radeon_gart_unbind(struct radeon_device *rdev, unsigned offset, WARN(1, "trying to unbind memory to unitialized GART !\n"); return; } - t = offset / 4096; - p = t / (PAGE_SIZE / 4096); + t = offset / RADEON_GPU_PAGE_SIZE; + p = t / (PAGE_SIZE / RADEON_GPU_PAGE_SIZE); for (i = 0; i < pages; i++, p++) { if (rdev->gart.pages[p]) { pci_unmap_page(rdev->pdev, rdev->gart.pages_addr[p], PAGE_SIZE, PCI_DMA_BIDIRECTIONAL); rdev->gart.pages[p] = NULL; rdev->gart.pages_addr[p] = 0; - for (j = 0; j < (PAGE_SIZE / 4096); j++, t++) { + for (j = 0; j < (PAGE_SIZE / RADEON_GPU_PAGE_SIZE); j++, t++) { radeon_gart_set_page(rdev, t, 0); } } @@ -169,8 +169,8 @@ int radeon_gart_bind(struct radeon_device *rdev, unsigned offset, DRM_ERROR("trying to bind memory to unitialized GART !\n"); return -EINVAL; } - t = offset / 4096; - p = t / (PAGE_SIZE / 4096); + t = offset / RADEON_GPU_PAGE_SIZE; + p = t / (PAGE_SIZE / RADEON_GPU_PAGE_SIZE); for (i = 0; i < pages; i++, p++) { /* we need to support large memory configurations */ @@ -185,9 +185,9 @@ int radeon_gart_bind(struct radeon_device *rdev, unsigned offset, } rdev->gart.pages[p] = pagelist[i]; page_base = rdev->gart.pages_addr[p]; - for (j = 0; j < (PAGE_SIZE / 4096); j++, t++) { + for (j = 0; j < (PAGE_SIZE / RADEON_GPU_PAGE_SIZE); j++, t++) { radeon_gart_set_page(rdev, t, page_base); - page_base += 4096; + page_base += RADEON_GPU_PAGE_SIZE; } } mb(); @@ -200,14 +200,14 @@ int radeon_gart_init(struct radeon_device *rdev) if (rdev->gart.pages) { return 0; } - /* We need PAGE_SIZE >= 4096 */ - if (PAGE_SIZE < 4096) { + /* We need PAGE_SIZE >= RADEON_GPU_PAGE_SIZE */ + if (PAGE_SIZE < RADEON_GPU_PAGE_SIZE) { DRM_ERROR("Page size is smaller than GPU page size!\n"); return -EINVAL; } /* Compute table size */ rdev->gart.num_cpu_pages = rdev->mc.gtt_size / PAGE_SIZE; - rdev->gart.num_gpu_pages = rdev->mc.gtt_size / 4096; + rdev->gart.num_gpu_pages = rdev->mc.gtt_size / RADEON_GPU_PAGE_SIZE; DRM_INFO("GART: num cpu pages %u, num gpu pages %u\n", rdev->gart.num_cpu_pages, rdev->gart.num_gpu_pages); /* Allocate pages table */ diff --git a/drivers/gpu/drm/radeon/radeon_test.c b/drivers/gpu/drm/radeon/radeon_test.c index 03c33cf..f8a465d 100644 --- a/drivers/gpu/drm/radeon/radeon_test.c +++ b/drivers/gpu/drm/radeon/radeon_test.c @@ -42,7 +42,7 @@ void radeon_test_moves(struct radeon_device *rdev) /* Number of tests = * (Total GTT - IB pool - writeback page - ring buffer) / test size */ - n = (rdev->mc.gtt_size - RADEON_IB_POOL_SIZE*64*1024 - 4096 - + n = (rdev->mc.gtt_size - RADEON_IB_POOL_SIZE*64*1024 - RADEON_GPU_PAGE_SIZE - rdev->cp.ring_size) / size; gtt_obj = kzalloc(n * sizeof(*gtt_obj), GFP_KERNEL); @@ -102,7 +102,7 @@ void radeon_test_moves(struct radeon_device *rdev) goto out_cleanup; } - r = radeon_copy(rdev, gtt_addr, vram_addr, size / 4096, fence); + r = radeon_copy(rdev, gtt_addr, vram_addr, size / RADEON_GPU_PAGE_SIZE, fence); if (r) { DRM_ERROR("Failed GTT->VRAM copy %d\n", i); goto out_cleanup; @@ -145,7 +145,7 @@ void radeon_test_moves(struct radeon_device *rdev) goto out_cleanup; } - r = radeon_copy(rdev, vram_addr, gtt_addr, size / 4096, fence); + r = radeon_copy(rdev, vram_addr, gtt_addr, size / RADEON_GPU_PAGE_SIZE, fence); if (r) { DRM_ERROR("Failed VRAM->GTT copy %d\n", i); goto out_cleanup; -- cgit v0.10.2 From f059d2ad69b056aeabad4460f706a3df2f77ce50 Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Wed, 14 Oct 2009 09:11:25 +0800 Subject: drm: Add the basic check for the detailed timing in EDID Sometimes we will get the incorrect display modeline when parsing the detailed timing in EDID. For example: >hsync/vsync width is zero >sync is beyond the blank. So add the basic check for the detailed timing in EDID to avoid the incorrect display modeline. Signed-off-by: Zhao Yakui Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index 3c0d2b3..cea665d 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -626,6 +626,12 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev, return NULL; } + /* it is incorrect if hsync/vsync width is zero */ + if (!hsync_pulse_width || !vsync_pulse_width) { + DRM_DEBUG_KMS("Incorrect Detailed timing. " + "Wrong Hsync/Vsync pulse width\n"); + return NULL; + } mode = drm_mode_create(dev); if (!mode) return NULL; @@ -647,6 +653,15 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev, mode->vsync_end = mode->vsync_start + vsync_pulse_width; mode->vtotal = mode->vdisplay + vblank; + /* perform the basic check for the detailed timing */ + if (mode->hsync_end > mode->htotal || + mode->vsync_end > mode->vtotal) { + drm_mode_destroy(dev, mode); + DRM_DEBUG_KMS("Incorrect detailed timing. " + "Sync is beyond the blank.\n"); + return NULL; + } + drm_mode_set_name(mode); if (pt->misc & DRM_EDID_PT_INTERLACED) -- cgit v0.10.2 From 1442577bf6da1a31ae6555212202be9a2cec5642 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 16 Oct 2009 15:55:25 +1100 Subject: Revert "md: do not progress the resync process if the stripe was blocked" This reverts commit df10cfbc4d7ab93260d997df754219d390d62a9d. This patch was based on a misunderstanding and risks introducing a busy-wait loop. So revert it. Acked-by: Dan Williams Signed-off-by: NeilBrown diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 9482980..ec14ff5 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -2896,7 +2896,7 @@ static void handle_stripe_expansion(raid5_conf_t *conf, struct stripe_head *sh, * */ -static bool handle_stripe5(struct stripe_head *sh) +static void handle_stripe5(struct stripe_head *sh) { raid5_conf_t *conf = sh->raid_conf; int disks = sh->disks, i; @@ -3167,11 +3167,9 @@ static bool handle_stripe5(struct stripe_head *sh) ops_run_io(sh, &s); return_io(return_bi); - - return blocked_rdev == NULL; } -static bool handle_stripe6(struct stripe_head *sh) +static void handle_stripe6(struct stripe_head *sh) { raid5_conf_t *conf = sh->raid_conf; int disks = sh->disks; @@ -3455,17 +3453,14 @@ static bool handle_stripe6(struct stripe_head *sh) ops_run_io(sh, &s); return_io(return_bi); - - return blocked_rdev == NULL; } -/* returns true if the stripe was handled */ -static bool handle_stripe(struct stripe_head *sh) +static void handle_stripe(struct stripe_head *sh) { if (sh->raid_conf->level == 6) - return handle_stripe6(sh); + handle_stripe6(sh); else - return handle_stripe5(sh); + handle_stripe5(sh); } static void raid5_activate_delayed(raid5_conf_t *conf) @@ -4277,9 +4272,7 @@ static inline sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *ski clear_bit(STRIPE_INSYNC, &sh->state); spin_unlock(&sh->lock); - /* wait for any blocked device to be handled */ - while (unlikely(!handle_stripe(sh))) - ; + handle_stripe(sh); release_stripe(sh); return STRIPE_SECTORS; -- cgit v0.10.2 From 1d9d52416c0445019ccc1f0fddb9a227456eb61b Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 16 Oct 2009 15:55:32 +1100 Subject: md/raid1/raid10: add a cond_resched During 'check' of a raid1 or raid10 it is possible for the management thread to spend a lot of time running 'memcmp' on blocks from different devices, so make sure the thread has a chance to schedule. raid5d already has a cond_resched (in process_stripe). Reported-By: Lee Howard Signed-off-by: NeilBrown diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index d1b9bd5..71a01a2 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -1683,6 +1683,7 @@ static void raid1d(mddev_t *mddev) generic_make_request(bio); } } + cond_resched(); } if (unplug) unplug_slaves(mddev); diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 51c4c5c..69fc76c 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -1632,6 +1632,7 @@ static void raid10d(mddev_t *mddev) generic_make_request(bio); } } + cond_resched(); } if (unplug) unplug_slaves(mddev); -- cgit v0.10.2 From f5efd45ae597c96ed017afad5662b67d55b402a0 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 16 Oct 2009 15:55:38 +1100 Subject: md/raid5: initialize conf->device_lock earlier Deallocating a raid5_conf_t structure requires taking 'device_lock'. Ensure it is initialized before it is used, i.e. initialize the lock before attempting any further initializations that might fail. Signed-off-by: Dan Williams Signed-off-by: NeilBrown diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index ec14ff5..c3e5967 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -4715,6 +4715,18 @@ static raid5_conf_t *setup_conf(mddev_t *mddev) conf = kzalloc(sizeof(raid5_conf_t), GFP_KERNEL); if (conf == NULL) goto abort; + spin_lock_init(&conf->device_lock); + init_waitqueue_head(&conf->wait_for_stripe); + init_waitqueue_head(&conf->wait_for_overlap); + INIT_LIST_HEAD(&conf->handle_list); + INIT_LIST_HEAD(&conf->hold_list); + INIT_LIST_HEAD(&conf->delayed_list); + INIT_LIST_HEAD(&conf->bitmap_list); + INIT_LIST_HEAD(&conf->inactive_list); + atomic_set(&conf->active_stripes, 0); + atomic_set(&conf->preread_active_stripes, 0); + atomic_set(&conf->active_aligned_reads, 0); + conf->bypass_threshold = BYPASS_THRESHOLD; conf->raid_disks = mddev->raid_disks; conf->scribble_len = scribble_len(conf->raid_disks); @@ -4737,19 +4749,6 @@ static raid5_conf_t *setup_conf(mddev_t *mddev) if (raid5_alloc_percpu(conf) != 0) goto abort; - spin_lock_init(&conf->device_lock); - init_waitqueue_head(&conf->wait_for_stripe); - init_waitqueue_head(&conf->wait_for_overlap); - INIT_LIST_HEAD(&conf->handle_list); - INIT_LIST_HEAD(&conf->hold_list); - INIT_LIST_HEAD(&conf->delayed_list); - INIT_LIST_HEAD(&conf->bitmap_list); - INIT_LIST_HEAD(&conf->inactive_list); - atomic_set(&conf->active_stripes, 0); - atomic_set(&conf->preread_active_stripes, 0); - atomic_set(&conf->active_aligned_reads, 0); - conf->bypass_threshold = BYPASS_THRESHOLD; - pr_debug("raid5: run(%s) called.\n", mdname(mddev)); list_for_each_entry(rdev, &mddev->disks, same_set) { -- cgit v0.10.2 From ed9bfdf1a40952fd0f8094ec77f876b84ead69af Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 16 Oct 2009 15:55:44 +1100 Subject: md: raid1/raid10: handle allocation errors during array setup. Both raid1 and raid10 create a mempool during startup. If the 'alloc' function for this mempool fails, unplug_slaves is called. If that happens when the pool is being initialised, unplug_slaves will try to use the 'conf' structure that isn't filled in yet, and badness will happen. So ensure that unplug_slaves doesn't get called unless we know that the conf structure if fully initialised. Signed-off-by: NeilBrown diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 71a01a2..a053423 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -64,7 +64,7 @@ static void * r1bio_pool_alloc(gfp_t gfp_flags, void *data) /* allocate a r1bio with room for raid_disks entries in the bios array */ r1_bio = kzalloc(size, gfp_flags); - if (!r1_bio) + if (!r1_bio && pi->mddev) unplug_slaves(pi->mddev); return r1_bio; @@ -1979,13 +1979,14 @@ static int run(mddev_t *mddev) conf->poolinfo = kmalloc(sizeof(*conf->poolinfo), GFP_KERNEL); if (!conf->poolinfo) goto out_no_mem; - conf->poolinfo->mddev = mddev; + conf->poolinfo->mddev = NULL; conf->poolinfo->raid_disks = mddev->raid_disks; conf->r1bio_pool = mempool_create(NR_RAID1_BIOS, r1bio_pool_alloc, r1bio_pool_free, conf->poolinfo); if (!conf->r1bio_pool) goto out_no_mem; + conf->poolinfo->mddev = mddev; spin_lock_init(&conf->device_lock); mddev->queue->queue_lock = &conf->device_lock; diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 69fc76c..c2cb7b8 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -68,7 +68,7 @@ static void * r10bio_pool_alloc(gfp_t gfp_flags, void *data) /* allocate a r10bio with room for raid_disks entries in the bios array */ r10_bio = kzalloc(size, gfp_flags); - if (!r10_bio) + if (!r10_bio && conf->mddev) unplug_slaves(conf->mddev); return r10_bio; @@ -2096,7 +2096,6 @@ static int run(mddev_t *mddev) if (!conf->tmppage) goto out_free_conf; - conf->mddev = mddev; conf->raid_disks = mddev->raid_disks; conf->near_copies = nc; conf->far_copies = fc; @@ -2133,6 +2132,7 @@ static int run(mddev_t *mddev) goto out_free_conf; } + conf->mddev = mddev; spin_lock_init(&conf->device_lock); mddev->queue->queue_lock = &conf->device_lock; -- cgit v0.10.2 From ae8fa2831bbc5092ee9d1b90e623af881cf27140 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 16 Oct 2009 15:56:01 +1100 Subject: md: remove clumsy usage of do_sync_mapping_range from bitmap code and replace with vfs_fsync which is much neater (but wasn't exported, or even in existence at the time the code was written). Cc: Christoph Hellwig Signed-off-by: NeilBrown diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index 6986b00..60e2b32 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -1624,10 +1624,11 @@ int bitmap_create(mddev_t *mddev) bitmap->offset = mddev->bitmap_offset; if (file) { get_file(file); - do_sync_mapping_range(file->f_mapping, 0, LLONG_MAX, - SYNC_FILE_RANGE_WAIT_BEFORE | - SYNC_FILE_RANGE_WRITE | - SYNC_FILE_RANGE_WAIT_AFTER); + /* As future accesses to this file will use bmap, + * and bypass the page cache, we must sync the file + * first. + */ + vfs_fsync(file, file->f_dentry, 1); } /* read superblock from bitmap file (this sets bitmap->chunksize) */ err = bitmap_read_sb(bitmap); -- cgit v0.10.2 From dce3a7a42d585b74ce68081010b42afe81c8f4c4 Mon Sep 17 00:00:00 2001 From: Vladimir Dronnikov Date: Fri, 16 Oct 2009 16:25:19 +1100 Subject: md: drivers/md/unroll.pl replaced with awk analog drivers/md/unroll.pl replaced by awk script to drop build-time dependency on perl Signed-off-by: Vladimir Dronnikov Signed-off-by: NeilBrown diff --git a/drivers/md/Makefile b/drivers/md/Makefile index 1dc4185..e355e7f 100644 --- a/drivers/md/Makefile +++ b/drivers/md/Makefile @@ -46,7 +46,7 @@ obj-$(CONFIG_DM_LOG_USERSPACE) += dm-log-userspace.o obj-$(CONFIG_DM_ZERO) += dm-zero.o quiet_cmd_unroll = UNROLL $@ - cmd_unroll = $(PERL) $(srctree)/$(src)/unroll.pl $(UNROLL) \ + cmd_unroll = $(AWK) -f$(srctree)/$(src)/unroll.awk -vN=$(UNROLL) \ < $< > $@ || ( rm -f $@ && exit 1 ) ifeq ($(CONFIG_ALTIVEC),y) @@ -59,56 +59,56 @@ endif targets += raid6int1.c $(obj)/raid6int1.c: UNROLL := 1 -$(obj)/raid6int1.c: $(src)/raid6int.uc $(src)/unroll.pl FORCE +$(obj)/raid6int1.c: $(src)/raid6int.uc $(src)/unroll.awk FORCE $(call if_changed,unroll) targets += raid6int2.c $(obj)/raid6int2.c: UNROLL := 2 -$(obj)/raid6int2.c: $(src)/raid6int.uc $(src)/unroll.pl FORCE +$(obj)/raid6int2.c: $(src)/raid6int.uc $(src)/unroll.awk FORCE $(call if_changed,unroll) targets += raid6int4.c $(obj)/raid6int4.c: UNROLL := 4 -$(obj)/raid6int4.c: $(src)/raid6int.uc $(src)/unroll.pl FORCE +$(obj)/raid6int4.c: $(src)/raid6int.uc $(src)/unroll.awk FORCE $(call if_changed,unroll) targets += raid6int8.c $(obj)/raid6int8.c: UNROLL := 8 -$(obj)/raid6int8.c: $(src)/raid6int.uc $(src)/unroll.pl FORCE +$(obj)/raid6int8.c: $(src)/raid6int.uc $(src)/unroll.awk FORCE $(call if_changed,unroll) targets += raid6int16.c $(obj)/raid6int16.c: UNROLL := 16 -$(obj)/raid6int16.c: $(src)/raid6int.uc $(src)/unroll.pl FORCE +$(obj)/raid6int16.c: $(src)/raid6int.uc $(src)/unroll.awk FORCE $(call if_changed,unroll) targets += raid6int32.c $(obj)/raid6int32.c: UNROLL := 32 -$(obj)/raid6int32.c: $(src)/raid6int.uc $(src)/unroll.pl FORCE +$(obj)/raid6int32.c: $(src)/raid6int.uc $(src)/unroll.awk FORCE $(call if_changed,unroll) CFLAGS_raid6altivec1.o += $(altivec_flags) targets += raid6altivec1.c $(obj)/raid6altivec1.c: UNROLL := 1 -$(obj)/raid6altivec1.c: $(src)/raid6altivec.uc $(src)/unroll.pl FORCE +$(obj)/raid6altivec1.c: $(src)/raid6altivec.uc $(src)/unroll.awk FORCE $(call if_changed,unroll) CFLAGS_raid6altivec2.o += $(altivec_flags) targets += raid6altivec2.c $(obj)/raid6altivec2.c: UNROLL := 2 -$(obj)/raid6altivec2.c: $(src)/raid6altivec.uc $(src)/unroll.pl FORCE +$(obj)/raid6altivec2.c: $(src)/raid6altivec.uc $(src)/unroll.awk FORCE $(call if_changed,unroll) CFLAGS_raid6altivec4.o += $(altivec_flags) targets += raid6altivec4.c $(obj)/raid6altivec4.c: UNROLL := 4 -$(obj)/raid6altivec4.c: $(src)/raid6altivec.uc $(src)/unroll.pl FORCE +$(obj)/raid6altivec4.c: $(src)/raid6altivec.uc $(src)/unroll.awk FORCE $(call if_changed,unroll) CFLAGS_raid6altivec8.o += $(altivec_flags) targets += raid6altivec8.c $(obj)/raid6altivec8.c: UNROLL := 8 -$(obj)/raid6altivec8.c: $(src)/raid6altivec.uc $(src)/unroll.pl FORCE +$(obj)/raid6altivec8.c: $(src)/raid6altivec.uc $(src)/unroll.awk FORCE $(call if_changed,unroll) quiet_cmd_mktable = TABLE $@ diff --git a/drivers/md/raid6altivec.uc b/drivers/md/raid6altivec.uc index 699dfee..2654d5c 100644 --- a/drivers/md/raid6altivec.uc +++ b/drivers/md/raid6altivec.uc @@ -15,7 +15,7 @@ * * $#-way unrolled portable integer math RAID-6 instruction set * - * This file is postprocessed using unroll.pl + * This file is postprocessed using unroll.awk * * hpa: in process, * you can just "steal" the vec unit with enable_kernel_altivec() (but diff --git a/drivers/md/raid6int.uc b/drivers/md/raid6int.uc index f9bf9cb..d1e276a 100644 --- a/drivers/md/raid6int.uc +++ b/drivers/md/raid6int.uc @@ -15,7 +15,7 @@ * * $#-way unrolled portable integer math RAID-6 instruction set * - * This file is postprocessed using unroll.pl + * This file is postprocessed using unroll.awk */ #include diff --git a/drivers/md/raid6test/Makefile b/drivers/md/raid6test/Makefile index 58ffdf4..2874cbe 100644 --- a/drivers/md/raid6test/Makefile +++ b/drivers/md/raid6test/Makefile @@ -7,7 +7,7 @@ CC = gcc OPTFLAGS = -O2 # Adjust as desired CFLAGS = -I.. -I ../../../include -g $(OPTFLAGS) LD = ld -PERL = perl +AWK = awk AR = ar RANLIB = ranlib @@ -35,35 +35,35 @@ raid6.a: raid6int1.o raid6int2.o raid6int4.o raid6int8.o raid6int16.o \ raid6test: test.c raid6.a $(CC) $(CFLAGS) -o raid6test $^ -raid6altivec1.c: raid6altivec.uc ../unroll.pl - $(PERL) ../unroll.pl 1 < raid6altivec.uc > $@ +raid6altivec1.c: raid6altivec.uc ../unroll.awk + $(AWK) ../unroll.awk -vN=1 < raid6altivec.uc > $@ -raid6altivec2.c: raid6altivec.uc ../unroll.pl - $(PERL) ../unroll.pl 2 < raid6altivec.uc > $@ +raid6altivec2.c: raid6altivec.uc ../unroll.awk + $(AWK) ../unroll.awk -vN=2 < raid6altivec.uc > $@ -raid6altivec4.c: raid6altivec.uc ../unroll.pl - $(PERL) ../unroll.pl 4 < raid6altivec.uc > $@ +raid6altivec4.c: raid6altivec.uc ../unroll.awk + $(AWK) ../unroll.awk -vN=4 < raid6altivec.uc > $@ -raid6altivec8.c: raid6altivec.uc ../unroll.pl - $(PERL) ../unroll.pl 8 < raid6altivec.uc > $@ +raid6altivec8.c: raid6altivec.uc ../unroll.awk + $(AWK) ../unroll.awk -vN=8 < raid6altivec.uc > $@ -raid6int1.c: raid6int.uc ../unroll.pl - $(PERL) ../unroll.pl 1 < raid6int.uc > $@ +raid6int1.c: raid6int.uc ../unroll.awk + $(AWK) ../unroll.awk -vN=1 < raid6int.uc > $@ -raid6int2.c: raid6int.uc ../unroll.pl - $(PERL) ../unroll.pl 2 < raid6int.uc > $@ +raid6int2.c: raid6int.uc ../unroll.awk + $(AWK) ../unroll.awk -vN=2 < raid6int.uc > $@ -raid6int4.c: raid6int.uc ../unroll.pl - $(PERL) ../unroll.pl 4 < raid6int.uc > $@ +raid6int4.c: raid6int.uc ../unroll.awk + $(AWK) ../unroll.awk -vN=4 < raid6int.uc > $@ -raid6int8.c: raid6int.uc ../unroll.pl - $(PERL) ../unroll.pl 8 < raid6int.uc > $@ +raid6int8.c: raid6int.uc ../unroll.awk + $(AWK) ../unroll.awk -vN=8 < raid6int.uc > $@ -raid6int16.c: raid6int.uc ../unroll.pl - $(PERL) ../unroll.pl 16 < raid6int.uc > $@ +raid6int16.c: raid6int.uc ../unroll.awk + $(AWK) ../unroll.awk -vN=16 < raid6int.uc > $@ -raid6int32.c: raid6int.uc ../unroll.pl - $(PERL) ../unroll.pl 32 < raid6int.uc > $@ +raid6int32.c: raid6int.uc ../unroll.awk + $(AWK) ../unroll.awk -vN=32 < raid6int.uc > $@ raid6tables.c: mktables ./mktables > raid6tables.c diff --git a/drivers/md/unroll.awk b/drivers/md/unroll.awk new file mode 100644 index 0000000..c6aa036 --- /dev/null +++ b/drivers/md/unroll.awk @@ -0,0 +1,20 @@ + +# This filter requires one command line option of form -vN=n +# where n must be a decimal number. +# +# Repeat each input line containing $$ n times, replacing $$ with 0...n-1. +# Replace each $# with n, and each $* with a single $. + +BEGIN { + n = N + 0 +} +{ + if (/\$\$/) { rep = n } else { rep = 1 } + for (i = 0; i < rep; ++i) { + tmp = $0 + gsub(/\$\$/, i, tmp) + gsub(/\$\#/, n, tmp) + gsub(/\$\*/, "$", tmp) + print tmp + } +} diff --git a/drivers/md/unroll.pl b/drivers/md/unroll.pl deleted file mode 100644 index 3acc710..0000000 --- a/drivers/md/unroll.pl +++ /dev/null @@ -1,24 +0,0 @@ -#!/usr/bin/perl -# -# Take a piece of C code and for each line which contains the sequence $$ -# repeat n times with $ replaced by 0...n-1; the sequence $# is replaced -# by the unrolling factor, and $* with a single $ -# - -($n) = @ARGV; -$n += 0; - -while ( defined($line = ) ) { - if ( $line =~ /\$\$/ ) { - $rep = $n; - } else { - $rep = 1; - } - for ( $i = 0 ; $i < $rep ; $i++ ) { - $tmp = $line; - $tmp =~ s/\$\$/$i/g; - $tmp =~ s/\$\#/$n/g; - $tmp =~ s/\$\*/\$/g; - print $tmp; - } -} -- cgit v0.10.2 From 417b8d4ac868cf58d6c68f52d72f7648413e0edc Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 16 Oct 2009 16:25:22 +1100 Subject: md/raid456: downlevel multicore operations to raid_run_ops The percpu conversion allowed a straightforward handoff of stripe processing to the async subsytem that initially showed some modest gains (+4%). However, this model is too simplistic and leads to stripes bouncing between raid5d and the async thread pool for every invocation of handle_stripe(). As reported by Holger this can fall into a pathological situation severely impacting throughput (6x performance loss). By downleveling the parallelism to raid_run_ops the pathological stripe_head bouncing is eliminated. This version still exhibits an average 11% throughput loss for: mdadm --create /dev/md0 /dev/sd[b-q] -n 16 -l 6 echo 1024 > /sys/block/md0/md/stripe_cache_size dd if=/dev/zero of=/dev/md0 bs=1024k count=2048 ...but the results are at least stable and can be used as a base for further multicore experimentation. Reported-by: Holger Kiehl Signed-off-by: Dan Williams Signed-off-by: NeilBrown diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index c3e5967..25c3c29 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -1139,7 +1139,7 @@ static void ops_run_check_pq(struct stripe_head *sh, struct raid5_percpu *percpu &sh->ops.zero_sum_result, percpu->spare_page, &submit); } -static void raid_run_ops(struct stripe_head *sh, unsigned long ops_request) +static void __raid_run_ops(struct stripe_head *sh, unsigned long ops_request) { int overlap_clear = 0, i, disks = sh->disks; struct dma_async_tx_descriptor *tx = NULL; @@ -1204,6 +1204,36 @@ static void raid_run_ops(struct stripe_head *sh, unsigned long ops_request) put_cpu(); } +#ifdef CONFIG_MULTICORE_RAID456 +static void async_run_ops(void *param, async_cookie_t cookie) +{ + struct stripe_head *sh = param; + unsigned long ops_request = sh->ops.request; + + clear_bit_unlock(STRIPE_OPS_REQ_PENDING, &sh->state); + wake_up(&sh->ops.wait_for_ops); + + __raid_run_ops(sh, ops_request); + release_stripe(sh); +} + +static void raid_run_ops(struct stripe_head *sh, unsigned long ops_request) +{ + /* since handle_stripe can be called outside of raid5d context + * we need to ensure sh->ops.request is de-staged before another + * request arrives + */ + wait_event(sh->ops.wait_for_ops, + !test_and_set_bit_lock(STRIPE_OPS_REQ_PENDING, &sh->state)); + sh->ops.request = ops_request; + + atomic_inc(&sh->count); + async_schedule(async_run_ops, sh); +} +#else +#define raid_run_ops __raid_run_ops +#endif + static int grow_one_stripe(raid5_conf_t *conf) { struct stripe_head *sh; @@ -1213,6 +1243,9 @@ static int grow_one_stripe(raid5_conf_t *conf) memset(sh, 0, sizeof(*sh) + (conf->raid_disks-1)*sizeof(struct r5dev)); sh->raid_conf = conf; spin_lock_init(&sh->lock); + #ifdef CONFIG_MULTICORE_RAID456 + init_waitqueue_head(&sh->ops.wait_for_ops); + #endif if (grow_buffers(sh, conf->raid_disks)) { shrink_buffers(sh, conf->raid_disks); @@ -1329,6 +1362,9 @@ static int resize_stripes(raid5_conf_t *conf, int newsize) nsh->raid_conf = conf; spin_lock_init(&nsh->lock); + #ifdef CONFIG_MULTICORE_RAID456 + init_waitqueue_head(&nsh->ops.wait_for_ops); + #endif list_add(&nsh->lru, &newstripes); } @@ -4342,37 +4378,6 @@ static int retry_aligned_read(raid5_conf_t *conf, struct bio *raid_bio) return handled; } -#ifdef CONFIG_MULTICORE_RAID456 -static void __process_stripe(void *param, async_cookie_t cookie) -{ - struct stripe_head *sh = param; - - handle_stripe(sh); - release_stripe(sh); -} - -static void process_stripe(struct stripe_head *sh, struct list_head *domain) -{ - async_schedule_domain(__process_stripe, sh, domain); -} - -static void synchronize_stripe_processing(struct list_head *domain) -{ - async_synchronize_full_domain(domain); -} -#else -static void process_stripe(struct stripe_head *sh, struct list_head *domain) -{ - handle_stripe(sh); - release_stripe(sh); - cond_resched(); -} - -static void synchronize_stripe_processing(struct list_head *domain) -{ -} -#endif - /* * This is our raid5 kernel thread. @@ -4386,7 +4391,6 @@ static void raid5d(mddev_t *mddev) struct stripe_head *sh; raid5_conf_t *conf = mddev->private; int handled; - LIST_HEAD(raid_domain); pr_debug("+++ raid5d active\n"); @@ -4423,7 +4427,9 @@ static void raid5d(mddev_t *mddev) spin_unlock_irq(&conf->device_lock); handled++; - process_stripe(sh, &raid_domain); + handle_stripe(sh); + release_stripe(sh); + cond_resched(); spin_lock_irq(&conf->device_lock); } @@ -4431,7 +4437,6 @@ static void raid5d(mddev_t *mddev) spin_unlock_irq(&conf->device_lock); - synchronize_stripe_processing(&raid_domain); async_tx_issue_pending_all(); unplug_slaves(mddev); diff --git a/drivers/md/raid5.h b/drivers/md/raid5.h index 2390e0e..dcefdc9 100644 --- a/drivers/md/raid5.h +++ b/drivers/md/raid5.h @@ -214,12 +214,20 @@ struct stripe_head { int disks; /* disks in stripe */ enum check_states check_state; enum reconstruct_states reconstruct_state; - /* stripe_operations + /** + * struct stripe_operations * @target - STRIPE_OP_COMPUTE_BLK target + * @target2 - 2nd compute target in the raid6 case + * @zero_sum_result - P and Q verification flags + * @request - async service request flags for raid_run_ops */ struct stripe_operations { int target, target2; enum sum_check_flags zero_sum_result; + #ifdef CONFIG_MULTICORE_RAID456 + unsigned long request; + wait_queue_head_t wait_for_ops; + #endif } ops; struct r5dev { struct bio req; @@ -294,6 +302,8 @@ struct r6_state { #define STRIPE_FULL_WRITE 13 /* all blocks are set to be overwritten */ #define STRIPE_BIOFILL_RUN 14 #define STRIPE_COMPUTE_RUN 15 +#define STRIPE_OPS_REQ_PENDING 16 + /* * Operation request flags */ -- cgit v0.10.2 From e4424fee1815f996dccd36be44d68ca160ec3e1b Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 16 Oct 2009 16:27:34 +1100 Subject: md: fix problems with RAID6 calculations for DDF. Signed-off-by: NeilBrown diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 25c3c29..d4ce51b 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -158,11 +158,14 @@ static int raid6_idx_to_slot(int idx, struct stripe_head *sh, { int slot; + if (sh->ddf_layout) + slot = (*count)++; if (idx == sh->pd_idx) return syndrome_disks; if (idx == sh->qd_idx) return syndrome_disks + 1; - slot = (*count)++; + if (!sh->ddf_layout) + slot = (*count)++; return slot; } @@ -727,9 +730,8 @@ static int set_syndrome_sources(struct page **srcs, struct stripe_head *sh) srcs[slot] = sh->dev[i].page; i = raid6_next_disk(i, disks); } while (i != d0_idx); - BUG_ON(count != syndrome_disks); - return count; + return syndrome_disks; } static struct dma_async_tx_descriptor * @@ -828,7 +830,6 @@ ops_run_compute6_2(struct stripe_head *sh, struct raid5_percpu *percpu) failb = slot; i = raid6_next_disk(i, disks); } while (i != d0_idx); - BUG_ON(count != syndrome_disks); BUG_ON(faila == failb); if (failb < faila) @@ -845,7 +846,7 @@ ops_run_compute6_2(struct stripe_head *sh, struct raid5_percpu *percpu) init_async_submit(&submit, ASYNC_TX_FENCE, NULL, ops_complete_compute, sh, to_addr_conv(sh, percpu)); - return async_gen_syndrome(blocks, 0, count+2, + return async_gen_syndrome(blocks, 0, syndrome_disks+2, STRIPE_SIZE, &submit); } else { struct page *dest; @@ -1935,10 +1936,15 @@ static sector_t compute_blocknr(struct stripe_head *sh, int i, int previous) case ALGORITHM_PARITY_N: break; case ALGORITHM_ROTATING_N_CONTINUE: + /* Like left_symmetric, but P is before Q */ if (sh->pd_idx == 0) i--; /* P D D D Q */ - else if (i > sh->pd_idx) - i -= 2; /* D D Q P D */ + else { + /* D D Q P D */ + if (i < sh->pd_idx) + i += raid_disks; + i -= (sh->pd_idx + 1); + } break; case ALGORITHM_LEFT_ASYMMETRIC_6: case ALGORITHM_RIGHT_ASYMMETRIC_6: diff --git a/drivers/md/raid5.h b/drivers/md/raid5.h index dcefdc9..dd70835 100644 --- a/drivers/md/raid5.h +++ b/drivers/md/raid5.h @@ -488,7 +488,7 @@ static inline int algorithm_valid_raid6(int layout) { return (layout >= 0 && layout <= 5) || - (layout == 8 || layout == 10) + (layout >= 8 && layout <= 10) || (layout >= 16 && layout <= 20); } -- cgit v0.10.2 From 5e5e3e78ed9038b8f7112835d07084eefb9daa47 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 16 Oct 2009 16:35:30 +1100 Subject: md: Fix handling of raid5 array which is being reshaped to fewer devices. When a raid5 (or raid6) array is being reshaped to have fewer devices, conf->raid_disks is the latter and hence smaller number of devices. However sometimes we want to use a number which is the total number of currently required devices - the larger of the 'old' and 'new' sizes. Before we implemented reducing the number of devices, this was always 'new' i.e. ->raid_disks. Now we need max(raid_disks, previous_raid_disks) in those places. This particularly affects assembling an array that was shutdown while in the middle of a reshape to fewer devices. md.c needs a similar fix when interpreting the md metadata. Signed-off-by: NeilBrown diff --git a/drivers/md/md.c b/drivers/md/md.c index 26ba42a..10eb1fc 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -2631,7 +2631,7 @@ static void analyze_sbs(mddev_t * mddev) rdev->desc_nr = i++; rdev->raid_disk = rdev->desc_nr; set_bit(In_sync, &rdev->flags); - } else if (rdev->raid_disk >= mddev->raid_disks) { + } else if (rdev->raid_disk >= (mddev->raid_disks - min(0, mddev->delta_disks))) { rdev->raid_disk = -1; clear_bit(In_sync, &rdev->flags); } diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index d4ce51b..c4366c9 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -1238,22 +1238,22 @@ static void raid_run_ops(struct stripe_head *sh, unsigned long ops_request) static int grow_one_stripe(raid5_conf_t *conf) { struct stripe_head *sh; + int disks = max(conf->raid_disks, conf->previous_raid_disks); sh = kmem_cache_alloc(conf->slab_cache, GFP_KERNEL); if (!sh) return 0; - memset(sh, 0, sizeof(*sh) + (conf->raid_disks-1)*sizeof(struct r5dev)); + memset(sh, 0, sizeof(*sh) + (disks-1)*sizeof(struct r5dev)); sh->raid_conf = conf; spin_lock_init(&sh->lock); #ifdef CONFIG_MULTICORE_RAID456 init_waitqueue_head(&sh->ops.wait_for_ops); #endif - if (grow_buffers(sh, conf->raid_disks)) { - shrink_buffers(sh, conf->raid_disks); + if (grow_buffers(sh, disks)) { + shrink_buffers(sh, disks); kmem_cache_free(conf->slab_cache, sh); return 0; } - sh->disks = conf->raid_disks; /* we just created an active stripe so... */ atomic_set(&sh->count, 1); atomic_inc(&conf->active_stripes); @@ -1265,7 +1265,7 @@ static int grow_one_stripe(raid5_conf_t *conf) static int grow_stripes(raid5_conf_t *conf, int num) { struct kmem_cache *sc; - int devs = conf->raid_disks; + int devs = max(conf->raid_disks, conf->previous_raid_disks); sprintf(conf->cache_name[0], "raid%d-%s", conf->level, mdname(conf->mddev)); @@ -3540,9 +3540,10 @@ static void unplug_slaves(mddev_t *mddev) { raid5_conf_t *conf = mddev->private; int i; + int devs = max(conf->raid_disks, conf->previous_raid_disks); rcu_read_lock(); - for (i = 0; i < conf->raid_disks; i++) { + for (i = 0; i < devs; i++) { mdk_rdev_t *rdev = rcu_dereference(conf->disks[i].rdev); if (rdev && !test_bit(Faulty, &rdev->flags) && atomic_read(&rdev->nr_pending)) { struct request_queue *r_queue = bdev_get_queue(rdev->bdev); @@ -4562,13 +4563,9 @@ raid5_size(mddev_t *mddev, sector_t sectors, int raid_disks) if (!sectors) sectors = mddev->dev_sectors; - if (!raid_disks) { + if (!raid_disks) /* size is defined by the smallest of previous and new size */ - if (conf->raid_disks < conf->previous_raid_disks) - raid_disks = conf->raid_disks; - else - raid_disks = conf->previous_raid_disks; - } + raid_disks = min(conf->raid_disks, conf->previous_raid_disks); sectors &= ~((sector_t)mddev->chunk_sectors - 1); sectors &= ~((sector_t)mddev->new_chunk_sectors - 1); @@ -4669,7 +4666,7 @@ static int raid5_alloc_percpu(raid5_conf_t *conf) } per_cpu_ptr(conf->percpu, cpu)->spare_page = spare_page; } - scribble = kmalloc(scribble_len(conf->raid_disks), GFP_KERNEL); + scribble = kmalloc(conf->scribble_len, GFP_KERNEL); if (!scribble) { err = -ENOMEM; break; @@ -4690,7 +4687,7 @@ static int raid5_alloc_percpu(raid5_conf_t *conf) static raid5_conf_t *setup_conf(mddev_t *mddev) { raid5_conf_t *conf; - int raid_disk, memory; + int raid_disk, memory, max_disks; mdk_rdev_t *rdev; struct disk_info *disk; @@ -4740,13 +4737,14 @@ static raid5_conf_t *setup_conf(mddev_t *mddev) conf->bypass_threshold = BYPASS_THRESHOLD; conf->raid_disks = mddev->raid_disks; - conf->scribble_len = scribble_len(conf->raid_disks); if (mddev->reshape_position == MaxSector) conf->previous_raid_disks = mddev->raid_disks; else conf->previous_raid_disks = mddev->raid_disks - mddev->delta_disks; + max_disks = max(conf->raid_disks, conf->previous_raid_disks); + conf->scribble_len = scribble_len(max_disks); - conf->disks = kzalloc(conf->raid_disks * sizeof(struct disk_info), + conf->disks = kzalloc(max_disks * sizeof(struct disk_info), GFP_KERNEL); if (!conf->disks) goto abort; @@ -4764,7 +4762,7 @@ static raid5_conf_t *setup_conf(mddev_t *mddev) list_for_each_entry(rdev, &mddev->disks, same_set) { raid_disk = rdev->raid_disk; - if (raid_disk >= conf->raid_disks + if (raid_disk >= max_disks || raid_disk < 0) continue; disk = conf->disks + raid_disk; @@ -4796,7 +4794,7 @@ static raid5_conf_t *setup_conf(mddev_t *mddev) } memory = conf->max_nr_stripes * (sizeof(struct stripe_head) + - conf->raid_disks * ((sizeof(struct bio) + PAGE_SIZE))) / 1024; + max_disks * ((sizeof(struct bio) + PAGE_SIZE))) / 1024; if (grow_stripes(conf, conf->max_nr_stripes)) { printk(KERN_ERR "raid5: couldn't allocate %dkB for buffers\n", memory); @@ -4921,7 +4919,8 @@ static int run(mddev_t *mddev) test_bit(In_sync, &rdev->flags)) working_disks++; - mddev->degraded = conf->raid_disks - working_disks; + mddev->degraded = (max(conf->raid_disks, conf->previous_raid_disks) + - working_disks); if (mddev->degraded > conf->max_degraded) { printk(KERN_ERR "raid5: not enough operational devices for %s" -- cgit v0.10.2 From 5dd33c9a4c29015f6d87568d33521c98931a387e Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 16 Oct 2009 16:40:25 +1100 Subject: md/async: don't pass a memory pointer as a page pointer. md/raid6 passes a list of 'struct page *' to the async_tx routines, which then either DMA map them for offload, or take the page_address for CPU based calculations. For RAID6 we sometime leave 'blanks' in the list of pages. For CPU based calcs, we want to treat theses as a page of zeros. For offloaded calculations, we simply don't pass a page to the hardware. Currently the 'blanks' are encoded as a pointer to raid6_empty_zero_page. This is a 4096 byte memory region, not a 'struct page'. This is mostly handled correctly but is rather ugly. So change the code to pass and expect a NULL pointer for the blanks. When taking page_address of a page, we need to check for a NULL and in that case use raid6_empty_zero_page. Signed-off-by: NeilBrown diff --git a/crypto/async_tx/async_pq.c b/crypto/async_tx/async_pq.c index b88db6d..9ab1ce4 100644 --- a/crypto/async_tx/async_pq.c +++ b/crypto/async_tx/async_pq.c @@ -30,11 +30,6 @@ */ static struct page *scribble; -static bool is_raid6_zero_block(struct page *p) -{ - return p == (void *) raid6_empty_zero_page; -} - /* the struct page *blocks[] parameter passed to async_gen_syndrome() * and async_syndrome_val() contains the 'P' destination address at * blocks[disks-2] and the 'Q' destination address at blocks[disks-1] @@ -83,7 +78,7 @@ do_async_gen_syndrome(struct dma_chan *chan, struct page **blocks, * sources and update the coefficients accordingly */ for (i = 0, idx = 0; i < src_cnt; i++) { - if (is_raid6_zero_block(blocks[i])) + if (blocks[i] == NULL) continue; dma_src[idx] = dma_map_page(dma->dev, blocks[i], offset, len, DMA_TO_DEVICE); @@ -160,9 +155,9 @@ do_sync_gen_syndrome(struct page **blocks, unsigned int offset, int disks, srcs = (void **) blocks; for (i = 0; i < disks; i++) { - if (is_raid6_zero_block(blocks[i])) { + if (blocks[i] == NULL) { BUG_ON(i > disks - 3); /* P or Q can't be zero */ - srcs[i] = blocks[i]; + srcs[i] = (void*)raid6_empty_zero_page; } else srcs[i] = page_address(blocks[i]) + offset; } @@ -290,12 +285,10 @@ async_syndrome_val(struct page **blocks, unsigned int offset, int disks, if (submit->flags & ASYNC_TX_FENCE) dma_flags |= DMA_PREP_FENCE; for (i = 0; i < disks; i++) - if (likely(blocks[i])) { - BUG_ON(is_raid6_zero_block(blocks[i])); + if (likely(blocks[i])) dma_src[i] = dma_map_page(dev, blocks[i], offset, len, DMA_TO_DEVICE); - } for (;;) { tx = device->device_prep_dma_pq_val(chan, pq, dma_src, diff --git a/crypto/async_tx/async_raid6_recov.c b/crypto/async_tx/async_raid6_recov.c index 6d73dde..8e30b6e 100644 --- a/crypto/async_tx/async_raid6_recov.c +++ b/crypto/async_tx/async_raid6_recov.c @@ -263,10 +263,10 @@ __2data_recov_n(int disks, size_t bytes, int faila, int failb, * delta p and delta q */ dp = blocks[faila]; - blocks[faila] = (void *)raid6_empty_zero_page; + blocks[faila] = NULL; blocks[disks-2] = dp; dq = blocks[failb]; - blocks[failb] = (void *)raid6_empty_zero_page; + blocks[failb] = NULL; blocks[disks-1] = dq; init_async_submit(submit, ASYNC_TX_FENCE, tx, NULL, NULL, scribble); @@ -338,7 +338,10 @@ async_raid6_2data_recov(int disks, size_t bytes, int faila, int failb, async_tx_quiesce(&submit->depend_tx); for (i = 0; i < disks; i++) - ptrs[i] = page_address(blocks[i]); + if (blocks[i] == NULL) + ptrs[i] = (void*)raid6_empty_zero_page; + else + ptrs[i] = page_address(blocks[i]); raid6_2data_recov(disks, bytes, faila, failb, ptrs); @@ -398,7 +401,10 @@ async_raid6_datap_recov(int disks, size_t bytes, int faila, async_tx_quiesce(&submit->depend_tx); for (i = 0; i < disks; i++) - ptrs[i] = page_address(blocks[i]); + if (blocks[i] == NULL) + ptrs[i] = (void*)raid6_empty_zero_page; + else + ptrs[i] = page_address(blocks[i]); raid6_datap_recov(disks, bytes, faila, ptrs); @@ -414,7 +420,7 @@ async_raid6_datap_recov(int disks, size_t bytes, int faila, * Use the dead data page as temporary storage for delta q */ dq = blocks[faila]; - blocks[faila] = (void *)raid6_empty_zero_page; + blocks[faila] = NULL; blocks[disks-1] = dq; /* in the 4 disk case we only need to perform a single source diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index c4366c9..dcd9e65 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -720,7 +720,7 @@ static int set_syndrome_sources(struct page **srcs, struct stripe_head *sh) int i; for (i = 0; i < disks; i++) - srcs[i] = (void *)raid6_empty_zero_page; + srcs[i] = NULL; count = 0; i = d0_idx; @@ -816,7 +816,7 @@ ops_run_compute6_2(struct stripe_head *sh, struct raid5_percpu *percpu) * slot number conversion for 'faila' and 'failb' */ for (i = 0; i < disks ; i++) - blocks[i] = (void *)raid6_empty_zero_page; + blocks[i] = NULL; count = 0; i = d0_idx; do { -- cgit v0.10.2 From b2141e6951ad56c8f65e70547baeabd5698e390a Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 16 Oct 2009 16:40:34 +1100 Subject: raid6/async_tx: handle holes in block list in async_syndrome_val async_syndrome_val check the P and Q blocks used for RAID6 calculations. With DDF raid6, some of the data blocks might be NULL, so this needs to be handled in the same way that async_gen_syndrome handles it. As async_syndrome_val calls async_xor, also enhance async_xor to detect and skip NULL blocks in the list. Signed-off-by: NeilBrown diff --git a/crypto/async_tx/async_pq.c b/crypto/async_tx/async_pq.c index 9ab1ce4..43b1436 100644 --- a/crypto/async_tx/async_pq.c +++ b/crypto/async_tx/async_pq.c @@ -260,8 +260,10 @@ async_syndrome_val(struct page **blocks, unsigned int offset, int disks, len); struct dma_device *device = chan ? chan->device : NULL; struct dma_async_tx_descriptor *tx; + unsigned char coefs[disks-2]; enum dma_ctrl_flags dma_flags = submit->cb_fn ? DMA_PREP_INTERRUPT : 0; dma_addr_t *dma_src = NULL; + int src_cnt = 0; BUG_ON(disks < 4); @@ -280,20 +282,35 @@ async_syndrome_val(struct page **blocks, unsigned int offset, int disks, __func__, disks, len); if (!P(blocks, disks)) dma_flags |= DMA_PREP_PQ_DISABLE_P; + else + pq[0] = dma_map_page(dev, P(blocks,disks), + offset, len, + DMA_TO_DEVICE); if (!Q(blocks, disks)) dma_flags |= DMA_PREP_PQ_DISABLE_Q; + else + pq[1] = dma_map_page(dev, Q(blocks,disks), + offset, len, + DMA_TO_DEVICE); + if (submit->flags & ASYNC_TX_FENCE) dma_flags |= DMA_PREP_FENCE; - for (i = 0; i < disks; i++) - if (likely(blocks[i])) - dma_src[i] = dma_map_page(dev, blocks[i], - offset, len, - DMA_TO_DEVICE); + for (i = 0; i < disks-2; i++) + if (likely(blocks[i])) { + dma_src[src_cnt] = dma_map_page(dev, blocks[i], + offset, len, + DMA_TO_DEVICE); + coefs[src_cnt] = raid6_gfexp[i]; + src_cnt++; + } + pq[1] = dma_map_page(dev, Q(blocks,disks), + offset, len, + DMA_TO_DEVICE); for (;;) { tx = device->device_prep_dma_pq_val(chan, pq, dma_src, - disks - 2, - raid6_gfexp, + src_cnt, + coefs, len, pqres, dma_flags); if (likely(tx)) diff --git a/crypto/async_tx/async_xor.c b/crypto/async_tx/async_xor.c index b459a90..79182dc 100644 --- a/crypto/async_tx/async_xor.c +++ b/crypto/async_tx/async_xor.c @@ -44,20 +44,23 @@ do_async_xor(struct dma_chan *chan, struct page *dest, struct page **src_list, void *cb_param_orig = submit->cb_param; enum async_tx_flags flags_orig = submit->flags; enum dma_ctrl_flags dma_flags; - int xor_src_cnt; + int xor_src_cnt = 0; dma_addr_t dma_dest; /* map the dest bidrectional in case it is re-used as a source */ dma_dest = dma_map_page(dma->dev, dest, offset, len, DMA_BIDIRECTIONAL); for (i = 0; i < src_cnt; i++) { /* only map the dest once */ + if (!src_list[i]) + continue; if (unlikely(src_list[i] == dest)) { - dma_src[i] = dma_dest; + dma_src[xor_src_cnt++] = dma_dest; continue; } - dma_src[i] = dma_map_page(dma->dev, src_list[i], offset, - len, DMA_TO_DEVICE); + dma_src[xor_src_cnt++] = dma_map_page(dma->dev, src_list[i], offset, + len, DMA_TO_DEVICE); } + src_cnt = xor_src_cnt; while (src_cnt) { submit->flags = flags_orig; @@ -123,7 +126,7 @@ do_sync_xor(struct page *dest, struct page **src_list, unsigned int offset, int src_cnt, size_t len, struct async_submit_ctl *submit) { int i; - int xor_src_cnt; + int xor_src_cnt = 0; int src_off = 0; void *dest_buf; void **srcs; @@ -135,8 +138,9 @@ do_sync_xor(struct page *dest, struct page **src_list, unsigned int offset, /* convert to buffer pointers */ for (i = 0; i < src_cnt; i++) - srcs[i] = page_address(src_list[i]) + offset; - + if (src_list[i]) + srcs[xor_src_cnt++] = page_address(src_list[i]) + offset; + src_cnt = xor_src_cnt; /* set destination address */ dest_buf = page_address(dest) + offset; -- cgit v0.10.2 From 2d152c6ba81c8a7776103b517fa454b8da0419aa Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 15 Oct 2009 23:08:05 -0400 Subject: drm/radeon/kms: fix legacy quirk handling Need to check the return type for the quirk function to decide whether we add the connectors and encoders. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c index e91aba8..3c402b9 100644 --- a/drivers/gpu/drm/radeon/radeon_combios.c +++ b/drivers/gpu/drm/radeon/radeon_combios.c @@ -1626,8 +1626,9 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) break; } - radeon_apply_legacy_quirks(dev, i, &connector, - &ddc_i2c); + if (!radeon_apply_legacy_quirks(dev, i, &connector, + &ddc_i2c)) + continue; switch (connector) { case CONNECTOR_PROPRIETARY_LEGACY: -- cgit v0.10.2 From d0c403e950d449c8c413a1fbf05dfec45ce03e55 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 15 Oct 2009 23:38:32 -0400 Subject: drm/radeon/kms: fix support for original r100 Original radeon didn't have a connector table in the bios. Check for the CRT table and if we have one, add a VGA connector. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c index 3c402b9..8298c99 100644 --- a/drivers/gpu/drm/radeon/radeon_combios.c +++ b/drivers/gpu/drm/radeon/radeon_combios.c @@ -1773,8 +1773,25 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) DRM_MODE_CONNECTOR_DVII, &ddc_i2c); } else { - DRM_DEBUG("No connector info found\n"); - return false; + uint16_t crt_info = + combios_get_table_offset(dev, COMBIOS_CRT_INFO_TABLE); + DRM_DEBUG("Found CRT table, assuming VGA connector\n"); + if (crt_info) { + radeon_add_legacy_encoder(dev, + radeon_get_encoder_id(dev, + ATOM_DEVICE_CRT1_SUPPORT, + 1), + ATOM_DEVICE_CRT1_SUPPORT); + ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_VGA_DDC); + radeon_add_legacy_connector(dev, + 0, + ATOM_DEVICE_CRT1_SUPPORT, + DRM_MODE_CONNECTOR_VGA, + &ddc_i2c); + } else { + DRM_DEBUG("No connector info found\n"); + return false; + } } } -- cgit v0.10.2 From 02a06d3042e208cb74369838b178ca9512192be4 Mon Sep 17 00:00:00 2001 From: Barry Song <21cnbao@gmail.com> Date: Fri, 16 Oct 2009 18:13:38 +0800 Subject: ASoC: Fix possible codec_dai->ops NULL pointer problems Some codec DAIs like stac9766, wm9712, wm9713, ad1980 don't register themselves then it loses to the chance to be given a null_dai_ops in snd_soc_register_dai if they have no ops. When functions like soc_pcm_open, soc_pcm_hw_params etc. access the ops field in these DAIs, panic will happen. Signed-off-by: Barry Song <21cnbao@gmail.com> Signed-off-by: Mark Brown diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 7ff04ad..0a1b2f6 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -834,6 +834,9 @@ EXPORT_SYMBOL_GPL(snd_soc_resume_device); #define soc_resume NULL #endif +static struct snd_soc_dai_ops null_dai_ops = { +}; + static void snd_soc_instantiate_card(struct snd_soc_card *card) { struct platform_device *pdev = container_of(card->dev, @@ -877,6 +880,11 @@ static void snd_soc_instantiate_card(struct snd_soc_card *card) ac97 = 1; } + for (i = 0; i < card->num_links; i++) { + if (!card->dai_link[i].codec_dai->ops) + card->dai_link[i].codec_dai->ops = &null_dai_ops; + } + /* If we have AC97 in the system then don't wait for the * codec. This will need revisiting if we have to handle * systems with mixed AC97 and non-AC97 parts. Only check for @@ -2329,9 +2337,6 @@ static int snd_soc_unregister_card(struct snd_soc_card *card) return 0; } -static struct snd_soc_dai_ops null_dai_ops = { -}; - /** * snd_soc_register_dai - Register a DAI with the ASoC core * -- cgit v0.10.2 From c038e51e841581cc3fb9a76e5e16331331e9c85c Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Mon, 19 Oct 2009 15:43:48 +0800 Subject: drm/i915: fix to setup display reference clock control on Ironlake For new stepping of PCH, the display reference clock is fully under driver's control. This one trys to setup all needed reference clock for different outputs. Older stepping of PCH chipset should be ignoring this. This fixes output failure issue on newer PCH which requires driver to take control of reference clock enabling. Cc: Stable Team Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index b481358..cd0ffa0 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -2158,11 +2158,11 @@ #define DREF_CPU_SOURCE_OUTPUT_MASK (3<<13) #define DREF_SSC_SOURCE_DISABLE (0<<11) #define DREF_SSC_SOURCE_ENABLE (2<<11) -#define DREF_SSC_SOURCE_MASK (2<<11) +#define DREF_SSC_SOURCE_MASK (3<<11) #define DREF_NONSPREAD_SOURCE_DISABLE (0<<9) #define DREF_NONSPREAD_CK505_ENABLE (1<<9) #define DREF_NONSPREAD_SOURCE_ENABLE (2<<9) -#define DREF_NONSPREAD_SOURCE_MASK (2<<9) +#define DREF_NONSPREAD_SOURCE_MASK (3<<9) #define DREF_SUPERSPREAD_SOURCE_DISABLE (0<<7) #define DREF_SUPERSPREAD_SOURCE_ENABLE (2<<7) #define DREF_SSC4_DOWNSPREAD (0<<6) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 123cce1..db4c387 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2814,6 +2814,46 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, link_bw, &m_n); } + /* Ironlake: try to setup display ref clock before DPLL + * enabling. This is only under driver's control after + * PCH B stepping, previous chipset stepping should be + * ignoring this setting. + */ + if (IS_IGDNG(dev)) { + temp = I915_READ(PCH_DREF_CONTROL); + /* Always enable nonspread source */ + temp &= ~DREF_NONSPREAD_SOURCE_MASK; + temp |= DREF_NONSPREAD_SOURCE_ENABLE; + I915_WRITE(PCH_DREF_CONTROL, temp); + POSTING_READ(PCH_DREF_CONTROL); + + temp &= ~DREF_SSC_SOURCE_MASK; + temp |= DREF_SSC_SOURCE_ENABLE; + I915_WRITE(PCH_DREF_CONTROL, temp); + POSTING_READ(PCH_DREF_CONTROL); + + udelay(200); + + if (is_edp) { + if (dev_priv->lvds_use_ssc) { + temp |= DREF_SSC1_ENABLE; + I915_WRITE(PCH_DREF_CONTROL, temp); + POSTING_READ(PCH_DREF_CONTROL); + + udelay(200); + + temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK; + temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD; + I915_WRITE(PCH_DREF_CONTROL, temp); + POSTING_READ(PCH_DREF_CONTROL); + } else { + temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD; + I915_WRITE(PCH_DREF_CONTROL, temp); + POSTING_READ(PCH_DREF_CONTROL); + } + } + } + if (IS_IGD(dev)) { fp = (1 << clock.n) << 16 | clock.m1 << 8 | clock.m2; if (has_reduced_clock) -- cgit v0.10.2 From b1f60b7029989da71fd8ea1b1176480fac9e846c Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Mon, 19 Oct 2009 15:43:49 +0800 Subject: drm/i915: fix panel fitting filter coefficient select for Ironlake Must set filter selection as hardcoded coefficients for medium 3x3 filtering, which matches vbios setting for Ironlake. This fixes display corrupt issue on HP arrandale with new vbios. Cc: Stable Team Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index cd0ffa0..78f336e 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -2039,6 +2039,11 @@ #define PFA_CTL_1 0x68080 #define PFB_CTL_1 0x68880 #define PF_ENABLE (1<<31) +#define PF_FILTER_MASK (3<<23) +#define PF_FILTER_PROGRAMMED (0<<23) +#define PF_FILTER_MED_3x3 (1<<23) +#define PF_FILTER_EDGE_ENHANCE (2<<23) +#define PF_FILTER_EDGE_SOFTEN (3<<23) #define PFA_WIN_SZ 0x68074 #define PFB_WIN_SZ 0x68874 #define PFA_WIN_POS 0x68070 diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index db4c387..e189fd6 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -1515,7 +1515,7 @@ static void igdng_crtc_dpms(struct drm_crtc *crtc, int mode) /* Enable panel fitting for LVDS */ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { temp = I915_READ(pf_ctl_reg); - I915_WRITE(pf_ctl_reg, temp | PF_ENABLE); + I915_WRITE(pf_ctl_reg, temp | PF_ENABLE | PF_FILTER_MED_3x3); /* currently full aspect */ I915_WRITE(pf_win_pos, 0); -- cgit v0.10.2 From d54e9d28241fd52cca3df4f6bc2054a30d453fed Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Mon, 19 Oct 2009 15:43:51 +0800 Subject: drm/i915: quiet DP i2c init Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index f4856a5..d834475 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -400,7 +400,7 @@ intel_dp_i2c_init(struct intel_output *intel_output, const char *name) { struct intel_dp_priv *dp_priv = intel_output->dev_priv; - DRM_ERROR("i2c_init %s\n", name); + DRM_DEBUG_KMS("i2c_init %s\n", name); dp_priv->algo.running = false; dp_priv->algo.address = 0; dp_priv->algo.aux_ch = intel_dp_i2c_aux_ch; -- cgit v0.10.2 From 6629542e79255e0dbef8ec82eaf644e1b2546c3c Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 19 Oct 2009 18:09:32 -0700 Subject: md/raid6: kill a gcc-4.0.1 'uninitialized variable' warning Signed-off-by: Dan Williams diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index dcd9e65..81abefc 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -156,16 +156,16 @@ static inline int raid6_next_disk(int disk, int raid_disks) static int raid6_idx_to_slot(int idx, struct stripe_head *sh, int *count, int syndrome_disks) { - int slot; + int slot = *count; if (sh->ddf_layout) - slot = (*count)++; + (*count)++; if (idx == sh->pd_idx) return syndrome_disks; if (idx == sh->qd_idx) return syndrome_disks + 1; if (!sh->ddf_layout) - slot = (*count)++; + (*count)++; return slot; } -- cgit v0.10.2 From 5676470f06f783aebf545c8f17ca772911022068 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 19 Oct 2009 18:09:32 -0700 Subject: async_pq: kill a stray dma_map() call and other cleanups - update the kernel doc for async_syndrome to indicate what NULL in the source list means - whitespace fixups Signed-off-by: Dan Williams diff --git a/crypto/async_tx/async_pq.c b/crypto/async_tx/async_pq.c index 43b1436..6047656 100644 --- a/crypto/async_tx/async_pq.c +++ b/crypto/async_tx/async_pq.c @@ -181,10 +181,14 @@ do_sync_gen_syndrome(struct page **blocks, unsigned int offset, int disks, * blocks[disks-1] to NULL. When P or Q is omitted 'len' must be <= * PAGE_SIZE as a temporary buffer of this size is used in the * synchronous path. 'disks' always accounts for both destination - * buffers. + * buffers. If any source buffers (blocks[i] where i < disks - 2) are + * set to NULL those buffers will be replaced with the raid6_zero_page + * in the synchronous path and omitted in the hardware-asynchronous + * path. * * 'blocks' note: if submit->scribble is NULL then the contents of - * 'blocks' may be overridden + * 'blocks' may be overwritten to perform address conversions + * (dma_map_page() or page_address()). */ struct dma_async_tx_descriptor * async_gen_syndrome(struct page **blocks, unsigned int offset, int disks, @@ -283,13 +287,13 @@ async_syndrome_val(struct page **blocks, unsigned int offset, int disks, if (!P(blocks, disks)) dma_flags |= DMA_PREP_PQ_DISABLE_P; else - pq[0] = dma_map_page(dev, P(blocks,disks), + pq[0] = dma_map_page(dev, P(blocks, disks), offset, len, DMA_TO_DEVICE); if (!Q(blocks, disks)) dma_flags |= DMA_PREP_PQ_DISABLE_Q; else - pq[1] = dma_map_page(dev, Q(blocks,disks), + pq[1] = dma_map_page(dev, Q(blocks, disks), offset, len, DMA_TO_DEVICE); @@ -303,9 +307,6 @@ async_syndrome_val(struct page **blocks, unsigned int offset, int disks, coefs[src_cnt] = raid6_gfexp[i]; src_cnt++; } - pq[1] = dma_map_page(dev, Q(blocks,disks), - offset, len, - DMA_TO_DEVICE); for (;;) { tx = device->device_prep_dma_pq_val(chan, pq, dma_src, -- cgit v0.10.2 From 030b07720be0f3bfada12ff6bfa3c61a91212f32 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 19 Oct 2009 18:09:32 -0700 Subject: async_pq: rename scribble page The global scribble page is used as a temporary destination buffer when disabling the P or Q result is requested. The local scribble buffer contains memory for performing address conversions. Rename the global variable to avoid confusion. Signed-off-by: Dan Williams diff --git a/crypto/async_tx/async_pq.c b/crypto/async_tx/async_pq.c index 6047656..6b5cc4f 100644 --- a/crypto/async_tx/async_pq.c +++ b/crypto/async_tx/async_pq.c @@ -26,9 +26,10 @@ #include /** - * scribble - space to hold throwaway P buffer for synchronous gen_syndrome + * pq_scribble_page - space to hold throwaway P or Q buffer for + * synchronous gen_syndrome */ -static struct page *scribble; +static struct page *pq_scribble_page; /* the struct page *blocks[] parameter passed to async_gen_syndrome() * and async_syndrome_val() contains the 'P' destination address at @@ -226,11 +227,11 @@ async_gen_syndrome(struct page **blocks, unsigned int offset, int disks, async_tx_quiesce(&submit->depend_tx); if (!P(blocks, disks)) { - P(blocks, disks) = scribble; + P(blocks, disks) = pq_scribble_page; BUG_ON(len + offset > PAGE_SIZE); } if (!Q(blocks, disks)) { - Q(blocks, disks) = scribble; + Q(blocks, disks) = pq_scribble_page; BUG_ON(len + offset > PAGE_SIZE); } do_sync_gen_syndrome(blocks, offset, disks, len, submit); @@ -384,9 +385,9 @@ EXPORT_SYMBOL_GPL(async_syndrome_val); static int __init async_pq_init(void) { - scribble = alloc_page(GFP_KERNEL); + pq_scribble_page = alloc_page(GFP_KERNEL); - if (scribble) + if (pq_scribble_page) return 0; pr_err("%s: failed to allocate required spare page\n", __func__); @@ -396,7 +397,7 @@ static int __init async_pq_init(void) static void __exit async_pq_exit(void) { - put_page(scribble); + put_page(pq_scribble_page); } module_init(async_pq_init); -- cgit v0.10.2 From da17bf4306fd3a52e938b121df82a7baa10eb282 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 19 Oct 2009 14:05:12 -0700 Subject: async_tx: fix asynchronous raid6 recovery for ddf layouts The raid6 recovery code currently requires special handling of the 4-disk and 5-disk recovery scenarios for the native layout. Quoting from commit 0a82a623: In these situations the default N-disk algorithm will present 0-source or 1-source operations to dma devices. To cover for dma devices where the minimum source count is 2 we implement 4-disk and 5-disk handling in the recovery code. The ddf layout presents disks=6 and disks=7 to the recovery code in these situations. Instead of looking at the number of disks count the number of non-zero sources in the list and call the special case code when the number of non-failed sources is 0 or 1. [neilb@suse.de: replace 'ddf' flag with counting good sources] Signed-off-by: Dan Williams diff --git a/crypto/async_tx/async_raid6_recov.c b/crypto/async_tx/async_raid6_recov.c index 8e30b6e..943f2ab 100644 --- a/crypto/async_tx/async_raid6_recov.c +++ b/crypto/async_tx/async_raid6_recov.c @@ -131,8 +131,8 @@ async_mult(struct page *dest, struct page *src, u8 coef, size_t len, } static struct dma_async_tx_descriptor * -__2data_recov_4(size_t bytes, int faila, int failb, struct page **blocks, - struct async_submit_ctl *submit) +__2data_recov_4(int disks, size_t bytes, int faila, int failb, + struct page **blocks, struct async_submit_ctl *submit) { struct dma_async_tx_descriptor *tx = NULL; struct page *p, *q, *a, *b; @@ -143,8 +143,8 @@ __2data_recov_4(size_t bytes, int faila, int failb, struct page **blocks, void *cb_param = submit->cb_param; void *scribble = submit->scribble; - p = blocks[4-2]; - q = blocks[4-1]; + p = blocks[disks-2]; + q = blocks[disks-1]; a = blocks[faila]; b = blocks[failb]; @@ -170,8 +170,8 @@ __2data_recov_4(size_t bytes, int faila, int failb, struct page **blocks, } static struct dma_async_tx_descriptor * -__2data_recov_5(size_t bytes, int faila, int failb, struct page **blocks, - struct async_submit_ctl *submit) +__2data_recov_5(int disks, size_t bytes, int faila, int failb, + struct page **blocks, struct async_submit_ctl *submit) { struct dma_async_tx_descriptor *tx = NULL; struct page *p, *q, *g, *dp, *dq; @@ -181,21 +181,22 @@ __2data_recov_5(size_t bytes, int faila, int failb, struct page **blocks, dma_async_tx_callback cb_fn = submit->cb_fn; void *cb_param = submit->cb_param; void *scribble = submit->scribble; - int uninitialized_var(good); - int i; + int good_srcs, good, i; - for (i = 0; i < 3; i++) { + good_srcs = 0; + good = -1; + for (i = 0; i < disks-2; i++) { + if (blocks[i] == NULL) + continue; if (i == faila || i == failb) continue; - else { - good = i; - break; - } + good = i; + good_srcs++; } - BUG_ON(i >= 3); + BUG_ON(good_srcs > 1); - p = blocks[5-2]; - q = blocks[5-1]; + p = blocks[disks-2]; + q = blocks[disks-1]; g = blocks[good]; /* Compute syndrome with zero for the missing data pages @@ -323,6 +324,8 @@ struct dma_async_tx_descriptor * async_raid6_2data_recov(int disks, size_t bytes, int faila, int failb, struct page **blocks, struct async_submit_ctl *submit) { + int non_zero_srcs, i; + BUG_ON(faila == failb); if (failb < faila) swap(faila, failb); @@ -334,12 +337,11 @@ async_raid6_2data_recov(int disks, size_t bytes, int faila, int failb, */ if (!submit->scribble) { void **ptrs = (void **) blocks; - int i; async_tx_quiesce(&submit->depend_tx); for (i = 0; i < disks; i++) if (blocks[i] == NULL) - ptrs[i] = (void*)raid6_empty_zero_page; + ptrs[i] = (void *) raid6_empty_zero_page; else ptrs[i] = page_address(blocks[i]); @@ -350,19 +352,30 @@ async_raid6_2data_recov(int disks, size_t bytes, int faila, int failb, return NULL; } - switch (disks) { - case 4: + non_zero_srcs = 0; + for (i = 0; i < disks-2 && non_zero_srcs < 4; i++) + if (blocks[i]) + non_zero_srcs++; + switch (non_zero_srcs) { + case 0: + case 1: + /* There must be at least 2 sources - the failed devices. */ + BUG(); + + case 2: /* dma devices do not uniformly understand a zero source pq * operation (in contrast to the synchronous case), so - * explicitly handle the 4 disk special case + * explicitly handle the special case of a 4 disk array with + * both data disks missing. */ - return __2data_recov_4(bytes, faila, failb, blocks, submit); - case 5: + return __2data_recov_4(disks, bytes, faila, failb, blocks, submit); + case 3: /* dma devices do not uniformly understand a single * source pq operation (in contrast to the synchronous - * case), so explicitly handle the 5 disk special case + * case), so explicitly handle the special case of a 5 disk + * array with 2 of 3 data disks missing. */ - return __2data_recov_5(bytes, faila, failb, blocks, submit); + return __2data_recov_5(disks, bytes, faila, failb, blocks, submit); default: return __2data_recov_n(disks, bytes, faila, failb, blocks, submit); } @@ -388,6 +401,7 @@ async_raid6_datap_recov(int disks, size_t bytes, int faila, dma_async_tx_callback cb_fn = submit->cb_fn; void *cb_param = submit->cb_param; void *scribble = submit->scribble; + int good_srcs, good, i; struct page *srcs[2]; pr_debug("%s: disks: %d len: %zu\n", __func__, disks, bytes); @@ -397,7 +411,6 @@ async_raid6_datap_recov(int disks, size_t bytes, int faila, */ if (!scribble) { void **ptrs = (void **) blocks; - int i; async_tx_quiesce(&submit->depend_tx); for (i = 0; i < disks; i++) @@ -413,6 +426,20 @@ async_raid6_datap_recov(int disks, size_t bytes, int faila, return NULL; } + good_srcs = 0; + good = -1; + for (i = 0; i < disks-2; i++) { + if (i == faila) + continue; + if (blocks[i]) { + good = i; + good_srcs++; + if (good_srcs > 1) + break; + } + } + BUG_ON(good_srcs == 0); + p = blocks[disks-2]; q = blocks[disks-1]; @@ -423,11 +450,10 @@ async_raid6_datap_recov(int disks, size_t bytes, int faila, blocks[faila] = NULL; blocks[disks-1] = dq; - /* in the 4 disk case we only need to perform a single source - * multiplication + /* in the 4-disk case we only need to perform a single source + * multiplication with the one good data block. */ - if (disks == 4) { - int good = faila == 0 ? 1 : 0; + if (good_srcs == 1) { struct page *g = blocks[good]; init_async_submit(submit, ASYNC_TX_FENCE, tx, NULL, NULL, -- cgit v0.10.2 From e57130698fe3dd2b7d617d90bbf86474473cb40c Mon Sep 17 00:00:00 2001 From: Jamie Lentin Date: Tue, 20 Oct 2009 14:36:49 -0700 Subject: Input: atkbd - add a quirk for OQO 01+ multimedia keys OQO 01+ multimedia keys produce 6x on press, e0 6x upon release. As a result, Linux thinks that another key has been pressed (or is repeating), when it is actually a release of the same key. Mangle the release scancode when running on OQO so that driver recognizes it as such. Since the device does not have external PS/2 ports mangling is safe since there is no chance that an external keyboard is connected. Signed-off-by: Jamie Lentin Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index 271c0b7..e9acbe0 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -233,6 +233,7 @@ struct atkbd { */ static void (*atkbd_platform_fixup)(struct atkbd *, const void *data); static void *atkbd_platform_fixup_data; +static unsigned int (*atkbd_platform_scancode_fixup)(struct atkbd *, unsigned int); static ssize_t atkbd_attr_show_helper(struct device *dev, char *buf, ssize_t (*handler)(struct atkbd *, char *)); @@ -393,6 +394,9 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data, input_event(dev, EV_MSC, MSC_RAW, code); + if (atkbd_platform_scancode_fixup) + code = atkbd_platform_scancode_fixup(atkbd, code); + if (atkbd->translated) { if (atkbd->emul || atkbd_need_xlate(atkbd->xl_bit, code)) { @@ -923,6 +927,22 @@ static unsigned int atkbd_volume_forced_release_keys[] = { }; /* + * OQO 01+ multimedia keys (64--66) generate e0 6x upon release whereas + * they should be generating e4-e6 (0x80 | code). + */ +static unsigned int atkbd_oqo_01plus_scancode_fixup(struct atkbd *atkbd, + unsigned int code) +{ + if (atkbd->translated && atkbd->emul == 1 && + (code == 0x64 || code == 0x65 || code == 0x66)) { + atkbd->emul = 0; + code |= 0x80; + } + + return code; +} + +/* * atkbd_set_keycode_table() initializes keyboard's keycode table * according to the selected scancode set */ @@ -1527,6 +1547,13 @@ static int __init atkbd_setup_forced_release(const struct dmi_system_id *id) return 0; } +static int __init atkbd_setup_scancode_fixup(const struct dmi_system_id *id) +{ + atkbd_platform_scancode_fixup = id->driver_data; + + return 0; +} + static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { { .ident = "Dell Laptop", @@ -1663,6 +1690,15 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { .callback = atkbd_setup_forced_release, .driver_data = atkdb_soltech_ta12_forced_release_keys, }, + { + .ident = "OQO Model 01+", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "OQO"), + DMI_MATCH(DMI_PRODUCT_NAME, "ZEPTO"), + }, + .callback = atkbd_setup_scancode_fixup, + .driver_data = atkbd_oqo_01plus_scancode_fixup, + }, { } }; -- cgit v0.10.2 From 721a669b7225edeeb0ca8e2bf71b83882326a71b Mon Sep 17 00:00:00 2001 From: Soeren Sandmann Date: Tue, 15 Sep 2009 14:33:08 +0200 Subject: perf events: Fix swevent hrtimer sampling by keeping track of remaining time when enabling/disabling swevent hrtimers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Make the hrtimer based events work for sysprof. Whenever a swevent is scheduled out, the hrtimer is canceled. When it is scheduled back in, the timer is restarted. This happens every scheduler tick, which means the timer never expired because it was getting repeatedly restarted over and over with the same period. To fix that, save the remaining time when disabling; when reenabling, use that saved time as the period instead of the user-specified sampling period. Also, move the starting and stopping of the hrtimers to helper functions instead of duplicating the code. Signed-off-by: Søren Sandmann Pedersen LKML-Reference: Signed-off-by: Ingo Molnar diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index 2e6d95f..9e70126 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -471,8 +471,8 @@ struct hw_perf_event { unsigned long event_base; int idx; }; - union { /* software */ - atomic64_t count; + struct { /* software */ + s64 remaining; struct hrtimer hrtimer; }; }; diff --git a/kernel/perf_event.c b/kernel/perf_event.c index afb7ef3..33ff019 100644 --- a/kernel/perf_event.c +++ b/kernel/perf_event.c @@ -3969,6 +3969,42 @@ static enum hrtimer_restart perf_swevent_hrtimer(struct hrtimer *hrtimer) return ret; } +static void perf_swevent_start_hrtimer(struct perf_event *event) +{ + struct hw_perf_event *hwc = &event->hw; + + hrtimer_init(&hwc->hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); + hwc->hrtimer.function = perf_swevent_hrtimer; + if (hwc->sample_period) { + u64 period; + + if (hwc->remaining) { + if (hwc->remaining < 0) + period = 10000; + else + period = hwc->remaining; + hwc->remaining = 0; + } else { + period = max_t(u64, 10000, hwc->sample_period); + } + __hrtimer_start_range_ns(&hwc->hrtimer, + ns_to_ktime(period), 0, + HRTIMER_MODE_REL, 0); + } +} + +static void perf_swevent_cancel_hrtimer(struct perf_event *event) +{ + struct hw_perf_event *hwc = &event->hw; + + if (hwc->sample_period) { + ktime_t remaining = hrtimer_get_remaining(&hwc->hrtimer); + hwc->remaining = ktime_to_ns(remaining); + + hrtimer_cancel(&hwc->hrtimer); + } +} + /* * Software event: cpu wall time clock */ @@ -3991,22 +4027,14 @@ static int cpu_clock_perf_event_enable(struct perf_event *event) int cpu = raw_smp_processor_id(); atomic64_set(&hwc->prev_count, cpu_clock(cpu)); - hrtimer_init(&hwc->hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); - hwc->hrtimer.function = perf_swevent_hrtimer; - if (hwc->sample_period) { - u64 period = max_t(u64, 10000, hwc->sample_period); - __hrtimer_start_range_ns(&hwc->hrtimer, - ns_to_ktime(period), 0, - HRTIMER_MODE_REL, 0); - } + perf_swevent_start_hrtimer(event); return 0; } static void cpu_clock_perf_event_disable(struct perf_event *event) { - if (event->hw.sample_period) - hrtimer_cancel(&event->hw.hrtimer); + perf_swevent_cancel_hrtimer(event); cpu_clock_perf_event_update(event); } @@ -4043,22 +4071,15 @@ static int task_clock_perf_event_enable(struct perf_event *event) now = event->ctx->time; atomic64_set(&hwc->prev_count, now); - hrtimer_init(&hwc->hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); - hwc->hrtimer.function = perf_swevent_hrtimer; - if (hwc->sample_period) { - u64 period = max_t(u64, 10000, hwc->sample_period); - __hrtimer_start_range_ns(&hwc->hrtimer, - ns_to_ktime(period), 0, - HRTIMER_MODE_REL, 0); - } + + perf_swevent_start_hrtimer(event); return 0; } static void task_clock_perf_event_disable(struct perf_event *event) { - if (event->hw.sample_period) - hrtimer_cancel(&event->hw.hrtimer); + perf_swevent_cancel_hrtimer(event); task_clock_perf_event_update(event, event->ctx->time); } -- cgit v0.10.2 From 54f4407608c59712a8f5ec1e10dfac40bef5a2e7 Mon Sep 17 00:00:00 2001 From: Soeren Sandmann Date: Thu, 22 Oct 2009 18:34:08 +0200 Subject: perf events: Don't generate events for the idle task when exclude_idle is set MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Getting samples for the idle task is often not interesting, so don't generate them when exclude_idle is set for the event in question. Signed-off-by: Søren Sandmann Pedersen Cc: Peter Zijlstra Cc: Mike Galbraith Cc: Paul Mackerras Cc: Arnaldo Carvalho de Melo Cc: Frederic Weisbecker Cc: Steven Rostedt LKML-Reference: Signed-off-by: Ingo Molnar diff --git a/kernel/perf_event.c b/kernel/perf_event.c index 33ff019..7f29643 100644 --- a/kernel/perf_event.c +++ b/kernel/perf_event.c @@ -3959,8 +3959,9 @@ static enum hrtimer_restart perf_swevent_hrtimer(struct hrtimer *hrtimer) regs = task_pt_regs(current); if (regs) { - if (perf_event_overflow(event, 0, &data, regs)) - ret = HRTIMER_NORESTART; + if (!(event->attr.exclude_idle && current->pid == 0)) + if (perf_event_overflow(event, 0, &data, regs)) + ret = HRTIMER_NORESTART; } period = max_t(u64, 10000, event->hw.sample_period); -- cgit v0.10.2 From 14a3f40aafacde1dfd6912327ae14df4baf10304 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Fri, 23 Oct 2009 07:31:01 -0700 Subject: x86: Remove STACKPROTECTOR_ALL STACKPROTECTOR_ALL has a really high overhead (runtime and stack footprint) and is not really worth it protection wise (the normal STACKPROTECTOR is in effect for all functions with buffers already), so lets just remove the option entirely. Reported-by: Dave Jones Reported-by: Chuck Ebbert Signed-off-by: Arjan van de Ven Cc: Eric Sandeen LKML-Reference: <20091023073101.3dce4ebb@infradead.org> Signed-off-by: Ingo Molnar diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 07e0114..72ace95 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1443,12 +1443,8 @@ config SECCOMP If unsure, say Y. Only embedded should say N here. -config CC_STACKPROTECTOR_ALL - bool - config CC_STACKPROTECTOR bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)" - select CC_STACKPROTECTOR_ALL ---help--- This option turns on the -fstack-protector GCC feature. This feature puts, at the beginning of functions, a canary value on diff --git a/arch/x86/Makefile b/arch/x86/Makefile index a012ee8..d2d24c9 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -76,7 +76,6 @@ ifdef CONFIG_CC_STACKPROTECTOR cc_has_sp := $(srctree)/scripts/gcc-x86_$(BITS)-has-stack-protector.sh ifeq ($(shell $(CONFIG_SHELL) $(cc_has_sp) $(CC) $(biarch)),y) stackp-y := -fstack-protector - stackp-$(CONFIG_CC_STACKPROTECTOR_ALL) += -fstack-protector-all KBUILD_CFLAGS += $(stackp-y) else $(warning stack protector enabled but no compiler support) -- cgit v0.10.2 From 0e442c60dd39ac6924b11a20497734bd2303744c Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Mon, 19 Oct 2009 10:09:33 +0900 Subject: drm/i915: add FIFO watermark support for G4x Turns out G4x needs to have sensible watermarks set, especially for self-refresh enabled modes. Add support for it. Signed-off-by: Jesse Barnes Tested-by: Dirk Hohndel Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 78f336e..1687edf 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -1799,17 +1799,29 @@ #define DSPARB_AEND_SHIFT 0 #define DSPFW1 0x70034 +#define DSPFW_SR_SHIFT 23 +#define DSPFW_CURSORB_SHIFT 16 +#define DSPFW_PLANEB_SHIFT 8 #define DSPFW2 0x70038 +#define DSPFW_CURSORA_MASK 0x00003f00 +#define DSPFW_CURSORA_SHIFT 16 #define DSPFW3 0x7003c +#define DSPFW_HPLL_SR_EN (1<<31) +#define DSPFW_CURSOR_SR_SHIFT 24 #define IGD_SELF_REFRESH_EN (1<<30) /* FIFO watermark sizes etc */ +#define G4X_FIFO_LINE_SIZE 64 #define I915_FIFO_LINE_SIZE 64 #define I830_FIFO_LINE_SIZE 32 + +#define G4X_FIFO_SIZE 127 #define I945_FIFO_SIZE 127 /* 945 & 965 */ #define I915_FIFO_SIZE 95 #define I855GM_FIFO_SIZE 127 /* In cachelines */ #define I830_FIFO_SIZE 95 + +#define G4X_MAX_WM 0x3f #define I915_MAX_WM 0x3f #define IGD_DISPLAY_FIFO 512 /* in 64byte unit */ diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index e189fd6..47d6ff0 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2143,6 +2143,13 @@ static struct intel_watermark_params igd_cursor_hplloff_wm = { IGD_CURSOR_GUARD_WM, IGD_FIFO_LINE_SIZE }; +static struct intel_watermark_params g4x_wm_info = { + G4X_FIFO_SIZE, + G4X_MAX_WM, + G4X_MAX_WM, + 2, + G4X_FIFO_LINE_SIZE, +}; static struct intel_watermark_params i945_wm_info = { I945_FIFO_SIZE, I915_MAX_WM, @@ -2433,17 +2440,74 @@ static int i830_get_fifo_size(struct drm_device *dev, int plane) return size; } -static void g4x_update_wm(struct drm_device *dev, int unused, int unused2, - int unused3, int unused4) +static void g4x_update_wm(struct drm_device *dev, int planea_clock, + int planeb_clock, int sr_hdisplay, int pixel_size) { struct drm_i915_private *dev_priv = dev->dev_private; - u32 fw_blc_self = I915_READ(FW_BLC_SELF); + int total_size, cacheline_size; + int planea_wm, planeb_wm, cursora_wm, cursorb_wm, cursor_sr; + struct intel_watermark_params planea_params, planeb_params; + unsigned long line_time_us; + int sr_clock, sr_entries = 0, entries_required; - if (i915_powersave) - fw_blc_self |= FW_BLC_SELF_EN; - else - fw_blc_self &= ~FW_BLC_SELF_EN; - I915_WRITE(FW_BLC_SELF, fw_blc_self); + /* Create copies of the base settings for each pipe */ + planea_params = planeb_params = g4x_wm_info; + + /* Grab a couple of global values before we overwrite them */ + total_size = planea_params.fifo_size; + cacheline_size = planea_params.cacheline_size; + + /* + * Note: we need to make sure we don't overflow for various clock & + * latency values. + * clocks go from a few thousand to several hundred thousand. + * latency is usually a few thousand + */ + entries_required = ((planea_clock / 1000) * pixel_size * latency_ns) / + 1000; + entries_required /= G4X_FIFO_LINE_SIZE; + planea_wm = entries_required + planea_params.guard_size; + + entries_required = ((planeb_clock / 1000) * pixel_size * latency_ns) / + 1000; + entries_required /= G4X_FIFO_LINE_SIZE; + planeb_wm = entries_required + planeb_params.guard_size; + + cursora_wm = cursorb_wm = 16; + cursor_sr = 32; + + DRM_DEBUG("FIFO watermarks - A: %d, B: %d\n", planea_wm, planeb_wm); + + /* Calc sr entries for one plane configs */ + if (sr_hdisplay && (!planea_clock || !planeb_clock)) { + /* self-refresh has much higher latency */ + const static int sr_latency_ns = 12000; + + sr_clock = planea_clock ? planea_clock : planeb_clock; + line_time_us = ((sr_hdisplay * 1000) / sr_clock); + + /* Use ns/us then divide to preserve precision */ + sr_entries = (((sr_latency_ns / line_time_us) + 1) * + pixel_size * sr_hdisplay) / 1000; + sr_entries = roundup(sr_entries / cacheline_size, 1); + DRM_DEBUG("self-refresh entries: %d\n", sr_entries); + I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN); + } + + DRM_DEBUG("Setting FIFO watermarks - A: %d, B: %d, SR %d\n", + planea_wm, planeb_wm, sr_entries); + + planea_wm &= 0x3f; + planeb_wm &= 0x3f; + + I915_WRITE(DSPFW1, (sr_entries << DSPFW_SR_SHIFT) | + (cursorb_wm << DSPFW_CURSORB_SHIFT) | + (planeb_wm << DSPFW_PLANEB_SHIFT) | planea_wm); + I915_WRITE(DSPFW2, (I915_READ(DSPFW2) & DSPFW_CURSORA_MASK) | + (cursora_wm << DSPFW_CURSORA_SHIFT)); + /* HPLL off in SR has some issues on G4x... disable it */ + I915_WRITE(DSPFW3, (I915_READ(DSPFW3) & ~DSPFW_HPLL_SR_EN) | + (cursor_sr << DSPFW_CURSOR_SR_SHIFT)); } static void i965_update_wm(struct drm_device *dev, int unused, int unused2, -- cgit v0.10.2 From 629598da932cfa5ff398fe10bc123282a6f3049e Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Tue, 20 Oct 2009 07:37:32 +0900 Subject: drm/i915: update watermarks before enabling PLLs When coming back from DPMS or turning on a display, make sure we have the watermarks set up before turning on the display plane, otherwise we may get underruns. Signed-off-by: Jesse Barnes Tested-by: Dirk Hohndel Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 47d6ff0..7eed3db 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -1803,6 +1803,8 @@ static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode) case DRM_MODE_DPMS_ON: case DRM_MODE_DPMS_STANDBY: case DRM_MODE_DPMS_SUSPEND: + intel_update_watermarks(dev); + /* Enable the DPLL */ temp = I915_READ(dpll_reg); if ((temp & DPLL_VCO_ENABLE) == 0) { @@ -1840,7 +1842,6 @@ static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode) /* Give the overlay scaler a chance to enable if it's on this pipe */ //intel_crtc_dpms_video(crtc, true); TODO - intel_update_watermarks(dev); break; case DRM_MODE_DPMS_OFF: intel_update_watermarks(dev); -- cgit v0.10.2 From fe798b9718bea5c48938fc38fa78ae9503b8de6c Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Tue, 20 Oct 2009 07:55:28 +0900 Subject: drm/i915: kill warning in intel_find_pll_g4x_dp Initialize clock.vco to silence gcc. Signed-off-by: Jesse Barnes Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 7eed3db..3ba6546b 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -943,6 +943,7 @@ intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc, clock.m = 5 * (clock.m1 + 2) + (clock.m2 + 2); clock.p = (clock.p1 * clock.p2); clock.dot = 96000 * clock.m / (clock.n + 2) / clock.p; + clock.vco = 0; memcpy(best_clock, &clock, sizeof(intel_clock_t)); return true; } -- cgit v0.10.2 From 4204878179c99d419d392d78d817729992b4c442 Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Wed, 21 Oct 2009 15:27:01 +0800 Subject: drm/i915: Ironlake suspend/resume support This adds registers save/restore for Ironlake to make suspend work. Signed-off-by: Guo, Chaohong [zhenyuw: some code re-orgnization, and add more save/restore for FDI link and transcoder registers, also fix palette register for Ironlake] Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index f6a3587..9c67f06 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -296,6 +296,12 @@ typedef struct drm_i915_private { u32 saveVBLANK_A; u32 saveVSYNC_A; u32 saveBCLRPAT_A; + u32 saveTRANS_HTOTAL_A; + u32 saveTRANS_HBLANK_A; + u32 saveTRANS_HSYNC_A; + u32 saveTRANS_VTOTAL_A; + u32 saveTRANS_VBLANK_A; + u32 saveTRANS_VSYNC_A; u32 savePIPEASTAT; u32 saveDSPASTRIDE; u32 saveDSPASIZE; @@ -307,6 +313,8 @@ typedef struct drm_i915_private { u32 saveBLC_HIST_CTL; u32 saveBLC_PWM_CTL; u32 saveBLC_PWM_CTL2; + u32 saveBLC_CPU_PWM_CTL; + u32 saveBLC_CPU_PWM_CTL2; u32 saveFPB0; u32 saveFPB1; u32 saveDPLL_B; @@ -318,6 +326,12 @@ typedef struct drm_i915_private { u32 saveVBLANK_B; u32 saveVSYNC_B; u32 saveBCLRPAT_B; + u32 saveTRANS_HTOTAL_B; + u32 saveTRANS_HBLANK_B; + u32 saveTRANS_HSYNC_B; + u32 saveTRANS_VTOTAL_B; + u32 saveTRANS_VBLANK_B; + u32 saveTRANS_VSYNC_B; u32 savePIPEBSTAT; u32 saveDSPBSTRIDE; u32 saveDSPBSIZE; @@ -351,6 +365,12 @@ typedef struct drm_i915_private { u32 saveIER; u32 saveIIR; u32 saveIMR; + u32 saveDEIER; + u32 saveDEIMR; + u32 saveGTIER; + u32 saveGTIMR; + u32 saveFDI_RXA_IMR; + u32 saveFDI_RXB_IMR; u32 saveCACHE_MODE_0; u32 saveD_STATE; u32 saveDSPCLK_GATE_D; @@ -384,6 +404,16 @@ typedef struct drm_i915_private { u32 savePIPEB_DP_LINK_M; u32 savePIPEA_DP_LINK_N; u32 savePIPEB_DP_LINK_N; + u32 saveFDI_RXA_CTL; + u32 saveFDI_TXA_CTL; + u32 saveFDI_RXB_CTL; + u32 saveFDI_TXB_CTL; + u32 savePFA_CTL_1; + u32 savePFB_CTL_1; + u32 savePFA_WIN_SZ; + u32 savePFB_WIN_SZ; + u32 savePFA_WIN_POS; + u32 savePFB_WIN_POS; struct { struct drm_mm gtt_space; diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index 75c5bed..992d561 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -32,11 +32,15 @@ static bool i915_pipe_enabled(struct drm_device *dev, enum pipe pipe) { struct drm_i915_private *dev_priv = dev->dev_private; + u32 dpll_reg; - if (pipe == PIPE_A) - return (I915_READ(DPLL_A) & DPLL_VCO_ENABLE); - else - return (I915_READ(DPLL_B) & DPLL_VCO_ENABLE); + if (IS_IGDNG(dev)) { + dpll_reg = (pipe == PIPE_A) ? PCH_DPLL_A: PCH_DPLL_B; + } else { + dpll_reg = (pipe == PIPE_A) ? DPLL_A: DPLL_B; + } + + return (I915_READ(dpll_reg) & DPLL_VCO_ENABLE); } static void i915_save_palette(struct drm_device *dev, enum pipe pipe) @@ -49,6 +53,9 @@ static void i915_save_palette(struct drm_device *dev, enum pipe pipe) if (!i915_pipe_enabled(dev, pipe)) return; + if (IS_IGDNG(dev)) + reg = (pipe == PIPE_A) ? LGC_PALETTE_A : LGC_PALETTE_B; + if (pipe == PIPE_A) array = dev_priv->save_palette_a; else @@ -68,6 +75,9 @@ static void i915_restore_palette(struct drm_device *dev, enum pipe pipe) if (!i915_pipe_enabled(dev, pipe)) return; + if (IS_IGDNG(dev)) + reg = (pipe == PIPE_A) ? LGC_PALETTE_A : LGC_PALETTE_B; + if (pipe == PIPE_A) array = dev_priv->save_palette_a; else @@ -232,10 +242,16 @@ static void i915_save_modeset_reg(struct drm_device *dev) /* Pipe & plane A info */ dev_priv->savePIPEACONF = I915_READ(PIPEACONF); dev_priv->savePIPEASRC = I915_READ(PIPEASRC); - dev_priv->saveFPA0 = I915_READ(FPA0); - dev_priv->saveFPA1 = I915_READ(FPA1); - dev_priv->saveDPLL_A = I915_READ(DPLL_A); - if (IS_I965G(dev)) + if (IS_IGDNG(dev)) { + dev_priv->saveFPA0 = I915_READ(PCH_FPA0); + dev_priv->saveFPA1 = I915_READ(PCH_FPA1); + dev_priv->saveDPLL_A = I915_READ(PCH_DPLL_A); + } else { + dev_priv->saveFPA0 = I915_READ(FPA0); + dev_priv->saveFPA1 = I915_READ(FPA1); + dev_priv->saveDPLL_A = I915_READ(DPLL_A); + } + if (IS_I965G(dev) && !IS_IGDNG(dev)) dev_priv->saveDPLL_A_MD = I915_READ(DPLL_A_MD); dev_priv->saveHTOTAL_A = I915_READ(HTOTAL_A); dev_priv->saveHBLANK_A = I915_READ(HBLANK_A); @@ -243,7 +259,24 @@ static void i915_save_modeset_reg(struct drm_device *dev) dev_priv->saveVTOTAL_A = I915_READ(VTOTAL_A); dev_priv->saveVBLANK_A = I915_READ(VBLANK_A); dev_priv->saveVSYNC_A = I915_READ(VSYNC_A); - dev_priv->saveBCLRPAT_A = I915_READ(BCLRPAT_A); + if (!IS_IGDNG(dev)) + dev_priv->saveBCLRPAT_A = I915_READ(BCLRPAT_A); + + if (IS_IGDNG(dev)) { + dev_priv->saveFDI_TXA_CTL = I915_READ(FDI_TXA_CTL); + dev_priv->saveFDI_RXA_CTL = I915_READ(FDI_RXA_CTL); + + dev_priv->savePFA_CTL_1 = I915_READ(PFA_CTL_1); + dev_priv->savePFA_WIN_SZ = I915_READ(PFA_WIN_SZ); + dev_priv->savePFA_WIN_POS = I915_READ(PFA_WIN_POS); + + dev_priv->saveTRANS_HTOTAL_A = I915_READ(TRANS_HTOTAL_A); + dev_priv->saveTRANS_HBLANK_A = I915_READ(TRANS_HBLANK_A); + dev_priv->saveTRANS_HSYNC_A = I915_READ(TRANS_HSYNC_A); + dev_priv->saveTRANS_VTOTAL_A = I915_READ(TRANS_VTOTAL_A); + dev_priv->saveTRANS_VBLANK_A = I915_READ(TRANS_VBLANK_A); + dev_priv->saveTRANS_VSYNC_A = I915_READ(TRANS_VSYNC_A); + } dev_priv->saveDSPACNTR = I915_READ(DSPACNTR); dev_priv->saveDSPASTRIDE = I915_READ(DSPASTRIDE); @@ -260,10 +293,16 @@ static void i915_save_modeset_reg(struct drm_device *dev) /* Pipe & plane B info */ dev_priv->savePIPEBCONF = I915_READ(PIPEBCONF); dev_priv->savePIPEBSRC = I915_READ(PIPEBSRC); - dev_priv->saveFPB0 = I915_READ(FPB0); - dev_priv->saveFPB1 = I915_READ(FPB1); - dev_priv->saveDPLL_B = I915_READ(DPLL_B); - if (IS_I965G(dev)) + if (IS_IGDNG(dev)) { + dev_priv->saveFPB0 = I915_READ(PCH_FPB0); + dev_priv->saveFPB1 = I915_READ(PCH_FPB1); + dev_priv->saveDPLL_B = I915_READ(PCH_DPLL_B); + } else { + dev_priv->saveFPB0 = I915_READ(FPB0); + dev_priv->saveFPB1 = I915_READ(FPB1); + dev_priv->saveDPLL_B = I915_READ(DPLL_B); + } + if (IS_I965G(dev) && !IS_IGDNG(dev)) dev_priv->saveDPLL_B_MD = I915_READ(DPLL_B_MD); dev_priv->saveHTOTAL_B = I915_READ(HTOTAL_B); dev_priv->saveHBLANK_B = I915_READ(HBLANK_B); @@ -271,7 +310,24 @@ static void i915_save_modeset_reg(struct drm_device *dev) dev_priv->saveVTOTAL_B = I915_READ(VTOTAL_B); dev_priv->saveVBLANK_B = I915_READ(VBLANK_B); dev_priv->saveVSYNC_B = I915_READ(VSYNC_B); - dev_priv->saveBCLRPAT_A = I915_READ(BCLRPAT_A); + if (!IS_IGDNG(dev)) + dev_priv->saveBCLRPAT_B = I915_READ(BCLRPAT_B); + + if (IS_IGDNG(dev)) { + dev_priv->saveFDI_TXB_CTL = I915_READ(FDI_TXB_CTL); + dev_priv->saveFDI_RXB_CTL = I915_READ(FDI_RXB_CTL); + + dev_priv->savePFB_CTL_1 = I915_READ(PFB_CTL_1); + dev_priv->savePFB_WIN_SZ = I915_READ(PFB_WIN_SZ); + dev_priv->savePFB_WIN_POS = I915_READ(PFB_WIN_POS); + + dev_priv->saveTRANS_HTOTAL_B = I915_READ(TRANS_HTOTAL_B); + dev_priv->saveTRANS_HBLANK_B = I915_READ(TRANS_HBLANK_B); + dev_priv->saveTRANS_HSYNC_B = I915_READ(TRANS_HSYNC_B); + dev_priv->saveTRANS_VTOTAL_B = I915_READ(TRANS_VTOTAL_B); + dev_priv->saveTRANS_VBLANK_B = I915_READ(TRANS_VBLANK_B); + dev_priv->saveTRANS_VSYNC_B = I915_READ(TRANS_VSYNC_B); + } dev_priv->saveDSPBCNTR = I915_READ(DSPBCNTR); dev_priv->saveDSPBSTRIDE = I915_READ(DSPBSTRIDE); @@ -290,23 +346,41 @@ static void i915_save_modeset_reg(struct drm_device *dev) static void i915_restore_modeset_reg(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; + int dpll_a_reg, fpa0_reg, fpa1_reg; + int dpll_b_reg, fpb0_reg, fpb1_reg; if (drm_core_check_feature(dev, DRIVER_MODESET)) return; + if (IS_IGDNG(dev)) { + dpll_a_reg = PCH_DPLL_A; + dpll_b_reg = PCH_DPLL_B; + fpa0_reg = PCH_FPA0; + fpb0_reg = PCH_FPB0; + fpa1_reg = PCH_FPA1; + fpb1_reg = PCH_FPB1; + } else { + dpll_a_reg = DPLL_A; + dpll_b_reg = DPLL_B; + fpa0_reg = FPA0; + fpb0_reg = FPB0; + fpa1_reg = FPA1; + fpb1_reg = FPB1; + } + /* Pipe & plane A info */ /* Prime the clock */ if (dev_priv->saveDPLL_A & DPLL_VCO_ENABLE) { - I915_WRITE(DPLL_A, dev_priv->saveDPLL_A & + I915_WRITE(dpll_a_reg, dev_priv->saveDPLL_A & ~DPLL_VCO_ENABLE); DRM_UDELAY(150); } - I915_WRITE(FPA0, dev_priv->saveFPA0); - I915_WRITE(FPA1, dev_priv->saveFPA1); + I915_WRITE(fpa0_reg, dev_priv->saveFPA0); + I915_WRITE(fpa1_reg, dev_priv->saveFPA1); /* Actually enable it */ - I915_WRITE(DPLL_A, dev_priv->saveDPLL_A); + I915_WRITE(dpll_a_reg, dev_priv->saveDPLL_A); DRM_UDELAY(150); - if (IS_I965G(dev)) + if (IS_I965G(dev) && !IS_IGDNG(dev)) I915_WRITE(DPLL_A_MD, dev_priv->saveDPLL_A_MD); DRM_UDELAY(150); @@ -317,7 +391,24 @@ static void i915_restore_modeset_reg(struct drm_device *dev) I915_WRITE(VTOTAL_A, dev_priv->saveVTOTAL_A); I915_WRITE(VBLANK_A, dev_priv->saveVBLANK_A); I915_WRITE(VSYNC_A, dev_priv->saveVSYNC_A); - I915_WRITE(BCLRPAT_A, dev_priv->saveBCLRPAT_A); + if (!IS_IGDNG(dev)) + I915_WRITE(BCLRPAT_A, dev_priv->saveBCLRPAT_A); + + if (IS_IGDNG(dev)) { + I915_WRITE(FDI_RXA_CTL, dev_priv->saveFDI_RXA_CTL); + I915_WRITE(FDI_TXA_CTL, dev_priv->saveFDI_TXA_CTL); + + I915_WRITE(PFA_CTL_1, dev_priv->savePFA_CTL_1); + I915_WRITE(PFA_WIN_SZ, dev_priv->savePFA_WIN_SZ); + I915_WRITE(PFA_WIN_POS, dev_priv->savePFA_WIN_POS); + + I915_WRITE(TRANS_HTOTAL_A, dev_priv->saveTRANS_HTOTAL_A); + I915_WRITE(TRANS_HBLANK_A, dev_priv->saveTRANS_HBLANK_A); + I915_WRITE(TRANS_HSYNC_A, dev_priv->saveTRANS_HSYNC_A); + I915_WRITE(TRANS_VTOTAL_A, dev_priv->saveTRANS_VTOTAL_A); + I915_WRITE(TRANS_VBLANK_A, dev_priv->saveTRANS_VBLANK_A); + I915_WRITE(TRANS_VSYNC_A, dev_priv->saveTRANS_VSYNC_A); + } /* Restore plane info */ I915_WRITE(DSPASIZE, dev_priv->saveDSPASIZE); @@ -339,14 +430,14 @@ static void i915_restore_modeset_reg(struct drm_device *dev) /* Pipe & plane B info */ if (dev_priv->saveDPLL_B & DPLL_VCO_ENABLE) { - I915_WRITE(DPLL_B, dev_priv->saveDPLL_B & + I915_WRITE(dpll_b_reg, dev_priv->saveDPLL_B & ~DPLL_VCO_ENABLE); DRM_UDELAY(150); } - I915_WRITE(FPB0, dev_priv->saveFPB0); - I915_WRITE(FPB1, dev_priv->saveFPB1); + I915_WRITE(fpb0_reg, dev_priv->saveFPB0); + I915_WRITE(fpb1_reg, dev_priv->saveFPB1); /* Actually enable it */ - I915_WRITE(DPLL_B, dev_priv->saveDPLL_B); + I915_WRITE(dpll_b_reg, dev_priv->saveDPLL_B); DRM_UDELAY(150); if (IS_I965G(dev)) I915_WRITE(DPLL_B_MD, dev_priv->saveDPLL_B_MD); @@ -359,7 +450,24 @@ static void i915_restore_modeset_reg(struct drm_device *dev) I915_WRITE(VTOTAL_B, dev_priv->saveVTOTAL_B); I915_WRITE(VBLANK_B, dev_priv->saveVBLANK_B); I915_WRITE(VSYNC_B, dev_priv->saveVSYNC_B); - I915_WRITE(BCLRPAT_B, dev_priv->saveBCLRPAT_B); + if (!IS_IGDNG(dev)) + I915_WRITE(BCLRPAT_B, dev_priv->saveBCLRPAT_B); + + if (IS_IGDNG(dev)) { + I915_WRITE(FDI_RXB_CTL, dev_priv->saveFDI_RXB_CTL); + I915_WRITE(FDI_TXB_CTL, dev_priv->saveFDI_TXB_CTL); + + I915_WRITE(PFB_CTL_1, dev_priv->savePFB_CTL_1); + I915_WRITE(PFB_WIN_SZ, dev_priv->savePFB_WIN_SZ); + I915_WRITE(PFB_WIN_POS, dev_priv->savePFB_WIN_POS); + + I915_WRITE(TRANS_HTOTAL_B, dev_priv->saveTRANS_HTOTAL_B); + I915_WRITE(TRANS_HBLANK_B, dev_priv->saveTRANS_HBLANK_B); + I915_WRITE(TRANS_HSYNC_B, dev_priv->saveTRANS_HSYNC_B); + I915_WRITE(TRANS_VTOTAL_B, dev_priv->saveTRANS_VTOTAL_B); + I915_WRITE(TRANS_VBLANK_B, dev_priv->saveTRANS_VBLANK_B); + I915_WRITE(TRANS_VSYNC_B, dev_priv->saveTRANS_VSYNC_B); + } /* Restore plane info */ I915_WRITE(DSPBSIZE, dev_priv->saveDSPBSIZE); @@ -404,22 +512,43 @@ void i915_save_display(struct drm_device *dev) dev_priv->saveCURSIZE = I915_READ(CURSIZE); /* CRT state */ - dev_priv->saveADPA = I915_READ(ADPA); + if (IS_IGDNG(dev)) { + dev_priv->saveADPA = I915_READ(PCH_ADPA); + } else { + dev_priv->saveADPA = I915_READ(ADPA); + } /* LVDS state */ - dev_priv->savePP_CONTROL = I915_READ(PP_CONTROL); - dev_priv->savePFIT_PGM_RATIOS = I915_READ(PFIT_PGM_RATIOS); - dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL); - dev_priv->saveBLC_HIST_CTL = I915_READ(BLC_HIST_CTL); - if (IS_I965G(dev)) - dev_priv->saveBLC_PWM_CTL2 = I915_READ(BLC_PWM_CTL2); - if (IS_MOBILE(dev) && !IS_I830(dev)) - dev_priv->saveLVDS = I915_READ(LVDS); - if (!IS_I830(dev) && !IS_845G(dev)) + if (IS_IGDNG(dev)) { + dev_priv->savePP_CONTROL = I915_READ(PCH_PP_CONTROL); + dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_PCH_CTL1); + dev_priv->saveBLC_PWM_CTL2 = I915_READ(BLC_PWM_PCH_CTL2); + dev_priv->saveBLC_CPU_PWM_CTL = I915_READ(BLC_PWM_CPU_CTL); + dev_priv->saveBLC_CPU_PWM_CTL2 = I915_READ(BLC_PWM_CPU_CTL2); + dev_priv->saveLVDS = I915_READ(PCH_LVDS); + } else { + dev_priv->savePP_CONTROL = I915_READ(PP_CONTROL); + dev_priv->savePFIT_PGM_RATIOS = I915_READ(PFIT_PGM_RATIOS); + dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL); + dev_priv->saveBLC_HIST_CTL = I915_READ(BLC_HIST_CTL); + if (IS_I965G(dev)) + dev_priv->saveBLC_PWM_CTL2 = I915_READ(BLC_PWM_CTL2); + if (IS_MOBILE(dev) && !IS_I830(dev)) + dev_priv->saveLVDS = I915_READ(LVDS); + } + + if (!IS_I830(dev) && !IS_845G(dev) && !IS_IGDNG(dev)) dev_priv->savePFIT_CONTROL = I915_READ(PFIT_CONTROL); - dev_priv->savePP_ON_DELAYS = I915_READ(PP_ON_DELAYS); - dev_priv->savePP_OFF_DELAYS = I915_READ(PP_OFF_DELAYS); - dev_priv->savePP_DIVISOR = I915_READ(PP_DIVISOR); + + if (IS_IGDNG(dev)) { + dev_priv->savePP_ON_DELAYS = I915_READ(PCH_PP_ON_DELAYS); + dev_priv->savePP_OFF_DELAYS = I915_READ(PCH_PP_OFF_DELAYS); + dev_priv->savePP_DIVISOR = I915_READ(PCH_PP_DIVISOR); + } else { + dev_priv->savePP_ON_DELAYS = I915_READ(PP_ON_DELAYS); + dev_priv->savePP_OFF_DELAYS = I915_READ(PP_OFF_DELAYS); + dev_priv->savePP_DIVISOR = I915_READ(PP_DIVISOR); + } /* Display Port state */ if (SUPPORTS_INTEGRATED_DP(dev)) { @@ -451,7 +580,10 @@ void i915_save_display(struct drm_device *dev) dev_priv->saveVGA0 = I915_READ(VGA0); dev_priv->saveVGA1 = I915_READ(VGA1); dev_priv->saveVGA_PD = I915_READ(VGA_PD); - dev_priv->saveVGACNTRL = I915_READ(VGACNTRL); + if (IS_IGDNG(dev)) + dev_priv->saveVGACNTRL = I915_READ(CPU_VGACNTRL); + else + dev_priv->saveVGACNTRL = I915_READ(VGACNTRL); i915_save_vga(dev); } @@ -490,23 +622,41 @@ void i915_restore_display(struct drm_device *dev) I915_WRITE(CURSIZE, dev_priv->saveCURSIZE); /* CRT state */ - I915_WRITE(ADPA, dev_priv->saveADPA); + if (IS_IGDNG(dev)) + I915_WRITE(PCH_ADPA, dev_priv->saveADPA); + else + I915_WRITE(ADPA, dev_priv->saveADPA); /* LVDS state */ - if (IS_I965G(dev)) + if (IS_I965G(dev) && !IS_IGDNG(dev)) I915_WRITE(BLC_PWM_CTL2, dev_priv->saveBLC_PWM_CTL2); - if (IS_MOBILE(dev) && !IS_I830(dev)) + + if (IS_IGDNG(dev)) { + I915_WRITE(PCH_LVDS, dev_priv->saveLVDS); + } else if (IS_MOBILE(dev) && !IS_I830(dev)) I915_WRITE(LVDS, dev_priv->saveLVDS); - if (!IS_I830(dev) && !IS_845G(dev)) + + if (!IS_I830(dev) && !IS_845G(dev) && !IS_IGDNG(dev)) I915_WRITE(PFIT_CONTROL, dev_priv->savePFIT_CONTROL); - I915_WRITE(PFIT_PGM_RATIOS, dev_priv->savePFIT_PGM_RATIOS); - I915_WRITE(BLC_PWM_CTL, dev_priv->saveBLC_PWM_CTL); - I915_WRITE(BLC_HIST_CTL, dev_priv->saveBLC_HIST_CTL); - I915_WRITE(PP_ON_DELAYS, dev_priv->savePP_ON_DELAYS); - I915_WRITE(PP_OFF_DELAYS, dev_priv->savePP_OFF_DELAYS); - I915_WRITE(PP_DIVISOR, dev_priv->savePP_DIVISOR); - I915_WRITE(PP_CONTROL, dev_priv->savePP_CONTROL); + if (IS_IGDNG(dev)) { + I915_WRITE(BLC_PWM_PCH_CTL1, dev_priv->saveBLC_PWM_CTL); + I915_WRITE(BLC_PWM_PCH_CTL2, dev_priv->saveBLC_PWM_CTL2); + I915_WRITE(BLC_PWM_CPU_CTL, dev_priv->saveBLC_CPU_PWM_CTL); + I915_WRITE(BLC_PWM_CPU_CTL2, dev_priv->saveBLC_CPU_PWM_CTL2); + I915_WRITE(PCH_PP_ON_DELAYS, dev_priv->savePP_ON_DELAYS); + I915_WRITE(PCH_PP_OFF_DELAYS, dev_priv->savePP_OFF_DELAYS); + I915_WRITE(PCH_PP_DIVISOR, dev_priv->savePP_DIVISOR); + I915_WRITE(PCH_PP_CONTROL, dev_priv->savePP_CONTROL); + } else { + I915_WRITE(PFIT_PGM_RATIOS, dev_priv->savePFIT_PGM_RATIOS); + I915_WRITE(BLC_PWM_CTL, dev_priv->saveBLC_PWM_CTL); + I915_WRITE(BLC_HIST_CTL, dev_priv->saveBLC_HIST_CTL); + I915_WRITE(PP_ON_DELAYS, dev_priv->savePP_ON_DELAYS); + I915_WRITE(PP_OFF_DELAYS, dev_priv->savePP_OFF_DELAYS); + I915_WRITE(PP_DIVISOR, dev_priv->savePP_DIVISOR); + I915_WRITE(PP_CONTROL, dev_priv->savePP_CONTROL); + } /* Display Port state */ if (SUPPORTS_INTEGRATED_DP(dev)) { @@ -529,7 +679,10 @@ void i915_restore_display(struct drm_device *dev) } /* VGA state */ - I915_WRITE(VGACNTRL, dev_priv->saveVGACNTRL); + if (IS_IGDNG(dev)) + I915_WRITE(CPU_VGACNTRL, dev_priv->saveVGACNTRL); + else + I915_WRITE(VGACNTRL, dev_priv->saveVGACNTRL); I915_WRITE(VGA0, dev_priv->saveVGA0); I915_WRITE(VGA1, dev_priv->saveVGA1); I915_WRITE(VGA_PD, dev_priv->saveVGA_PD); @@ -555,8 +708,17 @@ int i915_save_state(struct drm_device *dev) i915_save_display(dev); /* Interrupt state */ - dev_priv->saveIER = I915_READ(IER); - dev_priv->saveIMR = I915_READ(IMR); + if (IS_IGDNG(dev)) { + dev_priv->saveDEIER = I915_READ(DEIER); + dev_priv->saveDEIMR = I915_READ(DEIMR); + dev_priv->saveGTIER = I915_READ(GTIER); + dev_priv->saveGTIMR = I915_READ(GTIMR); + dev_priv->saveFDI_RXA_IMR = I915_READ(FDI_RXA_IMR); + dev_priv->saveFDI_RXB_IMR = I915_READ(FDI_RXB_IMR); + } else { + dev_priv->saveIER = I915_READ(IER); + dev_priv->saveIMR = I915_READ(IMR); + } /* Clock gating state */ dev_priv->saveD_STATE = I915_READ(D_STATE); @@ -621,8 +783,17 @@ int i915_restore_state(struct drm_device *dev) i915_restore_display(dev); /* Interrupt state */ - I915_WRITE (IER, dev_priv->saveIER); - I915_WRITE (IMR, dev_priv->saveIMR); + if (IS_IGDNG(dev)) { + I915_WRITE(DEIER, dev_priv->saveDEIER); + I915_WRITE(DEIMR, dev_priv->saveDEIMR); + I915_WRITE(GTIER, dev_priv->saveGTIER); + I915_WRITE(GTIMR, dev_priv->saveGTIMR); + I915_WRITE(FDI_RXA_IMR, dev_priv->saveFDI_RXA_IMR); + I915_WRITE(FDI_RXB_IMR, dev_priv->saveFDI_RXB_IMR); + } else { + I915_WRITE (IER, dev_priv->saveIER); + I915_WRITE (IMR, dev_priv->saveIMR); + } /* Clock gating state */ I915_WRITE (D_STATE, dev_priv->saveD_STATE); -- cgit v0.10.2 From f685ceacab07d3f6c236f04803e2f2f0dbcc5afb Mon Sep 17 00:00:00 2001 From: Mike Galbraith Date: Fri, 23 Oct 2009 23:09:22 +0200 Subject: sched: Strengthen buddies and mitigate buddy induced latencies This patch restores the effectiveness of LAST_BUDDY in preventing pgsql+oltp from collapsing due to wakeup preemption. It also switches LAST_BUDDY to exclusively do what it does best, namely mitigate the effects of aggressive wakeup preemption, which improves vmark throughput markedly, and restores mysql+oltp scalability. Since buddies are about scalability, enable them beginning at the point where we begin expanding sched_latency, namely sched_nr_latency. Previously, buddies were cleared aggressively, which seriously reduced their effectiveness. Not clearing aggressively however, produces a small drop in mysql+oltp throughput immediately after peak, indicating that LAST_BUDDY is actually doing some harm. This is right at the point where X on the desktop in competition with another load wants low latency service. Ergo, do not enable until we need to scale. To mitigate latency induced by buddies, or by a task just missing wakeup preemption, check latency at tick time. Last hunk prevents buddies from stymieing BALANCE_NEWIDLE via CACHE_HOT_BUDDY. Supporting performance tests: tip = v2.6.32-rc5-1497-ga525b32 tipx = NO_GENTLE_FAIR_SLEEPERS NEXT_BUDDY granularity knobs = 31 knobs + 31 buddies tip+x = NO_GENTLE_FAIR_SLEEPERS granularity knobs = 31 knobs (Three run averages except where noted.) vmark: ------ tip 108466 messages per second tip+ 125307 messages per second tip+x 125335 messages per second tipx 117781 messages per second 2.6.31.3 122729 messages per second mysql+oltp: ----------- clients 1 2 4 8 16 32 64 128 256 .......................................................................................... tip 9949.89 18690.20 34801.24 34460.04 32682.88 30765.97 28305.27 25059.64 19548.08 tip+ 10013.90 18526.84 34900.38 34420.14 33069.83 32083.40 30578.30 28010.71 25605.47 tipx 9698.71 18002.70 34477.56 33420.01 32634.30 31657.27 29932.67 26827.52 21487.18 2.6.31.3 8243.11 18784.20 34404.83 33148.38 31900.32 31161.90 29663.81 25995.94 18058.86 pgsql+oltp: ----------- clients 1 2 4 8 16 32 64 128 256 .......................................................................................... tip 13686.37 26609.25 51934.28 51347.81 49479.51 45312.65 36691.91 26851.57 24145.35 tip+ (1x) 13907.85 27135.87 52951.98 52514.04 51742.52 50705.43 49947.97 48374.19 46227.94 tip+x 13906.78 27065.81 52951.19 52542.59 52176.11 51815.94 50838.90 49439.46 46891.00 tipx 13742.46 26769.81 52351.99 51891.73 51320.79 50938.98 50248.65 48908.70 46553.84 2.6.31.3 13815.35 26906.46 52683.34 52061.31 51937.10 51376.80 50474.28 49394.47 47003.25 Signed-off-by: Mike Galbraith Cc: Peter Zijlstra LKML-Reference: Signed-off-by: Ingo Molnar diff --git a/kernel/sched.c b/kernel/sched.c index 789001d..cae6700 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -2008,7 +2008,7 @@ task_hot(struct task_struct *p, u64 now, struct sched_domain *sd) /* * Buddy candidates are cache hot: */ - if (sched_feat(CACHE_HOT_BUDDY) && + if (sched_feat(CACHE_HOT_BUDDY) && this_rq()->nr_running && (&p->se == cfs_rq_of(&p->se)->next || &p->se == cfs_rq_of(&p->se)->last)) return 1; diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index c32c3e6..37087a7 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -822,6 +822,26 @@ check_preempt_tick(struct cfs_rq *cfs_rq, struct sched_entity *curr) * re-elected due to buddy favours. */ clear_buddies(cfs_rq, curr); + return; + } + + /* + * Ensure that a task that missed wakeup preemption by a + * narrow margin doesn't have to wait for a full slice. + * This also mitigates buddy induced latencies under load. + */ + if (!sched_feat(WAKEUP_PREEMPT)) + return; + + if (delta_exec < sysctl_sched_min_granularity) + return; + + if (cfs_rq->nr_running > 1) { + struct sched_entity *se = __pick_next_entity(cfs_rq); + s64 delta = curr->vruntime - se->vruntime; + + if (delta > ideal_runtime) + resched_task(rq_of(cfs_rq)->curr); } } @@ -861,21 +881,18 @@ wakeup_preempt_entity(struct sched_entity *curr, struct sched_entity *se); static struct sched_entity *pick_next_entity(struct cfs_rq *cfs_rq) { struct sched_entity *se = __pick_next_entity(cfs_rq); - struct sched_entity *buddy; + struct sched_entity *left = se; - if (cfs_rq->next) { - buddy = cfs_rq->next; - cfs_rq->next = NULL; - if (wakeup_preempt_entity(buddy, se) < 1) - return buddy; - } + if (cfs_rq->next && wakeup_preempt_entity(cfs_rq->next, left) < 1) + se = cfs_rq->next; - if (cfs_rq->last) { - buddy = cfs_rq->last; - cfs_rq->last = NULL; - if (wakeup_preempt_entity(buddy, se) < 1) - return buddy; - } + /* + * Prefer last buddy, try to return the CPU to a preempted task. + */ + if (cfs_rq->last && wakeup_preempt_entity(cfs_rq->last, left) < 1) + se = cfs_rq->last; + + clear_buddies(cfs_rq, se); return se; } @@ -1577,6 +1594,7 @@ static void check_preempt_wakeup(struct rq *rq, struct task_struct *p, int wake_ struct sched_entity *se = &curr->se, *pse = &p->se; struct cfs_rq *cfs_rq = task_cfs_rq(curr); int sync = wake_flags & WF_SYNC; + int scale = cfs_rq->nr_running >= sched_nr_latency; update_curr(cfs_rq); @@ -1591,18 +1609,7 @@ static void check_preempt_wakeup(struct rq *rq, struct task_struct *p, int wake_ if (unlikely(se == pse)) return; - /* - * Only set the backward buddy when the current task is still on the - * rq. This can happen when a wakeup gets interleaved with schedule on - * the ->pre_schedule() or idle_balance() point, either of which can - * drop the rq lock. - * - * Also, during early boot the idle thread is in the fair class, for - * obvious reasons its a bad idea to schedule back to the idle thread. - */ - if (sched_feat(LAST_BUDDY) && likely(se->on_rq && curr != rq->idle)) - set_last_buddy(se); - if (sched_feat(NEXT_BUDDY) && !(wake_flags & WF_FORK)) + if (sched_feat(NEXT_BUDDY) && scale && !(wake_flags & WF_FORK)) set_next_buddy(pse); /* @@ -1648,8 +1655,22 @@ static void check_preempt_wakeup(struct rq *rq, struct task_struct *p, int wake_ BUG_ON(!pse); - if (wakeup_preempt_entity(se, pse) == 1) + if (wakeup_preempt_entity(se, pse) == 1) { resched_task(curr); + /* + * Only set the backward buddy when the current task is still + * on the rq. This can happen when a wakeup gets interleaved + * with schedule on the ->pre_schedule() or idle_balance() + * point, either of which can * drop the rq lock. + * + * Also, during early boot the idle thread is in the fair class, + * for obvious reasons its a bad idea to schedule back to it. + */ + if (unlikely(!se->on_rq || curr == rq->idle)) + return; + if (sched_feat(LAST_BUDDY) && scale && entity_is_task(se)) + set_last_buddy(se); + } } static struct task_struct *pick_next_task_fair(struct rq *rq) -- cgit v0.10.2 From cf8517cf905b5cd31d5790250b9ac39f7cb8aa53 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Fri, 23 Oct 2009 19:36:16 -0400 Subject: tracing: Update *ppos instead of filp->f_pos Instead of directly updating filp->f_pos we should update the *ppos argument. The filp->f_pos gets updated within the file_pos_write() function called from sys_write(). Signed-off-by: Jiri Olsa Signed-off-by: Steven Rostedt Cc: Frederic Weisbecker LKML-Reference: <20091023233646.399670810@goodmis.org> Signed-off-by: Ingo Molnar diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 37ba67e..9c451a1 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -740,7 +740,7 @@ ftrace_profile_write(struct file *filp, const char __user *ubuf, out: mutex_unlock(&ftrace_profile_lock); - filp->f_pos += cnt; + *ppos += cnt; return cnt; } diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index c820b03..b20d3ec 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -2440,7 +2440,7 @@ tracing_trace_options_write(struct file *filp, const char __user *ubuf, return ret; } - filp->f_pos += cnt; + *ppos += cnt; return cnt; } @@ -2582,7 +2582,7 @@ tracing_ctrl_write(struct file *filp, const char __user *ubuf, } mutex_unlock(&trace_types_lock); - filp->f_pos += cnt; + *ppos += cnt; return cnt; } @@ -2764,7 +2764,7 @@ tracing_set_trace_write(struct file *filp, const char __user *ubuf, if (err) return err; - filp->f_pos += ret; + *ppos += ret; return ret; } @@ -3299,7 +3299,7 @@ tracing_entries_write(struct file *filp, const char __user *ubuf, } } - filp->f_pos += cnt; + *ppos += cnt; /* If check pages failed, return ENOMEM */ if (tracing_disabled) -- cgit v0.10.2 From 3e69533b51930a7169235db2caf703884e6e3bbb Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Fri, 23 Oct 2009 19:36:17 -0400 Subject: tracing: Fix trace_seq_printf() return value trace_seq_printf() return value is a little ambiguous. It currently returns the length of the space available in the buffer. printf usually returns the amount written. This is not adequate here, because: trace_seq_printf(s, ""); is perfectly legal, and returning 0 would indicate that it failed. We can always see the amount written by looking at the before and after values of s->len. This is not quite the same use as printf. We only care if the string was successfully written to the buffer or not. Make trace_seq_printf() return 0 if the trace oversizes the buffer's free space, 1 otherwise. Signed-off-by: Jiri Olsa Signed-off-by: Steven Rostedt Cc: Frederic Weisbecker LKML-Reference: <20091023233646.631787612@goodmis.org> Signed-off-by: Ingo Molnar diff --git a/kernel/trace/trace_output.c b/kernel/trace/trace_output.c index ed17565..b6c12c6 100644 --- a/kernel/trace/trace_output.c +++ b/kernel/trace/trace_output.c @@ -69,6 +69,9 @@ enum print_line_t trace_print_printk_msg_only(struct trace_iterator *iter) * @s: trace sequence descriptor * @fmt: printf format string * + * It returns 0 if the trace oversizes the buffer's free + * space, 1 otherwise. + * * The tracer may use either sequence operations or its own * copy to user routines. To simplify formating of a trace * trace_seq_printf is used to store strings into a special @@ -95,7 +98,7 @@ trace_seq_printf(struct trace_seq *s, const char *fmt, ...) s->len += ret; - return len; + return 1; } EXPORT_SYMBOL_GPL(trace_seq_printf); -- cgit v0.10.2 From 67b394f7f26d84edb7294cc6528ab7ca6daa2ad1 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Fri, 23 Oct 2009 19:36:18 -0400 Subject: tracing: Fix comment typo and documentation example Trivial patch to fix a documentation example and to fix a comment. Signed-off-by: Jiri Olsa Signed-off-by: Steven Rostedt Cc: Frederic Weisbecker LKML-Reference: <20091023233646.871719877@goodmis.org> Signed-off-by: Ingo Molnar diff --git a/Documentation/trace/ftrace.txt b/Documentation/trace/ftrace.txt index 957b22f..8179692 100644 --- a/Documentation/trace/ftrace.txt +++ b/Documentation/trace/ftrace.txt @@ -1231,6 +1231,7 @@ something like this simple program: #include #include #include +#include #define _STR(x) #x #define STR(x) _STR(x) @@ -1265,6 +1266,7 @@ const char *find_debugfs(void) return NULL; } + strcat(debugfs, "/tracing/"); debugfs_found = 1; return debugfs; diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index d4ff019..217f699 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -2681,7 +2681,7 @@ unsigned long ring_buffer_entries(struct ring_buffer *buffer) EXPORT_SYMBOL_GPL(ring_buffer_entries); /** - * ring_buffer_overrun_cpu - get the number of overruns in buffer + * ring_buffer_overruns - get the number of overruns in buffer * @buffer: The ring buffer * * Returns the total number of overruns in the ring buffer -- cgit v0.10.2 From 6d3f1e12f46a2f9a1bb7e7aa433df8dd31ce5647 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Fri, 23 Oct 2009 19:36:19 -0400 Subject: tracing: Remove cpu arg from the rb_time_stamp() function The cpu argument is not used inside the rb_time_stamp() function. Plus fix a typo. Signed-off-by: Jiri Olsa Signed-off-by: Steven Rostedt Cc: Frederic Weisbecker LKML-Reference: <20091023233647.118547500@goodmis.org> Signed-off-by: Ingo Molnar diff --git a/include/linux/trace_seq.h b/include/linux/trace_seq.h index c134dd1..09077f6 100644 --- a/include/linux/trace_seq.h +++ b/include/linux/trace_seq.h @@ -7,7 +7,7 @@ /* * Trace sequences are used to allow a function to call several other functions - * to create a string of data to use (up to a max of PAGE_SIZE. + * to create a string of data to use (up to a max of PAGE_SIZE). */ struct trace_seq { diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index 217f699..3ffa502 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -483,7 +483,7 @@ struct ring_buffer_iter { /* Up this if you want to test the TIME_EXTENTS and normalization */ #define DEBUG_SHIFT 0 -static inline u64 rb_time_stamp(struct ring_buffer *buffer, int cpu) +static inline u64 rb_time_stamp(struct ring_buffer *buffer) { /* shift to debug/test normalization and TIME_EXTENTS */ return buffer->clock() << DEBUG_SHIFT; @@ -494,7 +494,7 @@ u64 ring_buffer_time_stamp(struct ring_buffer *buffer, int cpu) u64 time; preempt_disable_notrace(); - time = rb_time_stamp(buffer, cpu); + time = rb_time_stamp(buffer); preempt_enable_no_resched_notrace(); return time; @@ -599,7 +599,7 @@ static struct list_head *rb_list_head(struct list_head *list) } /* - * rb_is_head_page - test if the give page is the head page + * rb_is_head_page - test if the given page is the head page * * Because the reader may move the head_page pointer, we can * not trust what the head page is (it may be pointing to @@ -1868,7 +1868,7 @@ rb_move_tail(struct ring_buffer_per_cpu *cpu_buffer, * Nested commits always have zero deltas, so * just reread the time stamp */ - *ts = rb_time_stamp(buffer, cpu_buffer->cpu); + *ts = rb_time_stamp(buffer); next_page->page->time_stamp = *ts; } @@ -2111,7 +2111,7 @@ rb_reserve_next_event(struct ring_buffer *buffer, if (RB_WARN_ON(cpu_buffer, ++nr_loops > 1000)) goto out_fail; - ts = rb_time_stamp(cpu_buffer->buffer, cpu_buffer->cpu); + ts = rb_time_stamp(cpu_buffer->buffer); /* * Only the first commit can update the timestamp. -- cgit v0.10.2 From ab72b00734ae4d0b5ff273a0f6c7abeaa3713c76 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 25 Oct 2009 15:39:37 +0000 Subject: ARM: Fix signal restart issues with NX and OABI compat The signal restarting code was placed on the user stack when OABI compatibility is enabled. Unfortunately, with an EABI NX executable, this results in an attempt to run code from the non-executable stack, which segfaults the application. Fix this by placing the code in the vectors page, along side the signal return code, and directing the application to that code. Reported-by: saeed bishara Tested-by: saeed bishara Signed-off-by: Russell King diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 1423a34..2a573d4 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -1,7 +1,7 @@ /* * linux/arch/arm/kernel/signal.c * - * Copyright (C) 1995-2002 Russell King + * Copyright (C) 1995-2009 Russell King * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -29,6 +29,7 @@ */ #define SWI_SYS_SIGRETURN (0xef000000|(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE)) #define SWI_SYS_RT_SIGRETURN (0xef000000|(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE)) +#define SWI_SYS_RESTART (0xef000000|__NR_restart_syscall|__NR_OABI_SYSCALL_BASE) /* * With EABI, the syscall number has to be loaded into r7. @@ -49,6 +50,18 @@ const unsigned long sigreturn_codes[7] = { }; /* + * Either we support OABI only, or we have EABI with the OABI + * compat layer enabled. In the later case we don't know if + * user space is EABI or not, and if not we must not clobber r7. + * Always using the OABI syscall solves that issue and works for + * all those cases. + */ +const unsigned long syscall_restart_code[2] = { + SWI_SYS_RESTART, /* swi __NR_restart_syscall */ + 0xe49df004, /* ldr pc, [sp], #4 */ +}; + +/* * atomically swap in the new signal mask, and wait for a signal. */ asmlinkage int sys_sigsuspend(int restart, unsigned long oldmask, old_sigset_t mask) @@ -645,32 +658,12 @@ static void do_signal(struct pt_regs *regs, int syscall) regs->ARM_pc -= 4; #else u32 __user *usp; - u32 swival = __NR_restart_syscall; - regs->ARM_sp -= 12; + regs->ARM_sp -= 4; usp = (u32 __user *)regs->ARM_sp; - /* - * Either we supports OABI only, or we have - * EABI with the OABI compat layer enabled. - * In the later case we don't know if user - * space is EABI or not, and if not we must - * not clobber r7. Always using the OABI - * syscall solves that issue and works for - * all those cases. - */ - swival = swival - __NR_SYSCALL_BASE + __NR_OABI_SYSCALL_BASE; - - put_user(regs->ARM_pc, &usp[0]); - /* swi __NR_restart_syscall */ - put_user(0xef000000 | swival, &usp[1]); - /* ldr pc, [sp], #12 */ - put_user(0xe49df00c, &usp[2]); - - flush_icache_range((unsigned long)usp, - (unsigned long)(usp + 3)); - - regs->ARM_pc = regs->ARM_sp + 4; + put_user(regs->ARM_pc, usp); + regs->ARM_pc = KERN_RESTART_CODE; #endif } } diff --git a/arch/arm/kernel/signal.h b/arch/arm/kernel/signal.h index 27beece..6fcfe83 100644 --- a/arch/arm/kernel/signal.h +++ b/arch/arm/kernel/signal.h @@ -1,12 +1,14 @@ /* * linux/arch/arm/kernel/signal.h * - * Copyright (C) 2005 Russell King. + * Copyright (C) 2005-2009 Russell King. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #define KERN_SIGRETURN_CODE (CONFIG_VECTORS_BASE + 0x00000500) +#define KERN_RESTART_CODE (KERN_SIGRETURN_CODE + sizeof(sigreturn_codes)) extern const unsigned long sigreturn_codes[7]; +extern const unsigned long syscall_restart_code[2]; diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index f838f36..95718a6 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -1,7 +1,7 @@ /* * linux/arch/arm/kernel/traps.c * - * Copyright (C) 1995-2002 Russell King + * Copyright (C) 1995-2009 Russell King * Fragments that appear the same as linux/arch/i386/kernel/traps.c (C) Linus Torvalds * * This program is free software; you can redistribute it and/or modify @@ -751,6 +751,8 @@ void __init early_trap_init(void) */ memcpy((void *)KERN_SIGRETURN_CODE, sigreturn_codes, sizeof(sigreturn_codes)); + memcpy((void *)KERN_RESTART_CODE, syscall_restart_code, + sizeof(syscall_restart_code)); flush_icache_range(vectors, vectors + PAGE_SIZE); modify_domain(DOMAIN_USER, DOMAIN_CLIENT); -- cgit v0.10.2 From 84087126d50400789b44459cfc45721778e6ebb0 Mon Sep 17 00:00:00 2001 From: Marti Raudsepp Date: Sat, 24 Oct 2009 19:10:36 +0300 Subject: perf tools: Fix compatibility with libelf 0.8 and autodetect The Makefile now automatically defines LIBELF_NO_MMAP when libelf 0.8.x is detected. libelf 0.8 is still maintained and some distributions such as Arch Linux use it instead of elfutils. Signed-off-by: Marti Raudsepp Cc: Lucas De Marchi Cc: Peter Zijlstra Cc: Paul Mackerras Cc: Frederic Weisbecker Cc: Arnaldo Carvalho de Melo Cc: Arjan van de Ven Cc: Mike Galbraith LKML-Reference: <1256400636.3007.16.camel@newn> Signed-off-by: Ingo Molnar diff --git a/tools/perf/Makefile b/tools/perf/Makefile index 742a32e..46e877b 100644 --- a/tools/perf/Makefile +++ b/tools/perf/Makefile @@ -422,7 +422,11 @@ ifeq ($(uname_S),Darwin) PTHREAD_LIBS = endif -ifneq ($(shell sh -c "(echo '\#include '; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ_MMAP, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o /dev/null $(ALL_LDFLAGS) > /dev/null 2>&1 && echo y"), y) +ifeq ($(shell sh -c "(echo '\#include '; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o /dev/null $(ALL_LDFLAGS) > /dev/null 2>&1 && echo y"), y) + ifneq ($(shell sh -c "(echo '\#include '; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ_MMAP, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o /dev/null $(ALL_LDFLAGS) > /dev/null 2>&1 && echo y"), y) + BASIC_CFLAGS += -DLIBELF_NO_MMAP + endif +else msg := $(error No libelf.h/libelf found, please install libelf-dev/elfutils-libelf-devel and glibc-dev[el]); endif diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c index 47ea060..226f44a 100644 --- a/tools/perf/util/symbol.c +++ b/tools/perf/util/symbol.c @@ -413,7 +413,7 @@ static int dso__synthesize_plt_symbols(struct dso *self, int v) if (fd < 0) goto out; - elf = elf_begin(fd, ELF_C_READ_MMAP, NULL); + elf = elf_begin(fd, PERF_ELF_C_READ_MMAP, NULL); if (elf == NULL) goto out_close; @@ -533,7 +533,7 @@ static int dso__load_sym(struct dso *self, int fd, const char *name, Elf *elf; int nr = 0, kernel = !strcmp("[kernel]", self->name); - elf = elf_begin(fd, ELF_C_READ_MMAP, NULL); + elf = elf_begin(fd, PERF_ELF_C_READ_MMAP, NULL); if (elf == NULL) { if (v) fprintf(stderr, "%s: cannot read %s ELF file.\n", @@ -675,7 +675,7 @@ static char *dso__read_build_id(struct dso *self, int v) if (fd < 0) goto out; - elf = elf_begin(fd, ELF_C_READ_MMAP, NULL); + elf = elf_begin(fd, PERF_ELF_C_READ_MMAP, NULL); if (elf == NULL) { if (v) fprintf(stderr, "%s: cannot read %s ELF file.\n", diff --git a/tools/perf/util/symbol.h b/tools/perf/util/symbol.h index 6e84907..829da9e 100644 --- a/tools/perf/util/symbol.h +++ b/tools/perf/util/symbol.h @@ -27,6 +27,16 @@ static inline char *bfd_demangle(void __used *v, const char __used *c, #endif #endif +/* + * libelf 0.8.x and earlier do not support ELF_C_READ_MMAP; + * for newer versions we can use mmap to reduce memory usage: + */ +#ifdef LIBELF_NO_MMAP +# define PERF_ELF_C_READ_MMAP ELF_C_READ +#else +# define PERF_ELF_C_READ_MMAP ELF_C_READ_MMAP +#endif + #ifndef DMGL_PARAMS #define DMGL_PARAMS (1 << 0) /* Include function args */ #define DMGL_ANSI (1 << 1) /* Include const, volatile, etc */ -- cgit v0.10.2 From b214f11fb92713fbb07d8c1f62dd1aa8077b56c9 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Sat, 24 Oct 2009 00:06:48 +0200 Subject: ASoC: Amstrad Delta: add info about the line discipline requirement to Kconfig help text I thought it could be usefull to add some information on how to get the device fully supported by loading a line discipline on the modem line. Signed-off-by: Janusz Krzysztofik Signed-off-by: Mark Brown diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig index 2dee983..653a362 100644 --- a/sound/soc/omap/Kconfig +++ b/sound/soc/omap/Kconfig @@ -21,7 +21,18 @@ config SND_OMAP_SOC_AMS_DELTA select SND_OMAP_SOC_MCBSP select SND_SOC_CX20442 help - Say Y if you want to add support for SoC audio on Amstrad Delta. + Say Y if you want to add support for SoC audio device connected to + a handset and a speakerphone found on Amstrad E3 (Delta) videophone. + + Note that in order to get those devices fully supported, you have to + build the kernel with standard serial port driver included and + configured for at least 4 ports. Then, from userspace, you must load + a line discipline #19 on the modem (ttyS3) serial line. The simplest + way to achieve this is to install util-linux-ng and use the included + ldattach utility. This can be started automatically from udev, + a simple rule like this one should do the trick (it does for me): + ACTION=="add", KERNEL=="controlC0", \ + RUN+="/usr/sbin/ldattach 19 /dev/ttyS3" config SND_OMAP_SOC_OSK5912 tristate "SoC Audio support for omap osk5912" -- cgit v0.10.2 From ce63e6bd0ac7eca242562ee07f518bacc8eaa5ce Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 25 Oct 2009 22:42:38 +0000 Subject: ARM: integrator: allow Integrator to be built with highmem This fixes Integrator builds with highmem enabled; we need to translate from 'struct page' to a DMA address, and this is not possible without __pfn_to_bus(). Signed-off-by: Russell King diff --git a/arch/arm/mach-integrator/include/mach/memory.h b/arch/arm/mach-integrator/include/mach/memory.h index 2b2e7a1..4891828 100644 --- a/arch/arm/mach-integrator/include/mach/memory.h +++ b/arch/arm/mach-integrator/include/mach/memory.h @@ -28,5 +28,6 @@ #define BUS_OFFSET UL(0x80000000) #define __virt_to_bus(x) ((x) - PAGE_OFFSET + BUS_OFFSET) #define __bus_to_virt(x) ((x) - BUS_OFFSET + PAGE_OFFSET) +#define __pfn_to_bus(x) (((x) << PAGE_SHIFT) + BUS_OFFSET) #endif -- cgit v0.10.2 From c06e004c72aa0d1acbc239fb995aa3d823543a8a Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 25 Oct 2009 22:36:10 +0000 Subject: ARM: Use GFP_DMA only for masks _less_ than 32-bit We were using GFP_DMA for masks other than 0xffffffff, which is wrong when some masks are initialized to 0xffffffffffffffff. This caused such masks to obtain memory from the precious DMA pool. Signed-off-by: Russell King diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index b30925f..b9590a7 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -205,7 +205,7 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, order = get_order(size); - if (mask != 0xffffffff) + if (mask < 0xffffffffULL) gfp |= GFP_DMA; page = alloc_pages(gfp, order); @@ -289,7 +289,7 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, if (!mask) goto error; - if (mask != 0xffffffff) + if (mask < 0xffffffffULL) gfp |= GFP_DMA; virt = kmalloc(size, gfp); if (!virt) -- cgit v0.10.2 From c850cb782626fda78e5e9e5baf18a5bd806a225c Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 23 Oct 2009 18:49:03 +1000 Subject: drm/kms: fix kms/fbdev colormap support properly. This sets the fbcon to use TRUECOLOR by default, it then only modifies the pseudo palette for fbcon, and only touches the real palette when in 8-bit pseudo color mode. Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index 23dc9c1..9c92461 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -454,22 +454,39 @@ out_free: } EXPORT_SYMBOL(drm_fb_helper_init_crtc_count); -static void setcolreg(struct drm_crtc *crtc, u16 red, u16 green, +static int setcolreg(struct drm_crtc *crtc, u16 red, u16 green, u16 blue, u16 regno, struct fb_info *info) { struct drm_fb_helper *fb_helper = info->par; struct drm_framebuffer *fb = fb_helper->fb; int pindex; + if (info->fix.visual == FB_VISUAL_TRUECOLOR) { + u32 *palette; + u32 value; + /* place color in psuedopalette */ + if (regno > 16) + return -EINVAL; + palette = (u32 *)info->pseudo_palette; + red >>= (16 - info->var.red.length); + green >>= (16 - info->var.green.length); + blue >>= (16 - info->var.blue.length); + value = (red << info->var.red.offset) | + (green << info->var.green.offset) | + (blue << info->var.blue.offset); + palette[regno] = value; + return 0; + } + pindex = regno; if (fb->bits_per_pixel == 16) { pindex = regno << 3; if (fb->depth == 16 && regno > 63) - return; + return -EINVAL; if (fb->depth == 15 && regno > 31) - return; + return -EINVAL; if (fb->depth == 16) { u16 r, g, b; @@ -493,13 +510,7 @@ static void setcolreg(struct drm_crtc *crtc, u16 red, u16 green, if (fb->depth != 16) fb_helper->funcs->gamma_set(crtc, red, green, blue, pindex); - - if (regno < 16 && info->fix.visual == FB_VISUAL_DIRECTCOLOR) { - ((u32 *) fb->pseudo_palette)[regno] = - (regno << info->var.red.offset) | - (regno << info->var.green.offset) | - (regno << info->var.blue.offset); - } + return 0; } int drm_fb_helper_setcmap(struct fb_cmap *cmap, struct fb_info *info) @@ -536,7 +547,9 @@ int drm_fb_helper_setcmap(struct fb_cmap *cmap, struct fb_info *info) if (transp) htransp = *transp++; - setcolreg(crtc, hred, hgreen, hblue, start++, info); + rc = setcolreg(crtc, hred, hgreen, hblue, start++, info); + if (rc) + return rc; } crtc_funcs->load_lut(crtc); } @@ -555,6 +568,7 @@ int drm_fb_helper_setcolreg(unsigned regno, struct drm_device *dev = fb_helper->dev; struct drm_crtc *crtc; int i; + int ret; if (regno > 255) return 1; @@ -568,8 +582,10 @@ int drm_fb_helper_setcolreg(unsigned regno, if (i == fb_helper->crtc_count) continue; + ret = setcolreg(crtc, red, green, blue, regno, info); + if (ret) + return ret; - setcolreg(crtc, red, green, blue, regno, info); crtc_funcs->load_lut(crtc); } return 0; @@ -928,7 +944,7 @@ void drm_fb_helper_fill_fix(struct fb_info *info, uint32_t pitch, { info->fix.type = FB_TYPE_PACKED_PIXELS; info->fix.visual = depth == 8 ? FB_VISUAL_PSEUDOCOLOR : - FB_VISUAL_DIRECTCOLOR; + FB_VISUAL_TRUECOLOR; info->fix.type_aux = 0; info->fix.xpanstep = 1; /* doing it in hw */ info->fix.ypanstep = 1; /* doing it in hw */ -- cgit v0.10.2 From ceb776bc87280eb8d13f38e4d7afae757e95af44 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Mathias=20Fr=C3=B6hlich?= Date: Mon, 19 Oct 2009 12:50:41 -0400 Subject: drm/radeon/kms: fix cs parser tex bit 11 check The problem boils down to the order when the bit11 of the texture size is or'ed to the original width. In the end each mipmap level has the same width or height because of that 11 bit is ored to the scaled down lod with and thus blows up the size again to the full size or more due to the power of two rounding afterwards. The attached patch changes this order so that the texture sizes are computed correct. Also the on error the yet missing inputs to the size computation are printed which helped me to find out where it really breaks. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index c22adff..ed5e983 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -2548,8 +2548,11 @@ void r100_bandwidth_update(struct radeon_device *rdev) static inline void r100_cs_track_texture_print(struct r100_cs_track_texture *t) { DRM_ERROR("pitch %d\n", t->pitch); + DRM_ERROR("use_pitch %d\n", t->use_pitch); DRM_ERROR("width %d\n", t->width); + DRM_ERROR("width_11 %d\n", t->width_11); DRM_ERROR("height %d\n", t->height); + DRM_ERROR("height_11 %d\n", t->height_11); DRM_ERROR("num levels %d\n", t->num_levels); DRM_ERROR("depth %d\n", t->txdepth); DRM_ERROR("bpp %d\n", t->cpp); @@ -2609,15 +2612,17 @@ static int r100_cs_track_texture_check(struct radeon_device *rdev, else w = track->textures[u].pitch / (1 << i); } else { - w = track->textures[u].width / (1 << i); + w = track->textures[u].width; if (rdev->family >= CHIP_RV515) w |= track->textures[u].width_11; + w = w / (1 << i); if (track->textures[u].roundup_w) w = roundup_pow_of_two(w); } - h = track->textures[u].height / (1 << i); + h = track->textures[u].height; if (rdev->family >= CHIP_RV515) h |= track->textures[u].height_11; + h = h / (1 << i); if (track->textures[u].roundup_h) h = roundup_pow_of_two(h); size += w * h; -- cgit v0.10.2 From 5885b7a9f4d2a0405b7e42d44eab4ed2302a8239 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 19 Oct 2009 17:23:33 -0400 Subject: drm/radeon/kms: fix vram_width calculation on r6xx/r7xx Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 1b5aa1f..e87475c 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -339,11 +339,10 @@ int r600_mc_init(struct radeon_device *rdev) { fixed20_12 a; u32 tmp; - int chansize; + int chansize, numchan; int r; /* Get VRAM informations */ - rdev->mc.vram_width = 128; rdev->mc.vram_is_ddr = true; tmp = RREG32(RAMCFG); if (tmp & CHANSIZE_OVERRIDE) { @@ -353,17 +352,23 @@ int r600_mc_init(struct radeon_device *rdev) } else { chansize = 32; } - if (rdev->family == CHIP_R600) { - rdev->mc.vram_width = 8 * chansize; - } else if (rdev->family == CHIP_RV670) { - rdev->mc.vram_width = 4 * chansize; - } else if ((rdev->family == CHIP_RV610) || - (rdev->family == CHIP_RV620)) { - rdev->mc.vram_width = chansize; - } else if ((rdev->family == CHIP_RV630) || - (rdev->family == CHIP_RV635)) { - rdev->mc.vram_width = 2 * chansize; + tmp = RREG32(CHMAP); + switch ((tmp & NOOFCHAN_MASK) >> NOOFCHAN_SHIFT) { + case 0: + default: + numchan = 1; + break; + case 1: + numchan = 2; + break; + case 2: + numchan = 4; + break; + case 3: + numchan = 8; + break; } + rdev->mc.vram_width = numchan * chansize; /* Could aper size report 0 ? */ rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0); rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0); diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h index 5084595..cf238bf 100644 --- a/drivers/gpu/drm/radeon/r600d.h +++ b/drivers/gpu/drm/radeon/r600d.h @@ -270,6 +270,10 @@ #define PCIE_PORT_INDEX 0x0038 #define PCIE_PORT_DATA 0x003C +#define CHMAP 0x2004 +#define NOOFCHAN_SHIFT 12 +#define NOOFCHAN_MASK 0x00003000 + #define RAMCFG 0x2408 #define NOOFBANK_SHIFT 0 #define NOOFBANK_MASK 0x00000001 diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index 595ac63..4055391 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -774,14 +774,36 @@ int rv770_mc_init(struct radeon_device *rdev) { fixed20_12 a; u32 tmp; + int chansize, numchan; int r; /* Get VRAM informations */ - /* FIXME: Don't know how to determine vram width, need to check - * vram_width usage - */ - rdev->mc.vram_width = 128; rdev->mc.vram_is_ddr = true; + tmp = RREG32(MC_ARB_RAMCFG); + if (tmp & CHANSIZE_OVERRIDE) { + chansize = 16; + } else if (tmp & CHANSIZE_MASK) { + chansize = 64; + } else { + chansize = 32; + } + tmp = RREG32(MC_SHARED_CHMAP); + switch ((tmp & NOOFCHAN_MASK) >> NOOFCHAN_SHIFT) { + case 0: + default: + numchan = 1; + break; + case 1: + numchan = 2; + break; + case 2: + numchan = 4; + break; + case 3: + numchan = 8; + break; + } + rdev->mc.vram_width = numchan * chansize; /* Could aper size report 0 ? */ rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0); rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0); diff --git a/drivers/gpu/drm/radeon/rv770d.h b/drivers/gpu/drm/radeon/rv770d.h index 4b9c3d6..a1367ab 100644 --- a/drivers/gpu/drm/radeon/rv770d.h +++ b/drivers/gpu/drm/radeon/rv770d.h @@ -129,6 +129,10 @@ #define HDP_REG_COHERENCY_FLUSH_CNTL 0x54A0 #define HDP_TILING_CONFIG 0x2F3C +#define MC_SHARED_CHMAP 0x2004 +#define NOOFCHAN_SHIFT 12 +#define NOOFCHAN_MASK 0x00003000 + #define MC_ARB_RAMCFG 0x2760 #define NOOFBANK_SHIFT 0 #define NOOFBANK_MASK 0x00000003 @@ -142,6 +146,7 @@ #define CHANSIZE_MASK 0x00000100 #define BURSTLENGTH_SHIFT 9 #define BURSTLENGTH_MASK 0x00000200 +#define CHANSIZE_OVERRIDE (1 << 11) #define MC_VM_AGP_TOP 0x2028 #define MC_VM_AGP_BOT 0x202C #define MC_VM_AGP_BASE 0x2030 -- cgit v0.10.2 From 790cfb34ad645be3bf69265cb05d824aeabcfa11 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 15 Oct 2009 23:26:09 -0400 Subject: drm/radeon/kms: add quirk for acer 5102 doesn't have a tv-out port Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c index 8298c99..fcb9371 100644 --- a/drivers/gpu/drm/radeon/radeon_combios.c +++ b/drivers/gpu/drm/radeon/radeon_combios.c @@ -1579,6 +1579,17 @@ static bool radeon_apply_legacy_quirks(struct drm_device *dev, return true; } +static bool radeon_apply_legacy_tv_quirks(struct drm_device *dev) +{ + /* Acer 5102 has non-existent TV port */ + if (dev->pdev->device == 0x5975 && + dev->pdev->subsystem_vendor == 0x1025 && + dev->pdev->subsystem_device == 0x009f) + return false; + + return true; +} + bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) { struct radeon_device *rdev = dev->dev_private; @@ -1896,16 +1907,18 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) combios_get_table_offset(dev, COMBIOS_TV_INFO_TABLE); if (tv_info) { if (RBIOS8(tv_info + 6) == 'T') { - radeon_add_legacy_encoder(dev, - radeon_get_encoder_id - (dev, - ATOM_DEVICE_TV1_SUPPORT, - 2), - ATOM_DEVICE_TV1_SUPPORT); - radeon_add_legacy_connector(dev, 6, - ATOM_DEVICE_TV1_SUPPORT, - DRM_MODE_CONNECTOR_SVIDEO, - &ddc_i2c); + if (radeon_apply_legacy_tv_quirks(dev)) { + radeon_add_legacy_encoder(dev, + radeon_get_encoder_id + (dev, + ATOM_DEVICE_TV1_SUPPORT, + 2), + ATOM_DEVICE_TV1_SUPPORT); + radeon_add_legacy_connector(dev, 6, + ATOM_DEVICE_TV1_SUPPORT, + DRM_MODE_CONNECTOR_SVIDEO, + &ddc_i2c); + } } } } -- cgit v0.10.2 From bc293e58cb4095f2ad43fe672ae269e31d1a18e2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Mathias=20Fr=C3=B6hlich?= Date: Mon, 19 Oct 2009 17:49:49 -0400 Subject: drm/radeon/kms/atom: get better min pixel clock info Where supported use ulMinPixelClockPLL_Output rather than usMinPixelClockPLL_Output for pll_out_min. This seems to improve pll selection on some boards. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 79d4b77..cec6791 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -641,8 +641,12 @@ bool radeon_atom_get_clock_info(struct drm_device *dev) le16_to_cpu(firmware_info->info.usReferenceClock); p1pll->reference_div = 0; - p1pll->pll_out_min = - le16_to_cpu(firmware_info->info.usMinPixelClockPLL_Output); + if (crev < 2) + p1pll->pll_out_min = + le16_to_cpu(firmware_info->info.usMinPixelClockPLL_Output); + else + p1pll->pll_out_min = + le32_to_cpu(firmware_info->info_12.ulMinPixelClockPLL_Output); p1pll->pll_out_max = le32_to_cpu(firmware_info->info.ulMaxPixelClockPLL_Output); -- cgit v0.10.2 From c54b1820d69a1043acaf50d084852e628266e0e2 Mon Sep 17 00:00:00 2001 From: Robert Noland Date: Tue, 20 Oct 2009 08:11:36 -0500 Subject: drm/radeon/r600: Replace repeated calculations with variable. - Reduce the chance of error and avoid a bit of overhead. - Use switch to assign color and format Signed-off-by: Robert Noland Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/r600_blit.c b/drivers/gpu/drm/radeon/r600_blit.c index d988eec..626a9ab 100644 --- a/drivers/gpu/drm/radeon/r600_blit.c +++ b/drivers/gpu/drm/radeon/r600_blit.c @@ -774,6 +774,7 @@ r600_blit_swap(struct drm_device *dev, { drm_radeon_private_t *dev_priv = dev->dev_private; int cb_format, tex_format; + int sx2, sy2, dx2, dy2; u64 vb_addr; u32 *vb; @@ -790,16 +791,10 @@ r600_blit_swap(struct drm_device *dev, vb = r600_nomm_get_vb_ptr(dev); } - if (cpp == 4) { - cb_format = COLOR_8_8_8_8; - tex_format = FMT_8_8_8_8; - } else if (cpp == 2) { - cb_format = COLOR_5_6_5; - tex_format = FMT_5_6_5; - } else { - cb_format = COLOR_8; - tex_format = FMT_8; - } + sx2 = sx + w; + sy2 = sy + h; + dx2 = dx + w; + dy2 = dy + h; vb[0] = i2f(dx); vb[1] = i2f(dy); @@ -807,31 +802,46 @@ r600_blit_swap(struct drm_device *dev, vb[3] = i2f(sy); vb[4] = i2f(dx); - vb[5] = i2f(dy + h); + vb[5] = i2f(dy2); vb[6] = i2f(sx); - vb[7] = i2f(sy + h); + vb[7] = i2f(sy2); - vb[8] = i2f(dx + w); - vb[9] = i2f(dy + h); - vb[10] = i2f(sx + w); - vb[11] = i2f(sy + h); + vb[8] = i2f(dx2); + vb[9] = i2f(dy2); + vb[10] = i2f(sx2); + vb[11] = i2f(sy2); + + switch(cpp) { + case 4: + cb_format = COLOR_8_8_8_8; + tex_format = FMT_8_8_8_8; + break; + case 2: + cb_format = COLOR_5_6_5; + tex_format = FMT_5_6_5; + break; + default: + cb_format = COLOR_8; + tex_format = FMT_8; + break; + } /* src */ set_tex_resource(dev_priv, tex_format, src_pitch / cpp, - sy + h, src_pitch / cpp, + sy2, src_pitch / cpp, src_gpu_addr); cp_set_surface_sync(dev_priv, - R600_TC_ACTION_ENA, (src_pitch * (sy + h)), src_gpu_addr); + R600_TC_ACTION_ENA, src_pitch * sy2, src_gpu_addr); /* dst */ set_render_target(dev_priv, cb_format, - dst_pitch / cpp, dy + h, + dst_pitch / cpp, dy2, dst_gpu_addr); /* scissors */ - set_scissors(dev_priv, dx, dy, dx + w, dy + h); + set_scissors(dev_priv, dx, dy, dx2, dy2); /* Vertex buffer setup */ vb_addr = dev_priv->gart_buffers_offset + @@ -844,7 +854,7 @@ r600_blit_swap(struct drm_device *dev, cp_set_surface_sync(dev_priv, R600_CB_ACTION_ENA | R600_CB0_DEST_BASE_ENA, - dst_pitch * (dy + h), dst_gpu_addr); + dst_pitch * dy2, dst_gpu_addr); dev_priv->blit_vb->used += 12 * 4; } -- cgit v0.10.2 From 33fdb15c99aac20d238af487fa363d3e5c7ed197 Mon Sep 17 00:00:00 2001 From: Robert Noland Date: Tue, 20 Oct 2009 13:07:38 -0500 Subject: drm/radeon/r600: only assign vb after we know space is available. This patch only changes this is the swap path, where it doesn't loop. Signed-off-by: Robert Noland Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/r600_blit.c b/drivers/gpu/drm/radeon/r600_blit.c index 626a9ab..5ea4323 100644 --- a/drivers/gpu/drm/radeon/r600_blit.c +++ b/drivers/gpu/drm/radeon/r600_blit.c @@ -778,8 +778,6 @@ r600_blit_swap(struct drm_device *dev, u64 vb_addr; u32 *vb; - vb = r600_nomm_get_vb_ptr(dev); - if ((dev_priv->blit_vb->used + 48) > dev_priv->blit_vb->total) { r600_nomm_put_vb(dev); @@ -788,8 +786,8 @@ r600_blit_swap(struct drm_device *dev, return; set_shaders(dev); - vb = r600_nomm_get_vb_ptr(dev); } + vb = r600_nomm_get_vb_ptr(dev); sx2 = sx + w; sy2 = sy + h; -- cgit v0.10.2 From c290dadf4cac25cc91529d84004795ab43fc0821 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 22 Oct 2009 16:12:34 -0400 Subject: drm/radeon/kms/r7xx: add regs for 40 bit CUR/GRPH addresses The *_HIGH regs are reversed. The secondary ones are in the primary block and vice versa. We currently only use a 32 bit internal address, so these are 0 for now. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index f7dcb69..9c26e53 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -577,6 +577,16 @@ int atombios_crtc_set_base(struct drm_crtc *crtc, int x, int y, WREG32(AVIVO_D1VGA_CONTROL, 0); else WREG32(AVIVO_D2VGA_CONTROL, 0); + + if (rdev->family >= CHIP_RV770) { + if (radeon_crtc->crtc_id) { + WREG32(R700_D2GRPH_PRIMARY_SURFACE_ADDRESS_HIGH, 0); + WREG32(R700_D2GRPH_SECONDARY_SURFACE_ADDRESS_HIGH, 0); + } else { + WREG32(R700_D1GRPH_PRIMARY_SURFACE_ADDRESS_HIGH, 0); + WREG32(R700_D1GRPH_SECONDARY_SURFACE_ADDRESS_HIGH, 0); + } + } WREG32(AVIVO_D1GRPH_PRIMARY_SURFACE_ADDRESS + radeon_crtc->crtc_offset, (u32) fb_location); WREG32(AVIVO_D1GRPH_SECONDARY_SURFACE_ADDRESS + diff --git a/drivers/gpu/drm/radeon/r500_reg.h b/drivers/gpu/drm/radeon/r500_reg.h index 868add6..7baa739 100644 --- a/drivers/gpu/drm/radeon/r500_reg.h +++ b/drivers/gpu/drm/radeon/r500_reg.h @@ -384,9 +384,16 @@ # define AVIVO_D1GRPH_TILED (1 << 20) # define AVIVO_D1GRPH_MACRO_ADDRESS_MODE (1 << 21) +/* The R7xx *_HIGH surface regs are backwards; the D1 regs are in the D2 + * block and vice versa. This applies to GRPH, CUR, etc. + */ #define AVIVO_D1GRPH_LUT_SEL 0x6108 #define AVIVO_D1GRPH_PRIMARY_SURFACE_ADDRESS 0x6110 +#define R700_D1GRPH_PRIMARY_SURFACE_ADDRESS_HIGH 0x6914 +#define R700_D2GRPH_PRIMARY_SURFACE_ADDRESS_HIGH 0x6114 #define AVIVO_D1GRPH_SECONDARY_SURFACE_ADDRESS 0x6118 +#define R700_D1GRPH_SECONDARY_SURFACE_ADDRESS_HIGH 0x691c +#define R700_D2GRPH_SECONDARY_SURFACE_ADDRESS_HIGH 0x611c #define AVIVO_D1GRPH_PITCH 0x6120 #define AVIVO_D1GRPH_SURFACE_OFFSET_X 0x6124 #define AVIVO_D1GRPH_SURFACE_OFFSET_Y 0x6128 @@ -404,6 +411,8 @@ # define AVIVO_D1CURSOR_MODE_MASK (3 << 8) # define AVIVO_D1CURSOR_MODE_24BPP 2 #define AVIVO_D1CUR_SURFACE_ADDRESS 0x6408 +#define R700_D1CUR_SURFACE_ADDRESS_HIGH 0x6c0c +#define R700_D2CUR_SURFACE_ADDRESS_HIGH 0x640c #define AVIVO_D1CUR_SIZE 0x6410 #define AVIVO_D1CUR_POSITION 0x6414 #define AVIVO_D1CUR_HOT_SPOT 0x6418 diff --git a/drivers/gpu/drm/radeon/radeon_cursor.c b/drivers/gpu/drm/radeon/radeon_cursor.c index b13c79e..28772a3 100644 --- a/drivers/gpu/drm/radeon/radeon_cursor.c +++ b/drivers/gpu/drm/radeon/radeon_cursor.c @@ -109,9 +109,15 @@ static void radeon_set_cursor(struct drm_crtc *crtc, struct drm_gem_object *obj, struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); struct radeon_device *rdev = crtc->dev->dev_private; - if (ASIC_IS_AVIVO(rdev)) + if (ASIC_IS_AVIVO(rdev)) { + if (rdev->family >= CHIP_RV770) { + if (radeon_crtc->crtc_id) + WREG32(R700_D2CUR_SURFACE_ADDRESS_HIGH, 0); + else + WREG32(R700_D1CUR_SURFACE_ADDRESS_HIGH, 0); + } WREG32(AVIVO_D1CUR_SURFACE_ADDRESS + radeon_crtc->crtc_offset, gpu_addr); - else { + } else { radeon_crtc->legacy_cursor_offset = gpu_addr - radeon_crtc->legacy_display_base_addr; /* offset is from DISP(2)_BASE_ADDRESS */ WREG32(RADEON_CUR_OFFSET + radeon_crtc->crtc_offset, radeon_crtc->legacy_cursor_offset); -- cgit v0.10.2 From ebbe1cb936dfc96d809ccf4d64a9755f8ba0c0ff Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 16 Oct 2009 11:15:25 -0400 Subject: drm/radeon/kms/atom: add support for spread spectrum (v2) Spread spectrum is a periodic disturbance added to the feedback divider to change the pixel clock periodically to reduce interference. Only enabled on LVDS. v2: add support for r4xx and fix DCE 3 Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h index 5d40208..c11dddd 100644 --- a/drivers/gpu/drm/radeon/atombios.h +++ b/drivers/gpu/drm/radeon/atombios.h @@ -2314,7 +2314,7 @@ typedef struct _ATOM_SPREAD_SPECTRUM_ASSIGNMENT { UCHAR ucSS_Step; UCHAR ucSS_Delay; UCHAR ucSS_Id; - UCHAR ucRecommandedRef_Div; + UCHAR ucRecommendedRef_Div; UCHAR ucSS_Range; /* it was reserved for V11 */ } ATOM_SPREAD_SPECTRUM_ASSIGNMENT; diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 9c26e53..e5a3c30 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -351,6 +351,61 @@ static void atombios_crtc_set_timing(struct drm_crtc *crtc, atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); } +static void atombios_set_ss(struct drm_crtc *crtc, int enable) +{ + struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); + struct drm_device *dev = crtc->dev; + struct radeon_device *rdev = dev->dev_private; + struct drm_encoder *encoder = NULL; + struct radeon_encoder *radeon_encoder = NULL; + struct radeon_encoder_atom_dig *dig = NULL; + int index = GetIndexIntoMasterTable(COMMAND, EnableSpreadSpectrumOnPPLL); + ENABLE_SPREAD_SPECTRUM_ON_PPLL_PS_ALLOCATION args; + ENABLE_LVDS_SS_PARAMETERS legacy_args; + uint16_t percentage = 0; + uint8_t type = 0, step = 0, delay = 0, range = 0; + + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { + if (encoder->crtc == crtc) { + radeon_encoder = to_radeon_encoder(encoder); + dig = radeon_encoder->enc_priv; + /* only enable spread spectrum on LVDS */ + if (dig && dig->ss) { + percentage = dig->ss->percentage; + type = dig->ss->type; + step = dig->ss->step; + delay = dig->ss->delay; + range = dig->ss->range; + } else if (enable) + return; + break; + } + } + + if (!radeon_encoder) + return; + + if (ASIC_IS_AVIVO(rdev)) { + memset(&args, 0, sizeof(args)); + args.usSpreadSpectrumPercentage = percentage; + args.ucSpreadSpectrumType = type; + args.ucSpreadSpectrumStep = step; + args.ucSpreadSpectrumDelay = delay; + args.ucSpreadSpectrumRange = range; + args.ucPpll = radeon_crtc->crtc_id ? ATOM_PPLL2 : ATOM_PPLL1; + args.ucEnable = enable; + atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); + } else { + memset(&legacy_args, 0, sizeof(legacy_args)); + legacy_args.usSpreadSpectrumPercentage = percentage; + legacy_args.ucSpreadSpectrumType = type; + legacy_args.ucSpreadSpectrumStepSize_Delay = (step & 3) << 2; + legacy_args.ucSpreadSpectrumStepSize_Delay |= (delay & 7) << 4; + legacy_args.ucEnable = enable; + atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&legacy_args); + } +} + void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) { struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); @@ -373,8 +428,6 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) memset(&args, 0, sizeof(args)); if (ASIC_IS_AVIVO(rdev)) { - uint32_t ss_cntl; - if ((rdev->family == CHIP_RS600) || (rdev->family == CHIP_RS690) || (rdev->family == CHIP_RS740)) @@ -385,15 +438,6 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) pll_flags |= RADEON_PLL_PREFER_HIGH_FB_DIV; else pll_flags |= RADEON_PLL_PREFER_LOW_REF_DIV; - - /* disable spread spectrum clocking for now -- thanks Hedy Lamarr */ - if (radeon_crtc->crtc_id == 0) { - ss_cntl = RREG32(AVIVO_P1PLL_INT_SS_CNTL); - WREG32(AVIVO_P1PLL_INT_SS_CNTL, ss_cntl & ~1); - } else { - ss_cntl = RREG32(AVIVO_P2PLL_INT_SS_CNTL); - WREG32(AVIVO_P2PLL_INT_SS_CNTL, ss_cntl & ~1); - } } else { pll_flags |= RADEON_PLL_LEGACY; @@ -641,7 +685,9 @@ int atombios_crtc_mode_set(struct drm_crtc *crtc, /* TODO color tiling */ + atombios_set_ss(crtc, 0); atombios_crtc_set_pll(crtc, adjusted_mode); + atombios_set_ss(crtc, 1); atombios_crtc_set_timing(crtc, adjusted_mode); if (ASIC_IS_AVIVO(rdev)) diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index cec6791..1872925 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -771,6 +771,46 @@ bool radeon_atombios_get_tmds_info(struct radeon_encoder *encoder, return false; } +static struct radeon_atom_ss *radeon_atombios_get_ss_info(struct + radeon_encoder + *encoder, + int id) +{ + struct drm_device *dev = encoder->base.dev; + struct radeon_device *rdev = dev->dev_private; + struct radeon_mode_info *mode_info = &rdev->mode_info; + int index = GetIndexIntoMasterTable(DATA, PPLL_SS_Info); + uint16_t data_offset; + struct _ATOM_SPREAD_SPECTRUM_INFO *ss_info; + uint8_t frev, crev; + struct radeon_atom_ss *ss = NULL; + + if (id > ATOM_MAX_SS_ENTRY) + return NULL; + + atom_parse_data_header(mode_info->atom_context, index, NULL, &frev, + &crev, &data_offset); + + ss_info = + (struct _ATOM_SPREAD_SPECTRUM_INFO *)(mode_info->atom_context->bios + data_offset); + + if (ss_info) { + ss = + kzalloc(sizeof(struct radeon_atom_ss), GFP_KERNEL); + + if (!ss) + return NULL; + + ss->percentage = le16_to_cpu(ss_info->asSS_Info[id].usSpreadSpectrumPercentage); + ss->type = ss_info->asSS_Info[id].ucSpreadSpectrumType; + ss->step = ss_info->asSS_Info[id].ucSS_Step; + ss->delay = ss_info->asSS_Info[id].ucSS_Delay; + ss->range = ss_info->asSS_Info[id].ucSS_Range; + ss->refdiv = ss_info->asSS_Info[id].ucRecommendedRef_Div; + } + return ss; +} + union lvds_info { struct _ATOM_LVDS_INFO info; struct _ATOM_LVDS_INFO_V12 info_12; @@ -826,6 +866,8 @@ struct radeon_encoder_atom_dig *radeon_atombios_get_lvds_info(struct /* set crtc values */ drm_mode_set_crtcinfo(&lvds->native_mode, CRTC_INTERLACE_HALVE_V); + lvds->ss = radeon_atombios_get_ss_info(encoder, lvds_info->info.ucSS_Id); + encoder->native_mode = lvds->native_mode; } return lvds; diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h index b6868fb..2ea5707 100644 --- a/drivers/gpu/drm/radeon/radeon_mode.h +++ b/drivers/gpu/drm/radeon/radeon_mode.h @@ -260,6 +260,16 @@ struct radeon_encoder_int_tmds { struct radeon_tmds_pll tmds_pll[4]; }; +/* spread spectrum */ +struct radeon_atom_ss { + uint16_t percentage; + uint8_t type; + uint8_t step; + uint8_t delay; + uint8_t range; + uint8_t refdiv; +}; + struct radeon_encoder_atom_dig { /* atom dig */ bool coherent_mode; @@ -267,6 +277,7 @@ struct radeon_encoder_atom_dig { /* atom lvds */ uint32_t lvds_misc; uint16_t panel_pwr_delay; + struct radeon_atom_ss *ss; /* panel mode */ struct drm_display_mode native_mode; }; -- cgit v0.10.2 From 3e5cb98dfe87cc61d0a1119dd8aa2b1e4cfab424 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 16 Oct 2009 12:21:24 -0400 Subject: drm/radeon/kms: add support for msi Try to enable msi on chips that support it. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index ed5e983..b438b52 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -186,7 +186,7 @@ static inline uint32_t r100_irq_ack(struct radeon_device *rdev) int r100_irq_process(struct radeon_device *rdev) { - uint32_t status; + uint32_t status, msi_rearm; status = r100_irq_ack(rdev); if (!status) { @@ -209,6 +209,21 @@ int r100_irq_process(struct radeon_device *rdev) } status = r100_irq_ack(rdev); } + if (rdev->msi_enabled) { + switch (rdev->family) { + case CHIP_RS400: + case CHIP_RS480: + msi_rearm = RREG32(RADEON_AIC_CNTL) & ~RS400_MSI_REARM; + WREG32(RADEON_AIC_CNTL, msi_rearm); + WREG32(RADEON_AIC_CNTL, msi_rearm | RS400_MSI_REARM); + break; + default: + msi_rearm = RREG32(RADEON_MSI_REARM_EN) & ~RV370_MSI_REARM_EN; + WREG32(RADEON_MSI_REARM_EN, msi_rearm); + WREG32(RADEON_MSI_REARM_EN, msi_rearm | RV370_MSI_REARM_EN); + break; + } + } return IRQ_HANDLED; } diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 8b60e36..ea3efd7 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -784,6 +784,7 @@ struct radeon_device { const struct firmware *me_fw; /* all family ME firmware */ const struct firmware *pfp_fw; /* r6/700 PFP firmware */ struct r600_blit r600_blit; + int msi_enabled; /* msi enabled */ }; int radeon_device_init(struct radeon_device *rdev, diff --git a/drivers/gpu/drm/radeon/radeon_irq_kms.c b/drivers/gpu/drm/radeon/radeon_irq_kms.c index 8e0a875..a0fe623 100644 --- a/drivers/gpu/drm/radeon/radeon_irq_kms.c +++ b/drivers/gpu/drm/radeon/radeon_irq_kms.c @@ -92,6 +92,13 @@ int radeon_irq_kms_init(struct radeon_device *rdev) if (r) { return r; } + /* enable msi */ + rdev->msi_enabled = 0; + if (rdev->family >= CHIP_RV380) { + int ret = pci_enable_msi(rdev->pdev); + if (!ret) + rdev->msi_enabled = 1; + } drm_irq_install(rdev->ddev); rdev->irq.installed = true; DRM_INFO("radeon: irq initialized.\n"); @@ -103,5 +110,7 @@ void radeon_irq_kms_fini(struct radeon_device *rdev) if (rdev->irq.installed) { rdev->irq.installed = false; drm_irq_uninstall(rdev->ddev); + if (rdev->msi_enabled) + pci_disable_msi(rdev->pdev); } } diff --git a/drivers/gpu/drm/radeon/radeon_reg.h b/drivers/gpu/drm/radeon/radeon_reg.h index bfa1ab9..29ab759 100644 --- a/drivers/gpu/drm/radeon/radeon_reg.h +++ b/drivers/gpu/drm/radeon/radeon_reg.h @@ -290,6 +290,8 @@ #define RADEON_BUS_CNTL 0x0030 # define RADEON_BUS_MASTER_DIS (1 << 6) # define RADEON_BUS_BIOS_DIS_ROM (1 << 12) +# define RS600_BUS_MASTER_DIS (1 << 14) +# define RS600_MSI_REARM (1 << 20) /* rs600/rs690/rs740 */ # define RADEON_BUS_RD_DISCARD_EN (1 << 24) # define RADEON_BUS_RD_ABORT_EN (1 << 25) # define RADEON_BUS_MSTR_DISCONNECT_EN (1 << 28) @@ -297,6 +299,9 @@ # define RADEON_BUS_READ_BURST (1 << 30) #define RADEON_BUS_CNTL1 0x0034 # define RADEON_BUS_WAIT_ON_LOCK_EN (1 << 4) +/* rv370/rv380, rv410, r423/r430/r480, r5xx */ +#define RADEON_MSI_REARM_EN 0x0160 +# define RV370_MSI_REARM_EN (1 << 0) /* #define RADEON_PCIE_INDEX 0x0030 */ /* #define RADEON_PCIE_DATA 0x0034 */ @@ -3311,6 +3316,7 @@ #define RADEON_AIC_CNTL 0x01d0 # define RADEON_PCIGART_TRANSLATE_EN (1 << 0) # define RADEON_DIS_OUT_OF_PCI_GART_ACCESS (1 << 1) +# define RS400_MSI_REARM (1 << 3) /* rs400/rs480 */ #define RADEON_AIC_LO_ADDR 0x01dc #define RADEON_AIC_PT_BASE 0x01d8 #define RADEON_AIC_HI_ADDR 0x01e0 diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c index 10dfa78..942754c 100644 --- a/drivers/gpu/drm/radeon/rs600.c +++ b/drivers/gpu/drm/radeon/rs600.c @@ -242,7 +242,7 @@ void rs600_irq_disable(struct radeon_device *rdev) int rs600_irq_process(struct radeon_device *rdev) { - uint32_t status; + uint32_t status, msi_rearm; uint32_t r500_disp_int; status = rs600_irq_ack(rdev, &r500_disp_int); @@ -260,6 +260,22 @@ int rs600_irq_process(struct radeon_device *rdev) drm_handle_vblank(rdev->ddev, 1); status = rs600_irq_ack(rdev, &r500_disp_int); } + if (rdev->msi_enabled) { + switch (rdev->family) { + case CHIP_RS600: + case CHIP_RS690: + case CHIP_RS740: + msi_rearm = RREG32(RADEON_BUS_CNTL) & ~RS600_MSI_REARM; + WREG32(RADEON_BUS_CNTL, msi_rearm); + WREG32(RADEON_BUS_CNTL, msi_rearm | RS600_MSI_REARM); + break; + default: + msi_rearm = RREG32(RADEON_MSI_REARM_EN) & ~RV370_MSI_REARM_EN; + WREG32(RADEON_MSI_REARM_EN, msi_rearm); + WREG32(RADEON_MSI_REARM_EN, msi_rearm | RV370_MSI_REARM_EN); + break; + } + } return IRQ_HANDLED; } -- cgit v0.10.2 From ec29b8d2af01912bb79adda8aeab4293539f29ac Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 26 Oct 2009 14:40:01 +0900 Subject: perf tools: Remove -Wcast-align The present use of -Wcast-align causes the build to blow up on SH due to generating a "cast increases required alignment of target type" error on each invocation of list_for_each_entry(). It seems that this was previously reported and killed off in the ia64 support patch, but nothing seems to have happened with that. Presumably the same problem still remains there, too. Signed-off-by: Paul Mundt LKML-Reference: <20091026054000.GA13517@linux-sh.org> Signed-off-by: Ingo Molnar diff --git a/tools/perf/Makefile b/tools/perf/Makefile index 46e877b..7e190d5 100644 --- a/tools/perf/Makefile +++ b/tools/perf/Makefile @@ -177,8 +177,7 @@ endif # Include saner warnings here, which can catch bugs: # -EXTRA_WARNINGS := -Wcast-align -EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wformat +EXTRA_WARNINGS := -Wformat EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wformat-security EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wformat-y2k EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wshadow -- cgit v0.10.2 From ae1b22f6e46c03cede7cea234d0bf2253b4261cf Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Mon, 26 Oct 2009 14:26:04 +1030 Subject: x86: Side-step lguest problem by only building cmpxchg8b_emu for pre-Pentium Commit 79e1dd05d1a22 "x86: Provide an alternative() based cmpxchg64()" broke lguest, even on systems which have cmpxchg8b support. The emulation code gets used until alternatives get run, but it contains native instructions, not their paravirt alternatives. The simplest fix is to turn this code off except for 386 and 486 builds. Reported-by: Johannes Stezenbach Signed-off-by: Rusty Russell Acked-by: H. Peter Anvin Cc: lguest@ozlabs.org Cc: Arjan van de Ven Cc: Jeremy Fitzhardinge Cc: Linus Torvalds LKML-Reference: <200910261426.05769.rusty@rustcorp.com.au> Signed-off-by: Ingo Molnar diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu index f2824fb..2649840 100644 --- a/arch/x86/Kconfig.cpu +++ b/arch/x86/Kconfig.cpu @@ -400,7 +400,7 @@ config X86_TSC config X86_CMPXCHG64 def_bool y - depends on X86_PAE || X86_64 || MCORE2 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MATOM + depends on !M386 && !M486 # this should be set for all -march=.. options where the compiler # generates cmov. -- cgit v0.10.2 From 72ed7de74e8f0fad0d8e567ae1f987b740accb3f Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Mon, 26 Oct 2009 11:11:43 +0100 Subject: x86: crash_dump: Fix non-pae kdump kernel memory accesses Non-PAE 32-bit dump kernels may wrap an address around 4G and poke unwanted space. ptes there are 32-bit long, and since pfn << PAGE_SIZE may exceed this limit, high pfn bits are cropped and wrong address mapped by kmap_atomic_pfn in copy_oldmem_page. Don't allow this behavior in non-PAE kdump kernels by checking pfns passed into copy_oldmem_page. In the case of failure, userspace process gets EFAULT. [v2] - fix comments - move ifdefs inside the function Signed-off-by: Jiri Slaby Cc: Vivek Goyal Cc: Eric W. Biederman Cc: Simon Horman Cc: Paul Mundt LKML-Reference: <1256551903-30567-1-git-send-email-jirislaby@gmail.com> Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/crash_dump_32.c b/arch/x86/kernel/crash_dump_32.c index f7cdb3b..cd97ce1 100644 --- a/arch/x86/kernel/crash_dump_32.c +++ b/arch/x86/kernel/crash_dump_32.c @@ -16,6 +16,22 @@ static void *kdump_buf_page; /* Stores the physical address of elf header of crash image. */ unsigned long long elfcorehdr_addr = ELFCORE_ADDR_MAX; +static inline bool is_crashed_pfn_valid(unsigned long pfn) +{ +#ifndef CONFIG_X86_PAE + /* + * non-PAE kdump kernel executed from a PAE one will crop high pte + * bits and poke unwanted space counting again from address 0, we + * don't want that. pte must fit into unsigned long. In fact the + * test checks high 12 bits for being zero (pfn will be shifted left + * by PAGE_SHIFT). + */ + return pte_pfn(pfn_pte(pfn, __pgprot(0))) == pfn; +#else + return true; +#endif +} + /** * copy_oldmem_page - copy one page from "oldmem" * @pfn: page frame number to be copied @@ -41,6 +57,9 @@ ssize_t copy_oldmem_page(unsigned long pfn, char *buf, if (!csize) return 0; + if (!is_crashed_pfn_valid(pfn)) + return -EFAULT; + vaddr = kmap_atomic_pfn(pfn, KM_PTE0); if (!userbuf) { -- cgit v0.10.2 From 81766741fe1eee3884219e8daaf03f466f2ed52f Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 26 Oct 2009 15:20:29 +0000 Subject: x86-64: Fix register leak in 32-bit syscall audting Restoring %ebp after the call to audit_syscall_exit() is not only unnecessary (because the register didn't get clobbered), but in the sysenter case wasn't even doing the right thing: It loaded %ebp from a location below the top of stack (RBP < ARGOFFSET), i.e. arbitrary kernel data got passed back to user mode in the register. Signed-off-by: Jan Beulich Acked-by: Roland McGrath Cc: LKML-Reference: <4AE5CC4D020000780001BD13@vpn.id2.novell.com> Signed-off-by: Ingo Molnar diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S index 1733f9f..581b056 100644 --- a/arch/x86/ia32/ia32entry.S +++ b/arch/x86/ia32/ia32entry.S @@ -204,7 +204,7 @@ sysexit_from_sys_call: movl RDI-ARGOFFSET(%rsp),%r8d /* reload 5th syscall arg */ .endm - .macro auditsys_exit exit,ebpsave=RBP + .macro auditsys_exit exit testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),TI_flags(%r10) jnz ia32_ret_from_sys_call TRACE_IRQS_ON @@ -217,7 +217,6 @@ sysexit_from_sys_call: call audit_syscall_exit GET_THREAD_INFO(%r10) movl RAX-ARGOFFSET(%rsp),%eax /* reload syscall return value */ - movl \ebpsave-ARGOFFSET(%rsp),%ebp /* reload user register value */ movl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),%edi cli TRACE_IRQS_OFF @@ -351,7 +350,7 @@ cstar_auditsys: jmp cstar_dispatch sysretl_audit: - auditsys_exit sysretl_from_sys_call, RCX /* user %ebp in RCX slot */ + auditsys_exit sysretl_from_sys_call #endif cstar_tracesys: -- cgit v0.10.2 From e73486b8c9d8d649dd080eb1b810e5b0c11a955a Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Wed, 23 Sep 2009 12:59:07 +0900 Subject: ARM: S3C64XX: Fix S3C64XX_CLKDIV0_ARM_MASK value Fix the values of S3C6400_CLKDIV0_ARM_MASK and S3C6410_CLKDIV0_ARM_MASK. Signed-off-by: Kukjin Kim Signed-off-by: Ben Dooks diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h b/arch/arm/plat-s3c64xx/include/plat/regs-clock.h index a8777a7..ff46e7f 100644 --- a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h +++ b/arch/arm/plat-s3c64xx/include/plat/regs-clock.h @@ -51,8 +51,8 @@ #define S3C6400_CLKDIV0_HCLK_SHIFT (8) #define S3C6400_CLKDIV0_MPLL_MASK (0x1 << 4) #define S3C6400_CLKDIV0_MPLL_SHIFT (4) -#define S3C6400_CLKDIV0_ARM_MASK (0x3 << 0) -#define S3C6410_CLKDIV0_ARM_MASK (0x7 << 0) +#define S3C6400_CLKDIV0_ARM_MASK (0x7 << 0) +#define S3C6410_CLKDIV0_ARM_MASK (0xf << 0) #define S3C6400_CLKDIV0_ARM_SHIFT (0) /* CLKDIV1 */ -- cgit v0.10.2 From e179ac0f4ea4f1e989fa754bada366f88fd81d27 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 21 Oct 2009 18:17:58 +0100 Subject: ARM: S3C64XX: Set rate of crystal mux The current code assumes that the external clock mux will be set to the crystal. Set this up explicitly within the clock API. Signed-off-by: Mark Brown Signed-off-by: Ben Dooks diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c index 9745852..6ffa21e 100644 --- a/arch/arm/plat-s3c64xx/s3c6400-clock.c +++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c @@ -677,6 +677,9 @@ void __init_or_cpufreq s3c6400_setup_clocks(void) printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal); + /* For now assume the mux always selects the crystal */ + clk_ext_xtal_mux.parent = xtal_clk; + epll = s3c6400_get_epll(xtal); mpll = s3c6400_get_pll(xtal, __raw_readl(S3C_MPLL_CON)); apll = s3c6400_get_pll(xtal, __raw_readl(S3C_APLL_CON)); -- cgit v0.10.2 From 772be899bc022ef2b911c3611b487d417e3269c3 Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Tue, 20 Oct 2009 12:54:02 +0800 Subject: x86: Make EFI RTC function depend on 32bit again The EFI RTC functions are only available on 32 bit. commit 7bd867df (x86: Move get/set_wallclock to x86_platform_ops) removed the 32bit dependency which leads to boot crashes on 64bit EFI systems. Add the dependency back. Solves: http://bugzilla.kernel.org/show_bug.cgi?id=14466 Tested-by: Matthew Garrett Signed-off-by: Feng Tang LKML-Reference: <20091020125402.028d66d5@feng-desktop> Signed-off-by: Thomas Gleixner diff --git a/arch/x86/kernel/efi.c b/arch/x86/kernel/efi.c index ad5bd98..cdcfb12 100644 --- a/arch/x86/kernel/efi.c +++ b/arch/x86/kernel/efi.c @@ -454,8 +454,10 @@ void __init efi_init(void) if (add_efi_memmap) do_add_efi_memmap(); +#ifdef CONFIG_X86_32 x86_platform.get_wallclock = efi_get_time; x86_platform.set_wallclock = efi_set_rtc_mmss; +#endif /* Setup for EFI runtime service */ reboot_type = BOOT_EFI; -- cgit v0.10.2 From 8f552a66a40bcc6e903e91310f42fe140e0342c4 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 27 Oct 2009 11:16:09 -0400 Subject: drm/radeon/kms/atom: loosen pll min output limits Limiting the pll output range is a good thing generally as it limits the number of possible pll combinations for a given frequency presumably to the ones that work best on each card. That's why the limits are in the bios tables. However, certain duallink DVI monitors seem to like pll combinations that would be limited by this at least on pre-DCE 3.0 r6xx hardware. This might need to be adjusted per family or per clock range in the future. See fdo bug 24727. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 1872925..1c9a9c4 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -655,6 +655,16 @@ bool radeon_atom_get_clock_info(struct drm_device *dev) p1pll->pll_out_min = 64800; else p1pll->pll_out_min = 20000; + } else if (p1pll->pll_out_min > 64800) { + /* Limiting the pll output range is a good thing generally as + * it limits the number of possible pll combinations for a given + * frequency presumably to the ones that work best on each card. + * However, certain duallink DVI monitors seem to like + * pll combinations that would be limited by this at least on + * pre-DCE 3.0 r6xx hardware. This might need to be adjusted per + * family. + */ + p1pll->pll_out_min = 64800; } p1pll->pll_in_min = -- cgit v0.10.2 From d56ef9c8fd34ed29ffae27598a864b4a9a82521b Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 27 Oct 2009 12:11:09 -0400 Subject: drm/radeon/kms/atom: Fix DVO support DVO in 12 bit mode (which seems to be the most common config) requires 2x ppll. Fixes fdo bug 21857. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index e5a3c30..8516e1b 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -483,8 +483,14 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&adjust_pll_args); adjusted_clock = le16_to_cpu(adjust_pll_args.usPixelClock) * 10; - } else - adjusted_clock = mode->clock; + } else { + /* DVO wants 2x pixel clock if the DVO chip is in 12 bit mode */ + if (ASIC_IS_AVIVO(rdev) && + (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1)) + adjusted_clock = mode->clock * 2; + else + adjusted_clock = mode->clock; + } if (radeon_crtc->crtc_id == 0) pll = &rdev->clock.p1pll; -- cgit v0.10.2 From 61c4b24b3e3bb83bfe29f24fe566281b4f722237 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Mathias=20Fr=C3=B6hlich?= Date: Tue, 27 Oct 2009 15:08:01 -0400 Subject: drm/radeon/kms/atom: Make card_info per device Make the struct card_info, which is a per struct radeon_device dataset, a struct member of the radeon device instead of a static per kernel module value. This should avoid potential problems with two radeon cards installed in one system. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index d1cdda9..88c1907 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -443,20 +443,24 @@ static uint32_t cail_reg_read(struct card_info *info, uint32_t reg) return r; } -static struct card_info atom_card_info = { - .dev = NULL, - .reg_read = cail_reg_read, - .reg_write = cail_reg_write, - .mc_read = cail_mc_read, - .mc_write = cail_mc_write, - .pll_read = cail_pll_read, - .pll_write = cail_pll_write, -}; - int radeon_atombios_init(struct radeon_device *rdev) { - atom_card_info.dev = rdev->ddev; - rdev->mode_info.atom_context = atom_parse(&atom_card_info, rdev->bios); + struct card_info *atom_card_info = + kzalloc(sizeof(struct card_info), GFP_KERNEL); + + if (!atom_card_info) + return -ENOMEM; + + rdev->mode_info.atom_card_info = atom_card_info; + atom_card_info->dev = rdev->ddev; + atom_card_info->reg_read = cail_reg_read; + atom_card_info->reg_write = cail_reg_write; + atom_card_info->mc_read = cail_mc_read; + atom_card_info->mc_write = cail_mc_write; + atom_card_info->pll_read = cail_pll_read; + atom_card_info->pll_write = cail_pll_write; + + rdev->mode_info.atom_context = atom_parse(atom_card_info, rdev->bios); radeon_atom_initialize_bios_scratch_regs(rdev->ddev); return 0; } @@ -464,6 +468,7 @@ int radeon_atombios_init(struct radeon_device *rdev) void radeon_atombios_fini(struct radeon_device *rdev) { kfree(rdev->mode_info.atom_context); + kfree(rdev->mode_info.atom_card_info); } int radeon_combios_init(struct radeon_device *rdev) diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h index 2ea5707..ccb7838 100644 --- a/drivers/gpu/drm/radeon/radeon_mode.h +++ b/drivers/gpu/drm/radeon/radeon_mode.h @@ -172,6 +172,7 @@ enum radeon_connector_table { struct radeon_mode_info { struct atom_context *atom_context; + struct card_info *atom_card_info; enum radeon_connector_table connector_table; bool mode_config_initialized; struct radeon_crtc *crtcs[2]; -- cgit v0.10.2 From a2d49ae7df5b96fba3c63710df61412587fc6a24 Mon Sep 17 00:00:00 2001 From: James Simmons Date: Tue, 27 Oct 2009 21:09:24 +0000 Subject: drm/kms: typo fix I believe this is a typo. Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index 9c92461..dc8e374 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -707,7 +707,7 @@ int drm_fb_helper_set_par(struct fb_info *info) if (crtc->fb == fb_helper->crtc_info[i].mode_set.fb) { mutex_lock(&dev->mode_config.mutex); - ret = crtc->funcs->set_config(&fb_helper->crtc_info->mode_set); + ret = crtc->funcs->set_config(&fb_helper->crtc_info[i].mode_set); mutex_unlock(&dev->mode_config.mutex); if (ret) return ret; -- cgit v0.10.2 From d11aa88b33b071d55181a7a482b9e7494888c10e Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 28 Oct 2009 00:51:20 -0400 Subject: drm/radeon/kms/atom: fix potential oops in spread spectrum code Make sure we have an LVDS encoder before casting enc_priv. [airlied: also fix two missing cpu_to_le16 casts we noticed on irc] Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 8516e1b..c15287a 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -368,14 +368,17 @@ static void atombios_set_ss(struct drm_crtc *crtc, int enable) list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { if (encoder->crtc == crtc) { radeon_encoder = to_radeon_encoder(encoder); - dig = radeon_encoder->enc_priv; /* only enable spread spectrum on LVDS */ - if (dig && dig->ss) { - percentage = dig->ss->percentage; - type = dig->ss->type; - step = dig->ss->step; - delay = dig->ss->delay; - range = dig->ss->range; + if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) { + dig = radeon_encoder->enc_priv; + if (dig && dig->ss) { + percentage = dig->ss->percentage; + type = dig->ss->type; + step = dig->ss->step; + delay = dig->ss->delay; + range = dig->ss->range; + } else if (enable) + return; } else if (enable) return; break; @@ -387,7 +390,7 @@ static void atombios_set_ss(struct drm_crtc *crtc, int enable) if (ASIC_IS_AVIVO(rdev)) { memset(&args, 0, sizeof(args)); - args.usSpreadSpectrumPercentage = percentage; + args.usSpreadSpectrumPercentage = cpu_to_le16(percentage); args.ucSpreadSpectrumType = type; args.ucSpreadSpectrumStep = step; args.ucSpreadSpectrumDelay = delay; @@ -397,7 +400,7 @@ static void atombios_set_ss(struct drm_crtc *crtc, int enable) atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); } else { memset(&legacy_args, 0, sizeof(legacy_args)); - legacy_args.usSpreadSpectrumPercentage = percentage; + legacy_args.usSpreadSpectrumPercentage = cpu_to_le16(percentage); legacy_args.ucSpreadSpectrumType = type; legacy_args.ucSpreadSpectrumStepSize_Delay = (step & 3) << 2; legacy_args.ucSpreadSpectrumStepSize_Delay |= (delay & 7) << 4; -- cgit v0.10.2 From fc7f7119d2ed97fff1aaddad6bf7d61ed446cf37 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 28 Oct 2009 01:46:54 -0400 Subject: drm/radeon/kms: add quirk for hp dc5750 Doesn't have a tv-out port Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c index fcb9371..a36ede0 100644 --- a/drivers/gpu/drm/radeon/radeon_combios.c +++ b/drivers/gpu/drm/radeon/radeon_combios.c @@ -1587,6 +1587,12 @@ static bool radeon_apply_legacy_tv_quirks(struct drm_device *dev) dev->pdev->subsystem_device == 0x009f) return false; + /* HP dc5750 has non-existent TV port */ + if (dev->pdev->device == 0x5974 && + dev->pdev->subsystem_vendor == 0x103c && + dev->pdev->subsystem_device == 0x280a) + return false; + return true; } -- cgit v0.10.2 From ea1495a6274c9542a168337536f8ce74d1173f23 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 27 Oct 2009 11:57:53 +1100 Subject: drm/radeon/kms: fix rc410 suspend/resume. This fixes suspend/resume on my rc410 motherboard, it restores the memory controller setup before posting the GPU, since it seems to need the MC_FB_LOCATION setup correctly. Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/rs400.c b/drivers/gpu/drm/radeon/rs400.c index a769c29..ca03716 100644 --- a/drivers/gpu/drm/radeon/rs400.c +++ b/drivers/gpu/drm/radeon/rs400.c @@ -418,6 +418,8 @@ int rs400_resume(struct radeon_device *rdev) rs400_gart_disable(rdev); /* Resume clock before doing reset */ r300_clock_startup(rdev); + /* setup MC before calling post tables */ + rs400_mc_program(rdev); /* Reset gpu before posting otherwise ATOM will enter infinite loop */ if (radeon_gpu_reset(rdev)) { dev_warn(rdev->dev, "GPU reset failed ! (0xE40=0x%08X, 0x7C0=0x%08X)\n", -- cgit v0.10.2 From 52a2b11cafb1b14bacfc65a20966da5ba3a863e1 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Thu, 1 Oct 2009 15:48:40 -0700 Subject: ACPI: clean up video.c boundary checks and types proc.c and video.c are a bit sloppy around types and style, confusing gcc for a new feature that'll be in 2.6.33 and will cause a warning on the current code. This patch changes if (foo + 1 > sizeof bar) into if (foo >= sizeof(bar)) which is more kernel-style. it also changes a variable in proc.c to unsigned; it gets assigned a value from an unsigned type, and is then only compared for > not for negative, so using unsigned is just outright the right type Signed-off-by: Arjan van de Ven Signed-off-by: Len Brown diff --git a/drivers/acpi/proc.c b/drivers/acpi/proc.c index f8b6f55..d0d25e2 100644 --- a/drivers/acpi/proc.c +++ b/drivers/acpi/proc.c @@ -393,7 +393,7 @@ acpi_system_write_wakeup_device(struct file *file, struct list_head *node, *next; char strbuf[5]; char str[5] = ""; - int len = count; + unsigned int len = count; struct acpi_device *found_dev = NULL; if (len > 4) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 64e3c58..05dff63 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -1223,7 +1223,7 @@ acpi_video_device_write_state(struct file *file, u32 state = 0; - if (!dev || count + 1 > sizeof str) + if (!dev || count >= sizeof(str)) return -EINVAL; if (copy_from_user(str, buffer, count)) @@ -1280,7 +1280,7 @@ acpi_video_device_write_brightness(struct file *file, int i; - if (!dev || !dev->brightness || count + 1 > sizeof str) + if (!dev || !dev->brightness || count >= sizeof(str)) return -EINVAL; if (copy_from_user(str, buffer, count)) @@ -1562,7 +1562,7 @@ acpi_video_bus_write_POST(struct file *file, unsigned long long opt, options; - if (!video || count + 1 > sizeof str) + if (!video || count >= sizeof(str)) return -EINVAL; status = acpi_video_bus_POST_options(video, &options); @@ -1602,7 +1602,7 @@ acpi_video_bus_write_DOS(struct file *file, unsigned long opt; - if (!video || count + 1 > sizeof str) + if (!video || count >= sizeof(str)) return -EINVAL; if (copy_from_user(str, buffer, count)) -- cgit v0.10.2 From ca0207114f1708b563f510b7781a360ec5b98359 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Wed, 28 Oct 2009 18:02:26 +0100 Subject: x86/amd-iommu: Un__init function required on shutdown The function iommu_feature_disable is required on system shutdown to disable the IOMMU but it is marked as __init. This may result in a panic if the memory is reused. This patch fixes this bug. Signed-off-by: Joerg Roedel diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c index 498c8c7..1e423b2 100644 --- a/arch/x86/kernel/amd_iommu_init.c +++ b/arch/x86/kernel/amd_iommu_init.c @@ -240,7 +240,7 @@ static void iommu_feature_enable(struct amd_iommu *iommu, u8 bit) writel(ctrl, iommu->mmio_base + MMIO_CONTROL_OFFSET); } -static void __init iommu_feature_disable(struct amd_iommu *iommu, u8 bit) +static void iommu_feature_disable(struct amd_iommu *iommu, u8 bit) { u32 ctrl; -- cgit v0.10.2 From e3d8024891dbfec6cf36c9b76177650f48118462 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 22 Sep 2009 16:48:56 +0100 Subject: ARM: S3C: Add info for supporting circular DMA buffers The S3C64XX DMA implementation will work a lot better with the ability to enqueue circular buffers as the hardware can do it's own linked-list management. Add a function s3c_dma_has_circular() to show that the system can do this and a flag for the channel. Update the s3c24xx/s3c64xx I2S DMA code to deal with this. Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks Acked-by: Mark Brown diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h index c3a2629..92e2687 100644 --- a/arch/arm/mach-s3c2410/include/mach/dma.h +++ b/arch/arm/mach-s3c2410/include/mach/dma.h @@ -110,6 +110,8 @@ enum s3c2410_dma_loadst { * waiting for reloads */ #define S3C2410_DMAF_AUTOSTART (1<<1) /* auto-start if buffer queued */ +#define S3C2410_DMAF_CIRCULAR (1 << 2) /* no circular dma support */ + /* dma buffer */ struct s3c2410_dma_buf; @@ -194,4 +196,9 @@ struct s3c2410_dma_chan { typedef unsigned long dma_device_t; +static inline bool s3c_dma_has_circular(void) +{ + return false; +} + #endif /* __ASM_ARCH_DMA_H */ diff --git a/arch/arm/mach-s3c6400/include/mach/dma.h b/arch/arm/mach-s3c6400/include/mach/dma.h index 1067619..004edab 100644 --- a/arch/arm/mach-s3c6400/include/mach/dma.h +++ b/arch/arm/mach-s3c6400/include/mach/dma.h @@ -68,6 +68,11 @@ static __inline__ int s3c_dma_has_circular(void) #define S3C2410_DMAF_CIRCULAR (1 << 0) +static inline bool s3c_dma_has_circular(void) +{ + return false; +} + #include #endif /* __ASM_ARCH_IRQ_H */ diff --git a/sound/soc/s3c24xx/s3c24xx-pcm.c b/sound/soc/s3c24xx/s3c24xx-pcm.c index 5cbbdc8..1f35c6f 100644 --- a/sound/soc/s3c24xx/s3c24xx-pcm.c +++ b/sound/soc/s3c24xx/s3c24xx-pcm.c @@ -75,11 +75,19 @@ static void s3c24xx_pcm_enqueue(struct snd_pcm_substream *substream) { struct s3c24xx_runtime_data *prtd = substream->runtime->private_data; dma_addr_t pos = prtd->dma_pos; + unsigned int limit; int ret; pr_debug("Entered %s\n", __func__); - while (prtd->dma_loaded < prtd->dma_limit) { + if (s3c_dma_has_circular()) { + limit = (prtd->dma_end - prtd->dma_start) / prtd->dma_period; + } else + limit = prtd->dma_limit; + + pr_debug("%s: loaded %d, limit %d\n", __func__, prtd->dma_loaded, limit); + + while (prtd->dma_loaded < limit) { unsigned long len = prtd->dma_period; pr_debug("dma_loaded: %d\n", prtd->dma_loaded); @@ -123,7 +131,7 @@ static void s3c24xx_audio_buffdone(struct s3c2410_dma_chan *channel, snd_pcm_period_elapsed(substream); spin_lock(&prtd->lock); - if (prtd->state & ST_RUNNING) { + if (prtd->state & ST_RUNNING && !s3c_dma_has_circular()) { prtd->dma_loaded--; s3c24xx_pcm_enqueue(substream); } @@ -164,6 +172,11 @@ static int s3c24xx_pcm_hw_params(struct snd_pcm_substream *substream, printk(KERN_ERR "failed to get dma channel\n"); return ret; } + + /* use the circular buffering if we have it available. */ + if (s3c_dma_has_circular()) + s3c2410_dma_setflags(prtd->params->channel, + S3C2410_DMAF_CIRCULAR); } s3c2410_dma_set_buffdone_fn(prtd->params->channel, -- cgit v0.10.2 From b4719cd62707ca6f1a4d55b89066a7b9acc72347 Mon Sep 17 00:00:00 2001 From: Ramax Lo Date: Tue, 22 Sep 2009 00:04:16 +0800 Subject: ARM: S3C24XX: Define a macro to avoid compilation error MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Define a macro to avoid the following error during kernel build process for platforms other than s3c2410: arch/arm/plat-s3c24xx/cpu.c:84: error: ‘s3c2410a_init’ undeclared here (not in a function) Signed-off-by: Ramax Lo Signed-off-by: Ben Dooks diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h index b6deeef..82ab4aad 100644 --- a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h +++ b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h @@ -27,6 +27,7 @@ extern void s3c2410_init_clocks(int xtal); #define s3c2410_init_uarts NULL #define s3c2410_map_io NULL #define s3c2410_init NULL +#define s3c2410a_init NULL #endif extern int s3c2410_baseclk_add(void); -- cgit v0.10.2 From f5fb9b1a15285fde54c6b70cf35d328333e5b519 Mon Sep 17 00:00:00 2001 From: Harald Welte Date: Tue, 22 Sep 2009 21:40:39 +0100 Subject: ARM: S3C24XX: Introduce S3C2442B CPU Add the S3C2442B CPU ID to aid support the Openmoko GTA02 / Freerunner. Signed-off-by: Harald Welte Signed-off-by: Andy Green Signed-off-by: Nelson Castillo [ben-linux@fluff.org: edit description for clarity and S3C2442B as uppercase] Signed-off-by: Ben Dooks diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c index 5447e60..4af9dd9 100644 --- a/arch/arm/plat-s3c24xx/cpu.c +++ b/arch/arm/plat-s3c24xx/cpu.c @@ -61,6 +61,7 @@ static const char name_s3c2410[] = "S3C2410"; static const char name_s3c2412[] = "S3C2412"; static const char name_s3c2440[] = "S3C2440"; static const char name_s3c2442[] = "S3C2442"; +static const char name_s3c2442b[] = "S3C2442B"; static const char name_s3c2443[] = "S3C2443"; static const char name_s3c2410a[] = "S3C2410A"; static const char name_s3c2440a[] = "S3C2440A"; @@ -112,6 +113,15 @@ static struct cpu_table cpu_ids[] __initdata = { .name = name_s3c2442 }, { + .idcode = 0x32440aab, + .idmask = 0xffffffff, + .map_io = s3c244x_map_io, + .init_clocks = s3c244x_init_clocks, + .init_uarts = s3c244x_init_uarts, + .init = s3c2442_init, + .name = name_s3c2442b + }, + { .idcode = 0x32412001, .idmask = 0xffffffff, .map_io = s3c2412_map_io, -- cgit v0.10.2 From 2e31de6511a47738974d6b48fdc60c4f82f80d24 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 14 Oct 2009 10:13:22 +0100 Subject: ARM: S3C2410: Fix link if CONFIG_S3C2410_IOTIMING is not set Fix the link errors if cpu-frequency support is enabled on s3c2410 systems but there is no CONFIG_S3C2410_IOTIMING set. Fix this by ensuring the relevant symbols are defined NULL if the code is not being built in. Fixes the following error: arch/arm/mach-s3c2410/built-in.o: undefined reference to `s3c2410_iotiming_get' arch/arm/mach-s3c2410/built-in.o: undefined reference to `s3c2410_iotiming_set' arch/arm/mach-s3c2410/built-in.o: undefined reference to `s3c2410_iotiming_calc' Signed-off-by: Ben Dooks diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h index efeb025..c776120 100644 --- a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h +++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h @@ -222,7 +222,9 @@ extern struct clk *s3c_cpufreq_clk_get(struct device *, const char *); /* S3C2410 and compatible exported functions */ extern void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg); +extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg); +#ifdef CONFIG_S3C2410_IOTIMING extern int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg, struct s3c_iotimings *iot); @@ -231,8 +233,11 @@ extern int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg, extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg, struct s3c_iotimings *iot); - -extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg); +#else +#define s3c2410_iotiming_calc NULL +#define s3c2410_iotiming_get NULL +#define s3c2410_iotiming_set NULL +#endif /* CONFIG_S3C2410_IOTIMING */ /* S3C2412 compatible routines */ -- cgit v0.10.2 From d3bf3956c75b38def079fb6db40b5cf3f1466a93 Mon Sep 17 00:00:00 2001 From: Ryan Mallon Date: Wed, 14 Oct 2009 09:18:30 +1300 Subject: ARM: S3C: Fix adc function exports Fix the export of s3c_adc_read. Signed-off-by: Ryan Mallon [ben-linux@fluff.org: remove unexport of s3c_adc_start, needed for ts] Signed-off-by: Ben Dooks diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c index 4d36b78..df47322 100644 --- a/arch/arm/plat-s3c24xx/adc.c +++ b/arch/arm/plat-s3c24xx/adc.c @@ -189,7 +189,7 @@ int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch) err: return ret; } -EXPORT_SYMBOL_GPL(s3c_adc_convert); +EXPORT_SYMBOL_GPL(s3c_adc_read); static void s3c_adc_default_select(struct s3c_adc_client *client, unsigned select) -- cgit v0.10.2 From 60e5c1b5ecd99e06d3133a2a20d58d3c2b9968ac Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 17 Oct 2009 08:42:49 +0200 Subject: ARM: S3C24XX: arch/arm/plat-s3c24xx: Move dereference after NULL test If the NULL test on buf is needed, then the dereference should be after the NULL test. A simplified version of the semantic match that detects this problem is as follows (http://coccinelle.lip6.fr/): // @match exists@ expression x, E; identifier fld; @@ * x->fld ... when != \(x = E\|&x\) * x == NULL // Signed-off-by: Julia Lawall Signed-off-by: Ben Dooks diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index 196b191..f046f8c 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -208,14 +208,14 @@ s3c2410_dma_loadbuffer(struct s3c2410_dma_chan *chan, { unsigned long reload; - pr_debug("s3c2410_chan_loadbuffer: loading buff %p (0x%08lx,0x%06x)\n", - buf, (unsigned long)buf->data, buf->size); - if (buf == NULL) { dmawarn("buffer is NULL\n"); return -EINVAL; } + pr_debug("s3c2410_chan_loadbuffer: loading buff %p (0x%08lx,0x%06x)\n", + buf, (unsigned long)buf->data, buf->size); + /* check the state of the channel before we do anything */ if (chan->load_state == S3C2410_DMALOAD_1LOADED) { -- cgit v0.10.2 From 0bfb34f3a168ee598164803ab3147dd41fc3f843 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 26 Oct 2009 20:37:21 +0000 Subject: ARM: S3C2440: mini2440: Fix missing CONFIG_S3C_DEV_USB_HOST Fix missing select of S3C_DEV_USB_HOST when building for mini2440 only. Fixes the following error: built-in.o: undefined reference to `s3c_device_usb` Signed-off-by: Ben Dooks diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig index d7bba91..a8b69d7 100644 --- a/arch/arm/mach-s3c2440/Kconfig +++ b/arch/arm/mach-s3c2440/Kconfig @@ -103,6 +103,7 @@ config MACH_MINI2440 select LEDS_TRIGGER_BACKLIGHT select SND_S3C24XX_SOC_S3C24XX_UDA134X select S3C_DEV_NAND + select S3C_DEV_USB_HOST help Say Y here to select support for the MINI2440. Is a 10cm x 10cm board available via various sources. It can come with a 3.5" or 7" touch LCD. -- cgit v0.10.2 From 365854af7e393591d980998dec350b6d9ee695ee Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 26 Oct 2009 21:17:15 +0000 Subject: ARM: S3C24XX: Fix warnings in arch/arm/plat-s3c24xx/gpio.c Fix the following warnings from sparse in arch/arm/plat-s3c24xx/gpio. due to the missing include of gpio.c:36:6: warning: symbol 's3c2410_gpio_cfgpin' was not declared. Should it be static? gpio.c:84:14: warning: symbol 's3c2410_gpio_getcfg' was not declared. Should it be static? gpio.c:103:6: warning: symbol 's3c2410_gpio_pullup' was not declared. Should it be static? gpio.c:125:5: warning: symbol 's3c2410_gpio_getpull' was not declared. Should it be static? gpio.c:138:6: warning: symbol 's3c2410_gpio_setpin' was not declared. Should it be static? gpio.c:157:14: warning: symbol 's3c2410_gpio_getpin' was not declared. Should it be static? gpio.c:184:5: warning: symbol 's3c2410_gpio_getirq' was not declared. Should it be static? Signed-off-by: Ben Dooks diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c index 95df059..5467470 100644 --- a/arch/arm/plat-s3c24xx/gpio.c +++ b/arch/arm/plat-s3c24xx/gpio.c @@ -29,6 +29,7 @@ #include #include +#include #include #include -- cgit v0.10.2 From 0070994783cc7953416cf5da2e190c05edb01391 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 26 Oct 2009 21:19:27 +0000 Subject: ARM: S3C2440: mini2440: Fix spare warnings Fix the following sparse warnings in arch/arm/mach-s3c2440/mach-mini2440.c due to missing 'static'. warning: symbol 'mini2440_lcd_cfg' was not declared. Should it be static? warning: symbol 'mini2440_fb_info' was not declared. Should it be static? Signed-off-by: Ben Dooks diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c index ec71a69..1c3382f 100644 --- a/arch/arm/mach-s3c2440/mach-mini2440.c +++ b/arch/arm/mach-s3c2440/mach-mini2440.c @@ -144,7 +144,7 @@ static struct s3c2410_udc_mach_info mini2440_udc_cfg __initdata = { .type = (S3C2410_LCDCON1_TFT16BPP |\ S3C2410_LCDCON1_TFT) -struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = { +static struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = { [0] = { /* mini2440 + 3.5" TFT + touchscreen */ _LCD_DECLARE( 7, /* The 3.5 is quite fast */ @@ -191,7 +191,7 @@ struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = { #define S3C2410_GPCCON_MASK(x) (3 << ((x) * 2)) #define S3C2410_GPDCON_MASK(x) (3 << ((x) * 2)) -struct s3c2410fb_mach_info mini2440_fb_info __initdata = { +static struct s3c2410fb_mach_info mini2440_fb_info __initdata = { .displays = &mini2440_lcd_cfg[0], /* not constant! see init */ .num_displays = 1, .default_display = 0, -- cgit v0.10.2 From 620abe28776d8cec0a275fac25e254c1f0bc1c73 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 26 Oct 2009 21:21:32 +0000 Subject: ARM: S3C2410: Fix sparse warnings in arch/arm/mach-s3c2410/gpio.c Fix sparse warning in arch/arm/mach-s3c2410/gpio.c due to missing include of . Fixes the following warning: warning: symbol 's3c2410_gpio_irqfilter' was not declared. Should it be static? Signed-off-by: Ben Dooks diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c index 7974afc..9664e01 100644 --- a/arch/arm/mach-s3c2410/gpio.c +++ b/arch/arm/mach-s3c2410/gpio.c @@ -28,6 +28,7 @@ #include #include +#include #include #include -- cgit v0.10.2 From 11df6dddcbc38affb7473aad3d962baf8414a947 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 28 Oct 2009 20:26:48 +0100 Subject: futex: Fix spurious wakeup for requeue_pi really The requeue_pi path doesn't use unqueue_me() (and the racy lock_ptr == NULL test) nor does it use the wake_list of futex_wake() which where the reason for commit 41890f2 (futex: Handle spurious wake up) See debugging discussing on LKML Message-ID: <4AD4080C.20703@us.ibm.com> The changes in this fix to the wait_requeue_pi path were considered to be a likely unecessary, but harmless safety net. But it turns out that due to the fact that for unknown $@#!*( reasons EWOULDBLOCK is defined as EAGAIN we built an endless loop in the code path which returns correctly EWOULDBLOCK. Spurious wakeups in wait_requeue_pi code path are unlikely so we do the easy solution and return EWOULDBLOCK^WEAGAIN to user space and let it deal with the spurious wakeup. Cc: Darren Hart Cc: Peter Zijlstra Cc: Eric Dumazet Cc: John Stultz Cc: Dinakar Guniguntala LKML-Reference: <4AE23C74.1090502@us.ibm.com> Cc: stable@kernel.org Signed-off-by: Thomas Gleixner diff --git a/kernel/futex.c b/kernel/futex.c index 642f3bb..fb65e82 100644 --- a/kernel/futex.c +++ b/kernel/futex.c @@ -2127,7 +2127,7 @@ int handle_early_requeue_pi_wakeup(struct futex_hash_bucket *hb, plist_del(&q->list, &q->list.plist); /* Handle spurious wakeups gracefully */ - ret = -EAGAIN; + ret = -EWOULDBLOCK; if (timeout && !timeout->task) ret = -ETIMEDOUT; else if (signal_pending(current)) @@ -2208,7 +2208,6 @@ static int futex_wait_requeue_pi(u32 __user *uaddr, int fshared, debug_rt_mutex_init_waiter(&rt_waiter); rt_waiter.task = NULL; -retry: key2 = FUTEX_KEY_INIT; ret = get_futex_key(uaddr2, fshared, &key2, VERIFY_WRITE); if (unlikely(ret != 0)) @@ -2303,9 +2302,6 @@ out_put_keys: out_key2: put_futex_key(fshared, &key2); - /* Spurious wakeup ? */ - if (ret == -EAGAIN) - goto retry; out: if (to) { hrtimer_cancel(&to->timer); -- cgit v0.10.2 From 3f0b3c33eeed400577b47fab8439ffe6f40aa97a Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Thu, 29 Oct 2009 15:04:07 +0100 Subject: [S390] call home: fix local buffer usage in proc handler Fix the size of the local buffer and use snprintf to prevent further miscalculations. Also fix the usage of bitwise vs logic operations. Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/char/sclp_async.c b/drivers/s390/char/sclp_async.c index a4f68e5..bf4a9f4 100644 --- a/drivers/s390/char/sclp_async.c +++ b/drivers/s390/char/sclp_async.c @@ -68,15 +68,14 @@ static int proc_handler_callhome(struct ctl_table *ctl, int write, { unsigned long val; int len, rc; - char buf[2]; + char buf[3]; - if (!*count | (*ppos && !write)) { + if (!*count || (*ppos && !write)) { *count = 0; return 0; } if (!write) { - len = sprintf(buf, "%d\n", callhome_enabled); - buf[len] = '\0'; + len = snprintf(buf, sizeof(buf), "%d\n", callhome_enabled); rc = copy_to_user(buffer, buf, sizeof(buf)); if (rc != 0) return -EFAULT; -- cgit v0.10.2 From 8ca45667f966968132c772ddbb6468b41a817c19 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Thu, 29 Oct 2009 15:04:08 +0100 Subject: [S390] s/r: cmm resume fix If a suspended z/VM guest has been logged off before the resume the 'SET SMSG IUCV' CP command need to be repeated to reenable sending message via SMSG. This fixes the following error: HCPMFS057I H4214002 not receiving; SMSG off Error: non-zero CP response for command 'SMSG H4214002 CMM SHRINK 5010': #57 Signed-off-by: Martin Schwidefsky Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/net/smsgiucv.c b/drivers/s390/net/smsgiucv.c index 102000d..3012355 100644 --- a/drivers/s390/net/smsgiucv.c +++ b/drivers/s390/net/smsgiucv.c @@ -158,7 +158,12 @@ static int smsg_pm_restore_thaw(struct device *dev) smsg_path->flags = 0; rc = iucv_path_connect(smsg_path, &smsg_handler, "*MSG ", NULL, NULL, NULL); - printk(KERN_ERR "iucv_path_connect returned with rc %i\n", rc); +#ifdef CONFIG_PM_DEBUG + if (rc) + printk(KERN_ERR + "iucv_path_connect returned with rc %i\n", rc); +#endif + cpcmd("SET SMSG IUCV", NULL, 0, NULL); } return 0; } -- cgit v0.10.2 From 4f8048ee734dab7c463574797b820c0c68c80791 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 29 Oct 2009 15:04:09 +0100 Subject: [S390] smp: fix prefix handling of offlined cpus Offlined cpus still have valid prefix register contents. Dumpers will store the register contents of a cpu to the location where its prefix register points to. For offlined cpus the area (lowcore) has been freed and the dumper would write the uninteresting contents of the offline cpu to a memory location which might be in use by some other component and destroy valueable information. To fix this set the prefix register of offline cpus to absolute address zero again. This prevents the current dumpers to write to random memory locations. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index c932caa..c699ac5 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -638,6 +638,8 @@ void __cpu_die(unsigned int cpu) /* Wait until target cpu is down */ while (!cpu_stopped(cpu)) cpu_relax(); + while (signal_processor_p(0, cpu, sigp_set_prefix) == sigp_busy) + udelay(10); smp_free_lowcore(cpu); pr_info("Processor %d stopped\n", cpu); } -- cgit v0.10.2 From 4a0fb4c44573759f878fc65f6ddbd46080748f8b Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 29 Oct 2009 15:04:10 +0100 Subject: [S390] call home: fix error handling in init function Fix missing unregister_sysctl_table in case the SCLP doesn't provide the requested feature. Also simplify the whole error handling while at it. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/char/sclp_async.c b/drivers/s390/char/sclp_async.c index bf4a9f4..3c20aa1 100644 --- a/drivers/s390/char/sclp_async.c +++ b/drivers/s390/char/sclp_async.c @@ -170,39 +170,31 @@ static int __init sclp_async_init(void) rc = sclp_register(&sclp_async_register); if (rc) return rc; - callhome_sysctl_header = register_sysctl_table(kern_dir_table); - if (!callhome_sysctl_header) { - rc = -ENOMEM; - goto out_sclp; - } - if (!(sclp_async_register.sclp_receive_mask & EVTYP_ASYNC_MASK)) { - rc = -EOPNOTSUPP; + rc = -EOPNOTSUPP; + if (!(sclp_async_register.sclp_receive_mask & EVTYP_ASYNC_MASK)) goto out_sclp; - } rc = -ENOMEM; + callhome_sysctl_header = register_sysctl_table(kern_dir_table); + if (!callhome_sysctl_header) + goto out_sclp; request = kzalloc(sizeof(struct sclp_req), GFP_KERNEL); - if (!request) - goto out_sys; sccb = (struct sclp_async_sccb *) get_zeroed_page(GFP_KERNEL | GFP_DMA); - if (!sccb) + if (!request || !sccb) goto out_mem; - rc = atomic_notifier_chain_register(&panic_notifier_list, - &call_home_panic_nb); + rc = atomic_notifier_chain_register(&panic_notifier_list, + &call_home_panic_nb); if (rc) goto out_mem; - strncpy(nodename, init_utsname()->nodename, 64); - return 0; - + goto out; out_mem: kfree(request); free_page((unsigned long) sccb); -out_sys: unregister_sysctl_table(callhome_sysctl_header); out_sclp: sclp_unregister(&sclp_async_register); +out: return rc; - } module_init(sclp_async_init); -- cgit v0.10.2 From e8a79c9ec779168502402a8b834abf8cf38a325a Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 29 Oct 2009 15:04:11 +0100 Subject: [S390] call home: fix string length handling After copying uts->nodename to the static nodename array the static version isn't necessarily zero termininated, since the size of the array is one byte too short. Afterwards doing strncat(data, nodename, strlen(nodename)); may copy an arbitrary large amount of bytes. Fix this by getting rid of the static array and using strncat with proper length limit. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/char/sclp_async.c b/drivers/s390/char/sclp_async.c index 3c20aa1..b44462a 100644 --- a/drivers/s390/char/sclp_async.c +++ b/drivers/s390/char/sclp_async.c @@ -26,7 +26,6 @@ static struct sclp_async_sccb *sccb; static int sclp_async_send_wait(char *message); static struct ctl_table_header *callhome_sysctl_header; static DEFINE_SPINLOCK(sclp_async_lock); -static char nodename[64]; #define SCLP_NORMAL_WRITE 0x00 struct async_evbuf { @@ -52,9 +51,10 @@ static struct sclp_register sclp_async_register = { static int call_home_on_panic(struct notifier_block *self, unsigned long event, void *data) { - strncat(data, nodename, strlen(nodename)); - sclp_async_send_wait(data); - return NOTIFY_DONE; + strncat(data, init_utsname()->nodename, + sizeof(init_utsname()->nodename)); + sclp_async_send_wait(data); + return NOTIFY_DONE; } static struct notifier_block call_home_panic_nb = { @@ -183,10 +183,8 @@ static int __init sclp_async_init(void) goto out_mem; rc = atomic_notifier_chain_register(&panic_notifier_list, &call_home_panic_nb); - if (rc) - goto out_mem; - strncpy(nodename, init_utsname()->nodename, 64); - goto out; + if (!rc) + goto out; out_mem: kfree(request); free_page((unsigned long) sccb); -- cgit v0.10.2 From 70f5dc514c0b183ee813dc3b3983b04891fd1e7a Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Thu, 29 Oct 2009 15:04:12 +0100 Subject: [S390] cputime: fix overflow on 31 bit systems The cputime_to_msecs / cputime_to_clock_t and cputime64_to_clock_t cause fixpoint divide exceptions if the cputime is too large. On a machine that collected 49.7 days worth of idle time reading from /proc/stat will generate oopses like this: Kernel BUG at 001b0c92 [verbose debug info unavailable] fixpoint divide exception: 0009 [#13] SMP Modules linked in: ipv6 CPU: 1 Tainted: G D 2.6.27.10 #5 Process cat (pid: 21352, task: 1fb34138, ksp: 1d2a3d98) Krnl PSW : 070c2000 801b0c92 (show_stat+0x2ca/0x68c) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:0 CC:2 PM:0 Krnl GPRS: 00000001 00001388 00000bb8 0015d2a1 00000000 00000000 000003e8 0001fd91 00000000 00000000 0000129d eecd2ff0 1cc533b9 0036f780 801b0bce 1d2a3cc0 Krnl Code: 801b0c86: f18890abf198 mvo 171(9,%r9),408(9,%r15) 801b0c8c: 98abf170 lm %r10,%r11,368(%r15) 801b0c90: 1da1 dr %r10,%r1 >801b0c92: 90abf170 stm %r10,%r11,368(%r15) 801b0c96: 98abf190 lm %r10,%r11,400(%r15) 801b0c9a: 1da1 dr %r10,%r1 801b0c9c: 90abf190 stm %r10,%r11,400(%r15) 801b0ca0: 18a3 lr %r10,%r3 Call Trace: ([<00000000001b09f4>] show_stat+0x2c/0x68c) [<000000000018dcee>] seq_read+0xb2/0x364 [<00000000001a9980>] proc_reg_read+0x68/0x98 [<00000000001705ee>] vfs_read+0x6e/0xe8 [<0000000000170732>] sys_read+0x36/0x78 [<000000000010f750>] sysc_do_restart+0x12/0x16 [<0000000077f3ad6a>] 0x77f3ad6a <4>---[ end trace 1436ea9559d3de9e ]--- Reported-by: Mike Frysinger Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/include/asm/cputime.h b/arch/s390/include/asm/cputime.h index 24b1244..f23961a 100644 --- a/arch/s390/include/asm/cputime.h +++ b/arch/s390/include/asm/cputime.h @@ -78,7 +78,7 @@ cputime64_to_jiffies64(cputime64_t cputime) static inline unsigned int cputime_to_msecs(const cputime_t cputime) { - return __div(cputime, 4096000); + return cputime_div(cputime, 4096000); } static inline cputime_t @@ -160,7 +160,7 @@ cputime_to_timeval(const cputime_t cputime, struct timeval *value) static inline clock_t cputime_to_clock_t(cputime_t cputime) { - return __div(cputime, 4096000000ULL / USER_HZ); + return cputime_div(cputime, 4096000000ULL / USER_HZ); } static inline cputime_t @@ -175,7 +175,7 @@ clock_t_to_cputime(unsigned long x) static inline clock_t cputime64_to_clock_t(cputime64_t cputime) { - return __div(cputime, 4096000000ULL / USER_HZ); + return cputime_div(cputime, 4096000000ULL / USER_HZ); } struct s390_idle_data { -- cgit v0.10.2 From f8501ba77d69c88a65e4ebbe03bdc65b1edb0b86 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 29 Oct 2009 15:04:13 +0100 Subject: [S390] smp: fix sigp stop handling According to the architecture a cpu must not necessarily enter stopped state after completion of a sigp instruction with "stop" order code. So remove the BUG() statement after self sending sigp stop to avoid that it ever gets reached. Also add a sigp busy check to make sure that the order gets delivered. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c index ee57a42..4890ac6 100644 --- a/arch/s390/kernel/ipl.c +++ b/arch/s390/kernel/ipl.c @@ -1595,10 +1595,9 @@ static void stop_run(struct shutdown_trigger *trigger) { if (strcmp(trigger->name, ON_PANIC_STR) == 0) disabled_wait((unsigned long) __builtin_return_address(0)); - else { - signal_processor(smp_processor_id(), sigp_stop); - for (;;); - } + while (signal_processor(smp_processor_id(), sigp_stop) == sigp_busy) + cpu_relax(); + for (;;); } static struct shutdown_action stop_action = {SHUTDOWN_ACTION_STOP_STR, diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index c699ac5..c99c45b 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -647,8 +647,8 @@ void __cpu_die(unsigned int cpu) void cpu_die(void) { idle_task_exit(); - signal_processor(smp_processor_id(), sigp_stop); - BUG(); + while (signal_processor(smp_processor_id(), sigp_stop) == sigp_busy) + cpu_relax(); for (;;); } diff --git a/arch/s390/kernel/swsusp_asm64.S b/arch/s390/kernel/swsusp_asm64.S index 7c8653e..0f4ef3b 100644 --- a/arch/s390/kernel/swsusp_asm64.S +++ b/arch/s390/kernel/swsusp_asm64.S @@ -199,6 +199,7 @@ pgm_check_entry: brc 2,4b /* busy, try again */ 5: sigp %r9,%r2,__SIGP_STOP /* stop resume (current) CPU */ + brc 2,5b /* busy, try again */ 6: j 6b restart_suspend: -- cgit v0.10.2 From b3dcf3de8e4d71d79235fc67b6c5def6506c27f8 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 29 Oct 2009 15:04:14 +0100 Subject: [S390] smp: fix sigp sense handling sigp sense only returns the status of a cpu if it is non zero. If the status of the sensed cpu is all zeros condition code 0 (accpeted) is set and no status bits are returned. The current code however assumes that a status was returned and tests bits in it. This means uninitalized data is accessed with random results. Worst case is that the code that checks if cpu is offline on cpu hotplug assumes that the target cpu is offline while it is still running. This leads potentially to memory corruption since resources that are still needed by the target cpu will be freed and could be resused while still in use. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index c99c45b..93e5203 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -76,7 +76,6 @@ static int cpu_stopped(int cpu) __u32 status; switch (signal_processor_ps(&status, 0, cpu, sigp_sense)) { - case sigp_order_code_accepted: case sigp_status_stored: /* Check for stopped and check stop state */ if (status & 0x50) diff --git a/arch/s390/kernel/swsusp_asm64.S b/arch/s390/kernel/swsusp_asm64.S index 0f4ef3b..0c26cc1 100644 --- a/arch/s390/kernel/swsusp_asm64.S +++ b/arch/s390/kernel/swsusp_asm64.S @@ -207,6 +207,7 @@ restart_suspend: llgh %r2,0(%r1) 7: sigp %r9,%r2,__SIGP_SENSE /* Wait for resume CPU */ + brc 8,7b /* accepted, status 0, still running */ brc 2,7b /* busy, try again */ tmll %r9,0x40 /* Test if resume CPU is stopped */ jz 7b -- cgit v0.10.2 From 59a40e70458341b35d123b60aca416a1d97ebbe3 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Thu, 29 Oct 2009 16:25:50 +0100 Subject: dma-debug: Fix compile warning with PAE enabled When PAE is enabled in the kernel configuration the size of phys_addr_t differs from the size of a void pointer. The gcc prints a warning about that in dma-debug code. This patch fixes the warning by converting the output to unsigned long long instead of a pointer. Signed-off-by: Joerg Roedel diff --git a/lib/dma-debug.c b/lib/dma-debug.c index 58a9f9f..ce6b7ea 100644 --- a/lib/dma-debug.c +++ b/lib/dma-debug.c @@ -819,9 +819,11 @@ static void check_unmap(struct dma_debug_entry *ref) err_printk(ref->dev, entry, "DMA-API: device driver frees " "DMA memory with different CPU address " "[device address=0x%016llx] [size=%llu bytes] " - "[cpu alloc address=%p] [cpu free address=%p]", + "[cpu alloc address=0x%016llx] " + "[cpu free address=0x%016llx]", ref->dev_addr, ref->size, - (void *)entry->paddr, (void *)ref->paddr); + (unsigned long long)entry->paddr, + (unsigned long long)ref->paddr); } if (ref->sg_call_ents && ref->type == dma_debug_sg && -- cgit v0.10.2 From 657e12fd388899502d47f9f6f9d276ec9ced8add Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 29 Oct 2009 17:06:17 +0000 Subject: ARM: Fix sparsemem with SPARSEMEM_EXTREME enabled When SPARSEMEM_EXTREME is enabled, memory_present() wants to use bootmem to allocate data structures. However, we call memory_present() after declaring memory to bootmem, but before we've reserved areas. This leads to sparsemem data structures being overwritten later in the kernel's initialization (when slab initializes.) Signed-off-by: Russell King diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 40940d7..52c40d1 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -273,7 +273,6 @@ static void __init bootmem_init_node(int node, struct meminfo *mi, struct membank *bank = &mi->bank[i]; if (!bank->highmem) free_bootmem_node(pgdat, bank_phys_start(bank), bank_phys_size(bank)); - memory_present(node, bank_pfn_start(bank), bank_pfn_end(bank)); } /* @@ -370,6 +369,19 @@ int pfn_valid(unsigned long pfn) return 0; } EXPORT_SYMBOL(pfn_valid); + +static void arm_memory_present(struct meminfo *mi, int node) +{ +} +#else +static void arm_memory_present(struct meminfo *mi, int node) +{ + int i; + for_each_nodebank(i, mi, node) { + struct membank *bank = &mi->bank[i]; + memory_present(node, bank_pfn_start(bank), bank_pfn_end(bank)); + } +} #endif static int __init meminfo_cmp(const void *_a, const void *_b) @@ -427,6 +439,12 @@ void __init bootmem_init(void) */ if (node == initrd_node) bootmem_reserve_initrd(node); + + /* + * Sparsemem tries to allocate bootmem in memory_present(), + * so must be done after the fixed reservations + */ + arm_memory_present(mi, node); } /* -- cgit v0.10.2 From df71dfd4ca01130f98d9dbfab76c440d72a177c6 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 24 Oct 2009 22:36:36 +0100 Subject: ARM: Fix errata 411920 workarounds Errata 411920 indicates that any "invalidate entire instruction cache" operation can fail if the right conditions are present. This is not limited just to those operations in flush.c, but elsewhere. Place the workaround in the already existing __flush_icache_all() function instead. Signed-off-by: Russell King diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index fd03fb6..3d0cdd2 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -414,9 +414,14 @@ extern void __flush_dcache_page(struct address_space *mapping, struct page *page static inline void __flush_icache_all(void) { +#ifdef CONFIG_ARM_ERRATA_411920 + extern void v6_icache_inval_all(void); + v6_icache_inval_all(); +#else asm("mcr p15, 0, %0, c7, c5, 0 @ invalidate I-cache\n" : : "r" (0)); +#endif } #define ARCH_HAS_FLUSH_ANON_PAGE diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c index 6bda76a..a9e22e3 100644 --- a/arch/arm/mm/context.c +++ b/arch/arm/mm/context.c @@ -50,10 +50,7 @@ void __new_context(struct mm_struct *mm) isb(); flush_tlb_all(); if (icache_is_vivt_asid_tagged()) { - asm("mcr p15, 0, %0, c7, c5, 0 @ invalidate I-cache\n" - "mcr p15, 0, %0, c7, c5, 6 @ flush BTAC/BTB\n" - : - : "r" (0)); + __flush_icache_all(); dsb(); } } diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index b279429..7f294f3 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -18,10 +18,6 @@ #include "mm.h" -#ifdef CONFIG_ARM_ERRATA_411920 -extern void v6_icache_inval_all(void); -#endif - #ifdef CONFIG_CPU_CACHE_VIPT #define ALIAS_FLUSH_START 0xffff4000 @@ -35,16 +31,11 @@ static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr) flush_tlb_kernel_page(to); asm( "mcrr p15, 0, %1, %0, c14\n" - " mcr p15, 0, %2, c7, c10, 4\n" -#ifndef CONFIG_ARM_ERRATA_411920 - " mcr p15, 0, %2, c7, c5, 0\n" -#endif + " mcr p15, 0, %2, c7, c10, 4" : : "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES), "r" (zero) : "cc"); -#ifdef CONFIG_ARM_ERRATA_411920 - v6_icache_inval_all(); -#endif + __flush_icache_all(); } void flush_cache_mm(struct mm_struct *mm) @@ -57,16 +48,11 @@ void flush_cache_mm(struct mm_struct *mm) if (cache_is_vipt_aliasing()) { asm( "mcr p15, 0, %0, c7, c14, 0\n" - " mcr p15, 0, %0, c7, c10, 4\n" -#ifndef CONFIG_ARM_ERRATA_411920 - " mcr p15, 0, %0, c7, c5, 0\n" -#endif + " mcr p15, 0, %0, c7, c10, 4" : : "r" (0) : "cc"); -#ifdef CONFIG_ARM_ERRATA_411920 - v6_icache_inval_all(); -#endif + __flush_icache_all(); } } @@ -81,16 +67,11 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned if (cache_is_vipt_aliasing()) { asm( "mcr p15, 0, %0, c7, c14, 0\n" - " mcr p15, 0, %0, c7, c10, 4\n" -#ifndef CONFIG_ARM_ERRATA_411920 - " mcr p15, 0, %0, c7, c5, 0\n" -#endif + " mcr p15, 0, %0, c7, c10, 4" : : "r" (0) : "cc"); -#ifdef CONFIG_ARM_ERRATA_411920 - v6_icache_inval_all(); -#endif + __flush_icache_all(); } } -- cgit v0.10.2 From 8fbd962e39517dfb2bfd363eba4b51cdfa299593 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Thu, 29 Oct 2009 13:42:41 +0000 Subject: e100: e100_phy_init() isolates selected PHY, causes 10 second boot delay A change in how PHYs are electrically isolated caused all PHYs to be isolated followed by reverting that isolation for the selected PHY. Unfortunately, isolating the selected PHY for even a short period of time can result in DHCP negotiation taking more than 10 seconds on certain embedded configurations delaying boot time as reported by Bernhard Kaindl. This patch reverts the change to how PHYs are isolated yet still works around the issue for 82552 needing the selected PHY's BMCR register to be written after the unused PHYs are isolated. This code is moved below the setting of nic->phy ID in order to do the 82552-specific workaround. Cc: Bernhard Kaindl Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/e100.c b/drivers/net/e100.c index 679965c..d19b084 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -1426,19 +1426,31 @@ static int e100_phy_init(struct nic *nic) } else DPRINTK(HW, DEBUG, "phy_addr = %d\n", nic->mii.phy_id); - /* Isolate all the PHY ids */ - for (addr = 0; addr < 32; addr++) - mdio_write(netdev, addr, MII_BMCR, BMCR_ISOLATE); - /* Select the discovered PHY */ - bmcr &= ~BMCR_ISOLATE; - mdio_write(netdev, nic->mii.phy_id, MII_BMCR, bmcr); - /* Get phy ID */ id_lo = mdio_read(netdev, nic->mii.phy_id, MII_PHYSID1); id_hi = mdio_read(netdev, nic->mii.phy_id, MII_PHYSID2); nic->phy = (u32)id_hi << 16 | (u32)id_lo; DPRINTK(HW, DEBUG, "phy ID = 0x%08X\n", nic->phy); + /* Select the phy and isolate the rest */ + for (addr = 0; addr < 32; addr++) { + if (addr != nic->mii.phy_id) { + mdio_write(netdev, addr, MII_BMCR, BMCR_ISOLATE); + } else if (nic->phy != phy_82552_v) { + bmcr = mdio_read(netdev, addr, MII_BMCR); + mdio_write(netdev, addr, MII_BMCR, + bmcr & ~BMCR_ISOLATE); + } + } + /* + * Workaround for 82552: + * Clear the ISOLATE bit on selected phy_id last (mirrored on all + * other phy_id's) using bmcr value from addr discovery loop above. + */ + if (nic->phy == phy_82552_v) + mdio_write(netdev, nic->mii.phy_id, MII_BMCR, + bmcr & ~BMCR_ISOLATE); + /* Handle National tx phys */ #define NCS_PHY_MODEL_MASK 0xFFF0FFFF if ((nic->phy & NCS_PHY_MODEL_MASK) == phy_nsc_tx) { -- cgit v0.10.2 From f523d2114e93c559dbcf1b49d46b339fc0eda37a Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Thu, 29 Oct 2009 13:45:45 +0000 Subject: e1000e: config PHY via software after resets On PCH-based (82577/82578) and some ICH8-based parts (82566) there is an issue with the hardware automatically configuring the PHY with contents from the EEPROM after the PHY is reset, so do the configuration by the driver instead. This was already similarly done for some 82566 parts in e1000_phy_hw_reset_ich8lan() but needs to be done after other resets, so move the PHY configuration code to its own function and call after all PHY resets. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h index c0f185b..4741ef9 100644 --- a/drivers/net/e1000e/defines.h +++ b/drivers/net/e1000e/defines.h @@ -347,6 +347,7 @@ /* Extended Configuration Control and Size */ #define E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP 0x00000020 #define E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE 0x00000001 +#define E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE 0x00000008 #define E1000_EXTCNF_CTRL_SWFLAG 0x00000020 #define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK 0x00FF0000 #define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT 16 diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index b6388b9..095ffa5 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -124,9 +124,20 @@ #define SW_FLAG_TIMEOUT 1000 /* SW Semaphore flag timeout in milliseconds */ +/* SMBus Address Phy Register */ +#define HV_SMB_ADDR PHY_REG(768, 26) +#define HV_SMB_ADDR_PEC_EN 0x0200 +#define HV_SMB_ADDR_VALID 0x0080 + +/* Strapping Option Register - RO */ +#define E1000_STRAP 0x0000C +#define E1000_STRAP_SMBUS_ADDRESS_MASK 0x00FE0000 +#define E1000_STRAP_SMBUS_ADDRESS_SHIFT 17 + /* OEM Bits Phy Register */ #define HV_OEM_BITS PHY_REG(768, 25) #define HV_OEM_BITS_LPLU 0x0004 /* Low Power Link Up */ +#define HV_OEM_BITS_GBE_DIS 0x0040 /* Gigabit Disable */ #define HV_OEM_BITS_RESTART_AN 0x0400 /* Restart Auto-negotiation */ /* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */ @@ -208,6 +219,7 @@ static s32 e1000_cleanup_led_pchlan(struct e1000_hw *hw); static s32 e1000_led_on_pchlan(struct e1000_hw *hw); static s32 e1000_led_off_pchlan(struct e1000_hw *hw); static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active); +static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw); static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg) { @@ -794,6 +806,191 @@ static s32 e1000_phy_force_speed_duplex_ich8lan(struct e1000_hw *hw) } /** + * e1000_sw_lcd_config_ich8lan - SW-based LCD Configuration + * @hw: pointer to the HW structure + * + * SW should configure the LCD from the NVM extended configuration region + * as a workaround for certain parts. + **/ +static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + u32 i, data, cnf_size, cnf_base_addr, sw_cfg_mask; + s32 ret_val; + u16 word_addr, reg_data, reg_addr, phy_page = 0; + + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + return ret_val; + + /* + * Initialize the PHY from the NVM on ICH platforms. This + * is needed due to an issue where the NVM configuration is + * not properly autoloaded after power transitions. + * Therefore, after each PHY reset, we will load the + * configuration data out of the NVM manually. + */ + if ((hw->mac.type == e1000_ich8lan && phy->type == e1000_phy_igp_3) || + (hw->mac.type == e1000_pchlan)) { + struct e1000_adapter *adapter = hw->adapter; + + /* Check if SW needs to configure the PHY */ + if ((adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M_AMT) || + (adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M) || + (hw->mac.type == e1000_pchlan)) + sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG_ICH8M; + else + sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG; + + data = er32(FEXTNVM); + if (!(data & sw_cfg_mask)) + goto out; + + /* Wait for basic configuration completes before proceeding */ + e1000_lan_init_done_ich8lan(hw); + + /* + * Make sure HW does not configure LCD from PHY + * extended configuration before SW configuration + */ + data = er32(EXTCNF_CTRL); + if (data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE) + goto out; + + cnf_size = er32(EXTCNF_SIZE); + cnf_size &= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK; + cnf_size >>= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT; + if (!cnf_size) + goto out; + + cnf_base_addr = data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK; + cnf_base_addr >>= E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT; + + if (!(data & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE) && + (hw->mac.type == e1000_pchlan)) { + /* + * HW configures the SMBus address and LEDs when the + * OEM and LCD Write Enable bits are set in the NVM. + * When both NVM bits are cleared, SW will configure + * them instead. + */ + data = er32(STRAP); + data &= E1000_STRAP_SMBUS_ADDRESS_MASK; + reg_data = data >> E1000_STRAP_SMBUS_ADDRESS_SHIFT; + reg_data |= HV_SMB_ADDR_PEC_EN | HV_SMB_ADDR_VALID; + ret_val = e1000_write_phy_reg_hv_locked(hw, HV_SMB_ADDR, + reg_data); + if (ret_val) + goto out; + + data = er32(LEDCTL); + ret_val = e1000_write_phy_reg_hv_locked(hw, + HV_LED_CONFIG, + (u16)data); + if (ret_val) + goto out; + } + /* Configure LCD from extended configuration region. */ + + /* cnf_base_addr is in DWORD */ + word_addr = (u16)(cnf_base_addr << 1); + + for (i = 0; i < cnf_size; i++) { + ret_val = e1000_read_nvm(hw, (word_addr + i * 2), 1, + ®_data); + if (ret_val) + goto out; + + ret_val = e1000_read_nvm(hw, (word_addr + i * 2 + 1), + 1, ®_addr); + if (ret_val) + goto out; + + /* Save off the PHY page for future writes. */ + if (reg_addr == IGP01E1000_PHY_PAGE_SELECT) { + phy_page = reg_data; + continue; + } + + reg_addr &= PHY_REG_MASK; + reg_addr |= phy_page; + + ret_val = phy->ops.write_phy_reg_locked(hw, + (u32)reg_addr, + reg_data); + if (ret_val) + goto out; + } + } + +out: + hw->phy.ops.release_phy(hw); + return ret_val; +} + +/** + * e1000_oem_bits_config_ich8lan - SW-based LCD Configuration + * @hw: pointer to the HW structure + * @d0_state: boolean if entering d0 or d3 device state + * + * SW will configure Gbe Disable and LPLU based on the NVM. The four bits are + * collectively called OEM bits. The OEM Write Enable bit and SW Config bit + * in NVM determines whether HW should configure LPLU and Gbe Disable. + **/ +static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state) +{ + s32 ret_val = 0; + u32 mac_reg; + u16 oem_reg; + + if (hw->mac.type != e1000_pchlan) + return ret_val; + + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + return ret_val; + + mac_reg = er32(EXTCNF_CTRL); + if (mac_reg & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE) + goto out; + + mac_reg = er32(FEXTNVM); + if (!(mac_reg & E1000_FEXTNVM_SW_CONFIG_ICH8M)) + goto out; + + mac_reg = er32(PHY_CTRL); + + ret_val = hw->phy.ops.read_phy_reg_locked(hw, HV_OEM_BITS, &oem_reg); + if (ret_val) + goto out; + + oem_reg &= ~(HV_OEM_BITS_GBE_DIS | HV_OEM_BITS_LPLU); + + if (d0_state) { + if (mac_reg & E1000_PHY_CTRL_GBE_DISABLE) + oem_reg |= HV_OEM_BITS_GBE_DIS; + + if (mac_reg & E1000_PHY_CTRL_D0A_LPLU) + oem_reg |= HV_OEM_BITS_LPLU; + } else { + if (mac_reg & E1000_PHY_CTRL_NOND0A_GBE_DISABLE) + oem_reg |= HV_OEM_BITS_GBE_DIS; + + if (mac_reg & E1000_PHY_CTRL_NOND0A_LPLU) + oem_reg |= HV_OEM_BITS_LPLU; + } + /* Restart auto-neg to activate the bits */ + oem_reg |= HV_OEM_BITS_RESTART_AN; + ret_val = hw->phy.ops.write_phy_reg_locked(hw, HV_OEM_BITS, oem_reg); + +out: + hw->phy.ops.release_phy(hw); + + return ret_val; +} + + +/** * e1000_hv_phy_workarounds_ich8lan - A series of Phy workarounds to be * done after every PHY reset. **/ @@ -882,11 +1079,8 @@ static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw) **/ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw) { - struct e1000_phy_info *phy = &hw->phy; - u32 i; - u32 data, cnf_size, cnf_base_addr, sw_cfg_mask; - s32 ret_val; - u16 reg, word_addr, reg_data, reg_addr, phy_page = 0; + s32 ret_val = 0; + u16 reg; ret_val = e1000e_phy_hw_reset_generic(hw); if (ret_val) @@ -905,81 +1099,16 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw) if (hw->mac.type == e1000_pchlan) e1e_rphy(hw, BM_WUC, ®); - /* - * Initialize the PHY from the NVM on ICH platforms. This - * is needed due to an issue where the NVM configuration is - * not properly autoloaded after power transitions. - * Therefore, after each PHY reset, we will load the - * configuration data out of the NVM manually. - */ - if (hw->mac.type == e1000_ich8lan && phy->type == e1000_phy_igp_3) { - struct e1000_adapter *adapter = hw->adapter; - - /* Check if SW needs configure the PHY */ - if ((adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M_AMT) || - (adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M)) - sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG_ICH8M; - else - sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG; - - data = er32(FEXTNVM); - if (!(data & sw_cfg_mask)) - return 0; - - /* Wait for basic configuration completes before proceeding */ - e1000_lan_init_done_ich8lan(hw); - - /* - * Make sure HW does not configure LCD from PHY - * extended configuration before SW configuration - */ - data = er32(EXTCNF_CTRL); - if (data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE) - return 0; - - cnf_size = er32(EXTCNF_SIZE); - cnf_size &= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK; - cnf_size >>= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT; - if (!cnf_size) - return 0; - - cnf_base_addr = data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK; - cnf_base_addr >>= E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT; - - /* Configure LCD from extended configuration region. */ - - /* cnf_base_addr is in DWORD */ - word_addr = (u16)(cnf_base_addr << 1); - - for (i = 0; i < cnf_size; i++) { - ret_val = e1000_read_nvm(hw, - (word_addr + i * 2), - 1, - ®_data); - if (ret_val) - return ret_val; - - ret_val = e1000_read_nvm(hw, - (word_addr + i * 2 + 1), - 1, - ®_addr); - if (ret_val) - return ret_val; - - /* Save off the PHY page for future writes. */ - if (reg_addr == IGP01E1000_PHY_PAGE_SELECT) { - phy_page = reg_data; - continue; - } - - reg_addr |= phy_page; + /* Configure the LCD with the extended configuration region in NVM */ + ret_val = e1000_sw_lcd_config_ich8lan(hw); + if (ret_val) + goto out; - ret_val = e1e_wphy(hw, (u32)reg_addr, reg_data); - if (ret_val) - return ret_val; - } - } + /* Configure the LCD with the OEM bits in NVM */ + if (hw->mac.type == e1000_pchlan) + ret_val = e1000_oem_bits_config_ich8lan(hw, true); +out: return 0; } @@ -2386,6 +2515,15 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) if (hw->mac.type == e1000_pchlan) e1e_rphy(hw, BM_WUC, ®); + ret_val = e1000_sw_lcd_config_ich8lan(hw); + if (ret_val) + goto out; + + if (hw->mac.type == e1000_pchlan) { + ret_val = e1000_oem_bits_config_ich8lan(hw, true); + if (ret_val) + goto out; + } /* * For PCH, this write will make sure that any noise * will be detected as a CRC error and be dropped rather than show up @@ -2404,6 +2542,7 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) if (hw->mac.type == e1000_pchlan) ret_val = e1000_hv_phy_workarounds_ich8lan(hw); +out: return ret_val; } -- cgit v0.10.2 From 1d5846b9216665d0ae743bf351d0b8fa90c40523 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Thu, 29 Oct 2009 13:46:05 +0000 Subject: e1000e: rework disable K1 at 1000Mbps for 82577/82578 This patch reworks a previous workaround (commit 7d3cabbcc) for an issue in hardware where noise on the interconnect between the MAC and PHY could be generated by a lower power mode (K1) at 1000Mbps resulting in bad packets. Disable K1 while at 1000 Mbps but keep it enabled for 10/100Mbps and when the cable is disconnected. The original version of this workaround was found to be incomplete. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h index 4741ef9..1190167 100644 --- a/drivers/net/e1000e/defines.h +++ b/drivers/net/e1000e/defines.h @@ -76,6 +76,7 @@ /* Extended Device Control */ #define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Definable Pin 7 */ #define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */ +#define E1000_CTRL_EXT_SPD_BYPS 0x00008000 /* Speed Select Bypass */ #define E1000_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */ #define E1000_CTRL_EXT_DMA_DYN_CLK_EN 0x00080000 /* DMA Dynamic Clock Gating */ #define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000 diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index 405a144..189dfa2 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -141,6 +141,20 @@ struct e1000_info; #define HV_TNCRS_UPPER PHY_REG(778, 29) /* Transmit with no CRS */ #define HV_TNCRS_LOWER PHY_REG(778, 30) +/* BM PHY Copper Specific Status */ +#define BM_CS_STATUS 17 +#define BM_CS_STATUS_LINK_UP 0x0400 +#define BM_CS_STATUS_RESOLVED 0x0800 +#define BM_CS_STATUS_SPEED_MASK 0xC000 +#define BM_CS_STATUS_SPEED_1000 0x8000 + +/* 82577 Mobile Phy Status Register */ +#define HV_M_STATUS 26 +#define HV_M_STATUS_AUTONEG_COMPLETE 0x1000 +#define HV_M_STATUS_SPEED_MASK 0x0300 +#define HV_M_STATUS_SPEED_1000 0x0200 +#define HV_M_STATUS_LINK_UP 0x0040 + enum e1000_boards { board_82571, board_82572, diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h index 7b05cf4..aaea41e 100644 --- a/drivers/net/e1000e/hw.h +++ b/drivers/net/e1000e/hw.h @@ -903,6 +903,7 @@ struct e1000_shadow_ram { struct e1000_dev_spec_ich8lan { bool kmrn_lock_loss_workaround_enabled; struct e1000_shadow_ram shadow_ram[E1000_ICH8_SHADOW_RAM_WORDS]; + bool nvm_k1_enabled; }; struct e1000_hw { diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 095ffa5..51ddb04 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -140,6 +140,9 @@ #define HV_OEM_BITS_GBE_DIS 0x0040 /* Gigabit Disable */ #define HV_OEM_BITS_RESTART_AN 0x0400 /* Restart Auto-negotiation */ +#define E1000_NVM_K1_CONFIG 0x1B /* NVM K1 Config Word */ +#define E1000_NVM_K1_ENABLE 0x1 /* NVM Enable K1 bit */ + /* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */ /* Offset 04h HSFSTS */ union ich8_hws_flash_status { @@ -220,6 +223,8 @@ static s32 e1000_led_on_pchlan(struct e1000_hw *hw); static s32 e1000_led_off_pchlan(struct e1000_hw *hw); static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active); static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw); +static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link); +static s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable); static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg) { @@ -495,14 +500,6 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) goto out; } - if (hw->mac.type == e1000_pchlan) { - ret_val = e1000e_write_kmrn_reg(hw, - E1000_KMRNCTRLSTA_K1_CONFIG, - E1000_KMRNCTRLSTA_K1_ENABLE); - if (ret_val) - goto out; - } - /* * First we want to see if the MII Status Register reports * link. If so, then we want to get the current speed/duplex @@ -512,6 +509,12 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) if (ret_val) goto out; + if (hw->mac.type == e1000_pchlan) { + ret_val = e1000_k1_gig_workaround_hv(hw, link); + if (ret_val) + goto out; + } + if (!link) goto out; /* No link detected */ @@ -929,6 +932,141 @@ out: } /** + * e1000_k1_gig_workaround_hv - K1 Si workaround + * @hw: pointer to the HW structure + * @link: link up bool flag + * + * If K1 is enabled for 1Gbps, the MAC might stall when transitioning + * from a lower speed. This workaround disables K1 whenever link is at 1Gig + * If link is down, the function will restore the default K1 setting located + * in the NVM. + **/ +static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link) +{ + s32 ret_val = 0; + u16 status_reg = 0; + bool k1_enable = hw->dev_spec.ich8lan.nvm_k1_enabled; + + if (hw->mac.type != e1000_pchlan) + goto out; + + /* Wrap the whole flow with the sw flag */ + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + goto out; + + /* Disable K1 when link is 1Gbps, otherwise use the NVM setting */ + if (link) { + if (hw->phy.type == e1000_phy_82578) { + ret_val = hw->phy.ops.read_phy_reg_locked(hw, + BM_CS_STATUS, + &status_reg); + if (ret_val) + goto release; + + status_reg &= BM_CS_STATUS_LINK_UP | + BM_CS_STATUS_RESOLVED | + BM_CS_STATUS_SPEED_MASK; + + if (status_reg == (BM_CS_STATUS_LINK_UP | + BM_CS_STATUS_RESOLVED | + BM_CS_STATUS_SPEED_1000)) + k1_enable = false; + } + + if (hw->phy.type == e1000_phy_82577) { + ret_val = hw->phy.ops.read_phy_reg_locked(hw, + HV_M_STATUS, + &status_reg); + if (ret_val) + goto release; + + status_reg &= HV_M_STATUS_LINK_UP | + HV_M_STATUS_AUTONEG_COMPLETE | + HV_M_STATUS_SPEED_MASK; + + if (status_reg == (HV_M_STATUS_LINK_UP | + HV_M_STATUS_AUTONEG_COMPLETE | + HV_M_STATUS_SPEED_1000)) + k1_enable = false; + } + + /* Link stall fix for link up */ + ret_val = hw->phy.ops.write_phy_reg_locked(hw, PHY_REG(770, 19), + 0x0100); + if (ret_val) + goto release; + + } else { + /* Link stall fix for link down */ + ret_val = hw->phy.ops.write_phy_reg_locked(hw, PHY_REG(770, 19), + 0x4100); + if (ret_val) + goto release; + } + + ret_val = e1000_configure_k1_ich8lan(hw, k1_enable); + +release: + hw->phy.ops.release_phy(hw); +out: + return ret_val; +} + +/** + * e1000_configure_k1_ich8lan - Configure K1 power state + * @hw: pointer to the HW structure + * @enable: K1 state to configure + * + * Configure the K1 power state based on the provided parameter. + * Assumes semaphore already acquired. + * + * Success returns 0, Failure returns -E1000_ERR_PHY (-2) + **/ +static s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable) +{ + s32 ret_val = 0; + u32 ctrl_reg = 0; + u32 ctrl_ext = 0; + u32 reg = 0; + u16 kmrn_reg = 0; + + ret_val = e1000e_read_kmrn_reg_locked(hw, + E1000_KMRNCTRLSTA_K1_CONFIG, + &kmrn_reg); + if (ret_val) + goto out; + + if (k1_enable) + kmrn_reg |= E1000_KMRNCTRLSTA_K1_ENABLE; + else + kmrn_reg &= ~E1000_KMRNCTRLSTA_K1_ENABLE; + + ret_val = e1000e_write_kmrn_reg_locked(hw, + E1000_KMRNCTRLSTA_K1_CONFIG, + kmrn_reg); + if (ret_val) + goto out; + + udelay(20); + ctrl_ext = er32(CTRL_EXT); + ctrl_reg = er32(CTRL); + + reg = ctrl_reg & ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100); + reg |= E1000_CTRL_FRCSPD; + ew32(CTRL, reg); + + ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_SPD_BYPS); + udelay(20); + ew32(CTRL, ctrl_reg); + ew32(CTRL_EXT, ctrl_ext); + udelay(20); + +out: + return ret_val; +} + +/** * e1000_oem_bits_config_ich8lan - SW-based LCD Configuration * @hw: pointer to the HW structure * @d0_state: boolean if entering d0 or d3 device state @@ -1030,10 +1168,20 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw) ret_val = hw->phy.ops.acquire_phy(hw); if (ret_val) return ret_val; + hw->phy.addr = 1; - e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, 0); + ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, 0); + if (ret_val) + goto out; hw->phy.ops.release_phy(hw); + /* + * Configure the K1 Si workaround during phy reset assuming there is + * link so that it disables K1 if link is in 1Gbps. + */ + ret_val = e1000_k1_gig_workaround_hv(hw, true); + +out: return ret_val; } @@ -2435,6 +2583,7 @@ static s32 e1000_get_bus_info_ich8lan(struct e1000_hw *hw) **/ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) { + struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; u16 reg; u32 ctrl, icr, kab; s32 ret_val; @@ -2470,6 +2619,18 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) ew32(PBS, E1000_PBS_16K); } + if (hw->mac.type == e1000_pchlan) { + /* Save the NVM K1 bit setting*/ + ret_val = e1000_read_nvm(hw, E1000_NVM_K1_CONFIG, 1, ®); + if (ret_val) + return ret_val; + + if (reg & E1000_NVM_K1_ENABLE) + dev_spec->nvm_k1_enabled = true; + else + dev_spec->nvm_k1_enabled = false; + } + ctrl = er32(CTRL); if (!e1000_check_reset_block(hw)) { @@ -2847,14 +3008,6 @@ static s32 e1000_get_link_up_info_ich8lan(struct e1000_hw *hw, u16 *speed, if (ret_val) return ret_val; - if ((hw->mac.type == e1000_pchlan) && (*speed == SPEED_1000)) { - ret_val = e1000e_write_kmrn_reg(hw, - E1000_KMRNCTRLSTA_K1_CONFIG, - E1000_KMRNCTRLSTA_K1_DISABLE); - if (ret_val) - return ret_val; - } - if ((hw->mac.type == e1000_ich8lan) && (hw->phy.type == e1000_phy_igp_3) && (*speed == SPEED_1000)) { diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c index f9d33ab..03175b3 100644 --- a/drivers/net/e1000e/phy.c +++ b/drivers/net/e1000e/phy.c @@ -95,13 +95,6 @@ static const u16 e1000_igp_2_cable_length_table[] = /* BM PHY Copper Specific Control 1 */ #define BM_CS_CTRL1 16 -/* BM PHY Copper Specific Status */ -#define BM_CS_STATUS 17 -#define BM_CS_STATUS_LINK_UP 0x0400 -#define BM_CS_STATUS_RESOLVED 0x0800 -#define BM_CS_STATUS_SPEED_MASK 0xC000 -#define BM_CS_STATUS_SPEED_1000 0x8000 - #define HV_MUX_DATA_CTRL PHY_REG(776, 16) #define HV_MUX_DATA_CTRL_GEN_TO_MAC 0x0400 #define HV_MUX_DATA_CTRL_FORCE_SPEED 0x0004 @@ -563,7 +556,7 @@ s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data) } /** - * e1000_read_kmrn_reg_locked - Read kumeran register + * e1000e_read_kmrn_reg_locked - Read kumeran register * @hw: pointer to the HW structure * @offset: register offset to be read * @data: pointer to the read data @@ -572,7 +565,7 @@ s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data) * information retrieved is stored in data. * Assumes semaphore already acquired. **/ -s32 e1000_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 *data) +s32 e1000e_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 *data) { return __e1000_read_kmrn_reg(hw, offset, data, true); } @@ -631,7 +624,7 @@ s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data) } /** - * e1000_write_kmrn_reg_locked - Write kumeran register + * e1000e_write_kmrn_reg_locked - Write kumeran register * @hw: pointer to the HW structure * @offset: register offset to write to * @data: data to write at register offset @@ -639,7 +632,7 @@ s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data) * Write the data to PHY register at the offset using the kumeran interface. * Assumes semaphore already acquired. **/ -s32 e1000_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 data) +s32 e1000e_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 data) { return __e1000_write_kmrn_reg(hw, offset, data, true); } -- cgit v0.10.2 From 14d18a81b5171d4433e41129619c75748b4f4d26 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 29 Oct 2009 00:10:37 +0000 Subject: net: fix kmemcheck annotations struct sk_buff kmemcheck annotations enlarged this structure by 8/16 bytes Fix this by moving 'protocol' inside flags1 bitfield, and queue_mapping inside flags2 bitfield. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index df7b23a..6aebfce 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -354,8 +354,8 @@ struct sk_buff { ipvs_property:1, peeked:1, nf_trace:1; + __be16 protocol:16; kmemcheck_bitfield_end(flags1); - __be16 protocol; void (*destructor)(struct sk_buff *skb); #if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE) @@ -367,7 +367,6 @@ struct sk_buff { #endif int iif; - __u16 queue_mapping; #ifdef CONFIG_NET_SCHED __u16 tc_index; /* traffic control index */ #ifdef CONFIG_NET_CLS_ACT @@ -376,6 +375,7 @@ struct sk_buff { #endif kmemcheck_bitfield_begin(flags2); + __u16 queue_mapping:16; #ifdef CONFIG_IPV6_NDISC_NODETYPE __u8 ndisc_nodetype:2; #endif -- cgit v0.10.2 From b0c110ca8e89f2c9cd52ec7fb1b98c5b7aa78496 Mon Sep 17 00:00:00 2001 From: jamal Date: Sun, 18 Oct 2009 02:12:33 +0000 Subject: net: Fix RPF to work with policy routing Policy routing is not looked up by mark on reverse path filtering. This fixes it. Signed-off-by: Jamal Hadi Salim Signed-off-by: David S. Miller diff --git a/include/net/ip_fib.h b/include/net/ip_fib.h index ef91fe9..4d22fab 100644 --- a/include/net/ip_fib.h +++ b/include/net/ip_fib.h @@ -210,7 +210,8 @@ extern struct fib_table *fib_get_table(struct net *net, u32 id); extern const struct nla_policy rtm_ipv4_policy[]; extern void ip_fib_init(void); extern int fib_validate_source(__be32 src, __be32 dst, u8 tos, int oif, - struct net_device *dev, __be32 *spec_dst, u32 *itag); + struct net_device *dev, __be32 *spec_dst, + u32 *itag, u32 mark); extern void fib_select_default(struct net *net, const struct flowi *flp, struct fib_result *res); diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c index e2f9505..aa00398 100644 --- a/net/ipv4/fib_frontend.c +++ b/net/ipv4/fib_frontend.c @@ -229,14 +229,17 @@ unsigned int inet_dev_addr_type(struct net *net, const struct net_device *dev, */ int fib_validate_source(__be32 src, __be32 dst, u8 tos, int oif, - struct net_device *dev, __be32 *spec_dst, u32 *itag) + struct net_device *dev, __be32 *spec_dst, + u32 *itag, u32 mark) { struct in_device *in_dev; struct flowi fl = { .nl_u = { .ip4_u = { .daddr = src, .saddr = dst, .tos = tos } }, + .mark = mark, .iif = oif }; + struct fib_result res; int no_addr, rpf; int ret; diff --git a/net/ipv4/route.c b/net/ipv4/route.c index bb41992..5b1050a 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -1854,7 +1854,7 @@ static int ip_route_input_mc(struct sk_buff *skb, __be32 daddr, __be32 saddr, goto e_inval; spec_dst = inet_select_addr(dev, 0, RT_SCOPE_LINK); } else if (fib_validate_source(saddr, 0, tos, 0, - dev, &spec_dst, &itag) < 0) + dev, &spec_dst, &itag, 0) < 0) goto e_inval; rth = dst_alloc(&ipv4_dst_ops); @@ -1967,7 +1967,7 @@ static int __mkroute_input(struct sk_buff *skb, err = fib_validate_source(saddr, daddr, tos, FIB_RES_OIF(*res), - in_dev->dev, &spec_dst, &itag); + in_dev->dev, &spec_dst, &itag, skb->mark); if (err < 0) { ip_handle_martian_source(in_dev->dev, in_dev, skb, daddr, saddr); @@ -2141,7 +2141,7 @@ static int ip_route_input_slow(struct sk_buff *skb, __be32 daddr, __be32 saddr, int result; result = fib_validate_source(saddr, daddr, tos, net->loopback_dev->ifindex, - dev, &spec_dst, &itag); + dev, &spec_dst, &itag, skb->mark); if (result < 0) goto martian_source; if (result) @@ -2170,7 +2170,7 @@ brd_input: spec_dst = inet_select_addr(dev, 0, RT_SCOPE_LINK); else { err = fib_validate_source(saddr, 0, tos, 0, dev, &spec_dst, - &itag); + &itag, skb->mark); if (err < 0) goto martian_source; if (err) -- cgit v0.10.2 From 18eb0893c12898253c18ba23b51a6ea9a07ba4c7 Mon Sep 17 00:00:00 2001 From: roel kluin Date: Sat, 3 Oct 2009 11:26:55 +0000 Subject: ibmtr: possible Read buffer overflow? Prevent read outside array bounds. Signed-off-by: Roel Kluin Signed-off-by: David S. Miller diff --git a/drivers/net/tokenring/ibmtr.c b/drivers/net/tokenring/ibmtr.c index 525bbc5..6a3c751 100644 --- a/drivers/net/tokenring/ibmtr.c +++ b/drivers/net/tokenring/ibmtr.c @@ -1143,9 +1143,16 @@ static void dir_open_adapter (struct net_device *dev) } else { char **prphase = printphase; char **prerror = printerror; + int pnr = err / 16 - 1; + int enr = err % 16 - 1; DPRINTK("TR Adapter misc open failure, error code = "); - printk("0x%x, Phase: %s, Error: %s\n", - err, prphase[err/16 -1], prerror[err%16 -1]); + if (pnr < 0 || pnr >= ARRAY_SIZE(printphase) || + enr < 0 || + enr >= ARRAY_SIZE(printerror)) + printk("0x%x, invalid Phase/Error.", err); + else + printk("0x%x, Phase: %s, Error: %s\n", err, + prphase[pnr], prerror[enr]); printk(" retrying after %ds delay...\n", TR_RETRY_INTERVAL/HZ); } -- cgit v0.10.2 From 207d6e8760c6a3323bf5ab098dbaa5c9d03bda83 Mon Sep 17 00:00:00 2001 From: Raimonds Cicans Date: Mon, 26 Oct 2009 10:52:37 +0000 Subject: r8169: Fix card drop incoming VLAN tagged MTU byte large jumbo frames r8169 card drop incoming VLAN tagged MTU byte large jumbo frames It looks to compare current and maximal packet sizes hardware use '<' operator, not '<='. Bug introduced by commit fdd7b4c3302c93f6833e338903ea77245eb510b4 ("r8169: fix crash when large packets are received") Signed-off-by: Raimonds Cicans Signed-off-by: David S. Miller diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index f98ef52..fa49356 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -3379,7 +3379,7 @@ static u16 rtl_rw_cpluscmd(void __iomem *ioaddr) static void rtl_set_rx_max_size(void __iomem *ioaddr, unsigned int rx_buf_sz) { /* Low hurts. Let's disable the filtering. */ - RTL_W16(RxMaxSize, rx_buf_sz); + RTL_W16(RxMaxSize, rx_buf_sz + 1); } static void rtl8169_set_magic_reg(void __iomem *ioaddr, unsigned mac_version) -- cgit v0.10.2 From 63ca2d74ea4f9c7a7ac082c915609a7b224908e7 Mon Sep 17 00:00:00 2001 From: Ken Kawasaki Date: Sat, 17 Oct 2009 15:39:20 +0000 Subject: pcnet_cs: add cis of PreMax PE-200 ethernet pcmcia card pcnet_cs,serial_cs: add cis of PreMax ethernet pcmcia card, and some Sierra Wireless serial card(AC555, AC7xx, AC8xx). use PROD_ID for AC7xx, because MANF_ID of AC7xx and AC8xx are the same. Signed-off-by: Ken Kawasaki Signed-off-by: David S. Miller diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index bd3447f..94c9ad2 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -1760,7 +1760,7 @@ static struct pcmcia_device_id pcnet_ids[] = { PCMCIA_DEVICE_CIS_MANF_CARD(0xc00f, 0x0002, "cis/LA-PCM.cis"), PCMCIA_DEVICE_CIS_PROD_ID12("KTI", "PE520 PLUS", 0xad180345, 0x9d58d392, "PE520.cis"), PCMCIA_DEVICE_CIS_PROD_ID12("NDC", "Ethernet", 0x01c43ae1, 0x00b2e941, "cis/NE2K.cis"), - PCMCIA_DEVICE_CIS_PROD_ID12("PMX ", "PE-200", 0x34f3f1c8, 0x10b59f8c, "PE-200.cis"), + PCMCIA_DEVICE_CIS_PROD_ID12("PMX ", "PE-200", 0x34f3f1c8, 0x10b59f8c, "cis/PE-200.cis"), PCMCIA_DEVICE_CIS_PROD_ID12("TAMARACK", "Ethernet", 0xcf434fba, 0x00b2e941, "cis/tamarack.cis"), PCMCIA_DEVICE_PROD_ID12("Ethernet", "CF Size PC Card", 0x00b2e941, 0x43ac239b), PCMCIA_DEVICE_PROD_ID123("Fast Ethernet", "CF Size PC Card", "1.0", diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c index ff4617e..7c7914f 100644 --- a/drivers/serial/serial_cs.c +++ b/drivers/serial/serial_cs.c @@ -879,10 +879,10 @@ static struct pcmcia_device_id serial_ids[] = { PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "cis/DP83903.cis"), PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "cis/3CXEM556.cis"), PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "cis/3CXEM556.cis"), - PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */ - PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0x0710, "SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */ - PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */ - PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */ + PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */ + PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC710/AC750", 0xd85f6206, 0x761b11e0, "cis/SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */ + PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */ + PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */ PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "cis/MT5634ZLX.cis"), PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-2", 0x96913a85, 0x27ab5437, "cis/COMpad2.cis"), PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "cis/COMpad4.cis"), diff --git a/firmware/Makefile b/firmware/Makefile index a6c7c3e..f4ca0c7 100644 --- a/firmware/Makefile +++ b/firmware/Makefile @@ -69,11 +69,13 @@ fw-shipped-$(CONFIG_E100) += e100/d101m_ucode.bin e100/d101s_ucode.bin \ fw-shipped-$(CONFIG_MYRI_SBUS) += myricom/lanai.bin fw-shipped-$(CONFIG_PCMCIA_PCNET) += cis/LA-PCM.cis cis/PCMLM28.cis \ cis/DP83903.cis cis/NE2K.cis \ - cis/tamarack.cis + cis/tamarack.cis cis/PE-200.cis fw-shipped-$(CONFIG_PCMCIA_3C589) += cis/3CXEM556.cis fw-shipped-$(CONFIG_PCMCIA_3C574) += cis/3CCFEM556.cis fw-shipped-$(CONFIG_SERIAL_8250_CS) += cis/MT5634ZLX.cis cis/RS-COM-2P.cis \ - cis/COMpad2.cis cis/COMpad4.cis + cis/COMpad2.cis cis/COMpad4.cis \ + cis/SW_555_SER.cis cis/SW_7xx_SER.cis \ + cis/SW_8xx_SER.cis fw-shipped-$(CONFIG_PCMCIA_SMC91C92) += ositech/Xilinx7OD.bin fw-shipped-$(CONFIG_SCSI_ADVANSYS) += advansys/mcode.bin advansys/38C1600.bin \ advansys/3550.bin advansys/38C0800.bin diff --git a/firmware/WHENCE b/firmware/WHENCE index c437e14..7a8adc0 100644 --- a/firmware/WHENCE +++ b/firmware/WHENCE @@ -600,6 +600,7 @@ File: cis/LA-PCM.cis cis/DP83903.cis cis/NE2K.cis cis/tamarack.cis + cis/PE-200.cis Licence: GPL @@ -633,6 +634,9 @@ File: cis/MT5634ZLX.cis cis/RS-COM-2P.cis cis/COMpad2.cis cis/COMpad4.cis + cis/SW_555_SER.cis + cis/SW_7xx_SER.cis + cis/SW_8xx_SER.cis Licence: GPL diff --git a/firmware/cis/PE-200.cis.ihex b/firmware/cis/PE-200.cis.ihex new file mode 100644 index 0000000..e6dbdab --- /dev/null +++ b/firmware/cis/PE-200.cis.ihex @@ -0,0 +1,9 @@ +:1000000001030000FF151E0401504D582020200060 +:1000100050452D3230300045544845524E4554002D +:1000200052303100FF210206031A050101000101CF +:100030001B0EC181190155E051000F100F30FFFF59 +:040040001400FF00A9 +:00000001FF +# +# Replacement CIS for PE-200 ethernet card +# diff --git a/firmware/cis/SW_555_SER.cis.ihex b/firmware/cis/SW_555_SER.cis.ihex new file mode 100644 index 0000000..9b9348a --- /dev/null +++ b/firmware/cis/SW_555_SER.cis.ihex @@ -0,0 +1,12 @@ +:100000000101FF17034100FF20043F0110072102F7 +:100010000200152A070053696572726120576972E0 +:10002000656C657373004169724361726420353594 +:1000300035004135353500526576203100FF1A050F +:1000400001030007731B0BE00118A360F8030730DE +:10005000BC3F1B08A10108A360F802071B08A2010E +:1000600008A360E803071B08A30108A360E80207D0 +:0A0070001B04A40108231400FF0084 +:00000001FF +# +# Replacement CIS for AC555 provided by Sierra Wireless +# diff --git a/firmware/cis/SW_7xx_SER.cis.ihex b/firmware/cis/SW_7xx_SER.cis.ihex new file mode 100644 index 0000000..11e44ad --- /dev/null +++ b/firmware/cis/SW_7xx_SER.cis.ihex @@ -0,0 +1,13 @@ +:100000000101FF17034100FF2004920110072102A4 +:1000100002001537070053696572726120576972D3 +:10002000656C6573730041433731302F4143373579 +:10003000300047505253204E6574776F726B2041E9 +:1000400064617074657200523100FF1A050103008B +:1000500007731B10E00119784D555D25A360F80367 +:100060000730BC861B08A10108A360F802071B0823 +:10007000A20108A360E803071B08A30108A360E826 +:0C00800002071B04A40108231400FF0069 +:00000001FF +# +# Replacement CIS for AC7xx provided by Sierra Wireless +# diff --git a/firmware/cis/SW_8xx_SER.cis.ihex b/firmware/cis/SW_8xx_SER.cis.ihex new file mode 100644 index 0000000..bbcfe63 --- /dev/null +++ b/firmware/cis/SW_8xx_SER.cis.ihex @@ -0,0 +1,13 @@ +:100000000101FF17034100FF2004920110072102A4 +:100010000200152F070053696572726120576972DB +:10002000656C657373004143383530003347204EAB +:100030006574776F726B20416461707465720052F1 +:100040003100FF1A0501030007731B10E001197846 +:100050004D555D25A360F8480730BC861B08A101FB +:1000600008A360F847071B08A20108A360E8480737 +:100070001B08A30108A360E847071B04A401082389 +:040080001400FF0069 +:00000001FF +# +# Replacement CIS for AC8xx provided by Sierra Wireless +# -- cgit v0.10.2 From 3b826386d376e5545d2e92b2da5ebd965cafae97 Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Fri, 30 Oct 2009 09:27:07 +0100 Subject: xfs: free temporary cursor in xfs_dialloc Commit bd169565993b39b9b4b102cdac8b13e0a259ce2f seems to have a slight regression where this code path: if (!--searchdistance) { /* * Not in range - save last search * location and allocate a new inode */ ... goto newino; } doesn't free the temporary cursor (tcur) that got dup'd in this function. This leaks an item in the xfs_btree_cur zone, and it's caught on module unload: =========================================================== BUG xfs_btree_cur: Objects remaining on kmem_cache_close() ----------------------------------------------------------- It seems like maybe a single free at the end of the function might be cleaner, but for now put a del_cursor right in this code block similar to the handling in the rest of the function. Signed-off-by: Eric Sandeen Signed-off-by: Christoph Hellwig diff --git a/fs/xfs/xfs_ialloc.c b/fs/xfs/xfs_ialloc.c index ab64f3e..0785797 100644 --- a/fs/xfs/xfs_ialloc.c +++ b/fs/xfs/xfs_ialloc.c @@ -880,6 +880,7 @@ nextag: * Not in range - save last search * location and allocate a new inode */ + xfs_btree_del_cursor(tcur, XFS_BTREE_NOERROR); pag->pagl_leftrec = trec.ir_startino; pag->pagl_rightrec = rec.ir_startino; pag->pagl_pagino = pagino; -- cgit v0.10.2 From c7ff91d722e44c98504e6e2c357b47e1988dfbbd Mon Sep 17 00:00:00 2001 From: Ryota Yamauchi Date: Fri, 30 Oct 2009 09:27:44 +0100 Subject: xfs: fix xfs_quota remove error The xfs_quota returns ENOSYS when remove command is executed. Reproducable with following steps. # mount -t xfs -o uquota /dev/sda7 /mnt/mp1 # xfs_quota -x -c off -c remove XFS_QUOTARM: Function not implemented. The remove command is allowed during quotaoff, but xfs_fs_set_xstate() checks whether quota is running, and it leads to ENOSYS. To solve this problem, add a check for X_QUOTARM. Signed-off-by: Ryota Yamauchi Signed-off-by: Utako Kusaka Signed-off-by: Christoph Hellwig diff --git a/fs/xfs/linux-2.6/xfs_quotaops.c b/fs/xfs/linux-2.6/xfs_quotaops.c index cb6e2cc..13cc7b5 100644 --- a/fs/xfs/linux-2.6/xfs_quotaops.c +++ b/fs/xfs/linux-2.6/xfs_quotaops.c @@ -80,7 +80,7 @@ xfs_fs_set_xstate( if (sb->s_flags & MS_RDONLY) return -EROFS; - if (!XFS_IS_QUOTA_RUNNING(mp)) + if (op != Q_XQUOTARM && !XFS_IS_QUOTA_RUNNING(mp)) return -ENOSYS; if (!capable(CAP_SYS_ADMIN)) return -EPERM; -- cgit v0.10.2 From 97609458ce972180172ae2cec0483451820e6a41 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Thu, 15 Oct 2009 10:22:54 +0800 Subject: ALSA: SND_CS5535AUDIO: Remove the X86 platform dependency SND_CS5535AUDIO is available on Loongson(MIPS compatible) family machines, and checked it with ARCH=x86_64, no relative compiling warnings & errors, so, remove the platform dependency directly. Reported-by: rixed@happyleptic.org Acked-by: Andres Salomon Signed-off-by: Wu Zhangjin Signed-off-by: Takashi Iwai diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig index fb5ee3c..75c602b 100644 --- a/sound/pci/Kconfig +++ b/sound/pci/Kconfig @@ -259,7 +259,6 @@ config SND_CS5530 config SND_CS5535AUDIO tristate "CS5535/CS5536 Audio" - depends on X86 && !X86_64 select SND_PCM select SND_AC97_CODEC help -- cgit v0.10.2 From b71207e9dc044b30d8b5d7f1c2290ba14563f05c Mon Sep 17 00:00:00 2001 From: Stas Sergeev Date: Fri, 30 Oct 2009 11:51:24 +0100 Subject: ALSA: pcsp - Fix nforce workaround The attached patch fixes the problems introduced in this commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=eea0579fc85e64e9f05361d5aacf496fe7a151aa - Fix nForce workaround by honouring the pointer_update var - Revert "ns" to u64, as per the hrtimer API - Revert to the zero-delay timer startup, since I can't reproduce any problem with it (please, give me the hint!) Signed-off-by: Stas Sergeev Signed-off-by: Takashi Iwai diff --git a/sound/drivers/pcsp/pcsp_lib.c b/sound/drivers/pcsp/pcsp_lib.c index 84cc265..e1145ac 100644 --- a/sound/drivers/pcsp/pcsp_lib.c +++ b/sound/drivers/pcsp/pcsp_lib.c @@ -39,25 +39,20 @@ static DECLARE_TASKLET(pcsp_pcm_tasklet, pcsp_call_pcm_elapsed, 0); /* write the port and returns the next expire time in ns; * called at the trigger-start and in hrtimer callback */ -static unsigned long pcsp_timer_update(struct hrtimer *handle) +static u64 pcsp_timer_update(struct snd_pcsp *chip) { unsigned char timer_cnt, val; u64 ns; struct snd_pcm_substream *substream; struct snd_pcm_runtime *runtime; - struct snd_pcsp *chip = container_of(handle, struct snd_pcsp, timer); unsigned long flags; if (chip->thalf) { outb(chip->val61, 0x61); chip->thalf = 0; - if (!atomic_read(&chip->timer_active)) - return 0; return chip->ns_rem; } - if (!atomic_read(&chip->timer_active)) - return 0; substream = chip->playback_substream; if (!substream) return 0; @@ -88,24 +83,17 @@ static unsigned long pcsp_timer_update(struct hrtimer *handle) return ns; } -enum hrtimer_restart pcsp_do_timer(struct hrtimer *handle) +static void pcsp_pointer_update(struct snd_pcsp *chip) { - struct snd_pcsp *chip = container_of(handle, struct snd_pcsp, timer); struct snd_pcm_substream *substream; - int periods_elapsed, pointer_update; size_t period_bytes, buffer_bytes; - unsigned long ns; + int periods_elapsed; unsigned long flags; - pointer_update = !chip->thalf; - ns = pcsp_timer_update(handle); - if (!ns) - return HRTIMER_NORESTART; - /* update the playback position */ substream = chip->playback_substream; if (!substream) - return HRTIMER_NORESTART; + return; period_bytes = snd_pcm_lib_period_bytes(substream); buffer_bytes = snd_pcm_lib_buffer_bytes(substream); @@ -134,6 +122,26 @@ enum hrtimer_restart pcsp_do_timer(struct hrtimer *handle) if (periods_elapsed) tasklet_schedule(&pcsp_pcm_tasklet); +} + +enum hrtimer_restart pcsp_do_timer(struct hrtimer *handle) +{ + struct snd_pcsp *chip = container_of(handle, struct snd_pcsp, timer); + int pointer_update; + u64 ns; + + if (!atomic_read(&chip->timer_active) || !chip->playback_substream) + return HRTIMER_NORESTART; + + pointer_update = !chip->thalf; + ns = pcsp_timer_update(chip); + if (!ns) { + printk(KERN_WARNING "PCSP: unexpected stop\n"); + return HRTIMER_NORESTART; + } + + if (pointer_update) + pcsp_pointer_update(chip); hrtimer_forward(handle, hrtimer_get_expires(handle), ns_to_ktime(ns)); @@ -142,8 +150,6 @@ enum hrtimer_restart pcsp_do_timer(struct hrtimer *handle) static int pcsp_start_playing(struct snd_pcsp *chip) { - unsigned long ns; - #if PCSP_DEBUG printk(KERN_INFO "PCSP: start_playing called\n"); #endif @@ -159,11 +165,7 @@ static int pcsp_start_playing(struct snd_pcsp *chip) atomic_set(&chip->timer_active, 1); chip->thalf = 0; - ns = pcsp_timer_update(&pcsp_chip.timer); - if (!ns) - return -EIO; - - hrtimer_start(&pcsp_chip.timer, ktime_set(0, ns), HRTIMER_MODE_REL); + hrtimer_start(&pcsp_chip.timer, ktime_set(0, 0), HRTIMER_MODE_REL); return 0; } @@ -232,21 +234,22 @@ static int snd_pcsp_playback_hw_free(struct snd_pcm_substream *substream) static int snd_pcsp_playback_prepare(struct snd_pcm_substream *substream) { struct snd_pcsp *chip = snd_pcm_substream_chip(substream); + pcsp_sync_stop(chip); + chip->playback_ptr = 0; + chip->period_ptr = 0; + chip->fmt_size = + snd_pcm_format_physical_width(substream->runtime->format) >> 3; + chip->is_signed = snd_pcm_format_signed(substream->runtime->format); #if PCSP_DEBUG printk(KERN_INFO "PCSP: prepare called, " - "size=%zi psize=%zi f=%zi f1=%i\n", + "size=%zi psize=%zi f=%zi f1=%i fsize=%i\n", snd_pcm_lib_buffer_bytes(substream), snd_pcm_lib_period_bytes(substream), snd_pcm_lib_buffer_bytes(substream) / snd_pcm_lib_period_bytes(substream), - substream->runtime->periods); + substream->runtime->periods, + chip->fmt_size); #endif - pcsp_sync_stop(chip); - chip->playback_ptr = 0; - chip->period_ptr = 0; - chip->fmt_size = - snd_pcm_format_physical_width(substream->runtime->format) >> 3; - chip->is_signed = snd_pcm_format_signed(substream->runtime->format); return 0; } diff --git a/sound/drivers/pcsp/pcsp_mixer.c b/sound/drivers/pcsp/pcsp_mixer.c index 199b033..903bc84 100644 --- a/sound/drivers/pcsp/pcsp_mixer.c +++ b/sound/drivers/pcsp/pcsp_mixer.c @@ -72,7 +72,7 @@ static int pcsp_treble_put(struct snd_kcontrol *kcontrol, if (treble != chip->treble) { chip->treble = treble; #if PCSP_DEBUG - printk(KERN_INFO "PCSP: rate set to %i\n", PCSP_RATE()); + printk(KERN_INFO "PCSP: rate set to %li\n", PCSP_RATE()); #endif changed = 1; } -- cgit v0.10.2 From db32f99816f7cbe61c1f75c1560655a3bf52488a Mon Sep 17 00:00:00 2001 From: peer chen Date: Thu, 15 Oct 2009 16:37:47 +0800 Subject: ALSA: hda_intel: Add the Linux device ID for NVIDIA HDA controller Add the generic device ID for NVIDIA HDA controller. Signed-off-by: Peer Chen Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index c9ad182..e340792 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2674,6 +2674,7 @@ static struct pci_device_id azx_ids[] = { { PCI_DEVICE(0x10de, 0x044b), .driver_data = AZX_DRIVER_NVIDIA }, { PCI_DEVICE(0x10de, 0x055c), .driver_data = AZX_DRIVER_NVIDIA }, { PCI_DEVICE(0x10de, 0x055d), .driver_data = AZX_DRIVER_NVIDIA }, + { PCI_DEVICE(0x10de, 0x0590), .driver_data = AZX_DRIVER_NVIDIA }, { PCI_DEVICE(0x10de, 0x0774), .driver_data = AZX_DRIVER_NVIDIA }, { PCI_DEVICE(0x10de, 0x0775), .driver_data = AZX_DRIVER_NVIDIA }, { PCI_DEVICE(0x10de, 0x0776), .driver_data = AZX_DRIVER_NVIDIA }, -- cgit v0.10.2 From 4b3be6afa4ab8b3fdce39df68bad71f8b85164de Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 17 Oct 2009 08:33:22 +0200 Subject: ALSA: sound: Move dereference after NULL test and drop unnecessary NULL tests In pcm.c, if the NULL test on pcm is needed, then the dereference should be after the NULL test. In dummy.c and ali5451.c, the context of the calls to snd_card_dummy_new_mixer and snd_ali_free_voice show that dummy and pvoice, respectively cannot be NULL. A simplified version of the semantic match that detects this problem is as follows (http://coccinelle.lip6.fr/): // @match exists@ expression x, E; identifier fld; @@ * x->fld ... when != \(x = E\|&x\) * x == NULL // Signed-off-by: Julia Lawall Signed-off-by: Takashi Iwai diff --git a/sound/core/pcm.c b/sound/core/pcm.c index 0c14401..c69c60b 100644 --- a/sound/core/pcm.c +++ b/sound/core/pcm.c @@ -953,11 +953,12 @@ static int snd_pcm_dev_register(struct snd_device *device) struct snd_pcm_substream *substream; struct snd_pcm_notify *notify; char str[16]; - struct snd_pcm *pcm = device->device_data; + struct snd_pcm *pcm; struct device *dev; - if (snd_BUG_ON(!pcm || !device)) + if (snd_BUG_ON(!device || !device->device_data)) return -ENXIO; + pcm = device->device_data; mutex_lock(®ister_mutex); err = snd_pcm_add(pcm); if (err) { diff --git a/sound/drivers/dummy.c b/sound/drivers/dummy.c index 6ba066c..146ef00 100644 --- a/sound/drivers/dummy.c +++ b/sound/drivers/dummy.c @@ -808,8 +808,6 @@ static int __devinit snd_card_dummy_new_mixer(struct snd_dummy *dummy) unsigned int idx; int err; - if (snd_BUG_ON(!dummy)) - return -EINVAL; spin_lock_init(&dummy->mixer_lock); strcpy(card->mixername, "Dummy Mixer"); diff --git a/sound/pci/ali5451/ali5451.c b/sound/pci/ali5451/ali5451.c index b458d20..aaf4da6 100644 --- a/sound/pci/ali5451/ali5451.c +++ b/sound/pci/ali5451/ali5451.c @@ -973,7 +973,7 @@ static void snd_ali_free_voice(struct snd_ali * codec, void *private_data; snd_ali_printk("free_voice: channel=%d\n",pvoice->number); - if (pvoice == NULL || !pvoice->use) + if (!pvoice->use) return; snd_ali_clear_voices(codec, pvoice->number, pvoice->number); spin_lock_irq(&codec->voice_alloc); -- cgit v0.10.2 From e8e0929d7290cab7c5b1a3e5f5f54f73daf38038 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 17 Oct 2009 08:33:47 +0200 Subject: ALSA: sound/parisc: Move dereference after NULL test If the NULL test on h is needed in snd_harmony_mixer_init, then the dereference should be after the NULL test. Actually, there is a sequence of calls: snd_harmony_create, then snd_harmony_pcm_init, and then snd_harmony_mixer_init. snd_harmony_create initializes h, but may indeed leave it as NULL. There was no NULL test at the beginning of snd_harmony_pcm_init, so I have added one. The NULL test in snd_harmony_mixer_init is then not necessary, but in case the ordering of the calls changes, I have left it, and moved the dereference after it. A simplified version of the semantic match that detects this problem is as follows (http://coccinelle.lip6.fr/): // @match exists@ expression x, E; identifier fld; @@ * x->fld ... when != \(x = E\|&x\) * x == NULL // Signed-off-by: Julia Lawall Signed-off-by: Takashi Iwai diff --git a/sound/parisc/harmony.c b/sound/parisc/harmony.c index e924492..f47f9e2 100644 --- a/sound/parisc/harmony.c +++ b/sound/parisc/harmony.c @@ -624,6 +624,9 @@ snd_harmony_pcm_init(struct snd_harmony *h) struct snd_pcm *pcm; int err; + if (snd_BUG_ON(!h)) + return -EINVAL; + harmony_disable_interrupts(h); err = snd_pcm_new(h->card, "harmony", 0, 1, 1, &pcm); @@ -865,11 +868,12 @@ snd_harmony_mixer_reset(struct snd_harmony *h) static int __devinit snd_harmony_mixer_init(struct snd_harmony *h) { - struct snd_card *card = h->card; + struct snd_card *card; int idx, err; if (snd_BUG_ON(!h)) return -EINVAL; + card = h->card; strcpy(card->mixername, "Harmony Gain control interface"); for (idx = 0; idx < HARMONY_CONTROLS; idx++) { -- cgit v0.10.2 From 3702b082281929cf1bdf14f67eb0619aab58b496 Mon Sep 17 00:00:00 2001 From: Mark Hills Date: Sat, 24 Oct 2009 12:59:35 +0100 Subject: ALSA: snd-usb-caiaq: Missing lock around use of buffer positions Fix a race which causes snd_pcm_update_hw_ptr_pos() to report a bug. Signed-off-by: Mark Hills Acked-by: Daniel Mack Signed-off-by: Takashi Iwai diff --git a/sound/usb/caiaq/audio.c b/sound/usb/caiaq/audio.c index 121af06..e76017c 100644 --- a/sound/usb/caiaq/audio.c +++ b/sound/usb/caiaq/audio.c @@ -269,16 +269,22 @@ snd_usb_caiaq_pcm_pointer(struct snd_pcm_substream *sub) { int index = sub->number; struct snd_usb_caiaqdev *dev = snd_pcm_substream_chip(sub); + snd_pcm_uframes_t ptr; + + spin_lock(&dev->spinlock); if (dev->input_panic || dev->output_panic) - return SNDRV_PCM_POS_XRUN; + ptr = SNDRV_PCM_POS_XRUN; if (sub->stream == SNDRV_PCM_STREAM_PLAYBACK) - return bytes_to_frames(sub->runtime, + ptr = bytes_to_frames(sub->runtime, dev->audio_out_buf_pos[index]); else - return bytes_to_frames(sub->runtime, + ptr = bytes_to_frames(sub->runtime, dev->audio_in_buf_pos[index]); + + spin_unlock(&dev->spinlock); + return ptr; } /* operators for both playback and capture */ -- cgit v0.10.2 From ac9dd9d384b018f1e1c5a9a2686ab5605ce55818 Mon Sep 17 00:00:00 2001 From: Mark Hills Date: Sat, 24 Oct 2009 12:59:36 +0100 Subject: ALSA: snd-usb-caiaq: Lock on stream start/unpause Fix a bug which can result in white noise from the driver after stream start or unpause. Signed-off-by: Mark Hills Acked-by: Daniel Mack Signed-off-by: Takashi Iwai diff --git a/sound/usb/caiaq/audio.c b/sound/usb/caiaq/audio.c index e76017c..86b2c3b 100644 --- a/sound/usb/caiaq/audio.c +++ b/sound/usb/caiaq/audio.c @@ -62,10 +62,14 @@ static void activate_substream(struct snd_usb_caiaqdev *dev, struct snd_pcm_substream *sub) { + spin_lock(&dev->spinlock); + if (sub->stream == SNDRV_PCM_STREAM_PLAYBACK) dev->sub_playback[sub->number] = sub; else dev->sub_capture[sub->number] = sub; + + spin_unlock(&dev->spinlock); } static void -- cgit v0.10.2 From 467cc1692036909ee0a723ce633fc4a53d72fd9a Mon Sep 17 00:00:00 2001 From: Mark Hills Date: Sat, 24 Oct 2009 12:59:37 +0100 Subject: ALSA: snd-usb-caiaq: Bump version number to 1.3.20 Signed-off-by: Mark Hills Acked-by: Daniel Mack Signed-off-by: Takashi Iwai diff --git a/sound/usb/caiaq/device.c b/sound/usb/caiaq/device.c index 83e6c13..a3f02dd 100644 --- a/sound/usb/caiaq/device.c +++ b/sound/usb/caiaq/device.c @@ -35,7 +35,7 @@ #include "input.h" MODULE_AUTHOR("Daniel Mack "); -MODULE_DESCRIPTION("caiaq USB audio, version 1.3.19"); +MODULE_DESCRIPTION("caiaq USB audio, version 1.3.20"); MODULE_LICENSE("GPL"); MODULE_SUPPORTED_DEVICE("{{Native Instruments, RigKontrol2}," "{Native Instruments, RigKontrol3}," -- cgit v0.10.2 From 3d00941371a765779c4e3509214c7e5793cce1fe Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Thu, 22 Oct 2009 09:04:09 +0200 Subject: sound: via82xx: deactivate DXS controls of inactive streams Activate the DXS volume controls only when the corresponding stream is being used. This makes the behaviour consistent with the other drivers that have per-stream volume controls. Signed-off-by: Clemens Ladisch Signed-off-by: Takashi Iwai diff --git a/sound/pci/via82xx.c b/sound/pci/via82xx.c index 91683a3..8a332d2 100644 --- a/sound/pci/via82xx.c +++ b/sound/pci/via82xx.c @@ -386,6 +386,7 @@ struct via82xx { struct snd_pcm *pcms[2]; struct snd_rawmidi *rmidi; + struct snd_kcontrol *dxs_controls[4]; struct snd_ac97_bus *ac97_bus; struct snd_ac97 *ac97; @@ -1216,9 +1217,9 @@ static int snd_via82xx_pcm_open(struct via82xx *chip, struct viadev *viadev, /* - * open callback for playback on via686 and via823x DSX + * open callback for playback on via686 */ -static int snd_via82xx_playback_open(struct snd_pcm_substream *substream) +static int snd_via686_playback_open(struct snd_pcm_substream *substream) { struct via82xx *chip = snd_pcm_substream_chip(substream); struct viadev *viadev = &chip->devs[chip->playback_devno + substream->number]; @@ -1230,6 +1231,32 @@ static int snd_via82xx_playback_open(struct snd_pcm_substream *substream) } /* + * open callback for playback on via823x DXS + */ +static int snd_via8233_playback_open(struct snd_pcm_substream *substream) +{ + struct via82xx *chip = snd_pcm_substream_chip(substream); + struct viadev *viadev; + unsigned int stream; + int err; + + viadev = &chip->devs[chip->playback_devno + substream->number]; + if ((err = snd_via82xx_pcm_open(chip, viadev, substream)) < 0) + return err; + stream = viadev->reg_offset / 0x10; + if (chip->dxs_controls[stream]) { + chip->playback_volume[stream][0] = 0; + chip->playback_volume[stream][1] = 0; + chip->dxs_controls[stream]->vd[0].access &= + ~SNDRV_CTL_ELEM_ACCESS_INACTIVE; + snd_ctl_notify(chip->card, SNDRV_CTL_EVENT_MASK_VALUE | + SNDRV_CTL_EVENT_MASK_INFO, + &chip->dxs_controls[stream]->id); + } + return 0; +} + +/* * open callback for playback on via823x multi-channel */ static int snd_via8233_multi_open(struct snd_pcm_substream *substream) @@ -1302,10 +1329,26 @@ static int snd_via82xx_pcm_close(struct snd_pcm_substream *substream) return 0; } +static int snd_via8233_playback_close(struct snd_pcm_substream *substream) +{ + struct via82xx *chip = snd_pcm_substream_chip(substream); + struct viadev *viadev = substream->runtime->private_data; + unsigned int stream; + + stream = viadev->reg_offset / 0x10; + if (chip->dxs_controls[stream]) { + chip->dxs_controls[stream]->vd[0].access |= + SNDRV_CTL_ELEM_ACCESS_INACTIVE; + snd_ctl_notify(chip->card, SNDRV_CTL_EVENT_MASK_INFO, + &chip->dxs_controls[stream]->id); + } + return snd_via82xx_pcm_close(substream); +} + /* via686 playback callbacks */ static struct snd_pcm_ops snd_via686_playback_ops = { - .open = snd_via82xx_playback_open, + .open = snd_via686_playback_open, .close = snd_via82xx_pcm_close, .ioctl = snd_pcm_lib_ioctl, .hw_params = snd_via82xx_hw_params, @@ -1331,8 +1374,8 @@ static struct snd_pcm_ops snd_via686_capture_ops = { /* via823x DSX playback callbacks */ static struct snd_pcm_ops snd_via8233_playback_ops = { - .open = snd_via82xx_playback_open, - .close = snd_via82xx_pcm_close, + .open = snd_via8233_playback_open, + .close = snd_via8233_playback_close, .ioctl = snd_pcm_lib_ioctl, .hw_params = snd_via82xx_hw_params, .hw_free = snd_via82xx_hw_free, @@ -1709,8 +1752,9 @@ static struct snd_kcontrol_new snd_via8233_dxs_volume_control __devinitdata = { .device = 0, /* .subdevice set later */ .name = "PCM Playback Volume", - .access = (SNDRV_CTL_ELEM_ACCESS_READWRITE | - SNDRV_CTL_ELEM_ACCESS_TLV_READ), + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | + SNDRV_CTL_ELEM_ACCESS_TLV_READ | + SNDRV_CTL_ELEM_ACCESS_INACTIVE, .info = snd_via8233_dxs_volume_info, .get = snd_via8233_dxs_volume_get, .put = snd_via8233_dxs_volume_put, @@ -1948,6 +1992,7 @@ static int __devinit snd_via8233_init_misc(struct via82xx *chip) err = snd_ctl_add(chip->card, kctl); if (err < 0) return err; + chip->dxs_controls[i] = kctl; } } } -- cgit v0.10.2 From 9d410c796067686b1e032d54ce475b7055537138 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 30 Oct 2009 05:03:53 +0000 Subject: net: fix sk_forward_alloc corruption On UDP sockets, we must call skb_free_datagram() with socket locked, or risk sk_forward_alloc corruption. This requirement is not respected in SUNRPC. Add a convenient helper, skb_free_datagram_locked() and use it in SUNRPC Reported-by: Francis Moreau Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 6aebfce..bcdd660 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -1757,6 +1757,8 @@ extern int skb_copy_datagram_const_iovec(const struct sk_buff *from, int to_offset, int size); extern void skb_free_datagram(struct sock *sk, struct sk_buff *skb); +extern void skb_free_datagram_locked(struct sock *sk, + struct sk_buff *skb); extern int skb_kill_datagram(struct sock *sk, struct sk_buff *skb, unsigned int flags); extern __wsum skb_checksum(const struct sk_buff *skb, int offset, diff --git a/net/core/datagram.c b/net/core/datagram.c index 1c6cf3a..4ade301 100644 --- a/net/core/datagram.c +++ b/net/core/datagram.c @@ -224,6 +224,15 @@ void skb_free_datagram(struct sock *sk, struct sk_buff *skb) consume_skb(skb); sk_mem_reclaim_partial(sk); } +EXPORT_SYMBOL(skb_free_datagram); + +void skb_free_datagram_locked(struct sock *sk, struct sk_buff *skb) +{ + lock_sock(sk); + skb_free_datagram(sk, skb); + release_sock(sk); +} +EXPORT_SYMBOL(skb_free_datagram_locked); /** * skb_kill_datagram - Free a datagram skbuff forcibly @@ -752,5 +761,4 @@ unsigned int datagram_poll(struct file *file, struct socket *sock, EXPORT_SYMBOL(datagram_poll); EXPORT_SYMBOL(skb_copy_and_csum_datagram_iovec); EXPORT_SYMBOL(skb_copy_datagram_iovec); -EXPORT_SYMBOL(skb_free_datagram); EXPORT_SYMBOL(skb_recv_datagram); diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index d0d436d..0fa9f70 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -999,9 +999,7 @@ try_again: err = ulen; out_free: - lock_sock(sk); - skb_free_datagram(sk, skb); - release_sock(sk); + skb_free_datagram_locked(sk, skb); out: return err; diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index 3a60f12..cf538ed 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -288,9 +288,7 @@ try_again: err = ulen; out_free: - lock_sock(sk); - skb_free_datagram(sk, skb); - release_sock(sk); + skb_free_datagram_locked(sk, skb); out: return err; diff --git a/net/sunrpc/svcsock.c b/net/sunrpc/svcsock.c index ccc5e83..1c246a4 100644 --- a/net/sunrpc/svcsock.c +++ b/net/sunrpc/svcsock.c @@ -111,7 +111,7 @@ static void svc_release_skb(struct svc_rqst *rqstp) rqstp->rq_xprt_ctxt = NULL; dprintk("svc: service %p, releasing skb %p\n", rqstp, skb); - skb_free_datagram(svsk->sk_sk, skb); + skb_free_datagram_locked(svsk->sk_sk, skb); } } @@ -578,7 +578,7 @@ static int svc_udp_recvfrom(struct svc_rqst *rqstp) "svc: received unknown control message %d/%d; " "dropping RPC reply datagram\n", cmh->cmsg_level, cmh->cmsg_type); - skb_free_datagram(svsk->sk_sk, skb); + skb_free_datagram_locked(svsk->sk_sk, skb); return 0; } @@ -588,18 +588,18 @@ static int svc_udp_recvfrom(struct svc_rqst *rqstp) if (csum_partial_copy_to_xdr(&rqstp->rq_arg, skb)) { local_bh_enable(); /* checksum error */ - skb_free_datagram(svsk->sk_sk, skb); + skb_free_datagram_locked(svsk->sk_sk, skb); return 0; } local_bh_enable(); - skb_free_datagram(svsk->sk_sk, skb); + skb_free_datagram_locked(svsk->sk_sk, skb); } else { /* we can use it in-place */ rqstp->rq_arg.head[0].iov_base = skb->data + sizeof(struct udphdr); rqstp->rq_arg.head[0].iov_len = len; if (skb_checksum_complete(skb)) { - skb_free_datagram(svsk->sk_sk, skb); + skb_free_datagram_locked(svsk->sk_sk, skb); return 0; } rqstp->rq_xprt_ctxt = skb; -- cgit v0.10.2 From 33cb7d33a1c36e07839d08a4d1a33bf6a0f70bba Mon Sep 17 00:00:00 2001 From: Brandon Philips Date: Thu, 29 Oct 2009 13:58:07 +0000 Subject: sky2: set carrier off in probe Before bringing up a sky2 interface up ethtool reports "Link detected: yes". Do as ixgbe does and netif_carrier_off() on probe(). Signed-off-by: Brandon Philips Signed-off-by: David S. Miller diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 2ab5c39..6a10d7b 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -4538,6 +4538,8 @@ static int __devinit sky2_probe(struct pci_dev *pdev, goto err_out_free_netdev; } + netif_carrier_off(dev); + netif_napi_add(dev, &hw->napi, sky2_poll, NAPI_WEIGHT); err = request_irq(pdev->irq, sky2_intr, -- cgit v0.10.2 From 2e9526b352061ee0fd2a1580a2e3a5af960dabc4 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Fri, 30 Oct 2009 05:51:48 +0000 Subject: gre: Fix dev_addr clobbering for gretap Nathan Neulinger noticed that gretap devices get their MAC address from the local IP address, which results in invalid MAC addresses half of the time. This is because gretap is still using the tunnel netdev ops rather than the correct tap netdev ops struct. This patch also fixes changelink to not clobber the MAC address for the gretap case. Signed-off-by: Herbert Xu Acked-by: Stephen Hemminger Tested-by: Nathan Neulinger Signed-off-by: David S. Miller diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c index 41ada99..1433338 100644 --- a/net/ipv4/ip_gre.c +++ b/net/ipv4/ip_gre.c @@ -1464,7 +1464,7 @@ static void ipgre_tap_setup(struct net_device *dev) ether_setup(dev); - dev->netdev_ops = &ipgre_netdev_ops; + dev->netdev_ops = &ipgre_tap_netdev_ops; dev->destructor = free_netdev; dev->iflink = 0; @@ -1525,25 +1525,29 @@ static int ipgre_changelink(struct net_device *dev, struct nlattr *tb[], if (t->dev != dev) return -EEXIST; } else { - unsigned nflags = 0; - t = nt; - if (ipv4_is_multicast(p.iph.daddr)) - nflags = IFF_BROADCAST; - else if (p.iph.daddr) - nflags = IFF_POINTOPOINT; + if (dev->type != ARPHRD_ETHER) { + unsigned nflags = 0; - if ((dev->flags ^ nflags) & - (IFF_POINTOPOINT | IFF_BROADCAST)) - return -EINVAL; + if (ipv4_is_multicast(p.iph.daddr)) + nflags = IFF_BROADCAST; + else if (p.iph.daddr) + nflags = IFF_POINTOPOINT; + + if ((dev->flags ^ nflags) & + (IFF_POINTOPOINT | IFF_BROADCAST)) + return -EINVAL; + } ipgre_tunnel_unlink(ign, t); t->parms.iph.saddr = p.iph.saddr; t->parms.iph.daddr = p.iph.daddr; t->parms.i_key = p.i_key; - memcpy(dev->dev_addr, &p.iph.saddr, 4); - memcpy(dev->broadcast, &p.iph.daddr, 4); + if (dev->type != ARPHRD_ETHER) { + memcpy(dev->dev_addr, &p.iph.saddr, 4); + memcpy(dev->broadcast, &p.iph.daddr, 4); + } ipgre_tunnel_link(ign, t); netdev_state_change(dev); } -- cgit v0.10.2 From e6c5fc53d0f44a772398402ee8a1879818e42b4e Mon Sep 17 00:00:00 2001 From: Zhu Yi Date: Thu, 15 Oct 2009 14:50:28 +0800 Subject: ipw2200: fix oops on missing firmware For non-monitor interfaces, the syntax for alloc_ieee80211/free_80211 is wrong. Because alloc_ieee80211 only creates (wiphy_new) a wiphy, but free_80211() does wiphy_unregister() also. This is only correct when the later wiphy_register() is called successfully, which apparently is not the case for your fw doesn't exist one. Signed-off-by: Zhu Yi Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c index 240cff1..a741d37 100644 --- a/drivers/net/wireless/ipw2x00/ipw2100.c +++ b/drivers/net/wireless/ipw2x00/ipw2100.c @@ -6325,8 +6325,10 @@ static int ipw2100_pci_init_one(struct pci_dev *pci_dev, fail: if (dev) { - if (registered) + if (registered) { + unregister_ieee80211(priv->ieee); unregister_netdev(dev); + } ipw2100_hw_stop_adapter(priv); @@ -6383,6 +6385,7 @@ static void __devexit ipw2100_pci_remove_one(struct pci_dev *pci_dev) /* Unregister the device first - this results in close() * being called if the device is open. If we free storage * first, then close() will crash. */ + unregister_ieee80211(priv->ieee); unregister_netdev(dev); /* ipw2100_down will ensure that there is no more pending work diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c index 8d58e6e..04341a2a 100644 --- a/drivers/net/wireless/ipw2x00/ipw2200.c +++ b/drivers/net/wireless/ipw2x00/ipw2200.c @@ -11821,6 +11821,7 @@ static int __devinit ipw_pci_probe(struct pci_dev *pdev, if (err) { IPW_ERROR("Failed to register promiscuous network " "device (error %d).\n", err); + unregister_ieee80211(priv->ieee); unregister_netdev(priv->net_dev); goto out_remove_sysfs; } @@ -11871,6 +11872,7 @@ static void __devexit ipw_pci_remove(struct pci_dev *pdev) mutex_unlock(&priv->mutex); + unregister_ieee80211(priv->ieee); unregister_netdev(priv->net_dev); if (priv->rxq) { diff --git a/drivers/net/wireless/ipw2x00/libipw.h b/drivers/net/wireless/ipw2x00/libipw.h index bf45391..f42ade6 100644 --- a/drivers/net/wireless/ipw2x00/libipw.h +++ b/drivers/net/wireless/ipw2x00/libipw.h @@ -1020,6 +1020,7 @@ static inline int libipw_is_cck_rate(u8 rate) /* ieee80211.c */ extern void free_ieee80211(struct net_device *dev, int monitor); extern struct net_device *alloc_ieee80211(int sizeof_priv, int monitor); +extern void unregister_ieee80211(struct libipw_device *ieee); extern int libipw_change_mtu(struct net_device *dev, int new_mtu); extern void libipw_networks_age(struct libipw_device *ieee, diff --git a/drivers/net/wireless/ipw2x00/libipw_module.c b/drivers/net/wireless/ipw2x00/libipw_module.c index a0e9f6a..be5b809 100644 --- a/drivers/net/wireless/ipw2x00/libipw_module.c +++ b/drivers/net/wireless/ipw2x00/libipw_module.c @@ -235,16 +235,19 @@ void free_ieee80211(struct net_device *dev, int monitor) libipw_networks_free(ieee); /* free cfg80211 resources */ - if (!monitor) { - wiphy_unregister(ieee->wdev.wiphy); - kfree(ieee->a_band.channels); - kfree(ieee->bg_band.channels); + if (!monitor) wiphy_free(ieee->wdev.wiphy); - } free_netdev(dev); } +void unregister_ieee80211(struct libipw_device *ieee) +{ + wiphy_unregister(ieee->wdev.wiphy); + kfree(ieee->a_band.channels); + kfree(ieee->bg_band.channels); +} + #ifdef CONFIG_LIBIPW_DEBUG static int debug = 0; @@ -330,3 +333,4 @@ module_init(libipw_init); EXPORT_SYMBOL(alloc_ieee80211); EXPORT_SYMBOL(free_ieee80211); +EXPORT_SYMBOL(unregister_ieee80211); -- cgit v0.10.2 From 227206455fde433f86305f9a5b8bdd1eca759929 Mon Sep 17 00:00:00 2001 From: Xose Vazquez Perez Date: Mon, 19 Oct 2009 11:51:11 +0200 Subject: rt73usb.c : more ids stolen from windows inf file(07/17/2009, 1.03.05.0000) Ovislink 0x1b75, 0x7318 MSI 0x0db0, 0x4600 WideTell 0x7167, 0x3840 Signed-off-by: Xose Vazquez Perez Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index b8f5ee3..14e7bb21 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -2389,10 +2389,13 @@ static struct usb_device_id rt73usb_device_table[] = { { USB_DEVICE(0x13b1, 0x0023), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x13b1, 0x0028), USB_DEVICE_DATA(&rt73usb_ops) }, /* MSI */ + { USB_DEVICE(0x0db0, 0x4600), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x0db0, 0x6877), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x0db0, 0x6874), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x0db0, 0xa861), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x0db0, 0xa874), USB_DEVICE_DATA(&rt73usb_ops) }, + /* Ovislink */ + { USB_DEVICE(0x1b75, 0x7318), USB_DEVICE_DATA(&rt73usb_ops) }, /* Ralink */ { USB_DEVICE(0x04bb, 0x093d), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt73usb_ops) }, @@ -2420,6 +2423,8 @@ static struct usb_device_id rt73usb_device_table[] = { /* Planex */ { USB_DEVICE(0x2019, 0xab01), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x2019, 0xab50), USB_DEVICE_DATA(&rt73usb_ops) }, + /* WideTell */ + { USB_DEVICE(0x7167, 0x3840), USB_DEVICE_DATA(&rt73usb_ops) }, /* Zcom */ { USB_DEVICE(0x0cde, 0x001c), USB_DEVICE_DATA(&rt73usb_ops) }, /* ZyXEL */ -- cgit v0.10.2 From f446d10f214091408b7300f15c9adf60569edf28 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 28 Oct 2009 15:12:32 +0100 Subject: mac80211: fix BSS leak The IBSS code leaks a BSS struct after telling cfg80211 about a given BSS by passing a frame. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index ca8ecce..f1362f3 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -73,6 +73,7 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt; u8 *pos; struct ieee80211_supported_band *sband; + struct cfg80211_bss *bss; u32 bss_change; u8 supp_rates[IEEE80211_MAX_SUPP_RATES]; @@ -177,8 +178,9 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, mod_timer(&ifibss->timer, round_jiffies(jiffies + IEEE80211_IBSS_MERGE_INTERVAL)); - cfg80211_inform_bss_frame(local->hw.wiphy, local->hw.conf.channel, - mgmt, skb->len, 0, GFP_KERNEL); + bss = cfg80211_inform_bss_frame(local->hw.wiphy, local->hw.conf.channel, + mgmt, skb->len, 0, GFP_KERNEL); + cfg80211_put_bss(bss); cfg80211_ibss_joined(sdata->dev, ifibss->bssid, GFP_KERNEL); } -- cgit v0.10.2 From 9a3f45116f5e08819136cd512fd7f6450ac22aa8 Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Wed, 28 Oct 2009 22:08:13 +0100 Subject: b43: Fix DMA TX bounce buffer copying b43 allocates a bouncebuffer, if the supplied TX skb is in an invalid memory range for DMA. However, this is broken in that it fails to copy over some metadata to the new skb. This patch fixes three problems: * Failure to adjust the ieee80211_tx_info pointer to the new buffer. This results in a kmemcheck warning. * Failure to copy the skb cb, which contains ieee80211_tx_info, to the new skb. This results in breakage of various TX-status postprocessing (Rate control). * Failure to transfer the queue mapping. This results in the wrong queue being stopped on saturation and can result in queue overflow. Signed-off-by: Michael Buesch Tested-by: Christian Casteyde Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c index 8701034..de4e804 100644 --- a/drivers/net/wireless/b43/dma.c +++ b/drivers/net/wireless/b43/dma.c @@ -1157,8 +1157,9 @@ struct b43_dmaring *parse_cookie(struct b43_wldev *dev, u16 cookie, int *slot) } static int dma_tx_fragment(struct b43_dmaring *ring, - struct sk_buff *skb) + struct sk_buff **in_skb) { + struct sk_buff *skb = *in_skb; const struct b43_dma_ops *ops = ring->ops; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); u8 *header; @@ -1224,8 +1225,14 @@ static int dma_tx_fragment(struct b43_dmaring *ring, } memcpy(skb_put(bounce_skb, skb->len), skb->data, skb->len); + memcpy(bounce_skb->cb, skb->cb, sizeof(skb->cb)); + bounce_skb->dev = skb->dev; + skb_set_queue_mapping(bounce_skb, skb_get_queue_mapping(skb)); + info = IEEE80211_SKB_CB(bounce_skb); + dev_kfree_skb_any(skb); skb = bounce_skb; + *in_skb = bounce_skb; meta->skb = skb; meta->dmaaddr = map_descbuffer(ring, skb->data, skb->len, 1); if (b43_dma_mapping_error(ring, meta->dmaaddr, skb->len, 1)) { @@ -1355,7 +1362,11 @@ int b43_dma_tx(struct b43_wldev *dev, struct sk_buff *skb) * static, so we don't need to store it per frame. */ ring->queue_prio = skb_get_queue_mapping(skb); - err = dma_tx_fragment(ring, skb); + /* dma_tx_fragment might reallocate the skb, so invalidate pointers pointing + * into the skb data or cb now. */ + hdr = NULL; + info = NULL; + err = dma_tx_fragment(ring, &skb); if (unlikely(err == -ENOKEY)) { /* Drop this packet, as we don't have the encryption key * anymore and must not transmit it unencrypted. */ -- cgit v0.10.2 From e55ea2b152569f09ef6bb28d5a341a4e5a21f5ce Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Wed, 28 Oct 2009 20:19:06 -0400 Subject: ath9k: fix misplaced semicolon on rate control The patch e43419f9: ath9k: downgrade assert in rc.c for invalid rate downgraded an ASSERT to a WARN_ON() but also misplaced a semicolon at the end of the second check. What this did was force the rate control code to always return the rate even if we should have warned about it. Since this should not have happened anymore anyway this fix isn't critical as the proper rate would have been returned anyway. Cc: stable@kernel.org Reported-by: Jiri Slaby Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c index 16a2717..1895d63 100644 --- a/drivers/net/wireless/ath/ath9k/rc.c +++ b/drivers/net/wireless/ath/ath9k/rc.c @@ -679,7 +679,7 @@ static u8 ath_rc_get_highest_rix(struct ath_softc *sc, return rate; if (rate_table->info[rate].valid_single_stream && - !(ath_rc_priv->ht_cap & WLAN_RC_DS_FLAG)); + !(ath_rc_priv->ht_cap & WLAN_RC_DS_FLAG)) return rate; /* This should not happen */ -- cgit v0.10.2 From 2171abc58644e09dbba546d91366b12743115396 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 29 Oct 2009 08:34:00 +0100 Subject: mac80211: fix addba timer The addba timer function acquires the sta spinlock, but at the same time we try to del_timer_sync() it under the spinlock which can produce deadlocks. To fix this, always del_timer_sync() the timer in ieee80211_process_addba_resp() and add it again after checking the conditions, if necessary. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c index bd765f3..b09948c 100644 --- a/net/mac80211/agg-tx.c +++ b/net/mac80211/agg-tx.c @@ -666,26 +666,25 @@ void ieee80211_process_addba_resp(struct ieee80211_local *local, state = &sta->ampdu_mlme.tid_state_tx[tid]; + del_timer_sync(&sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer); + spin_lock_bh(&sta->lock); - if (!(*state & HT_ADDBA_REQUESTED_MSK)) { - spin_unlock_bh(&sta->lock); - return; - } + if (!(*state & HT_ADDBA_REQUESTED_MSK)) + goto timer_still_needed; if (mgmt->u.action.u.addba_resp.dialog_token != sta->ampdu_mlme.tid_tx[tid]->dialog_token) { - spin_unlock_bh(&sta->lock); #ifdef CONFIG_MAC80211_HT_DEBUG printk(KERN_DEBUG "wrong addBA response token, tid %d\n", tid); #endif /* CONFIG_MAC80211_HT_DEBUG */ - return; + goto timer_still_needed; } - del_timer_sync(&sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer); #ifdef CONFIG_MAC80211_HT_DEBUG printk(KERN_DEBUG "switched off addBA timer for tid %d \n", tid); #endif /* CONFIG_MAC80211_HT_DEBUG */ + if (le16_to_cpu(mgmt->u.action.u.addba_resp.status) == WLAN_STATUS_SUCCESS) { u8 curstate = *state; @@ -699,5 +698,11 @@ void ieee80211_process_addba_resp(struct ieee80211_local *local, } else { ___ieee80211_stop_tx_ba_session(sta, tid, WLAN_BACK_INITIATOR); } + + goto out; + + timer_still_needed: + add_timer(&sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer); + out: spin_unlock_bh(&sta->lock); } -- cgit v0.10.2 From 372362ade2fe5c33d749e017f1c5bc8140769a3e Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 29 Oct 2009 10:09:28 +0100 Subject: mac80211: fix reason code output endianness When HT debugging is enabled and we receive a DelBA frame we print out the reason code in the wrong byte order. Fix that so we don't get weird values printed. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c index 0891bfb..48ef1a2 100644 --- a/net/mac80211/ht.c +++ b/net/mac80211/ht.c @@ -153,7 +153,7 @@ void ieee80211_process_delba(struct ieee80211_sub_if_data *sdata, if (net_ratelimit()) printk(KERN_DEBUG "delba from %pM (%s) tid %d reason code %d\n", mgmt->sa, initiator ? "initiator" : "recipient", tid, - mgmt->u.action.u.delba.reason_code); + le16_to_cpu(mgmt->u.action.u.delba.reason_code)); #endif /* CONFIG_MAC80211_HT_DEBUG */ if (initiator == WLAN_BACK_INITIATOR) -- cgit v0.10.2 From e9024a059f2c17fb2bfab212ee9d31511d7b8e57 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Fri, 30 Oct 2009 17:45:14 +0000 Subject: libertas if_usb: Fix crash on 64-bit machines On a 64-bit kernel, skb->tail is an offset, not a pointer. The libertas usb driver passes it to usb_fill_bulk_urb() anyway, causing interesting crashes. Fix that by using skb->data instead. This highlights a problem with usb_fill_bulk_urb(). It doesn't notice when dma_map_single() fails and return the error to its caller as it should. In fact it _can't_ currently return the error, since it returns void. So this problem was showing up only at unmap time, after we'd already suffered memory corruption by doing DMA to a bogus address. Signed-off-by: David Woodhouse Cc: stable@kernel.org Acked-by: David S. Miller Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/libertas/if_usb.c b/drivers/net/wireless/libertas/if_usb.c index 92bc8c5..3fac4ef 100644 --- a/drivers/net/wireless/libertas/if_usb.c +++ b/drivers/net/wireless/libertas/if_usb.c @@ -508,7 +508,7 @@ static int __if_usb_submit_rx_urb(struct if_usb_card *cardp, /* Fill the receive configuration URB and initialise the Rx call back */ usb_fill_bulk_urb(cardp->rx_urb, cardp->udev, usb_rcvbulkpipe(cardp->udev, cardp->ep_in), - (void *) (skb->tail + (size_t) IPFIELD_ALIGN_OFFSET), + skb->data + IPFIELD_ALIGN_OFFSET, MRVDRV_ETH_RX_PACKET_BUFFER_SIZE, callbackfn, cardp); -- cgit v0.10.2 From 412145947adfca60a4b5b4893fbae82dffa25edd Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 29 Oct 2009 12:16:22 +0000 Subject: tty: Mark generic_serial users as BROKEN There isn't much else I can do with these. I can find no hardware for any of them and no users. The code is broken. Signed-off-by: Alan Cox Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 29dd848..ecdc19a 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -561,7 +561,7 @@ config HPAPCI config MVME147_SCC bool "SCC support for MVME147 serial ports" - depends on MVME147 + depends on MVME147 && BROKEN help This is the driver for the serial ports on the Motorola MVME147 boards. Everyone using one of these boards should say Y here. @@ -576,14 +576,14 @@ config SERIAL167 config MVME162_SCC bool "SCC support for MVME162 serial ports" - depends on MVME16x + depends on MVME16x && BROKEN help This is the driver for the serial ports on the Motorola MVME162 and 172 boards. Everyone using one of these boards should say Y here. config BVME6000_SCC bool "SCC support for BVME6000 serial ports" - depends on BVME6000 + depends on BVME6000 && BROKEN help This is the driver for the serial ports on the BVME4000 and BVME6000 boards from BVM Ltd. Everyone using one of these boards should say diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 08a6f50..6aad99e 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -323,7 +323,7 @@ config SPECIALIX config SX tristate "Specialix SX (and SI) card support" - depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA) + depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA) && BROKEN help This is a driver for the SX and SI multiport serial cards. Please read the file for details. @@ -334,7 +334,7 @@ config SX config RIO tristate "Specialix RIO system support" - depends on SERIAL_NONSTANDARD + depends on SERIAL_NONSTANDARD && BROKEN help This is a driver for the Specialix RIO, a smart serial card which drives an outboard box that can support up to 128 ports. Product @@ -395,7 +395,7 @@ config NOZOMI config A2232 tristate "Commodore A2232 serial support (EXPERIMENTAL)" - depends on EXPERIMENTAL && ZORRO && BROKEN_ON_SMP + depends on EXPERIMENTAL && ZORRO && BROKEN ---help--- This option supports the 2232 7-port serial card shipped with the Amiga 2000 and other Zorro-bus machines, dating from 1989. At -- cgit v0.10.2 From 9bd0591be06a6a8e2f63c1dba4a64704c9d2002f Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 9 Oct 2009 15:47:50 -0700 Subject: Staging: hv TODO patches Update for more items Signed-off-by: Stephen Hemminger Cc: Hank Janssen Cc: Haiyang Zhang . Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/hv/TODO b/drivers/staging/hv/TODO index 4d390b2..dbfbde9 100644 --- a/drivers/staging/hv/TODO +++ b/drivers/staging/hv/TODO @@ -1,11 +1,17 @@ TODO: - fix remaining checkpatch warnings and errors + - use of /** when it is not a kerneldoc header - remove RingBuffer.c to us in-kernel ringbuffer functions instead. - audit the vmbus to verify it is working properly with the driver model + - convert vmbus driver interface function pointer tables + to constant, a.k.a vmbus_ops - see if the vmbus can be merged with the other virtual busses in the kernel - audit the network driver + - use existing net_device_stats struct in network device + - checking for carrier inside open is wrong, network device API + confusion?? - audit the block driver - audit the scsi driver -- cgit v0.10.2 From 1bb40a25b26ef7e2c4fb79ce430de2b9f836527f Mon Sep 17 00:00:00 2001 From: Haiyang Zhang Date: Fri, 23 Oct 2009 18:14:24 +0000 Subject: Staging: hv: Fix null pointer error after vmbus loading Fix null pointer error after vmbus loading. Remove code that checks for dev_name, the affected structure is kzalloc-ed prior to this routine, so it is always null at this stage. Signed-off-by: Hank Janssen Signed-off-by: Haiyang Zhang Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/hv/vmbus_drv.c b/drivers/staging/hv/vmbus_drv.c index 582318f..270fb7f 100644 --- a/drivers/staging/hv/vmbus_drv.c +++ b/drivers/staging/hv/vmbus_drv.c @@ -537,18 +537,7 @@ static int vmbus_child_device_register(struct hv_device *root_device_obj, DPRINT_DBG(VMBUS_DRV, "child device (%p) registering", child_device_ctx); - /* Make sure we are not registered already */ - if (strlen(dev_name(&child_device_ctx->device)) != 0) { - DPRINT_ERR(VMBUS_DRV, - "child device (%p) already registered - busid %s", - child_device_ctx, - dev_name(&child_device_ctx->device)); - - ret = -1; - goto Cleanup; - } - - /* Set the device bus id. Otherwise, device_register()will fail. */ + /* Set the device name. Otherwise, device_register() will fail. */ dev_set_name(&child_device_ctx->device, "vmbus_0_%d", atomic_inc_return(&device_num)); @@ -573,7 +562,6 @@ static int vmbus_child_device_register(struct hv_device *root_device_obj, DPRINT_INFO(VMBUS_DRV, "child device (%p) registered", &child_device_ctx->device); -Cleanup: DPRINT_EXIT(VMBUS_DRV); return ret; -- cgit v0.10.2 From 78f98ba9cef4cad6122fc88efd18c2771844df98 Mon Sep 17 00:00:00 2001 From: Hank Janssen Date: Fri, 16 Oct 2009 20:11:36 +0000 Subject: Staging: hv: Fix vmbus load hang caused by faulty data packing Fix vmbus load hang caused by wrong data packing. Signed-off-by: Hank Janssen Signed-off-by: Haiyang Zhang Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/hv/ChannelMgmt.h b/drivers/staging/hv/ChannelMgmt.h index a839d8f..2782328 100644 --- a/drivers/staging/hv/ChannelMgmt.h +++ b/drivers/staging/hv/ChannelMgmt.h @@ -54,7 +54,7 @@ enum vmbus_channel_message_type { ChannelMessageViewRangeRemove = 18, #endif ChannelMessageCount -} __attribute__((packed)); +}; struct vmbus_channel_message_header { enum vmbus_channel_message_type MessageType; -- cgit v0.10.2 From 9fb5cce4d6a24a3c1b3d567f77ba991efdf72796 Mon Sep 17 00:00:00 2001 From: Milan Dadok Date: Wed, 28 Oct 2009 23:23:27 +0100 Subject: Staging: hv: fix oops in vmbus - udev events Fix typos in udev event send and guid variables copy Signed-off-by: Milan Dadok Cc: Hank Janssen Cc: Haiyang Zhang Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/hv/vmbus_drv.c b/drivers/staging/hv/vmbus_drv.c index 270fb7f..894eecf 100644 --- a/drivers/staging/hv/vmbus_drv.c +++ b/drivers/staging/hv/vmbus_drv.c @@ -507,12 +507,12 @@ static struct hv_device *vmbus_child_device_create(struct hv_guid *type, child_device_obj = &child_device_ctx->device_obj; child_device_obj->context = context; - memcpy(&child_device_obj->deviceType, &type, sizeof(struct hv_guid)); - memcpy(&child_device_obj->deviceInstance, &instance, + memcpy(&child_device_obj->deviceType, type, sizeof(struct hv_guid)); + memcpy(&child_device_obj->deviceInstance, instance, sizeof(struct hv_guid)); - memcpy(&child_device_ctx->class_id, &type, sizeof(struct hv_guid)); - memcpy(&child_device_ctx->device_id, &instance, sizeof(struct hv_guid)); + memcpy(&child_device_ctx->class_id, type, sizeof(struct hv_guid)); + memcpy(&child_device_ctx->device_id, instance, sizeof(struct hv_guid)); DPRINT_EXIT(VMBUS_DRV); @@ -611,8 +611,6 @@ static void vmbus_child_device_destroy(struct hv_device *device_obj) static int vmbus_uevent(struct device *device, struct kobj_uevent_env *env) { struct device_context *device_ctx = device_to_device_context(device); - int i = 0; - int len = 0; int ret; DPRINT_ENTER(VMBUS_DRV); @@ -632,8 +630,6 @@ static int vmbus_uevent(struct device *device, struct kobj_uevent_env *env) device_ctx->class_id.data[14], device_ctx->class_id.data[15]); - env->envp_idx = i; - env->buflen = len; ret = add_uevent_var(env, "VMBUS_DEVICE_CLASS_GUID={" "%02x%02x%02x%02x-%02x%02x-%02x%02x-" "%02x%02x%02x%02x%02x%02x%02x%02x}", @@ -679,8 +675,6 @@ static int vmbus_uevent(struct device *device, struct kobj_uevent_env *env) if (ret) return ret; - env->envp[env->envp_idx] = NULL; - DPRINT_EXIT(VMBUS_DRV); return 0; -- cgit v0.10.2 From 92ec0893ad0996a534a5b605659d3ca31cf5dfd9 Mon Sep 17 00:00:00 2001 From: Milan Dadok Date: Wed, 28 Oct 2009 23:23:37 +0100 Subject: Staging: hv: fix oops in vmbus - netvsc list_head Remove incorrect list_head usage. Variable of type list_head was used in some function's arguments as list item. Signed-off-by: Milan Dadok Cc: Hank Janssen Cc: Haiyang Zhang Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/hv/NetVsc.c b/drivers/staging/hv/NetVsc.c index 1610b84..d384c0d 100644 --- a/drivers/staging/hv/NetVsc.c +++ b/drivers/staging/hv/NetVsc.c @@ -1052,7 +1052,7 @@ static void NetVscOnReceive(struct hv_device *Device, */ spin_lock_irqsave(&netDevice->receive_packet_list_lock, flags); while (!list_empty(&netDevice->ReceivePacketList)) { - list_move_tail(&netDevice->ReceivePacketList, &listHead); + list_move_tail(netDevice->ReceivePacketList.next, &listHead); if (++count == vmxferpagePacket->RangeCount + 1) break; } @@ -1071,7 +1071,7 @@ static void NetVscOnReceive(struct hv_device *Device, /* Return it to the freelist */ spin_lock_irqsave(&netDevice->receive_packet_list_lock, flags); for (i = count; i != 0; i--) { - list_move_tail(&listHead, + list_move_tail(listHead.next, &netDevice->ReceivePacketList); } spin_unlock_irqrestore(&netDevice->receive_packet_list_lock, @@ -1085,8 +1085,7 @@ static void NetVscOnReceive(struct hv_device *Device, } /* Remove the 1st packet to represent the xfer page packet itself */ - xferpagePacket = list_entry(&listHead, struct xferpage_packet, - ListEntry); + xferpagePacket = (struct xferpage_packet*)listHead.next; list_del(&xferpagePacket->ListEntry); /* This is how much we can satisfy */ @@ -1102,8 +1101,7 @@ static void NetVscOnReceive(struct hv_device *Device, /* Each range represents 1 RNDIS pkt that contains 1 ethernet frame */ for (i = 0; i < (count - 1); i++) { - netvscPacket = list_entry(&listHead, struct hv_netvsc_packet, - ListEntry); + netvscPacket = (struct hv_netvsc_packet*)listHead.next; list_del(&netvscPacket->ListEntry); /* Initialize the netvsc packet */ -- cgit v0.10.2 From 9fcfeab4e99c0e26df7426dbc6530d741934ed83 Mon Sep 17 00:00:00 2001 From: Milan Dadok Date: Wed, 28 Oct 2009 23:23:50 +0100 Subject: Staging: hv: fix oops in vmbus - missing #include Add missing #includes to make hv module compile successfull. Signed-off-by: Milan Dadok Cc: Hank Janssen Cc: Haiyang Zhang Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/hv/ChannelMgmt.h b/drivers/staging/hv/ChannelMgmt.h index 2782328..fa973d8 100644 --- a/drivers/staging/hv/ChannelMgmt.h +++ b/drivers/staging/hv/ChannelMgmt.h @@ -26,6 +26,7 @@ #define _CHANNEL_MGMT_H_ #include +#include #include "RingBuffer.h" #include "VmbusChannelInterface.h" #include "VmbusPacketFormat.h" diff --git a/drivers/staging/hv/osd.h b/drivers/staging/hv/osd.h index 9504604..ce064e8 100644 --- a/drivers/staging/hv/osd.h +++ b/drivers/staging/hv/osd.h @@ -25,6 +25,7 @@ #ifndef _OSD_H_ #define _OSD_H_ +#include /* Defines */ #define ALIGN_UP(value, align) (((value) & (align-1)) ? \ -- cgit v0.10.2 From 0b0595bfdaae1f19a052ceee2a63c307793b9c22 Mon Sep 17 00:00:00 2001 From: Peter Huewe Date: Tue, 29 Sep 2009 01:22:40 +0200 Subject: Staging: Panel: prevent driver from calling misc_deregister twice on same ressource This patch prevents the driver from calling misc_deregister twice on the same ressouce when unloading the driver. Unloading the driver without this patch results in a Kernel BUG like this: Panel driver version 0.9.5 registered on parport0 (io=0x378). BUG: unable to handle kernel paging request at 0000000000100108 IP: [] misc_deregister+0x2d/0x90 PGD 6caff067 PUD 762b7067 PMD 0 Oops: 0002 [#1] PREEMPT SMP last sysfs file: /sys/devices/platform/w83627hf.656/in8_input ... This patch fixes this issue, although maybe not in the best way possible :) linux version v2.6.32-rc1 - linus git tree, Di 29. Sep 01:10:18 CEST 2009 Signed-off-by: Peter Huewe Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/panel/panel.c b/drivers/staging/panel/panel.c index dd7d3fd..4ce399b 100644 --- a/drivers/staging/panel/panel.c +++ b/drivers/staging/panel/panel.c @@ -2071,11 +2071,15 @@ static void panel_detach(struct parport *port) return; } - if (keypad_enabled && keypad_initialized) + if (keypad_enabled && keypad_initialized) { misc_deregister(&keypad_dev); + keypad_initialized = 0; + } - if (lcd_enabled && lcd_initialized) + if (lcd_enabled && lcd_initialized) { misc_deregister(&lcd_dev); + lcd_initialized = 0; + } parport_release(pprt); parport_unregister_device(pprt); @@ -2211,13 +2215,16 @@ static void __exit panel_cleanup_module(void) del_timer(&scan_timer); if (pprt != NULL) { - if (keypad_enabled) + if (keypad_enabled) { misc_deregister(&keypad_dev); + keypad_initialized = 0; + } if (lcd_enabled) { panel_lcd_print("\x0cLCD driver " PANEL_VERSION "\nunloaded.\x1b[Lc\x1b[Lb\x1b[L-"); misc_deregister(&lcd_dev); + lcd_initialized = 0; } /* TODO: free all input signals */ -- cgit v0.10.2 From 557c0288b59a7b81513de4242b893654c70d636c Mon Sep 17 00:00:00 2001 From: miaofng Date: Tue, 29 Sep 2009 15:02:53 +0800 Subject: Staging: vt6656: fix the memory free bug in vntwusb_disconnect() This patch is used to solve the memory bug when people plug out the wusb card then plug in. Error logs are following: root@smdk2440:~# ifdown eth1 AP deauthed me, reason=2. Config_FileOperation file Not exist Zone=[1][J][P]!! WPA: Terminating root@smdk2440:~# ----> !!!!!!!!!!!!!!here plug out the wusbcard usb 1-1: USB disconnect, address 4 ----> !!!!!!!!!!!!!!!!!!!here plug in the wusb card usb 1-1: new full speed USB device using s3c2410-ohci and address 5 usb 1-1: New USB device found, idVendor=160a, idProduct=3184 usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1: Product: VNT USB-802.11 Wireless LAN Adapter usb 1-1: Manufacturer: VIA Networking Technologies, Inc. usb 1-1: configuration #1 chosen from 1 choice VIA Networking Wireless LAN USB Driver Ver. 1.19_12 Copyright (c) 2004 VIA Networking Technologies, Inc. kernel BUG at mm/slab.c:2974! Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 817 [#1] PREEMPT Modules linked in: vt6656_stage CPU: 0 Not tainted (2.6.32-rc2 #14) PC is at __bug+0x1c/0x28 LR is at __bug+0x18/0x28 pc : [] lr : [] psr: 40000093 sp : c3867c68 ip : c3867bd0 fp : c3866000 r10: c3800600 r9 : c3802430 r8 : 00000004 r7 : c3802428 r6 : c3802660 r5 : c3802420 r4 : a0000013 r3 : 00000000 r2 : c3866000 r1 : 00000003 r0 : 00000024 Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 0000717f Table: 330a8000 DAC: 00000017 Process khubd (pid: 152, stack limit = 0xc3866270) Stack: (0xc3867c68 to 0xc3868000) 7c60: c0093fdc c0094088 000000d0 000000d0 00000000 000080d0 7c80: 00000000 a0000013 c39ebec0 c3800600 000080d0 00000001 c03f13cc 00000006 7ca0: c02b36f0 c0094574 c0043428 0001c9de c39ebec0 c39ebea0 c3000c00 c02a6a84 7cc0: 89705f41 c3000c00 c39ebec0 c39ebea0 c3000c00 bf036f24 c39ebec8 00000006 7ce0: 00000000 c3000c00 c39ebec0 c39ebea0 c3000c00 bf036f24 c39ebec8 00000006 7d00: 00000000 bf003398 c00aa514 c3867d20 0000a1ff c00e1448 c39d9f84 c39aabe8 7d20: c3867d50 c00e1888 c39aabe8 c39ebea0 c39ebec0 bf036ebc c3000c00 bf036f24 7d40: 0000bec8 01000000 00000000 c39ebea0 c39ebec0 bf036ebc c3000c00 bf036f24 7d60: c39ebec8 00000000 00000000 c0223798 c39ebec0 c01daa14 bf036eec c3867da0 7d80: c045a4f8 c01da6e4 c39ebec0 00000000 c01daa14 c39ebec0 c3867da0 c01d9870 7da0: c38331a8 c39fcb94 c005b3b4 c39ebec0 c39ebec0 c39ebef4 00000000 c01da890 7dc0: c39ebec0 c39ebec0 c3000c00 c01d97f4 00000000 c01d8470 c39ebea0 c3000c68 7de0: 00000000 c3000c68 c3218a00 c3abcd20 00000001 c39ebec0 c39ebea0 c3000c00 7e00: 00000000 c3000c68 c3218a00 c3abcd20 00000001 c0221ee8 00000001 00000000 7e20: 00000000 00000000 00001388 00000000 c3000c04 c3000c68 c3bc29c0 00000001 7e40: c3bc29c4 00000001 c03f4af8 00000000 c39fe780 c3000c00 00000001 c045ab04 7e60: c3867eb8 c045a3bc c3000c70 00000000 00000000 c0229238 c3000c68 c0223210 7e80: c3000c00 c045aaf0 c045ab04 c0223230 c3000c68 c01daa14 c045ab04 c01da6e4 7ea0: c3000c68 00000000 c01daa14 c3000c68 c3867eb8 c01d9870 c38331a8 c3862f54 7ec0: c005b3b4 c3000c68 c3000c68 c3000c9c 00000002 c01da890 c3867ef9 c3000c68 7ee0: c3829f60 c01d97f4 00000000 c01d8470 c38918e0 c3aaf468 39383102 c300343a 7f00: 00000001 c0219660 c03f1768 c3000c00 00000000 c3000c68 00000002 c3aaf814 7f20: 00000001 00000101 c38918e0 c021b6e0 00000002 00000000 00000000 c3000c00 7f40: c38917c0 c021c418 00000064 00000064 00000101 c3867f60 c005b920 c3867f94 7f60: c3891830 c3aaf400 c3866000 c3aaf400 c3aaf800 00000000 c38918e0 c3aaf400 7f80: 00000012 00000000 00000000 c3837920 c00574a0 c3867f94 c3867f94 00000101 7fa0: 01010001 c3867fd4 c381bf48 c3867fd4 c381bf48 00000000 c021ba3c 00000000 7fc0: 00000000 00000000 00000000 c00573dc 00000000 00000000 c3867fd8 c3867fd8 7fe0: 00000000 00000000 00000000 00000000 00000000 c002ce88 00000000 ffff0000 [] (__bug+0x1c/0x28) from [] (cache_alloc_refill+0x13c/0x594) [] (cache_alloc_refill+0x13c/0x594) from [] (__kmalloc+0x94/0xd0) [] (__kmalloc+0x94/0xd0) from [] (alloc_netdev_mq+0x48/0x1b0) [] (alloc_netdev_mq+0x48/0x1b0) from [] (vntwusb_found1+0x58/0x53c [vt6656_stage]) [] (vntwusb_found1+0x58/0x53c [vt6656_stage]) from [] (usb_probe_interface+0x130/0x180) [] (usb_probe_interface+0x130/0x180) from [] (driver_probe_device+0xac/0x164) [] (driver_probe_device+0xac/0x164) from [] (bus_for_each_drv+0x50/0x90) [] (bus_for_each_drv+0x50/0x90) from [] (device_attach+0x50/0x68) [] (device_attach+0x50/0x68) from [] (bus_probe_device+0x28/0x54) [] (bus_probe_device+0x28/0x54) from [] (device_add+0x3b4/0x4f0) [] (device_add+0x3b4/0x4f0) from [] (usb_set_configuration+0x524/0x5b8) [] (usb_set_configuration+0x524/0x5b8) from [] (generic_probe+0x5c/0xa0) [] (generic_probe+0x5c/0xa0) from [] (usb_probe_device+0x48/0x54) [] (usb_probe_device+0x48/0x54) from [] (driver_probe_device+0xac/0x164) [] (driver_probe_device+0xac/0x164) from [] (bus_for_each_drv+0x50/0x90) [] (bus_for_each_drv+0x50/0x90) from [] (device_attach+0x50/0x68) [] (device_attach+0x50/0x68) from [] (bus_probe_device+0x28/0x54) [] (bus_probe_device+0x28/0x54) from [] (device_add+0x3b4/0x4f0) [] (device_add+0x3b4/0x4f0) from [] (usb_new_device+0x100/0x174) [] (usb_new_device+0x100/0x174) from [] (hub_thread+0x9dc/0xeec) [] (hub_thread+0x9dc/0xeec) from [] (kthread+0x78/0x80) [] (kthread+0x78/0x80) from [] (kernel_thread_exit+0x0/0x8) Code: e1a01000 e59f000c eb005014 e3a03000 (e5833000) ---[ end trace 2a51e0dbab9e4fbe ]--- note: khubd[152] exited with preempt_count 1 Signed-off-by: miaofng Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/vt6656/main_usb.c b/drivers/staging/vt6656/main_usb.c index 7f96bca..0518611 100644 --- a/drivers/staging/vt6656/main_usb.c +++ b/drivers/staging/vt6656/main_usb.c @@ -1332,7 +1332,6 @@ device_release_WPADEV(pDevice); free_netdev(pDevice->dev); } - kfree(pDevice); DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "device_disconnect3.. \n"); } -- cgit v0.10.2 From a010a3375227efbd6b8ac11b99c34c807a77c45a Mon Sep 17 00:00:00 2001 From: Herton Ronaldo Krzesinski Date: Fri, 2 Oct 2009 11:03:38 -0300 Subject: Staging: rtl8187se/rtl8192e/rtl8192su: allow module unload On rtl81* additions, they had its wireless stack made builtin instead of separated modules. But try_module_get/module_put in stack were kept, they are uneeded with the stack builtin and makes rtl81* modules impossible to remove on a system with an rtl81* card. request_module calls are also uneeded with stack builtin, so remove them too. Signed-off-by: Herton Ronaldo Krzesinski Cc: Bartlomiej Zolnierkiewicz Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.c index 013c3e1..4c5d63f 100644 --- a/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.c +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.c @@ -53,10 +53,8 @@ void ieee80211_crypt_deinit_entries(struct ieee80211_device *ieee, list_del(ptr); - if (entry->ops) { + if (entry->ops) entry->ops->deinit(entry->priv); - module_put(entry->ops->owner); - } kfree(entry); } } diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_module.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_module.c index 6fbe489..18392fc 100644 --- a/drivers/staging/rtl8187se/ieee80211/ieee80211_module.c +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_module.c @@ -189,10 +189,8 @@ void free_ieee80211(struct net_device *dev) for (i = 0; i < WEP_KEYS; i++) { struct ieee80211_crypt_data *crypt = ieee->crypt[i]; if (crypt) { - if (crypt->ops) { + if (crypt->ops) crypt->ops->deinit(crypt->priv); - module_put(crypt->ops->owner); - } kfree(crypt); ieee->crypt[i] = NULL; } diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c index 59b2ab4..334e4c7 100644 --- a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c @@ -2839,16 +2839,12 @@ static int ieee80211_wpa_set_encryption(struct ieee80211_device *ieee, goto skip_host_crypt; ops = ieee80211_get_crypto_ops(param->u.crypt.alg); - if (ops == NULL && strcmp(param->u.crypt.alg, "WEP") == 0) { - request_module("ieee80211_crypt_wep"); + if (ops == NULL && strcmp(param->u.crypt.alg, "WEP") == 0) ops = ieee80211_get_crypto_ops(param->u.crypt.alg); - } else if (ops == NULL && strcmp(param->u.crypt.alg, "TKIP") == 0) { - request_module("ieee80211_crypt_tkip"); + else if (ops == NULL && strcmp(param->u.crypt.alg, "TKIP") == 0) ops = ieee80211_get_crypto_ops(param->u.crypt.alg); - } else if (ops == NULL && strcmp(param->u.crypt.alg, "CCMP") == 0) { - request_module("ieee80211_crypt_ccmp"); + else if (ops == NULL && strcmp(param->u.crypt.alg, "CCMP") == 0) ops = ieee80211_get_crypto_ops(param->u.crypt.alg); - } if (ops == NULL) { printk("unknown crypto alg '%s'\n", param->u.crypt.alg); param->u.crypt.err = IEEE_CRYPT_ERR_UNKNOWN_ALG; @@ -2869,7 +2865,7 @@ static int ieee80211_wpa_set_encryption(struct ieee80211_device *ieee, } memset(new_crypt, 0, sizeof(struct ieee80211_crypt_data)); new_crypt->ops = ops; - if (new_crypt->ops && try_module_get(new_crypt->ops->owner)) + if (new_crypt->ops) new_crypt->priv = new_crypt->ops->init(param->u.crypt.idx); diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c index 8d8bdd0..a08b97a 100644 --- a/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c @@ -331,12 +331,10 @@ int ieee80211_wx_set_encode(struct ieee80211_device *ieee, return -ENOMEM; memset(new_crypt, 0, sizeof(struct ieee80211_crypt_data)); new_crypt->ops = ieee80211_get_crypto_ops("WEP"); - if (!new_crypt->ops) { - request_module("ieee80211_crypt_wep"); + if (!new_crypt->ops) new_crypt->ops = ieee80211_get_crypto_ops("WEP"); - } - if (new_crypt->ops && try_module_get(new_crypt->ops->owner)) + if (new_crypt->ops) new_crypt->priv = new_crypt->ops->init(key); if (!new_crypt->ops || !new_crypt->priv) { @@ -483,7 +481,7 @@ int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee, struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; int i, idx, ret = 0; int group_key = 0; - const char *alg, *module; + const char *alg; struct ieee80211_crypto_ops *ops; struct ieee80211_crypt_data **crypt; @@ -539,15 +537,12 @@ int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee, switch (ext->alg) { case IW_ENCODE_ALG_WEP: alg = "WEP"; - module = "ieee80211_crypt_wep"; break; case IW_ENCODE_ALG_TKIP: alg = "TKIP"; - module = "ieee80211_crypt_tkip"; break; case IW_ENCODE_ALG_CCMP: alg = "CCMP"; - module = "ieee80211_crypt_ccmp"; break; default: IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n", @@ -558,10 +553,8 @@ int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee, // printk("8-09-08-9=====>%s, alg name:%s\n",__func__, alg); ops = ieee80211_get_crypto_ops(alg); - if (ops == NULL) { - request_module(module); + if (ops == NULL) ops = ieee80211_get_crypto_ops(alg); - } if (ops == NULL) { IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n", dev->name, ext->alg); @@ -581,7 +574,7 @@ int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee, goto done; } new_crypt->ops = ops; - if (new_crypt->ops && try_module_get(new_crypt->ops->owner)) + if (new_crypt->ops) new_crypt->priv = new_crypt->ops->init(idx); if (new_crypt->priv == NULL) { kfree(new_crypt); diff --git a/drivers/staging/rtl8192e/ieee80211/ieee80211_crypt.c b/drivers/staging/rtl8192e/ieee80211/ieee80211_crypt.c index 1a8ea8a..b1c5493 100644 --- a/drivers/staging/rtl8192e/ieee80211/ieee80211_crypt.c +++ b/drivers/staging/rtl8192e/ieee80211/ieee80211_crypt.c @@ -53,14 +53,8 @@ void ieee80211_crypt_deinit_entries(struct ieee80211_device *ieee, list_del(ptr); - if (entry->ops) { + if (entry->ops) entry->ops->deinit(entry->priv); -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) - module_put(entry->ops->owner); -#else - __MOD_DEC_USE_COUNT(entry->ops->owner); -#endif - } kfree(entry); } } diff --git a/drivers/staging/rtl8192e/ieee80211/ieee80211_module.c b/drivers/staging/rtl8192e/ieee80211/ieee80211_module.c index 16256a3..12c2a18 100644 --- a/drivers/staging/rtl8192e/ieee80211/ieee80211_module.c +++ b/drivers/staging/rtl8192e/ieee80211/ieee80211_module.c @@ -242,14 +242,8 @@ void free_ieee80211(struct net_device *dev) for (i = 0; i < WEP_KEYS; i++) { struct ieee80211_crypt_data *crypt = ieee->crypt[i]; if (crypt) { - if (crypt->ops) { + if (crypt->ops) crypt->ops->deinit(crypt->priv); -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) - module_put(crypt->ops->owner); -#else - __MOD_DEC_USE_COUNT(crypt->ops->owner); -#endif - } kfree(crypt); ieee->crypt[i] = NULL; } diff --git a/drivers/staging/rtl8192e/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8192e/ieee80211/ieee80211_softmac.c index 2fc04df..eae7c45 100644 --- a/drivers/staging/rtl8192e/ieee80211/ieee80211_softmac.c +++ b/drivers/staging/rtl8192e/ieee80211/ieee80211_softmac.c @@ -3284,17 +3284,14 @@ static int ieee80211_wpa_set_encryption(struct ieee80211_device *ieee, goto skip_host_crypt; ops = ieee80211_get_crypto_ops(param->u.crypt.alg); - if (ops == NULL && strcmp(param->u.crypt.alg, "WEP") == 0) { - request_module("ieee80211_crypt_wep"); + if (ops == NULL && strcmp(param->u.crypt.alg, "WEP") == 0) ops = ieee80211_get_crypto_ops(param->u.crypt.alg); - //set WEP40 first, it will be modified according to WEP104 or WEP40 at other place - } else if (ops == NULL && strcmp(param->u.crypt.alg, "TKIP") == 0) { - request_module("ieee80211_crypt_tkip"); + /* set WEP40 first, it will be modified according to WEP104 or + * WEP40 at other place */ + else if (ops == NULL && strcmp(param->u.crypt.alg, "TKIP") == 0) ops = ieee80211_get_crypto_ops(param->u.crypt.alg); - } else if (ops == NULL && strcmp(param->u.crypt.alg, "CCMP") == 0) { - request_module("ieee80211_crypt_ccmp"); + else if (ops == NULL && strcmp(param->u.crypt.alg, "CCMP") == 0) ops = ieee80211_get_crypto_ops(param->u.crypt.alg); - } if (ops == NULL) { printk("unknown crypto alg '%s'\n", param->u.crypt.alg); param->u.crypt.err = IEEE_CRYPT_ERR_UNKNOWN_ALG; @@ -3315,11 +3312,7 @@ static int ieee80211_wpa_set_encryption(struct ieee80211_device *ieee, } memset(new_crypt, 0, sizeof(struct ieee80211_crypt_data)); new_crypt->ops = ops; -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) - if (new_crypt->ops && try_module_get(new_crypt->ops->owner)) -#else - if (new_crypt->ops && try_inc_mod_count(new_crypt->ops->owner)) -#endif + if (new_crypt->ops) new_crypt->priv = new_crypt->ops->init(param->u.crypt.idx); diff --git a/drivers/staging/rtl8192e/ieee80211/ieee80211_wx.c b/drivers/staging/rtl8192e/ieee80211/ieee80211_wx.c index 2234831..4e34a1f 100644 --- a/drivers/staging/rtl8192e/ieee80211/ieee80211_wx.c +++ b/drivers/staging/rtl8192e/ieee80211/ieee80211_wx.c @@ -482,15 +482,9 @@ int ieee80211_wx_set_encode(struct ieee80211_device *ieee, return -ENOMEM; memset(new_crypt, 0, sizeof(struct ieee80211_crypt_data)); new_crypt->ops = ieee80211_get_crypto_ops("WEP"); - if (!new_crypt->ops) { - request_module("ieee80211_crypt_wep"); + if (!new_crypt->ops) new_crypt->ops = ieee80211_get_crypto_ops("WEP"); - } -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) - if (new_crypt->ops && try_module_get(new_crypt->ops->owner)) -#else - if (new_crypt->ops && try_inc_mod_count(new_crypt->ops->owner)) -#endif + if (new_crypt->ops) new_crypt->priv = new_crypt->ops->init(key); if (!new_crypt->ops || !new_crypt->priv) { @@ -644,7 +638,7 @@ int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee, struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; int i, idx; int group_key = 0; - const char *alg, *module; + const char *alg; struct ieee80211_crypto_ops *ops; struct ieee80211_crypt_data **crypt; @@ -711,15 +705,12 @@ int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee, switch (ext->alg) { case IW_ENCODE_ALG_WEP: alg = "WEP"; - module = "ieee80211_crypt_wep"; break; case IW_ENCODE_ALG_TKIP: alg = "TKIP"; - module = "ieee80211_crypt_tkip"; break; case IW_ENCODE_ALG_CCMP: alg = "CCMP"; - module = "ieee80211_crypt_ccmp"; break; default: IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n", @@ -730,10 +721,8 @@ int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee, printk("alg name:%s\n",alg); ops = ieee80211_get_crypto_ops(alg); - if (ops == NULL) { - request_module(module); + if (ops == NULL) ops = ieee80211_get_crypto_ops(alg); - } if (ops == NULL) { IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n", dev->name, ext->alg); @@ -758,7 +747,7 @@ int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee, goto done; } new_crypt->ops = ops; - if (new_crypt->ops && try_module_get(new_crypt->ops->owner)) + if (new_crypt->ops) new_crypt->priv = new_crypt->ops->init(idx); if (new_crypt->priv == NULL) { kfree(new_crypt); diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_crypt.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_crypt.c index d76a54d..521e7b9 100644 --- a/drivers/staging/rtl8192su/ieee80211/ieee80211_crypt.c +++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_crypt.c @@ -53,10 +53,8 @@ void ieee80211_crypt_deinit_entries(struct ieee80211_device *ieee, list_del(ptr); - if (entry->ops) { + if (entry->ops) entry->ops->deinit(entry->priv); - module_put(entry->ops->owner); - } kfree(entry); } } diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_module.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_module.c index 68dc8fa..c3383bb 100644 --- a/drivers/staging/rtl8192su/ieee80211/ieee80211_module.c +++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_module.c @@ -216,10 +216,8 @@ void free_ieee80211(struct net_device *dev) for (i = 0; i < WEP_KEYS; i++) { struct ieee80211_crypt_data *crypt = ieee->crypt[i]; if (crypt) { - if (crypt->ops) { + if (crypt->ops) crypt->ops->deinit(crypt->priv); - module_put(crypt->ops->owner); - } kfree(crypt); ieee->crypt[i] = NULL; } diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac.c index c64ae03..fd8e112 100644 --- a/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac.c +++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac.c @@ -3026,17 +3026,14 @@ static int ieee80211_wpa_set_encryption(struct ieee80211_device *ieee, goto skip_host_crypt; ops = ieee80211_get_crypto_ops(param->u.crypt.alg); - if (ops == NULL && strcmp(param->u.crypt.alg, "WEP") == 0) { - request_module("ieee80211_crypt_wep"); + if (ops == NULL && strcmp(param->u.crypt.alg, "WEP") == 0) ops = ieee80211_get_crypto_ops(param->u.crypt.alg); - //set WEP40 first, it will be modified according to WEP104 or WEP40 at other place - } else if (ops == NULL && strcmp(param->u.crypt.alg, "TKIP") == 0) { - request_module("ieee80211_crypt_tkip"); + /* set WEP40 first, it will be modified according to WEP104 or + * WEP40 at other place */ + else if (ops == NULL && strcmp(param->u.crypt.alg, "TKIP") == 0) ops = ieee80211_get_crypto_ops(param->u.crypt.alg); - } else if (ops == NULL && strcmp(param->u.crypt.alg, "CCMP") == 0) { - request_module("ieee80211_crypt_ccmp"); + else if (ops == NULL && strcmp(param->u.crypt.alg, "CCMP") == 0) ops = ieee80211_get_crypto_ops(param->u.crypt.alg); - } if (ops == NULL) { printk("unknown crypto alg '%s'\n", param->u.crypt.alg); param->u.crypt.err = IEEE_CRYPT_ERR_UNKNOWN_ALG; @@ -3058,7 +3055,7 @@ static int ieee80211_wpa_set_encryption(struct ieee80211_device *ieee, memset(new_crypt, 0, sizeof(struct ieee80211_crypt_data)); new_crypt->ops = ops; - if (new_crypt->ops && try_module_get(new_crypt->ops->owner)) + if (new_crypt->ops) new_crypt->priv = new_crypt->ops->init(param->u.crypt.idx); diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_wx.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_wx.c index 1077590..6146c64 100644 --- a/drivers/staging/rtl8192su/ieee80211/ieee80211_wx.c +++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_wx.c @@ -358,11 +358,9 @@ int ieee80211_wx_set_encode(struct ieee80211_device *ieee, return -ENOMEM; memset(new_crypt, 0, sizeof(struct ieee80211_crypt_data)); new_crypt->ops = ieee80211_get_crypto_ops("WEP"); - if (!new_crypt->ops) { - request_module("ieee80211_crypt_wep"); + if (!new_crypt->ops) new_crypt->ops = ieee80211_get_crypto_ops("WEP"); - } - if (new_crypt->ops && try_module_get(new_crypt->ops->owner)) + if (new_crypt->ops) new_crypt->priv = new_crypt->ops->init(key); if (!new_crypt->ops || !new_crypt->priv) { @@ -507,7 +505,7 @@ int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee, struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; int i, idx; int group_key = 0; - const char *alg, *module; + const char *alg; struct ieee80211_crypto_ops *ops; struct ieee80211_crypt_data **crypt; @@ -570,15 +568,12 @@ int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee, switch (ext->alg) { case IW_ENCODE_ALG_WEP: alg = "WEP"; - module = "ieee80211_crypt_wep"; break; case IW_ENCODE_ALG_TKIP: alg = "TKIP"; - module = "ieee80211_crypt_tkip"; break; case IW_ENCODE_ALG_CCMP: alg = "CCMP"; - module = "ieee80211_crypt_ccmp"; break; default: IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n", @@ -589,10 +584,8 @@ int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee, printk("alg name:%s\n",alg); ops = ieee80211_get_crypto_ops(alg); - if (ops == NULL) { - request_module("%s", module); + if (ops == NULL) ops = ieee80211_get_crypto_ops(alg); - } if (ops == NULL) { IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n", dev->name, ext->alg); @@ -612,7 +605,7 @@ int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee, goto done; } new_crypt->ops = ops; - if (new_crypt->ops && try_module_get(new_crypt->ops->owner)) + if (new_crypt->ops) new_crypt->priv = new_crypt->ops->init(idx); if (new_crypt->priv == NULL) { kfree(new_crypt); -- cgit v0.10.2 From 9ab1b56aa02aa4d578232a8addc785c91e7b2bac Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 26 Oct 2009 16:35:32 -0700 Subject: Staging: remove stlc45xx driver It's no longer needed as the p54spi driver is the same thing, under a different name and in the correct portion of the kernel tree. Cc: Javier Martinez Canillas Cc: Christian Lamparter Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index 7df3ba4..d21b346 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -93,8 +93,6 @@ source "drivers/staging/dst/Kconfig" source "drivers/staging/pohmelfs/Kconfig" -source "drivers/staging/stlc45xx/Kconfig" - source "drivers/staging/b3dfg/Kconfig" source "drivers/staging/phison/Kconfig" diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index 7475711..8cbf1ae 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -29,7 +29,6 @@ obj-$(CONFIG_ANDROID) += android/ obj-$(CONFIG_ANDROID) += dream/ obj-$(CONFIG_DST) += dst/ obj-$(CONFIG_POHMELFS) += pohmelfs/ -obj-$(CONFIG_STLC45XX) += stlc45xx/ obj-$(CONFIG_B3DFG) += b3dfg/ obj-$(CONFIG_IDE_PHISON) += phison/ obj-$(CONFIG_PLAN9AUTH) += p9auth/ diff --git a/drivers/staging/stlc45xx/Kconfig b/drivers/staging/stlc45xx/Kconfig deleted file mode 100644 index 947fb75..0000000 --- a/drivers/staging/stlc45xx/Kconfig +++ /dev/null @@ -1,8 +0,0 @@ -config STLC45XX - tristate "stlc4550/4560 support" - depends on MAC80211 && WLAN_80211 && SPI_MASTER && GENERIC_HARDIRQS - ---help--- - This is a driver for stlc4550 and stlc4560 chipsets. - - To compile this driver as a module, choose M here: the module will be - called stlc45xx. If unsure, say N. diff --git a/drivers/staging/stlc45xx/Makefile b/drivers/staging/stlc45xx/Makefile deleted file mode 100644 index 7ee3290..0000000 --- a/drivers/staging/stlc45xx/Makefile +++ /dev/null @@ -1 +0,0 @@ -obj-$(CONFIG_STLC45XX) += stlc45xx.o diff --git a/drivers/staging/stlc45xx/stlc45xx.c b/drivers/staging/stlc45xx/stlc45xx.c deleted file mode 100644 index be99eb3..0000000 --- a/drivers/staging/stlc45xx/stlc45xx.c +++ /dev/null @@ -1,2594 +0,0 @@ -/* - * This file is part of stlc45xx - * - * Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies). - * - * Contact: Kalle Valo - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#include "stlc45xx.h" - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "stlc45xx_lmac.h" - -/* - * gpios should be handled in board files and provided via platform data, - * but because it's currently impossible for stlc45xx to have a header file - * in include/linux, let's use module paramaters for now - */ -static int stlc45xx_gpio_power = 97; -module_param(stlc45xx_gpio_power, int, 0444); -MODULE_PARM_DESC(stlc45xx_gpio_power, "stlc45xx gpio number for power line"); - -static int stlc45xx_gpio_irq = 87; -module_param(stlc45xx_gpio_irq, int, 0444); -MODULE_PARM_DESC(stlc45xx_gpio_irq, "stlc45xx gpio number for irq line"); - -static const u8 default_cal_channels[] = { - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x6c, 0x09, - 0x00, 0x00, 0xc9, 0xff, 0xd8, 0xff, 0x00, 0x00, 0x00, 0x01, 0x10, - 0x01, 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, 0xe0, 0x00, 0xe0, 0x00, - 0xe0, 0x00, 0xe0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0xd0, - 0x00, 0x54, 0x01, 0xab, 0xf6, 0xc0, 0x42, 0xc0, 0x42, 0xc0, 0x42, - 0xc0, 0x42, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, - 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x22, 0x01, 0x37, 0xa9, - 0xc0, 0x33, 0xc0, 0x33, 0xc0, 0x33, 0xc0, 0x33, 0x00, 0xbc, 0x00, - 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, - 0x00, 0xbc, 0xfb, 0x00, 0xca, 0x79, 0xc0, 0x2b, 0xc0, 0x2b, 0xc0, - 0x2b, 0xc0, 0x2b, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, - 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0xd0, 0x00, 0x5d, - 0x54, 0xc0, 0x21, 0xc0, 0x21, 0xc0, 0x21, 0xc0, 0x21, 0x00, 0xaa, - 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, - 0xaa, 0x00, 0xaa, 0xa7, 0x00, 0xa9, 0x3d, 0xc0, 0x17, 0xc0, 0x17, - 0xc0, 0x17, 0xc0, 0x17, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, - 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x7a, 0x00, - 0x06, 0x2c, 0xc0, 0x0d, 0xc0, 0x0d, 0xc0, 0x0d, 0xc0, 0x0d, 0x00, - 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, - 0x00, 0x96, 0x00, 0x96, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x06, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x71, 0x09, 0x00, 0x00, 0xc9, 0xff, 0xd8, - 0xff, 0x00, 0x00, 0x00, 0x01, 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, - 0x10, 0x01, 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, 0xd0, - 0x00, 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0x54, 0x01, 0xab, 0xf6, - 0xc0, 0x42, 0xc0, 0x42, 0xc0, 0x42, 0xc0, 0x42, 0x00, 0xcb, 0x00, - 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, - 0x00, 0xcb, 0x22, 0x01, 0x37, 0xa9, 0xc0, 0x33, 0xc0, 0x33, 0xc0, - 0x33, 0xc0, 0x33, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, - 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0xfb, 0x00, 0xca, - 0x79, 0xc0, 0x2b, 0xc0, 0x2b, 0xc0, 0x2b, 0xc0, 0x2b, 0x00, 0xb4, - 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, - 0xb4, 0x00, 0xb4, 0xd0, 0x00, 0x5d, 0x54, 0xc0, 0x21, 0xc0, 0x21, - 0xc0, 0x21, 0xc0, 0x21, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, - 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0xa7, 0x00, - 0xa9, 0x3d, 0xc0, 0x17, 0xc0, 0x17, 0xc0, 0x17, 0xc0, 0x17, 0x00, - 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, - 0x00, 0xa0, 0x00, 0xa0, 0x7a, 0x00, 0x06, 0x2c, 0xc0, 0x0d, 0xc0, - 0x0d, 0xc0, 0x0d, 0xc0, 0x0d, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, - 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x80, 0x80, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x76, - 0x09, 0x00, 0x00, 0xc9, 0xff, 0xd8, 0xff, 0x00, 0x00, 0x00, 0x01, - 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, 0xf0, 0x00, 0xf0, - 0x00, 0xf0, 0x00, 0xf0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, - 0xd0, 0x00, 0x54, 0x01, 0xab, 0xf6, 0xc0, 0x42, 0xc0, 0x42, 0xc0, - 0x42, 0xc0, 0x42, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, - 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x22, 0x01, 0x37, - 0xa9, 0xc0, 0x33, 0xc0, 0x33, 0xc0, 0x33, 0xc0, 0x33, 0x00, 0xbc, - 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, - 0xbc, 0x00, 0xbc, 0xfb, 0x00, 0xca, 0x79, 0xc0, 0x2b, 0xc0, 0x2b, - 0xc0, 0x2b, 0xc0, 0x2b, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, - 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0xd0, 0x00, - 0x5d, 0x54, 0xc0, 0x21, 0xc0, 0x21, 0xc0, 0x21, 0xc0, 0x21, 0x00, - 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, - 0x00, 0xaa, 0x00, 0xaa, 0xa7, 0x00, 0xa9, 0x3d, 0xc0, 0x17, 0xc0, - 0x17, 0xc0, 0x17, 0xc0, 0x17, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, - 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x7a, - 0x00, 0x06, 0x2c, 0xc0, 0x0d, 0xc0, 0x0d, 0xc0, 0x0d, 0xc0, 0x0d, - 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, - 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x06, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x7b, 0x09, 0x00, 0x00, 0xc9, 0xff, - 0xd8, 0xff, 0x00, 0x00, 0x00, 0x01, 0x10, 0x01, 0x10, 0x01, 0x10, - 0x01, 0x10, 0x01, 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, - 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0x54, 0x01, 0xab, - 0xf6, 0xc0, 0x42, 0xc0, 0x42, 0xc0, 0x42, 0xc0, 0x42, 0x00, 0xcb, - 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, - 0xcb, 0x00, 0xcb, 0x22, 0x01, 0x37, 0xa9, 0xc0, 0x33, 0xc0, 0x33, - 0xc0, 0x33, 0xc0, 0x33, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, - 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0xfb, 0x00, - 0xca, 0x79, 0xc0, 0x2b, 0xc0, 0x2b, 0xc0, 0x2b, 0xc0, 0x2b, 0x00, - 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, - 0x00, 0xb4, 0x00, 0xb4, 0xd0, 0x00, 0x5d, 0x54, 0xc0, 0x21, 0xc0, - 0x21, 0xc0, 0x21, 0xc0, 0x21, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, - 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0xa7, - 0x00, 0xa9, 0x3d, 0xc0, 0x17, 0xc0, 0x17, 0xc0, 0x17, 0xc0, 0x17, - 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, - 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x7a, 0x00, 0x06, 0x2c, 0xc0, 0x0d, - 0xc0, 0x0d, 0xc0, 0x0d, 0xc0, 0x0d, 0x00, 0x96, 0x00, 0x96, 0x00, - 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x80, - 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x80, 0x09, 0x00, 0x00, 0xc9, 0xff, 0xd8, 0xff, 0x00, 0x00, 0x00, - 0x01, 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, 0xf0, 0x00, - 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0xd0, - 0x00, 0xd0, 0x00, 0x54, 0x01, 0xab, 0xf6, 0xc0, 0x42, 0xc0, 0x42, - 0xc0, 0x42, 0xc0, 0x42, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, - 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x22, 0x01, - 0x37, 0xa9, 0xc0, 0x33, 0xc0, 0x33, 0xc0, 0x33, 0xc0, 0x33, 0x00, - 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, - 0x00, 0xbc, 0x00, 0xbc, 0xfb, 0x00, 0xca, 0x79, 0xc0, 0x2b, 0xc0, - 0x2b, 0xc0, 0x2b, 0xc0, 0x2b, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, - 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0xd0, - 0x00, 0x5d, 0x54, 0xc0, 0x21, 0xc0, 0x21, 0xc0, 0x21, 0xc0, 0x21, - 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, - 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0xa7, 0x00, 0xa9, 0x3d, 0xc0, 0x17, - 0xc0, 0x17, 0xc0, 0x17, 0xc0, 0x17, 0x00, 0xa0, 0x00, 0xa0, 0x00, - 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, - 0x7a, 0x00, 0x06, 0x2c, 0xc0, 0x0d, 0xc0, 0x0d, 0xc0, 0x0d, 0xc0, - 0x0d, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, - 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x06, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x85, 0x09, 0x00, 0x00, 0xc9, - 0xff, 0xd8, 0xff, 0x00, 0x00, 0x00, 0x01, 0x10, 0x01, 0x10, 0x01, - 0x10, 0x01, 0x10, 0x01, 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, 0xf0, - 0x00, 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0x54, 0x01, - 0xab, 0xf6, 0xc0, 0x42, 0xc0, 0x42, 0xc0, 0x42, 0xc0, 0x42, 0x00, - 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, - 0x00, 0xcb, 0x00, 0xcb, 0x22, 0x01, 0x37, 0xa9, 0xc0, 0x33, 0xc0, - 0x33, 0xc0, 0x33, 0xc0, 0x33, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, - 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0xfb, - 0x00, 0xca, 0x79, 0xc0, 0x2b, 0xc0, 0x2b, 0xc0, 0x2b, 0xc0, 0x2b, - 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, - 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0xd0, 0x00, 0x5d, 0x54, 0xc0, 0x21, - 0xc0, 0x21, 0xc0, 0x21, 0xc0, 0x21, 0x00, 0xaa, 0x00, 0xaa, 0x00, - 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, - 0xa7, 0x00, 0xa9, 0x3d, 0xc0, 0x17, 0xc0, 0x17, 0xc0, 0x17, 0xc0, - 0x17, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, - 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x7a, 0x00, 0x06, 0x2c, 0xc0, - 0x0d, 0xc0, 0x0d, 0xc0, 0x0d, 0xc0, 0x0d, 0x00, 0x96, 0x00, 0x96, - 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, - 0x96, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, - 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x8a, 0x09, 0x00, 0x00, 0xc9, 0xff, 0xd8, 0xff, 0x00, 0x00, - 0x00, 0x01, 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, 0xf0, - 0x00, 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, 0xd0, 0x00, 0xd0, 0x00, - 0xd0, 0x00, 0xd0, 0x00, 0x54, 0x01, 0xab, 0xf6, 0xc0, 0x42, 0xc0, - 0x42, 0xc0, 0x42, 0xc0, 0x42, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, - 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x22, - 0x01, 0x37, 0xa9, 0xc0, 0x33, 0xc0, 0x33, 0xc0, 0x33, 0xc0, 0x33, - 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, - 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0xfb, 0x00, 0xca, 0x79, 0xc0, 0x2b, - 0xc0, 0x2b, 0xc0, 0x2b, 0xc0, 0x2b, 0x00, 0xb4, 0x00, 0xb4, 0x00, - 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, - 0xd0, 0x00, 0x5d, 0x54, 0xc0, 0x21, 0xc0, 0x21, 0xc0, 0x21, 0xc0, - 0x21, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, - 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0xa7, 0x00, 0xa9, 0x3d, 0xc0, - 0x17, 0xc0, 0x17, 0xc0, 0x17, 0xc0, 0x17, 0x00, 0xa0, 0x00, 0xa0, - 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, - 0xa0, 0x7a, 0x00, 0x06, 0x2c, 0xc0, 0x0d, 0xc0, 0x0d, 0xc0, 0x0d, - 0xc0, 0x0d, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, - 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x80, 0x80, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x09, 0x00, 0x00, - 0xc9, 0xff, 0xd8, 0xff, 0x00, 0x00, 0x00, 0x01, 0x10, 0x01, 0x10, - 0x01, 0x10, 0x01, 0x10, 0x01, 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, - 0xf0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0x54, - 0x01, 0xab, 0xf6, 0xc0, 0x42, 0xc0, 0x42, 0xc0, 0x42, 0xc0, 0x42, - 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, - 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x22, 0x01, 0x37, 0xa9, 0xc0, 0x33, - 0xc0, 0x33, 0xc0, 0x33, 0xc0, 0x33, 0x00, 0xbc, 0x00, 0xbc, 0x00, - 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, - 0xfb, 0x00, 0xca, 0x79, 0xc0, 0x2b, 0xc0, 0x2b, 0xc0, 0x2b, 0xc0, - 0x2b, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, - 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0xd0, 0x00, 0x5d, 0x54, 0xc0, - 0x21, 0xc0, 0x21, 0xc0, 0x21, 0xc0, 0x21, 0x00, 0xaa, 0x00, 0xaa, - 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, - 0xaa, 0xa7, 0x00, 0xa9, 0x3d, 0xc0, 0x17, 0xc0, 0x17, 0xc0, 0x17, - 0xc0, 0x17, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, - 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x7a, 0x00, 0x06, 0x2c, - 0xc0, 0x0d, 0xc0, 0x0d, 0xc0, 0x0d, 0xc0, 0x0d, 0x00, 0x96, 0x00, - 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, - 0x00, 0x96, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x06, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x94, 0x09, 0x00, 0x00, 0xc9, 0xff, 0xd8, 0xff, 0x00, - 0x00, 0x00, 0x01, 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, - 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, 0xd0, 0x00, 0xd0, - 0x00, 0xd0, 0x00, 0xd0, 0x00, 0x54, 0x01, 0xab, 0xf6, 0xc0, 0x42, - 0xc0, 0x42, 0xc0, 0x42, 0xc0, 0x42, 0x00, 0xcb, 0x00, 0xcb, 0x00, - 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, - 0x22, 0x01, 0x37, 0xa9, 0xc0, 0x33, 0xc0, 0x33, 0xc0, 0x33, 0xc0, - 0x33, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, - 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0xfb, 0x00, 0xca, 0x79, 0xc0, - 0x2b, 0xc0, 0x2b, 0xc0, 0x2b, 0xc0, 0x2b, 0x00, 0xb4, 0x00, 0xb4, - 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, - 0xb4, 0xd0, 0x00, 0x5d, 0x54, 0xc0, 0x21, 0xc0, 0x21, 0xc0, 0x21, - 0xc0, 0x21, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, - 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0xa7, 0x00, 0xa9, 0x3d, - 0xc0, 0x17, 0xc0, 0x17, 0xc0, 0x17, 0xc0, 0x17, 0x00, 0xa0, 0x00, - 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, - 0x00, 0xa0, 0x7a, 0x00, 0x06, 0x2c, 0xc0, 0x0d, 0xc0, 0x0d, 0xc0, - 0x0d, 0xc0, 0x0d, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, - 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x80, 0x80, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x99, 0x09, 0x00, - 0x00, 0xc9, 0xff, 0xd8, 0xff, 0x00, 0x00, 0x00, 0x01, 0x10, 0x01, - 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, 0xf0, 0x00, 0xf0, 0x00, 0xf0, - 0x00, 0xf0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, - 0x54, 0x01, 0xab, 0xf6, 0xc0, 0x42, 0xc0, 0x42, 0xc0, 0x42, 0xc0, - 0x42, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, - 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x22, 0x01, 0x37, 0xa9, 0xc0, - 0x33, 0xc0, 0x33, 0xc0, 0x33, 0xc0, 0x33, 0x00, 0xbc, 0x00, 0xbc, - 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, - 0xbc, 0xfb, 0x00, 0xca, 0x79, 0xc0, 0x2b, 0xc0, 0x2b, 0xc0, 0x2b, - 0xc0, 0x2b, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, - 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0xd0, 0x00, 0x5d, 0x54, - 0xc0, 0x21, 0xc0, 0x21, 0xc0, 0x21, 0xc0, 0x21, 0x00, 0xaa, 0x00, - 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, - 0x00, 0xaa, 0xa7, 0x00, 0xa9, 0x3d, 0xc0, 0x17, 0xc0, 0x17, 0xc0, - 0x17, 0xc0, 0x17, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, - 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x7a, 0x00, 0x06, - 0x2c, 0xc0, 0x0d, 0xc0, 0x0d, 0xc0, 0x0d, 0xc0, 0x0d, 0x00, 0x96, - 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, - 0x96, 0x00, 0x96, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x06, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x9e, 0x09, 0x00, 0x00, 0xc9, 0xff, 0xd8, 0xff, - 0x00, 0x00, 0x00, 0x01, 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, 0x10, - 0x01, 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, 0xd0, 0x00, - 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0x54, 0x01, 0xab, 0xf6, 0xc0, - 0x42, 0xc0, 0x42, 0xc0, 0x42, 0xc0, 0x42, 0x00, 0xcb, 0x00, 0xcb, - 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, - 0xcb, 0x22, 0x01, 0x37, 0xa9, 0xc0, 0x33, 0xc0, 0x33, 0xc0, 0x33, - 0xc0, 0x33, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, - 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0xfb, 0x00, 0xca, 0x79, - 0xc0, 0x2b, 0xc0, 0x2b, 0xc0, 0x2b, 0xc0, 0x2b, 0x00, 0xb4, 0x00, - 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, - 0x00, 0xb4, 0xd0, 0x00, 0x5d, 0x54, 0xc0, 0x21, 0xc0, 0x21, 0xc0, - 0x21, 0xc0, 0x21, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, - 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0xa7, 0x00, 0xa9, - 0x3d, 0xc0, 0x17, 0xc0, 0x17, 0xc0, 0x17, 0xc0, 0x17, 0x00, 0xa0, - 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, - 0xa0, 0x00, 0xa0, 0x7a, 0x00, 0x06, 0x2c, 0xc0, 0x0d, 0xc0, 0x0d, - 0xc0, 0x0d, 0xc0, 0x0d, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, - 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x80, 0x80, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00 }; - -static const u8 default_cal_rssi[] = { - 0x0a, 0x01, 0x72, 0xfe, 0x1a, 0x00, 0x00, 0x00, 0x0a, 0x01, 0x72, - 0xfe, 0x1a, 0x00, 0x00, 0x00, 0x0a, 0x01, 0x72, 0xfe, 0x1a, 0x00, - 0x00, 0x00, 0x0a, 0x01, 0x72, 0xfe, 0x1a, 0x00, 0x00, 0x00, 0x0a, - 0x01, 0x72, 0xfe, 0x1a, 0x00, 0x00, 0x00, 0x0a, 0x01, 0x72, 0xfe, - 0x1a, 0x00, 0x00, 0x00, 0x0a, 0x01, 0x72, 0xfe, 0x1a, 0x00, 0x00, - 0x00, 0x0a, 0x01, 0x72, 0xfe, 0x1a, 0x00, 0x00, 0x00, 0x0a, 0x01, - 0x72, 0xfe, 0x1a, 0x00, 0x00, 0x00, 0x0a, 0x01, 0x72, 0xfe, 0x1a, - 0x00, 0x00, 0x00, 0x0a, 0x01, 0x72, 0xfe, 0x1a, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00 }; - -static void stlc45xx_tx_edcf(struct stlc45xx *stlc); -static void stlc45xx_tx_setup(struct stlc45xx *stlc); -static void stlc45xx_tx_scan(struct stlc45xx *stlc); -static void stlc45xx_tx_psm(struct stlc45xx *stlc, bool enable); -static int stlc45xx_tx_nullfunc(struct stlc45xx *stlc, bool powersave); -static int stlc45xx_tx_pspoll(struct stlc45xx *stlc, bool powersave); - -static ssize_t stlc45xx_sysfs_show_cal_rssi(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct stlc45xx *stlc = dev_get_drvdata(dev); - ssize_t len; - - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - len = PAGE_SIZE; - - mutex_lock(&stlc->mutex); - - if (stlc->cal_rssi) - hex_dump_to_buffer(stlc->cal_rssi, RSSI_CAL_ARRAY_LEN, 16, - 2, buf, len, 0); - mutex_unlock(&stlc->mutex); - - len = strlen(buf); - - return len; -} - -static ssize_t stlc45xx_sysfs_store_cal_rssi(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct stlc45xx *stlc = dev_get_drvdata(dev); - - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - mutex_lock(&stlc->mutex); - - if (count != RSSI_CAL_ARRAY_LEN) { - stlc45xx_error("invalid cal_rssi length: %zu", count); - count = 0; - goto out_unlock; - } - - kfree(stlc->cal_rssi); - - stlc->cal_rssi = kmemdup(buf, RSSI_CAL_ARRAY_LEN, GFP_KERNEL); - - if (!stlc->cal_rssi) { - stlc45xx_error("failed to allocate memory for cal_rssi"); - count = 0; - goto out_unlock; - } - - out_unlock: - mutex_unlock(&stlc->mutex); - - return count; -} - -static ssize_t stlc45xx_sysfs_show_cal_channels(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct stlc45xx *stlc = dev_get_drvdata(dev); - ssize_t len; - - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - len = PAGE_SIZE; - - mutex_lock(&stlc->mutex); - - if (stlc->cal_channels) - hex_dump_to_buffer(stlc->cal_channels, CHANNEL_CAL_ARRAY_LEN, - 16, 2, buf, len, 0); - - mutex_unlock(&stlc->mutex); - - len = strlen(buf); - - return len; -} - -static ssize_t stlc45xx_sysfs_store_cal_channels(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct stlc45xx *stlc = dev_get_drvdata(dev); - - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - mutex_lock(&stlc->mutex); - - if (count != CHANNEL_CAL_ARRAY_LEN) { - stlc45xx_error("invalid cal_channels size: %zu ", count); - count = 0; - goto out_unlock; - } - - kfree(stlc->cal_channels); - - stlc->cal_channels = kmemdup(buf, count, GFP_KERNEL); - - if (!stlc->cal_channels) { - stlc45xx_error("failed to allocate memory for cal_channels"); - count = 0; - goto out_unlock; - } - -out_unlock: - mutex_unlock(&stlc->mutex); - - return count; -} - -static ssize_t stlc45xx_sysfs_show_tx_buf(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct stlc45xx *stlc = dev_get_drvdata(dev); - struct txbuffer *entry; - ssize_t len = 0; - - stlc45xx_debug(DEBUG_FUNC, "%s()", __func__); - - mutex_lock(&stlc->mutex); - - list_for_each_entry(entry, &stlc->tx_sent, tx_list) { - len += sprintf(buf + len, "0x%x: 0x%x-0x%x\n", - entry->handle, entry->start, - entry->end); - } - - mutex_unlock(&stlc->mutex); - - return len; -} - -static DEVICE_ATTR(cal_rssi, S_IRUGO | S_IWUSR, - stlc45xx_sysfs_show_cal_rssi, - stlc45xx_sysfs_store_cal_rssi); -static DEVICE_ATTR(cal_channels, S_IRUGO | S_IWUSR, - stlc45xx_sysfs_show_cal_channels, - stlc45xx_sysfs_store_cal_channels); -static DEVICE_ATTR(tx_buf, S_IRUGO, stlc45xx_sysfs_show_tx_buf, NULL); - -static void stlc45xx_spi_read(struct stlc45xx *stlc, unsigned long addr, - void *buf, size_t len) -{ - struct spi_transfer t[2]; - struct spi_message m; - - /* We first push the address */ - addr = (addr << 8) | ADDR_READ_BIT_15; - - spi_message_init(&m); - memset(t, 0, sizeof(t)); - - t[0].tx_buf = &addr; - t[0].len = 2; - spi_message_add_tail(&t[0], &m); - - t[1].rx_buf = buf; - t[1].len = len; - spi_message_add_tail(&t[1], &m); - - spi_sync(stlc->spi, &m); -} - - -static void stlc45xx_spi_write(struct stlc45xx *stlc, unsigned long addr, - void *buf, size_t len) -{ - struct spi_transfer t[3]; - struct spi_message m; - u16 last_word; - - /* We first push the address */ - addr = addr << 8; - - spi_message_init(&m); - memset(t, 0, sizeof(t)); - - t[0].tx_buf = &addr; - t[0].len = 2; - spi_message_add_tail(&t[0], &m); - - t[1].tx_buf = buf; - t[1].len = len; - spi_message_add_tail(&t[1], &m); - - if (len % 2) { - last_word = ((u8 *)buf)[len - 1]; - - t[2].tx_buf = &last_word; - t[2].len = 2; - spi_message_add_tail(&t[2], &m); - } - - spi_sync(stlc->spi, &m); -} - -static u16 stlc45xx_read16(struct stlc45xx *stlc, unsigned long addr) -{ - u16 val; - - stlc45xx_spi_read(stlc, addr, &val, sizeof(val)); - - return val; -} - -static u32 stlc45xx_read32(struct stlc45xx *stlc, unsigned long addr) -{ - u32 val; - - stlc45xx_spi_read(stlc, addr, &val, sizeof(val)); - - return val; -} - -static void stlc45xx_write16(struct stlc45xx *stlc, unsigned long addr, u16 val) -{ - stlc45xx_spi_write(stlc, addr, &val, sizeof(val)); -} - -static void stlc45xx_write32(struct stlc45xx *stlc, unsigned long addr, u32 val) -{ - stlc45xx_spi_write(stlc, addr, &val, sizeof(val)); -} - -struct stlc45xx_spi_reg { - u16 address; - u16 length; - char *name; -}; - -/* caller must hold tx_lock */ -static void stlc45xx_txbuffer_dump(struct stlc45xx *stlc) -{ - struct txbuffer *txbuffer; - char *buf, *pos; - int buf_len, l, count; - - if (!(DEBUG_LEVEL & DEBUG_TXBUFFER)) - return; - - stlc45xx_debug(DEBUG_FUNC, "%s()", __func__); - - buf_len = 500; - buf = kmalloc(buf_len, GFP_ATOMIC); - if (!buf) - return; - - pos = buf; - count = 0; - - list_for_each_entry(txbuffer, &stlc->txbuffer, buffer_list) { - l = snprintf(pos, buf_len, "0x%x-0x%x,", - txbuffer->start, txbuffer->end); - /* drop the null byte */ - pos += l; - buf_len -= l; - count++; - } - - if (count == 0) - *pos = '\0'; - else - *--pos = '\0'; - - stlc45xx_debug(DEBUG_TXBUFFER, "txbuffer: in buffer %d regions: %s", - count, buf); - - kfree(buf); -} - -/* caller must hold tx_lock */ -static int stlc45xx_txbuffer_find(struct stlc45xx *stlc, size_t len) -{ - struct txbuffer *txbuffer; - int pos; - - stlc45xx_debug(DEBUG_FUNC, "%s()", __func__); - - pos = FIRMWARE_TXBUFFER_START; - - if (list_empty(&stlc->txbuffer)) - goto out; - - /* - * the entries in txbuffer must be in the same order as they are in - * the real buffer - */ - list_for_each_entry(txbuffer, &stlc->txbuffer, buffer_list) { - if (pos + len < txbuffer->start) - break; - pos = ALIGN(txbuffer->end + 1, 4); - } - - if (pos + len > FIRMWARE_TXBUFFER_END) - /* not enough room */ - pos = -1; - - stlc45xx_debug(DEBUG_TXBUFFER, "txbuffer: find %zu B: 0x%x", len, pos); - -out: - return pos; -} - -static int stlc45xx_txbuffer_add(struct stlc45xx *stlc, - struct txbuffer *txbuffer) -{ - struct txbuffer *r, *prev = NULL; - - if (list_empty(&stlc->txbuffer)) { - list_add(&txbuffer->buffer_list, &stlc->txbuffer); - return 0; - } - - r = list_first_entry(&stlc->txbuffer, struct txbuffer, buffer_list); - - if (txbuffer->start < r->start) { - /* add to the beginning of the list */ - list_add(&txbuffer->buffer_list, &stlc->txbuffer); - return 0; - } - - prev = NULL; - list_for_each_entry(r, &stlc->txbuffer, buffer_list) { - /* skip first entry, we checked for that above */ - if (!prev) { - prev = r; - continue; - } - - /* double-check overlaps */ - WARN_ON_ONCE(txbuffer->start >= r->start && - txbuffer->start <= r->end); - WARN_ON_ONCE(txbuffer->end >= r->start && - txbuffer->end <= r->end); - - if (prev->end < txbuffer->start && - txbuffer->end < r->start) { - /* insert at this spot */ - list_add_tail(&txbuffer->buffer_list, &r->buffer_list); - return 0; - } - - prev = r; - } - - /* not found */ - list_add_tail(&txbuffer->buffer_list, &stlc->txbuffer); - - return 0; - -} - -/* caller must hold tx_lock */ -static struct txbuffer *stlc45xx_txbuffer_alloc(struct stlc45xx *stlc, - size_t frame_len) -{ - struct txbuffer *entry = NULL; - size_t len; - int pos; - - stlc45xx_debug(DEBUG_FUNC, "%s()", __func__); - - len = FIRMWARE_TXBUFFER_HEADER + frame_len + FIRMWARE_TXBUFFER_TRAILER; - pos = stlc45xx_txbuffer_find(stlc, len); - - if (pos < 0) - return NULL; - - WARN_ON_ONCE(pos + len > FIRMWARE_TXBUFFER_END); - WARN_ON_ONCE(pos < FIRMWARE_TXBUFFER_START); - - entry = kmalloc(sizeof(*entry), GFP_ATOMIC); - entry->start = pos; - entry->frame_start = pos + FIRMWARE_TXBUFFER_HEADER; - entry->end = entry->start + len - 1; - - stlc45xx_debug(DEBUG_TXBUFFER, "txbuffer: allocated 0x%x-0x%x", - entry->start, entry->end); - - stlc45xx_txbuffer_add(stlc, entry); - - stlc45xx_txbuffer_dump(stlc); - - return entry; -} - -/* caller must hold tx_lock */ -static void stlc45xx_txbuffer_free(struct stlc45xx *stlc, - struct txbuffer *txbuffer) -{ - stlc45xx_debug(DEBUG_FUNC, "%s()", __func__); - - stlc45xx_debug(DEBUG_TXBUFFER, "txbuffer: freed 0x%x-0x%x", - txbuffer->start, txbuffer->end); - - list_del(&txbuffer->buffer_list); - kfree(txbuffer); -} - - -static int stlc45xx_wait_bit(struct stlc45xx *stlc, u16 reg, u32 mask, - u32 expected) -{ - int i; - char buffer[4]; - - for (i = 0; i < 2000; i++) { - stlc45xx_spi_read(stlc, reg, buffer, sizeof(buffer)); - if (((*(u32 *)buffer) & mask) == expected) - return 1; - msleep(1); - } - - return 0; -} - -static int stlc45xx_request_firmware(struct stlc45xx *stlc) -{ - const struct firmware *fw; - int ret; - - /* FIXME: should driver use it's own struct device? */ - ret = request_firmware(&fw, "3826.arm", &stlc->spi->dev); - - if (ret < 0) { - stlc45xx_error("request_firmware() failed: %d", ret); - return ret; - } - - if (fw->size % 4) { - stlc45xx_error("firmware size is not multiple of 32bit: %zu", - fw->size); - return -EILSEQ; /* Illegal byte sequence */; - } - - if (fw->size < 1000) { - stlc45xx_error("firmware is too small: %zu", fw->size); - return -EILSEQ; - } - - stlc->fw = kmemdup(fw->data, fw->size, GFP_KERNEL); - if (!stlc->fw) { - stlc45xx_error("could not allocate memory for firmware"); - return -ENOMEM; - } - - stlc->fw_len = fw->size; - - release_firmware(fw); - - return 0; -} - -static int stlc45xx_upload_firmware(struct stlc45xx *stlc) -{ - struct s_dma_regs dma_regs; - unsigned long fw_len, fw_addr; - long _fw_len; - int ret; - - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - if (!stlc->fw) { - ret = stlc45xx_request_firmware(stlc); - if (ret < 0) - return ret; - } - - /* stop the device */ - stlc45xx_write16(stlc, SPI_ADRS_DEV_CTRL_STAT, - SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_HOST_RESET - | SPI_CTRL_STAT_START_HALTED); - - msleep(TARGET_BOOT_SLEEP); - - stlc45xx_write16(stlc, SPI_ADRS_DEV_CTRL_STAT, - SPI_CTRL_STAT_HOST_OVERRIDE - | SPI_CTRL_STAT_START_HALTED); - - msleep(TARGET_BOOT_SLEEP); - - fw_addr = FIRMWARE_ADDRESS; - fw_len = stlc->fw_len; - - while (fw_len > 0) { - _fw_len = (fw_len > SPI_MAX_PACKET_SIZE) - ? SPI_MAX_PACKET_SIZE : fw_len; - dma_regs.cmd = SPI_DMA_WRITE_CTRL_ENABLE; - dma_regs.len = cpu_to_le16(_fw_len); - dma_regs.addr = cpu_to_le32(fw_addr); - - fw_len -= _fw_len; - fw_addr += _fw_len; - - stlc45xx_write16(stlc, SPI_ADRS_DMA_WRITE_CTRL, dma_regs.cmd); - - if (stlc45xx_wait_bit(stlc, SPI_ADRS_DMA_WRITE_CTRL, - HOST_ALLOWED, HOST_ALLOWED) == 0) { - stlc45xx_error("fw_upload not allowed to DMA write"); - return -EAGAIN; - } - - stlc45xx_write16(stlc, SPI_ADRS_DMA_WRITE_LEN, dma_regs.len); - stlc45xx_write32(stlc, SPI_ADRS_DMA_WRITE_BASE, dma_regs.addr); - - stlc45xx_spi_write(stlc, SPI_ADRS_DMA_DATA, stlc->fw, _fw_len); - - /* FIXME: I think this doesn't work if firmware is large, - * this loop goes to second round. fw->data is not - * increased at all! */ - } - - BUG_ON(fw_len != 0); - - /* enable host interrupts */ - stlc45xx_write32(stlc, SPI_ADRS_HOST_INT_EN, SPI_HOST_INTS_DEFAULT); - - /* boot the device */ - stlc45xx_write16(stlc, SPI_ADRS_DEV_CTRL_STAT, - SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_HOST_RESET - | SPI_CTRL_STAT_RAM_BOOT); - - msleep(TARGET_BOOT_SLEEP); - - stlc45xx_write16(stlc, SPI_ADRS_DEV_CTRL_STAT, - SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_RAM_BOOT); - msleep(TARGET_BOOT_SLEEP); - - return 0; -} - -/* caller must hold tx_lock */ -static void stlc45xx_check_txsent(struct stlc45xx *stlc) -{ - struct txbuffer *entry, *n; - - list_for_each_entry_safe(entry, n, &stlc->tx_sent, tx_list) { - if (time_after(jiffies, entry->lifetime)) { - if (net_ratelimit()) - stlc45xx_warning("frame 0x%x lifetime exceeded", - entry->start); - list_del(&entry->tx_list); - skb_pull(entry->skb, entry->header_len); - ieee80211_tx_status(stlc->hw, entry->skb); - stlc45xx_txbuffer_free(stlc, entry); - } - } -} - -static void stlc45xx_power_off(struct stlc45xx *stlc) -{ - disable_irq(gpio_to_irq(stlc45xx_gpio_irq)); - gpio_set_value(stlc45xx_gpio_power, 0); -} - -static void stlc45xx_power_on(struct stlc45xx *stlc) -{ - gpio_set_value(stlc45xx_gpio_power, 1); - enable_irq(gpio_to_irq(stlc45xx_gpio_irq)); - - /* - * need to wait a while before device can be accessed, the length - * is just a guess - */ - msleep(10); -} - -/* caller must hold tx_lock */ -static void stlc45xx_flush_queues(struct stlc45xx *stlc) -{ - struct txbuffer *entry; - - while (!list_empty(&stlc->tx_sent)) { - entry = list_first_entry(&stlc->tx_sent, - struct txbuffer, tx_list); - list_del(&entry->tx_list); - dev_kfree_skb(entry->skb); - stlc45xx_txbuffer_free(stlc, entry); - } - - WARN_ON(!list_empty(&stlc->tx_sent)); - - while (!list_empty(&stlc->tx_pending)) { - entry = list_first_entry(&stlc->tx_pending, - struct txbuffer, tx_list); - list_del(&entry->tx_list); - dev_kfree_skb(entry->skb); - stlc45xx_txbuffer_free(stlc, entry); - } - - WARN_ON(!list_empty(&stlc->tx_pending)); - WARN_ON(!list_empty(&stlc->txbuffer)); -} - -static void stlc45xx_work_reset(struct work_struct *work) -{ - struct stlc45xx *stlc = container_of(work, struct stlc45xx, - work_reset); - - mutex_lock(&stlc->mutex); - - if (stlc->fw_state != FW_STATE_RESET) - goto out; - - stlc45xx_power_off(stlc); - - mutex_unlock(&stlc->mutex); - - /* wait that all work_structs have finished, we can't hold - * stlc->mutex to avoid deadlock */ - cancel_work_sync(&stlc->work); - - /* FIXME: find out good value to wait for chip power down */ - msleep(100); - - mutex_lock(&stlc->mutex); - - /* FIXME: we should gracefully handle if the state has changed - * after re-acquiring mutex */ - WARN_ON(stlc->fw_state != FW_STATE_RESET); - - spin_lock_bh(&stlc->tx_lock); - stlc45xx_flush_queues(stlc); - spin_unlock_bh(&stlc->tx_lock); - - stlc->fw_state = FW_STATE_RESETTING; - - stlc45xx_power_on(stlc); - stlc45xx_upload_firmware(stlc); - -out: - mutex_unlock(&stlc->mutex); -} - -/* caller must hold mutex */ -static void stlc45xx_reset(struct stlc45xx *stlc) -{ - stlc45xx_warning("resetting firmware"); - stlc->fw_state = FW_STATE_RESET; - ieee80211_stop_queues(stlc->hw); - queue_work(stlc->hw->workqueue, &stlc->work_reset); -} - -static void stlc45xx_work_tx_timeout(struct work_struct *work) -{ - struct stlc45xx *stlc = container_of(work, struct stlc45xx, - work_tx_timeout.work); - - stlc45xx_warning("tx timeout"); - - mutex_lock(&stlc->mutex); - - if (stlc->fw_state != FW_STATE_READY) - goto out; - - stlc45xx_reset(stlc); - -out: - mutex_unlock(&stlc->mutex); -} - -static void stlc45xx_int_ack(struct stlc45xx *stlc, u32 val) -{ - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - stlc45xx_write32(stlc, SPI_ADRS_HOST_INT_ACK, val); -} - -static void stlc45xx_wakeup(struct stlc45xx *stlc) -{ - unsigned long timeout; - u32 ints; - - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - /* wake the chip */ - stlc45xx_write32(stlc, SPI_ADRS_ARM_INTERRUPTS, SPI_TARGET_INT_WAKEUP); - - /* And wait for the READY interrupt */ - timeout = jiffies + HZ; - - ints = stlc45xx_read32(stlc, SPI_ADRS_HOST_INTERRUPTS); - while (!(ints & SPI_HOST_INT_READY)) { - if (time_after(jiffies, timeout)) - goto out; - ints = stlc45xx_read32(stlc, SPI_ADRS_HOST_INTERRUPTS); - } - - stlc45xx_int_ack(stlc, SPI_HOST_INT_READY); - -out: - return; -} - -static void stlc45xx_sleep(struct stlc45xx *stlc) -{ - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - stlc45xx_write32(stlc, SPI_ADRS_ARM_INTERRUPTS, SPI_TARGET_INT_SLEEP); -} - -static void stlc45xx_int_ready(struct stlc45xx *stlc) -{ - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - stlc45xx_write32(stlc, SPI_ADRS_HOST_INT_EN, - SPI_HOST_INT_UPDATE | SPI_HOST_INT_SW_UPDATE); - - switch (stlc->fw_state) { - case FW_STATE_BOOTING: - stlc->fw_state = FW_STATE_READY; - complete(&stlc->fw_comp); - break; - case FW_STATE_RESETTING: - stlc->fw_state = FW_STATE_READY; - - stlc45xx_tx_scan(stlc); - stlc45xx_tx_setup(stlc); - stlc45xx_tx_edcf(stlc); - - ieee80211_wake_queues(stlc->hw); - break; - default: - break; - } -} - -static int stlc45xx_rx_txack(struct stlc45xx *stlc, struct sk_buff *skb) -{ - struct ieee80211_tx_info *info; - struct s_lm_control *control; - struct s_lmo_tx *tx; - struct txbuffer *entry; - int found = 0; - - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - control = (struct s_lm_control *) skb->data; - tx = (struct s_lmo_tx *) (control + 1); - - if (list_empty(&stlc->tx_sent)) { - if (net_ratelimit()) - stlc45xx_warning("no frames waiting for " - "acknowledgement"); - return -1; - } - - list_for_each_entry(entry, &stlc->tx_sent, tx_list) { - if (control->handle == entry->handle) { - found = 1; - break; - } - } - - if (!found) { - if (net_ratelimit()) - stlc45xx_warning("couldn't find frame for tx ack 0x%x", - control->handle); - return -1; - } - - stlc45xx_debug(DEBUG_TX, "TX ACK 0x%x", entry->handle); - - if (entry->status_needed) { - info = IEEE80211_SKB_CB(entry->skb); - - if (!(tx->flags & LM_TX_FAILED)) { - /* frame was acked */ - info->flags |= IEEE80211_TX_STAT_ACK; - info->status.ack_signal = tx->rcpi / 2 - 110; - } - - skb_pull(entry->skb, entry->header_len); - - ieee80211_tx_status(stlc->hw, entry->skb); - } - - list_del(&entry->tx_list); - - stlc45xx_check_txsent(stlc); - if (list_empty(&stlc->tx_sent)) - /* there are no pending frames, we can stop the tx timeout - * timer */ - cancel_delayed_work(&stlc->work_tx_timeout); - - spin_lock_bh(&stlc->tx_lock); - - stlc45xx_txbuffer_free(stlc, entry); - - if (stlc->tx_queue_stopped && - stlc45xx_txbuffer_find(stlc, MAX_FRAME_LEN) != -1) { - stlc45xx_debug(DEBUG_QUEUE, "room in tx buffer, waking queues"); - ieee80211_wake_queues(stlc->hw); - stlc->tx_queue_stopped = 0; - } - - spin_unlock_bh(&stlc->tx_lock); - - return 0; -} - -static int stlc45xx_rx_control(struct stlc45xx *stlc, struct sk_buff *skb) -{ - struct s_lm_control *control; - int ret = 0; - - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - control = (struct s_lm_control *) skb->data; - - switch (control->oid) { - case LM_OID_TX: - ret = stlc45xx_rx_txack(stlc, skb); - break; - case LM_OID_SETUP: - case LM_OID_SCAN: - case LM_OID_TRAP: - case LM_OID_EDCF: - case LM_OID_KEYCACHE: - case LM_OID_PSM: - case LM_OID_STATS: - case LM_OID_LED: - default: - stlc45xx_warning("unhandled rx control oid %d\n", - control->oid); - break; - } - - dev_kfree_skb(skb); - - return ret; -} - -/* copied from mac80211 */ -static void stlc45xx_parse_elems(u8 *start, size_t len, - struct stlc45xx_ie_tim **tim, - size_t *tim_len) -{ - size_t left = len; - u8 *pos = start; - - while (left >= 2) { - u8 id, elen; - - id = *pos++; - elen = *pos++; - left -= 2; - - if (elen > left) - return; - - switch (id) { - case WLAN_EID_TIM: - *tim = (struct stlc45xx_ie_tim *) pos; - *tim_len = elen; - break; - default: - break; - } - - left -= elen; - pos += elen; - } -} - -/* - * mac80211 doesn't have support for asking frames with PS-Poll, so let's - * implement in the driver for now. We have to add support to mac80211 - * later. - */ -static int stlc45xx_check_more_data(struct stlc45xx *stlc, struct sk_buff *skb) -{ - struct s_lm_data_in *data = (struct s_lm_data_in *) skb->data; - struct ieee80211_hdr *hdr; - size_t len; - u16 fc; - - hdr = (void *) skb->data + sizeof(*data); - len = skb->len - sizeof(*data); - - /* minimum frame length is the null frame length 24 bytes */ - if (len < 24) { - stlc45xx_warning("invalid frame length when checking for " - "more data"); - return -EINVAL; - } - - fc = le16_to_cpu(hdr->frame_control); - if (!(fc & IEEE80211_FCTL_FROMDS)) - /* this is not from DS */ - return 0; - - if (compare_ether_addr(hdr->addr1, stlc->mac_addr) != 0) - /* the frame was not for us */ - return 0; - - if (!(fc & IEEE80211_FCTL_MOREDATA)) { - /* AP has no more frames buffered for us */ - stlc45xx_debug(DEBUG_PSM, "all buffered frames retrieved"); - stlc->pspolling = false; - return 0; - } - - /* MOREDATA bit is set, let's ask for a new frame from the AP */ - stlc45xx_tx_pspoll(stlc, stlc->psm); - - return 0; -} - -/* - * mac80211 cannot read TIM from beacons, so let's add a hack to the - * driver. We have to add support to mac80211 later. - */ -static int stlc45xx_rx_data_beacon(struct stlc45xx *stlc, struct sk_buff *skb) -{ - struct s_lm_data_in *data = (struct s_lm_data_in *) skb->data; - size_t len = skb->len, tim_len = 0, baselen, pvbmap_len; - struct ieee80211_mgmt *mgmt; - struct stlc45xx_ie_tim *tim = NULL; - int bmap_offset, index, aid_bit; - - mgmt = (void *) skb->data + sizeof(*data); - - baselen = (u8 *) mgmt->u.beacon.variable - (u8 *) mgmt; - if (baselen > len) { - stlc45xx_warning("invalid baselen in beacon"); - return -EINVAL; - } - - stlc45xx_parse_elems(mgmt->u.beacon.variable, len - baselen, &tim, - &tim_len); - - if (!tim) { - stlc45xx_warning("didn't find tim from a beacon"); - return -EINVAL; - } - - bmap_offset = tim->bmap_control & 0xfe; - index = stlc->aid / 8 - bmap_offset; - - pvbmap_len = tim_len - 3; - if (index > pvbmap_len) - return -EINVAL; - - aid_bit = !!(tim->pvbmap[index] & (1 << stlc->aid % 8)); - - stlc45xx_debug(DEBUG_PSM, "fc 0x%x duration %d seq %d dtim %u " - "bmap_control 0x%x aid_bit %d", - mgmt->frame_control, mgmt->duration, mgmt->seq_ctrl >> 4, - tim->dtim_count, tim->bmap_control, aid_bit); - - if (!aid_bit) - return 0; - - stlc->pspolling = true; - stlc45xx_tx_pspoll(stlc, stlc->psm); - - return 0; -} - -static int stlc45xx_rx_data(struct stlc45xx *stlc, struct sk_buff *skb) -{ - struct ieee80211_rx_status status; - struct s_lm_data_in *data = (struct s_lm_data_in *) skb->data; - int align = 0; - u8 *p, align_len; - u16 len; - - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - if (stlc->psm) { - if (data->flags & LM_IN_BEACON) - stlc45xx_rx_data_beacon(stlc, skb); - else if (stlc->pspolling && (data->flags & LM_IN_DATA)) - stlc45xx_check_more_data(stlc, skb); - } - - memset(&status, 0, sizeof(status)); - - status.freq = data->frequency; - status.signal = data->rcpi / 2 - 110; - - /* let's assume that maximum rcpi value is 140 (= 35 dBm) */ - status.qual = data->rcpi * 100 / 140; - - status.band = IEEE80211_BAND_2GHZ; - - /* - * FIXME: this gives warning from __ieee80211_rx() - * - * status.rate_idx = data->rate; - */ - - len = data->length; - - if (data->flags & LM_FLAG_ALIGN) - align = 1; - - skb_pull(skb, sizeof(*data)); - - if (align) { - p = skb->data; - align_len = *p; - skb_pull(skb, align_len); - } - - skb_trim(skb, len); - - stlc45xx_debug(DEBUG_RX, "rx data 0x%p %d B", skb->data, skb->len); - stlc45xx_dump(DEBUG_RX_CONTENT, skb->data, skb->len); - - memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status)); - ieee80211_rx(stlc->hw, skb); - - return 0; -} - - - -static int stlc45xx_rx(struct stlc45xx *stlc) -{ - struct s_lm_control *control; - struct sk_buff *skb; - int ret; - u16 len; - - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - stlc45xx_wakeup(stlc); - - /* dummy read to flush SPI DMA controller bug */ - stlc45xx_read16(stlc, SPI_ADRS_GEN_PURP_1); - - len = stlc45xx_read16(stlc, SPI_ADRS_DMA_DATA); - - if (len == 0) { - stlc45xx_warning("rx request of zero bytes"); - return 0; - } - - skb = dev_alloc_skb(len); - if (!skb) { - stlc45xx_warning("could not alloc skb"); - return 0; - } - - stlc45xx_spi_read(stlc, SPI_ADRS_DMA_DATA, skb_put(skb, len), len); - - stlc45xx_sleep(stlc); - - stlc45xx_debug(DEBUG_RX, "rx frame 0x%p %d B", skb->data, skb->len); - stlc45xx_dump(DEBUG_RX_CONTENT, skb->data, skb->len); - - control = (struct s_lm_control *) skb->data; - - if (control->flags & LM_FLAG_CONTROL) - ret = stlc45xx_rx_control(stlc, skb); - else - ret = stlc45xx_rx_data(stlc, skb); - - return ret; -} - - -static irqreturn_t stlc45xx_interrupt(int irq, void *config) -{ - struct spi_device *spi = config; - struct stlc45xx *stlc = dev_get_drvdata(&spi->dev); - - stlc45xx_debug(DEBUG_IRQ, "IRQ"); - - queue_work(stlc->hw->workqueue, &stlc->work); - - return IRQ_HANDLED; -} - -static int stlc45xx_tx_frame(struct stlc45xx *stlc, u32 address, - void *buf, size_t len) -{ - struct s_dma_regs dma_regs; - unsigned long timeout; - int ret = 0; - u32 ints; - - stlc->tx_frames++; - - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - stlc45xx_debug(DEBUG_TX, "tx frame 0x%p %zu B", buf, len); - stlc45xx_dump(DEBUG_TX_CONTENT, buf, len); - - stlc45xx_wakeup(stlc); - - dma_regs.cmd = SPI_DMA_WRITE_CTRL_ENABLE; - dma_regs.len = cpu_to_le16(len); - dma_regs.addr = cpu_to_le32(address); - - stlc45xx_spi_write(stlc, SPI_ADRS_DMA_WRITE_CTRL, &dma_regs, - sizeof(dma_regs)); - - stlc45xx_spi_write(stlc, SPI_ADRS_DMA_DATA, buf, len); - - timeout = jiffies + 2 * HZ; - ints = stlc45xx_read32(stlc, SPI_ADRS_HOST_INTERRUPTS); - while (!(ints & SPI_HOST_INT_WR_READY)) { - if (time_after(jiffies, timeout)) { - stlc45xx_warning("WR_READY timeout"); - ret = -1; - goto out; - } - ints = stlc45xx_read32(stlc, SPI_ADRS_HOST_INTERRUPTS); - } - - stlc45xx_int_ack(stlc, SPI_HOST_INT_WR_READY); - - stlc45xx_sleep(stlc); - -out: - return ret; -} - -static int stlc45xx_wq_tx(struct stlc45xx *stlc) -{ - struct txbuffer *entry; - int ret = 0; - - spin_lock_bh(&stlc->tx_lock); - - while (!list_empty(&stlc->tx_pending)) { - entry = list_entry(stlc->tx_pending.next, - struct txbuffer, tx_list); - - list_del_init(&entry->tx_list); - - spin_unlock_bh(&stlc->tx_lock); - - ret = stlc45xx_tx_frame(stlc, entry->frame_start, - entry->skb->data, entry->skb->len); - - spin_lock_bh(&stlc->tx_lock); - - if (ret < 0) { - /* frame transfer to firmware buffer failed */ - /* FIXME: report this to mac80211 */ - dev_kfree_skb(entry->skb); - stlc45xx_txbuffer_free(stlc, entry); - goto out; - } - - list_add(&entry->tx_list, &stlc->tx_sent); - queue_delayed_work(stlc->hw->workqueue, - &stlc->work_tx_timeout, - msecs_to_jiffies(TX_TIMEOUT)); - } - -out: - spin_unlock_bh(&stlc->tx_lock); - return ret; -} - -static void stlc45xx_work(struct work_struct *work) -{ - struct stlc45xx *stlc = container_of(work, struct stlc45xx, work); - u32 ints; - int ret; - - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - mutex_lock(&stlc->mutex); - - if (stlc->fw_state == FW_STATE_OFF && - stlc->fw_state == FW_STATE_RESET) - goto out; - - ints = stlc45xx_read32(stlc, SPI_ADRS_HOST_INTERRUPTS); - stlc45xx_debug(DEBUG_BH, "begin host_ints 0x%08x", ints); - - if (ints & SPI_HOST_INT_READY) { - stlc45xx_int_ready(stlc); - stlc45xx_int_ack(stlc, SPI_HOST_INT_READY); - } - - if (stlc->fw_state != FW_STATE_READY) - goto out; - - if (ints & SPI_HOST_INT_UPDATE) { - stlc45xx_int_ack(stlc, SPI_HOST_INT_UPDATE); - ret = stlc45xx_rx(stlc); - if (ret < 0) { - stlc45xx_reset(stlc); - goto out; - } - } - if (ints & SPI_HOST_INT_SW_UPDATE) { - stlc45xx_int_ack(stlc, SPI_HOST_INT_SW_UPDATE); - ret = stlc45xx_rx(stlc); - if (ret < 0) { - stlc45xx_reset(stlc); - goto out; - } - } - - ret = stlc45xx_wq_tx(stlc); - if (ret < 0) { - stlc45xx_reset(stlc); - goto out; - } - - ints = stlc45xx_read32(stlc, SPI_ADRS_HOST_INTERRUPTS); - stlc45xx_debug(DEBUG_BH, "end host_ints 0x%08x", ints); - -out: - mutex_unlock(&stlc->mutex); -} - -static void stlc45xx_tx_edcf(struct stlc45xx *stlc) -{ - struct s_lm_control *control; - struct s_lmo_edcf *edcf; - size_t len, edcf_len; - - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - edcf_len = sizeof(*edcf); - len = sizeof(*control) + edcf_len; - control = kzalloc(len, GFP_KERNEL); - edcf = (struct s_lmo_edcf *) (control + 1); - - control->flags = LM_FLAG_CONTROL | LM_CTRL_OPSET; - control->length = edcf_len; - control->oid = LM_OID_EDCF; - - edcf->slottime = 0x14; - edcf->sifs = 10; - edcf->eofpad = 6; - edcf->maxburst = 1500; - - edcf->queues[0].aifs = 2; - edcf->queues[0].pad0 = 1; - edcf->queues[0].cwmin = 3; - edcf->queues[0].cwmax = 7; - edcf->queues[0].txop = 47; - edcf->queues[1].aifs = 2; - edcf->queues[1].pad0 = 0; - edcf->queues[1].cwmin = 7; - edcf->queues[1].cwmax = 15; - edcf->queues[1].txop = 94; - edcf->queues[2].aifs = 3; - edcf->queues[2].pad0 = 0; - edcf->queues[2].cwmin = 15; - edcf->queues[2].cwmax = 1023; - edcf->queues[2].txop = 0; - edcf->queues[3].aifs = 7; - edcf->queues[3].pad0 = 0; - edcf->queues[3].cwmin = 15; - edcf->queues[3].cwmax = 1023; - edcf->queues[3].txop = 0; - edcf->queues[4].aifs = 13; - edcf->queues[4].pad0 = 99; - edcf->queues[4].cwmin = 3437; - edcf->queues[4].cwmax = 512; - edcf->queues[4].txop = 12; - edcf->queues[5].aifs = 142; - edcf->queues[5].pad0 = 109; - edcf->queues[5].cwmin = 8756; - edcf->queues[5].cwmax = 6; - edcf->queues[5].txop = 0; - edcf->queues[6].aifs = 4; - edcf->queues[6].pad0 = 0; - edcf->queues[6].cwmin = 0; - edcf->queues[6].cwmax = 58705; - edcf->queues[6].txop = 25716; - edcf->queues[7].aifs = 0; - edcf->queues[7].pad0 = 0; - edcf->queues[7].cwmin = 0; - edcf->queues[7].cwmax = 0; - edcf->queues[7].txop = 0; - - stlc45xx_tx_frame(stlc, FIRMWARE_CONFIG_START, control, len); - - kfree(control); -} - -static void stlc45xx_tx_setup(struct stlc45xx *stlc) -{ - struct s_lm_control *control; - struct s_lmo_setup *setup; - size_t len, setup_len; - - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - setup_len = sizeof(*setup); - len = sizeof(*control) + setup_len; - control = kzalloc(len, GFP_KERNEL); - setup = (struct s_lmo_setup *) (control + 1); - - control->flags = LM_FLAG_CONTROL | LM_CTRL_OPSET; - control->length = setup_len; - control->oid = LM_OID_SETUP; - - setup->flags = LM_SETUP_INFRA; - setup->antenna = 2; - setup->rx_align = 0; - setup->rx_buffer = FIRMWARE_RXBUFFER_START; - setup->rx_mtu = FIRMWARE_MTU; - setup->frontend = 5; - setup->timeout = 0; - setup->truncate = 48896; - setup->bratemask = 0xffffffff; - setup->ref_clock = 644245094; - setup->lpf_bandwidth = 65535; - setup->osc_start_delay = 65535; - - memcpy(setup->macaddr, stlc->mac_addr, ETH_ALEN); - memcpy(setup->bssid, stlc->bssid, ETH_ALEN); - - stlc45xx_tx_frame(stlc, FIRMWARE_CONFIG_START, control, len); - - kfree(control); -} - -static void stlc45xx_tx_scan(struct stlc45xx *stlc) -{ - struct s_lm_control *control; - struct s_lmo_scan *scan; - size_t len, scan_len; - - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - scan_len = sizeof(*scan); - len = sizeof(*control) + scan_len; - control = kzalloc(len, GFP_KERNEL); - scan = (struct s_lmo_scan *) (control + 1); - - control->flags = LM_FLAG_CONTROL | LM_CTRL_OPSET; - control->length = scan_len; - control->oid = LM_OID_SCAN; - - scan->flags = LM_SCAN_EXIT; - scan->bratemask = 0x15f; - scan->aloft[0] = 3; - scan->aloft[1] = 3; - scan->aloft[2] = 1; - scan->aloft[3] = 0; - scan->aloft[4] = 0; - scan->aloft[5] = 0; - scan->aloft[6] = 0; - scan->aloft[7] = 0; - - memcpy(&scan->rssical, &stlc->cal_rssi[(stlc->channel - 1) * - RSSI_CAL_LEN], - RSSI_CAL_LEN); - memcpy(&scan->channel, &stlc->cal_channels[(stlc->channel - 1) * - CHANNEL_CAL_LEN], - CHANNEL_CAL_LEN); - - stlc45xx_tx_frame(stlc, FIRMWARE_CONFIG_START, control, len); - - kfree(control); -} - -/* - * caller must hold mutex - */ -static int stlc45xx_tx_pspoll(struct stlc45xx *stlc, bool powersave) -{ - struct ieee80211_hdr *pspoll; - int payload_len, padding, i; - struct s_lm_data_out *data; - struct txbuffer *entry; - struct sk_buff *skb; - char *payload; - u16 fc; - - skb = dev_alloc_skb(stlc->hw->extra_tx_headroom + 16); - if (!skb) { - stlc45xx_warning("failed to allocate pspoll frame"); - return -ENOMEM; - } - skb_reserve(skb, stlc->hw->extra_tx_headroom); - - pspoll = (struct ieee80211_hdr *) skb_put(skb, 16); - memset(pspoll, 0, 16); - fc = IEEE80211_FTYPE_CTL | IEEE80211_STYPE_PSPOLL; - if (powersave) - fc |= IEEE80211_FCTL_PM; - pspoll->frame_control = cpu_to_le16(fc); - pspoll->duration_id = cpu_to_le16(stlc->aid); - - /* aid in PS-Poll has its two MSBs each set to 1 */ - pspoll->duration_id |= cpu_to_le16(1 << 15) | cpu_to_le16(1 << 14); - - memcpy(pspoll->addr1, stlc->bssid, ETH_ALEN); - memcpy(pspoll->addr2, stlc->mac_addr, ETH_ALEN); - - stlc45xx_debug(DEBUG_PSM, "sending PS-Poll frame to %pM (powersave %d, " - "fc 0x%x, aid %d)", pspoll->addr1, - powersave, fc, stlc->aid); - - spin_lock_bh(&stlc->tx_lock); - - entry = stlc45xx_txbuffer_alloc(stlc, skb->len); - - spin_unlock_bh(&stlc->tx_lock); - - if (!entry) { - /* - * The queue should be stopped before the firmware buffer - * is full, so firmware buffer should always have enough - * space. - * - * But I'm too lazy and omit it for now. - */ - if (net_ratelimit()) - stlc45xx_warning("firmware tx buffer full is full " - "for null frame"); - return -ENOSPC; - } - - payload = skb->data; - payload_len = skb->len; - padding = (int) (skb->data - sizeof(*data)) & 3; - entry->header_len = sizeof(*data) + padding; - - entry->skb = skb; - entry->status_needed = false; - entry->handle = (u32) skb; - entry->lifetime = jiffies + msecs_to_jiffies(TX_FRAME_LIFETIME); - - stlc45xx_debug(DEBUG_TX, "tx data 0x%x (0x%p payload %d B " - "padding %d header_len %d)", - entry->handle, payload, payload_len, padding, - entry->header_len); - stlc45xx_dump(DEBUG_TX_CONTENT, payload, payload_len); - - data = (struct s_lm_data_out *) skb_push(skb, entry->header_len); - - memset(data, 0, entry->header_len); - - if (padding) - data->flags = LM_FLAG_ALIGN; - - data->flags = LM_OUT_BURST; - data->length = payload_len; - data->handle = entry->handle; - data->aid = 1; - data->rts_retries = 7; - data->retries = 7; - data->aloft_ctrl = 0; - data->crypt_offset = 58; - data->keytype = 0; - data->keylen = 0; - data->queue = LM_QUEUE_DATA3; - data->backlog = 32; - data->antenna = 2; - data->cts = 3; - data->power = 127; - - for (i = 0; i < 8; i++) - data->aloft[i] = 0; - - /* - * check if there's enough space in tx buffer - * - * FIXME: ignored for now - */ - - stlc45xx_tx_frame(stlc, entry->start, skb->data, skb->len); - - list_add(&entry->tx_list, &stlc->tx_sent); - - return 0; -} - -/* - * caller must hold mutex - * - * shamelessly stolen from mac80211/ieee80211_send_nullfunc - */ -static int stlc45xx_tx_nullfunc(struct stlc45xx *stlc, bool powersave) -{ - struct ieee80211_hdr *nullfunc; - int payload_len, padding, i; - struct s_lm_data_out *data; - struct txbuffer *entry; - struct sk_buff *skb; - char *payload; - u16 fc; - - skb = dev_alloc_skb(stlc->hw->extra_tx_headroom + 24); - if (!skb) { - stlc45xx_warning("failed to allocate buffer for null frame\n"); - return -ENOMEM; - } - skb_reserve(skb, stlc->hw->extra_tx_headroom); - - nullfunc = (struct ieee80211_hdr *) skb_put(skb, 24); - memset(nullfunc, 0, 24); - fc = IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC | - IEEE80211_FCTL_TODS; - - if (powersave) - fc |= IEEE80211_FCTL_PM; - - nullfunc->frame_control = cpu_to_le16(fc); - memcpy(nullfunc->addr1, stlc->bssid, ETH_ALEN); - memcpy(nullfunc->addr2, stlc->mac_addr, ETH_ALEN); - memcpy(nullfunc->addr3, stlc->bssid, ETH_ALEN); - - stlc45xx_debug(DEBUG_PSM, "sending Null frame to %pM (powersave %d, " - "fc 0x%x)", nullfunc->addr1, powersave, fc); - - spin_lock_bh(&stlc->tx_lock); - - entry = stlc45xx_txbuffer_alloc(stlc, skb->len); - - spin_unlock_bh(&stlc->tx_lock); - - if (!entry) { - /* - * The queue should be stopped before the firmware buffer - * is full, so firmware buffer should always have enough - * space. - * - * But I'm too lazy and omit it for now. - */ - if (net_ratelimit()) - stlc45xx_warning("firmware tx buffer full is full " - "for null frame"); - return -ENOSPC; - } - - payload = skb->data; - payload_len = skb->len; - padding = (int) (skb->data - sizeof(*data)) & 3; - entry->header_len = sizeof(*data) + padding; - - entry->skb = skb; - entry->status_needed = false; - entry->handle = (u32) skb; - entry->lifetime = jiffies + msecs_to_jiffies(TX_FRAME_LIFETIME); - - stlc45xx_debug(DEBUG_TX, "tx data 0x%x (0x%p payload %d B " - "padding %d header_len %d)", - entry->handle, payload, payload_len, padding, - entry->header_len); - stlc45xx_dump(DEBUG_TX_CONTENT, payload, payload_len); - - data = (struct s_lm_data_out *) skb_push(skb, entry->header_len); - - memset(data, 0, entry->header_len); - - if (padding) - data->flags = LM_FLAG_ALIGN; - - data->flags = LM_OUT_BURST; - data->length = payload_len; - data->handle = entry->handle; - data->aid = 1; - data->rts_retries = 7; - data->retries = 7; - data->aloft_ctrl = 0; - data->crypt_offset = 58; - data->keytype = 0; - data->keylen = 0; - data->queue = LM_QUEUE_DATA3; - data->backlog = 32; - data->antenna = 2; - data->cts = 3; - data->power = 127; - - for (i = 0; i < 8; i++) - data->aloft[i] = 0; - - /* - * check if there's enough space in tx buffer - * - * FIXME: ignored for now - */ - - stlc45xx_tx_frame(stlc, entry->start, skb->data, skb->len); - - list_add(&entry->tx_list, &stlc->tx_sent); - - return 0; -} - -/* caller must hold mutex */ -static void stlc45xx_tx_psm(struct stlc45xx *stlc, bool enable) -{ - struct s_lm_control *control; - struct s_lmo_psm *psm; - size_t len, psm_len; - - WARN_ON(!stlc->associated); - WARN_ON(stlc->aid < 1); - WARN_ON(stlc->aid > 2007); - - psm_len = sizeof(*psm); - len = sizeof(*control) + psm_len; - control = kzalloc(len, GFP_KERNEL); - psm = (struct s_lmo_psm *) (control + 1); - - control->flags = LM_FLAG_CONTROL | LM_CTRL_OPSET; - control->length = psm_len; - control->oid = LM_OID_PSM; - - if (enable) - psm->flags |= LM_PSM; - - psm->aid = stlc->aid; - - psm->beacon_rcpi_skip_max = 60; - - psm->intervals[0].interval = 1; - psm->intervals[0].periods = 1; - psm->intervals[1].interval = 1; - psm->intervals[1].periods = 1; - psm->intervals[2].interval = 1; - psm->intervals[2].periods = 1; - psm->intervals[3].interval = 1; - psm->intervals[3].periods = 1; - - psm->nr = 0; - psm->exclude[0] = 0; - - stlc45xx_debug(DEBUG_PSM, "sending LM_OID_PSM (aid %d, interval %d)", - psm->aid, psm->intervals[0].interval); - - stlc45xx_tx_frame(stlc, FIRMWARE_CONFIG_START, control, len); - - kfree(control); -} - -static int stlc45xx_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb) -{ - struct stlc45xx *stlc = hw->priv; - struct ieee80211_tx_info *info; - struct ieee80211_rate *rate; - int payload_len, padding, i; - struct s_lm_data_out *data; - struct txbuffer *entry; - char *payload; - - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - spin_lock_bh(&stlc->tx_lock); - - entry = stlc45xx_txbuffer_alloc(stlc, skb->len); - if (!entry) { - /* the queue should be stopped before the firmware buffer - * is full, so firmware buffer should always have enough - * space */ - if (net_ratelimit()) - stlc45xx_warning("firmware buffer full"); - spin_unlock_bh(&stlc->tx_lock); - return NETDEV_TX_BUSY; - } - - info = IEEE80211_SKB_CB(skb); - - payload = skb->data; - payload_len = skb->len; - padding = (int) (skb->data - sizeof(*data)) & 3; - entry->header_len = sizeof(*data) + padding; - - entry->skb = skb; - entry->status_needed = true; - entry->handle = (u32) skb; - entry->lifetime = jiffies + msecs_to_jiffies(TX_FRAME_LIFETIME); - - stlc45xx_debug(DEBUG_TX, "tx data 0x%x (0x%p payload %d B " - "padding %d header_len %d)", - entry->handle, payload, payload_len, padding, - entry->header_len); - stlc45xx_dump(DEBUG_TX_CONTENT, payload, payload_len); - - data = (struct s_lm_data_out *) skb_push(skb, entry->header_len); - - memset(data, 0, entry->header_len); - - if (padding) - data->flags = LM_FLAG_ALIGN; - - data->flags = LM_OUT_BURST; - data->length = payload_len; - data->handle = entry->handle; - data->aid = 1; - data->rts_retries = 7; - data->retries = 7; - data->aloft_ctrl = 0; - data->crypt_offset = 58; - data->keytype = 0; - data->keylen = 0; - data->queue = 2; - data->backlog = 32; - data->antenna = 2; - data->cts = 3; - data->power = 127; - - for (i = 0; i < 8; i++) { - rate = ieee80211_get_tx_rate(stlc->hw, info); - data->aloft[i] = rate->hw_value; - } - - list_add_tail(&entry->tx_list, &stlc->tx_pending); - - /* check if there's enough space in tx buffer */ - if (stlc45xx_txbuffer_find(stlc, MAX_FRAME_LEN) == -1) { - stlc45xx_debug(DEBUG_QUEUE, "tx buffer full, stopping queues"); - stlc->tx_queue_stopped = 1; - ieee80211_stop_queues(stlc->hw); - } - - queue_work(stlc->hw->workqueue, &stlc->work); - - spin_unlock_bh(&stlc->tx_lock); - - return NETDEV_TX_OK; -} - -static int stlc45xx_op_start(struct ieee80211_hw *hw) -{ - struct stlc45xx *stlc = hw->priv; - unsigned long timeout; - int ret = 0; - - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - mutex_lock(&stlc->mutex); - - stlc->fw_state = FW_STATE_BOOTING; - stlc->channel = 1; - - stlc45xx_power_on(stlc); - - ret = stlc45xx_upload_firmware(stlc); - if (ret < 0) { - stlc45xx_power_off(stlc); - goto out_unlock; - } - - stlc->tx_queue_stopped = 0; - - mutex_unlock(&stlc->mutex); - - timeout = msecs_to_jiffies(2000); - timeout = wait_for_completion_interruptible_timeout(&stlc->fw_comp, - timeout); - if (!timeout) { - stlc45xx_error("firmware boot failed"); - stlc45xx_power_off(stlc); - ret = -1; - goto out; - } - - stlc45xx_debug(DEBUG_BOOT, "firmware booted"); - - /* FIXME: should we take mutex just after wait_for_completion()? */ - mutex_lock(&stlc->mutex); - - WARN_ON(stlc->fw_state != FW_STATE_READY); - -out_unlock: - mutex_unlock(&stlc->mutex); - -out: - return ret; -} - -static void stlc45xx_op_stop(struct ieee80211_hw *hw) -{ - struct stlc45xx *stlc = hw->priv; - - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - mutex_lock(&stlc->mutex); - - WARN_ON(stlc->fw_state != FW_STATE_READY); - - stlc45xx_power_off(stlc); - - /* FIXME: make sure that all work_structs have completed */ - - spin_lock_bh(&stlc->tx_lock); - stlc45xx_flush_queues(stlc); - spin_unlock_bh(&stlc->tx_lock); - - stlc->fw_state = FW_STATE_OFF; - - mutex_unlock(&stlc->mutex); -} - -static int stlc45xx_op_add_interface(struct ieee80211_hw *hw, - struct ieee80211_if_init_conf *conf) -{ - struct stlc45xx *stlc = hw->priv; - - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - switch (conf->type) { - case NL80211_IFTYPE_STATION: - break; - default: - return -EOPNOTSUPP; - } - - memcpy(stlc->mac_addr, conf->mac_addr, ETH_ALEN); - - return 0; -} - -static void stlc45xx_op_remove_interface(struct ieee80211_hw *hw, - struct ieee80211_if_init_conf *conf) -{ - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); -} - -static int stlc45xx_op_config(struct ieee80211_hw *hw, u32 changed) -{ - struct stlc45xx *stlc = hw->priv; - - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - mutex_lock(&stlc->mutex); - - stlc->channel = hw->conf.channel->hw_value; - stlc45xx_tx_scan(stlc); - stlc45xx_tx_setup(stlc); - stlc45xx_tx_edcf(stlc); - - if ((hw->conf.flags & IEEE80211_CONF_PS) != stlc->psm) { - stlc->psm = hw->conf.flags & IEEE80211_CONF_PS; - if (stlc->associated) { - stlc45xx_tx_psm(stlc, stlc->psm); - stlc45xx_tx_nullfunc(stlc, stlc->psm); - } - } - - mutex_unlock(&stlc->mutex); - - return 0; -} - -static void stlc45xx_op_configure_filter(struct ieee80211_hw *hw, - unsigned int changed_flags, - unsigned int *total_flags, - int mc_count, - struct dev_addr_list *mc_list) -{ - *total_flags = 0; -} - -static void stlc45xx_op_bss_info_changed(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_bss_conf *info, - u32 changed) -{ - struct stlc45xx *stlc = hw->priv; - - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - mutex_lock(&stlc->mutex); - - memcpy(stlc->bssid, info->bssid, ETH_ALEN); - stlc45xx_tx_setup(stlc); - - mutex_unlock(&stlc->mutex); - - if (changed & BSS_CHANGED_ASSOC) { - stlc->associated = info->assoc; - if (info->assoc) - stlc->aid = info->aid; - else - stlc->aid = -1; - - if (stlc->psm) { - stlc45xx_tx_psm(stlc, stlc->psm); - stlc45xx_tx_nullfunc(stlc, stlc->psm); - } - } -} - - -/* can't be const, mac80211 writes to this */ -static struct ieee80211_rate stlc45xx_rates[] = { - { .bitrate = 10, .hw_value = 0, .hw_value_short = 0, }, - { .bitrate = 20, .hw_value = 1, .hw_value_short = 1, }, - { .bitrate = 55, .hw_value = 2, .hw_value_short = 2, }, - { .bitrate = 110, .hw_value = 3, .hw_value_short = 3, }, - { .bitrate = 60, .hw_value = 4, .hw_value_short = 4, }, - { .bitrate = 90, .hw_value = 5, .hw_value_short = 5, }, - { .bitrate = 120, .hw_value = 6, .hw_value_short = 6, }, - { .bitrate = 180, .hw_value = 7, .hw_value_short = 7, }, - { .bitrate = 240, .hw_value = 8, .hw_value_short = 8, }, - { .bitrate = 360, .hw_value = 9, .hw_value_short = 9, }, - { .bitrate = 480, .hw_value = 10, .hw_value_short = 10, }, - { .bitrate = 540, .hw_value = 11, .hw_value_short = 11, }, -}; - -/* can't be const, mac80211 writes to this */ -static struct ieee80211_channel stlc45xx_channels[] = { - { .hw_value = 1, .center_freq = 2412}, - { .hw_value = 2, .center_freq = 2417}, - { .hw_value = 3, .center_freq = 2422}, - { .hw_value = 4, .center_freq = 2427}, - { .hw_value = 5, .center_freq = 2432}, - { .hw_value = 6, .center_freq = 2437}, - { .hw_value = 7, .center_freq = 2442}, - { .hw_value = 8, .center_freq = 2447}, - { .hw_value = 9, .center_freq = 2452}, - { .hw_value = 10, .center_freq = 2457}, - { .hw_value = 11, .center_freq = 2462}, - { .hw_value = 12, .center_freq = 2467}, - { .hw_value = 13, .center_freq = 2472}, -}; - -/* can't be const, mac80211 writes to this */ -static struct ieee80211_supported_band stlc45xx_band_2ghz = { - .channels = stlc45xx_channels, - .n_channels = ARRAY_SIZE(stlc45xx_channels), - .bitrates = stlc45xx_rates, - .n_bitrates = ARRAY_SIZE(stlc45xx_rates), -}; - -static const struct ieee80211_ops stlc45xx_ops = { - .start = stlc45xx_op_start, - .stop = stlc45xx_op_stop, - .add_interface = stlc45xx_op_add_interface, - .remove_interface = stlc45xx_op_remove_interface, - .config = stlc45xx_op_config, - .configure_filter = stlc45xx_op_configure_filter, - .tx = stlc45xx_op_tx, - .bss_info_changed = stlc45xx_op_bss_info_changed, -}; - -static int stlc45xx_register_mac80211(struct stlc45xx *stlc) -{ - /* FIXME: SET_IEEE80211_PERM_ADDR() requires default_mac_addr - to be non-const for some strange reason */ - static u8 default_mac_addr[ETH_ALEN] = { - 0x00, 0x02, 0xee, 0xc0, 0xff, 0xee - }; - int ret; - - SET_IEEE80211_PERM_ADDR(stlc->hw, default_mac_addr); - - ret = ieee80211_register_hw(stlc->hw); - if (ret) { - stlc45xx_error("unable to register mac80211 hw: %d", ret); - return ret; - } - - return 0; -} - -static void stlc45xx_device_release(struct device *dev) -{ - -} - -static struct platform_device stlc45xx_device = { - .name = "stlc45xx", - .id = -1, - - /* device model insists to have a release function */ - .dev = { - .release = stlc45xx_device_release, - }, -}; - -static int __devinit stlc45xx_probe(struct spi_device *spi) -{ - struct stlc45xx *stlc; - struct ieee80211_hw *hw; - int ret; - - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - /* mac80211 alloc */ - hw = ieee80211_alloc_hw(sizeof(*stlc), &stlc45xx_ops); - if (!hw) { - stlc45xx_error("could not alloc ieee80211_hw"); - ret = -ENOMEM; - goto out; - } - - /* mac80211 clears hw->priv */ - stlc = hw->priv; - - stlc->hw = hw; - dev_set_drvdata(&spi->dev, stlc); - stlc->spi = spi; - - spi->bits_per_word = 16; - spi->max_speed_hz = 24000000; - - ret = spi_setup(spi); - if (ret < 0) - stlc45xx_error("spi_setup failed"); - - ret = gpio_request(stlc45xx_gpio_power, "stlc45xx power"); - if (ret < 0) { - stlc45xx_error("power GPIO request failed: %d", ret); - return ret; - } - - ret = gpio_request(stlc45xx_gpio_irq, "stlc45xx irq"); - if (ret < 0) { - stlc45xx_error("irq GPIO request failed: %d", ret); - goto out; - } - - gpio_direction_output(stlc45xx_gpio_power, 0); - gpio_direction_input(stlc45xx_gpio_irq); - - ret = request_irq(gpio_to_irq(stlc45xx_gpio_irq), - stlc45xx_interrupt, IRQF_DISABLED, "stlc45xx", - stlc->spi); - if (ret < 0) - /* FIXME: handle the error */ - stlc45xx_error("request_irq() failed"); - - set_irq_type(gpio_to_irq(stlc45xx_gpio_irq), - IRQ_TYPE_EDGE_RISING); - - disable_irq(gpio_to_irq(stlc45xx_gpio_irq)); - - ret = platform_device_register(&stlc45xx_device); - if (ret) { - stlc45xx_error("Couldn't register wlan_omap device."); - return ret; - } - dev_set_drvdata(&stlc45xx_device.dev, stlc); - - INIT_WORK(&stlc->work, stlc45xx_work); - INIT_WORK(&stlc->work_reset, stlc45xx_work_reset); - INIT_DELAYED_WORK(&stlc->work_tx_timeout, stlc45xx_work_tx_timeout); - mutex_init(&stlc->mutex); - init_completion(&stlc->fw_comp); - spin_lock_init(&stlc->tx_lock); - INIT_LIST_HEAD(&stlc->txbuffer); - INIT_LIST_HEAD(&stlc->tx_pending); - INIT_LIST_HEAD(&stlc->tx_sent); - - hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | - IEEE80211_HW_SIGNAL_DBM | - IEEE80211_HW_NOISE_DBM; - /* four bytes for padding */ - hw->extra_tx_headroom = sizeof(struct s_lm_data_out) + 4; - - /* unit us */ - hw->channel_change_time = 1000; - - hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); - hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &stlc45xx_band_2ghz; - - SET_IEEE80211_DEV(hw, &spi->dev); - - BUILD_BUG_ON(sizeof(default_cal_rssi) != RSSI_CAL_ARRAY_LEN); - BUILD_BUG_ON(sizeof(default_cal_channels) != CHANNEL_CAL_ARRAY_LEN); - - stlc->cal_rssi = kmemdup(default_cal_rssi, RSSI_CAL_ARRAY_LEN, - GFP_KERNEL); - stlc->cal_channels = kmemdup(default_cal_channels, - CHANNEL_CAL_ARRAY_LEN, - GFP_KERNEL); - - ret = device_create_file(&stlc45xx_device.dev, &dev_attr_cal_rssi); - if (ret < 0) { - stlc45xx_error("failed to create sysfs file cal_rssi"); - goto out; - } - - ret = device_create_file(&stlc45xx_device.dev, &dev_attr_cal_channels); - if (ret < 0) { - stlc45xx_error("failed to create sysfs file cal_channels"); - goto out; - } - - ret = device_create_file(&stlc45xx_device.dev, &dev_attr_tx_buf); - if (ret < 0) { - stlc45xx_error("failed to create sysfs file tx_buf"); - goto out; - } - - ret = stlc45xx_register_mac80211(stlc); - if (ret < 0) - goto out; - - stlc45xx_info("v" DRIVER_VERSION " loaded"); - - stlc45xx_info("config buffer 0x%x-0x%x", - FIRMWARE_CONFIG_START, FIRMWARE_CONFIG_END); - stlc45xx_info("tx 0x%x-0x%x, rx 0x%x-0x%x", - FIRMWARE_TXBUFFER_START, FIRMWARE_TXBUFFER_END, - FIRMWARE_RXBUFFER_START, FIRMWARE_RXBUFFER_END); - -out: - return ret; -} - -static int __devexit stlc45xx_remove(struct spi_device *spi) -{ - struct stlc45xx *stlc = dev_get_drvdata(&spi->dev); - - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - platform_device_unregister(&stlc45xx_device); - - ieee80211_unregister_hw(stlc->hw); - - free_irq(gpio_to_irq(stlc45xx_gpio_irq), spi); - - gpio_free(stlc45xx_gpio_power); - gpio_free(stlc45xx_gpio_irq); - - /* FIXME: free cal_channels and cal_rssi? */ - - kfree(stlc->fw); - - mutex_destroy(&stlc->mutex); - - /* frees also stlc */ - ieee80211_free_hw(stlc->hw); - stlc = NULL; - - return 0; -} - - -static struct spi_driver stlc45xx_spi_driver = { - .driver = { - /* use cx3110x name because board-n800.c uses that for the - * SPI port */ - .name = "cx3110x", - .bus = &spi_bus_type, - .owner = THIS_MODULE, - }, - - .probe = stlc45xx_probe, - .remove = __devexit_p(stlc45xx_remove), -}; - -static int __init stlc45xx_init(void) -{ - int ret; - - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - ret = spi_register_driver(&stlc45xx_spi_driver); - if (ret < 0) { - stlc45xx_error("failed to register SPI driver: %d", ret); - goto out; - } - -out: - return ret; -} - -static void __exit stlc45xx_exit(void) -{ - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - spi_unregister_driver(&stlc45xx_spi_driver); - - stlc45xx_info("unloaded"); -} - -module_init(stlc45xx_init); -module_exit(stlc45xx_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Kalle Valo "); -MODULE_ALIAS("spi:cx3110x"); diff --git a/drivers/staging/stlc45xx/stlc45xx.h b/drivers/staging/stlc45xx/stlc45xx.h deleted file mode 100644 index ac96bbb..0000000 --- a/drivers/staging/stlc45xx/stlc45xx.h +++ /dev/null @@ -1,283 +0,0 @@ -/* - * This file is part of stlc45xx - * - * Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies). - * - * Contact: Kalle Valo - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#include -#include -#include - -#include "stlc45xx_lmac.h" - -#define DRIVER_NAME "stlc45xx" -#define DRIVER_VERSION "0.1.3" - -#define DRIVER_PREFIX DRIVER_NAME ": " - -enum { - DEBUG_NONE = 0, - DEBUG_FUNC = 1 << 0, - DEBUG_IRQ = 1 << 1, - DEBUG_BH = 1 << 2, - DEBUG_RX = 1 << 3, - DEBUG_RX_CONTENT = 1 << 5, - DEBUG_TX = 1 << 6, - DEBUG_TX_CONTENT = 1 << 8, - DEBUG_TXBUFFER = 1 << 9, - DEBUG_QUEUE = 1 << 10, - DEBUG_BOOT = 1 << 11, - DEBUG_PSM = 1 << 12, - DEBUG_ALL = ~0, -}; - -#define DEBUG_LEVEL DEBUG_NONE -/* #define DEBUG_LEVEL DEBUG_ALL */ -/* #define DEBUG_LEVEL (DEBUG_TX | DEBUG_RX | DEBUG_IRQ) */ -/* #define DEBUG_LEVEL (DEBUG_TX | DEBUG_MEMREGION | DEBUG_QUEUE) */ -/* #define DEBUG_LEVEL (DEBUG_MEMREGION | DEBUG_QUEUE) */ - -#define stlc45xx_error(fmt, arg...) \ - printk(KERN_ERR DRIVER_PREFIX "ERROR " fmt "\n", ##arg) - -#define stlc45xx_warning(fmt, arg...) \ - printk(KERN_WARNING DRIVER_PREFIX "WARNING " fmt "\n", ##arg) - -#define stlc45xx_info(fmt, arg...) \ - printk(KERN_INFO DRIVER_PREFIX fmt "\n", ##arg) - -#define stlc45xx_debug(level, fmt, arg...) \ - do { \ - if (level & DEBUG_LEVEL) \ - printk(KERN_DEBUG DRIVER_PREFIX fmt "\n", ##arg); \ - } while (0) - -#define stlc45xx_dump(level, buf, len) \ - do { \ - if (level & DEBUG_LEVEL) \ - print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, \ - 16, 1, buf, len, 1); \ - } while (0) - -#define MAC2STR(a) ((a)[0], (a)[1], (a)[2], (a)[3], (a)[4], (a)[5]) -#define MACSTR "%02x:%02x:%02x:%02x:%02x:%02x" - -/* Bit 15 is read/write bit; ON = READ, OFF = WRITE */ -#define ADDR_READ_BIT_15 0x8000 - -#define SPI_ADRS_ARM_INTERRUPTS 0x00 -#define SPI_ADRS_ARM_INT_EN 0x04 - -#define SPI_ADRS_HOST_INTERRUPTS 0x08 -#define SPI_ADRS_HOST_INT_EN 0x0c -#define SPI_ADRS_HOST_INT_ACK 0x10 - -#define SPI_ADRS_GEN_PURP_1 0x14 -#define SPI_ADRS_GEN_PURP_2 0x18 - -/* high word */ -#define SPI_ADRS_DEV_CTRL_STAT 0x26 - -#define SPI_ADRS_DMA_DATA 0x28 - -#define SPI_ADRS_DMA_WRITE_CTRL 0x2c -#define SPI_ADRS_DMA_WRITE_LEN 0x2e -#define SPI_ADRS_DMA_WRITE_BASE 0x30 - -#define SPI_ADRS_DMA_READ_CTRL 0x34 -#define SPI_ADRS_DMA_READ_LEN 0x36 -#define SPI_ADRS_DMA_READ_BASE 0x38 - -#define SPI_CTRL_STAT_HOST_OVERRIDE 0x8000 -#define SPI_CTRL_STAT_START_HALTED 0x4000 -#define SPI_CTRL_STAT_RAM_BOOT 0x2000 -#define SPI_CTRL_STAT_HOST_RESET 0x1000 -#define SPI_CTRL_STAT_HOST_CPU_EN 0x0800 - -#define SPI_DMA_WRITE_CTRL_ENABLE 0x0001 -#define SPI_DMA_READ_CTRL_ENABLE 0x0001 -#define HOST_ALLOWED (1 << 7) - -#define FIRMWARE_ADDRESS 0x20000 - -#define SPI_TIMEOUT 100 /* msec */ - -#define SPI_MAX_TX_PACKETS 32 - -#define SPI_MAX_PACKET_SIZE 32767 - -#define SPI_TARGET_INT_WAKEUP 0x00000001 -#define SPI_TARGET_INT_SLEEP 0x00000002 -#define SPI_TARGET_INT_RDDONE 0x00000004 - -#define SPI_TARGET_INT_CTS 0x00004000 -#define SPI_TARGET_INT_DR 0x00008000 - -#define SPI_HOST_INT_READY 0x00000001 -#define SPI_HOST_INT_WR_READY 0x00000002 -#define SPI_HOST_INT_SW_UPDATE 0x00000004 -#define SPI_HOST_INT_UPDATE 0x10000000 - -/* clear to send */ -#define SPI_HOST_INT_CTS 0x00004000 - -/* data ready */ -#define SPI_HOST_INT_DR 0x00008000 - -#define SPI_HOST_INTS_DEFAULT \ - (SPI_HOST_INT_READY | SPI_HOST_INT_UPDATE | SPI_HOST_INT_SW_UPDATE) - -#define TARGET_BOOT_SLEEP 50 - -/* The firmware buffer is divided into three areas: - * - * o config area (for control commands) - * o tx buffer - * o rx buffer - */ -#define FIRMWARE_BUFFER_START 0x20200 -#define FIRMWARE_BUFFER_END 0x27c60 -#define FIRMWARE_BUFFER_LEN (FIRMWARE_BUFFER_END - FIRMWARE_BUFFER_START) -#define FIRMWARE_MTU 3240 -#define FIRMWARE_CONFIG_PAYLOAD_LEN 1024 -#define FIRMWARE_CONFIG_START FIRMWARE_BUFFER_START -#define FIRMWARE_CONFIG_LEN (sizeof(struct s_lm_control) + \ - FIRMWARE_CONFIG_PAYLOAD_LEN) -#define FIRMWARE_CONFIG_END (FIRMWARE_CONFIG_START + FIRMWARE_CONFIG_LEN - 1) -#define FIRMWARE_RXBUFFER_LEN (5 * FIRMWARE_MTU + 1024) -#define FIRMWARE_RXBUFFER_START (FIRMWARE_BUFFER_END - FIRMWARE_RXBUFFER_LEN) -#define FIRMWARE_RXBUFFER_END (FIRMWARE_RXBUFFER_START + \ - FIRMWARE_RXBUFFER_LEN - 1) -#define FIRMWARE_TXBUFFER_START (FIRMWARE_BUFFER_START + FIRMWARE_CONFIG_LEN) -#define FIRMWARE_TXBUFFER_LEN (FIRMWARE_BUFFER_LEN - FIRMWARE_CONFIG_LEN - \ - FIRMWARE_RXBUFFER_LEN) -#define FIRMWARE_TXBUFFER_END (FIRMWARE_TXBUFFER_START + \ - FIRMWARE_TXBUFFER_LEN - 1) - -#define FIRMWARE_TXBUFFER_HEADER 100 -#define FIRMWARE_TXBUFFER_TRAILER 4 - -/* FIXME: come up with a proper value */ -#define MAX_FRAME_LEN 2500 - -/* unit is ms */ -#define TX_FRAME_LIFETIME 2000 -#define TX_TIMEOUT 4000 - -#define SUPPORTED_CHANNELS 13 - -/* FIXME */ -/* #define CHANNEL_CAL_LEN offsetof(struct s_lmo_scan, bratemask) - \ */ -/* offsetof(struct s_lmo_scan, channel) */ -#define CHANNEL_CAL_LEN 292 -#define CHANNEL_CAL_ARRAY_LEN (SUPPORTED_CHANNELS * CHANNEL_CAL_LEN) -/* FIXME */ -/* #define RSSI_CAL_LEN sizeof(struct s_lmo_scan) - \ */ -/* offsetof(struct s_lmo_scan, rssical) */ -#define RSSI_CAL_LEN 8 -#define RSSI_CAL_ARRAY_LEN (SUPPORTED_CHANNELS * RSSI_CAL_LEN) - -struct s_dma_regs { - unsigned short cmd; - unsigned short len; - unsigned long addr; -}; - -struct stlc45xx_ie_tim { - u8 dtim_count; - u8 dtim_period; - u8 bmap_control; - u8 pvbmap[251]; -}; - -struct txbuffer { - /* can be removed when switched to skb queue */ - struct list_head tx_list; - - struct list_head buffer_list; - - int start; - int frame_start; - int end; - - struct sk_buff *skb; - u32 handle; - - bool status_needed; - - int header_len; - - /* unit jiffies */ - unsigned long lifetime; -}; - -enum fw_state { - FW_STATE_OFF, - FW_STATE_BOOTING, - FW_STATE_READY, - FW_STATE_RESET, - FW_STATE_RESETTING, -}; - -struct stlc45xx { - struct ieee80211_hw *hw; - struct spi_device *spi; - struct work_struct work; - struct work_struct work_reset; - struct delayed_work work_tx_timeout; - struct mutex mutex; - struct completion fw_comp; - - - u8 bssid[ETH_ALEN]; - u8 mac_addr[ETH_ALEN]; - int channel; - - u8 *cal_rssi; - u8 *cal_channels; - - enum fw_state fw_state; - - spinlock_t tx_lock; - - /* protected by tx_lock */ - struct list_head txbuffer; - - /* protected by tx_lock */ - struct list_head tx_pending; - - /* protected by tx_lock */ - int tx_queue_stopped; - - /* protected by mutex */ - struct list_head tx_sent; - - int tx_frames; - - u8 *fw; - int fw_len; - - bool psm; - bool associated; - int aid; - bool pspolling; -}; - - diff --git a/drivers/staging/stlc45xx/stlc45xx_lmac.h b/drivers/staging/stlc45xx/stlc45xx_lmac.h deleted file mode 100644 index af5db80..0000000 --- a/drivers/staging/stlc45xx/stlc45xx_lmac.h +++ /dev/null @@ -1,434 +0,0 @@ -/************************************************************************ -* This is the LMAC API interface header file for STLC4560. * -* Copyright (C) 2007 Conexant Systems, Inc. * -* This program is free software; you can redistribute it and/or * -* modify it under the terms of the GNU General Public License * -* as published by the Free Software Foundation; either version 2 * -* of the License, or (at your option) any later version. * -* * -* This program is distributed in the hope that it will be useful, * -* but WITHOUT ANY WARRANTY; without even the implied warranty of * -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * -* GNU General Public License for more details. * -* * -* You should have received a copy of the GNU General Public License * -* along with this program. If not, see .* -*************************************************************************/ - -#ifndef __lmac_h__ -#define __lmac_h__ - -#define LM_TOP_VARIANT 0x0506 -#define LM_BOTTOM_VARIANT 0x0506 - -/* - * LMAC - UMAC interface definition: - */ - -#define LM_FLAG_CONTROL 0x8000 -#define LM_FLAG_ALIGN 0x4000 - -#define LM_CTRL_OPSET 0x0001 - -#define LM_OUT_PROMISC 0x0001 -#define LM_OUT_TIMESTAMP 0x0002 -#define LM_OUT_SEQNR 0x0004 -#define LM_OUT_BURST 0x0010 -#define LM_OUT_NOCANCEL 0x0020 -#define LM_OUT_CLEARTIM 0x0040 -#define LM_OUT_HITCHHIKE 0x0080 -#define LM_OUT_COMPRESS 0x0100 -#define LM_OUT_CONCAT 0x0200 -#define LM_OUT_PCS_ACCEPT 0x0400 -#define LM_OUT_WAITEOSP 0x0800 - - -#define LM_ALOFT_SP 0x10 -#define LM_ALOFT_CTS 0x20 -#define LM_ALOFT_RTS 0x40 -#define LM_ALOFT_MASK 0x1f -#define LM_ALOFT_RATE 0x0f - -#define LM_IN_FCS_GOOD 0x0001 -#define LM_IN_MATCH_MAC 0x0002 -#define LM_IN_MCBC 0x0004 -#define LM_IN_BEACON 0x0008 -#define LM_IN_MATCH_BSS 0x0010 -#define LM_IN_BCAST_BSS 0x0020 -#define LM_IN_DATA 0x0040 -#define LM_IN_TRUNCATED 0x0080 - -#define LM_IN_TRANSPARENT 0x0200 - -#define LM_QUEUE_BEACON 0 -#define LM_QUEUE_SCAN 1 -#define LM_QUEUE_MGT 2 -#define LM_QUEUE_MCBC 3 -#define LM_QUEUE_DATA 4 -#define LM_QUEUE_DATA0 4 -#define LM_QUEUE_DATA1 5 -#define LM_QUEUE_DATA2 6 -#define LM_QUEUE_DATA3 7 - -#define LM_SETUP_INFRA 0x0001 -#define LM_SETUP_IBSS 0x0002 -#define LM_SETUP_TRANSPARENT 0x0008 -#define LM_SETUP_PROMISCUOUS 0x0010 -#define LM_SETUP_HIBERNATE 0x0020 -#define LM_SETUP_NOACK 0x0040 -#define LM_SETUP_RX_DISABLED 0x0080 - -#define LM_ANTENNA_0 0 -#define LM_ANTENNA_1 1 -#define LM_ANTENNA_DIVERSITY 2 - -#define LM_TX_FAILED 0x0001 -#define LM_TX_PSM 0x0002 -#define LM_TX_PSM_CANCELLED 0x0004 - -#define LM_SCAN_EXIT 0x0001 -#define LM_SCAN_TRAP 0x0002 -#define LM_SCAN_ACTIVE 0x0004 -#define LM_SCAN_FILTER 0x0008 - -#define LM_PSM 0x0001 -#define LM_PSM_DTIM 0x0002 -#define LM_PSM_MCBC 0x0004 -#define LM_PSM_CHECKSUM 0x0008 -#define LM_PSM_SKIP_MORE_DATA 0x0010 -#define LM_PSM_BEACON_TIMEOUT 0x0020 -#define LM_PSM_HFOSLEEP 0x0040 -#define LM_PSM_AUTOSWITCH_SLEEP 0x0080 -#define LM_PSM_LPIT 0x0100 -#define LM_PSM_BF_UCAST_SKIP 0x0200 -#define LM_PSM_BF_MCAST_SKIP 0x0400 - -/* hfosleep */ -#define LM_PSM_SLEEP_OPTION_MASK (LM_PSM_AUTOSWITCH_SLEEP | LM_PSM_HFOSLEEP) -#define LM_PSM_SLEEP_OPTION_SHIFT 6 -/* hfosleepend */ -#define LM_PSM_BF_OPTION_MASK (LM_PSM_BF_MCAST_SKIP | LM_PSM_BF_UCAST_SKIP) -#define LM_PSM_BF_OPTION_SHIFT 9 - - -#define LM_PRIVACC_WEP 0x01 -#define LM_PRIVACC_TKIP 0x02 -#define LM_PRIVACC_MICHAEL 0x04 -#define LM_PRIVACC_CCX_KP 0x08 -#define LM_PRIVACC_CCX_MIC 0x10 -#define LM_PRIVACC_AES_CCMP 0x20 - -/* size of s_lm_descr in words */ -#define LM_DESCR_SIZE_WORDS 11 - -#ifndef __ASSEMBLER__ - -enum { - LM_MODE_CLIENT = 0, - LM_MODE_AP -}; - -struct s_lm_descr { - uint16_t modes; - uint16_t flags; - uint32_t buffer_start; - uint32_t buffer_end; - uint8_t header; - uint8_t trailer; - uint8_t tx_queues; - uint8_t tx_depth; - uint8_t privacy; - uint8_t rx_keycache; - uint8_t tim_size; - uint8_t pad1; - uint8_t rates[16]; - uint32_t link; - uint16_t mtu; -}; - - -struct s_lm_control { - uint16_t flags; - uint16_t length; - uint32_t handle; - uint16_t oid; - uint16_t pad; - /* uint8_t data[]; */ -}; - -enum { - LM_PRIV_NONE = 0, - LM_PRIV_WEP, - LM_PRIV_TKIP, - LM_PRIV_TKIPMICHAEL, - LM_PRIV_CCX_WEPMIC, - LM_PRIV_CCX_KPMIC, - LM_PRIV_CCX_KP, - LM_PRIV_AES_CCMP -}; - -enum { - LM_DECRYPT_NONE, - LM_DECRYPT_OK, - LM_DECRYPT_NOKEY, - LM_DECRYPT_NOMICHAEL, - LM_DECRYPT_NOCKIPMIC, - LM_DECRYPT_FAIL_WEP, - LM_DECRYPT_FAIL_TKIP, - LM_DECRYPT_FAIL_MICHAEL, - LM_DECRYPT_FAIL_CKIPKP, - LM_DECRYPT_FAIL_CKIPMIC, - LM_DECRYPT_FAIL_AESCCMP -}; - -struct s_lm_data_out { - uint16_t flags; - uint16_t length; - uint32_t handle; - uint16_t aid; - uint8_t rts_retries; - uint8_t retries; - uint8_t aloft[8]; - uint8_t aloft_ctrl; - uint8_t crypt_offset; - uint8_t keytype; - uint8_t keylen; - uint8_t key[16]; - uint8_t queue; - uint8_t backlog; - uint16_t durations[4]; - uint8_t antenna; - uint8_t cts; - int16_t power; - uint8_t pad[2]; - /*uint8_t data[];*/ -}; - -#define LM_RCPI_INVALID (0xff) - -struct s_lm_data_in { - uint16_t flags; - uint16_t length; - uint16_t frequency; - uint8_t antenna; - uint8_t rate; - uint8_t rcpi; - uint8_t sq; - uint8_t decrypt; - uint8_t rssi_raw; - uint32_t clock[2]; - /*uint8_t data[];*/ -}; - -union u_lm_data { - struct s_lm_data_out out; - struct s_lm_data_in in; -}; - -enum { - LM_OID_SETUP = 0, - LM_OID_SCAN = 1, - LM_OID_TRAP = 2, - LM_OID_EDCF = 3, - LM_OID_KEYCACHE = 4, - LM_OID_PSM = 6, - LM_OID_TXCANCEL = 7, - LM_OID_TX = 8, - LM_OID_BURST = 9, - LM_OID_STATS = 10, - LM_OID_LED = 13, - LM_OID_TIMER = 15, - LM_OID_NAV = 20, - LM_OID_PCS = 22, - LM_OID_BT_BALANCER = 28, - LM_OID_GROUP_ADDRESS_TABLE = 30, - LM_OID_ARPTABLE = 31, - LM_OID_BT_OPTIONS = 35 -}; - -enum { - LM_FRONTEND_UNKNOWN = 0, - LM_FRONTEND_DUETTE3, - LM_FRONTEND_DUETTE2, - LM_FRONTEND_FRISBEE, - LM_FRONTEND_CROSSBOW, - LM_FRONTEND_LONGBOW -}; - - -#define INVALID_LPF_BANDWIDTH 0xffff -#define INVALID_OSC_START_DELAY 0xffff - -struct s_lmo_setup { - uint16_t flags; - uint8_t macaddr[6]; - uint8_t bssid[6]; - uint8_t antenna; - uint8_t rx_align; - uint32_t rx_buffer; - uint16_t rx_mtu; - uint16_t frontend; - uint16_t timeout; - uint16_t truncate; - uint32_t bratemask; - uint8_t sbss_offset; - uint8_t mcast_window; - uint8_t rx_rssi_threshold; - uint8_t rx_ed_threshold; - uint32_t ref_clock; - uint16_t lpf_bandwidth; - uint16_t osc_start_delay; -}; - - -struct s_lmo_scan { - uint16_t flags; - uint16_t dwell; - uint8_t channel[292]; - uint32_t bratemask; - uint8_t aloft[8]; - uint8_t rssical[8]; -}; - - -enum { - LM_TRAP_SCAN = 0, - LM_TRAP_TIMER, - LM_TRAP_BEACON_TX, - LM_TRAP_FAA_RADIO_ON, - LM_TRAP_FAA_RADIO_OFF, - LM_TRAP_RADAR, - LM_TRAP_NO_BEACON, - LM_TRAP_TBTT, - LM_TRAP_SCO_ENTER, - LM_TRAP_SCO_EXIT -}; - -struct s_lmo_trap { - uint16_t event; - uint16_t frequency; -}; - -struct s_lmo_timer { - uint32_t interval; -}; - -struct s_lmo_nav { - uint32_t period; -}; - - -struct s_lmo_edcf_queue; - -struct s_lmo_edcf { - uint8_t flags; - uint8_t slottime; - uint8_t sifs; - uint8_t eofpad; - struct s_lmo_edcf_queue { - uint8_t aifs; - uint8_t pad0; - uint16_t cwmin; - uint16_t cwmax; - uint16_t txop; - } queues[8]; - uint8_t mapping[4]; - uint16_t maxburst; - uint16_t round_trip_delay; -}; - -struct s_lmo_keycache { - uint8_t entry; - uint8_t keyid; - uint8_t address[6]; - uint8_t pad[2]; - uint8_t keytype; - uint8_t keylen; - uint8_t key[24]; -}; - - -struct s_lm_interval; - -struct s_lmo_psm { - uint16_t flags; - uint16_t aid; - struct s_lm_interval { - uint16_t interval; - uint16_t periods; - } intervals[4]; - /* uint16_t pad; */ - uint8_t beacon_rcpi_skip_max; - uint8_t rcpi_delta_threshold; - uint8_t nr; - uint8_t exclude[1]; -}; - -#define MC_FILTER_ADDRESS_NUM 4 - -struct s_lmo_group_address_table { - uint16_t filter_enable; - uint16_t num_address; - uint8_t macaddr_list[MC_FILTER_ADDRESS_NUM][6]; -}; - -struct s_lmo_txcancel { - uint32_t address[1]; -}; - - -struct s_lmo_tx { - uint8_t flags; - uint8_t retries; - uint8_t rcpi; - uint8_t sq; - uint16_t seqctrl; - uint8_t antenna; - uint8_t pad; -}; - -struct s_lmo_burst { - uint8_t flags; - uint8_t queue; - uint8_t backlog; - uint8_t pad; - uint16_t durations[32]; -}; - -struct s_lmo_stats { - uint32_t valid; - uint32_t fcs; - uint32_t abort; - uint32_t phyabort; - uint32_t rts_success; - uint32_t rts_fail; - uint32_t timestamp; - uint32_t time_tx; - uint32_t noisefloor; - uint32_t sample_noise[8]; - uint32_t sample_cca; - uint32_t sample_tx; -}; - - -struct s_lmo_led { - uint16_t flags; - uint16_t mask[2]; - uint16_t delay/*[2]*/; -}; - - -struct s_lmo_bt_balancer { - uint16_t prio_thresh; - uint16_t acl_thresh; -}; - - -struct s_lmo_arp_table { - uint16_t filter_enable; - uint32_t ipaddr; -}; - -#endif /* __ASSEMBLER__ */ - -#endif /* __lmac_h__ */ -- cgit v0.10.2 From 2cdf99ce2b9418c9d7c5f907195cfac421375520 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 26 Oct 2009 16:03:51 -0700 Subject: Staging: android: mark subsystem as broken It's causing lots of build errors, so just mark it as broken. It is scheduled to be removed in 2.6.33 anyway. Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/android/Kconfig b/drivers/staging/android/Kconfig index 2471949..eb67563 100644 --- a/drivers/staging/android/Kconfig +++ b/drivers/staging/android/Kconfig @@ -2,6 +2,7 @@ menu "Android" config ANDROID bool "Android Drivers" + depends on BROKEN default N ---help--- Enable support for various drivers needed on the Android platform -- cgit v0.10.2 From 049e62614abe79877d210e0661b141578e8df4cd Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 27 Oct 2009 15:46:18 -0700 Subject: Staging: wireless drivers Kconfig change Change the wireless drivers to depend on CONFIG_WLAN instead of CONFIG_WLAN_80211 which is going away soon. Cc: John W. Linville Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/otus/Kconfig b/drivers/staging/otus/Kconfig index d549d08..f6cc262 100644 --- a/drivers/staging/otus/Kconfig +++ b/drivers/staging/otus/Kconfig @@ -1,6 +1,6 @@ config OTUS tristate "Atheros OTUS 802.11n USB wireless support" - depends on USB && WLAN_80211 && MAC80211 + depends on USB && WLAN && MAC80211 default N ---help--- Enable support for Atheros 802.11n USB hardware: diff --git a/drivers/staging/rt2860/Kconfig b/drivers/staging/rt2860/Kconfig index 7f44e5e..efe38e2 100644 --- a/drivers/staging/rt2860/Kconfig +++ b/drivers/staging/rt2860/Kconfig @@ -1,5 +1,5 @@ config RT2860 tristate "Ralink 2860 wireless support" - depends on PCI && X86 && WLAN_80211 + depends on PCI && X86 && WLAN ---help--- This is an experimental driver for the Ralink 2860 wireless chip. diff --git a/drivers/staging/rt2870/Kconfig b/drivers/staging/rt2870/Kconfig index 76841f6..aea5c82 100644 --- a/drivers/staging/rt2870/Kconfig +++ b/drivers/staging/rt2870/Kconfig @@ -1,5 +1,5 @@ config RT2870 tristate "Ralink 2870/3070 wireless support" - depends on USB && X86 && WLAN_80211 + depends on USB && X86 && WLAN ---help--- This is an experimental driver for the Ralink xx70 wireless chips. diff --git a/drivers/staging/rt3090/Kconfig b/drivers/staging/rt3090/Kconfig index 255e8ea..2b3f745 100644 --- a/drivers/staging/rt3090/Kconfig +++ b/drivers/staging/rt3090/Kconfig @@ -1,5 +1,5 @@ config RT3090 tristate "Ralink 3090 wireless support" - depends on PCI && X86 && WLAN_80211 + depends on PCI && X86 && WLAN ---help--- This is an experimental driver for the Ralink 3090 wireless chip. diff --git a/drivers/staging/winbond/Kconfig b/drivers/staging/winbond/Kconfig index 940460c..132671d 100644 --- a/drivers/staging/winbond/Kconfig +++ b/drivers/staging/winbond/Kconfig @@ -1,6 +1,6 @@ config W35UND tristate "IS89C35 WLAN USB driver" - depends on MAC80211 && WLAN_80211 && USB && EXPERIMENTAL + depends on MAC80211 && WLAN && USB && EXPERIMENTAL default n ---help--- This is highly experimental driver for Winbond WIFI card. diff --git a/drivers/staging/wlan-ng/Kconfig b/drivers/staging/wlan-ng/Kconfig index 9959b65..f44294b 100644 --- a/drivers/staging/wlan-ng/Kconfig +++ b/drivers/staging/wlan-ng/Kconfig @@ -1,6 +1,6 @@ config PRISM2_USB tristate "Prism2.5/3 USB driver" - depends on WLAN_80211 && USB && WIRELESS_EXT + depends on WLAN && USB && WIRELESS_EXT default n ---help--- This is the wlan-ng prism 2.5/3 USB driver for a wide range of -- cgit v0.10.2 From b881c6cbb313dc3618075e81cd618e6ef7a3d159 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 29 Oct 2009 09:52:02 -0700 Subject: Staging: fix wireless drivers depends These drivers can (erroneously) be enabled even when CONFIG_NET=n, CONFIG_NETDEVICES=n, CONFIG_WLAN=n, etc. Stop this. Signed-off-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/rtl8187se/Kconfig b/drivers/staging/rtl8187se/Kconfig index 236e427..203c79b 100644 --- a/drivers/staging/rtl8187se/Kconfig +++ b/drivers/staging/rtl8187se/Kconfig @@ -1,6 +1,6 @@ config RTL8187SE tristate "RealTek RTL8187SE Wireless LAN NIC driver" - depends on PCI + depends on PCI && WLAN depends on WIRELESS_EXT default N ---help--- diff --git a/drivers/staging/rtl8192e/Kconfig b/drivers/staging/rtl8192e/Kconfig index 3100aa5..37e4fde 100644 --- a/drivers/staging/rtl8192e/Kconfig +++ b/drivers/staging/rtl8192e/Kconfig @@ -1,6 +1,6 @@ config RTL8192E tristate "RealTek RTL8192E Wireless LAN NIC driver" - depends on PCI + depends on PCI && WLAN depends on WIRELESS_EXT default N ---help--- diff --git a/drivers/staging/rtl8192su/Kconfig b/drivers/staging/rtl8192su/Kconfig index 770f412..b8c95f9 100644 --- a/drivers/staging/rtl8192su/Kconfig +++ b/drivers/staging/rtl8192su/Kconfig @@ -1,6 +1,6 @@ config RTL8192SU tristate "RealTek RTL8192SU Wireless LAN NIC driver" - depends on PCI + depends on PCI && WLAN depends on WIRELESS_EXT default N ---help--- -- cgit v0.10.2 From 40ac7b62d8c132c73a709bd83858b3419f38ec23 Mon Sep 17 00:00:00 2001 From: George Nassar Date: Wed, 14 Oct 2009 18:27:41 -0500 Subject: USB: rndis_host: debug info clobbered before it is logged The MTU throttle-down if a RNDIS device doesn't support a particular packet size is being incorrectly logged. The attempted packet size is being clobbered before it gets logged. First patch; please inform if I'm doing this incorrectly. Diff'd against latest official source as per the FAQ; forward port to current git version is straightforward. Signed-off-by: George Nassar Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c index 0caa800..f56dec6 100644 --- a/drivers/net/usb/rndis_host.c +++ b/drivers/net/usb/rndis_host.c @@ -362,12 +362,12 @@ generic_rndis_bind(struct usbnet *dev, struct usb_interface *intf, int flags) retval = -EINVAL; goto halt_fail_and_release; } - dev->hard_mtu = tmp; - net->mtu = dev->hard_mtu - net->hard_header_len; dev_warn(&intf->dev, "dev can't take %u byte packets (max %u), " "adjusting MTU to %u\n", - dev->hard_mtu, tmp, net->mtu); + dev->hard_mtu, tmp, tmp - net->hard_header_len); + dev->hard_mtu = tmp; + net->mtu = dev->hard_mtu - net->hard_header_len; } /* REVISIT: peripheral "alignment" request is ignored ... */ -- cgit v0.10.2 From 3c77d5137d3f4ff41721e9b4f4812db56a6065c0 Mon Sep 17 00:00:00 2001 From: Elina Pasheva Date: Fri, 16 Oct 2009 12:04:54 -0700 Subject: USB: serial: sierra driver send_setup() autopm fix This patch presents a fix for the autosuspend feature implementation in sierra usb serial driver for function sierra_send_setup(). Because it is possible to call sierra_send_setup() before sierra_open() or after sierra_close() we added a get/put interface activity to assure that the usb control can happen even when the device is autosuspended. Signed-off-by: Elina Pasheva Tested-by: Matthew Safar Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 4588398..3ec79df 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -296,7 +296,6 @@ struct sierra_port_private { int dsr_state; int dcd_state; int ri_state; - unsigned int opened:1; }; @@ -306,6 +305,8 @@ static int sierra_send_setup(struct usb_serial_port *port) struct sierra_port_private *portdata; __u16 interface = 0; int val = 0; + int do_send = 0; + int retval; dev_dbg(&port->dev, "%s\n", __func__); @@ -324,10 +325,7 @@ static int sierra_send_setup(struct usb_serial_port *port) */ if (port->interrupt_in_urb) { /* send control message */ - return usb_control_msg(serial->dev, - usb_rcvctrlpipe(serial->dev, 0), - 0x22, 0x21, val, interface, - NULL, 0, USB_CTRL_SET_TIMEOUT); + do_send = 1; } } @@ -339,12 +337,18 @@ static int sierra_send_setup(struct usb_serial_port *port) interface = 1; else if (port->bulk_out_endpointAddress == 5) interface = 2; - return usb_control_msg(serial->dev, - usb_rcvctrlpipe(serial->dev, 0), - 0x22, 0x21, val, interface, - NULL, 0, USB_CTRL_SET_TIMEOUT); + + do_send = 1; } - return 0; + if (!do_send) + return 0; + + usb_autopm_get_interface(serial->interface); + retval = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + 0x22, 0x21, val, interface, NULL, 0, USB_CTRL_SET_TIMEOUT); + usb_autopm_put_interface(serial->interface); + + return retval; } static void sierra_set_termios(struct tty_struct *tty, -- cgit v0.10.2 From b64dc0a597fd3c66d888df0886635eba210cc19f Mon Sep 17 00:00:00 2001 From: Elina Pasheva Date: Tue, 27 Oct 2009 13:49:59 -0700 Subject: USB: serial: sierra driver autopm fixes This patch presents fixes for the autosuspend feature implementation in sierra usb serial driver in functions sierra_open(), sierra_close() and stop_read_write_urbs(). The patch "sierra_close() must resume the device before it notifies it of a closure" submitted by Oliver Neukum on Wed, October 14 has been merged as fix in sierra_close() function. The bug fix in sierra_open() function restores the autopm interface state on error condition. The bug fix in in stop_read_write_urbs() function assures that both receive and interrupt urbs are recycled. Signed-off-by: Elina Pasheva Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 3ec79df..5019325 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -777,8 +777,11 @@ static void sierra_close(struct usb_serial_port *port) if (serial->dev) { mutex_lock(&serial->disc_mutex); - if (!serial->disconnected) + if (!serial->disconnected) { + serial->interface->needs_remote_wakeup = 0; + usb_autopm_get_interface(serial->interface); sierra_send_setup(port); + } mutex_unlock(&serial->disc_mutex); spin_lock_irq(&intfdata->susp_lock); portdata->opened = 0; @@ -792,8 +795,6 @@ static void sierra_close(struct usb_serial_port *port) sierra_release_urb(portdata->in_urbs[i]); portdata->in_urbs[i] = NULL; } - usb_autopm_get_interface(serial->interface); - serial->interface->needs_remote_wakeup = 0; } } @@ -831,6 +832,8 @@ static int sierra_open(struct tty_struct *tty, struct usb_serial_port *port) if (err) { /* get rid of everything as in close */ sierra_close(port); + /* restore balance for autopm */ + usb_autopm_put_interface(serial->interface); return err; } sierra_send_setup(port); @@ -919,7 +922,7 @@ static void sierra_release(struct usb_serial *serial) #ifdef CONFIG_PM static void stop_read_write_urbs(struct usb_serial *serial) { - int i, j; + int i; struct usb_serial_port *port; struct sierra_port_private *portdata; @@ -927,8 +930,7 @@ static void stop_read_write_urbs(struct usb_serial *serial) for (i = 0; i < serial->num_ports; ++i) { port = serial->port[i]; portdata = usb_get_serial_port_data(port); - for (j = 0; j < N_IN_URB; j++) - usb_kill_urb(portdata->in_urbs[j]); + sierra_stop_rx_urbs(port); usb_kill_anchored_urbs(&portdata->active); } } -- cgit v0.10.2 From 1e6159f858f5da608612ae10d6554bb7ecac9755 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Wed, 21 Oct 2009 20:33:39 +0900 Subject: USB: r8a66597-hcd: fix cannot detect a device when uses_new_polling is set Signed-off-by: Yoshihiro Shimoda Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index 749b537..e33d362 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -1003,19 +1003,20 @@ static void r8a66597_check_syssts(struct r8a66597 *r8a66597, int port, if (syssts == SE0) { r8a66597_write(r8a66597, ~ATTCH, get_intsts_reg(port)); r8a66597_bset(r8a66597, ATTCHE, get_intenb_reg(port)); - return; - } + } else { + if (syssts == FS_JSTS) + r8a66597_bset(r8a66597, HSE, get_syscfg_reg(port)); + else if (syssts == LS_JSTS) + r8a66597_bclr(r8a66597, HSE, get_syscfg_reg(port)); - if (syssts == FS_JSTS) - r8a66597_bset(r8a66597, HSE, get_syscfg_reg(port)); - else if (syssts == LS_JSTS) - r8a66597_bclr(r8a66597, HSE, get_syscfg_reg(port)); + r8a66597_write(r8a66597, ~DTCH, get_intsts_reg(port)); + r8a66597_bset(r8a66597, DTCHE, get_intenb_reg(port)); - r8a66597_write(r8a66597, ~DTCH, get_intsts_reg(port)); - r8a66597_bset(r8a66597, DTCHE, get_intenb_reg(port)); + if (r8a66597->bus_suspended) + usb_hcd_resume_root_hub(r8a66597_to_hcd(r8a66597)); + } - if (r8a66597->bus_suspended) - usb_hcd_resume_root_hub(r8a66597_to_hcd(r8a66597)); + usb_hcd_poll_rh_status(r8a66597_to_hcd(r8a66597)); } /* this function must be called with interrupt disabled */ @@ -1024,6 +1025,8 @@ static void r8a66597_usb_connect(struct r8a66597 *r8a66597, int port) u16 speed = get_rh_usb_speed(r8a66597, port); struct r8a66597_root_hub *rh = &r8a66597->root_hub[port]; + rh->port &= ~((1 << USB_PORT_FEAT_HIGHSPEED) | + (1 << USB_PORT_FEAT_LOWSPEED)); if (speed == HSMODE) rh->port |= (1 << USB_PORT_FEAT_HIGHSPEED); else if (speed == LSMODE) -- cgit v0.10.2 From fead2ab6cf9ad3a84a06e68ccc20d1e460fad13e Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Thu, 22 Oct 2009 15:00:36 +0800 Subject: USB: option: TLAYTECH TUE800 support Add ID for Tlaytech TUE800 CDMA modem to the option driver. Signed-off-by: Bryan Wu Acked-By: Matthias Urlichs Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 65d96b2..cd44c68 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -315,6 +315,9 @@ static int option_resume(struct usb_serial *serial); #define QISDA_PRODUCT_H20_4515 0x4515 #define QISDA_PRODUCT_H20_4519 0x4519 +/* TLAYTECH PRODUCTS */ +#define TLAYTECH_VENDOR_ID 0x20B9 +#define TLAYTECH_PRODUCT_TEU800 0x1682 /* TOSHIBA PRODUCTS */ #define TOSHIBA_VENDOR_ID 0x0930 @@ -593,6 +596,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ALINK_VENDOR_ID, ALINK_PRODUCT_3GU, 0xff, 0xff, 0xff) }, { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S) }, { USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) }, + { USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); -- cgit v0.10.2 From 37c4fd8c7551c7419a5faf87a76ff6949c5adaf3 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 29 Oct 2009 19:50:43 +0300 Subject: USB: fsl_udc_core: Fix kernel oops on module removal fsl_udc_release() calls dma_free_coherent() with an inappropriate device passed to it, and since the device has no dma_ops, the following oops pops up: Kernel BUG at d103ce9c [verbose debug info unavailable] Oops: Exception in kernel mode, sig: 5 [#1] ... NIP [d103ce9c] fsl_udc_release+0x50/0x80 [fsl_usb2_udc] LR [d103ce74] fsl_udc_release+0x28/0x80 [fsl_usb2_udc] Call Trace: [cfbc7dc0] [d103ce74] fsl_udc_release+0x28/0x80 [fsl_usb2_udc] [cfbc7dd0] [c01a35c4] device_release+0x2c/0x90 [cfbc7de0] [c016b480] kobject_cleanup+0x58/0x98 [cfbc7e00] [c016c52c] kref_put+0x54/0x6c [cfbc7e10] [c016b360] kobject_put+0x34/0x64 [cfbc7e20] [c01a1d0c] put_device+0x1c/0x2c [cfbc7e30] [d103dbfc] fsl_udc_remove+0xc0/0x1e4 [fsl_usb2_udc] ... This patch fixes the issue by passing dev->parent, which points to a correct device. Signed-off-by: Anton Vorontsov Cc: Li Yang Cc: David Brownell Cc: Guennadi Liakhovetski Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index 42a74b8..fa3d142 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -2139,7 +2139,7 @@ static int fsl_proc_read(char *page, char **start, off_t off, int count, static void fsl_udc_release(struct device *dev) { complete(udc_controller->done); - dma_free_coherent(dev, udc_controller->ep_qh_size, + dma_free_coherent(dev->parent, udc_controller->ep_qh_size, udc_controller->ep_qh, udc_controller->ep_qh_dma); kfree(udc_controller); } -- cgit v0.10.2 From 39acbc12affcaa23ef1d887ba3d197baca8e6e47 Mon Sep 17 00:00:00 2001 From: Stas Sergeev Date: Sun, 18 Oct 2009 00:31:38 +0400 Subject: Driver core: fix driver_register() return value In this patch: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=16dc42e018c2868211b4928f20a957c0c216126c the check was added for another driver to already claim the same device on the same bus. But the returned error code was wrong: to modprobe, the -EEXIST means that _this_ driver is already installed. It therefore doesn't produce the needed error message when _another_ driver is trying to register for the same device. Returning -EBUSY fixes the problem. Signed-off-by: Stas Sergeev Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/base/driver.c b/drivers/base/driver.c index ed2ebd3..f367885 100644 --- a/drivers/base/driver.c +++ b/drivers/base/driver.c @@ -236,7 +236,7 @@ int driver_register(struct device_driver *drv) put_driver(other); printk(KERN_ERR "Error: Driver '%s' is already registered, " "aborting...\n", drv->name); - return -EEXIST; + return -EBUSY; } ret = bus_add_driver(drv); -- cgit v0.10.2 From 1a6f2a7512021ceae3c4201c7aab07f032e9ce91 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Mon, 12 Oct 2009 20:17:41 -0700 Subject: Driver core: allow certain drivers prohibit bind/unbind via sysfs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Platform drivers registered via platform_driver_probe() can be bound to devices only once, upon registration, because discard their probe() routines to save memory. Unbinding the driver through sysfs 'unbind' leaves the device stranded and confuses users so let's not create bind and unbind attributes for such drivers. Signed-off-by: Dmitry Torokhov Cc: Éric Piel Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/base/bus.c b/drivers/base/bus.c index 973bf2a..63c143e 100644 --- a/drivers/base/bus.c +++ b/drivers/base/bus.c @@ -689,15 +689,19 @@ int bus_add_driver(struct device_driver *drv) printk(KERN_ERR "%s: driver_add_attrs(%s) failed\n", __func__, drv->name); } - error = add_bind_files(drv); - if (error) { - /* Ditto */ - printk(KERN_ERR "%s: add_bind_files(%s) failed\n", - __func__, drv->name); + + if (!drv->suppress_bind_attrs) { + error = add_bind_files(drv); + if (error) { + /* Ditto */ + printk(KERN_ERR "%s: add_bind_files(%s) failed\n", + __func__, drv->name); + } } kobject_uevent(&priv->kobj, KOBJ_ADD); return 0; + out_unregister: kfree(drv->p); drv->p = NULL; @@ -720,7 +724,8 @@ void bus_remove_driver(struct device_driver *drv) if (!drv->bus) return; - remove_bind_files(drv); + if (!drv->suppress_bind_attrs) + remove_bind_files(drv); driver_remove_attrs(drv->bus, drv); driver_remove_file(drv, &driver_attr_uevent); klist_remove(&drv->p->knode_bus); diff --git a/drivers/base/platform.c b/drivers/base/platform.c index ed156a13..4fa954b 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -521,11 +521,15 @@ int __init_or_module platform_driver_probe(struct platform_driver *drv, { int retval, code; + /* make sure driver won't have bind/unbind attributes */ + drv->driver.suppress_bind_attrs = true; + /* temporary section violation during probe() */ drv->probe = probe; retval = code = platform_driver_register(drv); - /* Fixup that section violation, being paranoid about code scanning + /* + * Fixup that section violation, being paranoid about code scanning * the list of drivers in order to probe new devices. Check to see * if the probe was successful, and make sure any forced probes of * new devices fail. diff --git a/include/linux/device.h b/include/linux/device.h index aca31bf..2ea3e49 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -124,7 +124,9 @@ struct device_driver { struct bus_type *bus; struct module *owner; - const char *mod_name; /* used for built-in modules */ + const char *mod_name; /* used for built-in modules */ + + bool suppress_bind_attrs; /* disables bind/unbind via sysfs */ int (*probe) (struct device *dev); int (*remove) (struct device *dev); -- cgit v0.10.2 From 468727ab1273a0f95562befa611a3ce39778599c Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Wed, 21 Oct 2009 21:45:15 -0600 Subject: Documentation: ABI: rename sysfs-devices-cache_disable properly Rename sysfs-devices-cache_disable to sysfs-devices-system-cpu, in order to keep a stricter correlation between a sysfs directory and its documentation. Reported-by: David Rientjes Signed-off-by: Alex Chiang Acked-by: David Rientjes Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/ABI/testing/sysfs-devices-cache_disable b/Documentation/ABI/testing/sysfs-devices-cache_disable deleted file mode 100644 index 175bb4f..0000000 --- a/Documentation/ABI/testing/sysfs-devices-cache_disable +++ /dev/null @@ -1,18 +0,0 @@ -What: /sys/devices/system/cpu/cpu*/cache/index*/cache_disable_X -Date: August 2008 -KernelVersion: 2.6.27 -Contact: mark.langsdorf@amd.com -Description: These files exist in every cpu's cache index directories. - There are currently 2 cache_disable_# files in each - directory. Reading from these files on a supported - processor will return that cache disable index value - for that processor and node. Writing to one of these - files will cause the specificed cache index to be disabled. - - Currently, only AMD Family 10h Processors support cache index - disable, and only for their L3 caches. See the BIOS and - Kernel Developer's Guide at - http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/31116-Public-GH-BKDG_3.20_2-4-09.pdf - for formatting information and other details on the - cache index disable. -Users: joachim.deguara@amd.com diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu new file mode 100644 index 0000000..175bb4f --- /dev/null +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -0,0 +1,18 @@ +What: /sys/devices/system/cpu/cpu*/cache/index*/cache_disable_X +Date: August 2008 +KernelVersion: 2.6.27 +Contact: mark.langsdorf@amd.com +Description: These files exist in every cpu's cache index directories. + There are currently 2 cache_disable_# files in each + directory. Reading from these files on a supported + processor will return that cache disable index value + for that processor and node. Writing to one of these + files will cause the specificed cache index to be disabled. + + Currently, only AMD Family 10h Processors support cache index + disable, and only for their L3 caches. See the BIOS and + Kernel Developer's Guide at + http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/31116-Public-GH-BKDG_3.20_2-4-09.pdf + for formatting information and other details on the + cache index disable. +Users: joachim.deguara@amd.com -- cgit v0.10.2 From 2ceb3fb0a78c671892b01319ac8e3baede33a78c Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Wed, 21 Oct 2009 21:45:20 -0600 Subject: Documentation: ABI: document /sys/devices/system/cpu/ This interface has been around for a long time, but hasn't been officially documented. Document the top level sysfs directory for CPU attributes. Signed-off-by: Alex Chiang Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index 175bb4f..86126b1 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -1,3 +1,15 @@ +What: /sys/devices/system/cpu/ +Date: pre-git history +Contact: Linux kernel mailing list +Description: + A collection of both global and individual CPU attributes + + Individual CPU attributes are contained in subdirectories + named by the kernel's logical CPU number, e.g.: + + /sys/devices/system/cpu/cpu#/ + + What: /sys/devices/system/cpu/cpu*/cache/index*/cache_disable_X Date: August 2008 KernelVersion: 2.6.27 -- cgit v0.10.2 From d93fc863d2d2cea1057996c39cef368f41741448 Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Wed, 21 Oct 2009 21:45:25 -0600 Subject: Documentation: ABI: /sys/devices/system/cpu/ topology files Add brief descriptions for the following sysfs files: /sys/devices/system/cpu/kernel_max /sys/devices/system/cpu/offline /sys/devices/system/cpu/online /sys/devices/system/cpu/possible /sys/devices/system/cpu/present Excerpted the relevant information from Documentation/cputopology.txt and pointed back to cputopology.txt as the authoritative source of information. Cc: Mike Travis Cc: Rusty Russell Signed-off-by: Alex Chiang Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index 86126b1..871acdb 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -10,6 +10,34 @@ Description: /sys/devices/system/cpu/cpu#/ +What: /sys/devices/system/cpu/kernel_max + /sys/devices/system/cpu/offline + /sys/devices/system/cpu/online + /sys/devices/system/cpu/possible + /sys/devices/system/cpu/present +Date: December 2008 +Contact: Linux kernel mailing list +Description: CPU topology files that describe kernel limits related to + hotplug. Briefly: + + kernel_max: the maximum cpu index allowed by the kernel + configuration. + + offline: cpus that are not online because they have been + HOTPLUGGED off or exceed the limit of cpus allowed by the + kernel configuration (kernel_max above). + + online: cpus that are online and being scheduled. + + possible: cpus that have been allocated resources and can be + brought online if they are present. + + present: cpus that have been identified as being present in + the system. + + See Documentation/cputopology.txt for more information. + + What: /sys/devices/system/cpu/cpu*/cache/index*/cache_disable_X Date: August 2008 KernelVersion: 2.6.27 -- cgit v0.10.2 From 663fb2fc733006f685400fb44551303b72b61a88 Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Wed, 21 Oct 2009 21:45:31 -0600 Subject: Documentation: ABI: /sys/devices/system/cpu/cpu#/ topology files Add brief descriptions for the following sysfs files: /sys/devices/system/cpu/cpu#/topology/core_id /sys/devices/system/cpu/cpu#/topology/core_siblings /sys/devices/system/cpu/cpu#/topology/core_siblings_list /sys/devices/system/cpu/cpu#/topology/physical_package_id /sys/devices/system/cpu/cpu#/topology/thread_siblings /sys/devices/system/cpu/cpu#/topology/thread_siblings_list The descriptions in Documentation/cputopology.txt weren't very informative, so I attempted a better description based on code reading and hopeful guessing. Updated Documentation/cputopology.txt with the better descriptions and fixed some style issues. Cc: Mike Travis Cc: Rusty Russell Signed-off-by: Alex Chiang Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index 871acdb..2ade5c0 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -38,6 +38,45 @@ Description: CPU topology files that describe kernel limits related to See Documentation/cputopology.txt for more information. +What: /sys/devices/system/cpu/cpu#/topology/core_id + /sys/devices/system/cpu/cpu#/topology/core_siblings + /sys/devices/system/cpu/cpu#/topology/core_siblings_list + /sys/devices/system/cpu/cpu#/topology/physical_package_id + /sys/devices/system/cpu/cpu#/topology/thread_siblings + /sys/devices/system/cpu/cpu#/topology/thread_siblings_list +Date: December 2008 +Contact: Linux kernel mailing list +Description: CPU topology files that describe a logical CPU's relationship + to other cores and threads in the same physical package. + + One cpu# directory is created per logical CPU in the system, + e.g. /sys/devices/system/cpu/cpu42/. + + Briefly, the files above are: + + core_id: the CPU core ID of cpu#. Typically it is the + hardware platform's identifier (rather than the kernel's). + The actual value is architecture and platform dependent. + + core_siblings: internal kernel map of cpu#'s hardware threads + within the same physical_package_id. + + core_siblings_list: human-readable list of the logical CPU + numbers within the same physical_package_id as cpu#. + + physical_package_id: physical package id of cpu#. Typically + corresponds to a physical socket number, but the actual value + is architecture and platform dependent. + + thread_siblings: internel kernel map of cpu#'s hardware + threads within the same core as cpu# + + thread_siblings_list: human-readable list of cpu#'s hardware + threads within the same core as cpu# + + See Documentation/cputopology.txt for more information. + + What: /sys/devices/system/cpu/cpu*/cache/index*/cache_disable_X Date: August 2008 KernelVersion: 2.6.27 diff --git a/Documentation/cputopology.txt b/Documentation/cputopology.txt index b41f3e5..f1c5c4b 100644 --- a/Documentation/cputopology.txt +++ b/Documentation/cputopology.txt @@ -1,15 +1,28 @@ -Export cpu topology info via sysfs. Items (attributes) are similar +Export CPU topology info via sysfs. Items (attributes) are similar to /proc/cpuinfo. 1) /sys/devices/system/cpu/cpuX/topology/physical_package_id: -represent the physical package id of cpu X; + + physical package id of cpuX. Typically corresponds to a physical + socket number, but the actual value is architecture and platform + dependent. + 2) /sys/devices/system/cpu/cpuX/topology/core_id: -represent the cpu core id to cpu X; + + the CPU core ID of cpuX. Typically it is the hardware platform's + identifier (rather than the kernel's). The actual value is + architecture and platform dependent. + 3) /sys/devices/system/cpu/cpuX/topology/thread_siblings: -represent the thread siblings to cpu X in the same core; + + internel kernel map of cpuX's hardware threads within the same + core as cpuX + 4) /sys/devices/system/cpu/cpuX/topology/core_siblings: -represent the thread siblings to cpu X in the same physical package; + + internal kernel map of cpuX's hardware threads within the same + physical_package_id. To implement it in an architecture-neutral way, a new source file, drivers/base/topology.c, is to export the 4 attributes. @@ -32,32 +45,32 @@ not defined by include/asm-XXX/topology.h: 3) thread_siblings: just the given CPU 4) core_siblings: just the given CPU -Additionally, cpu topology information is provided under +Additionally, CPU topology information is provided under /sys/devices/system/cpu and includes these files. The internal source for the output is in brackets ("[]"). - kernel_max: the maximum cpu index allowed by the kernel configuration. + kernel_max: the maximum CPU index allowed by the kernel configuration. [NR_CPUS-1] - offline: cpus that are not online because they have been + offline: CPUs that are not online because they have been HOTPLUGGED off (see cpu-hotplug.txt) or exceed the limit - of cpus allowed by the kernel configuration (kernel_max + of CPUs allowed by the kernel configuration (kernel_max above). [~cpu_online_mask + cpus >= NR_CPUS] - online: cpus that are online and being scheduled [cpu_online_mask] + online: CPUs that are online and being scheduled [cpu_online_mask] - possible: cpus that have been allocated resources and can be + possible: CPUs that have been allocated resources and can be brought online if they are present. [cpu_possible_mask] - present: cpus that have been identified as being present in the + present: CPUs that have been identified as being present in the system. [cpu_present_mask] The format for the above output is compatible with cpulist_parse() [see ]. Some examples follow. -In this example, there are 64 cpus in the system but cpus 32-63 exceed +In this example, there are 64 CPUs in the system but cpus 32-63 exceed the kernel max which is limited to 0..31 by the NR_CPUS config option -being 32. Note also that cpus 2 and 4-31 are not online but could be +being 32. Note also that CPUs 2 and 4-31 are not online but could be brought online as they are both present and possible. kernel_max: 31 @@ -67,8 +80,8 @@ brought online as they are both present and possible. present: 0-31 In this example, the NR_CPUS config option is 128, but the kernel was -started with possible_cpus=144. There are 4 cpus in the system and cpu2 -was manually taken offline (and is the only cpu that can be brought +started with possible_cpus=144. There are 4 CPUs in the system and cpu2 +was manually taken offline (and is the only CPU that can be brought online.) kernel_max: 127 @@ -78,4 +91,4 @@ online.) present: 0-3 See cpu-hotplug.txt for the possible_cpus=NUM kernel start parameter -as well as more information on the various cpumask's. +as well as more information on the various cpumasks. -- cgit v0.10.2 From e6dcfa7c61c4d31797a12d738bfe0bdec0ca2be1 Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Wed, 21 Oct 2009 21:45:36 -0600 Subject: Documentation: ABI: /sys/devices/system/cpu/sched_[mc|smt]_power_savings Document sched_[mc|smt]_power_savings by reading existing code and git logs. Cc: Suresh Siddha Cc: Ingo Molnar Signed-off-by: Alex Chiang Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index 2ade5c0..8cdda1c 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -9,6 +9,30 @@ Description: /sys/devices/system/cpu/cpu#/ +What: /sys/devices/system/cpu/sched_mc_power_savings + /sys/devices/system/cpu/sched_smt_power_savings +Date: June 2006 +Contact: Linux kernel mailing list +Description: Discover and adjust the kernel's multi-core scheduler support. + + Possible values are: + + 0 - No power saving load balance (default value) + 1 - Fill one thread/core/package first for long running threads + 2 - Also bias task wakeups to semi-idle cpu package for power + savings + + sched_mc_power_savings is dependent upon SCHED_MC, which is + itself architecture dependent. + + sched_smt_power_savings is dependent upon SCHED_SMT, which + is itself architecture dependent. + + The two files are independent of each other. It is possible + that one file may be present without the other. + + Introduced by git commit 5c45bf27. + What: /sys/devices/system/cpu/kernel_max /sys/devices/system/cpu/offline -- cgit v0.10.2 From c1fb5c475126b77b47ba762f5b48535cd0420d24 Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Wed, 21 Oct 2009 21:45:41 -0600 Subject: Documentation: ABI: /sys/devices/system/cpu/cpuidle/ Document cpuidle sysfs attributes by reading code, Documentation/cpuidle/, and git logs. Cc: Venki Pallipadi Cc: Len Brown Signed-off-by: Alex Chiang Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index 8cdda1c..968d8ba 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -101,6 +101,26 @@ Description: CPU topology files that describe a logical CPU's relationship See Documentation/cputopology.txt for more information. +What: /sys/devices/system/cpu/cpuidle/current_driver + /sys/devices/system/cpu/cpuidle/current_governer_ro +Date: September 2007 +Contact: Linux kernel mailing list +Description: Discover cpuidle policy and mechanism + + Various CPUs today support multiple idle levels that are + differentiated by varying exit latencies and power + consumption during idle. + + Idle policy (governor) is differentiated from idle mechanism + (driver) + + current_driver: displays current idle mechanism + + current_governor_ro: displays current idle policy + + See files in Documentation/cpuidle/ for more information. + + What: /sys/devices/system/cpu/cpu*/cache/index*/cache_disable_X Date: August 2008 KernelVersion: 2.6.27 -- cgit v0.10.2 From 657348a056eea4a27be20cf8e22c98a252597447 Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Wed, 21 Oct 2009 22:15:30 -0600 Subject: Documentation: ABI: /sys/devices/system/cpu/cpu#/node Describe NUMA node symlink created for CPUs when CONFIG_NUMA is set. Cc: Randy Dunlap Signed-off-by: Alex Chiang Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index 968d8ba..a703b9e 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -62,6 +62,21 @@ Description: CPU topology files that describe kernel limits related to See Documentation/cputopology.txt for more information. + +What: /sys/devices/system/cpu/cpu#/node +Date: October 2009 +Contact: Linux memory management mailing list +Description: Discover NUMA node a CPU belongs to + + When CONFIG_NUMA is enabled, a symbolic link that points + to the corresponding NUMA node directory. + + For example, the following symlink is created for cpu42 + in NUMA node 2: + + /sys/devices/system/cpu/cpu42/node2 -> ../../node/node2 + + What: /sys/devices/system/cpu/cpu#/topology/core_id /sys/devices/system/cpu/cpu#/topology/core_siblings /sys/devices/system/cpu/cpu#/topology/core_siblings_list -- cgit v0.10.2 From 89a8640279f8bb78aaf778d1fc5c4a6778f18064 Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 30 Oct 2009 13:13:26 +0000 Subject: NOMMU: Don't pass NULL pointers to fput() in do_mmap_pgoff() Don't pass NULL pointers to fput() in the error handling paths of the NOMMU do_mmap_pgoff() as it can't handle it. The following can be used as a test program: int main() { static long long a[1024 * 1024 * 20] = { 0 }; return a;} Without the patch, the code oopses in atomic_long_dec_and_test() as called by fput() after the kernel complains that it can't allocate that big a chunk of memory. With the patch, the kernel just complains about the allocation size and then the program segfaults during execve() as execve() can't complete the allocation of all the new ELF program segments. Reported-by: Robin Getz Signed-off-by: David Howells Acked-by: Robin Getz Cc: stable@kernel.org Signed-off-by: Linus Torvalds diff --git a/mm/nommu.c b/mm/nommu.c index 5189b5a..9876fa0 100644 --- a/mm/nommu.c +++ b/mm/nommu.c @@ -1362,9 +1362,11 @@ share: error_just_free: up_write(&nommu_region_sem); error: - fput(region->vm_file); + if (region->vm_file) + fput(region->vm_file); kmem_cache_free(vm_region_jar, region); - fput(vma->vm_file); + if (vma->vm_file) + fput(vma->vm_file); if (vma->vm_flags & VM_EXECUTABLE) removed_exe_file_vma(vma->vm_mm); kmem_cache_free(vm_area_cachep, vma); -- cgit v0.10.2 From aefba418bfecd1985a08f50a95bd854a119f0153 Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Fri, 30 Oct 2009 17:02:31 +0900 Subject: dpt_i2o: Fix typo of EINVAL Commit ef7562b7f28319e6dd1f85dc1af87df2a7a84832 ("dpt_i2o: Fix up copy*user") had a silly typo: EINVAL should be -EINVAL. Signed-off-by: OGAWA Hirofumi Cc: stable@kernel.org Cc: Alan Cox Signed-off-by: Linus Torvalds diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c index 7d1aac3..4967643 100644 --- a/drivers/scsi/dpt_i2o.c +++ b/drivers/scsi/dpt_i2o.c @@ -1919,7 +1919,7 @@ static int adpt_i2o_passthru(adpt_hba* pHba, u32 __user *arg) size = size>>16; size *= 4; if (size > MAX_MESSAGE_SIZE) { - rcode = EINVAL; + rcode = -EINVAL; goto cleanup; } /* Copy in the user's I2O command */ -- cgit v0.10.2 From 426fcd2a351e4bf662fee9fa2cf2603a48223164 Mon Sep 17 00:00:00 2001 From: Philby John Date: Wed, 28 Oct 2009 19:09:12 +0100 Subject: ARM: 5774/1: Fix Realview ARM1176PB board reboot This is the fix for proper reboot of Realview ARM1176PB board when issuing the reboot command. Setting the eighth bit of control register SYS_RESETCTL to 1 to force a soft reset. arch_reset() is modified for realview machines to call machine specific reset function pointers. Signed-off-by: Philby John Acked-by: Catalin Marinas Signed-off-by: Russell King diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h index 46cd6ac..699671f 100644 --- a/arch/arm/mach-realview/core.h +++ b/arch/arm/mach-realview/core.h @@ -61,5 +61,5 @@ extern void realview_timer_init(unsigned int timer_irq); extern int realview_flash_register(struct resource *res, u32 num); extern int realview_eth_register(const char *name, struct resource *res); extern int realview_usb_register(struct resource *res); - +extern void (*realview_reset)(char); #endif diff --git a/arch/arm/mach-realview/include/mach/board-pb1176.h b/arch/arm/mach-realview/include/mach/board-pb1176.h index 98f8e7e..34b80b7 100644 --- a/arch/arm/mach-realview/include/mach/board-pb1176.h +++ b/arch/arm/mach-realview/include/mach/board-pb1176.h @@ -73,4 +73,9 @@ #define REALVIEW_PB1176_GIC_DIST_BASE 0x10041000 /* GIC distributor, on FPGA */ #define REALVIEW_PB1176_L220_BASE 0x10110000 /* L220 registers */ +/* + * Control register SYS_RESETCTL is set to 1 to force a soft reset + */ +#define REALVIEW_PB1176_SYS_LOCKVAL_RSTCTL 0x0100 + #endif /* __ASM_ARCH_BOARD_PB1176_H */ diff --git a/arch/arm/mach-realview/include/mach/board-pb11mp.h b/arch/arm/mach-realview/include/mach/board-pb11mp.h index f0d68e0..7abf918 100644 --- a/arch/arm/mach-realview/include/mach/board-pb11mp.h +++ b/arch/arm/mach-realview/include/mach/board-pb11mp.h @@ -81,4 +81,16 @@ #define REALVIEW_TC11MP_GIC_DIST_BASE 0x1F001000 /* Test chip interrupt controller distributor */ #define REALVIEW_TC11MP_L220_BASE 0x1F002000 /* L220 registers */ + /* + * Values for REALVIEW_SYS_RESET_CTRL + */ +#define REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGCLR 0x01 +#define REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGINIT 0x02 +#define REALVIEW_PB11MP_SYS_CTRL_RESET_DLLRESET 0x03 +#define REALVIEW_PB11MP_SYS_CTRL_RESET_PLLRESET 0x04 +#define REALVIEW_PB11MP_SYS_CTRL_RESET_POR 0x05 +#define REALVIEW_PB11MP_SYS_CTRL_RESET_DoC 0x06 + +#define REALVIEW_PB11MP_SYS_CTRL_LED (1 << 0) + #endif /* __ASM_ARCH_BOARD_PB11MP_H */ diff --git a/arch/arm/mach-realview/include/mach/platform.h b/arch/arm/mach-realview/include/mach/platform.h index c8f5083..4f46bf7 100644 --- a/arch/arm/mach-realview/include/mach/platform.h +++ b/arch/arm/mach-realview/include/mach/platform.h @@ -119,19 +119,6 @@ #define REALVIEW_SYS_TEST_OSC3 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC3_OFFSET) #define REALVIEW_SYS_TEST_OSC4 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC4_OFFSET) -/* - * Values for REALVIEW_SYS_RESET_CTRL - */ -#define REALVIEW_SYS_CTRL_RESET_CONFIGCLR 0x01 -#define REALVIEW_SYS_CTRL_RESET_CONFIGINIT 0x02 -#define REALVIEW_SYS_CTRL_RESET_DLLRESET 0x03 -#define REALVIEW_SYS_CTRL_RESET_PLLRESET 0x04 -#define REALVIEW_SYS_CTRL_RESET_POR 0x05 -#define REALVIEW_SYS_CTRL_RESET_DoC 0x06 - -#define REALVIEW_SYS_CTRL_LED (1 << 0) - - /* ------------------------------------------------------------------------ * RealView control registers * ------------------------------------------------------------------------ @@ -153,7 +140,7 @@ * SYS_CLD, SYS_BOOTCS */ #define REALVIEW_SYS_LOCK_LOCKED (1 << 16) -#define REALVIEW_SYS_LOCKVAL_MASK 0xFFFF /* write 0xA05F to enable write access */ +#define REALVIEW_SYS_LOCKVAL_MASK 0xA05F /* Enable write access */ /* * REALVIEW_SYS_FLASH diff --git a/arch/arm/mach-realview/include/mach/system.h b/arch/arm/mach-realview/include/mach/system.h index 1a15a44..a30f2e3 100644 --- a/arch/arm/mach-realview/include/mach/system.h +++ b/arch/arm/mach-realview/include/mach/system.h @@ -25,6 +25,8 @@ #include #include +void (*realview_reset)(char mode); + static inline void arch_idle(void) { /* @@ -36,16 +38,12 @@ static inline void arch_idle(void) static inline void arch_reset(char mode, const char *cmd) { - void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_RESETCTL_OFFSET; - unsigned int val; - /* * To reset, we hit the on-board reset register * in the system FPGA */ - val = __raw_readl(hdr_ctrl); - val |= REALVIEW_SYS_CTRL_RESET_CONFIGCLR; - __raw_writel(val, hdr_ctrl); + if (realview_reset) + realview_reset(mode); } #endif diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index 2817fe0..a6ba147 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -290,6 +290,16 @@ static struct sys_timer realview_pb1176_timer = { .init = realview_pb1176_timer_init, }; +static void realview_pb1176_reset(char mode) +{ + void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) + + REALVIEW_SYS_RESETCTL_OFFSET; + void __iomem *rst_hdr_ctrl = __io_address(REALVIEW_SYS_BASE) + + REALVIEW_SYS_LOCK_OFFSET; + __raw_writel(REALVIEW_SYS_LOCKVAL_MASK, rst_hdr_ctrl); + __raw_writel(REALVIEW_PB1176_SYS_LOCKVAL_RSTCTL, hdr_ctrl); +} + static void __init realview_pb1176_init(void) { int i; @@ -313,6 +323,7 @@ static void __init realview_pb1176_init(void) #ifdef CONFIG_LEDS leds_event = realview_leds_event; #endif + realview_reset = realview_pb1176_reset; } MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176") diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index 94680fc..070d284 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -299,6 +299,21 @@ static struct sys_timer realview_pb11mp_timer = { .init = realview_pb11mp_timer_init, }; +static void realview_pb11mp_reset(char mode) +{ + void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) + + REALVIEW_SYS_RESETCTL_OFFSET; + unsigned int val; + + /* + * To reset, we hit the on-board reset register + * in the system FPGA + */ + val = __raw_readl(hdr_ctrl); + val |= REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGCLR; + __raw_writel(val, hdr_ctrl); +} + static void __init realview_pb11mp_init(void) { int i; @@ -324,6 +339,7 @@ static void __init realview_pb11mp_init(void) #ifdef CONFIG_LEDS leds_event = realview_leds_event; #endif + realview_reset = realview_pb11mp_reset; } MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore") -- cgit v0.10.2 From 16121d70fdf9eeb05ead46b241a293156323dbbe Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Sun, 1 Nov 2009 19:27:05 -0500 Subject: x86: Fix printk message typo in mtrr cleanup code Trivial typo. Signed-off-by: Dave Jones LKML-Reference: Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/cpu/mtrr/cleanup.c b/arch/x86/kernel/cpu/mtrr/cleanup.c index 315738c..73c86db 100644 --- a/arch/x86/kernel/cpu/mtrr/cleanup.c +++ b/arch/x86/kernel/cpu/mtrr/cleanup.c @@ -846,7 +846,7 @@ int __init mtrr_cleanup(unsigned address_bits) sort(range, nr_range, sizeof(struct res_range), cmp_range, NULL); range_sums = sum_ranges(range, nr_range); - printk(KERN_INFO "total RAM coverred: %ldM\n", + printk(KERN_INFO "total RAM covered: %ldM\n", range_sums >> (20 - PAGE_SHIFT)); if (mtrr_chunk_size && mtrr_gran_size) { -- cgit v0.10.2 From a1bf808849f25a4d668f81415ecebb2da9fecf8e Mon Sep 17 00:00:00 2001 From: Daniel T Chen Date: Sun, 1 Nov 2009 18:32:29 -0500 Subject: ALSA: hda: Use quirk mask for Dell Inspiron Mini9/Vostro A90 using ALC268 BugLink: https://bugs.launchpad.net/bugs/368629 We should use a quirk mask for these Dell Inspiron Mini9s and Vostro A90s, as the model=dell quirk appears to enable audio on them. Signed-off-by: Daniel T Chen Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 9b1cff8..148734d 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -12602,7 +12602,8 @@ static struct snd_pci_quirk alc268_cfg_tbl[] = { SND_PCI_QUIRK(0x1025, 0x015b, "Acer Aspire One", ALC268_ACER_ASPIRE_ONE), SND_PCI_QUIRK(0x1028, 0x0253, "Dell OEM", ALC268_DELL), - SND_PCI_QUIRK(0x1028, 0x02b0, "Dell Inspiron Mini9", ALC268_DELL), + SND_PCI_QUIRK_MASK(0x1028, 0xfff0, 0x02b0, + "Dell Inspiron Mini9/Vostro A90", ALC268_DELL), /* almost compatible with toshiba but with optional digital outs; * auto-probing seems working fine */ -- cgit v0.10.2 From ad0bf11070ebb3c95f8ce82e6219dbd79c8e8b69 Mon Sep 17 00:00:00 2001 From: Alberto Bertogli Date: Mon, 2 Nov 2009 11:39:22 +0100 Subject: bio_put(): add bio_clone() to the list of functions in the comment In bio_put()'s comment, add bio_clone() to the list of functions that can give you a bio reference. Signed-off-by: Alberto Bertogli Signed-off-by: Jens Axboe diff --git a/fs/bio.c b/fs/bio.c index 402cb84..bcab9e9 100644 --- a/fs/bio.c +++ b/fs/bio.c @@ -407,7 +407,7 @@ EXPORT_SYMBOL(zero_fill_bio); * * Description: * Put a reference to a &struct bio, either one you have gotten with - * bio_alloc or bio_get. The last put of a bio will free it. + * bio_alloc, bio_get or bio_clone. The last put of a bio will free it. **/ void bio_put(struct bio *bio) { -- cgit v0.10.2 From 5f04eeb8a76521dec371ceb05e8263889a8af2bc Mon Sep 17 00:00:00 2001 From: Alberto Bertogli Date: Mon, 2 Nov 2009 11:39:42 +0100 Subject: Fix bio_alloc() and bio_kmalloc() documentation Commit 451a9ebf accidentally broke bio_alloc() and bio_kmalloc() comments by (almost) swapping them. This patch fixes that, by placing the comments in the right place. Signed-off-by: Alberto Bertogli Acked-by: Tejun Heo Signed-off-by: Jens Axboe diff --git a/fs/bio.c b/fs/bio.c index bcab9e9..12da5db 100644 --- a/fs/bio.c +++ b/fs/bio.c @@ -325,8 +325,16 @@ static void bio_fs_destructor(struct bio *bio) * @gfp_mask: allocation mask to use * @nr_iovecs: number of iovecs * - * Allocate a new bio with @nr_iovecs bvecs. If @gfp_mask - * contains __GFP_WAIT, the allocation is guaranteed to succeed. + * bio_alloc will allocate a bio and associated bio_vec array that can hold + * at least @nr_iovecs entries. Allocations will be done from the + * fs_bio_set. Also see @bio_alloc_bioset and @bio_kmalloc. + * + * If %__GFP_WAIT is set, then bio_alloc will always be able to allocate + * a bio. This is due to the mempool guarantees. To make this work, callers + * must never allocate more than 1 bio at a time from this pool. Callers + * that need to allocate more than 1 bio must always submit the previously + * allocated bio for IO before attempting to allocate a new one. Failure to + * do so can cause livelocks under memory pressure. * * RETURNS: * Pointer to new bio on success, NULL on failure. @@ -350,21 +358,13 @@ static void bio_kmalloc_destructor(struct bio *bio) } /** - * bio_alloc - allocate a bio for I/O + * bio_kmalloc - allocate a bio for I/O using kmalloc() * @gfp_mask: the GFP_ mask given to the slab allocator * @nr_iovecs: number of iovecs to pre-allocate * * Description: - * bio_alloc will allocate a bio and associated bio_vec array that can hold - * at least @nr_iovecs entries. Allocations will be done from the - * fs_bio_set. Also see @bio_alloc_bioset. - * - * If %__GFP_WAIT is set, then bio_alloc will always be able to allocate - * a bio. This is due to the mempool guarantees. To make this work, callers - * must never allocate more than 1 bio at a time from this pool. Callers - * that need to allocate more than 1 bio must always submit the previously - * allocated bio for IO before attempting to allocate a new one. Failure to - * do so can cause livelocks under memory pressure. + * Allocate a new bio with @nr_iovecs bvecs. If @gfp_mask contains + * %__GFP_WAIT, the allocation is guaranteed to succeed. * **/ struct bio *bio_kmalloc(gfp_t gfp_mask, int nr_iovecs) -- cgit v0.10.2 From 0d488234fd857aae07f1c56467bbf58f1a859753 Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Sat, 24 Oct 2009 21:43:03 +0200 Subject: ALSA: pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (sound) Convert PCMCIA drivers to use the dynamic debug infrastructure, instead of requiring manual settings of PCMCIA_DEBUG. Also, remove all usages of the CS_CHECK macro and replace them with proper Linux style calling and return value checking. The extra error reporting may be dropped, as the PCMCIA core already complains about any (non-driver-author) errors. Signed-off-by: Dominik Brodowski Signed-off-by: Takashi Iwai diff --git a/sound/pcmcia/pdaudiocf/pdaudiocf.c b/sound/pcmcia/pdaudiocf/pdaudiocf.c index 7dea74b..64b8599 100644 --- a/sound/pcmcia/pdaudiocf/pdaudiocf.c +++ b/sound/pcmcia/pdaudiocf/pdaudiocf.c @@ -217,20 +217,25 @@ static void snd_pdacf_detach(struct pcmcia_device *link) * configuration callback */ -#define CS_CHECK(fn, ret) \ -do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) - static int pdacf_config(struct pcmcia_device *link) { struct snd_pdacf *pdacf = link->priv; - int last_fn, last_ret; + int ret; snd_printdd(KERN_DEBUG "pdacf_config called\n"); link->conf.ConfigIndex = 0x5; - CS_CHECK(RequestIO, pcmcia_request_io(link, &link->io)); - CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); - CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf)); + ret = pcmcia_request_io(link, &link->io); + if (ret) + goto failed; + + ret = pcmcia_request_irq(link, &link->irq); + if (ret) + goto failed; + + ret = pcmcia_request_configuration(link, &link->conf); + if (ret) + goto failed; if (snd_pdacf_assign_resources(pdacf, link->io.BasePort1, link->irq.AssignedIRQ) < 0) goto failed; @@ -238,8 +243,6 @@ static int pdacf_config(struct pcmcia_device *link) link->dev_node = &pdacf->node; return 0; -cs_failed: - cs_error(link, last_fn, last_ret); failed: pcmcia_disable_device(link); return -ENODEV; diff --git a/sound/pcmcia/vx/vxpocket.c b/sound/pcmcia/vx/vxpocket.c index 7445cc8..1492744 100644 --- a/sound/pcmcia/vx/vxpocket.c +++ b/sound/pcmcia/vx/vxpocket.c @@ -213,14 +213,11 @@ static int snd_vxpocket_assign_resources(struct vx_core *chip, int port, int irq * configuration callback */ -#define CS_CHECK(fn, ret) \ -do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) - static int vxpocket_config(struct pcmcia_device *link) { struct vx_core *chip = link->priv; struct snd_vxpocket *vxp = (struct snd_vxpocket *)chip; - int last_fn, last_ret; + int ret; snd_printdd(KERN_DEBUG "vxpocket_config called\n"); @@ -235,9 +232,17 @@ static int vxpocket_config(struct pcmcia_device *link) strcpy(chip->card->driver, vxp440_hw.name); } - CS_CHECK(RequestIO, pcmcia_request_io(link, &link->io)); - CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); - CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf)); + ret = pcmcia_request_io(link, &link->io); + if (ret) + goto failed; + + ret = pcmcia_request_irq(link, &link->irq); + if (ret) + goto failed; + + ret = pcmcia_request_configuration(link, &link->conf); + if (ret) + goto failed; chip->dev = &handle_to_dev(link); snd_card_set_dev(chip->card, chip->dev); @@ -248,8 +253,6 @@ static int vxpocket_config(struct pcmcia_device *link) link->dev_node = &vxp->node; return 0; -cs_failed: - cs_error(link, last_fn, last_ret); failed: pcmcia_disable_device(link); return -ENODEV; -- cgit v0.10.2 From 22242681cff52bfb7cba5d2a37b91802be7a4e4c Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 2 Nov 2009 12:00:01 +0100 Subject: MIPS: Extend COMMAND_LINE_SIZE Some firmware may pass well over 256 bytes these days. Signed-off-by: Ralf Baechle diff --git a/arch/mips/include/asm/setup.h b/arch/mips/include/asm/setup.h index e600ced..50511aa 100644 --- a/arch/mips/include/asm/setup.h +++ b/arch/mips/include/asm/setup.h @@ -1,7 +1,7 @@ #ifndef _MIPS_SETUP_H #define _MIPS_SETUP_H -#define COMMAND_LINE_SIZE 256 +#define COMMAND_LINE_SIZE 4096 #ifdef __KERNEL__ extern void setup_early_printk(void); -- cgit v0.10.2 From d30cecbcbe149a36a354757cea835c1bb28689cf Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 27 May 2009 17:29:37 +0100 Subject: MIPS: Don't write ones to reserved entryhi bits. We've silently been relying on the hardware chopping off excess, reserved ASID bits for no better reason that it saving an instruction. Because we already have: #define cpu_asid(cpu, mm) (cpu_context((cpu), (mm)) & ASID_MASK) in . We can use a cleanup to avoid writing non-zero bits into the reserved entryhi bits. This avoid triggering some debugging assertion in the Cavium simulator. Signed-off-by: Ralf Baechle diff --git a/arch/mips/include/asm/mmu_context.h b/arch/mips/include/asm/mmu_context.h index d974353..ed331c2 100644 --- a/arch/mips/include/asm/mmu_context.h +++ b/arch/mips/include/asm/mmu_context.h @@ -165,12 +165,12 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, * having ASID_MASK smaller than the hardware maximum, * make sure no "soft" bits become "hard"... */ - write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK) - | (cpu_context(cpu, next) & ASID_MASK)); + write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK) | + cpu_asid(cpu, next)); ehb(); /* Make sure it propagates to TCStatus */ evpe(mtflags); #else - write_c0_entryhi(cpu_context(cpu, next)); + write_c0_entryhi(cpu_asid(cpu, next)); #endif /* CONFIG_MIPS_MT_SMTC */ TLBMISS_HANDLER_SETUP_PGD(next->pgd); @@ -226,11 +226,11 @@ activate_mm(struct mm_struct *prev, struct mm_struct *next) } /* See comments for similar code above */ write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK) | - (cpu_context(cpu, next) & ASID_MASK)); + cpu_asid(cpu, next)); ehb(); /* Make sure it propagates to TCStatus */ evpe(mtflags); #else - write_c0_entryhi(cpu_context(cpu, next)); + write_c0_entryhi(cpu_asid(cpu, next)); #endif /* CONFIG_MIPS_MT_SMTC */ TLBMISS_HANDLER_SETUP_PGD(next->pgd); -- cgit v0.10.2 From 067f3290f7508f492e2f838222766fa1874606c5 Mon Sep 17 00:00:00 2001 From: David Daney Date: Thu, 1 Oct 2009 16:47:38 -0700 Subject: MIPS: Octeon: Fix compile error in arch/mips/cavium-octeon/smp.c Signed-off-by: David Daney Signed-off-by: Ralf Baechle diff --git a/arch/mips/cavium-octeon/smp.c b/arch/mips/cavium-octeon/smp.c index 32d51a3..c198efd 100644 --- a/arch/mips/cavium-octeon/smp.c +++ b/arch/mips/cavium-octeon/smp.c @@ -65,11 +65,12 @@ void octeon_send_ipi_single(int cpu, unsigned int action) cvmx_write_csr(CVMX_CIU_MBOX_SETX(coreid), action); } -static inline void octeon_send_ipi_mask(cpumask_t mask, unsigned int action) +static inline void octeon_send_ipi_mask(const struct cpumask *mask, + unsigned int action) { unsigned int i; - for_each_cpu_mask(i, mask) + for_each_cpu_mask(i, *mask) octeon_send_ipi_single(i, action); } -- cgit v0.10.2 From 962a9dd47e7d92a9b29e7114c108bcff3ad0eb05 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 7 Oct 2009 01:59:20 +0200 Subject: MIPS: Cleanup CONFIG_DEBUG_STACK_USAGE version of alloc_thread_info. Signed-off-by: Ralf Baechle diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h index 01cc163..845da21 100644 --- a/arch/mips/include/asm/thread_info.h +++ b/arch/mips/include/asm/thread_info.h @@ -86,14 +86,7 @@ register struct thread_info *__current_thread_info __asm__("$28"); #define __HAVE_ARCH_THREAD_INFO_ALLOCATOR #ifdef CONFIG_DEBUG_STACK_USAGE -#define alloc_thread_info(tsk) \ -({ \ - struct thread_info *ret; \ - \ - ret = kzalloc(THREAD_SIZE, GFP_KERNEL); \ - \ - ret; \ -}) +#define alloc_thread_info(tsk) kzalloc(THREAD_SIZE, GFP_KERNEL) #else #define alloc_thread_info(tsk) kmalloc(THREAD_SIZE, GFP_KERNEL) #endif -- cgit v0.10.2 From 01a6fbf759a17940079fbdc0a4d43b596f323e7b Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 7 Oct 2009 22:11:08 +0200 Subject: MIPS: IP27: Fix build Broken by 182a85f8a119c789610a9d464f4129ded9f3c107. Signed-off-by: Ralf Baechle diff --git a/arch/mips/include/asm/mach-ip27/topology.h b/arch/mips/include/asm/mach-ip27/topology.h index f683742..09a59bc 100644 --- a/arch/mips/include/asm/mach-ip27/topology.h +++ b/arch/mips/include/asm/mach-ip27/topology.h @@ -44,8 +44,8 @@ extern unsigned char __node_distances[MAX_COMPACT_NODES][MAX_COMPACT_NODES]; .busy_factor = 32, \ .imbalance_pct = 125, \ .cache_nice_tries = 1, \ - .flags = SD_LOAD_BALANCE \ - | SD_BALANCE_EXEC \ + .flags = SD_LOAD_BALANCE | \ + SD_BALANCE_EXEC, \ .last_balance = jiffies, \ .balance_interval = 1, \ .nr_balance_failed = 0, \ -- cgit v0.10.2 From b40bb20e74a02dbe80fc7be6d0f9f05344051d20 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Thu, 8 Oct 2009 20:39:50 +0800 Subject: MIPS: Loongson: Remove redundant local_irq_disable() That code is executed with irq disabled already, so, remove the redundant local_irq_disable() here. Signed-off-by: Wu Zhangjin Signed-off-by: Ralf Baechle diff --git a/arch/mips/loongson/common/irq.c b/arch/mips/loongson/common/irq.c index f368c73..b32b4a3 100644 --- a/arch/mips/loongson/common/irq.c +++ b/arch/mips/loongson/common/irq.c @@ -55,7 +55,6 @@ void __init arch_init_irq(void) * int-handler is not on bootstrap */ clear_c0_status(ST0_IM | ST0_BEV); - local_irq_disable(); /* setting irq trigger mode */ set_irq_trigger_mode(); -- cgit v0.10.2 From f45e5183618e41e3c8dbf87b74dc47d0c531462a Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Thu, 8 Oct 2009 21:17:54 +0800 Subject: MIPS: Add IRQF_TIMER flag for timer interrupts Along the lines of d6c585a4342a2ff627a29f9aea77c5ed4cd76023, add IRQF_TIMER flag for all timer interrupts This ensures that timer interrupts won't be disabled on suspend and not threaded for PREEMPT_RT. Signed-off-by: Wu Zhangjin Acked-by: Thomas Gleixner Signed-off-by: Ralf Baechle diff --git a/arch/mips/jazz/irq.c b/arch/mips/jazz/irq.c index 7fd170d..7bd32d0 100644 --- a/arch/mips/jazz/irq.c +++ b/arch/mips/jazz/irq.c @@ -134,7 +134,7 @@ static irqreturn_t r4030_timer_interrupt(int irq, void *dev_id) static struct irqaction r4030_timer_irqaction = { .handler = r4030_timer_interrupt, - .flags = IRQF_DISABLED, + .flags = IRQF_DISABLED | IRQF_TIMER, .name = "R4030 timer", }; diff --git a/arch/mips/kernel/cevt-gt641xx.c b/arch/mips/kernel/cevt-gt641xx.c index 92351e0..f5d265e 100644 --- a/arch/mips/kernel/cevt-gt641xx.c +++ b/arch/mips/kernel/cevt-gt641xx.c @@ -113,7 +113,7 @@ static irqreturn_t gt641xx_timer0_interrupt(int irq, void *dev_id) static struct irqaction gt641xx_timer0_irqaction = { .handler = gt641xx_timer0_interrupt, - .flags = IRQF_DISABLED | IRQF_PERCPU, + .flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_TIMER, .name = "gt641xx_timer0", }; diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c index 2652362..b469ad0 100644 --- a/arch/mips/kernel/cevt-r4k.c +++ b/arch/mips/kernel/cevt-r4k.c @@ -83,7 +83,7 @@ out: struct irqaction c0_compare_irqaction = { .handler = c0_compare_interrupt, - .flags = IRQF_DISABLED | IRQF_PERCPU, + .flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_TIMER, .name = "timer", }; diff --git a/arch/mips/kernel/i8253.c b/arch/mips/kernel/i8253.c index f7d8d5d..ed5c441 100644 --- a/arch/mips/kernel/i8253.c +++ b/arch/mips/kernel/i8253.c @@ -98,7 +98,7 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id) static struct irqaction irq0 = { .handler = timer_interrupt, - .flags = IRQF_DISABLED | IRQF_NOBALANCING, + .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_TIMER, .name = "timer" }; diff --git a/arch/mips/nxp/pnx8550/common/time.c b/arch/mips/nxp/pnx8550/common/time.c index 18b1927..d987a89 100644 --- a/arch/mips/nxp/pnx8550/common/time.c +++ b/arch/mips/nxp/pnx8550/common/time.c @@ -59,7 +59,7 @@ static irqreturn_t pnx8xxx_timer_interrupt(int irq, void *dev_id) static struct irqaction pnx8xxx_timer_irq = { .handler = pnx8xxx_timer_interrupt, - .flags = IRQF_DISABLED | IRQF_PERCPU, + .flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_TIMER, .name = "pnx8xxx_timer", }; diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c index 6d0e59f..d6802d6 100644 --- a/arch/mips/sgi-ip27/ip27-timer.c +++ b/arch/mips/sgi-ip27/ip27-timer.c @@ -105,7 +105,7 @@ static irqreturn_t hub_rt_counter_handler(int irq, void *dev_id) struct irqaction hub_rt_irqaction = { .handler = hub_rt_counter_handler, - .flags = IRQF_DISABLED | IRQF_PERCPU, + .flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_TIMER, .name = "hub-rt", }; diff --git a/arch/mips/sni/time.c b/arch/mips/sni/time.c index 62df6a5..f3b60e6 100644 --- a/arch/mips/sni/time.c +++ b/arch/mips/sni/time.c @@ -67,7 +67,7 @@ static irqreturn_t a20r_interrupt(int irq, void *dev_id) static struct irqaction a20r_irqaction = { .handler = a20r_interrupt, - .flags = IRQF_DISABLED | IRQF_PERCPU, + .flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_TIMER, .name = "a20r-timer", }; -- cgit v0.10.2 From a22d621c80fb08f668ae3bfe62aeaae64b0b2b89 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 8 Oct 2009 22:16:47 +0200 Subject: MIPS: VPE: Remove stray unlock_kernel. Signed-off-by: Ralf Baechle Reported-by: Josip Rodin diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c index 03092ab..6047752 100644 --- a/arch/mips/kernel/vpe.c +++ b/arch/mips/kernel/vpe.c @@ -1116,8 +1116,6 @@ static int vpe_open(struct inode *inode, struct file *filp) v->shared_ptr = NULL; v->__start = 0; - unlock_kernel(); - return 0; } -- cgit v0.10.2 From 80b8585b07feede94a742c4cdb80ab607a8813b3 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Sat, 10 Oct 2009 19:19:49 +0800 Subject: MIPS: 64-bit: Fix o32 lookup_dcookie syscall An o32 aplication passes a 64-bit value in a pair of registers; a 64-bit kernel expects a 64-bit argument in a single register. Signed-off-by: Chen Jie Signed-off-by: Hu Hongbing Signed-off-by: Wu Zhangjin Signed-off-by: Ralf Baechle diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c index 6242bc6..b77fefa 100644 --- a/arch/mips/kernel/linux32.c +++ b/arch/mips/kernel/linux32.c @@ -428,3 +428,9 @@ _sys32_clone(nabi_no_regargs struct pt_regs regs) return do_fork(clone_flags, newsp, ®s, 0, parent_tidptr, child_tidptr); } + +asmlinkage long sys32_lookup_dcookie(u32 a0, u32 a1, char __user *buf, + size_t len) +{ + return sys_lookup_dcookie(merge_64(a0, a1), buf, len); +} diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index 9bbf977..ba0dde6 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -450,7 +450,7 @@ sys_call_table: PTR sys_io_submit PTR sys_io_cancel /* 4245 */ PTR sys_exit_group - PTR sys_lookup_dcookie + PTR sys32_lookup_dcookie PTR sys_epoll_create PTR sys_epoll_ctl PTR sys_epoll_wait /* 4250 */ -- cgit v0.10.2 From c49e38c1a5e1c814f07365e7a5773801e20e26b5 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Sat, 10 Oct 2009 23:26:35 +0800 Subject: MIPS: Add IRQF_TIMER flag for timer interrupts As the commit 3ee4c147 shows, we need to "Add IRQF_TIMER flag for timer interrupts", Atsushi Nemoto have reported that some other timer interrupts should be considered, Here it is. Acked-by: Thomas Gleixner Acked-by: Rafael J. Wysocki Signed-off-by: Wu Zhangjin Signed-off-by: Ralf Baechle diff --git a/arch/mips/kernel/cevt-bcm1480.c b/arch/mips/kernel/cevt-bcm1480.c index e02f79b..bfea327 100644 --- a/arch/mips/kernel/cevt-bcm1480.c +++ b/arch/mips/kernel/cevt-bcm1480.c @@ -144,7 +144,7 @@ void __cpuinit sb1480_clockevent_init(void) bcm1480_unmask_irq(cpu, irq); action->handler = sibyte_counter_handler; - action->flags = IRQF_DISABLED | IRQF_PERCPU; + action->flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_TIMER; action->name = name; action->dev_id = cd; diff --git a/arch/mips/kernel/cevt-ds1287.c b/arch/mips/kernel/cevt-ds1287.c index 6996da4..00a4da2 100644 --- a/arch/mips/kernel/cevt-ds1287.c +++ b/arch/mips/kernel/cevt-ds1287.c @@ -107,7 +107,7 @@ static irqreturn_t ds1287_interrupt(int irq, void *dev_id) static struct irqaction ds1287_irqaction = { .handler = ds1287_interrupt, - .flags = IRQF_DISABLED | IRQF_PERCPU, + .flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_TIMER, .name = "ds1287", }; diff --git a/arch/mips/kernel/cevt-sb1250.c b/arch/mips/kernel/cevt-sb1250.c index ac5903d..da78eea 100644 --- a/arch/mips/kernel/cevt-sb1250.c +++ b/arch/mips/kernel/cevt-sb1250.c @@ -143,7 +143,7 @@ void __cpuinit sb1250_clockevent_init(void) sb1250_unmask_irq(cpu, irq); action->handler = sibyte_counter_handler; - action->flags = IRQF_DISABLED | IRQF_PERCPU; + action->flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_TIMER; action->name = name; action->dev_id = cd; diff --git a/arch/mips/kernel/cevt-txx9.c b/arch/mips/kernel/cevt-txx9.c index 0037f21..218ee6b 100644 --- a/arch/mips/kernel/cevt-txx9.c +++ b/arch/mips/kernel/cevt-txx9.c @@ -146,7 +146,7 @@ static irqreturn_t txx9tmr_interrupt(int irq, void *dev_id) static struct irqaction txx9tmr_irq = { .handler = txx9tmr_interrupt, - .flags = IRQF_DISABLED | IRQF_PERCPU, + .flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_TIMER, .name = "txx9tmr", .dev_id = &txx9_clock_event_device, }; diff --git a/arch/mips/nxp/pnx8550/common/int.c b/arch/mips/nxp/pnx8550/common/int.c index f080f11..7aca7d5 100644 --- a/arch/mips/nxp/pnx8550/common/int.c +++ b/arch/mips/nxp/pnx8550/common/int.c @@ -172,7 +172,7 @@ static struct irqaction gic_action = { static struct irqaction timer_action = { .handler = no_action, - .flags = IRQF_DISABLED, + .flags = IRQF_DISABLED | IRQF_TIMER, .name = "Timer", }; diff --git a/arch/mips/nxp/pnx8550/common/time.c b/arch/mips/nxp/pnx8550/common/time.c index d987a89..8836c62 100644 --- a/arch/mips/nxp/pnx8550/common/time.c +++ b/arch/mips/nxp/pnx8550/common/time.c @@ -72,7 +72,7 @@ static irqreturn_t monotonic_interrupt(int irq, void *dev_id) static struct irqaction monotonic_irqaction = { .handler = monotonic_interrupt, - .flags = IRQF_DISABLED, + .flags = IRQF_DISABLED | IRQF_TIMER, .name = "Monotonic timer", }; -- cgit v0.10.2 From a2e62f3a852e1e8187853291f5ee09ad4c881fcc Mon Sep 17 00:00:00 2001 From: Ralf Roesch Date: Wed, 16 Sep 2009 08:01:20 +0200 Subject: MIPS: TXx9: Fix error handling / Fix for noenexisting gpio_remove. Error was introduced by commit 0385d1f3d394c6814be0b165c153fc3fc254469a. Signed-off-by: Ralf Roesch Signed-off-by: Ralf Baechle diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index c860810..dfe4720 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -817,7 +817,8 @@ void __init txx9_iocled_init(unsigned long baseaddr, out_pdev: platform_device_put(pdev); out_gpio: - gpio_remove(&iocled->chip); + if (gpiochip_remove(&iocled->chip)) + return; out_unmap: iounmap(iocled->mmioaddr); out_free: -- cgit v0.10.2 From e85d59df13cf5cce08becb3fd261048e6d870c0d Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 31 Aug 2009 20:27:39 +0200 Subject: MIPS: BCM63xx: Fix soft-reset lockup on BCM6345 This patch fixes a lockup on BCM6345 where setting the PLL soft reset bit will also lock the other blocks including UART. Instead of setting only the PLL soft reset bit in the software reset register, set this bit but do not touch the others. Signed-off-by: Florian Fainelli Signed-off-by: Ralf Baechle diff --git a/arch/mips/bcm63xx/setup.c b/arch/mips/bcm63xx/setup.c index b18a0ca..d005659 100644 --- a/arch/mips/bcm63xx/setup.c +++ b/arch/mips/bcm63xx/setup.c @@ -75,7 +75,9 @@ void bcm63xx_machine_reboot(void) bcm6348_a1_reboot(); printk(KERN_INFO "triggering watchdog soft-reset...\n"); - bcm_perf_writel(SYS_PLL_SOFT_RESET, PERF_SYS_PLL_CTL_REG); + reg = bcm_perf_readl(PERF_SYS_PLL_CTL_REG); + reg |= SYS_PLL_SOFT_RESET; + bcm_perf_writel(reg, PERF_SYS_PLL_CTL_REG); while (1) ; } -- cgit v0.10.2 From e85843a1e1974167878e6124a91a06036c3b849d Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 17 Aug 2009 00:28:24 +0200 Subject: MIPS: AU1000: Fix build failure for db1x00 configured for Au1100 SoC This patch fixes the following warning, which becomes an error due to -Werror to be turned on: CC arch/mips/alchemy/common/gpiolib-au1000.o cc1: warnings being treated as errors arch/mips/alchemy/common/gpiolib-au1000.c: In function 'au1100_gpio2_to_irq': /home/florian/dev/kernel/linux-queue/arch/mips/include/asm/mach-au1x00/gpio-au1000.h:107: warning: control reaches end of non-void function Signed-off-by: Florian Fainelli Signed-off-by: Ralf Baechle diff --git a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h index feea001..91595fa 100644 --- a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h +++ b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h @@ -104,6 +104,8 @@ static inline int au1100_gpio2_to_irq(int gpio) if ((gpio >= 8) && (gpio <= 15)) return MAKE_IRQ(0, 29); /* shared GPIO208_215 */ + + return -ENXIO; } #ifdef CONFIG_SOC_AU1100 -- cgit v0.10.2 From 6c1e7a5ad9ac40c9bf45381409dc16207b6ffceb Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 10 Aug 2009 21:42:54 +0200 Subject: MIPS: BCM63xx: Make bcm63xx_uart_register an initfunc This patch removes the calls to bcm63xx_uart_register in board_bcm963xx.c and make bcm63xx_uart_register an initfunc. Allows us to remove bcm63xx_dev_uart.h which was there to make checkpatch.pl happy. Signed-off-by: Florian Fainelli Signed-off-by: Ralf Baechle diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c index 78e155d..05a35cf 100644 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c @@ -24,7 +24,6 @@ #include #include #include -#include #include #define PFX "board_bcm963xx: " @@ -794,8 +793,6 @@ int __init board_register_devices(void) { u32 val; - bcm63xx_uart_register(); - if (board.has_pccard) bcm63xx_pcmcia_register(); diff --git a/arch/mips/bcm63xx/dev-uart.c b/arch/mips/bcm63xx/dev-uart.c index 5f3d89c..b051946 100644 --- a/arch/mips/bcm63xx/dev-uart.c +++ b/arch/mips/bcm63xx/dev-uart.c @@ -10,7 +10,6 @@ #include #include #include -#include static struct resource uart_resources[] = { { @@ -39,3 +38,4 @@ int __init bcm63xx_uart_register(void) uart_resources[1].start = bcm63xx_get_irq_number(IRQ_UART0); return platform_device_register(&bcm63xx_uart_device); } +arch_initcall(bcm63xx_uart_register); diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_uart.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_uart.h deleted file mode 100644 index bf348f5..0000000 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_uart.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef BCM63XX_DEV_UART_H_ -#define BCM63XX_DEV_UART_H_ - -int bcm63xx_uart_register(void); - -#endif /* BCM63XX_DEV_UART_H_ */ -- cgit v0.10.2 From 2cfac7f7f2e6d11bcba105b3d6ba4d96ba5ad349 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 10 Aug 2009 21:42:59 +0200 Subject: MIPS: BCM63xx: Prepare for watchdog support This patch prepares the board code to register a bcm63xx_wdt platform_device that we are going to use in a subsequent patch. Signed-off-by: Florian Fainelli Signed-off-by: Ralf Baechle diff --git a/arch/mips/bcm63xx/Makefile b/arch/mips/bcm63xx/Makefile index c146d1e..00064b6 100644 --- a/arch/mips/bcm63xx/Makefile +++ b/arch/mips/bcm63xx/Makefile @@ -1,5 +1,5 @@ obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \ - dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o + dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-y += boards/ diff --git a/arch/mips/bcm63xx/dev-wdt.c b/arch/mips/bcm63xx/dev-wdt.c new file mode 100644 index 0000000..3e6c716 --- /dev/null +++ b/arch/mips/bcm63xx/dev-wdt.c @@ -0,0 +1,37 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Florian Fainelli + */ + +#include +#include +#include +#include + +static struct resource wdt_resources[] = { + { + .start = -1, /* filled at runtime */ + .end = -1, /* filled at runtime */ + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device bcm63xx_wdt_device = { + .name = "bcm63xx-wdt", + .id = 0, + .num_resources = ARRAY_SIZE(wdt_resources), + .resource = wdt_resources, +}; + +int __init bcm63xx_wdt_register(void) +{ + wdt_resources[0].start = bcm63xx_regset_address(RSET_WDT); + wdt_resources[0].end = wdt_resources[0].start; + wdt_resources[0].end += RSET_WDT_SIZE - 1; + + return platform_device_register(&bcm63xx_wdt_device); +} +arch_initcall(bcm63xx_wdt_register); -- cgit v0.10.2 From 72838a170372d6bb44bcb04a81aa2c83312cfbc0 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Tue, 4 Aug 2009 23:09:36 +0200 Subject: MIPS: AR7: register watchdog device only if enabled in hw configuration This patch checks if the watchdog enable bit is set in the DCL register meaning that the hardware watchdog actually works and if so, register the ar7_wdt platform_device. Signed-off-by: Florian Fainelli Signed-off-by: Ralf Baechle diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c index e2278c0..835f3f0 100644 --- a/arch/mips/ar7/platform.c +++ b/arch/mips/ar7/platform.c @@ -503,6 +503,7 @@ static int __init ar7_register_devices(void) { u16 chip_id; int res; + u32 *bootcr, val; #ifdef CONFIG_SERIAL_8250 static struct uart_port uart_port[2]; @@ -595,7 +596,13 @@ static int __init ar7_register_devices(void) ar7_wdt_res.end = ar7_wdt_res.start + 0x20; - res = platform_device_register(&ar7_wdt); + bootcr = (u32 *)ioremap_nocache(AR7_REGS_DCL, 4); + val = *bootcr; + iounmap(bootcr); + + /* Register watchdog only if enabled in hardware */ + if (val & AR7_WDT_HW_ENA) + res = platform_device_register(&ar7_wdt); return res; } diff --git a/arch/mips/include/asm/mach-ar7/ar7.h b/arch/mips/include/asm/mach-ar7/ar7.h index de71694..21cbbc7 100644 --- a/arch/mips/include/asm/mach-ar7/ar7.h +++ b/arch/mips/include/asm/mach-ar7/ar7.h @@ -78,6 +78,9 @@ #define AR7_REF_CLOCK 25000000 #define AR7_XTAL_CLOCK 24000000 +/* DCL */ +#define AR7_WDT_HW_ENA 0x10 + struct plat_cpmac_data { int reset_bit; int power_bit; -- cgit v0.10.2 From 39d2211d20518677511043d7ee16bbca6d0c5070 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 12 Oct 2009 02:23:48 +0200 Subject: MIPS: MTX-1: Fix build if CONFIG_PCI is disabled. Signed-off-by: Ralf Baechle diff --git a/arch/mips/alchemy/mtx-1/board_setup.c b/arch/mips/alchemy/mtx-1/board_setup.c index cc32c69..45b61c9 100644 --- a/arch/mips/alchemy/mtx-1/board_setup.c +++ b/arch/mips/alchemy/mtx-1/board_setup.c @@ -69,6 +69,7 @@ void __init board_setup(void) #else au_writel(0xf, Au1500_PCI_CFG); #endif + board_pci_idsel = mtx1_pci_idsel; #endif /* Initialize sys_pinfunc */ @@ -85,8 +86,6 @@ void __init board_setup(void) alchemy_gpio_direction_output(211, 1); /* green on */ alchemy_gpio_direction_output(212, 0); /* red off */ - board_pci_idsel = mtx1_pci_idsel; - printk(KERN_INFO "4G Systems MTX-1 Board\n"); } -- cgit v0.10.2 From 0f334a3e8c3586f81286345eb077ed32b375e8d6 Mon Sep 17 00:00:00 2001 From: Kevin Cernekee Date: Mon, 7 Sep 2009 11:11:31 -0700 Subject: MIPS: Fix machine check exception in kmap_coherent() On an SMP system with cache aliases, the following sequence of events may happen: 1) copy_user_highpage() runs on CPU0, invoking kmap_coherent() to create a temporary mapping in the fixmap region 2) copy_page() starts on CPU0 3) CPU1 sends CPU0 an IPI asking CPU0 to run local_r4k_flush_cache_page() 4) CPU0 takes the interrupt, interrupting copy_page() 5) local_r4k_flush_cache_page() on CPU0 calls kmap_coherent() again 6) The second invocation of kmap_coherent() on CPU0 tries to use the same fixmap virtual address that was being used by copy_user_highpage() 7) CPU0 throws a machine check exception for the TLB address conflict Fixed by creating an extra set of fixmap entries for use in interrupt handlers. This prevents fixmap VA conflicts between copy_user_highpage() running in user context, and local_r4k_flush_cache_page() invoked from an SMP IPI. Signed-off-by: Kevin Cernekee Signed-off-by: Ralf Baechle diff --git a/arch/mips/include/asm/fixmap.h b/arch/mips/include/asm/fixmap.h index efeddc8..0b89b83 100644 --- a/arch/mips/include/asm/fixmap.h +++ b/arch/mips/include/asm/fixmap.h @@ -48,9 +48,9 @@ enum fixed_addresses { #define FIX_N_COLOURS 8 FIX_CMAP_BEGIN, #ifdef CONFIG_MIPS_MT_SMTC - FIX_CMAP_END = FIX_CMAP_BEGIN + (FIX_N_COLOURS * NR_CPUS), + FIX_CMAP_END = FIX_CMAP_BEGIN + (FIX_N_COLOURS * NR_CPUS * 2), #else - FIX_CMAP_END = FIX_CMAP_BEGIN + FIX_N_COLOURS, + FIX_CMAP_END = FIX_CMAP_BEGIN + (FIX_N_COLOURS * 2), #endif #ifdef CONFIG_HIGHMEM /* reserved pte's for temporary kernel mappings */ diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index 15aa190..8d1f4f3 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include @@ -132,7 +133,10 @@ void *kmap_coherent(struct page *page, unsigned long addr) inc_preempt_count(); idx = (addr >> PAGE_SHIFT) & (FIX_N_COLOURS - 1); #ifdef CONFIG_MIPS_MT_SMTC - idx += FIX_N_COLOURS * smp_processor_id(); + idx += FIX_N_COLOURS * smp_processor_id() + + (in_interrupt() ? (FIX_N_COLOURS * NR_CPUS) : 0); +#else + idx += in_interrupt() ? FIX_N_COLOURS : 0; #endif vaddr = __fix_to_virt(FIX_CMAP_END - idx); pte = mk_pte(page, PAGE_KERNEL); -- cgit v0.10.2 From accfd35a4e82148ff3d6e1946c1786e73fb408fd Mon Sep 17 00:00:00 2001 From: Chris Dearman Date: Fri, 10 Jul 2009 01:53:54 -0700 Subject: MIPS: MTI: Fix accesses to device registers on MIPS boards This fixes the remaining problems introduced by f197465384bf7ef1af184c2ed1a4e268911a91e3 (incorrect access length & byteswapping in bigendian mode) Signed-off-by: Chris Dearman Signed-off-by: Ralf Baechle diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c index 3e0a9b3..e568d0d 100644 --- a/arch/mips/mti-malta/malta-int.c +++ b/arch/mips/mti-malta/malta-int.c @@ -87,7 +87,7 @@ static inline int mips_pcibios_iack(void) dummy = BONITO_PCIMAP_CFG; iob(); /* sync */ - irq = readl((u32 *)_pcictrl_bonito_pcicfg); + irq = __raw_readl((u32 *)_pcictrl_bonito_pcicfg); iob(); /* sync */ irq &= 0xff; BONITO_PCIMAP_CFG = 0; -- cgit v0.10.2 From c70887555143fdede9595df4c7a598676922f107 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 12 Oct 2009 22:30:06 +0200 Subject: MIPS: Kconfig: Fix duplicate default value for MIPS_L1_CACHE_SHIFT. Signed-off-by: Ralf Baechle diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 705a7a9..7159495 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1012,9 +1012,8 @@ config BOOT_ELF32 config MIPS_L1_CACHE_SHIFT int - default "4" if MACH_DECSTATION || MIKROTIK_RB532 + default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM || CPU_CAVIUM_OCTEON - default "4" if PMC_MSP4200_EVAL default "5" config HAVE_STD_PC_SERIAL_PORT -- cgit v0.10.2 From a951f2829adba3f2945172b740528fce4366907d Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 12 Oct 2009 22:54:47 +0200 Subject: MIPS: Malta: Enable PCI 2.1 compatibility in PIIX4 Based on original patch by Chris Dearman . Signed-off-by: Ralf Baechle diff --git a/arch/mips/mti-malta/malta-pci.c b/arch/mips/mti-malta/malta-pci.c index b974319..efdb4f6 100644 --- a/arch/mips/mti-malta/malta-pci.c +++ b/arch/mips/mti-malta/malta-pci.c @@ -241,3 +241,16 @@ void __init mips_pcibios_init(void) register_pci_controller(controller); } + +/* Enable PCI 2.1 compatibility in PIIX4 */ +static void __init quirk_dlcsetup(struct pci_dev *dev) +{ + u8 odlc, ndlc; + (void) pci_read_config_byte(dev, 0x82, &odlc); + /* Enable passive releases and delayed transaction */ + ndlc = odlc | 7; + (void) pci_write_config_byte(dev, 0x82, ndlc); +} + +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_0, + quirk_dlcsetup); -- cgit v0.10.2 From a4e7cac18f074fa55142bc86cc35a74f3c6ea615 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 12 Oct 2009 23:20:20 +0200 Subject: MIPS: 1004K: Enable SPRAM support. Signed-off-by: Ralf Baechle diff --git a/arch/mips/kernel/spram.c b/arch/mips/kernel/spram.c index 6ddb507..71b4737 100644 --- a/arch/mips/kernel/spram.c +++ b/arch/mips/kernel/spram.c @@ -208,6 +208,7 @@ __cpuinit void spram_config(void) case CPU_24K: case CPU_34K: case CPU_74K: + case CPU_1004K: config0 = read_c0_config(); /* FIXME: addresses are Malta specific */ if (config0 & (1<<24)) { -- cgit v0.10.2 From a074f0e89faa8989bdbd6110785d2aafe7df5285 Mon Sep 17 00:00:00 2001 From: Chris Dearman Date: Fri, 10 Jul 2009 01:51:27 -0700 Subject: MIPS: SPRAM: Clean up support code a little Signed-off-by: Chris Dearman Signed-off-by: Ralf Baechle diff --git a/arch/mips/include/asm/spram.h b/arch/mips/include/asm/spram.h new file mode 100644 index 0000000..0b89006 --- /dev/null +++ b/arch/mips/include/asm/spram.h @@ -0,0 +1,10 @@ +#ifndef _MIPS_SPRAM_H +#define _MIPS_SPRAM_H + +#ifdef CONFIG_CPU_MIPSR2 +extern __init void spram_config(void); +#else +static inline void spram_config(void) { }; +#endif /* CONFIG_CPU_MIPSR2 */ + +#endif /* _MIPS_SPRAM_H */ diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index f709657..7a51866 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -23,7 +23,7 @@ #include #include #include - +#include /* * Not all of the MIPS CPUs have the "wait" instruction available. Moreover, * the implementation of the "wait" feature differs between CPU families. This @@ -711,12 +711,6 @@ static void __cpuinit decode_configs(struct cpuinfo_mips *c) mips_probe_watch_registers(c); } -#ifdef CONFIG_CPU_MIPSR2 -extern void spram_config(void); -#else -static inline void spram_config(void) {} -#endif - static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu) { decode_configs(c); diff --git a/arch/mips/kernel/spram.c b/arch/mips/kernel/spram.c index 71b4737..1821d12 100644 --- a/arch/mips/kernel/spram.c +++ b/arch/mips/kernel/spram.c @@ -13,7 +13,6 @@ #include #include -#include #include #include #include @@ -198,8 +197,7 @@ static __cpuinit void probe_spram(char *type, offset += 2 * SPRAM_TAG_STRIDE; } } - -__cpuinit void spram_config(void) +void __cpuinit spram_config(void) { struct cpuinfo_mips *c = ¤t_cpu_data; unsigned int config0; -- cgit v0.10.2 From cea2be444380fc1bf665cd023ed84be7e0872d28 Mon Sep 17 00:00:00 2001 From: Nigel Stephens Date: Mon, 12 Oct 2009 14:57:18 -0700 Subject: MIPS: Fix abs.[sd] and neg.[sd] emulation for NaN operands This patch ensures that the sign bit is always updated for NaN operands. Signed-off-by: Chris Dearman Signed-off-by: Ralf Baechle diff --git a/arch/mips/math-emu/dp_simple.c b/arch/mips/math-emu/dp_simple.c index 1c555e6..d9ae1db 100644 --- a/arch/mips/math-emu/dp_simple.c +++ b/arch/mips/math-emu/dp_simple.c @@ -62,8 +62,6 @@ ieee754dp ieee754dp_neg(ieee754dp x) return ieee754dp_nanxcpt(y, "neg"); } - if (ieee754dp_isnan(x)) /* but not infinity */ - return ieee754dp_nanxcpt(x, "neg", x); return x; } @@ -76,15 +74,12 @@ ieee754dp ieee754dp_abs(ieee754dp x) CLEARCX; FLUSHXDP; + /* Clear sign ALWAYS, irrespective of NaN */ + DPSIGN(x) = 0; + if (xc == IEEE754_CLASS_SNAN) { - SETCX(IEEE754_INVALID_OPERATION); - return ieee754dp_nanxcpt(ieee754dp_indef(), "neg"); + return ieee754dp_nanxcpt(ieee754dp_indef(), "abs"); } - if (ieee754dp_isnan(x)) /* but not infinity */ - return ieee754dp_nanxcpt(x, "abs", x); - - /* quick fix up */ - DPSIGN(x) = 0; return x; } diff --git a/arch/mips/math-emu/sp_simple.c b/arch/mips/math-emu/sp_simple.c index 770f0f4..3175477 100644 --- a/arch/mips/math-emu/sp_simple.c +++ b/arch/mips/math-emu/sp_simple.c @@ -62,8 +62,6 @@ ieee754sp ieee754sp_neg(ieee754sp x) return ieee754sp_nanxcpt(y, "neg"); } - if (ieee754sp_isnan(x)) /* but not infinity */ - return ieee754sp_nanxcpt(x, "neg", x); return x; } @@ -76,15 +74,12 @@ ieee754sp ieee754sp_abs(ieee754sp x) CLEARCX; FLUSHXSP; + /* Clear sign ALWAYS, irrespective of NaN */ + SPSIGN(x) = 0; + if (xc == IEEE754_CLASS_SNAN) { - SETCX(IEEE754_INVALID_OPERATION); return ieee754sp_nanxcpt(ieee754sp_indef(), "abs"); } - if (ieee754sp_isnan(x)) /* but not infinity */ - return ieee754sp_nanxcpt(x, "abs", x); - - /* quick fix up */ - SPSIGN(x) = 0; return x; } -- cgit v0.10.2 From 2ee0a42961c942c6a2fb70700ef4e25c0acf5fca Mon Sep 17 00:00:00 2001 From: Chris Dearman Date: Fri, 10 Jul 2009 02:06:38 -0700 Subject: MIPS: CMP: Fix memory barriers for correct operation of amon_cpu_start Signed-off-by: Chris Dearman (chris@mips.com) Signed-off-by: Ralf Baechle diff --git a/arch/mips/mti-malta/malta-amon.c b/arch/mips/mti-malta/malta-amon.c index df9e526..469d9b0 100644 --- a/arch/mips/mti-malta/malta-amon.c +++ b/arch/mips/mti-malta/malta-amon.c @@ -70,11 +70,12 @@ void amon_cpu_start(int cpu, launch->sp = sp; launch->a0 = a0; - /* Make sure target sees parameters before the go bit */ - smp_mb(); - + smp_wmb(); /* Target must see parameters before go */ launch->flags |= LAUNCH_FGO; + smp_wmb(); /* Target must see go before we poll */ + while ((launch->flags & LAUNCH_FGONE) == 0) ; + smp_rmb(); /* Target will be updating flags soon */ pr_debug("launch: cpu%d gone!\n", cpu); } -- cgit v0.10.2 From 7098f748283b4c056cca9c284c476b03f004ca12 Mon Sep 17 00:00:00 2001 From: Chris Dearman Date: Fri, 10 Jul 2009 01:54:09 -0700 Subject: MIPS: GIC: Random fixes and enhancements. Signed-off-by: Chris Dearman Signed-off-by: Ralf Baechle diff --git a/arch/mips/include/asm/gcmpregs.h b/arch/mips/include/asm/gcmpregs.h index 36fd969..c0cf76a 100644 --- a/arch/mips/include/asm/gcmpregs.h +++ b/arch/mips/include/asm/gcmpregs.h @@ -19,15 +19,20 @@ #define GCMP_GDB_OFS 0x8000 /* Global Debug Block */ /* Offsets to individual GCMP registers from GCMP base */ -#define GCMPOFS(block, tag, reg) (GCMP_##block##_OFS + GCMP_##tag##_##reg##_OFS) +#define GCMPOFS(block, tag, reg) \ + (GCMP_##block##_OFS + GCMP_##tag##_##reg##_OFS) +#define GCMPOFSn(block, tag, reg, n) \ + (GCMP_##block##_OFS + GCMP_##tag##_##reg##_OFS(n)) #define GCMPGCBOFS(reg) GCMPOFS(GCB, GCB, reg) +#define GCMPGCBOFSn(reg, n) GCMPOFSn(GCB, GCB, reg, n) #define GCMPCLCBOFS(reg) GCMPOFS(CLCB, CCB, reg) #define GCMPCOCBOFS(reg) GCMPOFS(COCB, CCB, reg) #define GCMPGDBOFS(reg) GCMPOFS(GDB, GDB, reg) /* GCMP register access */ #define GCMPGCB(reg) REGP(_gcmp_base, GCMPGCBOFS(reg)) +#define GCMPGCBn(reg, n) REGP(_gcmp_base, GCMPGCBOFSn(reg, n)) #define GCMPCLCB(reg) REGP(_gcmp_base, GCMPCLCBOFS(reg)) #define GCMPCOCB(reg) REGP(_gcmp_base, GCMPCOCBOFS(reg)) #define GCMPGDB(reg) REGP(_gcmp_base, GCMPGDBOFS(reg)) @@ -49,10 +54,10 @@ #define GCMP_GCB_GCMPB_GCMPBASE_MSK GCMPGCBMSK(GCMPB_GCMPBASE, 17) #define GCMP_GCB_GCMPB_CMDEFTGT_SHF 0 #define GCMP_GCB_GCMPB_CMDEFTGT_MSK GCMPGCBMSK(GCMPB_CMDEFTGT, 2) -#define GCMP_GCB_GCMPB_CMDEFTGT_MEM 0 -#define GCMP_GCB_GCMPB_CMDEFTGT_MEM1 1 -#define GCMP_GCB_GCMPB_CMDEFTGT_IOCU1 2 -#define GCMP_GCB_GCMPB_CMDEFTGT_IOCU2 3 +#define GCMP_GCB_GCMPB_CMDEFTGT_DISABLED 0 +#define GCMP_GCB_GCMPB_CMDEFTGT_MEM 1 +#define GCMP_GCB_GCMPB_CMDEFTGT_IOCU1 2 +#define GCMP_GCB_GCMPB_CMDEFTGT_IOCU2 3 #define GCMP_GCB_CCMC_OFS 0x0010 /* Global CM Control */ #define GCMP_GCB_GCSRAP_OFS 0x0020 /* Global CSR Access Privilege */ #define GCMP_GCB_GCSRAP_CMACCESS_SHF 0 @@ -115,5 +120,6 @@ #define GCMP_CCB_DBGGROUP_OFS 0x0100 /* DebugBreak Group */ extern int __init gcmp_probe(unsigned long, unsigned long); - +extern int __init gcmp_niocu(void); +extern void __init gcmp_setregion(int, unsigned long, unsigned long, int); #endif /* _ASM_GCMPREGS_H */ diff --git a/arch/mips/include/asm/gic.h b/arch/mips/include/asm/gic.h index a8f5734..9b9436a 100644 --- a/arch/mips/include/asm/gic.h +++ b/arch/mips/include/asm/gic.h @@ -12,7 +12,6 @@ #define _ASM_GICREGS_H #undef GICISBYTELITTLEENDIAN -#define GICISWORDLITTLEENDIAN /* Constants */ #define GIC_POL_POS 1 @@ -20,11 +19,7 @@ #define GIC_TRIG_EDGE 1 #define GIC_TRIG_LEVEL 0 -#ifdef CONFIG_SMP #define GIC_NUM_INTRS (24 + NR_CPUS * 2) -#else -#define GIC_NUM_INTRS 32 -#endif #define MSK(n) ((1 << (n)) - 1) #define REG32(addr) (*(volatile unsigned int *) (addr)) @@ -70,13 +65,13 @@ #define USM_VISIBLE_SECTION_SIZE 0x10000 /* Register Map for Shared Section */ -#if defined(CONFIG_CPU_LITTLE_ENDIAN) || defined(GICISWORDLITTLEENDIAN) #define GIC_SH_CONFIG_OFS 0x0000 /* Shared Global Counter */ #define GIC_SH_COUNTER_31_00_OFS 0x0010 #define GIC_SH_COUNTER_63_32_OFS 0x0014 +#define GIC_SH_REVISIONID_OFS 0x0020 /* Interrupt Polarity */ #define GIC_SH_POL_31_0_OFS 0x0100 @@ -164,24 +159,31 @@ (GIC_SH_INTR_MAP_TO_VPE_BASE_OFS + (32 * (intr)) + (((vpe) / 32) * 4)) #define GIC_SH_MAP_TO_VPE_REG_BIT(vpe) (1 << ((vpe) % 32)) +/* Convert an interrupt number to a byte offset/bit for multi-word registers */ +#define GIC_INTR_OFS(intr) (((intr) / 32)*4) +#define GIC_INTR_BIT(intr) ((intr) % 32) + /* Polarity : Reset Value is always 0 */ #define GIC_SH_SET_POLARITY_OFS 0x0100 #define GIC_SET_POLARITY(intr, pol) \ - GICBIS(GIC_REG_ADDR(SHARED, GIC_SH_SET_POLARITY_OFS + (((intr) / 32) * 4)), (pol) << ((intr) % 32)) + GICBIS(GIC_REG_ADDR(SHARED, GIC_SH_SET_POLARITY_OFS + \ + GIC_INTR_OFS(intr)), (pol) << GIC_INTR_BIT(intr)) /* Triggering : Reset Value is always 0 */ #define GIC_SH_SET_TRIGGER_OFS 0x0180 #define GIC_SET_TRIGGER(intr, trig) \ - GICBIS(GIC_REG_ADDR(SHARED, GIC_SH_SET_TRIGGER_OFS + (((intr) / 32) * 4)), (trig) << ((intr) % 32)) + GICBIS(GIC_REG_ADDR(SHARED, GIC_SH_SET_TRIGGER_OFS + \ + GIC_INTR_OFS(intr)), (trig) << GIC_INTR_BIT(intr)) /* Mask manipulation */ #define GIC_SH_SMASK_OFS 0x0380 -#define GIC_SET_INTR_MASK(intr, val) \ - GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_SMASK_OFS + (((intr) / 32) * 4)), ((val) << ((intr) % 32))) - +#define GIC_SET_INTR_MASK(intr) \ + GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_SMASK_OFS + \ + GIC_INTR_OFS(intr)), 1 << GIC_INTR_BIT(intr)) #define GIC_SH_RMASK_OFS 0x0300 -#define GIC_CLR_INTR_MASK(intr, val) \ - GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_RMASK_OFS + (((intr) / 32) * 4)), ((val) << ((intr) % 32))) +#define GIC_CLR_INTR_MASK(intr) \ + GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_RMASK_OFS + \ + GIC_INTR_OFS(intr)), 1 << GIC_INTR_BIT(intr)) /* Register Map for Local Section */ #define GIC_VPE_CTL_OFS 0x0000 @@ -219,161 +221,6 @@ #define GIC_UMV_SH_COUNTER_31_00_OFS 0x0000 #define GIC_UMV_SH_COUNTER_63_32_OFS 0x0004 -#else /* CONFIG_CPU_BIG_ENDIAN */ - -#define GIC_SH_CONFIG_OFS 0x0000 - -/* Shared Global Counter */ -#define GIC_SH_COUNTER_31_00_OFS 0x0014 -#define GIC_SH_COUNTER_63_32_OFS 0x0010 - -/* Interrupt Polarity */ -#define GIC_SH_POL_31_0_OFS 0x0104 -#define GIC_SH_POL_63_32_OFS 0x0100 -#define GIC_SH_POL_95_64_OFS 0x010c -#define GIC_SH_POL_127_96_OFS 0x0108 -#define GIC_SH_POL_159_128_OFS 0x0114 -#define GIC_SH_POL_191_160_OFS 0x0110 -#define GIC_SH_POL_223_192_OFS 0x011c -#define GIC_SH_POL_255_224_OFS 0x0118 - -/* Edge/Level Triggering */ -#define GIC_SH_TRIG_31_0_OFS 0x0184 -#define GIC_SH_TRIG_63_32_OFS 0x0180 -#define GIC_SH_TRIG_95_64_OFS 0x018c -#define GIC_SH_TRIG_127_96_OFS 0x0188 -#define GIC_SH_TRIG_159_128_OFS 0x0194 -#define GIC_SH_TRIG_191_160_OFS 0x0190 -#define GIC_SH_TRIG_223_192_OFS 0x019c -#define GIC_SH_TRIG_255_224_OFS 0x0198 - -/* Dual Edge Triggering */ -#define GIC_SH_DUAL_31_0_OFS 0x0204 -#define GIC_SH_DUAL_63_32_OFS 0x0200 -#define GIC_SH_DUAL_95_64_OFS 0x020c -#define GIC_SH_DUAL_127_96_OFS 0x0208 -#define GIC_SH_DUAL_159_128_OFS 0x0214 -#define GIC_SH_DUAL_191_160_OFS 0x0210 -#define GIC_SH_DUAL_223_192_OFS 0x021c -#define GIC_SH_DUAL_255_224_OFS 0x0218 - -/* Set/Clear corresponding bit in Edge Detect Register */ -#define GIC_SH_WEDGE_OFS 0x0280 - -/* Reset Mask - Disables Interrupt */ -#define GIC_SH_RMASK_31_0_OFS 0x0304 -#define GIC_SH_RMASK_63_32_OFS 0x0300 -#define GIC_SH_RMASK_95_64_OFS 0x030c -#define GIC_SH_RMASK_127_96_OFS 0x0308 -#define GIC_SH_RMASK_159_128_OFS 0x0314 -#define GIC_SH_RMASK_191_160_OFS 0x0310 -#define GIC_SH_RMASK_223_192_OFS 0x031c -#define GIC_SH_RMASK_255_224_OFS 0x0318 - -/* Set Mask (WO) - Enables Interrupt */ -#define GIC_SH_SMASK_31_0_OFS 0x0384 -#define GIC_SH_SMASK_63_32_OFS 0x0380 -#define GIC_SH_SMASK_95_64_OFS 0x038c -#define GIC_SH_SMASK_127_96_OFS 0x0388 -#define GIC_SH_SMASK_159_128_OFS 0x0394 -#define GIC_SH_SMASK_191_160_OFS 0x0390 -#define GIC_SH_SMASK_223_192_OFS 0x039c -#define GIC_SH_SMASK_255_224_OFS 0x0398 - -/* Global Interrupt Mask Register (RO) - Bit Set == Interrupt enabled */ -#define GIC_SH_MASK_31_0_OFS 0x0404 -#define GIC_SH_MASK_63_32_OFS 0x0400 -#define GIC_SH_MASK_95_64_OFS 0x040c -#define GIC_SH_MASK_127_96_OFS 0x0408 -#define GIC_SH_MASK_159_128_OFS 0x0414 -#define GIC_SH_MASK_191_160_OFS 0x0410 -#define GIC_SH_MASK_223_192_OFS 0x041c -#define GIC_SH_MASK_255_224_OFS 0x0418 - -/* Pending Global Interrupts (RO) */ -#define GIC_SH_PEND_31_0_OFS 0x0484 -#define GIC_SH_PEND_63_32_OFS 0x0480 -#define GIC_SH_PEND_95_64_OFS 0x048c -#define GIC_SH_PEND_127_96_OFS 0x0488 -#define GIC_SH_PEND_159_128_OFS 0x0494 -#define GIC_SH_PEND_191_160_OFS 0x0490 -#define GIC_SH_PEND_223_192_OFS 0x049c -#define GIC_SH_PEND_255_224_OFS 0x0498 - -#define GIC_SH_INTR_MAP_TO_PIN_BASE_OFS 0x0500 - -/* Maps Interrupt X to a Pin */ -#define GIC_SH_MAP_TO_PIN(intr) \ - (GIC_SH_INTR_MAP_TO_PIN_BASE_OFS + (4 * intr)) - -#define GIC_SH_INTR_MAP_TO_VPE_BASE_OFS 0x2004 - -/* - * Maps Interrupt X to a VPE. This is more complex than the LE case, as - * odd and even registers need to be transposed. It does work - trust me! - */ -#define GIC_SH_MAP_TO_VPE_REG_OFF(intr, vpe) \ - (GIC_SH_INTR_MAP_TO_VPE_BASE_OFS + (32 * (intr)) + \ - (((((vpe) / 32) ^ 1) - 1) * 4)) -#define GIC_SH_MAP_TO_VPE_REG_BIT(vpe) (1 << ((vpe) % 32)) - -/* Polarity */ -#define GIC_SH_SET_POLARITY_OFS 0x0100 -#define GIC_SET_POLARITY(intr, pol) \ - GICBIS(GIC_REG_ADDR(SHARED, GIC_SH_SET_POLARITY_OFS + 4 + (((((intr) / 32) ^ 1) - 1) * 4)), (pol) << ((intr) % 32)) - -/* Triggering */ -#define GIC_SH_SET_TRIGGER_OFS 0x0180 -#define GIC_SET_TRIGGER(intr, trig) \ - GICBIS(GIC_REG_ADDR(SHARED, GIC_SH_SET_TRIGGER_OFS + 4 + (((((intr) / 32) ^ 1) - 1) * 4)), (trig) << ((intr) % 32)) - -/* Mask manipulation */ -#define GIC_SH_SMASK_OFS 0x0380 -#define GIC_SET_INTR_MASK(intr, val) \ - GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_SMASK_OFS + 4 + (((((intr) / 32) ^ 1) - 1) * 4)), ((val) << ((intr) % 32))) - -#define GIC_SH_RMASK_OFS 0x0300 -#define GIC_CLR_INTR_MASK(intr, val) \ - GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_RMASK_OFS + 4 + (((((intr) / 32) ^ 1) - 1) * 4)), ((val) << ((intr) % 32))) - -/* Register Map for Local Section */ -#define GIC_VPE_CTL_OFS 0x0000 -#define GIC_VPE_PEND_OFS 0x0004 -#define GIC_VPE_MASK_OFS 0x0008 -#define GIC_VPE_RMASK_OFS 0x000c -#define GIC_VPE_SMASK_OFS 0x0010 -#define GIC_VPE_WD_MAP_OFS 0x0040 -#define GIC_VPE_COMPARE_MAP_OFS 0x0044 -#define GIC_VPE_TIMER_MAP_OFS 0x0048 -#define GIC_VPE_PERFCTR_MAP_OFS 0x0050 -#define GIC_VPE_SWINT0_MAP_OFS 0x0054 -#define GIC_VPE_SWINT1_MAP_OFS 0x0058 -#define GIC_VPE_OTHER_ADDR_OFS 0x0080 -#define GIC_VPE_WD_CONFIG0_OFS 0x0090 -#define GIC_VPE_WD_COUNT0_OFS 0x0094 -#define GIC_VPE_WD_INITIAL0_OFS 0x0098 -#define GIC_VPE_COMPARE_LO_OFS 0x00a4 -#define GIC_VPE_COMPARE_HI_OFS 0x00a0 - -#define GIC_VPE_EIC_SHADOW_SET_BASE 0x0100 -#define GIC_VPE_EIC_SS(intr) \ - (GIC_EIC_SHADOW_SET_BASE + (4 * intr)) - -#define GIC_VPE_EIC_VEC_BASE 0x0800 -#define GIC_VPE_EIC_VEC(intr) \ - (GIC_VPE_EIC_VEC_BASE + (4 * intr)) - -#define GIC_VPE_TENABLE_NMI_OFS 0x1000 -#define GIC_VPE_TENABLE_YQ_OFS 0x1004 -#define GIC_VPE_TENABLE_INT_31_0_OFS 0x1080 -#define GIC_VPE_TENABLE_INT_63_32_OFS 0x1084 - -/* User Mode Visible Section Register Map */ -#define GIC_UMV_SH_COUNTER_31_00_OFS 0x0004 -#define GIC_UMV_SH_COUNTER_63_32_OFS 0x0000 - -#endif /* !LE */ - /* Masks */ #define GIC_SH_CONFIG_COUNTSTOP_SHF 28 #define GIC_SH_CONFIG_COUNTSTOP_MSK (MSK(1) << GIC_SH_CONFIG_COUNTSTOP_SHF) @@ -473,12 +320,13 @@ struct gic_intrmask_regs { * in building ipi_map. */ struct gic_intr_map { - unsigned int intrnum; /* Ext Intr Num */ unsigned int cpunum; /* Directed to this CPU */ unsigned int pin; /* Directed to this Pin */ unsigned int polarity; /* Polarity : +/- */ unsigned int trigtype; /* Trigger : Edge/Levl */ - unsigned int ipiflag; /* Is used for IPI ? */ + unsigned int flags; /* Misc flags */ +#define GIC_FLAG_IPI 0x01 +#define GIC_FLAG_TRANSPARENT 0x02 }; extern void gic_init(unsigned long gic_base_addr, diff --git a/arch/mips/kernel/irq-gic.c b/arch/mips/kernel/irq-gic.c index d2072cd..b181f2f 100644 --- a/arch/mips/kernel/irq-gic.c +++ b/arch/mips/kernel/irq-gic.c @@ -14,38 +14,23 @@ static unsigned long _gic_base; -static unsigned int _irqbase, _mapsize, numvpes, numintrs; -static struct gic_intr_map *_intrmap; +static unsigned int _irqbase; +static unsigned int gic_irq_flags[GIC_NUM_INTRS]; +#define GIC_IRQ_FLAG_EDGE 0x0001 -static struct gic_pcpu_mask pcpu_masks[NR_CPUS]; +struct gic_pcpu_mask pcpu_masks[NR_CPUS]; static struct gic_pending_regs pending_regs[NR_CPUS]; static struct gic_intrmask_regs intrmask_regs[NR_CPUS]; -#define gic_wedgeb2bok 0 /* - * Can GIC handle b2b writes to wedge register? - */ -#if gic_wedgeb2bok == 0 -static DEFINE_SPINLOCK(gic_wedgeb2b_lock); -#endif - void gic_send_ipi(unsigned int intr) { -#if gic_wedgeb2bok == 0 - unsigned long flags; -#endif pr_debug("CPU%d: %s status %08x\n", smp_processor_id(), __func__, read_c0_status()); - if (!gic_wedgeb2bok) - spin_lock_irqsave(&gic_wedgeb2b_lock, flags); GICWRITE(GIC_REG(SHARED, GIC_SH_WEDGE), 0x80000000 | intr); - if (!gic_wedgeb2bok) { - (void) GIC_REG(SHARED, GIC_SH_CONFIG); - spin_unlock_irqrestore(&gic_wedgeb2b_lock, flags); - } } /* This is Malta specific and needs to be exported */ -static void vpe_local_setup(unsigned int numvpes) +static void __init vpe_local_setup(unsigned int numvpes) { int i; unsigned long timer_interrupt = 5, perf_interrupt = 5; @@ -105,44 +90,34 @@ unsigned int gic_get_int(void) static unsigned int gic_irq_startup(unsigned int irq) { - pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq); irq -= _irqbase; - GIC_SET_INTR_MASK(irq, 1); + pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq); + GIC_SET_INTR_MASK(irq); return 0; } static void gic_irq_ack(unsigned int irq) { -#if gic_wedgeb2bok == 0 - unsigned long flags; -#endif - pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq); irq -= _irqbase; - GIC_CLR_INTR_MASK(irq, 1); + pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq); + GIC_CLR_INTR_MASK(irq); - if (_intrmap[irq].trigtype == GIC_TRIG_EDGE) { - if (!gic_wedgeb2bok) - spin_lock_irqsave(&gic_wedgeb2b_lock, flags); + if (gic_irq_flags[irq] & GIC_IRQ_FLAG_EDGE) GICWRITE(GIC_REG(SHARED, GIC_SH_WEDGE), irq); - if (!gic_wedgeb2bok) { - (void) GIC_REG(SHARED, GIC_SH_CONFIG); - spin_unlock_irqrestore(&gic_wedgeb2b_lock, flags); - } - } } static void gic_mask_irq(unsigned int irq) { - pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq); irq -= _irqbase; - GIC_CLR_INTR_MASK(irq, 1); + pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq); + GIC_CLR_INTR_MASK(irq); } static void gic_unmask_irq(unsigned int irq) { - pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq); irq -= _irqbase; - GIC_SET_INTR_MASK(irq, 1); + pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq); + GIC_SET_INTR_MASK(irq); } #ifdef CONFIG_SMP @@ -155,9 +130,8 @@ static int gic_set_affinity(unsigned int irq, const struct cpumask *cpumask) unsigned long flags; int i; - pr_debug(KERN_DEBUG "%s called\n", __func__); irq -= _irqbase; - + pr_debug(KERN_DEBUG "%s(%d) called\n", __func__, irq); cpumask_and(&tmp, cpumask, cpu_online_mask); if (cpus_empty(tmp)) return -1; @@ -168,13 +142,6 @@ static int gic_set_affinity(unsigned int irq, const struct cpumask *cpumask) /* Re-route this IRQ */ GIC_SH_MAP_TO_VPE_SMASK(irq, first_cpu(tmp)); - /* - * FIXME: assumption that _intrmap is ordered and has no holes - */ - - /* Update the intr_map */ - _intrmap[irq].cpunum = first_cpu(tmp); - /* Update the pcpu_masks */ for (i = 0; i < NR_CPUS; i++) clear_bit(irq, pcpu_masks[i].pcpu_mask); @@ -201,8 +168,9 @@ static struct irq_chip gic_irq_controller = { #endif }; -static void __init setup_intr(unsigned int intr, unsigned int cpu, - unsigned int pin, unsigned int polarity, unsigned int trigtype) +static void __init gic_setup_intr(unsigned int intr, unsigned int cpu, + unsigned int pin, unsigned int polarity, unsigned int trigtype, + unsigned int flags) { /* Setup Intr to Pin mapping */ if (pin & GIC_MAP_TO_NMI_MSK) { @@ -227,38 +195,43 @@ static void __init setup_intr(unsigned int intr, unsigned int cpu, GIC_SET_TRIGGER(intr, trigtype); /* Init Intr Masks */ - GIC_SET_INTR_MASK(intr, 0); + GIC_CLR_INTR_MASK(intr); + /* Initialise per-cpu Interrupt software masks */ + if (flags & GIC_FLAG_IPI) + set_bit(intr, pcpu_masks[cpu].pcpu_mask); + if (flags & GIC_FLAG_TRANSPARENT) + GIC_SET_INTR_MASK(intr); + if (trigtype == GIC_TRIG_EDGE) + gic_irq_flags[intr] |= GIC_IRQ_FLAG_EDGE; } -static void __init gic_basic_init(void) +static void __init gic_basic_init(int numintrs, int numvpes, + struct gic_intr_map *intrmap, int mapsize) { unsigned int i, cpu; /* Setup defaults */ - for (i = 0; i < GIC_NUM_INTRS; i++) { + for (i = 0; i < numintrs; i++) { GIC_SET_POLARITY(i, GIC_POL_POS); GIC_SET_TRIGGER(i, GIC_TRIG_LEVEL); - GIC_SET_INTR_MASK(i, 0); + GIC_CLR_INTR_MASK(i); + if (i < GIC_NUM_INTRS) + gic_irq_flags[i] = 0; } /* Setup specifics */ - for (i = 0; i < _mapsize; i++) { - cpu = _intrmap[i].cpunum; + for (i = 0; i < mapsize; i++) { + cpu = intrmap[i].cpunum; if (cpu == X) continue; - - if (cpu == 0 && i != 0 && _intrmap[i].intrnum == 0 && - _intrmap[i].ipiflag == 0) + if (cpu == 0 && i != 0 && intrmap[i].flags == 0) continue; - - setup_intr(_intrmap[i].intrnum, - _intrmap[i].cpunum, - _intrmap[i].pin, - _intrmap[i].polarity, - _intrmap[i].trigtype); - /* Initialise per-cpu Interrupt software masks */ - if (_intrmap[i].ipiflag) - set_bit(_intrmap[i].intrnum, pcpu_masks[cpu].pcpu_mask); + gic_setup_intr(i, + intrmap[i].cpunum, + intrmap[i].pin, + intrmap[i].polarity, + intrmap[i].trigtype, + intrmap[i].flags); } vpe_local_setup(numvpes); @@ -273,12 +246,11 @@ void __init gic_init(unsigned long gic_base_addr, unsigned int irqbase) { unsigned int gicconfig; + int numvpes, numintrs; _gic_base = (unsigned long) ioremap_nocache(gic_base_addr, gic_addrspace_size); _irqbase = irqbase; - _intrmap = intr_map; - _mapsize = intr_map_size; GICREAD(GIC_REG(SHARED, GIC_SH_CONFIG), gicconfig); numintrs = (gicconfig & GIC_SH_CONFIG_NUMINTRS_MSK) >> @@ -290,5 +262,5 @@ void __init gic_init(unsigned long gic_base_addr, pr_debug("%s called\n", __func__); - gic_basic_init(); + gic_basic_init(numintrs, numvpes, intr_map, intr_map_size); } diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c index e568d0d..377a925 100644 --- a/arch/mips/mti-malta/malta-int.c +++ b/arch/mips/mti-malta/malta-int.c @@ -379,32 +379,32 @@ static msc_irqmap_t __initdata msc_eicirqmap[] = { static int __initdata msc_nr_eicirqs = ARRAY_SIZE(msc_eicirqmap); -#if defined(CONFIG_MIPS_MT_SMP) /* * This GIC specific tabular array defines the association between External * Interrupts and CPUs/Core Interrupts. The nature of the External * Interrupts is also defined here - polarity/trigger. */ + +#define GIC_CPU_NMI GIC_MAP_TO_NMI_MSK static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS] = { - { GIC_EXT_INTR(0), X, X, X, X, 0 }, - { GIC_EXT_INTR(1), X, X, X, X, 0 }, - { GIC_EXT_INTR(2), X, X, X, X, 0 }, - { GIC_EXT_INTR(3), 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, - { GIC_EXT_INTR(4), 0, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, - { GIC_EXT_INTR(5), 0, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, - { GIC_EXT_INTR(6), 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, - { GIC_EXT_INTR(7), 0, GIC_CPU_INT4, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, - { GIC_EXT_INTR(8), 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, - { GIC_EXT_INTR(9), 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, - { GIC_EXT_INTR(10), X, X, X, X, 0 }, - { GIC_EXT_INTR(11), X, X, X, X, 0 }, - { GIC_EXT_INTR(12), 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, - { GIC_EXT_INTR(13), 0, GIC_MAP_TO_NMI_MSK, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, - { GIC_EXT_INTR(14), 0, GIC_MAP_TO_NMI_MSK, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, - { GIC_EXT_INTR(15), X, X, X, X, 0 }, -/* This is the end of the general interrupts now we do IPI ones */ + { X, X, X, X, 0 }, + { X, X, X, X, 0 }, + { X, X, X, X, 0 }, + { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, + { 0, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, + { 0, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, + { 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, + { 0, GIC_CPU_INT4, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, + { 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, + { 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, + { X, X, X, X, 0 }, + { X, X, X, X, 0 }, + { 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, + { 0, GIC_CPU_NMI, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, + { 0, GIC_CPU_NMI, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, + { X, X, X, X, 0 }, + /* The remainder of this table is initialised by fill_ipi_map */ }; -#endif /* * GCMP needs to be detected before any SMP initialisation @@ -419,20 +419,35 @@ int __init gcmp_probe(unsigned long addr, unsigned long size) gcmp_present = (GCMPGCB(GCMPB) & GCMP_GCB_GCMPB_GCMPBASE_MSK) == GCMP_BASE_ADDR; if (gcmp_present) - printk(KERN_DEBUG "GCMP present\n"); + pr_debug("GCMP present\n"); return gcmp_present; } +/* Return the number of IOCU's present */ +int __init gcmp_niocu(void) +{ + return gcmp_present ? + (GCMPGCB(GC) & GCMP_GCB_GC_NUMIOCU_MSK) >> GCMP_GCB_GC_NUMIOCU_SHF : + 0; +} + +/* Set GCMP region attributes */ +void __init gcmp_setregion(int region, unsigned long base, + unsigned long mask, int type) +{ + GCMPGCBn(CMxBASE, region) = base; + GCMPGCBn(CMxMASK, region) = mask | type; +} + #if defined(CONFIG_MIPS_MT_SMP) static void __init fill_ipi_map1(int baseintr, int cpu, int cpupin) { int intr = baseintr + cpu; - gic_intr_map[intr].intrnum = GIC_EXT_INTR(intr); gic_intr_map[intr].cpunum = cpu; gic_intr_map[intr].pin = cpupin; gic_intr_map[intr].polarity = GIC_POL_POS; gic_intr_map[intr].trigtype = GIC_TRIG_EDGE; - gic_intr_map[intr].ipiflag = 1; + gic_intr_map[intr].flags = GIC_FLAG_IPI; ipi_map[cpu] |= (1 << (cpupin + 2)); } @@ -447,6 +462,12 @@ static void __init fill_ipi_map(void) } #endif +void __init arch_init_ipiirq(int irq, struct irqaction *action) +{ + setup_irq(irq, action); + set_irq_handler(irq, handle_percpu_irq); +} + void __init arch_init_irq(void) { init_i8259_irqs(); @@ -463,7 +484,7 @@ void __init arch_init_irq(void) MSC01_SC_CFG_GICPRES_MSK) >> MSC01_SC_CFG_GICPRES_SHF; } if (gic_present) - printk(KERN_DEBUG "GIC present\n"); + pr_debug("GIC present\n"); switch (mips_revision_sconid) { case MIPS_REVISION_SCON_SOCIT: @@ -526,16 +547,16 @@ void __init arch_init_irq(void) &corehi_irqaction); } -#if defined(CONFIG_MIPS_MT_SMP) if (gic_present) { /* FIXME */ int i; - +#if defined(CONFIG_MIPS_MT_SMP) gic_call_int_base = GIC_NUM_INTRS - NR_CPUS; gic_resched_int_base = gic_call_int_base - NR_CPUS; - fill_ipi_map(); - gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, gic_intr_map, ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE); +#endif + gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, gic_intr_map, + ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE); if (!gcmp_present) { /* Enable the GIC */ i = REG(_msc01_biu_base, MSC01_SC_CFG); @@ -543,7 +564,7 @@ void __init arch_init_irq(void) (i | (0x1 << MSC01_SC_CFG_GICENA_SHF)); pr_debug("GIC Enabled\n"); } - +#if defined(CONFIG_MIPS_MT_SMP) /* set up ipi interrupts */ if (cpu_has_vint) { set_vi_handler(MIPSCPU_INT_IPI0, malta_ipi_irqdispatch); @@ -556,16 +577,14 @@ void __init arch_init_irq(void) write_c0_status(0x1100dc00); printk("CPU%d: status register frc %08x\n", smp_processor_id(), read_c0_status()); for (i = 0; i < NR_CPUS; i++) { - setup_irq(MIPS_GIC_IRQ_BASE + - GIC_RESCHED_INT(i), &irq_resched); - setup_irq(MIPS_GIC_IRQ_BASE + - GIC_CALL_INT(i), &irq_call); - set_irq_handler(MIPS_GIC_IRQ_BASE + - GIC_RESCHED_INT(i), handle_percpu_irq); - set_irq_handler(MIPS_GIC_IRQ_BASE + - GIC_CALL_INT(i), handle_percpu_irq); + arch_init_ipiirq(MIPS_GIC_IRQ_BASE + + GIC_RESCHED_INT(i), &irq_resched); + arch_init_ipiirq(MIPS_GIC_IRQ_BASE + + GIC_CALL_INT(i), &irq_call); } +#endif } else { +#if defined(CONFIG_MIPS_MT_SMP) /* set up ipi interrupts */ if (cpu_has_veic) { set_vi_handler (MSC01E_INT_SW0, ipi_resched_dispatch); @@ -580,14 +599,10 @@ void __init arch_init_irq(void) cpu_ipi_resched_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ; cpu_ipi_call_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ; } - - setup_irq(cpu_ipi_resched_irq, &irq_resched); - setup_irq(cpu_ipi_call_irq, &irq_call); - - set_irq_handler(cpu_ipi_resched_irq, handle_percpu_irq); - set_irq_handler(cpu_ipi_call_irq, handle_percpu_irq); - } + arch_init_ipiirq(cpu_ipi_resched_irq, &irq_resched); + arch_init_ipiirq(cpu_ipi_call_irq, &irq_call); #endif + } } void malta_be_init(void) diff --git a/arch/mips/mti-malta/malta-pci.c b/arch/mips/mti-malta/malta-pci.c index efdb4f6..2fbfa1a 100644 --- a/arch/mips/mti-malta/malta-pci.c +++ b/arch/mips/mti-malta/malta-pci.c @@ -27,7 +27,7 @@ #include #include - +#include #include #include #include @@ -201,7 +201,11 @@ void __init mips_pcibios_init(void) msc_mem_resource.start = start & mask; msc_mem_resource.end = (start & mask) | ~mask; msc_controller.mem_offset = (start & mask) - (map & mask); - +#ifdef CONFIG_MIPS_CMP + if (gcmp_niocu()) + gcmp_setregion(0, start, mask, + GCMP_GCB_GCMPB_CMDEFTGT_IOCU1); +#endif MSC_READ(MSC01_PCI_SC2PIOBASL, start); MSC_READ(MSC01_PCI_SC2PIOMSKL, mask); MSC_READ(MSC01_PCI_SC2PIOMAPL, map); @@ -209,7 +213,11 @@ void __init mips_pcibios_init(void) msc_io_resource.end = (map & mask) | ~mask; msc_controller.io_offset = 0; ioport_resource.end = ~mask; - +#ifdef CONFIG_MIPS_CMP + if (gcmp_niocu()) + gcmp_setregion(1, start, mask, + GCMP_GCB_GCMPB_CMDEFTGT_IOCU1); +#endif /* If ranges overlap I/O takes precedence. */ start = start & mask; end = start | ~mask; -- cgit v0.10.2 From 05cf20790b3b3ed81cb001e8f41e473247f28302 Mon Sep 17 00:00:00 2001 From: Jaidev Patwardhan Date: Fri, 10 Jul 2009 01:54:25 -0700 Subject: MIPS: GCMP: Avoid accessing registers when they are not present Signed-off-by: Chris Dearman Signed-off-by: Ralf Baechle diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c index 377a925..4c3fca1 100644 --- a/arch/mips/mti-malta/malta-int.c +++ b/arch/mips/mti-malta/malta-int.c @@ -411,6 +411,11 @@ static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS] = { */ int __init gcmp_probe(unsigned long addr, unsigned long size) { + if (mips_revision_sconid != MIPS_REVISION_SCON_ROCIT) { + gcmp_present = 0; + return gcmp_present; + } + if (gcmp_present >= 0) return gcmp_present; @@ -479,9 +484,14 @@ void __init arch_init_irq(void) GCMPGCB(GICBA) = GIC_BASE_ADDR | GCMP_GCB_GICBA_EN_MSK; gic_present = 1; } else { - _msc01_biu_base = (unsigned long) ioremap_nocache(MSC01_BIU_REG_BASE, MSC01_BIU_ADDRSPACE_SZ); - gic_present = (REG(_msc01_biu_base, MSC01_SC_CFG) & - MSC01_SC_CFG_GICPRES_MSK) >> MSC01_SC_CFG_GICPRES_SHF; + if (mips_revision_sconid == MIPS_REVISION_SCON_ROCIT) { + _msc01_biu_base = (unsigned long) + ioremap_nocache(MSC01_BIU_REG_BASE, + MSC01_BIU_ADDRSPACE_SZ); + gic_present = (REG(_msc01_biu_base, MSC01_SC_CFG) & + MSC01_SC_CFG_GICPRES_MSK) >> + MSC01_SC_CFG_GICPRES_SHF; + } } if (gic_present) pr_debug("GIC present\n"); -- cgit v0.10.2 From 2e41f91d9e90e34254746fefcb7bb678a3c9d541 Mon Sep 17 00:00:00 2001 From: Jaidev Patwardhan Date: Fri, 10 Jul 2009 02:06:00 -0700 Subject: MIPS: SMTC: Avoid queing multiple reschedule IPIs Signed-off-by: Chris Dearman Signed-off-by: Ralf Baechle diff --git a/arch/mips/include/asm/smtc_ipi.h b/arch/mips/include/asm/smtc_ipi.h index 8ce5175..15278db 100644 --- a/arch/mips/include/asm/smtc_ipi.h +++ b/arch/mips/include/asm/smtc_ipi.h @@ -45,6 +45,7 @@ struct smtc_ipi_q { spinlock_t lock; struct smtc_ipi *tail; int depth; + int resched_flag; /* reschedule already queued */ }; static inline void smtc_ipi_nq(struct smtc_ipi_q *q, struct smtc_ipi *p) diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index 4d181df4..24630fd 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -75,7 +75,6 @@ unsigned long irq_hwmask[NR_IRQS]; asiduse smtc_live_asid[MAX_SMTC_TLBS][MAX_SMTC_ASIDS]; - /* * Number of InterProcessor Interrupt (IPI) message buffers to allocate */ @@ -388,6 +387,7 @@ void smtc_prepare_cpus(int cpus) IPIQ[i].head = IPIQ[i].tail = NULL; spin_lock_init(&IPIQ[i].lock); IPIQ[i].depth = 0; + IPIQ[i].resched_flag = 0; /* No reschedules queued initially */ } /* cpu_data index starts at zero */ @@ -741,11 +741,24 @@ void smtc_forward_irq(unsigned int irq) static void smtc_ipi_qdump(void) { int i; + struct smtc_ipi *temp; for (i = 0; i < NR_CPUS ;i++) { - printk("IPIQ[%d]: head = 0x%x, tail = 0x%x, depth = %d\n", + pr_info("IPIQ[%d]: head = 0x%x, tail = 0x%x, depth = %d\n", i, (unsigned)IPIQ[i].head, (unsigned)IPIQ[i].tail, IPIQ[i].depth); + temp = IPIQ[i].head; + + while (temp != IPIQ[i].tail) { + pr_debug("%d %d %d: ", temp->type, temp->dest, + (int)temp->arg); +#ifdef SMTC_IPI_DEBUG + pr_debug("%u %lu\n", temp->sender, temp->stamp); +#else + pr_debug("\n"); +#endif + temp = temp->flink; + } } } @@ -784,11 +797,16 @@ void smtc_send_ipi(int cpu, int type, unsigned int action) int mtflags; unsigned long tcrestart; extern void r4k_wait_irqoff(void), __pastwait(void); + int set_resched_flag = (type == LINUX_SMP_IPI && + action == SMP_RESCHEDULE_YOURSELF); if (cpu == smp_processor_id()) { printk("Cannot Send IPI to self!\n"); return; } + if (set_resched_flag && IPIQ[cpu].resched_flag != 0) + return; /* There is a reschedule queued already */ + /* Set up a descriptor, to be delivered either promptly or queued */ pipi = smtc_ipi_dq(&freeIPIq); if (pipi == NULL) { @@ -801,6 +819,7 @@ void smtc_send_ipi(int cpu, int type, unsigned int action) pipi->dest = cpu; if (cpu_data[cpu].vpe_id != cpu_data[smp_processor_id()].vpe_id) { /* If not on same VPE, enqueue and send cross-VPE interrupt */ + IPIQ[cpu].resched_flag |= set_resched_flag; smtc_ipi_nq(&IPIQ[cpu], pipi); LOCK_CORE_PRA(); settc(cpu_data[cpu].tc_id); @@ -847,6 +866,7 @@ void smtc_send_ipi(int cpu, int type, unsigned int action) */ write_tc_c0_tchalt(0); UNLOCK_CORE_PRA(); + IPIQ[cpu].resched_flag |= set_resched_flag; smtc_ipi_nq(&IPIQ[cpu], pipi); } else { postdirect: @@ -996,12 +1016,15 @@ void deferred_smtc_ipi(void) * already enabled. */ local_irq_save(flags); - spin_lock(&q->lock); pipi = __smtc_ipi_dq(q); spin_unlock(&q->lock); - if (pipi != NULL) + if (pipi != NULL) { + if (pipi->type == LINUX_SMP_IPI && + (int)pipi->arg == SMP_RESCHEDULE_YOURSELF) + IPIQ[cpu].resched_flag = 0; ipi_decode(pipi); + } /* * The use of the __raw_local restore isn't * as obviously necessary here as in smtc_ipi_replay(), @@ -1082,6 +1105,9 @@ static irqreturn_t ipi_interrupt(int irq, void *dev_idm) * with interrupts off */ local_irq_save(flags); + if (pipi->type == LINUX_SMP_IPI && + (int)pipi->arg == SMP_RESCHEDULE_YOURSELF) + IPIQ[cpu].resched_flag = 0; ipi_decode(pipi); local_irq_restore(flags); } -- cgit v0.10.2 From 0db2b74e9150651a25ffd2e2285575ce193f763c Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 13 Oct 2009 16:54:01 +0200 Subject: MIPS: Set S-cache linesize to 64-bytes for MTI's S-cache Signed-off-by: Ralf Baechle diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 7159495..03bd56a 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1013,6 +1013,7 @@ config BOOT_ELF32 config MIPS_L1_CACHE_SHIFT int default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL + default "6" if MIPS_CPU_SCACHE default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM || CPU_CAVIUM_OCTEON default "5" -- cgit v0.10.2 From b6b74d5490c3ad88de503e0c5d44e4820b79b678 Mon Sep 17 00:00:00 2001 From: David Daney Date: Tue, 13 Oct 2009 08:52:28 -0700 Subject: MIPS: Octeon: Use write_{un,}lock_irq{restore,save} to set irq affinity Since the locks are used from interrupt context we need the irqsave/irqrestore versions of the locking functions. Signed-off-by: David Daney Signed-off-by: Ralf Baechle diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c index 384f184..0bda5c5 100644 --- a/arch/mips/cavium-octeon/octeon-irq.c +++ b/arch/mips/cavium-octeon/octeon-irq.c @@ -182,9 +182,10 @@ static void octeon_irq_ciu0_disable(unsigned int irq) static int octeon_irq_ciu0_set_affinity(unsigned int irq, const struct cpumask *dest) { int cpu; + unsigned long flags; int bit = irq - OCTEON_IRQ_WORKQ0; /* Bit 0-63 of EN0 */ - write_lock(&octeon_irq_ciu0_rwlock); + write_lock_irqsave(&octeon_irq_ciu0_rwlock, flags); for_each_online_cpu(cpu) { int coreid = cpu_logical_map(cpu); uint64_t en0 = @@ -200,7 +201,7 @@ static int octeon_irq_ciu0_set_affinity(unsigned int irq, const struct cpumask * * of them are done. */ cvmx_read_csr(CVMX_CIU_INTX_EN0(cvmx_get_core_num() * 2)); - write_unlock(&octeon_irq_ciu0_rwlock); + write_unlock_irqrestore(&octeon_irq_ciu0_rwlock, flags); return 0; } @@ -299,9 +300,10 @@ static void octeon_irq_ciu1_disable(unsigned int irq) static int octeon_irq_ciu1_set_affinity(unsigned int irq, const struct cpumask *dest) { int cpu; + unsigned long flags; int bit = irq - OCTEON_IRQ_WDOG0; /* Bit 0-63 of EN1 */ - write_lock(&octeon_irq_ciu1_rwlock); + write_lock_irqsave(&octeon_irq_ciu1_rwlock, flags); for_each_online_cpu(cpu) { int coreid = cpu_logical_map(cpu); uint64_t en1 = @@ -318,7 +320,7 @@ static int octeon_irq_ciu1_set_affinity(unsigned int irq, const struct cpumask * * of them are done. */ cvmx_read_csr(CVMX_CIU_INTX_EN1(cvmx_get_core_num() * 2 + 1)); - write_unlock(&octeon_irq_ciu1_rwlock); + write_unlock_irqrestore(&octeon_irq_ciu1_rwlock, flags); return 0; } -- cgit v0.10.2 From cd847b7857b835f9730d6fc93c3f423fcacc50f7 Mon Sep 17 00:00:00 2001 From: David Daney Date: Tue, 13 Oct 2009 11:26:03 -0700 Subject: MIPS: Octeon: Use lockless interrupt controller operations when possible. Some newer Octeon chips have registers that allow lockless operation of the interrupt controller. Take advantage of them. Signed-off-by: David Daney Signed-off-by: Ralf Baechle diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c index 0bda5c5..6f2acf0 100644 --- a/arch/mips/cavium-octeon/octeon-irq.c +++ b/arch/mips/cavium-octeon/octeon-irq.c @@ -17,6 +17,15 @@ DEFINE_RWLOCK(octeon_irq_ciu0_rwlock); DEFINE_RWLOCK(octeon_irq_ciu1_rwlock); DEFINE_SPINLOCK(octeon_irq_msi_lock); +static int octeon_coreid_for_cpu(int cpu) +{ +#ifdef CONFIG_SMP + return cpu_logical_map(cpu); +#else + return cvmx_get_core_num(); +#endif +} + static void octeon_irq_core_ack(unsigned int irq) { unsigned int bit = irq - OCTEON_IRQ_SW0; @@ -152,11 +161,10 @@ static void octeon_irq_ciu0_disable(unsigned int irq) int bit = irq - OCTEON_IRQ_WORKQ0; /* Bit 0-63 of EN0 */ unsigned long flags; uint64_t en0; -#ifdef CONFIG_SMP int cpu; write_lock_irqsave(&octeon_irq_ciu0_rwlock, flags); for_each_online_cpu(cpu) { - int coreid = cpu_logical_map(cpu); + int coreid = octeon_coreid_for_cpu(cpu); en0 = cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2)); en0 &= ~(1ull << bit); cvmx_write_csr(CVMX_CIU_INTX_EN0(coreid * 2), en0); @@ -167,15 +175,45 @@ static void octeon_irq_ciu0_disable(unsigned int irq) */ cvmx_read_csr(CVMX_CIU_INTX_EN0(cvmx_get_core_num() * 2)); write_unlock_irqrestore(&octeon_irq_ciu0_rwlock, flags); -#else - int coreid = cvmx_get_core_num(); - local_irq_save(flags); - en0 = cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2)); - en0 &= ~(1ull << bit); - cvmx_write_csr(CVMX_CIU_INTX_EN0(coreid * 2), en0); - cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2)); - local_irq_restore(flags); -#endif +} + +/* + * Enable the irq on the current core for chips that have the EN*_W1{S,C} + * registers. + */ +static void octeon_irq_ciu0_enable_v2(unsigned int irq) +{ + int index = cvmx_get_core_num() * 2; + u64 mask = 1ull << (irq - OCTEON_IRQ_WORKQ0); + + cvmx_write_csr(CVMX_CIU_INTX_EN0_W1S(index), mask); +} + +/* + * Disable the irq on the current core for chips that have the EN*_W1{S,C} + * registers. + */ +static void octeon_irq_ciu0_disable_v2(unsigned int irq) +{ + int index = cvmx_get_core_num() * 2; + u64 mask = 1ull << (irq - OCTEON_IRQ_WORKQ0); + + cvmx_write_csr(CVMX_CIU_INTX_EN0_W1C(index), mask); +} + +/* + * Disable the irq on the all cores for chips that have the EN*_W1{S,C} + * registers. + */ +static void octeon_irq_ciu0_disable_all_v2(unsigned int irq) +{ + u64 mask = 1ull << (irq - OCTEON_IRQ_WORKQ0); + int index; + int cpu; + for_each_online_cpu(cpu) { + index = octeon_coreid_for_cpu(cpu) * 2; + cvmx_write_csr(CVMX_CIU_INTX_EN0_W1C(index), mask); + } } #ifdef CONFIG_SMP @@ -187,7 +225,7 @@ static int octeon_irq_ciu0_set_affinity(unsigned int irq, const struct cpumask * write_lock_irqsave(&octeon_irq_ciu0_rwlock, flags); for_each_online_cpu(cpu) { - int coreid = cpu_logical_map(cpu); + int coreid = octeon_coreid_for_cpu(cpu); uint64_t en0 = cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2)); if (cpumask_test_cpu(cpu, dest)) @@ -205,8 +243,42 @@ static int octeon_irq_ciu0_set_affinity(unsigned int irq, const struct cpumask * return 0; } + +/* + * Set affinity for the irq for chips that have the EN*_W1{S,C} + * registers. + */ +static int octeon_irq_ciu0_set_affinity_v2(unsigned int irq, + const struct cpumask *dest) +{ + int cpu; + int index; + u64 mask = 1ull << (irq - OCTEON_IRQ_WORKQ0); + for_each_online_cpu(cpu) { + index = octeon_coreid_for_cpu(cpu) * 2; + if (cpumask_test_cpu(cpu, dest)) + cvmx_write_csr(CVMX_CIU_INTX_EN0_W1S(index), mask); + else + cvmx_write_csr(CVMX_CIU_INTX_EN0_W1C(index), mask); + } + return 0; +} #endif +/* + * Newer octeon chips have support for lockless CIU operation. + */ +static struct irq_chip octeon_irq_chip_ciu0_v2 = { + .name = "CIU0", + .enable = octeon_irq_ciu0_enable_v2, + .disable = octeon_irq_ciu0_disable_all_v2, + .ack = octeon_irq_ciu0_disable_v2, + .eoi = octeon_irq_ciu0_enable_v2, +#ifdef CONFIG_SMP + .set_affinity = octeon_irq_ciu0_set_affinity_v2, +#endif +}; + static struct irq_chip octeon_irq_chip_ciu0 = { .name = "CIU0", .enable = octeon_irq_ciu0_enable, @@ -270,11 +342,10 @@ static void octeon_irq_ciu1_disable(unsigned int irq) int bit = irq - OCTEON_IRQ_WDOG0; /* Bit 0-63 of EN1 */ unsigned long flags; uint64_t en1; -#ifdef CONFIG_SMP int cpu; write_lock_irqsave(&octeon_irq_ciu1_rwlock, flags); for_each_online_cpu(cpu) { - int coreid = cpu_logical_map(cpu); + int coreid = octeon_coreid_for_cpu(cpu); en1 = cvmx_read_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1)); en1 &= ~(1ull << bit); cvmx_write_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1), en1); @@ -285,19 +356,50 @@ static void octeon_irq_ciu1_disable(unsigned int irq) */ cvmx_read_csr(CVMX_CIU_INTX_EN1(cvmx_get_core_num() * 2 + 1)); write_unlock_irqrestore(&octeon_irq_ciu1_rwlock, flags); -#else - int coreid = cvmx_get_core_num(); - local_irq_save(flags); - en1 = cvmx_read_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1)); - en1 &= ~(1ull << bit); - cvmx_write_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1), en1); - cvmx_read_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1)); - local_irq_restore(flags); -#endif +} + +/* + * Enable the irq on the current core for chips that have the EN*_W1{S,C} + * registers. + */ +static void octeon_irq_ciu1_enable_v2(unsigned int irq) +{ + int index = cvmx_get_core_num() * 2 + 1; + u64 mask = 1ull << (irq - OCTEON_IRQ_WDOG0); + + cvmx_write_csr(CVMX_CIU_INTX_EN1_W1S(index), mask); +} + +/* + * Disable the irq on the current core for chips that have the EN*_W1{S,C} + * registers. + */ +static void octeon_irq_ciu1_disable_v2(unsigned int irq) +{ + int index = cvmx_get_core_num() * 2 + 1; + u64 mask = 1ull << (irq - OCTEON_IRQ_WDOG0); + + cvmx_write_csr(CVMX_CIU_INTX_EN1_W1C(index), mask); +} + +/* + * Disable the irq on the all cores for chips that have the EN*_W1{S,C} + * registers. + */ +static void octeon_irq_ciu1_disable_all_v2(unsigned int irq) +{ + u64 mask = 1ull << (irq - OCTEON_IRQ_WDOG0); + int index; + int cpu; + for_each_online_cpu(cpu) { + index = octeon_coreid_for_cpu(cpu) * 2 + 1; + cvmx_write_csr(CVMX_CIU_INTX_EN1_W1C(index), mask); + } } #ifdef CONFIG_SMP -static int octeon_irq_ciu1_set_affinity(unsigned int irq, const struct cpumask *dest) +static int octeon_irq_ciu1_set_affinity(unsigned int irq, + const struct cpumask *dest) { int cpu; unsigned long flags; @@ -305,7 +407,7 @@ static int octeon_irq_ciu1_set_affinity(unsigned int irq, const struct cpumask * write_lock_irqsave(&octeon_irq_ciu1_rwlock, flags); for_each_online_cpu(cpu) { - int coreid = cpu_logical_map(cpu); + int coreid = octeon_coreid_for_cpu(cpu); uint64_t en1 = cvmx_read_csr(CVMX_CIU_INTX_EN1 (coreid * 2 + 1)); @@ -324,8 +426,42 @@ static int octeon_irq_ciu1_set_affinity(unsigned int irq, const struct cpumask * return 0; } + +/* + * Set affinity for the irq for chips that have the EN*_W1{S,C} + * registers. + */ +static int octeon_irq_ciu1_set_affinity_v2(unsigned int irq, + const struct cpumask *dest) +{ + int cpu; + int index; + u64 mask = 1ull << (irq - OCTEON_IRQ_WDOG0); + for_each_online_cpu(cpu) { + index = octeon_coreid_for_cpu(cpu) * 2 + 1; + if (cpumask_test_cpu(cpu, dest)) + cvmx_write_csr(CVMX_CIU_INTX_EN1_W1S(index), mask); + else + cvmx_write_csr(CVMX_CIU_INTX_EN1_W1C(index), mask); + } + return 0; +} #endif +/* + * Newer octeon chips have support for lockless CIU operation. + */ +static struct irq_chip octeon_irq_chip_ciu1_v2 = { + .name = "CIU0", + .enable = octeon_irq_ciu1_enable_v2, + .disable = octeon_irq_ciu1_disable_all_v2, + .ack = octeon_irq_ciu1_disable_v2, + .eoi = octeon_irq_ciu1_enable_v2, +#ifdef CONFIG_SMP + .set_affinity = octeon_irq_ciu1_set_affinity_v2, +#endif +}; + static struct irq_chip octeon_irq_chip_ciu1 = { .name = "CIU1", .enable = octeon_irq_ciu1_enable, @@ -422,6 +558,8 @@ static struct irq_chip octeon_irq_chip_msi = { void __init arch_init_irq(void) { int irq; + struct irq_chip *chip0; + struct irq_chip *chip1; #ifdef CONFIG_SMP /* Set the default affinity to the boot cpu. */ @@ -432,6 +570,16 @@ void __init arch_init_irq(void) if (NR_IRQS < OCTEON_IRQ_LAST) pr_err("octeon_irq_init: NR_IRQS is set too low\n"); + if (OCTEON_IS_MODEL(OCTEON_CN58XX_PASS2_X) || + OCTEON_IS_MODEL(OCTEON_CN56XX_PASS2_X) || + OCTEON_IS_MODEL(OCTEON_CN52XX_PASS2_X)) { + chip0 = &octeon_irq_chip_ciu0_v2; + chip1 = &octeon_irq_chip_ciu1_v2; + } else { + chip0 = &octeon_irq_chip_ciu0; + chip1 = &octeon_irq_chip_ciu1; + } + /* 0 - 15 reserved for i8259 master and slave controller. */ /* 17 - 23 Mips internal */ @@ -442,14 +590,12 @@ void __init arch_init_irq(void) /* 24 - 87 CIU_INT_SUM0 */ for (irq = OCTEON_IRQ_WORKQ0; irq <= OCTEON_IRQ_BOOTDMA; irq++) { - set_irq_chip_and_handler(irq, &octeon_irq_chip_ciu0, - handle_percpu_irq); + set_irq_chip_and_handler(irq, chip0, handle_percpu_irq); } /* 88 - 151 CIU_INT_SUM1 */ for (irq = OCTEON_IRQ_WDOG0; irq <= OCTEON_IRQ_RESERVED151; irq++) { - set_irq_chip_and_handler(irq, &octeon_irq_chip_ciu1, - handle_percpu_irq); + set_irq_chip_and_handler(irq, chip1, handle_percpu_irq); } #ifdef CONFIG_PCI_MSI @@ -507,14 +653,10 @@ asmlinkage void plat_irq_dispatch(void) #ifdef CONFIG_HOTPLUG_CPU static int is_irq_enabled_on_cpu(unsigned int irq, unsigned int cpu) { - unsigned int isset; -#ifdef CONFIG_SMP - int coreid = cpu_logical_map(cpu); -#else - int coreid = cvmx_get_core_num(); -#endif + unsigned int isset; + int coreid = octeon_coreid_for_cpu(cpu); int bit = (irq < OCTEON_IRQ_WDOG0) ? - irq - OCTEON_IRQ_WORKQ0 : irq - OCTEON_IRQ_WDOG0; + irq - OCTEON_IRQ_WORKQ0 : irq - OCTEON_IRQ_WDOG0; if (irq < 64) { isset = (cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2)) & (1ull << bit)) >> bit; -- cgit v0.10.2 From c2ea1d56eaf084c66177eb5658ff4065e79b36ea Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 13 Oct 2009 23:23:28 +0200 Subject: MIPS: Avoid potential hazard on Context register set_saved_sp reads Context register. Avoid reading stale value from earlier incomplete write. Issue found and fixed for head.S by Chris Dearman . Signed-off-by: Chris Dearman Signed-off-by: Ralf Baechle diff --git a/arch/mips/include/asm/mmu_context.h b/arch/mips/include/asm/mmu_context.h index ed331c2..6083db5 100644 --- a/arch/mips/include/asm/mmu_context.h +++ b/arch/mips/include/asm/mmu_context.h @@ -16,6 +16,7 @@ #include #include #include +#include #include #ifdef CONFIG_MIPS_MT_SMTC #include @@ -36,11 +37,13 @@ extern unsigned long pgd_current[]; #ifdef CONFIG_32BIT #define TLBMISS_HANDLER_SETUP() \ write_c0_context((unsigned long) smp_processor_id() << 25); \ + back_to_back_c0_hazard(); \ TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir) #endif #ifdef CONFIG_64BIT #define TLBMISS_HANDLER_SETUP() \ write_c0_context((unsigned long) smp_processor_id() << 26); \ + back_to_back_c0_hazard(); \ TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir) #endif diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S index 531ce7b..ea695d9 100644 --- a/arch/mips/kernel/head.S +++ b/arch/mips/kernel/head.S @@ -191,6 +191,7 @@ NESTED(kernel_entry, 16, sp) # kernel entry point /* Set the SP after an empty pt_regs. */ PTR_LI sp, _THREAD_SIZE - 32 - PT_SIZE PTR_ADDU sp, $28 + back_to_back_c0_hazard set_saved_sp sp, t0, t1 PTR_SUBU sp, 4 * SZREG # init stack pointer -- cgit v0.10.2 From e8d4c342e5cfecb8080c181e881deb35ef99806d Mon Sep 17 00:00:00 2001 From: Zhang Le Date: Fri, 19 Jun 2009 18:01:39 +0800 Subject: MIPS: Loongson 2: Set cpu_has_dc_aliases and cpu_icache_snoops_remote_store Loongson 2 does not have dcache aliases when is using 16k pages. and the And because Loongson 2 doesn't do SMP , cpu_icache_snoops_remote_store does not matter here. Signed-off-by: Zhang Le Signed-off-by: Ralf Baechle diff --git a/arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h b/arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h index ce5b6e27..9947e57 100644 --- a/arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h @@ -29,7 +29,7 @@ #define cpu_has_cache_cdex_p 0 #define cpu_has_cache_cdex_s 0 #define cpu_has_counter 1 -#define cpu_has_dc_aliases 1 +#define cpu_has_dc_aliases (PAGE_SIZE < 0x4000) #define cpu_has_divec 0 #define cpu_has_dsp 0 #define cpu_has_ejtag 0 @@ -54,6 +54,5 @@ #define cpu_has_vce 0 #define cpu_has_vtag_icache 0 #define cpu_has_watch 1 -#define cpu_icache_snoops_remote_store 1 #endif /* __ASM_MACH_LOONGSON_CPU_FEATURE_OVERRIDES_H */ -- cgit v0.10.2 From 2b5b9b786c177fa4bca1646325a1dd98c4399523 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 14 Oct 2009 09:56:00 +0200 Subject: MIPS: bcm63xx: Set the correct BCM3302 CPU name For consistency with other BCM63xx SoC set the CPU name to "Broadcom BCM6338" when actually running on that system. Signed-off-by: Florian Fainelli Signed-off-by: Ralf Baechle diff --git a/arch/mips/bcm63xx/cpu.c b/arch/mips/bcm63xx/cpu.c index 6dc43f0..70378bb 100644 --- a/arch/mips/bcm63xx/cpu.c +++ b/arch/mips/bcm63xx/cpu.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include @@ -284,6 +285,7 @@ void __init bcm63xx_cpu_init(void) { unsigned int tmp, expected_cpu_id; struct cpuinfo_mips *c = ¤t_cpu_data; + unsigned int cpu = smp_processor_id(); /* soc registers location depends on cpu type */ expected_cpu_id = 0; @@ -293,6 +295,7 @@ void __init bcm63xx_cpu_init(void) * BCM6338 as the same PrId as BCM3302 see arch/mips/kernel/cpu-probe.c */ case CPU_BCM3302: + __cpu_name[cpu] = "Broadcom BCM6338"; expected_cpu_id = BCM6338_CPU_ID; bcm63xx_regs_base = bcm96338_regs_base; bcm63xx_irqs = bcm96338_irqs; -- cgit v0.10.2 From fcc152f3bf55cec61167b173774cbf717b0ff5e4 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Thu, 3 Sep 2009 22:59:00 +0900 Subject: MIPS: TXx9: Fix spi-baseclk value TXx9 SPI bit rate is calculated by: fBR = fSPI / 2 / (n + 1) (fSPI is SPI master clock freq, i.e. imbusclk freq.) So use imbus_clk / 2 as a spi-baseclk. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index dfe4720..e10184c 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -85,7 +85,7 @@ int txx9_ccfg_toeon __initdata = 1; struct clk *clk_get(struct device *dev, const char *id) { if (!strcmp(id, "spi-baseclk")) - return (struct clk *)((unsigned long)txx9_gbus_clock / 2 / 4); + return (struct clk *)((unsigned long)txx9_gbus_clock / 2 / 2); if (!strcmp(id, "imbus_clk")) return (struct clk *)((unsigned long)txx9_gbus_clock / 2); return ERR_PTR(-ENOENT); -- cgit v0.10.2 From 44f2c586a3553154bc6549eb696c7716c85f910b Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Wed, 14 Oct 2009 12:22:20 +0200 Subject: MIPS: Alchemy: Fix hang with high-frequency edge interrupts The handle_edge_irq() flowhandler disables edge int sources which occur too fast (i.e. another edge comes in before the irq handler function had a chance to finish). Currently, the mask_ack() callback does not ack the edges in hardware, leading to an endless loop in the flowhandler where it tries to shut up the irq source. When I rewrote the alchemy IRQ code I wrongly assumed the mask_ack() callback was only used by the level flowhandler, hence it omitted the (at the time pointless) edge acks. Turned out I was wrong; so here is a complete mask_ack implementation for Alchemy IC, which fixes the above mentioned problem. Signed-off-by: Manuel Lauss Signed-off-by: Ralf Baechle diff --git a/arch/mips/alchemy/common/irq.c b/arch/mips/alchemy/common/irq.c index c88c821..d670928 100644 --- a/arch/mips/alchemy/common/irq.c +++ b/arch/mips/alchemy/common/irq.c @@ -354,6 +354,28 @@ static void au1x_ic1_ack(unsigned int irq_nr) au_sync(); } +static void au1x_ic0_maskack(unsigned int irq_nr) +{ + unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE; + + au_writel(1 << bit, IC0_WAKECLR); + au_writel(1 << bit, IC0_MASKCLR); + au_writel(1 << bit, IC0_RISINGCLR); + au_writel(1 << bit, IC0_FALLINGCLR); + au_sync(); +} + +static void au1x_ic1_maskack(unsigned int irq_nr) +{ + unsigned int bit = irq_nr - AU1000_INTC1_INT_BASE; + + au_writel(1 << bit, IC1_WAKECLR); + au_writel(1 << bit, IC1_MASKCLR); + au_writel(1 << bit, IC1_RISINGCLR); + au_writel(1 << bit, IC1_FALLINGCLR); + au_sync(); +} + static int au1x_ic1_setwake(unsigned int irq, unsigned int on) { unsigned int bit = irq - AU1000_INTC1_INT_BASE; @@ -379,25 +401,21 @@ static int au1x_ic1_setwake(unsigned int irq, unsigned int on) /* * irq_chips for both ICs; this way the mask handlers can be * as short as possible. - * - * NOTE: the ->ack() callback is used by the handle_edge_irq - * flowhandler only, the ->mask_ack() one by handle_level_irq, - * so no need for an irq_chip for each type of irq (level/edge). */ static struct irq_chip au1x_ic0_chip = { .name = "Alchemy-IC0", - .ack = au1x_ic0_ack, /* edge */ + .ack = au1x_ic0_ack, .mask = au1x_ic0_mask, - .mask_ack = au1x_ic0_mask, /* level */ + .mask_ack = au1x_ic0_maskack, .unmask = au1x_ic0_unmask, .set_type = au1x_ic_settype, }; static struct irq_chip au1x_ic1_chip = { .name = "Alchemy-IC1", - .ack = au1x_ic1_ack, /* edge */ + .ack = au1x_ic1_ack, .mask = au1x_ic1_mask, - .mask_ack = au1x_ic1_mask, /* level */ + .mask_ack = au1x_ic1_maskack, .unmask = au1x_ic1_unmask, .set_type = au1x_ic_settype, .set_wake = au1x_ic1_setwake, -- cgit v0.10.2 From 55f4e1d4fe88f16f773ba5bb31ce8c1ae63724af Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Wed, 21 Oct 2009 22:51:46 +0800 Subject: MIPS: Oprofile: Rename cpu_type from godson2 to loongson2 Unify the naming method between kernel and the user-space oprofile tool. Because loongson is used instead of godson in most of the places, we agreed to use loongson instead, which will simplify future maintenance. Signed-off-by: Wu Zhangjin Acked-by: Robert Richter Signed-off-by: Ralf Baechle diff --git a/arch/mips/oprofile/op_model_loongson2.c b/arch/mips/oprofile/op_model_loongson2.c index deed1d5..575cd14 100644 --- a/arch/mips/oprofile/op_model_loongson2.c +++ b/arch/mips/oprofile/op_model_loongson2.c @@ -22,7 +22,7 @@ * otherwise, the oprofile tool will not recognize this and complain about * "cpu_type 'unset' is not valid". */ -#define LOONGSON2_CPU_TYPE "mips/godson2" +#define LOONGSON2_CPU_TYPE "mips/loongson2" #define LOONGSON2_COUNTER1_EVENT(event) ((event & 0x0f) << 5) #define LOONGSON2_COUNTER2_EVENT(event) ((event & 0x0f) << 9) -- cgit v0.10.2 From 049a31afe16e733a54f7da7fdf845034758c6ee1 Mon Sep 17 00:00:00 2001 From: Arnaud Patard Date: Tue, 20 Oct 2009 10:27:47 +0200 Subject: MIPS: O32: Fix ppoll sys_ppoll syscall needs to use a compat handler on 64bit kernels with o32 user-space. Signed-off-by: Arnaud Patard Signed-off-by: Ralf Baechle diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index ba0dde6..14dde4c 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -505,7 +505,7 @@ sys_call_table: PTR sys_fchmodat PTR sys_faccessat /* 4300 */ PTR compat_sys_pselect6 - PTR sys_ppoll + PTR compat_sys_ppoll PTR sys_unshare PTR sys_splice PTR sys32_sync_file_range /* 4305 */ -- cgit v0.10.2 From 23aebca486429b74c35b41ac5cac7ce97609fd6a Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 2 Nov 2009 14:10:59 +0100 Subject: ALSA: dummy - Fix descriptions of pcm_substreams parameter Now up to 128 substreams are supported. Reported-by: Adrian Bridgett Signed-off-by: Takashi Iwai diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 1c8eb45..fd9a2f6 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -522,7 +522,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. pcm_devs - Number of PCM devices assigned to each card (default = 1, up to 4) pcm_substreams - Number of PCM substreams assigned to each PCM - (default = 8, up to 16) + (default = 8, up to 128) hrtimer - Use hrtimer (=1, default) or system timer (=0) fake_buffer - Fake buffer allocations (default = 1) diff --git a/sound/drivers/dummy.c b/sound/drivers/dummy.c index 146ef00..252e04c 100644 --- a/sound/drivers/dummy.c +++ b/sound/drivers/dummy.c @@ -165,7 +165,7 @@ MODULE_PARM_DESC(enable, "Enable this dummy soundcard."); module_param_array(pcm_devs, int, NULL, 0444); MODULE_PARM_DESC(pcm_devs, "PCM devices # (0-4) for dummy driver."); module_param_array(pcm_substreams, int, NULL, 0444); -MODULE_PARM_DESC(pcm_substreams, "PCM substreams # (1-16) for dummy driver."); +MODULE_PARM_DESC(pcm_substreams, "PCM substreams # (1-128) for dummy driver."); //module_param_array(midi_devs, int, NULL, 0444); //MODULE_PARM_DESC(midi_devs, "MIDI devices # (0-2) for dummy driver."); module_param(fake_buffer, bool, 0444); -- cgit v0.10.2 From ad87c64f00e01a694bf90bddc2b4a6c90796d13c Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 2 Nov 2009 14:23:15 +0100 Subject: ALSA: hda - Don't check invalid HP pin alc_automute_pin() might be called even if any HP pin is defined, and it will result in verbs with NID=0. This patch adds a check for the validity of HP widget before issuing any verbs. Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 148734d..ff20048 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -965,6 +965,8 @@ static void alc_automute_pin(struct hda_codec *codec) unsigned int nid = spec->autocfg.hp_pins[0]; int i; + if (!nid) + return; pincap = snd_hda_query_pin_caps(codec, nid); if (pincap & AC_PINCAP_TRIG_REQ) /* need trigger? */ snd_hda_codec_read(codec, nid, 0, AC_VERB_SET_PIN_SENSE, 0); -- cgit v0.10.2 From f91b90993f0d286be89f06c2f547ced8cfe291c6 Mon Sep 17 00:00:00 2001 From: Martin Stava Date: Mon, 2 Nov 2009 08:39:35 -0600 Subject: 9p: fix a small bug in readdir for long directories Here is a proposed patch for bug in readdir. Listing of dirs with many files fails without this patch. Signed-off-by: Martin Stava Signed-off-by: Eric Van Hensbergen diff --git a/fs/9p/vfs_dir.c b/fs/9p/vfs_dir.c index 873cd31..cae53d4 100644 --- a/fs/9p/vfs_dir.c +++ b/fs/9p/vfs_dir.c @@ -90,6 +90,7 @@ static int v9fs_dir_readdir(struct file *filp, void *dirent, filldir_t filldir) if (err <= 0) break; + i = 0; n = err; while (i < n) { err = p9stat_read(statbuf + i, buflen-i, &st, -- cgit v0.10.2 From 2511cd0b3b9e9b1c3e9360cc565c3745ac3f3f3f Mon Sep 17 00:00:00 2001 From: Martin Stava Date: Mon, 2 Nov 2009 08:39:34 -0600 Subject: 9p: fix readlink I do not know if you've looked on the patch, but unfortunately it is incorrect. A suggested better version is in this email (the old version didn't work in case the user provided buffer was not long enough - it incorrectly appended null byte on a position of last char, and thus broke the contract of the readlink method). However, I'm still not sure this is 100% correct thing to do, I think readlink is supposed to return buffer without last null byte in all cases, but we do return last null byte (even the old version).. on the other hand it is likely unspecified what is in the remaining part of the buffer, so null character may be fine there ;): Signed-off-by: Martin Stava Signed-off-by: Eric Van Hensbergen diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c index 5947628..18f74ec 100644 --- a/fs/9p/vfs_inode.c +++ b/fs/9p/vfs_inode.c @@ -994,8 +994,7 @@ static int v9fs_readlink(struct dentry *dentry, char *buffer, int buflen) P9_DPRINTK(P9_DEBUG_VFS, "%s -> %s (%s)\n", dentry->d_name.name, st->extension, buffer); - retval = buflen; - + retval = strnlen(buffer, buflen); done: kfree(st); return retval; @@ -1062,7 +1061,7 @@ static void *v9fs_vfs_follow_link(struct dentry *dentry, struct nameidata *nd) __putname(link); link = ERR_PTR(len); } else - link[len] = 0; + link[min(len, PATH_MAX-1)] = 0; } nd_set_link(nd, link); -- cgit v0.10.2 From 3e2796a90cf349527e50b3bc4d0b2f4019b1ce7a Mon Sep 17 00:00:00 2001 From: Eric Van Hensbergen Date: Mon, 2 Nov 2009 08:39:28 -0600 Subject: 9p: fix readdir corner cases The patch below also addresses a couple of other corner cases in readdir seen with a large (e.g. 64k) msize. I'm not sure what people think of my co-opting of fid->aux here. I'd be happy to rework if there's a better way. When the size of the user supplied buffer passed to readdir is smaller than the data returned in one go by the 9P read request, v9fs_dir_readdir() currently discards extra data so that, on the next call, a 9P read request will be issued with offset < previous offset + bytes returned, which voilates the constraint described in paragraph 3 of read(5) description. This patch preseves the leftover data in fid->aux for use in the next call. Signed-off-by: Jim Garlick Signed-off-by: Eric Van Hensbergen diff --git a/fs/9p/vfs_dir.c b/fs/9p/vfs_dir.c index cae53d4..15cce53 100644 --- a/fs/9p/vfs_dir.c +++ b/fs/9p/vfs_dir.c @@ -40,6 +40,24 @@ #include "fid.h" /** + * struct p9_rdir - readdir accounting + * @mutex: mutex protecting readdir + * @head: start offset of current dirread buffer + * @tail: end offset of current dirread buffer + * @buf: dirread buffer + * + * private structure for keeping track of readdir + * allocated on demand + */ + +struct p9_rdir { + struct mutex mutex; + int head; + int tail; + uint8_t *buf; +}; + +/** * dt_type - return file type * @mistat: mistat structure * @@ -70,57 +88,79 @@ static int v9fs_dir_readdir(struct file *filp, void *dirent, filldir_t filldir) { int over; struct p9_wstat st; - int err; + int err = 0; struct p9_fid *fid; int buflen; - char *statbuf; - int n, i = 0; + int reclen = 0; + struct p9_rdir *rdir; P9_DPRINTK(P9_DEBUG_VFS, "name %s\n", filp->f_path.dentry->d_name.name); fid = filp->private_data; buflen = fid->clnt->msize - P9_IOHDRSZ; - statbuf = kmalloc(buflen, GFP_KERNEL); - if (!statbuf) - return -ENOMEM; - - while (1) { - err = v9fs_file_readn(filp, statbuf, NULL, buflen, - fid->rdir_fpos); - if (err <= 0) - break; - - i = 0; - n = err; - while (i < n) { - err = p9stat_read(statbuf + i, buflen-i, &st, - fid->clnt->dotu); + + /* allocate rdir on demand */ + if (!fid->rdir) { + rdir = kmalloc(sizeof(struct p9_rdir) + buflen, GFP_KERNEL); + + if (rdir == NULL) { + err = -ENOMEM; + goto exit; + } + spin_lock(&filp->f_dentry->d_lock); + if (!fid->rdir) { + rdir->buf = (uint8_t *)rdir + sizeof(struct p9_rdir); + mutex_init(&rdir->mutex); + rdir->head = rdir->tail = 0; + fid->rdir = (void *) rdir; + rdir = NULL; + } + spin_unlock(&filp->f_dentry->d_lock); + kfree(rdir); + } + rdir = (struct p9_rdir *) fid->rdir; + + err = mutex_lock_interruptible(&rdir->mutex); + while (err == 0) { + if (rdir->tail == rdir->head) { + err = v9fs_file_readn(filp, rdir->buf, NULL, + buflen, filp->f_pos); + if (err <= 0) + goto unlock_and_exit; + + rdir->head = 0; + rdir->tail = err; + } + + while (rdir->head < rdir->tail) { + err = p9stat_read(rdir->buf + rdir->head, + buflen - rdir->head, &st, + fid->clnt->dotu); if (err) { P9_DPRINTK(P9_DEBUG_VFS, "returned %d\n", err); err = -EIO; p9stat_free(&st); - goto free_and_exit; + goto unlock_and_exit; } - - i += st.size+2; - fid->rdir_fpos += st.size+2; + reclen = st.size+2; over = filldir(dirent, st.name, strlen(st.name), filp->f_pos, v9fs_qid2ino(&st.qid), dt_type(&st)); - filp->f_pos += st.size+2; - p9stat_free(&st); if (over) { err = 0; - goto free_and_exit; + goto unlock_and_exit; } + rdir->head += reclen; + filp->f_pos += reclen; } } -free_and_exit: - kfree(statbuf); +unlock_and_exit: + mutex_unlock(&rdir->mutex); +exit: return err; } diff --git a/include/net/9p/client.h b/include/net/9p/client.h index e268122..fb00b32 100644 --- a/include/net/9p/client.h +++ b/include/net/9p/client.h @@ -159,8 +159,7 @@ struct p9_client { * @qid: the &p9_qid server identifier this handle points to * @iounit: the server reported maximum transaction size for this file * @uid: the numeric uid of the local user who owns this handle - * @aux: transport specific information (unused?) - * @rdir_fpos: tracks offset of file position when reading directory contents + * @rdir: readdir accounting structure (allocated on demand) * @flist: per-client-instance fid tracking * @dlist: per-dentry fid tracking * @@ -174,9 +173,9 @@ struct p9_fid { struct p9_qid qid; u32 iounit; uid_t uid; - void *aux; - int rdir_fpos; + void *rdir; + struct list_head flist; struct list_head dlist; /* list of all fids attached to a dentry */ }; diff --git a/net/9p/client.c b/net/9p/client.c index 5bf5f22..8af95b2 100644 --- a/net/9p/client.c +++ b/net/9p/client.c @@ -582,11 +582,9 @@ static struct p9_fid *p9_fid_create(struct p9_client *clnt) memset(&fid->qid, 0, sizeof(struct p9_qid)); fid->mode = -1; - fid->rdir_fpos = 0; fid->uid = current_fsuid(); fid->clnt = clnt; - fid->aux = NULL; - + fid->rdir = NULL; spin_lock_irqsave(&clnt->lock, flags); list_add(&fid->flist, &clnt->fidlist); spin_unlock_irqrestore(&clnt->lock, flags); @@ -609,6 +607,7 @@ static void p9_fid_destroy(struct p9_fid *fid) spin_lock_irqsave(&clnt->lock, flags); list_del(&fid->flist); spin_unlock_irqrestore(&clnt->lock, flags); + kfree(fid->rdir); kfree(fid); } -- cgit v0.10.2 From 05154752cf3767c544b65b5e340793d40b3f1229 Mon Sep 17 00:00:00 2001 From: Gottfried Haider Date: Mon, 2 Nov 2009 11:51:11 +0100 Subject: x86: Add reboot quirk for 3 series Mac mini MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Reboot does not work out of the box on my "Early 2009" Mac mini (3,1). Detect this machine via DMI as we do for recent MacBooks. Signed-off-by: Gottfried Haider Cc: Ozan Çağlayan Cc: Paul Mackerras Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index a1a3cdd..f930787 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -436,6 +436,14 @@ static struct dmi_system_id __initdata pci_reboot_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5"), }, }, + { /* Handle problems with rebooting on Apple Macmini3,1 */ + .callback = set_pci_reboot, + .ident = "Apple Macmini3,1", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Macmini3,1"), + }, + }, { } }; -- cgit v0.10.2 From 49557e620339cb134127b5bfbcfecc06b77d0232 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Mon, 2 Nov 2009 20:37:20 +1030 Subject: sched: Fix boot crash by zalloc()ing most of the cpu masks I got a boot crash when forcing cpumasks offstack on 32 bit, because find_new_ilb() returned 3 on my UP system (nohz.cpu_mask wasn't zeroed). AFAICT the others need to be zeroed too: only nohz.ilb_grp_nohz_mask is initialized before use. Signed-off-by: Rusty Russell Cc: Peter Zijlstra LKML-Reference: <200911022037.21282.rusty@rustcorp.com.au> Signed-off-by: Ingo Molnar diff --git a/kernel/sched.c b/kernel/sched.c index cae6700..bf21adb 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -9535,13 +9535,13 @@ void __init sched_init(void) current->sched_class = &fair_sched_class; /* Allocate the nohz_cpu_mask if CONFIG_CPUMASK_OFFSTACK */ - alloc_cpumask_var(&nohz_cpu_mask, GFP_NOWAIT); + zalloc_cpumask_var(&nohz_cpu_mask, GFP_NOWAIT); #ifdef CONFIG_SMP #ifdef CONFIG_NO_HZ - alloc_cpumask_var(&nohz.cpu_mask, GFP_NOWAIT); + zalloc_cpumask_var(&nohz.cpu_mask, GFP_NOWAIT); alloc_cpumask_var(&nohz.ilb_grp_nohz_mask, GFP_NOWAIT); #endif - alloc_cpumask_var(&cpu_isolated_map, GFP_NOWAIT); + zalloc_cpumask_var(&cpu_isolated_map, GFP_NOWAIT); #endif /* SMP */ perf_event_init(); -- cgit v0.10.2 From b00bc0b237055b4c45816325ee14f0bd83e6f590 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 2 Nov 2009 13:01:56 +0100 Subject: uids: Prevent tear down race Ingo triggered the following warning: WARNING: at lib/debugobjects.c:255 debug_print_object+0x42/0x50() Hardware name: System Product Name ODEBUG: init active object type: timer_list Modules linked in: Pid: 2619, comm: dmesg Tainted: G W 2.6.32-rc5-tip+ #5298 Call Trace: [<81035443>] warn_slowpath_common+0x6a/0x81 [<8120e483>] ? debug_print_object+0x42/0x50 [<81035498>] warn_slowpath_fmt+0x29/0x2c [<8120e483>] debug_print_object+0x42/0x50 [<8120ec2a>] __debug_object_init+0x279/0x2d7 [<8120ecb3>] debug_object_init+0x13/0x18 [<810409d2>] init_timer_key+0x17/0x6f [<81041526>] free_uid+0x50/0x6c [<8104ed2d>] put_cred_rcu+0x61/0x72 [<81067fac>] rcu_do_batch+0x70/0x121 debugobjects warns about an enqueued timer being initialized. If CONFIG_USER_SCHED=y the user management code uses delayed work to remove the user from the hash table and tear down the sysfs objects. free_uid is called from RCU and initializes/schedules delayed work if the usage count of the user_struct is 0. The init/schedule happens outside of the uidhash_lock protected region which allows a concurrent caller of find_user() to reference the about to be destroyed user_struct w/o preventing the work from being scheduled. If the next free_uid call happens before the work timer expired then the active timer is initialized and the work scheduled again. The race was introduced in commit 5cb350ba (sched: group scheduling, sysfs tunables) and made more prominent by commit 3959214f (sched: delayed cleanup of user_struct) Move the init/schedule_delayed_work inside of the uidhash_lock protected region to prevent the race. Signed-off-by: Thomas Gleixner Acked-by: Dhaval Giani Cc: Paul E. McKenney Cc: Kay Sievers Cc: stable@kernel.org diff --git a/kernel/user.c b/kernel/user.c index 2c000e7..46d0165 100644 --- a/kernel/user.c +++ b/kernel/user.c @@ -330,9 +330,9 @@ done: */ static void free_user(struct user_struct *up, unsigned long flags) { - spin_unlock_irqrestore(&uidhash_lock, flags); INIT_DELAYED_WORK(&up->work, cleanup_user_struct); schedule_delayed_work(&up->work, msecs_to_jiffies(1000)); + spin_unlock_irqrestore(&uidhash_lock, flags); } #else /* CONFIG_USER_SCHED && CONFIG_SYSFS */ -- cgit v0.10.2 From 83f5b01ffbbaea6f97c9a79d21e240dbfb69f2f1 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Wed, 28 Oct 2009 08:14:49 -0700 Subject: rcu: Fix long-grace-period race between forcing and initialization Very long RCU read-side critical sections (50 milliseconds or so) can cause a race between force_quiescent_state() and rcu_start_gp() as follows on kernel builds with multi-level rcu_node hierarchies: 1. CPU 0 calls force_quiescent_state(), sees that there is a grace period in progress, and acquires ->fsqlock. 2. CPU 1 detects the end of the grace period, and so cpu_quiet_msk_finish() sets rsp->completed to rsp->gpnum. This operation is carried out under the root rnp->lock, but CPU 0 has not yet acquired that lock. Note that rsp->signaled is still RCU_SAVE_DYNTICK from the last grace period. 3. CPU 1 calls rcu_start_gp(), but no one wants a new grace period, so it drops the root rnp->lock and returns. 4. CPU 0 acquires the root rnp->lock and picks up rsp->completed and rsp->signaled, then drops rnp->lock. It then enters the RCU_SAVE_DYNTICK leg of the switch statement. 5. CPU 2 invokes call_rcu(), and now needs a new grace period. It calls rcu_start_gp(), which acquires the root rnp->lock, sets rsp->signaled to RCU_GP_INIT (too bad that CPU 0 is already in the RCU_SAVE_DYNTICK leg of the switch statement!) and starts initializing the rcu_node hierarchy. If there are multiple levels to the hierarchy, it will drop the root rnp->lock and initialize the lower levels of the hierarchy. 6. CPU 0 notes that rsp->completed has not changed, which permits both CPU 2 and CPU 0 to try updating it concurrently. If CPU 0's update prevails, later calls to force_quiescent_state() can count old quiescent states against the new grace period, which can in turn result in premature ending of grace periods. Not good. This patch adds an RCU_GP_IDLE state for rsp->signaled that is set initially at boot time and any time a grace period ends. This prevents CPU 0 from getting into the workings of force_quiescent_state() in step 4. Additional locking and checks prevent the concurrent update of rsp->signaled in step 6. Signed-off-by: Paul E. McKenney Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <1256742889199-git-send-email-> Signed-off-by: Ingo Molnar diff --git a/kernel/rcutree.c b/kernel/rcutree.c index 0536125..f3077c0 100644 --- a/kernel/rcutree.c +++ b/kernel/rcutree.c @@ -59,7 +59,7 @@ NUM_RCU_LVL_2, \ NUM_RCU_LVL_3, /* == MAX_RCU_LVLS */ \ }, \ - .signaled = RCU_SIGNAL_INIT, \ + .signaled = RCU_GP_IDLE, \ .gpnum = -300, \ .completed = -300, \ .onofflock = __SPIN_LOCK_UNLOCKED(&name.onofflock), \ @@ -657,14 +657,17 @@ rcu_start_gp(struct rcu_state *rsp, unsigned long flags) * irqs disabled. */ rcu_for_each_node_breadth_first(rsp, rnp) { - spin_lock(&rnp->lock); /* irqs already disabled. */ + spin_lock(&rnp->lock); /* irqs already disabled. */ rcu_preempt_check_blocked_tasks(rnp); rnp->qsmask = rnp->qsmaskinit; rnp->gpnum = rsp->gpnum; - spin_unlock(&rnp->lock); /* irqs already disabled. */ + spin_unlock(&rnp->lock); /* irqs remain disabled. */ } + rnp = rcu_get_root(rsp); + spin_lock(&rnp->lock); /* irqs already disabled. */ rsp->signaled = RCU_SIGNAL_INIT; /* force_quiescent_state now OK. */ + spin_unlock(&rnp->lock); /* irqs remain disabled. */ spin_unlock_irqrestore(&rsp->onofflock, flags); } @@ -706,6 +709,7 @@ static void cpu_quiet_msk_finish(struct rcu_state *rsp, unsigned long flags) { WARN_ON_ONCE(!rcu_gp_in_progress(rsp)); rsp->completed = rsp->gpnum; + rsp->signaled = RCU_GP_IDLE; rcu_process_gp_end(rsp, rsp->rda[smp_processor_id()]); rcu_start_gp(rsp, flags); /* releases root node's rnp->lock. */ } @@ -1162,9 +1166,10 @@ static void force_quiescent_state(struct rcu_state *rsp, int relaxed) } spin_unlock(&rnp->lock); switch (signaled) { + case RCU_GP_IDLE: case RCU_GP_INIT: - break; /* grace period still initializing, ignore. */ + break; /* grace period idle or initializing, ignore. */ case RCU_SAVE_DYNTICK: @@ -1178,7 +1183,8 @@ static void force_quiescent_state(struct rcu_state *rsp, int relaxed) /* Update state, record completion counter. */ spin_lock(&rnp->lock); - if (lastcomp == rsp->completed) { + if (lastcomp == rsp->completed && + rsp->signaled == RCU_SAVE_DYNTICK) { rsp->signaled = RCU_FORCE_QS; dyntick_record_completed(rsp, lastcomp); } diff --git a/kernel/rcutree.h b/kernel/rcutree.h index 1823c6e..1899023 100644 --- a/kernel/rcutree.h +++ b/kernel/rcutree.h @@ -201,9 +201,10 @@ struct rcu_data { }; /* Values for signaled field in struct rcu_state. */ -#define RCU_GP_INIT 0 /* Grace period being initialized. */ -#define RCU_SAVE_DYNTICK 1 /* Need to scan dyntick state. */ -#define RCU_FORCE_QS 2 /* Need to force quiescent state. */ +#define RCU_GP_IDLE 0 /* No grace period in progress. */ +#define RCU_GP_INIT 1 /* Grace period being initialized. */ +#define RCU_SAVE_DYNTICK 2 /* Need to scan dyntick state. */ +#define RCU_FORCE_QS 3 /* Need to force quiescent state. */ #ifdef CONFIG_NO_HZ #define RCU_SIGNAL_INIT RCU_SAVE_DYNTICK #else /* #ifdef CONFIG_NO_HZ */ -- cgit v0.10.2 From dd77038d233d106f297b907bf51459dfb1099eb1 Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Fri, 30 Oct 2009 19:32:25 -0200 Subject: perf_events: Fix some typo in the perf events config description Signed-off-by: Thadeu Lima de Souza Cascardo Cc: trivial@kernel.org LKML-Reference: <1256938346-8230-1-git-send-email-cascardo@holoscopio.com> Signed-off-by: Ingo Molnar diff --git a/init/Kconfig b/init/Kconfig index 09c5c64..3b8c7bc 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -937,7 +937,7 @@ config PERF_EVENTS Enable kernel support for various performance events provided by software and hardware. - Software events are supported either build-in or via the + Software events are supported either built-in or via the use of generic tracepoints. Most modern CPUs support performance events via performance @@ -949,7 +949,7 @@ config PERF_EVENTS used to profile the code that runs on that CPU. The Linux Performance Event subsystem provides an abstraction of - these software and hardware cevent apabilities, available via a + these software and hardware event capabilities, available via a system call and used by the "perf" utility in tools/perf/. It provides per task and per CPU counters, and it provides event capabilities on top of those. -- cgit v0.10.2 From 6603a4fd5195a004dec5f9568e38ff76bae630c1 Mon Sep 17 00:00:00 2001 From: Claudio Scordino Date: Fri, 30 Oct 2009 12:06:05 +0100 Subject: ARM: 5776/1: Check compiler version and EABI support when adding ARM unwind support. ARM unwind is known to compile only with EABI and not-buggy compilers. The problem is not the unwinding information but the -fno-frame-pointer option added as a result of !CONFIG_FRAME_POINTER. Now we check the compiler and raise a #warning in case of wrong compiler. Signed-off-by: Claudio Scordino Signed-off-by: Russell King diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c index 39baf11..786ac2b 100644 --- a/arch/arm/kernel/unwind.c +++ b/arch/arm/kernel/unwind.c @@ -26,6 +26,15 @@ * http://infocenter.arm.com/help/topic/com.arm.doc.subset.swdev.abi/index.html */ +#if !defined (__ARM_EABI__) +#warning Your compiler does not have EABI support. +#warning ARM unwind is known to compile only with EABI compilers. +#warning Change compiler or disable ARM_UNWIND option. +#elif (__GNUC__ == 4 && __GNUC_MINOR__ <= 2) +#warning Your compiler is too buggy; it is known to not compile ARM unwind support. +#warning Change compiler or disable ARM_UNWIND option. +#endif + #include #include #include -- cgit v0.10.2 From 4b46d6416548fb6a0940dfd9911fd895eb6247b3 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 1 Nov 2009 17:44:24 +0000 Subject: ARM: ensure initial page tables are setup for SMP systems Mapping the same memory using two different attributes (memory type, shareability, cacheability) is unpredictable. During boot, we encounter a situation when we're updating the kernel's page tables which can lead to dirty cache lines existing in the cache which are subsequently missed. This causes stack corruption, and therefore a crash. Therefore, ensure that the shared and cacheability settings matches the configuration that will be used later; this together with the restriction in early_cachepolicy() ensures that we won't create a mismatch during boot. Acked-by: Catalin Marinas Signed-off-by: Russell King diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 02243ee..ea67be0 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -117,6 +117,13 @@ static void __init early_cachepolicy(char **p) } if (i == ARRAY_SIZE(cache_policies)) printk(KERN_ERR "ERROR: unknown or unsupported cache policy\n"); + /* + * This restriction is partly to do with the way we boot; it is + * unpredictable to have memory mapped using two different sets of + * memory attributes (shared, type, and cache attribs). We can not + * change these attributes once the initial assembly has setup the + * page tables. + */ if (cpu_architecture() >= CPU_ARCH_ARMv6) { printk(KERN_WARNING "Only cachepolicy=writeback supported on ARMv6 and later\n"); cachepolicy = CPOLICY_WRITEBACK; diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 194737d..70f75d2 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -32,8 +32,10 @@ #ifndef CONFIG_SMP #define TTB_FLAGS TTB_RGN_WBWA +#define PMD_FLAGS PMD_SECT_WB #else #define TTB_FLAGS TTB_RGN_WBWA|TTB_S +#define PMD_FLAGS PMD_SECT_WBWA|PMD_SECT_S #endif ENTRY(cpu_v6_proc_init) @@ -222,10 +224,9 @@ __v6_proc_info: .long 0x0007b000 .long 0x0007f000 .long PMD_TYPE_SECT | \ - PMD_SECT_BUFFERABLE | \ - PMD_SECT_CACHEABLE | \ PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ + PMD_SECT_AP_READ | \ + PMD_FLAGS .long PMD_TYPE_SECT | \ PMD_SECT_XN | \ PMD_SECT_AP_WRITE | \ diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 23ebcf6..eeeed01 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -33,9 +33,11 @@ #ifndef CONFIG_SMP /* PTWs cacheable, inner WB not shareable, outer WB not shareable */ #define TTB_FLAGS TTB_IRGN_WB|TTB_RGN_OC_WB +#define PMD_FLAGS PMD_SECT_WB #else /* PTWs cacheable, inner WBWA shareable, outer WBWA not shareable */ #define TTB_FLAGS TTB_IRGN_WBWA|TTB_S|TTB_NOS|TTB_RGN_OC_WBWA +#define PMD_FLAGS PMD_SECT_WBWA|PMD_SECT_S #endif ENTRY(cpu_v7_proc_init) @@ -326,10 +328,9 @@ __v7_proc_info: .long 0x000f0000 @ Required ID value .long 0x000f0000 @ Mask for ID .long PMD_TYPE_SECT | \ - PMD_SECT_BUFFERABLE | \ - PMD_SECT_CACHEABLE | \ PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ + PMD_SECT_AP_READ | \ + PMD_FLAGS .long PMD_TYPE_SECT | \ PMD_SECT_XN | \ PMD_SECT_AP_WRITE | \ -- cgit v0.10.2 From e8c93fc7b7221b6ac7e7ddbd0e21e205bf9e801a Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Mon, 2 Nov 2009 09:23:08 -0800 Subject: Revert "[IA64] fix percpu warnings" This reverts commit b94b08081fcecf83fa690d6c5664f6316fe72208. genksyms currently cannot handle complicated types for exported percpu variables. Drop this patch for now as it prevents a module from being loaded on sn2 systems: xpc: no symbol version for per_cpu____sn_cnodeid_to_nasid xpc: Unknown symbol per_cpu____sn_cnodeid_to_nasid Signed-off-by: Tony Luck diff --git a/arch/ia64/include/asm/sn/arch.h b/arch/ia64/include/asm/sn/arch.h index f5f493b..7caa1f4 100644 --- a/arch/ia64/include/asm/sn/arch.h +++ b/arch/ia64/include/asm/sn/arch.h @@ -71,7 +71,7 @@ DECLARE_PER_CPU(struct sn_hub_info_s, __sn_hub_info); * Compact node ID to nasid mappings kept in the per-cpu data areas of each * cpu. */ -DECLARE_PER_CPU(short [MAX_COMPACT_NODES], __sn_cnodeid_to_nasid); +DECLARE_PER_CPU(short, __sn_cnodeid_to_nasid[MAX_COMPACT_NODES]); #define sn_cnodeid_to_nasid (&__get_cpu_var(__sn_cnodeid_to_nasid[0])) -- cgit v0.10.2 From c9354c85c1c7bac788ce57d3c17f2016c1c45b1d Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 2 Nov 2009 09:29:55 -0800 Subject: i915: fix intel graphics suspend breakage due to resume/lid event confusion In commit c1c7af60892070e4b82ad63bbfb95ae745056de0 ("drm/i915: force mode set at lid open time") the intel graphics driver was taught to restore the LVDS mode on lid open. That caused problems with interaction with the suspend/resume code, which commonly runs at the same time (suspend is often caused by the lid close event, while lid open is commonly a resume event), which was worked around with in commit 06891e27a9b5dba5268bb80e41a283f51335afe7 ("drm/i915: fix suspend/resume breakage in lid notifier"). However, in the meantime the lid event code had also grown a user event notifier (commit 06324194eee97a51b5f172270df49ec39192d6cc: "drm/i915: generate a KMS uevent at lid open/close time"), and now _that_ causes problems with suspend/resume and some versions of Xorg reacting to those uevents by setting the mode. So this effectively reverts that commit 06324194ee, and makes the lid open protection logic against suspend/resume more explicit. This fixes at least one laptop. See http://bugzilla.kernel.org/show_bug.cgi?id=14484 for more details. Acked-by: Jesse Barnes Cc: Riccardo Magliocchetti Cc: Eric Anholt Signed-off-by: Linus Torvalds diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index b93814c..7f436ec 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -89,7 +89,8 @@ static int i915_suspend(struct drm_device *dev, pm_message_t state) pci_set_power_state(dev->pdev, PCI_D3hot); } - dev_priv->suspended = 1; + /* Modeset on resume, not lid events */ + dev_priv->modeset_on_lid = 0; return 0; } @@ -124,7 +125,7 @@ static int i915_resume(struct drm_device *dev) drm_helper_resume_force_mode(dev); } - dev_priv->suspended = 0; + dev_priv->modeset_on_lid = 0; return ret; } diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 6035d3d..c5df223 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -274,7 +274,7 @@ typedef struct drm_i915_private { struct drm_i915_display_funcs display; /* Register state */ - bool suspended; + bool modeset_on_lid; u8 saveLBB; u32 saveDSPACNTR; u32 saveDSPBCNTR; diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 98ae3d7..808bbe4 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -656,6 +656,15 @@ static int intel_lvds_get_modes(struct drm_connector *connector) return 0; } +/* + * Lid events. Note the use of 'modeset_on_lid': + * - we set it on lid close, and reset it on open + * - we use it as a "only once" bit (ie we ignore + * duplicate events where it was already properly + * set/reset) + * - the suspend/resume paths will also set it to + * zero, since they restore the mode ("lid open"). + */ static int intel_lid_notify(struct notifier_block *nb, unsigned long val, void *unused) { @@ -663,13 +672,19 @@ static int intel_lid_notify(struct notifier_block *nb, unsigned long val, container_of(nb, struct drm_i915_private, lid_notifier); struct drm_device *dev = dev_priv->dev; - if (acpi_lid_open() && !dev_priv->suspended) { - mutex_lock(&dev->mode_config.mutex); - drm_helper_resume_force_mode(dev); - mutex_unlock(&dev->mode_config.mutex); + if (!acpi_lid_open()) { + dev_priv->modeset_on_lid = 1; + return NOTIFY_OK; } - drm_sysfs_hotplug_event(dev_priv->dev); + if (!dev_priv->modeset_on_lid) + return NOTIFY_OK; + + dev_priv->modeset_on_lid = 0; + + mutex_lock(&dev->mode_config.mutex); + drm_helper_resume_force_mode(dev); + mutex_unlock(&dev->mode_config.mutex); return NOTIFY_OK; } -- cgit v0.10.2 From 32c5fc10e79a7053ac5728b01a0bff55cbcb9d49 Mon Sep 17 00:00:00 2001 From: Bo Liu Date: Mon, 2 Nov 2009 16:50:33 +0000 Subject: mm: remove incorrect swap_count() from try_to_unuse() In try_to_unuse(), swcount is a local copy of *swap_map, including the SWAP_HAS_CACHE bit; but a wrong comparison against swap_count(*swap_map), which masks off the SWAP_HAS_CACHE bit, succeeded where it should fail. That had the effect of resetting the mm from which to start searching for the next swap page, to an irrelevant mm instead of to an mm in which this swap page had been found: which may increase search time by ~20%. But we're used to swapoff being slow, so never noticed the slowdown. Remove that one spurious use of swap_count(): Bo Liu thought it merely redundant, Hugh rewrote the description since it was measurably wrong. Signed-off-by: Bo Liu Signed-off-by: Hugh Dickins Reviewed-by: KAMEZAWA Hiroyuki Cc: stable@kernel.org Signed-off-by: Linus Torvalds diff --git a/mm/swapfile.c b/mm/swapfile.c index a1bc6b9..9c590ee 100644 --- a/mm/swapfile.c +++ b/mm/swapfile.c @@ -1151,8 +1151,7 @@ static int try_to_unuse(unsigned int type) } else retval = unuse_mm(mm, entry, page); - if (set_start_mm && - swap_count(*swap_map) < swcount) { + if (set_start_mm && *swap_map < swcount) { mmput(new_start_mm); atomic_inc(&mm->mm_users); new_start_mm = mm; -- cgit v0.10.2 From d4da6c9ccf648f3f1cb5bf9d981a62c253d30e28 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 2 Nov 2009 10:15:27 -0800 Subject: Revert "ext4: Remove journal_checksum mount option and enable it by default" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit d0646f7b636d067d715fab52a2ba9c6f0f46b0d7, as requested by Eric Sandeen. It can basically cause an ext4 filesystem to miss recovery (and thus get mounted with errors) if the journal checksum does not match. Quoth Eric: "My hand-wavy hunch about what is happening is that we're finding a bad checksum on the last partially-written transaction, which is not surprising, but if we have a wrapped log and we're doing the initial scan for head/tail, and we abort scanning on that bad checksum, then we are essentially running an unrecovered filesystem. But that's hand-wavy and I need to go look at the code. We lived without journal checksums on by default until now, and at this point they're doing more harm than good, so we should revert the default-changing commit until we can fix it and do some good power-fail testing with the fixes in place." See http://bugzilla.kernel.org/show_bug.cgi?id=14354 for all the gory details. Requested-by: Eric Sandeen Cc: Theodore Tso Cc: Alexey Fisher Cc: Maxim Levitsky Cc: Aneesh Kumar K.V Cc: Mathias Burén Signed-off-by: Linus Torvalds diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt index bf4f4b7..6d94e06 100644 --- a/Documentation/filesystems/ext4.txt +++ b/Documentation/filesystems/ext4.txt @@ -134,9 +134,15 @@ ro Mount filesystem read only. Note that ext4 will mount options "ro,noload" can be used to prevent writes to the filesystem. +journal_checksum Enable checksumming of the journal transactions. + This will allow the recovery code in e2fsck and the + kernel to detect corruption in the kernel. It is a + compatible change and will be ignored by older kernels. + journal_async_commit Commit block can be written to disk without waiting for descriptor blocks. If enabled older kernels cannot - mount the device. + mount the device. This will enable 'journal_checksum' + internally. journal=update Update the ext4 file system's journal to the current format. diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index 984ca0c..00d153f 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -743,6 +743,7 @@ struct ext4_inode_info { #define EXT4_MOUNT_QUOTA 0x80000 /* Some quota option set */ #define EXT4_MOUNT_USRQUOTA 0x100000 /* "old" user quota */ #define EXT4_MOUNT_GRPQUOTA 0x200000 /* "old" group quota */ +#define EXT4_MOUNT_JOURNAL_CHECKSUM 0x800000 /* Journal checksums */ #define EXT4_MOUNT_JOURNAL_ASYNC_COMMIT 0x1000000 /* Journal Async Commit */ #define EXT4_MOUNT_I_VERSION 0x2000000 /* i_version support */ #define EXT4_MOUNT_DELALLOC 0x8000000 /* Delalloc support */ diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 312211e..d4ca92a 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -1300,9 +1300,11 @@ static int parse_options(char *options, struct super_block *sb, *journal_devnum = option; break; case Opt_journal_checksum: - break; /* Kept for backwards compatibility */ + set_opt(sbi->s_mount_opt, JOURNAL_CHECKSUM); + break; case Opt_journal_async_commit: set_opt(sbi->s_mount_opt, JOURNAL_ASYNC_COMMIT); + set_opt(sbi->s_mount_opt, JOURNAL_CHECKSUM); break; case Opt_noload: set_opt(sbi->s_mount_opt, NOLOAD); @@ -2759,14 +2761,20 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent) goto failed_mount4; } - jbd2_journal_set_features(sbi->s_journal, - JBD2_FEATURE_COMPAT_CHECKSUM, 0, 0); - if (test_opt(sb, JOURNAL_ASYNC_COMMIT)) - jbd2_journal_set_features(sbi->s_journal, 0, 0, + if (test_opt(sb, JOURNAL_ASYNC_COMMIT)) { + jbd2_journal_set_features(sbi->s_journal, + JBD2_FEATURE_COMPAT_CHECKSUM, 0, JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT); - else + } else if (test_opt(sb, JOURNAL_CHECKSUM)) { + jbd2_journal_set_features(sbi->s_journal, + JBD2_FEATURE_COMPAT_CHECKSUM, 0, 0); jbd2_journal_clear_features(sbi->s_journal, 0, 0, JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT); + } else { + jbd2_journal_clear_features(sbi->s_journal, + JBD2_FEATURE_COMPAT_CHECKSUM, 0, + JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT); + } /* We have now updated the journal if required, so we can * validate the data journaling mode. */ -- cgit v0.10.2 From 7400f42e9d765fa0656b432f3ab1245f9710f190 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sat, 31 Oct 2009 07:40:37 +0100 Subject: cfg80211: fix NULL ptr deref commit 211a4d12abf86fe0df4cd68fc6327cbb58f56f81 Author: Johannes Berg Date: Tue Oct 20 15:08:53 2009 +0900 cfg80211: sme: deauthenticate on assoc failure introduced a potential NULL pointer dereference that some people have been hitting for some reason -- the params.bssid pointer is not guaranteed to be non-NULL for what seems to be a race between various ways of reaching the same thing. While I'm trying to analyse the problem more let's first fix the crash. I think the real fix may be to avoid doing _anything_ if it ended up being NULL, but right now I'm not sure yet. I think http://bugzilla.kernel.org/show_bug.cgi?id=14342 might also be this issue. Reported-by: Parag Warudkar Tested-by: Parag Warudkar Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/wireless/sme.c b/net/wireless/sme.c index ece378d..9f0b280 100644 --- a/net/wireless/sme.c +++ b/net/wireless/sme.c @@ -165,7 +165,7 @@ void cfg80211_conn_work(struct work_struct *work) struct cfg80211_registered_device *rdev = container_of(work, struct cfg80211_registered_device, conn_work); struct wireless_dev *wdev; - u8 bssid[ETH_ALEN]; + u8 bssid_buf[ETH_ALEN], *bssid = NULL; rtnl_lock(); cfg80211_lock_rdev(rdev); @@ -181,7 +181,10 @@ void cfg80211_conn_work(struct work_struct *work) wdev_unlock(wdev); continue; } - memcpy(bssid, wdev->conn->params.bssid, ETH_ALEN); + if (wdev->conn->params.bssid) { + memcpy(bssid_buf, wdev->conn->params.bssid, ETH_ALEN); + bssid = bssid_buf; + } if (cfg80211_conn_do_work(wdev)) __cfg80211_connect_result( wdev->netdev, bssid, -- cgit v0.10.2 From c1f9a764cf47686b1f5a0cf87ada68d90056136a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sun, 1 Nov 2009 19:25:40 +0100 Subject: mac80211: check interface is down before type change For some strange reason the netif_running() check ended up after the actual type change instead of before, potentially causing all kinds of problems if the interface is up while changing the type; one of the problems manifests itself as a warning: WARNING: at net/mac80211/iface.c:651 ieee80211_teardown_sdata+0xda/0x1a0 [mac80211]() Hardware name: Aspire one Pid: 2596, comm: wpa_supplicant Tainted: G W 2.6.31-10-generic #32-Ubuntu Call Trace: [] warn_slowpath_common+0x6d/0xa0 [] warn_slowpath_null+0x15/0x20 [] ieee80211_teardown_sdata+0xda/0x1a0 [mac80211] [] ieee80211_if_change_type+0x4a/0xc0 [mac80211] [] ieee80211_change_iface+0x61/0xa0 [mac80211] [] cfg80211_wext_siwmode+0xc7/0x120 [cfg80211] [] ioctl_standard_call+0x58/0xf0 (http://www.kerneloops.org/searchweek.php?search=ieee80211_teardown_sdata) Cc: Arjan van de Ven Cc: stable@kernel.org Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 5608f6c..7b5131b 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -72,6 +72,9 @@ static int ieee80211_change_iface(struct wiphy *wiphy, struct ieee80211_sub_if_data *sdata; int ret; + if (netif_running(dev)) + return -EBUSY; + if (!nl80211_type_check(type)) return -EINVAL; @@ -81,9 +84,6 @@ static int ieee80211_change_iface(struct wiphy *wiphy, if (ret) return ret; - if (netif_running(sdata->dev)) - return -EBUSY; - if (ieee80211_vif_is_mesh(&sdata->vif) && params->mesh_id_len) ieee80211_sdata_set_mesh_id(sdata, params->mesh_id_len, -- cgit v0.10.2 From 43309f3b521302bb66c4c9e66704dd3675e4d725 Mon Sep 17 00:00:00 2001 From: Richard Zhao Date: Sat, 17 Oct 2009 17:46:22 +0800 Subject: i2c: imx: check busy bit when START/STOP The controller can't do anything else before it actually generates START/STOP. So we check busy bit to make sure START/STOP is successfully finished. If we don't check busy bit, START/STOP may fail on some fast CPUs. Signed-off-by: Richard Zhao Signed-off-by: Ben Dooks diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index 4afba3e..6055e92 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -120,19 +120,25 @@ struct imx_i2c_struct { wait_queue_head_t queue; unsigned long i2csr; unsigned int disable_delay; + int stopped; }; /** Functions for IMX I2C adapter driver *************************************** *******************************************************************************/ -static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx) +static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy) { unsigned long orig_jiffies = jiffies; + unsigned int temp; dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__); - /* wait for bus not busy */ - while (readb(i2c_imx->base + IMX_I2C_I2SR) & I2SR_IBB) { + while (1) { + temp = readb(i2c_imx->base + IMX_I2C_I2SR); + if (for_busy && (temp & I2SR_IBB)) + break; + if (!for_busy && !(temp & I2SR_IBB)) + break; if (signal_pending(current)) { dev_dbg(&i2c_imx->adapter.dev, "<%s> I2C Interrupted\n", __func__); @@ -179,39 +185,55 @@ static int i2c_imx_acked(struct imx_i2c_struct *i2c_imx) return 0; } -static void i2c_imx_start(struct imx_i2c_struct *i2c_imx) +static int i2c_imx_start(struct imx_i2c_struct *i2c_imx) { unsigned int temp = 0; + int result; dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__); /* Enable I2C controller */ + writeb(0, i2c_imx->base + IMX_I2C_I2SR); writeb(I2CR_IEN, i2c_imx->base + IMX_I2C_I2CR); + + /* Wait controller to be stable */ + udelay(50); + /* Start I2C transaction */ temp = readb(i2c_imx->base + IMX_I2C_I2CR); temp |= I2CR_MSTA; writeb(temp, i2c_imx->base + IMX_I2C_I2CR); + result = i2c_imx_bus_busy(i2c_imx, 1); + if (result) + return result; + i2c_imx->stopped = 0; + temp |= I2CR_IIEN | I2CR_MTX | I2CR_TXAK; writeb(temp, i2c_imx->base + IMX_I2C_I2CR); + return result; } static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx) { unsigned int temp = 0; - /* Stop I2C transaction */ - dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__); - temp = readb(i2c_imx->base + IMX_I2C_I2CR); - temp &= ~I2CR_MSTA; - writeb(temp, i2c_imx->base + IMX_I2C_I2CR); - /* setup chip registers to defaults */ - writeb(I2CR_IEN, i2c_imx->base + IMX_I2C_I2CR); - writeb(0, i2c_imx->base + IMX_I2C_I2SR); + if (!i2c_imx->stopped) { + /* Stop I2C transaction */ + dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__); + temp = readb(i2c_imx->base + IMX_I2C_I2CR); + temp &= ~(I2CR_MSTA | I2CR_MTX); + writeb(temp, i2c_imx->base + IMX_I2C_I2CR); + i2c_imx->stopped = 1; + } /* * This delay caused by an i.MXL hardware bug. * If no (or too short) delay, no "STOP" bit will be generated. */ udelay(i2c_imx->disable_delay); + + if (!i2c_imx->stopped) + i2c_imx_bus_busy(i2c_imx, 0); + /* Disable I2C controller */ writeb(0, i2c_imx->base + IMX_I2C_I2CR); } @@ -341,11 +363,15 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs) if (result) return result; if (i == (msgs->len - 1)) { + /* It must generate STOP before read I2DR to prevent + controller from generating another clock cycle */ dev_dbg(&i2c_imx->adapter.dev, "<%s> clear MSTA\n", __func__); temp = readb(i2c_imx->base + IMX_I2C_I2CR); - temp &= ~I2CR_MSTA; + temp &= ~(I2CR_MSTA | I2CR_MTX); writeb(temp, i2c_imx->base + IMX_I2C_I2CR); + i2c_imx_bus_busy(i2c_imx, 0); + i2c_imx->stopped = 1; } else if (i == (msgs->len - 2)) { dev_dbg(&i2c_imx->adapter.dev, "<%s> set TXAK\n", __func__); @@ -370,14 +396,11 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter, dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__); - /* Check if i2c bus is not busy */ - result = i2c_imx_bus_busy(i2c_imx); + /* Start I2C transfer */ + result = i2c_imx_start(i2c_imx); if (result) goto fail0; - /* Start I2C transfer */ - i2c_imx_start(i2c_imx); - /* read/write data */ for (i = 0; i < num; i++) { if (i) { @@ -386,6 +409,9 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter, temp = readb(i2c_imx->base + IMX_I2C_I2CR); temp |= I2CR_RSTA; writeb(temp, i2c_imx->base + IMX_I2C_I2CR); + result = i2c_imx_bus_busy(i2c_imx, 1); + if (result) + goto fail0; } dev_dbg(&i2c_imx->adapter.dev, "<%s> transfer message: %d\n", __func__, i); -- cgit v0.10.2 From a4094a76e6a45691b8f9108060b750a48b4c4563 Mon Sep 17 00:00:00 2001 From: Richard Zhao Date: Sat, 17 Oct 2009 17:46:23 +0800 Subject: i2c: imx: only imx1 needs disable delay check cpu_is_mx1() when disable delay. Signed-off-by: Richard Zhao Signed-off-by: Ben Dooks diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index 6055e92..671d37c 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -225,11 +225,13 @@ static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx) writeb(temp, i2c_imx->base + IMX_I2C_I2CR); i2c_imx->stopped = 1; } - /* - * This delay caused by an i.MXL hardware bug. - * If no (or too short) delay, no "STOP" bit will be generated. - */ - udelay(i2c_imx->disable_delay); + if (cpu_is_mx1()) { + /* + * This delay caused by an i.MXL hardware bug. + * If no (or too short) delay, no "STOP" bit will be generated. + */ + udelay(i2c_imx->disable_delay); + } if (!i2c_imx->stopped) i2c_imx_bus_busy(i2c_imx, 0); -- cgit v0.10.2 From db3a3d4ef7f676501325ae9c7ce0c193c2c1b28f Mon Sep 17 00:00:00 2001 From: Richard Zhao Date: Sat, 17 Oct 2009 17:46:24 +0800 Subject: i2c: imx: disable clock when it's possible to save power. Enable clock before START, disable it after STOP. Signed-off-by: Richard Zhao Signed-off-by: Ben Dooks diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index 671d37c..e3654d6 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -121,6 +121,7 @@ struct imx_i2c_struct { unsigned long i2csr; unsigned int disable_delay; int stopped; + unsigned int ifdr; /* IMX_I2C_IFDR */ }; /** Functions for IMX I2C adapter driver *************************************** @@ -192,6 +193,8 @@ static int i2c_imx_start(struct imx_i2c_struct *i2c_imx) dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__); + clk_enable(i2c_imx->clk); + writeb(i2c_imx->ifdr, i2c_imx->base + IMX_I2C_IFDR); /* Enable I2C controller */ writeb(0, i2c_imx->base + IMX_I2C_I2SR); writeb(I2CR_IEN, i2c_imx->base + IMX_I2C_I2CR); @@ -238,6 +241,7 @@ static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx) /* Disable I2C controller */ writeb(0, i2c_imx->base + IMX_I2C_I2CR); + clk_disable(i2c_imx->clk); } static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx, @@ -257,8 +261,8 @@ static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx, else for (i = 0; i2c_clk_div[i][0] < div; i++); - /* Write divider value to register */ - writeb(i2c_clk_div[i][1], i2c_imx->base + IMX_I2C_IFDR); + /* Store divider value */ + i2c_imx->ifdr = i2c_clk_div[i][1]; /* * There dummy delay is calculated. @@ -528,7 +532,6 @@ static int __init i2c_imx_probe(struct platform_device *pdev) dev_err(&pdev->dev, "can't get I2C clock\n"); goto fail3; } - clk_enable(i2c_imx->clk); /* Request IRQ */ ret = request_irq(i2c_imx->irq, i2c_imx_isr, 0, pdev->name, i2c_imx); @@ -577,7 +580,6 @@ static int __init i2c_imx_probe(struct platform_device *pdev) fail5: free_irq(i2c_imx->irq, i2c_imx); fail4: - clk_disable(i2c_imx->clk); clk_put(i2c_imx->clk); fail3: release_mem_region(i2c_imx->res->start, resource_size(res)); @@ -614,8 +616,6 @@ static int __exit i2c_imx_remove(struct platform_device *pdev) if (pdata && pdata->exit) pdata->exit(&pdev->dev); - /* Disable I2C clock */ - clk_disable(i2c_imx->clk); clk_put(i2c_imx->clk); release_mem_region(i2c_imx->res->start, resource_size(i2c_imx->res)); -- cgit v0.10.2 From 45da790ebe746bb29f7e4adf806c020db6ff7755 Mon Sep 17 00:00:00 2001 From: Joakim Tjernlund Date: Tue, 13 Oct 2009 10:12:03 +0200 Subject: i2c-mpc: Do not generate STOP after read. The driver always ends a read with a STOP condition which breaks subsequent I2C reads/writes in the same transaction as these expect to do a repeated START(ReSTART). This will also help I2C multimaster as the bus will not be released after the first read, but when the whole transaction ends. Signed-off-by: Joakim Tjernlund Signed-off-by: Ben Dooks diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c index d325e86..f627001 100644 --- a/drivers/i2c/busses/i2c-mpc.c +++ b/drivers/i2c/busses/i2c-mpc.c @@ -365,9 +365,6 @@ static int mpc_write(struct mpc_i2c *i2c, int target, unsigned timeout = i2c->adap.timeout; u32 flags = restart ? CCR_RSTA : 0; - /* Start with MEN */ - if (!restart) - writeccr(i2c, CCR_MEN); /* Start as master */ writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_MTX | flags); /* Write target byte */ @@ -396,9 +393,6 @@ static int mpc_read(struct mpc_i2c *i2c, int target, int i, result; u32 flags = restart ? CCR_RSTA : 0; - /* Start with MEN */ - if (!restart) - writeccr(i2c, CCR_MEN); /* Switch to read - restart */ writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_MTX | flags); /* Write target address byte - this time with the read flag set */ @@ -425,9 +419,9 @@ static int mpc_read(struct mpc_i2c *i2c, int target, /* Generate txack on next to last byte */ if (i == length - 2) writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_TXAK); - /* Generate stop on last byte */ + /* Do not generate stop on last byte */ if (i == length - 1) - writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_TXAK); + writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_MTX); data[i] = readb(i2c->base + MPC_I2C_DR); } -- cgit v0.10.2 From fa5d11133b07053270e18fa9c18560e66e79217e Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Mon, 2 Nov 2009 18:50:49 -0500 Subject: ext4: discard preallocation when restarting a transaction during truncate When restart a transaction during a truncate operation, we drop and reacquire i_data_sem. After reacquiring i_data_sem, we need to discard any inode-based preallocation that might have been grabbed while we released i_data_sem (for example, if pdflush is allocating blocks and racing against the truncate). Signed-off-by: Aneesh Kumar K.V Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 5c5bc5d..d1ec698 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -193,7 +193,7 @@ static int try_to_extend_transaction(handle_t *handle, struct inode *inode) * so before we call here everything must be consistently dirtied against * this transaction. */ - int ext4_truncate_restart_trans(handle_t *handle, struct inode *inode, +int ext4_truncate_restart_trans(handle_t *handle, struct inode *inode, int nblocks) { int ret; @@ -209,6 +209,7 @@ static int try_to_extend_transaction(handle_t *handle, struct inode *inode) up_write(&EXT4_I(inode)->i_data_sem); ret = ext4_journal_restart(handle, blocks_for_truncate(inode)); down_write(&EXT4_I(inode)->i_data_sem); + ext4_discard_preallocations(inode); return ret; } -- cgit v0.10.2 From 5e0fa3f63eda875cbe23be37d64a16c65a577209 Mon Sep 17 00:00:00 2001 From: Stanislav Brabec Date: Thu, 22 Oct 2009 23:05:03 +0200 Subject: [ARM] pxa/zaurus: fix NAND flash OOB layout for Borzoi Borzoi, Terrier and Akita use the same NAND Flash OOB layout, which seems to be different from Spitz for some reason. Here is a fix. When the code was ported to the platform data, the map was applied just for Akita. After this patch, Flash works again on Borzoi. Terrier still has a problem with partition table different from Borzoi (unfixable without reading of the system configuration in flash) and JFFS2 partitions can be mounted (with some "Empty flash at ... ends at ..." in the syslog). Signed-off-by: Stanislav Brabec Acked-by: Richard Purdie Signed-off-by: Eric Miao diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 82ff573..3da45d0 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -779,11 +779,34 @@ static void __init common_init(void) pxa_set_i2c_info(NULL); } +#if defined(CONFIG_MACH_AKITA) || defined(CONFIG_MACH_BORZOI) +static struct nand_bbt_descr sharpsl_akita_bbt = { + .options = 0, + .offs = 4, + .len = 1, + .pattern = scan_ff_pattern +}; + +static struct nand_ecclayout akita_oobinfo = { + .eccbytes = 24, + .eccpos = { + 0x5, 0x1, 0x2, 0x3, 0x6, 0x7, 0x15, 0x11, + 0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23, + 0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37}, + .oobfree = {{0x08, 0x09}} +}; +#endif + #if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI) static void __init spitz_init(void) { spitz_ficp_platform_data.gpio_pwdown = SPITZ_GPIO_IR_ON; + if (machine_is_borzoi()) { + sharpsl_nand_platform_data.badblock_pattern = &sharpsl_akita_bbt; + sharpsl_nand_platform_data.ecc_layout = &akita_oobinfo; + } + platform_scoop_config = &spitz_pcmcia_config; common_init(); @@ -808,22 +831,6 @@ static struct i2c_board_info akita_i2c_board_info[] = { }, }; -static struct nand_bbt_descr sharpsl_akita_bbt = { - .options = 0, - .offs = 4, - .len = 1, - .pattern = scan_ff_pattern -}; - -static struct nand_ecclayout akita_oobinfo = { - .eccbytes = 24, - .eccpos = { - 0x5, 0x1, 0x2, 0x3, 0x6, 0x7, 0x15, 0x11, - 0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23, - 0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37}, - .oobfree = {{0x08, 0x09}} -}; - static void __init akita_init(void) { spitz_ficp_platform_data.gpio_pwdown = AKITA_GPIO_IR_ON; -- cgit v0.10.2 From 902805dbdae016653768f7139d7b3ab36a20cc6d Mon Sep 17 00:00:00 2001 From: Ondrej Zajicek Date: Mon, 26 Oct 2009 23:59:30 +0100 Subject: [ARM] pxa/palm: fix incorrect initialization of Palm Tungsten C keyboard Palm Tungsten C keyboard structure has swapped rows/cols gpio structures and does not work. This patch fixes it. Signed-off-by: Ondrej Zajicek Cc: Marek Vasut Signed-off-by: Eric Miao diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c index bb2cc0d..0b92291 100644 --- a/arch/arm/mach-pxa/palmtc.c +++ b/arch/arm/mach-pxa/palmtc.c @@ -292,10 +292,10 @@ const static unsigned int palmtc_keypad_col_gpios[] = { static struct matrix_keypad_platform_data palmtc_keypad_platform_data = { .keymap_data = &palmtc_keymap_data, - .col_gpios = palmtc_keypad_row_gpios, - .num_col_gpios = 12, - .row_gpios = palmtc_keypad_col_gpios, - .num_row_gpios = 4, + .row_gpios = palmtc_keypad_row_gpios, + .num_row_gpios = ARRAY_SIZE(palmtc_keypad_row_gpios), + .col_gpios = palmtc_keypad_col_gpios, + .num_col_gpios = ARRAY_SIZE(palmtc_keypad_col_gpios), .active_low = 1, .debounce_ms = 20, -- cgit v0.10.2 From b1e19e5601277845b4f17ecd7c9ba04f73ee11aa Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Tue, 3 Nov 2009 00:25:53 +0900 Subject: nilfs2: fix dirty page accounting leak causing hang at write MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Bruno Prémont and Dunphy, Bill noticed me that NILFS will certainly hang on ARM-based targets. I found this was caused by an underflow of dirty pages counter. A b-tree cache routine was marking page dirty without adjusting page account information. This fixes the dirty page accounting leak and resolves the hang on arm-based targets. Reported-by: Bruno Prémont Reported-by: Dunphy, Bill Signed-off-by: Ryusuke Konishi Tested-by: Bruno Prémont Cc: stable diff --git a/fs/nilfs2/btnode.c b/fs/nilfs2/btnode.c index 5941958..435864c 100644 --- a/fs/nilfs2/btnode.c +++ b/fs/nilfs2/btnode.c @@ -276,8 +276,7 @@ void nilfs_btnode_commit_change_key(struct address_space *btnc, "invalid oldkey %lld (newkey=%lld)", (unsigned long long)oldkey, (unsigned long long)newkey); - if (!test_set_buffer_dirty(obh) && TestSetPageDirty(opage)) - BUG(); + nilfs_btnode_mark_dirty(obh); spin_lock_irq(&btnc->tree_lock); radix_tree_delete(&btnc->page_tree, oldkey); -- cgit v0.10.2 From aeda7f6343e6375a832e52ff5ed389c115023ca5 Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Mon, 2 Nov 2009 15:08:13 +0900 Subject: nilfs2: fix irregular checkpoint creation due to data flush When nilfs flushes out dirty data to reduce memory pressure, creation of checkpoints is wrongly postponed. This bug causes irregular checkpoint creation especially in small footprint systems. To correct this issue, a timer for the checkpoint creation has to be continued if a log writer does not create a checkpoint. This will do the correction. Signed-off-by: Ryusuke Konishi diff --git a/fs/nilfs2/segment.c b/fs/nilfs2/segment.c index 683df89..6eff66a 100644 --- a/fs/nilfs2/segment.c +++ b/fs/nilfs2/segment.c @@ -2468,17 +2468,22 @@ static void nilfs_segctor_notify(struct nilfs_sc_info *sci, /* Clear requests (even when the construction failed) */ spin_lock(&sci->sc_state_lock); - sci->sc_state &= ~NILFS_SEGCTOR_COMMIT; - if (req->mode == SC_LSEG_SR) { + sci->sc_state &= ~NILFS_SEGCTOR_COMMIT; sci->sc_seq_done = req->seq_accepted; nilfs_segctor_wakeup(sci, req->sc_err ? : req->sb_err); sci->sc_flush_request = 0; - } else if (req->mode == SC_FLUSH_FILE) - sci->sc_flush_request &= ~FLUSH_FILE_BIT; - else if (req->mode == SC_FLUSH_DAT) - sci->sc_flush_request &= ~FLUSH_DAT_BIT; + } else { + if (req->mode == SC_FLUSH_FILE) + sci->sc_flush_request &= ~FLUSH_FILE_BIT; + else if (req->mode == SC_FLUSH_DAT) + sci->sc_flush_request &= ~FLUSH_DAT_BIT; + /* re-enable timer if checkpoint creation was not done */ + if (sci->sc_timer && (sci->sc_state & NILFS_SEGCTOR_COMMIT) && + time_before(jiffies, sci->sc_timer->expires)) + add_timer(sci->sc_timer); + } spin_unlock(&sci->sc_state_lock); } -- cgit v0.10.2 From 05b4358ad564d7a6a51b3717afe771d36711e9c4 Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Mon, 14 Sep 2009 01:20:35 +0900 Subject: nilfs2: add zero-fill for new btree node buffers Adds missing initialization of newly allocated b-tree node buffers. This avoids garbage data to be mixed in b-tree node blocks. Signed-off-by: Ryusuke Konishi diff --git a/fs/nilfs2/btnode.c b/fs/nilfs2/btnode.c index 435864c..84c2538 100644 --- a/fs/nilfs2/btnode.c +++ b/fs/nilfs2/btnode.c @@ -87,6 +87,7 @@ int nilfs_btnode_submit_block(struct address_space *btnc, __u64 blocknr, brelse(bh); BUG(); } + memset(bh->b_data, 0, 1 << inode->i_blkbits); bh->b_bdev = NILFS_I_NILFS(inode)->ns_bdev; bh->b_blocknr = blocknr; set_buffer_mapped(bh); -- cgit v0.10.2 From c482ae4dcf23fd241321595d71bbe8aee33eabf5 Mon Sep 17 00:00:00 2001 From: Haojian Zhuang Date: Mon, 2 Nov 2009 14:02:21 -0500 Subject: [ARM] pxa: fix resume failure by saving/restoring IPRx registers Since interrupt handler is changed to use interrupt priority, we also need to save and restore these interrupt controller registers in suspend/resume routine. Signed-off-by: Haojian Zhuang Tested-by: Daniel Mack Tested-by: Pavel Machek Tested-by: Robert Jarzmik Acked-by: Pavel Machek Signed-off-by: Eric Miao diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index d694ce2..6112af4 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -25,6 +25,8 @@ #include "generic.h" +#define MAX_INTERNAL_IRQS 128 + #define IRQ_BIT(n) (((n) - PXA_IRQ(0)) & 0x1f) #define _ICMR(n) (*((((n) - PXA_IRQ(0)) & ~0x1f) ? &ICMR2 : &ICMR)) #define _ICLR(n) (*((((n) - PXA_IRQ(0)) & ~0x1f) ? &ICLR2 : &ICLR)) @@ -122,6 +124,8 @@ void __init pxa_init_irq(int irq_nr, set_wake_t fn) { int irq, i; + BUG_ON(irq_nr > MAX_INTERNAL_IRQS); + pxa_internal_irq_nr = irq_nr; for (irq = PXA_IRQ(0); irq < PXA_IRQ(irq_nr); irq += 32) { @@ -149,7 +153,8 @@ void __init pxa_init_irq(int irq_nr, set_wake_t fn) } #ifdef CONFIG_PM -static unsigned long saved_icmr[2]; +static unsigned long saved_icmr[MAX_INTERNAL_IRQS/32]; +static unsigned long saved_ipr[MAX_INTERNAL_IRQS]; static int pxa_irq_suspend(struct sys_device *dev, pm_message_t state) { @@ -159,6 +164,8 @@ static int pxa_irq_suspend(struct sys_device *dev, pm_message_t state) saved_icmr[i] = _ICMR(irq); _ICMR(irq) = 0; } + for (i = 0; i < pxa_internal_irq_nr; i++) + saved_ipr[i] = IPR(i); return 0; } @@ -171,6 +178,8 @@ static int pxa_irq_resume(struct sys_device *dev) _ICMR(irq) = saved_icmr[i]; _ICLR(irq) = 0; } + for (i = 0; i < pxa_internal_irq_nr; i++) + IPR(i) = saved_ipr[i]; ICCR = 1; return 0; -- cgit v0.10.2 From ee1e82cee5e463a885d3c71acb2c769490e6927f Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Mon, 2 Nov 2009 21:57:40 -0800 Subject: Input: i8042 - try to get stable CTR value when initializing If user presses keys while i8042 is being initialized there is a chance that keyboard data will be mistaken for results of Read Control Register command causing futher troubles. Work around this issue by reading CTR several times and stop when we get matching results. Reported-and-tested-by: Dave Young Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index a315781..1df02d25 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -836,17 +836,32 @@ static int i8042_controller_selftest(void) static int i8042_controller_init(void) { unsigned long flags; + int n = 0; + unsigned char ctr[2]; /* - * Save the CTR for restoral on unload / reboot. + * Save the CTR for restore on unload / reboot. */ - if (i8042_command(&i8042_ctr, I8042_CMD_CTL_RCTR)) { - printk(KERN_ERR "i8042.c: Can't read CTR while initializing i8042.\n"); - return -EIO; - } + do { + if (n >= 10) { + printk(KERN_ERR + "i8042.c: Unable to get stable CTR read.\n"); + return -EIO; + } + + if (n != 0) + udelay(50); + + if (i8042_command(&ctr[n++ % 2], I8042_CMD_CTL_RCTR)) { + printk(KERN_ERR + "i8042.c: Can't read CTR while initializing i8042.\n"); + return -EIO; + } - i8042_initial_ctr = i8042_ctr; + } while (n < 2 || ctr[0] != ctr[1]); + + i8042_initial_ctr = i8042_ctr = ctr[0]; /* * Disable the keyboard interface and interrupt. @@ -895,6 +910,12 @@ static int i8042_controller_init(void) return -EIO; } +/* + * Flush whatever accumulated while we were disabling keyboard port. + */ + + i8042_flush(); + return 0; } @@ -914,7 +935,7 @@ static void i8042_controller_reset(void) i8042_ctr |= I8042_CTR_KBDDIS | I8042_CTR_AUXDIS; i8042_ctr &= ~(I8042_CTR_KBDINT | I8042_CTR_AUXINT); - if (i8042_command(&i8042_initial_ctr, I8042_CMD_CTL_WCTR)) + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) printk(KERN_WARNING "i8042.c: Can't write CTR while resetting.\n"); /* -- cgit v0.10.2 From 0baa3de6eb677e5c9b4c38642c6619df2b4ef11f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?David=20H=C3=A4rdeman?= Date: Mon, 2 Nov 2009 21:57:41 -0800 Subject: Input: winbond-cir - select LEDS_TRIGGERS MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit drivers/input/misc/winbond-cir.c depends on LEDS_TRIGGERS so add an appropriate select to drivers/input/misc/Kconfig Signed-off-by: David Härdeman Signed-off-by: Andrew Morton Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 02f4f8f..a9bb254 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -227,6 +227,7 @@ config INPUT_WINBOND_CIR depends on X86 && PNP select NEW_LEDS select LEDS_CLASS + select LEDS_TRIGGERS select BITREVERSE help Say Y here if you want to use the IR remote functionality found -- cgit v0.10.2 From 558a5e296a02266ef43d6e933ee35df9976de987 Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Mon, 2 Nov 2009 22:04:18 -0800 Subject: Input: gpio-keys - use IRQF_SHARED There is nothing that disallows gpio-keys to share it's IRQ line w/ other drivers. Make it use IRQF_SHARED in request_irq(). An example of other driver with which I'd like to share IRQ line for GPIO buttons is ledtrig-gpio. Signed-off-by: Dmitry Eremin-Solenikov Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c index a88aff3..77d1309 100644 --- a/drivers/input/keyboard/gpio_keys.c +++ b/drivers/input/keyboard/gpio_keys.c @@ -147,6 +147,7 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev) } error = request_irq(irq, gpio_keys_isr, + IRQF_SHARED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, button->desc ? button->desc : "gpio_keys", bdata); -- cgit v0.10.2 From 6b9de613ae9c79b637e070136585dde029578065 Mon Sep 17 00:00:00 2001 From: Mike Galbraith Date: Mon, 2 Nov 2009 20:36:51 +0100 Subject: sched: Disable SD_PREFER_LOCAL at node level Yanmin Zhang reported that SD_PREFER_LOCAL induces an order of magnitude increase in select_task_rq_fair() overhead while running heavy wakeup benchmarks (tbench and vmark). Since SD_BALANCE_WAKE is off at node level, turn SD_PREFER_LOCAL off as well pending further investigation. Reported-by: Zhang, Yanmin Signed-off-by: Mike Galbraith Cc: Peter Zijlstra LKML-Reference: Signed-off-by: Ingo Molnar diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h index d823c24..40e37b1 100644 --- a/arch/x86/include/asm/topology.h +++ b/arch/x86/include/asm/topology.h @@ -143,7 +143,7 @@ extern unsigned long node_remap_size[]; | 1*SD_BALANCE_FORK \ | 0*SD_BALANCE_WAKE \ | 1*SD_WAKE_AFFINE \ - | 1*SD_PREFER_LOCAL \ + | 0*SD_PREFER_LOCAL \ | 0*SD_SHARE_CPUPOWER \ | 0*SD_POWERSAVINGS_BALANCE \ | 0*SD_SHARE_PKG_RESOURCES \ -- cgit v0.10.2 From b84ff7d6f1b7f8a43414e74d972ec4c8f3361db4 Mon Sep 17 00:00:00 2001 From: Mike Galbraith Date: Thu, 29 Oct 2009 11:48:30 +0100 Subject: sched: Fix kthread_bind() by moving the body of kthread_bind() to sched.c Eric Paris reported that commit f685ceacab07d3f6c236f04803e2f2f0dbcc5afb causes boot time PREEMPT_DEBUG complaints. [ 4.590699] BUG: using smp_processor_id() in preemptible [00000000] code: rmmod/1314 [ 4.593043] caller is task_hot+0x86/0xd0 Since kthread_bind() messes with scheduler internals, move the body to sched.c, and lock the runqueue. Reported-by: Eric Paris Signed-off-by: Mike Galbraith Tested-by: Eric Paris Cc: Peter Zijlstra LKML-Reference: <1256813310.7574.3.camel@marge.simson.net> [ v2: fix !SMP build and clean up ] Signed-off-by: Ingo Molnar diff --git a/kernel/kthread.c b/kernel/kthread.c index 5fe7099..ab7ae57 100644 --- a/kernel/kthread.c +++ b/kernel/kthread.c @@ -150,29 +150,6 @@ struct task_struct *kthread_create(int (*threadfn)(void *data), EXPORT_SYMBOL(kthread_create); /** - * kthread_bind - bind a just-created kthread to a cpu. - * @k: thread created by kthread_create(). - * @cpu: cpu (might not be online, must be possible) for @k to run on. - * - * Description: This function is equivalent to set_cpus_allowed(), - * except that @cpu doesn't need to be online, and the thread must be - * stopped (i.e., just returned from kthread_create()). - */ -void kthread_bind(struct task_struct *k, unsigned int cpu) -{ - /* Must have done schedule() in kthread() before we set_task_cpu */ - if (!wait_task_inactive(k, TASK_UNINTERRUPTIBLE)) { - WARN_ON(1); - return; - } - set_task_cpu(k, cpu); - k->cpus_allowed = cpumask_of_cpu(cpu); - k->rt.nr_cpus_allowed = 1; - k->flags |= PF_THREAD_BOUND; -} -EXPORT_SYMBOL(kthread_bind); - -/** * kthread_stop - stop a thread created by kthread_create(). * @k: thread created by kthread_create(). * diff --git a/kernel/sched.c b/kernel/sched.c index bf21adb..5cb7d63 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -1996,6 +1996,38 @@ static inline void check_class_changed(struct rq *rq, struct task_struct *p, p->sched_class->prio_changed(rq, p, oldprio, running); } +/** + * kthread_bind - bind a just-created kthread to a cpu. + * @k: thread created by kthread_create(). + * @cpu: cpu (might not be online, must be possible) for @k to run on. + * + * Description: This function is equivalent to set_cpus_allowed(), + * except that @cpu doesn't need to be online, and the thread must be + * stopped (i.e., just returned from kthread_create()). + * + * Function lives here instead of kthread.c because it messes with + * scheduler internals which require locking. + */ +void kthread_bind(struct task_struct *p, unsigned int cpu) +{ + struct rq *rq = cpu_rq(cpu); + unsigned long flags; + + /* Must have done schedule() in kthread() before we set_task_cpu */ + if (!wait_task_inactive(p, TASK_UNINTERRUPTIBLE)) { + WARN_ON(1); + return; + } + + spin_lock_irqsave(&rq->lock, flags); + set_task_cpu(p, cpu); + p->cpus_allowed = cpumask_of_cpu(cpu); + p->rt.nr_cpus_allowed = 1; + p->flags |= PF_THREAD_BOUND; + spin_unlock_irqrestore(&rq->lock, flags); +} +EXPORT_SYMBOL(kthread_bind); + #ifdef CONFIG_SMP /* * Is this task likely cache-hot: -- cgit v0.10.2 From 9905d1b411946fb3fb228e8c6529fd94afda8a92 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 3 Nov 2009 10:54:58 +0100 Subject: PM / yenta: Split resume into early and late parts (rev. 4) Commit 0c570cdeb8fdfcb354a3e9cd81bfc6a09c19de0c (PM / yenta: Fix cardbus suspend/resume regression) caused resume to fail on systems with two CardBus bridges. While the exact nature of the failure is not known at the moment, it can be worked around by splitting the yenta resume into an early part, executed during the early phase of resume, that will only resume the socket and power it up if there was a card in it during suspend, and a late part, executed during "regular" resume, that will carry out all of the remaining yenta resume operations. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=14334, which is a listed regression from 2.6.31. Signed-off-by: Rafael J. Wysocki Acked-by: Dominik Brodowski Reported-by: Stephen J. Gowdy Tested-by: Jose Marino diff --git a/drivers/pcmcia/cs.c b/drivers/pcmcia/cs.c index 934d4be..698d75c 100644 --- a/drivers/pcmcia/cs.c +++ b/drivers/pcmcia/cs.c @@ -98,10 +98,13 @@ EXPORT_SYMBOL(pcmcia_socket_list_rwsem); * These functions check for the appropriate struct pcmcia_soket arrays, * and pass them to the low-level functions pcmcia_{suspend,resume}_socket */ +static int socket_early_resume(struct pcmcia_socket *skt); +static int socket_late_resume(struct pcmcia_socket *skt); static int socket_resume(struct pcmcia_socket *skt); static int socket_suspend(struct pcmcia_socket *skt); -int pcmcia_socket_dev_suspend(struct device *dev) +static void pcmcia_socket_dev_run(struct device *dev, + int (*cb)(struct pcmcia_socket *)) { struct pcmcia_socket *socket; @@ -110,29 +113,34 @@ int pcmcia_socket_dev_suspend(struct device *dev) if (socket->dev.parent != dev) continue; mutex_lock(&socket->skt_mutex); - socket_suspend(socket); + cb(socket); mutex_unlock(&socket->skt_mutex); } up_read(&pcmcia_socket_list_rwsem); +} +int pcmcia_socket_dev_suspend(struct device *dev) +{ + pcmcia_socket_dev_run(dev, socket_suspend); return 0; } EXPORT_SYMBOL(pcmcia_socket_dev_suspend); -int pcmcia_socket_dev_resume(struct device *dev) +void pcmcia_socket_dev_early_resume(struct device *dev) { - struct pcmcia_socket *socket; + pcmcia_socket_dev_run(dev, socket_early_resume); +} +EXPORT_SYMBOL(pcmcia_socket_dev_early_resume); - down_read(&pcmcia_socket_list_rwsem); - list_for_each_entry(socket, &pcmcia_socket_list, socket_list) { - if (socket->dev.parent != dev) - continue; - mutex_lock(&socket->skt_mutex); - socket_resume(socket); - mutex_unlock(&socket->skt_mutex); - } - up_read(&pcmcia_socket_list_rwsem); +void pcmcia_socket_dev_late_resume(struct device *dev) +{ + pcmcia_socket_dev_run(dev, socket_late_resume); +} +EXPORT_SYMBOL(pcmcia_socket_dev_late_resume); +int pcmcia_socket_dev_resume(struct device *dev) +{ + pcmcia_socket_dev_run(dev, socket_resume); return 0; } EXPORT_SYMBOL(pcmcia_socket_dev_resume); @@ -546,29 +554,24 @@ static int socket_suspend(struct pcmcia_socket *skt) return 0; } -/* - * Resume a socket. If a card is present, verify its CIS against - * our cached copy. If they are different, the card has been - * replaced, and we need to tell the drivers. - */ -static int socket_resume(struct pcmcia_socket *skt) +static int socket_early_resume(struct pcmcia_socket *skt) { - int ret; - - if (!(skt->state & SOCKET_SUSPEND)) - return -EBUSY; - skt->socket = dead_socket; skt->ops->init(skt); skt->ops->set_socket(skt, &skt->socket); + if (skt->state & SOCKET_PRESENT) + skt->resume_status = socket_setup(skt, resume_delay); + return 0; +} +static int socket_late_resume(struct pcmcia_socket *skt) +{ if (!(skt->state & SOCKET_PRESENT)) { skt->state &= ~SOCKET_SUSPEND; return socket_insert(skt); } - ret = socket_setup(skt, resume_delay); - if (ret == 0) { + if (skt->resume_status == 0) { /* * FIXME: need a better check here for cardbus cards. */ @@ -596,6 +599,20 @@ static int socket_resume(struct pcmcia_socket *skt) return 0; } +/* + * Resume a socket. If a card is present, verify its CIS against + * our cached copy. If they are different, the card has been + * replaced, and we need to tell the drivers. + */ +static int socket_resume(struct pcmcia_socket *skt) +{ + if (!(skt->state & SOCKET_SUSPEND)) + return -EBUSY; + + socket_early_resume(skt); + return socket_late_resume(skt); +} + static void socket_remove(struct pcmcia_socket *skt) { dev_printk(KERN_NOTICE, &skt->dev, diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c index abe0e44..8be4cc4 100644 --- a/drivers/pcmcia/yenta_socket.c +++ b/drivers/pcmcia/yenta_socket.c @@ -1275,16 +1275,26 @@ static int yenta_dev_resume_noirq(struct device *dev) if (socket->type && socket->type->restore_state) socket->type->restore_state(socket); - return pcmcia_socket_dev_resume(dev); + pcmcia_socket_dev_early_resume(dev); + return 0; +} + +static int yenta_dev_resume(struct device *dev) +{ + pcmcia_socket_dev_late_resume(dev); + return 0; } static struct dev_pm_ops yenta_pm_ops = { .suspend_noirq = yenta_dev_suspend_noirq, .resume_noirq = yenta_dev_resume_noirq, + .resume = yenta_dev_resume, .freeze_noirq = yenta_dev_suspend_noirq, .thaw_noirq = yenta_dev_resume_noirq, + .thaw = yenta_dev_resume, .poweroff_noirq = yenta_dev_suspend_noirq, .restore_noirq = yenta_dev_resume_noirq, + .restore = yenta_dev_resume, }; #define YENTA_PM_OPS (¥ta_pm_ops) diff --git a/include/pcmcia/ss.h b/include/pcmcia/ss.h index d696a69..e0f6feb 100644 --- a/include/pcmcia/ss.h +++ b/include/pcmcia/ss.h @@ -262,6 +262,8 @@ struct pcmcia_socket { struct device dev; /* data internal to the socket driver */ void *driver_data; + /* status of the card during resume from a system sleep state */ + int resume_status; }; @@ -280,6 +282,8 @@ extern struct pccard_resource_ops pccard_nonstatic_ops; /* socket drivers are expected to use these callbacks in their .drv struct */ extern int pcmcia_socket_dev_suspend(struct device *dev); +extern void pcmcia_socket_dev_early_resume(struct device *dev); +extern void pcmcia_socket_dev_late_resume(struct device *dev); extern int pcmcia_socket_dev_resume(struct device *dev); /* socket drivers use this callback in their IRQ handler */ -- cgit v0.10.2 From 76b57e613f6006ff525a17876c89326d127cadc9 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 7 Oct 2009 22:37:35 +0200 Subject: PM / Hibernate: Fix blkdev refleaks While cruising through the swsusp code I found few blkdev reference leaks of resume_bdev. swsusp_read: remove blkdev_put altogether. Some fail paths do not do that. swsusp_check: make sure we always put a reference on fail paths software_resume: all fail paths between swsusp_check and swsusp_read omit swsusp_close. Add it in those cases. And since swsusp_read doesn't drop the reference anymore, do it here unconditionally. [rjw: Fixed a small coding style issue.] Signed-off-by: Jiri Slaby Signed-off-by: Rafael J. Wysocki diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c index 04b3a83..04a9e90 100644 --- a/kernel/power/hibernate.c +++ b/kernel/power/hibernate.c @@ -693,21 +693,22 @@ static int software_resume(void) /* The snapshot device should not be opened while we're running */ if (!atomic_add_unless(&snapshot_device_available, -1, 0)) { error = -EBUSY; + swsusp_close(FMODE_READ); goto Unlock; } pm_prepare_console(); error = pm_notifier_call_chain(PM_RESTORE_PREPARE); if (error) - goto Finish; + goto close_finish; error = usermodehelper_disable(); if (error) - goto Finish; + goto close_finish; error = create_basic_memory_bitmaps(); if (error) - goto Finish; + goto close_finish; pr_debug("PM: Preparing processes for restore.\n"); error = prepare_processes(); @@ -719,6 +720,7 @@ static int software_resume(void) pr_debug("PM: Reading hibernation image.\n"); error = swsusp_read(&flags); + swsusp_close(FMODE_READ); if (!error) hibernation_restore(flags & SF_PLATFORM_MODE); @@ -737,6 +739,9 @@ static int software_resume(void) mutex_unlock(&pm_mutex); pr_debug("PM: Resume from disk failed.\n"); return error; +close_finish: + swsusp_close(FMODE_READ); + goto Finish; } late_initcall(software_resume); diff --git a/kernel/power/swap.c b/kernel/power/swap.c index b101cdc..a438862 100644 --- a/kernel/power/swap.c +++ b/kernel/power/swap.c @@ -572,8 +572,6 @@ int swsusp_read(unsigned int *flags_p) error = load_image(&handle, &snapshot, header->pages - 1); release_swap_reader(&handle); - blkdev_put(resume_bdev, FMODE_READ); - if (!error) pr_debug("PM: Image successfully loaded\n"); else @@ -596,7 +594,7 @@ int swsusp_check(void) error = bio_read_page(swsusp_resume_block, swsusp_header, NULL); if (error) - return error; + goto put; if (!memcmp(SWSUSP_SIG, swsusp_header->sig, 10)) { memcpy(swsusp_header->sig, swsusp_header->orig_sig, 10); @@ -604,8 +602,10 @@ int swsusp_check(void) error = bio_write_page(swsusp_resume_block, swsusp_header, NULL); } else { - return -EINVAL; + error = -EINVAL; } + +put: if (error) blkdev_put(resume_bdev, FMODE_READ); else -- cgit v0.10.2 From 4ff277f9e42fa16314045bd124a61519286094c0 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 28 Oct 2009 22:55:33 +0100 Subject: PM / Hibernate: Fix error handling in save_image() There are too many retval variables in save_image(). Thus error return value from snapshot_read_next() may be ignored and only part of the snapshot (successfully) written. Remove 'error' variable, invert the condition in the do-while loop and convert the loop to use only 'ret' variable. Switch the rest of the function to consider only 'ret'. Also make sure we end printed line by \n if an error occurs. Signed-off-by: Jiri Slaby Acked-by: Pavel Machek Signed-off-by: Rafael J. Wysocki diff --git a/kernel/power/swap.c b/kernel/power/swap.c index a438862..afa052b 100644 --- a/kernel/power/swap.c +++ b/kernel/power/swap.c @@ -314,7 +314,6 @@ static int save_image(struct swap_map_handle *handle, { unsigned int m; int ret; - int error = 0; int nr_pages; int err2; struct bio *bio; @@ -329,26 +328,27 @@ static int save_image(struct swap_map_handle *handle, nr_pages = 0; bio = NULL; do_gettimeofday(&start); - do { + while (1) { ret = snapshot_read_next(snapshot, PAGE_SIZE); - if (ret > 0) { - error = swap_write_page(handle, data_of(*snapshot), - &bio); - if (error) - break; - if (!(nr_pages % m)) - printk("\b\b\b\b%3d%%", nr_pages / m); - nr_pages++; - } - } while (ret > 0); + if (ret <= 0) + break; + ret = swap_write_page(handle, data_of(*snapshot), &bio); + if (ret) + break; + if (!(nr_pages % m)) + printk("\b\b\b\b%3d%%", nr_pages / m); + nr_pages++; + } err2 = wait_on_bio_chain(&bio); do_gettimeofday(&stop); - if (!error) - error = err2; - if (!error) + if (!ret) + ret = err2; + if (!ret) printk("\b\b\b\bdone\n"); + else + printk("\n"); swsusp_show_speed(&start, &stop, nr_to_write, "Wrote"); - return error; + return ret; } /** -- cgit v0.10.2 From bf9fd67a0328d56eff6022f80d4eb88ba6614119 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 28 Oct 2009 22:55:42 +0100 Subject: PM / Hibernate: Add newline to load_image() fail path Finish a line by \n when load_image fails in the middle of loading. Signed-off-by: Jiri Slaby Acked-by: Pavel Machek Signed-off-by: Rafael J. Wysocki diff --git a/kernel/power/swap.c b/kernel/power/swap.c index afa052b..890f6b1 100644 --- a/kernel/power/swap.c +++ b/kernel/power/swap.c @@ -536,7 +536,8 @@ static int load_image(struct swap_map_handle *handle, snapshot_write_finalize(snapshot); if (!snapshot_image_loaded(snapshot)) error = -ENODATA; - } + } else + printk("\n"); swsusp_show_speed(&start, &stop, nr_to_read, "Read"); return error; } -- cgit v0.10.2 From e528e876897217465d5cd7cb28130d8489596e34 Mon Sep 17 00:00:00 2001 From: Romit Dasgupta Date: Wed, 28 Oct 2009 22:56:02 +0100 Subject: PM: Fix warning on suspend errors Fixes the point where we need to complete the power transition when device suspend fails, so that we don't print warnings about devices added to the device hierarchy after a failing suspend. [rjw: Modified changelog.] Signed-off-by: Romit Dasgupta Signed-off-by: Rafael J. Wysocki diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index e0dc407..8aa2443 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -511,6 +511,7 @@ static void dpm_complete(pm_message_t state) INIT_LIST_HEAD(&list); mutex_lock(&dpm_list_mtx); + transition_started = false; while (!list_empty(&dpm_list)) { struct device *dev = to_device(dpm_list.prev); -- cgit v0.10.2 From 2ddac2a6a8f13e95664fe7ad1b728ac84fb1bd07 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Wed, 28 Oct 2009 22:56:10 +0100 Subject: PM: Remove some debug messages producing too much noise pm_runtime_idle() is somewhat noisy. Remove debug prints. Signed-off-by: Pavel Machek Signed-off-by: Rafael J. Wysocki diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index 38556f6..a770498 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -51,8 +51,6 @@ static int __pm_runtime_idle(struct device *dev) { int retval = 0; - dev_dbg(dev, "__pm_runtime_idle()!\n"); - if (dev->power.runtime_error) retval = -EINVAL; else if (dev->power.idle_notification) @@ -93,8 +91,6 @@ static int __pm_runtime_idle(struct device *dev) wake_up_all(&dev->power.wait_queue); out: - dev_dbg(dev, "__pm_runtime_idle() returns %d!\n", retval); - return retval; } -- cgit v0.10.2 From 58ce48a9de1dd47acb5dc00e2837214d2be1d92a Mon Sep 17 00:00:00 2001 From: Corentin Chary Date: Fri, 16 Oct 2009 22:22:46 +0200 Subject: Revert "eeepc-laptop: Prevent a panic when disabling RT2860 wireless when associated" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit rt2860sta is fine with the patch as is, but iwl3945 isn't (eeepc_rfkill_set() needs to call eeepc_rfkill_hotplug(true) – which means that we're back to causing the rt2860sta panic This reverts commit b56ab33d68638e6aafdbfc694025e8354a628f49. Signed-off-by: Corentin Chary Signed-off-by: Darren Salt Signed-off-by: Len Brown diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index d379e74..789d6ae 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -150,8 +150,6 @@ struct eeepc_hotk { /* The actual device the driver binds to */ static struct eeepc_hotk *ehotk; -static void eeepc_rfkill_hotplug(bool real); - /* Platform device/driver */ static int eeepc_hotk_thaw(struct device *device); static int eeepc_hotk_restore(struct device *device); @@ -345,16 +343,7 @@ static bool eeepc_wlan_rfkill_blocked(void) static int eeepc_rfkill_set(void *data, bool blocked) { unsigned long asl = (unsigned long)data; - int ret; - - if (asl != CM_ASL_WLAN) - return set_acpi(asl, !blocked); - - /* hack to avoid panic with rt2860sta */ - if (blocked) - eeepc_rfkill_hotplug(false); - ret = set_acpi(asl, !blocked); - return ret; + return set_acpi(asl, !blocked); } static const struct rfkill_ops eeepc_rfkill_ops = { @@ -654,13 +643,13 @@ static int eeepc_get_adapter_status(struct hotplug_slot *hotplug_slot, return 0; } -static void eeepc_rfkill_hotplug(bool real) +static void eeepc_rfkill_hotplug(void) { struct pci_dev *dev; struct pci_bus *bus; - bool blocked = real ? eeepc_wlan_rfkill_blocked() : true; + bool blocked = eeepc_wlan_rfkill_blocked(); - if (real && ehotk->wlan_rfkill) + if (ehotk->wlan_rfkill) rfkill_set_sw_state(ehotk->wlan_rfkill, blocked); mutex_lock(&ehotk->hotplug_lock); @@ -703,7 +692,7 @@ static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data) if (event != ACPI_NOTIFY_BUS_CHECK) return; - eeepc_rfkill_hotplug(true); + eeepc_rfkill_hotplug(); } static void eeepc_hotk_notify(struct acpi_device *device, u32 event) @@ -861,7 +850,7 @@ static int eeepc_hotk_restore(struct device *device) { /* Refresh both wlan rfkill state and pci hotplug */ if (ehotk->wlan_rfkill) - eeepc_rfkill_hotplug(true); + eeepc_rfkill_hotplug(); if (ehotk->bluetooth_rfkill) rfkill_set_sw_state(ehotk->bluetooth_rfkill, @@ -1004,7 +993,7 @@ static void eeepc_rfkill_exit(void) * Refresh pci hotplug in case the rfkill state was changed after * eeepc_unregister_rfkill_notifier() */ - eeepc_rfkill_hotplug(true); + eeepc_rfkill_hotplug(); if (ehotk->hotplug_slot) pci_hp_deregister(ehotk->hotplug_slot); @@ -1120,7 +1109,7 @@ static int eeepc_rfkill_init(struct device *dev) * Refresh pci hotplug in case the rfkill state was changed during * setup. */ - eeepc_rfkill_hotplug(true); + eeepc_rfkill_hotplug(); exit: if (result && result != -ENODEV) -- cgit v0.10.2 From 80f0c895b57f0d936b420de6afea5167a49f62fa Mon Sep 17 00:00:00 2001 From: Luca Niccoli Date: Fri, 16 Oct 2009 22:22:47 +0200 Subject: eeepc-laptop: don't enable camera at startup if it's already on. Switching the camera takes 500ms, checking if it's on is almost free... The BIOS remembers the setting through reboots, so there's good chance the camera is already enabled. Signed-off-by: Luca Niccoli Cc: Corentin Chary Cc: Alan Jenkins Cc: Matthew Garrett Signed-off-by: Andrew Morton Signed-off-by: Corentin Chary Signed-off-by: Len Brown diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index 789d6ae..4226e53 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -356,7 +356,8 @@ static void __devinit eeepc_enable_camera(void) * If the following call to set_acpi() fails, it's because there's no * camera so we can ignore the error. */ - set_acpi(CM_ASL_CAMERA, 1); + if (get_acpi(CM_ASL_CAMERA) == 0) + set_acpi(CM_ASL_CAMERA, 1); } /* -- cgit v0.10.2 From 1d510750941a53a1d3049c1d33c75d6dfcd78618 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Tue, 3 Nov 2009 10:11:14 +0000 Subject: Correct nr_processes() when CPUs have been unplugged nr_processes() returns the sum of the per cpu counter process_counts for all online CPUs. This counter is incremented for the current CPU on fork() and decremented for the current CPU on exit(). Since a process does not necessarily fork and exit on the same CPU the process_count for an individual CPU can be either positive or negative and effectively has no meaning in isolation. Therefore calculating the sum of process_counts over only the online CPUs omits the processes which were started or stopped on any CPU which has since been unplugged. Only the sum of process_counts across all possible CPUs has meaning. The only caller of nr_processes() is proc_root_getattr() which calculates the number of links to /proc as stat->nlink = proc_root.nlink + nr_processes(); You don't have to be all that unlucky for the nr_processes() to return a negative value leading to a negative number of links (or rather, an apparently enormous number of links). If this happens then you can get failures where things like "ls /proc" start to fail because they got an -EOVERFLOW from some stat() call. Example with some debugging inserted to show what goes on: # ps haux|wc -l nr_processes: CPU0: 90 nr_processes: CPU1: 1030 nr_processes: CPU2: -900 nr_processes: CPU3: -136 nr_processes: TOTAL: 84 proc_root_getattr. nlink 12 + nr_processes() 84 = 96 84 # echo 0 >/sys/devices/system/cpu/cpu1/online # ps haux|wc -l nr_processes: CPU0: 85 nr_processes: CPU2: -901 nr_processes: CPU3: -137 nr_processes: TOTAL: -953 proc_root_getattr. nlink 12 + nr_processes() -953 = -941 75 # stat /proc/ nr_processes: CPU0: 84 nr_processes: CPU2: -901 nr_processes: CPU3: -137 nr_processes: TOTAL: -954 proc_root_getattr. nlink 12 + nr_processes() -954 = -942 File: `/proc/' Size: 0 Blocks: 0 IO Block: 1024 directory Device: 3h/3d Inode: 1 Links: 4294966354 Access: (0555/dr-xr-xr-x) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2009-11-03 09:06:55.000000000 +0000 Modify: 2009-11-03 09:06:55.000000000 +0000 Change: 2009-11-03 09:06:55.000000000 +0000 I'm not 100% convinced that the per_cpu regions remain valid for offline CPUs, although my testing suggests that they do. If not then I think the correct solution would be to aggregate the process_count for a given CPU into a global base value in cpu_down(). This bug appears to pre-date the transition to git and it looks like it may even have been present in linux-2.6.0-test7-bk3 since it looks like the code Rusty patched in http://lwn.net/Articles/64773/ was already wrong. Signed-off-by: Ian Campbell Cc: Andrew Morton Cc: Rusty Russell Signed-off-by: Linus Torvalds diff --git a/kernel/fork.c b/kernel/fork.c index 4c20fff..166b8c4 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -91,7 +91,7 @@ int nr_processes(void) int cpu; int total = 0; - for_each_online_cpu(cpu) + for_each_possible_cpu(cpu) total += per_cpu(process_counts, cpu); return total; -- cgit v0.10.2 From 2f5d46d2f669a6d0083e50f457ce4e32fb90568c Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Mon, 6 Jul 2009 12:15:12 +0200 Subject: avr32: add two new at91 to cpu.h definition Somme common drivers will need those at91 cpu_is_xxx() definitions. As at91sam9g10 and at91sam9g45 are on the way to linus' tree, here is the patch that adds those chips to cpu.h in AVR32 architecture. Signed-off-by: Nicolas Ferre Signed-off-by: Haavard Skinnemoen diff --git a/arch/avr32/mach-at32ap/include/mach/cpu.h b/arch/avr32/mach-at32ap/include/mach/cpu.h index 44d0bfa..c253e9b 100644 --- a/arch/avr32/mach-at32ap/include/mach/cpu.h +++ b/arch/avr32/mach-at32ap/include/mach/cpu.h @@ -31,5 +31,7 @@ #define cpu_is_at91sam9263() (0) #define cpu_is_at91sam9rl() (0) #define cpu_is_at91cap9() (0) +#define cpu_is_at91sam9g10() (0) +#define cpu_is_at91sam9g45() (0) #endif /* __ASM_ARCH_CPU_H */ -- cgit v0.10.2 From d8951adeba05719b9efd7ce875a3294ffdbb37ea Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Mon, 21 Sep 2009 12:03:56 +0200 Subject: at91: at91sam9g45 family: identify several chip versions cpu_is_xxx() macros are identifying generic at91sam9g45 chip. This patch adds the capacity to differentiate Engineering Samples and final lots through the inclusion of at91_cpu_fully_identify() and the related chip IDs with chip version field preserved. Signed-off-by: Nicolas Ferre Acked-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Hans-Christian Egtvedt diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h index 34a9502..c22df30 100644 --- a/arch/arm/mach-at91/include/mach/cpu.h +++ b/arch/arm/mach-at91/include/mach/cpu.h @@ -25,6 +25,8 @@ #define ARCH_ID_AT91SAM9G20 0x019905a0 #define ARCH_ID_AT91SAM9RL64 0x019b03a0 #define ARCH_ID_AT91SAM9G45 0x819b05a0 +#define ARCH_ID_AT91SAM9G45MRL 0x819b05a2 /* aka 9G45-ES2 & non ES lots */ +#define ARCH_ID_AT91SAM9G45ES 0x819b05a1 /* 9G45-ES (Engineering Sample) */ #define ARCH_ID_AT91CAP9 0x039A03A0 #define ARCH_ID_AT91SAM9XE128 0x329973a0 @@ -41,6 +43,11 @@ static inline unsigned long at91_cpu_identify(void) return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION); } +static inline unsigned long at91_cpu_fully_identify(void) +{ + return at91_sys_read(AT91_DBGU_CIDR); +} + #define ARCH_EXID_AT91SAM9M11 0x00000001 #define ARCH_EXID_AT91SAM9M10 0x00000002 #define ARCH_EXID_AT91SAM9G45 0x00000004 @@ -118,8 +125,10 @@ static inline unsigned long at91cap9_rev_identify(void) #ifdef CONFIG_ARCH_AT91SAM9G45 #define cpu_is_at91sam9g45() (at91_cpu_identify() == ARCH_ID_AT91SAM9G45) +#define cpu_is_at91sam9g45es() (at91_cpu_fully_identify() == ARCH_ID_AT91SAM9G45ES) #else #define cpu_is_at91sam9g45() (0) +#define cpu_is_at91sam9g45es() (0) #endif #ifdef CONFIG_ARCH_AT91CAP9 diff --git a/arch/avr32/mach-at32ap/include/mach/cpu.h b/arch/avr32/mach-at32ap/include/mach/cpu.h index c253e9b..9c96a13 100644 --- a/arch/avr32/mach-at32ap/include/mach/cpu.h +++ b/arch/avr32/mach-at32ap/include/mach/cpu.h @@ -33,5 +33,6 @@ #define cpu_is_at91cap9() (0) #define cpu_is_at91sam9g10() (0) #define cpu_is_at91sam9g45() (0) +#define cpu_is_at91sam9g45es() (0) #endif /* __ASM_ARCH_CPU_H */ -- cgit v0.10.2 From 7825cf10e31c64ece3cac66fb01a742f1094da51 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Tue, 20 Oct 2009 15:28:21 +0900 Subject: xen/hvc: make sure console output is always emitted, with explicit polling We never want to rely on the hvc workqueue to emit output, because the most interesting output is when the kernel is broken. This will improve oops/crash/console message for better debugging. Instead, we force-poll until all output is emitted. Signed-off-by: Jeremy Fitzhardinge Cc: Stable Kernel diff --git a/drivers/char/hvc_xen.c b/drivers/char/hvc_xen.c index eba999f..a6ee32b 100644 --- a/drivers/char/hvc_xen.c +++ b/drivers/char/hvc_xen.c @@ -55,7 +55,7 @@ static inline void notify_daemon(void) notify_remote_via_evtchn(xen_start_info->console.domU.evtchn); } -static int write_console(uint32_t vtermno, const char *data, int len) +static int __write_console(const char *data, int len) { struct xencons_interface *intf = xencons_interface(); XENCONS_RING_IDX cons, prod; @@ -76,6 +76,29 @@ static int write_console(uint32_t vtermno, const char *data, int len) return sent; } +static int write_console(uint32_t vtermno, const char *data, int len) +{ + int ret = len; + + /* + * Make sure the whole buffer is emitted, polling if + * necessary. We don't ever want to rely on the hvc daemon + * because the most interesting console output is when the + * kernel is crippled. + */ + while (len) { + int sent = __write_console(data, len); + + data += sent; + len -= sent; + + if (unlikely(len)) + HYPERVISOR_sched_op(SCHEDOP_yield, NULL); + } + + return ret; +} + static int read_console(uint32_t vtermno, char *buf, int len) { struct xencons_interface *intf = xencons_interface(); -- cgit v0.10.2 From 82d6469916c6fcfa345636a49004c9d1753905d1 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Thu, 22 Oct 2009 16:41:15 -0700 Subject: xen: mask extended topology info in cpuid A Xen guest never needs to know about extended topology, and knowing would just confuse it. This patch just zeros ebx in leaf 0xb which indicates no topology info, preventing a crash under Xen on cpus which support this leaf. Signed-off-by: Jeremy Fitzhardinge Cc: Stable Kernel diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 23a4d80..dfbf70e 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -178,6 +178,7 @@ static __read_mostly unsigned int cpuid_leaf1_ecx_mask = ~0; static void xen_cpuid(unsigned int *ax, unsigned int *bx, unsigned int *cx, unsigned int *dx) { + unsigned maskebx = ~0; unsigned maskecx = ~0; unsigned maskedx = ~0; @@ -185,9 +186,16 @@ static void xen_cpuid(unsigned int *ax, unsigned int *bx, * Mask out inconvenient features, to try and disable as many * unsupported kernel subsystems as possible. */ - if (*ax == 1) { + switch (*ax) { + case 1: maskecx = cpuid_leaf1_ecx_mask; maskedx = cpuid_leaf1_edx_mask; + break; + + case 0xb: + /* Suppress extended topology stuff */ + maskebx = 0; + break; } asm(XEN_EMULATE_PREFIX "cpuid" @@ -197,6 +205,7 @@ static void xen_cpuid(unsigned int *ax, unsigned int *bx, "=d" (*dx) : "0" (*ax), "2" (*cx)); + *bx &= maskebx; *cx &= maskecx; *dx &= maskedx; } -- cgit v0.10.2 From 8c4db3355b0fcc9ad77431f15b955efa0645b5d0 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 3 Nov 2009 20:18:44 +0100 Subject: backing-dev: bdi sb prune should be in the unregister path, not destroy Commit 592b09a42fc3ae6737a0f3ecf4fee42ecd0296f8 was different from the tested path, in that it moved the bdi super_block prune from unregister to destroy context. This doesn't fully fix the sync hang bug on unexpected device removal, as need to prune the bdi cache pointer before killing flusher thread. Tested-by: Artur Skawina Signed-off-by: Jens Axboe diff --git a/mm/backing-dev.c b/mm/backing-dev.c index 1065b71..11aee09 100644 --- a/mm/backing-dev.c +++ b/mm/backing-dev.c @@ -628,6 +628,8 @@ static void bdi_prune_sb(struct backing_dev_info *bdi) void bdi_unregister(struct backing_dev_info *bdi) { if (bdi->dev) { + bdi_prune_sb(bdi); + if (!bdi_cap_flush_forker(bdi)) bdi_wb_shutdown(bdi); bdi_debug_unregister(bdi); @@ -697,7 +699,6 @@ void bdi_destroy(struct backing_dev_info *bdi) spin_unlock(&inode_lock); } - bdi_prune_sb(bdi); bdi_unregister(bdi); for (i = 0; i < NR_BDI_STAT_ITEMS; i++) -- cgit v0.10.2 From e6ec4fe24572ee265723d895ec4159e5559c8266 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 3 Nov 2009 20:21:35 +0100 Subject: cfq-iosched: fix bad return value cfq_should_preempt() Commit a6151c3a5c8e1ff5a28450bc8d6a99a2a0add0a7 inadvertently reversed a preempt condition check, potentially causing a performance regression. Make the meta check correct again. Signed-off-by: Jens Axboe diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 069a610..5802e32 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -2051,7 +2051,7 @@ cfq_should_preempt(struct cfq_data *cfqd, struct cfq_queue *new_cfqq, * it's a metadata request and the current queue is doing regular IO. */ if (rq_is_meta(rq) && !cfqq->meta_pending) - return false; + return true; /* * Allow an RT request to pre-empt an ongoing non-RT cfqq timeslice. -- cgit v0.10.2 From 4b27e1bb442e964903f8a3fa6bdf33a602dc0941 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Tue, 3 Nov 2009 20:25:02 +0100 Subject: cfq-iosched: limit coop preemption CFQ has an optimization for cooperated applications. if several io-context have close requests, they will get boost. But the optimization get abused. Considering thread a, b, which work on one file. a reads sectors s, s+2, s+4, ...; b reads sectors s+1, s+3, s +5, ... Both a and b are sequential read, so they can open idle window. a reads a sector s and goes to idle window and wakeup b. b reads sector s+1, since in current implementation, cfq_should_preempt() thinks a and b are cooperators, b will preempt a. b then reads sector s+1 and goes to idle window and wakeup a. for the same reason, a will preempt b and reads s+2. a and b will continue the circle. The circle will be very long, and a and b will occupy whole disk queue. Other applications will nearly have no chance to run. Fix this limiting coop preempt until a queue is scheduled normally again. Signed-off-by: Shaohua Li Acked-by: Jeff Moyer Signed-off-by: Jens Axboe diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 5802e32..aa1e953 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -196,6 +196,7 @@ enum cfqq_state_flags { CFQ_CFQQ_FLAG_slice_new, /* no requests dispatched in slice */ CFQ_CFQQ_FLAG_sync, /* synchronous queue */ CFQ_CFQQ_FLAG_coop, /* has done a coop jump of the queue */ + CFQ_CFQQ_FLAG_coop_preempt, /* coop preempt */ }; #define CFQ_CFQQ_FNS(name) \ @@ -222,6 +223,7 @@ CFQ_CFQQ_FNS(prio_changed); CFQ_CFQQ_FNS(slice_new); CFQ_CFQQ_FNS(sync); CFQ_CFQQ_FNS(coop); +CFQ_CFQQ_FNS(coop_preempt); #undef CFQ_CFQQ_FNS #define cfq_log_cfqq(cfqd, cfqq, fmt, args...) \ @@ -945,10 +947,13 @@ static struct cfq_queue *cfq_set_active_queue(struct cfq_data *cfqd, { if (!cfqq) { cfqq = cfq_get_next_queue(cfqd); - if (cfqq) + if (cfqq && !cfq_cfqq_coop_preempt(cfqq)) cfq_clear_cfqq_coop(cfqq); } + if (cfqq) + cfq_clear_cfqq_coop_preempt(cfqq); + __cfq_set_active_queue(cfqd, cfqq); return cfqq; } @@ -2066,8 +2071,16 @@ cfq_should_preempt(struct cfq_data *cfqd, struct cfq_queue *new_cfqq, * if this request is as-good as one we would expect from the * current cfqq, let it preempt */ - if (cfq_rq_close(cfqd, rq)) + if (cfq_rq_close(cfqd, rq) && (!cfq_cfqq_coop(new_cfqq) || + cfqd->busy_queues == 1)) { + /* + * Mark new queue coop_preempt, so its coop flag will not be + * cleared when new queue gets scheduled at the very first time + */ + cfq_mark_cfqq_coop_preempt(new_cfqq); + cfq_mark_cfqq_coop(new_cfqq); return true; + } return false; } -- cgit v0.10.2 From e65cc194f7628ecaa02462f22f42fb09b50dcd49 Mon Sep 17 00:00:00 2001 From: Mark Nelson Date: Tue, 3 Nov 2009 20:06:48 +1100 Subject: ahci: Enable SB600 64bit DMA on MSI K9A2 Platinum v2 Like the Asus M2A-VM, MSI's K9A2 Platinum (MS-7376) can also support 64bit DMA. It is a new enough board that all the BIOS releases work correctly with 64bit DMA enabled. Signed-off-by: Mark Nelson Signed-off-by: Jeff Garzik diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index a06f5d6..a3241a1 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -2718,6 +2718,30 @@ static bool ahci_sb600_enable_64bit(struct pci_dev *pdev) }, .driver_data = "20071026", /* yyyymmdd */ }, + /* + * All BIOS versions for the MSI K9A2 Platinum (MS-7376) + * support 64bit DMA. + * + * BIOS versions earlier than 1.5 had the Manufacturer DMI + * fields as "MICRO-STAR INTERANTIONAL CO.,LTD". + * This spelling mistake was fixed in BIOS version 1.5, so + * 1.5 and later have the Manufacturer as + * "MICRO-STAR INTERNATIONAL CO.,LTD". + * So try to match on DMI_BOARD_VENDOR of "MICRO-STAR INTER". + * + * BIOS versions earlier than 1.9 had a Board Product Name + * DMI field of "MS-7376". This was changed to be + * "K9A2 Platinum (MS-7376)" in version 1.9, but we can still + * match on DMI_BOARD_NAME of "MS-7376". + */ + { + .ident = "MSI K9A2 Platinum", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, + "MICRO-STAR INTER"), + DMI_MATCH(DMI_BOARD_NAME, "MS-7376"), + }, + }, { } }; const struct dmi_system_id *match; @@ -2729,18 +2753,24 @@ static bool ahci_sb600_enable_64bit(struct pci_dev *pdev) !match) return false; + if (!match->driver_data) + goto enable_64bit; + dmi_get_date(DMI_BIOS_DATE, &year, &month, &date); snprintf(buf, sizeof(buf), "%04d%02d%02d", year, month, date); - if (strcmp(buf, match->driver_data) >= 0) { - dev_printk(KERN_WARNING, &pdev->dev, "%s: enabling 64bit DMA\n", - match->ident); - return true; - } else { + if (strcmp(buf, match->driver_data) >= 0) + goto enable_64bit; + else { dev_printk(KERN_WARNING, &pdev->dev, "%s: BIOS too old, " "forcing 32bit DMA, update BIOS\n", match->ident); return false; } + +enable_64bit: + dev_printk(KERN_WARNING, &pdev->dev, "%s: enabling 64bit DMA\n", + match->ident); + return true; } static bool ahci_broken_system_poweroff(struct pci_dev *pdev) -- cgit v0.10.2 From a1104016ce8f7750ecd8ca6129786bc549aa5c38 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 17 Oct 2009 08:41:47 +0200 Subject: drivers/ata/libata: Move dereference after NULL test In each case, if the NULL test on qc is needed, then the derefernce should be after the NULL test. A simplified version of the semantic match that detects this problem is as follows (http://coccinelle.lip6.fr/): // @match exists@ expression x, E; identifier fld; @@ * x->fld ... when != \(x = E\|&x\) * x == NULL // Signed-off-by: Julia Lawall Signed-off-by: Jeff Garzik diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index d7f0f1b..dc72690 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4919,10 +4919,11 @@ struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev) */ void ata_qc_free(struct ata_queued_cmd *qc) { - struct ata_port *ap = qc->ap; + struct ata_port *ap; unsigned int tag; WARN_ON_ONCE(qc == NULL); /* ata_qc_from_tag _might_ return NULL */ + ap = qc->ap; qc->flags = 0; tag = qc->tag; @@ -4934,11 +4935,13 @@ void ata_qc_free(struct ata_queued_cmd *qc) void __ata_qc_complete(struct ata_queued_cmd *qc) { - struct ata_port *ap = qc->ap; - struct ata_link *link = qc->dev->link; + struct ata_port *ap; + struct ata_link *link; WARN_ON_ONCE(qc == NULL); /* ata_qc_from_tag _might_ return NULL */ WARN_ON_ONCE(!(qc->flags & ATA_QCFLAG_ACTIVE)); + ap = qc->ap; + link = qc->dev->link; if (likely(qc->flags & ATA_QCFLAG_DMAMAP)) ata_sg_clean(qc); -- cgit v0.10.2 From f38e35b43f2924b3b4e51147b7193f32e9276db4 Mon Sep 17 00:00:00 2001 From: "JosephChan@via.com.tw" Date: Mon, 2 Nov 2009 19:36:08 +0800 Subject: sata_via: Remove redundant device ID for VIA VT8261 Just remove redundant device ID for VIA VT8261. The device ID 0x9000 and 0x9040 are redundant (for VT8261). The 0x9040 is reserved for other usage. Signed-off-by: Joseph Chan Signed-off-by: Jeff Garzik diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index bdd43c7..02efd9a 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -93,7 +93,6 @@ static const struct pci_device_id svia_pci_tbl[] = { { PCI_VDEVICE(VIA, 0x7372), vt6420 }, { PCI_VDEVICE(VIA, 0x5287), vt8251 }, /* 2 sata chnls (Master/Slave) */ { PCI_VDEVICE(VIA, 0x9000), vt8251 }, - { PCI_VDEVICE(VIA, 0x9040), vt8251 }, { } /* terminate list */ }; -- cgit v0.10.2 From b419148e567728f6af0c3b01965c1cc141e3e13a Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 3 Nov 2009 11:37:49 -0800 Subject: Linux 2.6.32-rc6 diff --git a/Makefile b/Makefile index 9425d1d..b4c04f7 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 32 -EXTRAVERSION = -rc5 +EXTRAVERSION = -rc6 NAME = Man-Eating Seals of Antiquity # *DOCUMENTATION* -- cgit v0.10.2 From 109f55651954def97fa41ee71c464d268c512ab0 Mon Sep 17 00:00:00 2001 From: Mingming Date: Tue, 10 Nov 2009 10:48:08 -0500 Subject: ext4: fix ext4_ext_direct_IO()'s return value after converting uninit extents After a direct I/O request covering an uninitalized extent (i.e., created using the fallocate system call) or a hole in a file, ext4 will convert the uninitialized extent so it is marked as initialized by calling ext4_convert_unwritten_extents(). This function returns zero on success. This return value was getting returned by ext4_direct_IO(); however the file system's direct_IO function is supposed to return the number of bytes read or written on a success. By returning zero, it confused the direct I/O code into falling back to buffered I/O unnecessarily. Signed-off-by: Mingming Cao Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 10539e3..441716f 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -3519,6 +3519,7 @@ retry: * * This function is called from the direct IO end io call back * function, to convert the fallocated extents after IO is completed. + * Returns 0 on success. */ int ext4_convert_unwritten_extents(struct inode *inode, loff_t offset, loff_t len) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index d1ec698..12d727f 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -3772,13 +3772,17 @@ static ssize_t ext4_ext_direct_IO(int rw, struct kiocb *iocb, if (ret != -EIOCBQUEUED && ret <= 0 && iocb->private) { ext4_free_io_end(iocb->private); iocb->private = NULL; - } else if (ret > 0) + } else if (ret > 0) { + int err; /* * for non AIO case, since the IO is already * completed, we could do the convertion right here */ - ret = ext4_convert_unwritten_extents(inode, - offset, ret); + err = ext4_convert_unwritten_extents(inode, + offset, ret); + if (err < 0) + ret = err; + } return ret; } -- cgit v0.10.2 From 5f5249507e4b5c4fc0f9c93f33d133d8c95f47e1 Mon Sep 17 00:00:00 2001 From: Mingming Date: Tue, 10 Nov 2009 10:48:04 -0500 Subject: ext4: skip conversion of uninit extents after direct IO if there isn't any At the end of direct I/O operation, ext4_ext_direct_IO() always called ext4_convert_unwritten_extents(), regardless of whether there were any unwritten extents involved in the I/O or not. This commit adds a state flag so that ext4_ext_direct_IO() only calls ext4_convert_unwritten_extents() when necessary. Signed-off-by: Mingming Cao Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index 00d153f..8825515 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -322,6 +322,7 @@ static inline __u32 ext4_mask_flags(umode_t mode, __u32 flags) #define EXT4_STATE_NO_EXPAND 0x00000008 /* No space for expansion */ #define EXT4_STATE_DA_ALLOC_CLOSE 0x00000010 /* Alloc DA blks on close */ #define EXT4_STATE_EXT_MIGRATE 0x00000020 /* Inode is migrating */ +#define EXT4_STATE_DIO_UNWRITTEN 0x00000040 /* need convert on dio done*/ /* Used to pass group descriptor data when online resize is done */ struct ext4_new_group_input { diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 441716f..e991ae2 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -3048,12 +3048,18 @@ ext4_ext_handle_uninitialized_extents(handle_t *handle, struct inode *inode, ret = ext4_split_unwritten_extents(handle, inode, path, iblock, max_blocks, flags); - /* flag the io_end struct that we need convert when IO done */ + /* + * Flag the inode(non aio case) or end_io struct (aio case) + * that this IO needs to convertion to written when IO is + * completed + */ if (io) io->flag = DIO_AIO_UNWRITTEN; + else + EXT4_I(inode)->i_state |= EXT4_STATE_DIO_UNWRITTEN; goto out; } - /* DIO end_io complete, convert the filled extent to written */ + /* async DIO end_io complete, convert the filled extent to written */ if (flags == EXT4_GET_BLOCKS_DIO_CONVERT_EXT) { ret = ext4_convert_unwritten_extents_dio(handle, inode, path); @@ -3295,10 +3301,16 @@ int ext4_ext_get_blocks(handle_t *handle, struct inode *inode, * To avoid unecessary convertion for every aio dio rewrite * to the mid of file, here we flag the IO that is really * need the convertion. - * + * For non asycn direct IO case, flag the inode state + * that we need to perform convertion when IO is done. */ - if (io && flags == EXT4_GET_BLOCKS_DIO_CREATE_EXT) - io->flag = DIO_AIO_UNWRITTEN; + if (flags == EXT4_GET_BLOCKS_DIO_CREATE_EXT) { + if (io) + io->flag = DIO_AIO_UNWRITTEN; + else + EXT4_I(inode)->i_state |= + EXT4_STATE_DIO_UNWRITTEN;; + } } err = ext4_ext_insert_extent(handle, inode, path, &newex, flags); if (err) { diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 12d727f..a9ed2bc 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -3772,7 +3772,8 @@ static ssize_t ext4_ext_direct_IO(int rw, struct kiocb *iocb, if (ret != -EIOCBQUEUED && ret <= 0 && iocb->private) { ext4_free_io_end(iocb->private); iocb->private = NULL; - } else if (ret > 0) { + } else if (ret > 0 && (EXT4_I(inode)->i_state & + EXT4_STATE_DIO_UNWRITTEN)) { int err; /* * for non AIO case, since the IO is already @@ -3782,6 +3783,7 @@ static ssize_t ext4_ext_direct_IO(int rw, struct kiocb *iocb, offset, ret); if (err < 0) ret = err; + EXT4_I(inode)->i_state &= ~EXT4_STATE_DIO_UNWRITTEN; } return ret; } -- cgit v0.10.2 From 4b70df181611012a3556f017b57dfcef7e1d279f Mon Sep 17 00:00:00 2001 From: Mingming Date: Tue, 3 Nov 2009 14:44:54 -0500 Subject: ext4: code clean up for dio fallocate handling The ext4_debug() call in ext4_end_io_dio() should be moved after the check to make sure that io_end is non-NULL. The comment above ext4_get_block_dio_write() ("Maximum number of blocks...") is a duplicate; the original and correct comment is above the #define DIO_MAX_BLOCKS up above. Based on review comments from Curt Wohlgemuth. Signed-off-by: Mingming Cao Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index a9ed2bc..2c8caa5 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -3446,8 +3446,6 @@ out: return ret; } -/* Maximum number of blocks we map for direct IO at once. */ - static int ext4_get_block_dio_write(struct inode *inode, sector_t iblock, struct buffer_head *bh_result, int create) { @@ -3655,13 +3653,14 @@ static void ext4_end_io_dio(struct kiocb *iocb, loff_t offset, ext4_io_end_t *io_end = iocb->private; struct workqueue_struct *wq; + /* if not async direct IO or dio with 0 bytes write, just return */ + if (!io_end || !size) + return; + ext_debug("ext4_end_io_dio(): io_end 0x%p" "for inode %lu, iocb 0x%p, offset %llu, size %llu\n", iocb->private, io_end->inode->i_ino, iocb, offset, size); - /* if not async direct IO or dio with 0 bytes write, just return */ - if (!io_end || !size) - return; /* if not aio dio with unwritten extents, just free io and return */ if (io_end->flag != DIO_AIO_UNWRITTEN){ -- cgit v0.10.2 From 560235857fb79da48d36e8f866a0ee3b10a232bf Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 2 Aug 2009 10:47:27 +0200 Subject: arch/m32r: Use DIV_ROUND_CLOSEST The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d but is perhaps more readable. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // @haskernel@ @@ @depends on haskernel@ expression x,__divisor; @@ - (((x) + ((__divisor) / 2)) / (__divisor)) + DIV_ROUND_CLOSEST(x,__divisor) // Signed-off-by: Julia Lawall Signed-off-by: Hirokazu Takata diff --git a/arch/m32r/kernel/time.c b/arch/m32r/kernel/time.c index e7fee0f1..9cedcef 100644 --- a/arch/m32r/kernel/time.c +++ b/arch/m32r/kernel/time.c @@ -75,7 +75,7 @@ u32 arch_gettimeoffset(void) count = 0; count = (latch - count) * TICK_SIZE; - elapsed_time = (count + latch / 2) / latch; + elapsed_time = DIV_ROUND_CLOSEST(count, latch); /* NOTE: LATCH is equal to the "interval" value (= reload count). */ #else /* CONFIG_SMP */ @@ -93,7 +93,7 @@ u32 arch_gettimeoffset(void) p_count = count; count = (latch - count) * TICK_SIZE; - elapsed_time = (count + latch / 2) / latch; + elapsed_time = DIV_ROUND_CLOSEST(count, latch); /* NOTE: LATCH is equal to the "interval" value (= reload count). */ #endif /* CONFIG_SMP */ #elif defined(CONFIG_CHIP_M32310) @@ -211,7 +211,7 @@ void __init time_init(void) bus_clock = boot_cpu_data.bus_clock; divide = boot_cpu_data.timer_divide; - latch = (bus_clock/divide + HZ / 2) / HZ; + latch = DIV_ROUND_CLOSEST(bus_clock/divide, HZ); printk("Timer start : latch = %ld\n", latch); -- cgit v0.10.2 From e968b8d404ae8ab4ef218cd145f6dcb71e65154b Mon Sep 17 00:00:00 2001 From: Hirokazu Takata Date: Mon, 5 Oct 2009 00:10:55 +0900 Subject: m32r: add NOTES to vmlinux.lds.S to remove .note.gnu.build-id section Building with --build-id option, .note.gnu.build-id section is added to vmlinux.bin. But some old buggy binutils creates a huge vmlinux.bin, and a bootloader fails to boot its zImage as well. This patch adds a NOTES macro to a linker script vmlinux.ld.S to put .note.gnu.build-id section into .note section. Then, the .note section will be removed, because "-R .note" option is specified in OBJCOPYFLAGS to make a vmlinux.bin binary. Signed-off-by: Hirokazu Takata diff --git a/arch/m32r/kernel/vmlinux.lds.S b/arch/m32r/kernel/vmlinux.lds.S index 8ceb618..7da94ea 100644 --- a/arch/m32r/kernel/vmlinux.lds.S +++ b/arch/m32r/kernel/vmlinux.lds.S @@ -42,6 +42,8 @@ SECTIONS _etext = .; /* End of text section */ EXCEPTION_TABLE(16) + NOTES + RODATA RW_DATA_SECTION(32, PAGE_SIZE, THREAD_SIZE) _edata = .; /* End of data section */ -- cgit v0.10.2 From 337214e8c6b0c777713b2483749f9c03102a416c Mon Sep 17 00:00:00 2001 From: Hirokazu Takata Date: Thu, 15 Oct 2009 09:21:56 +0900 Subject: m32r: bzip2/lzma kernel compression support - Support bzip2 and lzma kernel compression for m32r. - Clean up arch/m32r/boot/compressed/misc.c. Signed-off-by: Hirokazu Takata diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig index c41234f..3a9319f 100644 --- a/arch/m32r/Kconfig +++ b/arch/m32r/Kconfig @@ -11,6 +11,9 @@ config M32R select HAVE_IDE select HAVE_OPROFILE select INIT_ALL_POSSIBLE + select HAVE_KERNEL_GZIP + select HAVE_KERNEL_BZIP2 + select HAVE_KERNEL_LZMA config SBUS bool diff --git a/arch/m32r/boot/compressed/Makefile b/arch/m32r/boot/compressed/Makefile index 560484a..1003880 100644 --- a/arch/m32r/boot/compressed/Makefile +++ b/arch/m32r/boot/compressed/Makefile @@ -4,8 +4,8 @@ # create a compressed vmlinux image from the original vmlinux # -targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o \ - piggy.o vmlinux.lds +targets := vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 \ + vmlinux.bin.lzma head.o misc.o piggy.o vmlinux.lds OBJECTS = $(obj)/head.o $(obj)/misc.o @@ -27,6 +27,12 @@ $(obj)/vmlinux.bin: vmlinux FORCE $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE $(call if_changed,gzip) +$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE + $(call if_changed,bzip2) + +$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE + $(call if_changed,lzma) + CFLAGS_misc.o += -fpic ifdef CONFIG_MMU @@ -37,5 +43,9 @@ endif OBJCOPYFLAGS += -R .empty_zero_page -$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE +suffix_$(CONFIG_KERNEL_GZIP) = gz +suffix_$(CONFIG_KERNEL_BZIP2) = bz2 +suffix_$(CONFIG_KERNEL_LZMA) = lzma + +$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix_y) FORCE $(call if_changed,ld) diff --git a/arch/m32r/boot/compressed/misc.c b/arch/m32r/boot/compressed/misc.c index d394292..370d608 100644 --- a/arch/m32r/boot/compressed/misc.c +++ b/arch/m32r/boot/compressed/misc.c @@ -9,140 +9,49 @@ * Adapted for SH by Stuart Menefy, Aug 1999 * * 2003-02-12: Support M32R by Takeo Takahashi - * This is based on arch/sh/boot/compressed/misc.c. */ -#include - /* * gzip declarations */ - -#define OF(args) args #define STATIC static #undef memset #undef memcpy #define memzero(s, n) memset ((s), 0, (n)) -typedef unsigned char uch; -typedef unsigned short ush; -typedef unsigned long ulg; - -#define WSIZE 0x8000 /* Window size must be at least 32k, */ - /* and a power of two */ - -static uch *inbuf; /* input buffer */ -static uch window[WSIZE]; /* Sliding window buffer */ - -static unsigned insize = 0; /* valid bytes in inbuf */ -static unsigned inptr = 0; /* index of next byte to be processed in inbuf */ -static unsigned outcnt = 0; /* bytes in output buffer */ - -/* gzip flag byte */ -#define ASCII_FLAG 0x01 /* bit 0 set: file probably ASCII text */ -#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */ -#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */ -#define ORIG_NAME 0x08 /* bit 3 set: original file name present */ -#define COMMENT 0x10 /* bit 4 set: file comment present */ -#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */ -#define RESERVED 0xC0 /* bit 6,7: reserved */ - -#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf()) - -/* Diagnostic functions */ -#ifdef DEBUG -# define Assert(cond,msg) {if(!(cond)) error(msg);} -# define Trace(x) fprintf x -# define Tracev(x) {if (verbose) fprintf x ;} -# define Tracevv(x) {if (verbose>1) fprintf x ;} -# define Tracec(c,x) {if (verbose && (c)) fprintf x ;} -# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;} -#else -# define Assert(cond,msg) -# define Trace(x) -# define Tracev(x) -# define Tracevv(x) -# define Tracec(c,x) -# define Tracecv(c,x) -#endif - -static int fill_inbuf(void); -static void flush_window(void); static void error(char *m); -static unsigned char *input_data; -static int input_len; - -static long bytes_out = 0; -static uch *output_data; -static unsigned long output_ptr = 0; - #include "m32r_sio.c" static unsigned long free_mem_ptr; static unsigned long free_mem_end_ptr; -#define HEAP_SIZE 0x10000 - -#include "../../../../lib/inflate.c" - -void* memset(void* s, int c, size_t n) +#ifdef CONFIG_KERNEL_BZIP2 +static void *memset(void *s, int c, size_t n) { - int i; - char *ss = (char*)s; + char *ss = s; - for (i=0;i> 8); - } - crc = c; - bytes_out += (ulg)outcnt; - output_ptr += (ulg)outcnt; - outcnt = 0; -} +#ifdef CONFIG_KERNEL_LZMA +#define BOOT_HEAP_SIZE 0x10000 +#include "../../../../lib/decompress_unlzma.c" +#endif static void error(char *x) { @@ -153,20 +62,20 @@ static void error(char *x) while(1); /* Halt */ } -/* return decompressed size */ void decompress_kernel(int mmu_on, unsigned char *zimage_data, unsigned int zimage_len, unsigned long heap) { + unsigned char *input_data = zimage_data; + int input_len = zimage_len; + unsigned char *output_data; + output_data = (unsigned char *)CONFIG_MEMORY_START + 0x2000 + (mmu_on ? 0x80000000 : 0); free_mem_ptr = heap; - free_mem_end_ptr = free_mem_ptr + HEAP_SIZE; - input_data = zimage_data; - input_len = zimage_len; + free_mem_end_ptr = free_mem_ptr + BOOT_HEAP_SIZE; - makecrc(); - puts("Uncompressing Linux... "); - gunzip(); - puts("Ok, booting the kernel.\n"); + puts("\nDecompressing Linux... "); + decompress(input_data, input_len, NULL, NULL, output_data, NULL, error); + puts("done.\nBooting the kernel.\n"); } -- cgit v0.10.2 From 45cdd473301aae36e1f10664b9fe7ef5aad3f182 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Sun, 1 Nov 2009 15:33:06 +0100 Subject: m32r: Should index be positive? Index `ipi_num' is signed, test whether it is negative to make sure we don't get a negative array element. Signed-off-by: Roel Kluin Signed-off-by: Hirokazu Takata diff --git a/arch/m32r/kernel/smp.c b/arch/m32r/kernel/smp.c index 8a88f1f..31cef20 100644 --- a/arch/m32r/kernel/smp.c +++ b/arch/m32r/kernel/smp.c @@ -806,7 +806,7 @@ unsigned long send_IPI_mask_phys(cpumask_t physid_mask, int ipi_num, if (mask & ~physids_coerce(phys_cpu_present_map)) BUG(); - if (ipi_num >= NR_IPIS) + if (ipi_num >= NR_IPIS || ipi_num < 0) BUG(); mask <<= IPI_SHIFT; -- cgit v0.10.2 From df67bed92fa86ef926da8b62a6da68722388ff72 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 30 Oct 2009 13:31:26 +1000 Subject: drm/radeon/kms: fix coherency issues on AGP cards. When we are evicting from VRAM->RAM we allocate the ttm object, but we don't set the caching policy on it before blitting into it. This means on AGP we end up blitting into cached pages, and the CPU later flushes out on top of them. This was mostly seen as font corruption. The other question is why we don't evict VRAM->GTT in a lot of cases, this would save us some cache transitions since a lot of objects that are evicted from VRAM will probably end up being pulled back in a few operations later, and evicting them to system memory involves 2 unnecessary cache transitions. Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c index c729cd1..f489c0d 100644 --- a/drivers/gpu/drm/radeon/radeon_ttm.c +++ b/drivers/gpu/drm/radeon/radeon_ttm.c @@ -295,6 +295,12 @@ static int radeon_move_vram_ram(struct ttm_buffer_object *bo, if (unlikely(r)) { return r; } + + r = ttm_tt_set_placement_caching(bo->ttm, tmp_mem.placement); + if (unlikely(r)) { + goto out_cleanup; + } + r = ttm_tt_bind(bo->ttm, &tmp_mem); if (unlikely(r)) { goto out_cleanup; diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c index a55ee1a..7bcb89f 100644 --- a/drivers/gpu/drm/ttm/ttm_tt.c +++ b/drivers/gpu/drm/ttm/ttm_tt.c @@ -279,6 +279,7 @@ int ttm_tt_set_placement_caching(struct ttm_tt *ttm, uint32_t placement) return ttm_tt_set_caching(ttm, state); } +EXPORT_SYMBOL(ttm_tt_set_placement_caching); static void ttm_tt_free_alloced_pages(struct ttm_tt *ttm) { -- cgit v0.10.2 From d6f28938d9426d12eea1578949f1d73d24ad37ec Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 2 Nov 2009 16:01:27 -0500 Subject: drm/radeon/kms: Don't RMW CP_RB_CNTL Immediate readback seems faulty on some chips. I suspect it takes a while to get through the fifo to the actual register backbone. There's no need to read it back, so, just write the driver's copy of the register's value directly. Should fix bug 24535 and possibly 24218 Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index b438b52..5e821a3 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -578,19 +578,19 @@ int r100_cp_init(struct radeon_device *rdev, unsigned ring_size) indirect1_start = 16; /* cp setup */ WREG32(0x718, pre_write_timer | (pre_write_limit << 28)); - WREG32(RADEON_CP_RB_CNTL, -#ifdef __BIG_ENDIAN - RADEON_BUF_SWAP_32BIT | -#endif - REG_SET(RADEON_RB_BUFSZ, rb_bufsz) | + tmp = (REG_SET(RADEON_RB_BUFSZ, rb_bufsz) | REG_SET(RADEON_RB_BLKSZ, rb_blksz) | REG_SET(RADEON_MAX_FETCH, max_fetch) | RADEON_RB_NO_UPDATE); +#ifdef __BIG_ENDIAN + tmp |= RADEON_BUF_SWAP_32BIT; +#endif + WREG32(RADEON_CP_RB_CNTL, tmp); + /* Set ring address */ DRM_INFO("radeon: ring at 0x%016lX\n", (unsigned long)rdev->cp.gpu_addr); WREG32(RADEON_CP_RB_BASE, rdev->cp.gpu_addr); /* Force read & write ptr to 0 */ - tmp = RREG32(RADEON_CP_RB_CNTL); WREG32(RADEON_CP_RB_CNTL, tmp | RADEON_RB_RPTR_WR_ENA); WREG32(RADEON_CP_RB_RPTR_WR, 0); WREG32(RADEON_CP_RB_WPTR, 0); diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index e87475c..60fbb23 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -1272,19 +1272,17 @@ int r600_cp_resume(struct radeon_device *rdev) /* Set ring buffer size */ rb_bufsz = drm_order(rdev->cp.ring_size / 8); + tmp = RB_NO_UPDATE | (drm_order(RADEON_GPU_PAGE_SIZE/8) << 8) | rb_bufsz; #ifdef __BIG_ENDIAN - WREG32(CP_RB_CNTL, BUF_SWAP_32BIT | RB_NO_UPDATE | - (drm_order(RADEON_GPU_PAGE_SIZE/8) << 8) | rb_bufsz); -#else - WREG32(CP_RB_CNTL, RB_NO_UPDATE | (drm_order(RADEON_GPU_PAGE_SIZE/8) << 8) | rb_bufsz); + tmp |= BUF_SWAP_32BIT; #endif + WREG32(CP_RB_CNTL, tmp); WREG32(CP_SEM_WAIT_TIMER, 0x4); /* Set the write pointer delay */ WREG32(CP_RB_WPTR_DELAY, 0); /* Initialize the ring buffer's read and write pointers */ - tmp = RREG32(CP_RB_CNTL); WREG32(CP_RB_CNTL, tmp | RB_RPTR_WR_ENA); WREG32(CP_RB_RPTR_WR, 0); WREG32(CP_RB_WPTR, 0); -- cgit v0.10.2 From 8a9832e89ff1bc7a039c8f966f07101570be3d5e Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 3 Nov 2009 13:23:15 +1000 Subject: drm/radeon/kms: disable D1VGA and D2VGA if enabled Once kms is enabled we don't need these, and it causes a problem with the Lenovo W500 ACPI brightness implementation, it hangs in a loop inside an SMI. Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c index 41a34c2..03c052d 100644 --- a/drivers/gpu/drm/radeon/rv515.c +++ b/drivers/gpu/drm/radeon/rv515.c @@ -137,6 +137,8 @@ int rv515_mc_wait_for_idle(struct radeon_device *rdev) void rv515_vga_render_disable(struct radeon_device *rdev) { + WREG32(R_000330_D1VGA_CONTROL, 0); + WREG32(R_000338_D2VGA_CONTROL, 0); WREG32(R_000300_VGA_RENDER_CONTROL, RREG32(R_000300_VGA_RENDER_CONTROL) & C_000300_VGA_VSTATUS_CNTL); } -- cgit v0.10.2 From 4d357abb895ec51f1cbdebb1fbbf4d4576900a2e Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 3 Nov 2009 14:54:36 +1000 Subject: drm/radeon/kms: stop putting VRAM at 0 in MC space on r600s. The Lenovo W500 laptop hangs inside an SMI on brightness changes, I thought it just needed the VGA disable but it turned out to require slightly more work, setting the MC locations up just like the IGP chip requirements seems to make it all happy again and I can boot and play with brightness. We should probably just do this for all chips and give up the VRAM at 0x0 idea, it never seems to buy us anything but pain. Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 60fbb23..3e5703f 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -409,35 +409,29 @@ int r600_mc_init(struct radeon_device *rdev) rdev->mc.gtt_location = rdev->mc.mc_vram_size; } } else { - if (rdev->family == CHIP_RS780 || rdev->family == CHIP_RS880) { - rdev->mc.vram_location = (RREG32(MC_VM_FB_LOCATION) & - 0xFFFF) << 24; - rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024; - tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size; - if ((0xFFFFFFFFUL - tmp) >= rdev->mc.gtt_size) { - /* Enough place after vram */ - rdev->mc.gtt_location = tmp; - } else if (rdev->mc.vram_location >= rdev->mc.gtt_size) { - /* Enough place before vram */ + rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024; + rdev->mc.vram_location = (RREG32(MC_VM_FB_LOCATION) & + 0xFFFF) << 24; + tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size; + if ((0xFFFFFFFFUL - tmp) >= rdev->mc.gtt_size) { + /* Enough place after vram */ + rdev->mc.gtt_location = tmp; + } else if (rdev->mc.vram_location >= rdev->mc.gtt_size) { + /* Enough place before vram */ + rdev->mc.gtt_location = 0; + } else { + /* Not enough place after or before shrink + * gart size + */ + if (rdev->mc.vram_location > (0xFFFFFFFFUL - tmp)) { rdev->mc.gtt_location = 0; + rdev->mc.gtt_size = rdev->mc.vram_location; } else { - /* Not enough place after or before shrink - * gart size - */ - if (rdev->mc.vram_location > (0xFFFFFFFFUL - tmp)) { - rdev->mc.gtt_location = 0; - rdev->mc.gtt_size = rdev->mc.vram_location; - } else { - rdev->mc.gtt_location = tmp; - rdev->mc.gtt_size = 0xFFFFFFFFUL - tmp; - } + rdev->mc.gtt_location = tmp; + rdev->mc.gtt_size = 0xFFFFFFFFUL - tmp; } - rdev->mc.gtt_location = rdev->mc.mc_vram_size; - } else { - rdev->mc.vram_location = 0x00000000UL; - rdev->mc.gtt_location = rdev->mc.mc_vram_size; - rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024; } + rdev->mc.gtt_location = rdev->mc.mc_vram_size; } rdev->mc.vram_start = rdev->mc.vram_location; rdev->mc.vram_end = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1; -- cgit v0.10.2 From 6fa8d66af83710b3610bd3b2581f051074f2b416 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 3 Nov 2009 16:10:36 -0500 Subject: drm/radeon/kms: remove some misleading debugging output Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_bios.c b/drivers/gpu/drm/radeon/radeon_bios.c index 34a9b91..9069217 100644 --- a/drivers/gpu/drm/radeon/radeon_bios.c +++ b/drivers/gpu/drm/radeon/radeon_bios.c @@ -50,19 +50,16 @@ static bool igp_read_bios_from_vram(struct radeon_device *rdev) vram_base = drm_get_resource_start(rdev->ddev, 0); bios = ioremap(vram_base, size); if (!bios) { - DRM_ERROR("Unable to mmap vram\n"); return false; } if (size == 0 || bios[0] != 0x55 || bios[1] != 0xaa) { iounmap(bios); - DRM_ERROR("bad rom signature\n"); return false; } rdev->bios = kmalloc(size, GFP_KERNEL); if (rdev->bios == NULL) { iounmap(bios); - DRM_ERROR("kmalloc failed\n"); return false; } memcpy(rdev->bios, bios, size); -- cgit v0.10.2 From e29649db3bd5620499bf9bdcd63c5cf12edbd26e Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 3 Nov 2009 10:04:01 -0500 Subject: drm/radeon/kms/r700: fix some typos in chip init Noticed by Andre on IRC. Also fix up some minor whitespace issues. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index 4055391..ae074fd 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -529,11 +529,11 @@ static void rv770_gpu_init(struct radeon_device *rdev) if (rdev->family == CHIP_RV770) gb_tiling_config |= BANK_TILING(1); else - gb_tiling_config |= BANK_TILING((mc_arb_ramcfg & NOOFBANK_SHIFT) >> NOOFBANK_MASK); + gb_tiling_config |= BANK_TILING((mc_arb_ramcfg & NOOFBANK_MASK) >> NOOFBANK_SHIFT); gb_tiling_config |= GROUP_SIZE(0); - if (((mc_arb_ramcfg & NOOFROWS_MASK) & NOOFROWS_SHIFT) > 3) { + if (((mc_arb_ramcfg & NOOFROWS_MASK) >> NOOFROWS_SHIFT) > 3) { gb_tiling_config |= ROW_TILING(3); gb_tiling_config |= SAMPLE_SPLIT(3); } else { @@ -579,14 +579,14 @@ static void rv770_gpu_init(struct radeon_device *rdev) /* set HW defaults for 3D engine */ WREG32(CP_QUEUE_THRESHOLDS, (ROQ_IB1_START(0x16) | - ROQ_IB2_START(0x2b))); + ROQ_IB2_START(0x2b))); WREG32(CP_MEQ_THRESHOLDS, STQ_SPLIT(0x30)); WREG32(TA_CNTL_AUX, (DISABLE_CUBE_ANISO | - SYNC_GRADIENT | - SYNC_WALKER | - SYNC_ALIGNER)); + SYNC_GRADIENT | + SYNC_WALKER | + SYNC_ALIGNER)); sx_debug_1 = RREG32(SX_DEBUG_1); sx_debug_1 |= ENABLE_NEW_SMX_ADDRESS; @@ -598,9 +598,9 @@ static void rv770_gpu_init(struct radeon_device *rdev) WREG32(SMX_DC_CTL0, smx_dc_ctl0); WREG32(SMX_EVENT_CTL, (ES_FLUSH_CTL(4) | - GS_FLUSH_CTL(4) | - ACK_FLUSH_CTL(3) | - SYNC_FLUSH_CTL)); + GS_FLUSH_CTL(4) | + ACK_FLUSH_CTL(3) | + SYNC_FLUSH_CTL)); if (rdev->family == CHIP_RV770) WREG32(DB_DEBUG3, DB_CLK_OFF_DELAY(0x1f)); @@ -611,12 +611,12 @@ static void rv770_gpu_init(struct radeon_device *rdev) } WREG32(SX_EXPORT_BUFFER_SIZES, (COLOR_BUFFER_SIZE((rdev->config.rv770.sx_max_export_size / 4) - 1) | - POSITION_BUFFER_SIZE((rdev->config.rv770.sx_max_export_pos_size / 4) - 1) | - SMX_BUFFER_SIZE((rdev->config.rv770.sx_max_export_smx_size / 4) - 1))); + POSITION_BUFFER_SIZE((rdev->config.rv770.sx_max_export_pos_size / 4) - 1) | + SMX_BUFFER_SIZE((rdev->config.rv770.sx_max_export_smx_size / 4) - 1))); WREG32(PA_SC_FIFO_SIZE, (SC_PRIM_FIFO_SIZE(rdev->config.rv770.sc_prim_fifo_size) | - SC_HIZ_TILE_FIFO_SIZE(rdev->config.rv770.sc_hiz_tile_fifo_size) | - SC_EARLYZ_TILE_FIFO_SIZE(rdev->config.rv770.sc_earlyz_tile_fifo_fize))); + SC_HIZ_TILE_FIFO_SIZE(rdev->config.rv770.sc_hiz_tile_fifo_size) | + SC_EARLYZ_TILE_FIFO_SIZE(rdev->config.rv770.sc_earlyz_tile_fifo_fize))); WREG32(PA_SC_MULTI_CHIP_CNTL, 0); -- cgit v0.10.2 From f7112949f6a4cd6883d66c882d568c2197321de6 Mon Sep 17 00:00:00 2001 From: Lai Jiangshan Date: Tue, 3 Nov 2009 19:42:45 +0800 Subject: ring-buffer: Synchronize resizing buffer with reader lock We got a sudden panic when we reduced the size of the ringbuffer. We can reproduce the panic by the following steps: echo 1 > events/sched/enable cat trace_pipe > /dev/null & while ((1)) do echo 12000 > buffer_size_kb echo 512 > buffer_size_kb done (not more than 5 seconds, panic ...) Reported-by: KOSAKI Motohiro Signed-off-by: Lai Jiangshan LKML-Reference: <4AF01735.9060409@cn.fujitsu.com> Signed-off-by: Steven Rostedt diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index 3ffa502..5dd017f 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -1193,6 +1193,7 @@ rb_remove_pages(struct ring_buffer_per_cpu *cpu_buffer, unsigned nr_pages) atomic_inc(&cpu_buffer->record_disabled); synchronize_sched(); + spin_lock_irq(&cpu_buffer->reader_lock); rb_head_page_deactivate(cpu_buffer); for (i = 0; i < nr_pages; i++) { @@ -1207,6 +1208,7 @@ rb_remove_pages(struct ring_buffer_per_cpu *cpu_buffer, unsigned nr_pages) return; rb_reset_cpu(cpu_buffer); + spin_unlock_irq(&cpu_buffer->reader_lock); rb_check_pages(cpu_buffer); -- cgit v0.10.2 From ed146b25942b428f8e8056587b7638ce76573c2f Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Tue, 3 Nov 2009 08:55:38 +0800 Subject: ftrace: Fix unmatched locking in ftrace_regex_write() When a command is passed to the set_ftrace_filter, then the ftrace_regex_lock is still held going back to user space. # echo 'do_open : foo' > set_ftrace_filter (still holding ftrace_regex_lock when returning to user space!) Signed-off-by: Li Zefan LKML-Reference: <4AEF7F8A.3080300@cn.fujitsu.com> Signed-off-by: Steven Rostedt diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 9c451a1..6dc4e5e 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -2222,15 +2222,15 @@ ftrace_regex_write(struct file *file, const char __user *ubuf, ret = ftrace_process_regex(parser->buffer, parser->idx, enable); if (ret) - goto out; + goto out_unlock; trace_parser_clear(parser); } ret = read; - +out_unlock: mutex_unlock(&ftrace_regex_lock); -out: + return ret; } -- cgit v0.10.2 From 5bdaaada16363d64e10ae081755d1a8d392429f2 Mon Sep 17 00:00:00 2001 From: Vitaliy Kulikov Date: Wed, 4 Nov 2009 07:57:45 +0100 Subject: ALSA: hda - Enable GPIO control for mute LED on HP systems This patch enables GPIO to control mute LED indicator on the HP systems with the special string in BIOS and applies it with the correct polarity on HP B-series systems. It also restores configuration of the pin intended as the second Headphone on HP B-series systems but configured as something else in the BIOS to pass MS DTM. Signed-off-by: Vitaliy Kulikov Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 66c0876..b513eba 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include #include @@ -1693,6 +1694,8 @@ static struct snd_pci_quirk stac92hd71bxx_cfg_tbl[] = { "DFI LanParty", STAC_92HD71BXX_REF), SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30fb, "HP dv4-1222nr", STAC_HP_DV4_1222NR), + SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x1720, + "HP", STAC_HP_DV5), SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x3080, "HP", STAC_HP_DV5), SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x30f0, @@ -4730,6 +4733,26 @@ static int stac92xx_resume(struct hda_codec *codec) return 0; } +static int hp_bseries_system(u32 subsystem_id) +{ + switch (subsystem_id) { + case 0x103c307e: + case 0x103c307f: + case 0x103c3080: + case 0x103c3081: + case 0x103c1722: + case 0x103c1723: + case 0x103c1724: + case 0x103c1725: + case 0x103c1726: + case 0x103c1727: + case 0x103c1728: + case 0x103c1729: + return 1; + } + return 0; +} + /* * using power check for controlling mute led of HP notebooks * check for mute state only on Speakers (nid = 0x10) @@ -4754,6 +4777,11 @@ static int stac92xx_hp_check_power_status(struct hda_codec *codec, else spec->gpio_data |= spec->gpio_led; /* white */ + if (hp_bseries_system(codec->subsystem_id)) { + /* LED state is inverted on these systems */ + spec->gpio_data ^= spec->gpio_led; + } + stac_gpio_set(codec, spec->gpio_mask, spec->gpio_dir, spec->gpio_data); @@ -5243,6 +5271,7 @@ static int patch_stac92hd71bxx(struct hda_codec *codec) { struct sigmatel_spec *spec; struct hda_verb *unmute_init = stac92hd71bxx_unmute_core_init; + unsigned int pin_cfg; int err = 0; spec = kzalloc(sizeof(*spec), GFP_KERNEL); @@ -5426,6 +5455,45 @@ again: break; } + if (hp_bseries_system(codec->subsystem_id)) { + pin_cfg = snd_hda_codec_get_pincfg(codec, 0x0f); + if (get_defcfg_device(pin_cfg) == AC_JACK_LINE_OUT || + get_defcfg_device(pin_cfg) == AC_JACK_SPEAKER || + get_defcfg_device(pin_cfg) == AC_JACK_HP_OUT) { + /* It was changed in the BIOS to just satisfy MS DTM. + * Lets turn it back into slaved HP + */ + pin_cfg = (pin_cfg & (~AC_DEFCFG_DEVICE)) + | (AC_JACK_HP_OUT << + AC_DEFCFG_DEVICE_SHIFT); + pin_cfg = (pin_cfg & (~(AC_DEFCFG_DEF_ASSOC + | AC_DEFCFG_SEQUENCE))) + | 0x1f; + snd_hda_codec_set_pincfg(codec, 0x0f, pin_cfg); + } + } + + if ((codec->subsystem_id >> 16) == PCI_VENDOR_ID_HP) { + const struct dmi_device *dev = NULL; + while ((dev = dmi_find_device(DMI_DEV_TYPE_OEM_STRING, + NULL, dev))) { + if (strcmp(dev->name, "HP_Mute_LED_1")) { + switch (codec->vendor_id) { + case 0x111d7608: + spec->gpio_led = 0x01; + break; + case 0x111d7600: + case 0x111d7601: + case 0x111d7602: + case 0x111d7603: + spec->gpio_led = 0x08; + break; + } + break; + } + } + } + #ifdef CONFIG_SND_HDA_POWER_SAVE if (spec->gpio_led) { spec->gpio_mask |= spec->gpio_led; -- cgit v0.10.2 From f60311d5f7670d9539b424e4ed8b5c0872fc9e83 Mon Sep 17 00:00:00 2001 From: "Anand V. Avati" Date: Thu, 22 Oct 2009 06:24:52 -0700 Subject: fuse: prevent fuse_put_request on invalid pointer fuse_direct_io() has a loop where requests are allocated in each iteration. if allocation fails, the loop is broken out and follows into an unconditional fuse_put_request() on that invalid pointer. Signed-off-by: Anand V. Avati Signed-off-by: Miklos Szeredi Cc: stable@kernel.org diff --git a/fs/fuse/file.c b/fs/fuse/file.c index a3492f7..5887a63 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -1063,7 +1063,8 @@ ssize_t fuse_direct_io(struct file *file, const char __user *buf, break; } } - fuse_put_request(fc, req); + if (!IS_ERR(req)) + fuse_put_request(fc, req); if (res > 0) *ppos = pos; -- cgit v0.10.2 From 0bd87182d3ab18a32a8e9175d3f68754c58e3432 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 3 Nov 2009 11:40:44 +0100 Subject: fuse: fix kunmap in fuse_ioctl_copy_user Looks like another victim of the confusing kmap() vs kmap_atomic() API differences. Reported-by: Todor Gyumyushev Signed-off-by: Jens Axboe Signed-off-by: Miklos Szeredi Cc: Tejun Heo Cc: stable@kernel.org diff --git a/fs/fuse/file.c b/fs/fuse/file.c index 5887a63..c18913a 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -1600,7 +1600,7 @@ static int fuse_ioctl_copy_user(struct page **pages, struct iovec *iov, kaddr += copy; } - kunmap(map); + kunmap(page); } return 0; -- cgit v0.10.2 From 5219f346b0ea2a2a8821f1e966b190788c285b0b Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Wed, 4 Nov 2009 10:24:52 +0100 Subject: fuse: invalidate target of rename Invalidate the target's attributes, which may have changed (such as nlink, change time) so that they are refreshed on the next getattr(). Signed-off-by: Miklos Szeredi diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c index 992f6c9..8ada78a 100644 --- a/fs/fuse/dir.c +++ b/fs/fuse/dir.c @@ -712,8 +712,10 @@ static int fuse_rename(struct inode *olddir, struct dentry *oldent, fuse_invalidate_attr(newdir); /* newent will end up negative */ - if (newent->d_inode) + if (newent->d_inode) { + fuse_invalidate_attr(newent->d_inode); fuse_invalidate_entry_cache(newent); + } } else if (err == -EINTR) { /* If request was interrupted, DEITY only knows if the rename actually took place. If the invalidation -- cgit v0.10.2 From 798a8a15011e88cc63dbbb15728b42572c152093 Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Wed, 4 Nov 2009 10:11:07 +0000 Subject: ALSA: hda - Add OLPC XO-1.5 PCI ID The XO-1.5 laptop now has a unique subvendor/subproduct ID, which can be used to automatically select the correct CXT5066 configuration. Signed-off-by: Daniel Drake Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index 3fbbc8c..6479e65 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -2325,6 +2325,7 @@ static struct snd_pci_quirk cxt5066_cfg_tbl[] = { CXT5066_LAPTOP), SND_PCI_QUIRK(0x1028, 0x02f5, "Dell", CXT5066_DELL_LAPTOP), + SND_PCI_QUIRK(0x152d, 0x0833, "OLPC XO-1.5", CXT5066_OLPC_XO_1_5), {} }; -- cgit v0.10.2 From 1b3a02eb452354fa9b36a7f33dc4c8307bbc40aa Mon Sep 17 00:00:00 2001 From: Tony Thompson Date: Wed, 4 Nov 2009 12:16:38 +0000 Subject: ARMv7: Check whether the SMP/nAMP mode was already enabled If running in non-secure mode, enabling this register will fault. Signed-off-by: Tony Thompson Acked-by: Srinidhi Kasagar Signed-off-by: Catalin Marinas diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index eeeed01..3a28521 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -186,9 +186,10 @@ cpu_v7_name: */ __v7_setup: #ifdef CONFIG_SMP - mrc p15, 0, r0, c1, c0, 1 @ Enable SMP/nAMP mode and - orr r0, r0, #(1 << 6) | (1 << 0) @ TLB ops broadcasting - mcr p15, 0, r0, c1, c0, 1 + mrc p15, 0, r0, c1, c0, 1 + tst r0, #(1 << 6) @ SMP/nAMP mode enabled? + orreq r0, r0, #(1 << 6) | (1 << 0) @ Enable SMP/nAMP mode and + mcreq p15, 0, r0, c1, c0, 1 @ TLB ops broadcasting #endif adr r12, __v7_setup_stack @ the local stack stmia r12, {r0-r5, r7, r9, r11, lr} -- cgit v0.10.2 From 89240ba059ca468ae7a8346edf7f95082458c2fc Mon Sep 17 00:00:00 2001 From: Stefani Seibold Date: Tue, 3 Nov 2009 10:22:40 +0100 Subject: x86, fs: Fix x86 procfs stack information for threads on 64-bit This patch fixes two issues in the procfs stack information on x86-64 linux. The 32 bit loader compat_do_execve did not store stack start. (this was figured out by Alexey Dobriyan). The stack information on a x64_64 kernel always shows 0 kbyte stack usage, because of a missing implementation of the KSTK_ESP macro which always returned -1. The new implementation now returns the right value. Signed-off-by: Stefani Seibold Cc: Americo Wang Cc: Alexey Dobriyan Cc: Al Viro Cc: Andrew Morton LKML-Reference: <1257240160.4889.24.camel@wall-e> Signed-off-by: Ingo Molnar diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h index c3429e8..c978648 100644 --- a/arch/x86/include/asm/processor.h +++ b/arch/x86/include/asm/processor.h @@ -1000,7 +1000,7 @@ extern unsigned long thread_saved_pc(struct task_struct *tsk); #define thread_saved_pc(t) (*(unsigned long *)((t)->thread.sp - 8)) #define task_pt_regs(tsk) ((struct pt_regs *)(tsk)->thread.sp0 - 1) -#define KSTK_ESP(tsk) -1 /* sorry. doesn't work for syscall. */ +extern unsigned long KSTK_ESP(struct task_struct *task); #endif /* CONFIG_X86_64 */ extern void start_thread(struct pt_regs *regs, unsigned long new_ip, diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c index ad535b6..eb62cbc 100644 --- a/arch/x86/kernel/process_64.c +++ b/arch/x86/kernel/process_64.c @@ -664,3 +664,8 @@ long sys_arch_prctl(int code, unsigned long addr) return do_arch_prctl(current, code, addr); } +unsigned long KSTK_ESP(struct task_struct *task) +{ + return (test_tsk_thread_flag(task, TIF_IA32)) ? + (task_pt_regs(task)->sp) : ((task)->thread.usersp); +} diff --git a/fs/compat.c b/fs/compat.c index d576b55..6c19040 100644 --- a/fs/compat.c +++ b/fs/compat.c @@ -1532,6 +1532,8 @@ int compat_do_execve(char * filename, if (retval < 0) goto out; + current->stack_start = current->mm->start_stack; + /* execve succeeded */ current->fs->in_exec = 0; current->in_execve = 0; -- cgit v0.10.2 From a3c4c58085b23d8e878a58dcdd0f8fcf8fad1ccd Mon Sep 17 00:00:00 2001 From: Li Hong Date: Mon, 19 Oct 2009 16:33:29 +0800 Subject: amd64_edac: fix a wrong goto clause in amd64_edac.c In amd64_edac_init(void) in amd64_edac.c, cache_k8_northbridges() is called before pci_register_driver. If it fails, should exit with err directly. Signed-off-by: Li Hong Acked-by: Doug Thompson Signed-off-by: Borislav Petkov diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index d4560d9..3ee539a 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -3163,7 +3163,7 @@ static int __init amd64_edac_init(void) opstate_init(); if (cache_k8_northbridges() < 0) - goto err_exit; + return err; err = pci_register_driver(&amd64_pci_driver); if (err) @@ -3189,8 +3189,6 @@ static int __init amd64_edac_init(void) err_2nd_stage: debugf0("2nd stage failed\n"); - -err_exit: pci_unregister_driver(&amd64_pci_driver); return err; -- cgit v0.10.2 From 17adea01b9606e416ea5116a27d02d47fe7e6c8d Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 4 Nov 2009 14:04:06 +0100 Subject: amd64_edac: fix CECCs reporting Shift error type bits properly. Signed-off-by: Borislav Petkov diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index 3ee539a..a38831c 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -2254,7 +2254,7 @@ static inline void __amd64_decode_bus_error(struct mem_ctl_info *mci, { u32 ec = ERROR_CODE(info->nbsl); u32 xec = EXT_ERROR_CODE(info->nbsl); - int ecc_type = info->nbsh & (0x3 << 13); + int ecc_type = (info->nbsh >> 13) & 0x3; /* Bail early out if this was an 'observed' error */ if (PP(ec) == K8_NBSL_PP_OBS) -- cgit v0.10.2 From 3a19d56c71bd3a08412d609d219ac8eec0819166 Mon Sep 17 00:00:00 2001 From: Torgny Johansson Date: Wed, 4 Nov 2009 05:25:02 -0800 Subject: cdc_ether: additional Ericsson MBM PID's to the whitelist Signed-off-by: Torgny Johansson Signed-off-by: David S. Miller diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig index c47237c..32d9356 100644 --- a/drivers/net/usb/Kconfig +++ b/drivers/net/usb/Kconfig @@ -174,7 +174,7 @@ config USB_NET_CDCETHER * Ericsson Mobile Broadband Module (all variants) * Motorola (DM100 and SB4100) * Broadcom Cable Modem (reference design) - * Toshiba (PCX1100U and F3507g) + * Toshiba (PCX1100U and F3507g/F3607gw) * ... This driver creates an interface named "ethX", where X depends on diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c index 4a6aff5..21e1ba1 100644 --- a/drivers/net/usb/cdc_ether.c +++ b/drivers/net/usb/cdc_ether.c @@ -544,20 +544,60 @@ static const struct usb_device_id products [] = { USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), .driver_info = (unsigned long) &cdc_info, }, { - /* Ericsson F3307 */ + /* Ericsson F3607gw ver 2 */ + USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1905, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &cdc_info, +}, { + /* Ericsson F3607gw ver 3 */ USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1906, USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), .driver_info = (unsigned long) &cdc_info, }, { + /* Ericsson F3307 */ + USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x190a, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &cdc_info, +}, { + /* Ericsson F3307 ver 2 */ + USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1909, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &cdc_info, +}, { + /* Ericsson C3607w */ + USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1049, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &cdc_info, +}, { /* Toshiba F3507g */ USB_DEVICE_AND_INTERFACE_INFO(0x0930, 0x130b, USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), .driver_info = (unsigned long) &cdc_info, }, { + /* Toshiba F3607gw */ + USB_DEVICE_AND_INTERFACE_INFO(0x0930, 0x130c, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &cdc_info, +}, { + /* Toshiba F3607gw ver 2 */ + USB_DEVICE_AND_INTERFACE_INFO(0x0930, 0x1311, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &cdc_info, +}, { /* Dell F3507g */ USB_DEVICE_AND_INTERFACE_INFO(0x413c, 0x8147, USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), .driver_info = (unsigned long) &cdc_info, +}, { + /* Dell F3607gw */ + USB_DEVICE_AND_INTERFACE_INFO(0x413c, 0x8183, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &cdc_info, +}, { + /* Dell F3607gw ver 2 */ + USB_DEVICE_AND_INTERFACE_INFO(0x413c, 0x8184, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &cdc_info, }, { }, // END }; -- cgit v0.10.2 From c8ee5538b091b8aca9ca738c6989c5ad6f9e67c0 Mon Sep 17 00:00:00 2001 From: Tonyliu Date: Wed, 4 Nov 2009 05:45:02 -0800 Subject: DaVinci EMAC: correct param for ISR emac_irq is declared as: static irqreturn_t emac_irq(int irq, void *dev_id) { struct net_device *ndev = (struct net_device *)dev_id; struct emac_priv *priv = netdev_priv(ndev); ... Clearly emac_irq() needs "struct net_device *" as "void *dev_id", so correct this. Signed-off-by: Tonyliu Signed-off-by: David S. Miller diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c index f72c56d..3179521 100644 --- a/drivers/net/davinci_emac.c +++ b/drivers/net/davinci_emac.c @@ -2221,7 +2221,7 @@ void emac_poll_controller(struct net_device *ndev) struct emac_priv *priv = netdev_priv(ndev); emac_int_disable(priv); - emac_irq(ndev->irq, priv); + emac_irq(ndev->irq, ndev); emac_int_enable(priv); } #endif -- cgit v0.10.2 From a9e38c3e01ad242fe2a625354cf065c34b01e3aa Mon Sep 17 00:00:00 2001 From: Jan Kiszka Date: Fri, 23 Oct 2009 09:37:00 +0200 Subject: KVM: x86: Catch potential overrun in MCE setup We only allocate memory for 32 MCE banks (KVM_MAX_MCE_BANKS) but we allow user space to fill up to 255 on setup (mcg_cap & 0xff), corrupting kernel memory. Catch these overflows. Signed-off-by: Jan Kiszka Signed-off-by: Marcelo Tosatti diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 9b96953..8a93fa8 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -1692,7 +1692,7 @@ static int kvm_vcpu_ioctl_x86_setup_mce(struct kvm_vcpu *vcpu, unsigned bank_num = mcg_cap & 0xff, bank; r = -EINVAL; - if (!bank_num) + if (!bank_num || bank_num >= KVM_MAX_MCE_BANKS) goto out; if (mcg_cap & ~(KVM_MCE_CAP_SUPPORTED | 0xff | 0xff0000)) goto out; -- cgit v0.10.2 From abb3911965c1bd8eea305f64d4840a314259d96d Mon Sep 17 00:00:00 2001 From: Gleb Natapov Date: Sun, 25 Oct 2009 17:42:02 +0200 Subject: KVM: get_tss_base_addr() should return a gpa_t If TSS we are switching to resides in high memory task switch will fail since address will be truncated. Windows2k3 does this sometimes when running with more then 4G Cc: stable@kernel.org Signed-off-by: Gleb Natapov Signed-off-by: Avi Kivity diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 8a93fa8..ae07d26 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -4051,7 +4051,7 @@ static int save_guest_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector, return kvm_write_guest_virt(dtable.base + index*8, seg_desc, sizeof(*seg_desc), vcpu); } -static u32 get_tss_base_addr(struct kvm_vcpu *vcpu, +static gpa_t get_tss_base_addr(struct kvm_vcpu *vcpu, struct desc_struct *seg_desc) { u32 base_addr = get_desc_base(seg_desc); -- cgit v0.10.2 From 02303d2028aef19889415364fc5f7bb374887157 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 4 Nov 2009 08:25:57 -0800 Subject: isdn: hisax: Fix lock imbalance. Add omittted unlocks to 2 functions. Signed-off-by: Jiri Slaby Cc: Karsten Keil Signed-off-by: Andrew Morton Signed-off-by: David S. Miller diff --git a/drivers/isdn/hisax/amd7930_fn.c b/drivers/isdn/hisax/amd7930_fn.c index bf526a7..d6fdf1f 100644 --- a/drivers/isdn/hisax/amd7930_fn.c +++ b/drivers/isdn/hisax/amd7930_fn.c @@ -594,6 +594,7 @@ Amd7930_l1hw(struct PStack *st, int pr, void *arg) if (cs->debug & L1_DEB_WARN) debugl1(cs, "Amd7930: l1hw: l2l1 tx_skb exist this shouldn't happen"); skb_queue_tail(&cs->sq, skb); + spin_unlock_irqrestore(&cs->lock, flags); break; } if (cs->debug & DEB_DLOG_HEX) diff --git a/drivers/isdn/hisax/icc.c b/drivers/isdn/hisax/icc.c index 9aba646..c80cbb8 100644 --- a/drivers/isdn/hisax/icc.c +++ b/drivers/isdn/hisax/icc.c @@ -468,6 +468,7 @@ ICC_l1hw(struct PStack *st, int pr, void *arg) if (cs->debug & L1_DEB_WARN) debugl1(cs, " l2l1 tx_skb exist this shouldn't happen"); skb_queue_tail(&cs->sq, skb); + spin_unlock_irqrestore(&cs->lock, flags); break; } if (cs->debug & DEB_DLOG_HEX) -- cgit v0.10.2 From 08cb3f60b2f866c906a5a779444b30ba8f9a93c8 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 4 Nov 2009 08:27:09 -0800 Subject: misdn: Fix reversed 'if' in st_own_ctrl The current code probably returns -EINVAL a lot. Otherwise it would oops. Compile tested only. Found by smatch (http://repo.or.cz/w/smatch.git). Signed-off-by: Dan Carpenter Cc: Karsten Keil Signed-off-by: Andrew Morton Signed-off-by: David S. Miller diff --git a/drivers/isdn/mISDN/stack.c b/drivers/isdn/mISDN/stack.c index 3e1532a..0d05ec4 100644 --- a/drivers/isdn/mISDN/stack.c +++ b/drivers/isdn/mISDN/stack.c @@ -364,7 +364,7 @@ add_layer2(struct mISDNchannel *ch, struct mISDNstack *st) static int st_own_ctrl(struct mISDNchannel *ch, u_int cmd, void *arg) { - if (!ch->st || ch->st->layer1) + if (!ch->st || !ch->st->layer1) return -EINVAL; return ch->st->layer1->ctrl(ch->st->layer1, cmd, arg); } -- cgit v0.10.2 From 1ea70841f07666af69e481d4ffdd6edb56db3c92 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 4 Nov 2009 08:28:12 -0800 Subject: isdn: eicon: Use offsetof Use offsetof instead of explicit implementation. * fixes bug with omitted & like: len = (byte)(((T30_INFO *) 0)->station_id + 20) * avoids compiler warnings with wrong sizes (pointer-to-char cast): len = (byte)(&(((T30_INFO *) 0)->universal_6)); * cleans up the code Signed-off-by: Jiri Slaby Cc: Karsten Keil Acked-by: Armin Schindler Signed-off-by: Andrew Morton Signed-off-by: David S. Miller diff --git a/drivers/isdn/hardware/eicon/message.c b/drivers/isdn/hardware/eicon/message.c index 27d5dd6..ae89fb8 100644 --- a/drivers/isdn/hardware/eicon/message.c +++ b/drivers/isdn/hardware/eicon/message.c @@ -2692,7 +2692,7 @@ static byte connect_b3_req(dword Id, word Number, DIVA_CAPI_ADAPTER *a, if (!(fax_control_bits & T30_CONTROL_BIT_MORE_DOCUMENTS) || (fax_feature_bits & T30_FEATURE_BIT_MORE_DOCUMENTS)) { - len = (byte)(&(((T30_INFO *) 0)->universal_6)); + len = offsetof(T30_INFO, universal_6); fax_info_change = false; if (ncpi->length >= 4) { @@ -2754,7 +2754,7 @@ static byte connect_b3_req(dword Id, word Number, DIVA_CAPI_ADAPTER *a, for (i = 0; i < w; i++) ((T30_INFO *)(plci->fax_connect_info_buffer))->station_id[i] = fax_parms[4].info[1+i]; ((T30_INFO *)(plci->fax_connect_info_buffer))->head_line_len = 0; - len = (byte)(((T30_INFO *) 0)->station_id + 20); + len = offsetof(T30_INFO, station_id) + 20; w = fax_parms[5].length; if (w > 20) w = 20; @@ -2788,7 +2788,7 @@ static byte connect_b3_req(dword Id, word Number, DIVA_CAPI_ADAPTER *a, } else { - len = (byte)(&(((T30_INFO *) 0)->universal_6)); + len = offsetof(T30_INFO, universal_6); } fax_info_change = true; @@ -2892,7 +2892,7 @@ static byte connect_b3_res(dword Id, word Number, DIVA_CAPI_ADAPTER *a, && (plci->nsf_control_bits & T30_NSF_CONTROL_BIT_ENABLE_NSF) && (plci->nsf_control_bits & T30_NSF_CONTROL_BIT_NEGOTIATE_RESP)) { - len = ((byte)(((T30_INFO *) 0)->station_id + 20)); + len = offsetof(T30_INFO, station_id) + 20; if (plci->fax_connect_info_length < len) { ((T30_INFO *)(plci->fax_connect_info_buffer))->station_id_len = 0; @@ -3802,7 +3802,7 @@ static byte manufacturer_res(dword Id, word Number, DIVA_CAPI_ADAPTER *a, break; } ncpi = &m_parms[1]; - len = ((byte)(((T30_INFO *) 0)->station_id + 20)); + len = offsetof(T30_INFO, station_id) + 20; if (plci->fax_connect_info_length < len) { ((T30_INFO *)(plci->fax_connect_info_buffer))->station_id_len = 0; @@ -6844,7 +6844,7 @@ static void nl_ind(PLCI *plci) if ((plci->requested_options_conn | plci->requested_options | a->requested_options_table[plci->appl->Id-1]) & ((1L << PRIVATE_FAX_SUB_SEP_PWD) | (1L << PRIVATE_FAX_NONSTANDARD))) { - i = ((word)(((T30_INFO *) 0)->station_id + 20)) + ((T30_INFO *)plci->NL.RBuffer->P)->head_line_len; + i = offsetof(T30_INFO, station_id) + 20 + ((T30_INFO *)plci->NL.RBuffer->P)->head_line_len; while (i < plci->NL.RBuffer->length) plci->ncpi_buffer[++len] = plci->NL.RBuffer->P[i++]; } @@ -7236,7 +7236,7 @@ static void nl_ind(PLCI *plci) { plci->RData[1].P = plci->RData[0].P; plci->RData[1].PLength = plci->RData[0].PLength; - plci->RData[0].P = v120_header_buffer + (-((int) v120_header_buffer) & 3); + plci->RData[0].P = v120_header_buffer + (-((unsigned long)v120_header_buffer) & 3); if ((plci->NL.RBuffer->P[0] & V120_HEADER_EXTEND_BIT) || (plci->NL.RLength == 1)) plci->RData[0].PLength = 1; else @@ -8473,7 +8473,7 @@ static word add_b23(PLCI *plci, API_PARSE *bp) fax_control_bits |= T30_CONTROL_BIT_ACCEPT_SEL_POLLING; } len = nlc[0]; - pos = ((byte)(((T30_INFO *) 0)->station_id + 20)); + pos = offsetof(T30_INFO, station_id) + 20; if (pos < plci->fax_connect_info_length) { for (i = 1 + plci->fax_connect_info_buffer[pos]; i != 0; i--) @@ -8525,7 +8525,7 @@ static word add_b23(PLCI *plci, API_PARSE *bp) } PUT_WORD(&(((T30_INFO *)&nlc[1])->control_bits_low), fax_control_bits); - len = ((byte)(((T30_INFO *) 0)->station_id + 20)); + len = offsetof(T30_INFO, station_id) + 20; for (i = 0; i < len; i++) plci->fax_connect_info_buffer[i] = nlc[1+i]; ((T30_INFO *) plci->fax_connect_info_buffer)->head_line_len = 0; -- cgit v0.10.2 From b9db21f8b964e158f95bb581c887159b6cb98ffa Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 4 Nov 2009 08:30:08 -0800 Subject: isdn: eicon: Return on error When diva_strace_read_uint returns an error, return even from process_idi_event, because l2_state is uninitialized. Signed-off-by: Jiri Slaby Cc: Karsten Keil Acked-by: Armin Schindler Signed-off-by: Andrew Morton Signed-off-by: David S. Miller diff --git a/drivers/isdn/hardware/eicon/maintidi.c b/drivers/isdn/hardware/eicon/maintidi.c index 23960cb..41c26e7 100644 --- a/drivers/isdn/hardware/eicon/maintidi.c +++ b/drivers/isdn/hardware/eicon/maintidi.c @@ -959,8 +959,9 @@ static int process_idi_event (diva_strace_context_t* pLib, } if (!strncmp("State\\Layer2 No1", path, pVar->path_length)) { char* tmp = &pLib->lines[0].pInterface->Layer2[0]; - dword l2_state; - diva_strace_read_uint (pVar, &l2_state); + dword l2_state; + if (diva_strace_read_uint(pVar, &l2_state)) + return -1; switch (l2_state) { case 0: -- cgit v0.10.2 From a947c8f0313c0cf3691b8d8d2b9aaddf372afdcc Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 4 Nov 2009 08:31:19 -0800 Subject: isdn: hisax: Fix test in waitforxfw The negation makes it a bool before the comparison and hence it will never be 0x40. Signed-off-by: Roel Kluin Cc: Karsten Keil Signed-off-by: Andrew Morton Signed-off-by: David S. Miller diff --git a/drivers/isdn/hisax/diva.c b/drivers/isdn/hisax/diva.c index 018bd29..0b0c2e5 100644 --- a/drivers/isdn/hisax/diva.c +++ b/drivers/isdn/hisax/diva.c @@ -382,7 +382,7 @@ MemwaitforXFW(struct IsdnCardState *cs, int hscx) { int to = 50; - while ((!(MemReadHSCX(cs, hscx, HSCX_STAR) & 0x44) == 0x40) && to) { + while (((MemReadHSCX(cs, hscx, HSCX_STAR) & 0x44) != 0x40) && to) { udelay(1); to--; } diff --git a/drivers/isdn/hisax/hscx_irq.c b/drivers/isdn/hisax/hscx_irq.c index 7b1ad5e..2387d76 100644 --- a/drivers/isdn/hisax/hscx_irq.c +++ b/drivers/isdn/hisax/hscx_irq.c @@ -32,7 +32,7 @@ waitforXFW(struct IsdnCardState *cs, int hscx) { int to = 50; - while ((!(READHSCX(cs, hscx, HSCX_STAR) & 0x44) == 0x40) && to) { + while (((READHSCX(cs, hscx, HSCX_STAR) & 0x44) != 0x40) && to) { udelay(1); to--; } -- cgit v0.10.2 From 286e633ef0ff5bb63c07b4516665da8004966fec Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 4 Nov 2009 08:31:59 -0800 Subject: isdn: hfc_usb: Fix read buffer overflow Check whether index is within bounds before testing the element. Signed-off-by: Roel Kluin Cc: Karsten Keil Signed-off-by: Andrew Morton Signed-off-by: David S. Miller diff --git a/drivers/isdn/hisax/hfc_usb.c b/drivers/isdn/hisax/hfc_usb.c index 9de5420..a420b64 100644 --- a/drivers/isdn/hisax/hfc_usb.c +++ b/drivers/isdn/hisax/hfc_usb.c @@ -817,8 +817,8 @@ collect_rx_frame(usb_fifo * fifo, __u8 * data, int len, int finish) } /* we have a complete hdlc packet */ if (finish) { - if ((!fifo->skbuff->data[fifo->skbuff->len - 1]) - && (fifo->skbuff->len > 3)) { + if (fifo->skbuff->len > 3 && + !fifo->skbuff->data[fifo->skbuff->len - 1]) { if (fifon == HFCUSB_D_RX) { DBG(HFCUSB_DBG_DCHANNEL, -- cgit v0.10.2 From dffc14365bb07812567ee7f3f8699277ef19aaa8 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 4 Nov 2009 09:38:58 -0800 Subject: MAINTAINERS: Add git net-next-2.6 Add a reference to the the git tree where most of the forward going network development occurs. Signed-off-by: Joe Perches Signed-off-by: David S. Miller diff --git a/MAINTAINERS b/MAINTAINERS index cdbbaf5..c856aee 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3632,6 +3632,7 @@ L: netdev@vger.kernel.org W: http://www.linuxfoundation.org/en/Net W: http://patchwork.ozlabs.org/project/netdev/list/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6.git S: Maintained F: net/ F: include/net/ -- cgit v0.10.2 From 4c3da2209b1261af9a948b7509a38904c8eee554 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Wed, 4 Nov 2009 02:50:06 -0800 Subject: sysfs: Don't leak secdata when a sysfs_dirent is freed. While refreshing my sysfs patches I noticed a leak in the secdata implementation. We don't free the secdata when we free the sysfs dirent. This is a bug in 2.6.32-rc5 that we really should close. Signed-off-by: Eric W. Biederman Acked-by: Serge Hallyn Signed-off-by: James Morris diff --git a/fs/sysfs/dir.c b/fs/sysfs/dir.c index 5fad489..e020183 100644 --- a/fs/sysfs/dir.c +++ b/fs/sysfs/dir.c @@ -21,6 +21,7 @@ #include #include #include +#include #include "sysfs.h" DEFINE_MUTEX(sysfs_mutex); @@ -285,6 +286,9 @@ void release_sysfs_dirent(struct sysfs_dirent * sd) sysfs_put(sd->s_symlink.target_sd); if (sysfs_type(sd) & SYSFS_COPY_NAME) kfree(sd->s_name); + if (sd->s_iattr && sd->s_iattr->ia_secdata) + security_release_secctx(sd->s_iattr->ia_secdata, + sd->s_iattr->ia_secdata_len); kfree(sd->s_iattr); sysfs_free_ino(sd->s_ino); kmem_cache_free(sysfs_dir_cachep, sd); -- cgit v0.10.2 From 37b12dd2b07b4d7dc222a5f7f88b25cec532b2aa Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Wed, 4 Nov 2009 00:00:25 -0600 Subject: rtl8187: Fix kernel oops when device is removed when LEDS enabled As reported by Rick Farina (sidhayn@gmail.com), removing the RTL8187 USB stick, or unloading the driver rtl8187 using rmmod will cause a kernel oops. There are at least two forms of the failure, (1) BUG: Scheduling while atomic, and (2) a fatal kernel page fault. This problem is reported in Bugzilla #14539. This problem does not occur for kernel 2.6.31, but does for 2.6.32-rc2, thus it is technically a regression; however, bisection did not locate any faulty patch. The fix was found by comparing the faulty code in rtl8187 with p54usb. My interpretation is that the handling of work queues in mac80211 changed enough to the LEDs to be unregistered before tasks on the work queues are cancelled. Previously, these actions could be done in either order. (Herton Ronaldo Krzesinski reports that the code is the same in 2.6.31, so this may be a candidate for 2.6.31.x. -- JWL) Signed-off-by: Larry Finger Reported-by: Rick Farina Tested-by: Rick Farina Cc: stable@kernel.org Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtl818x/rtl8187_leds.c b/drivers/net/wireless/rtl818x/rtl8187_leds.c index a1c670f..cf8a4a4 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_leds.c +++ b/drivers/net/wireless/rtl818x/rtl8187_leds.c @@ -210,10 +210,10 @@ void rtl8187_leds_exit(struct ieee80211_hw *dev) /* turn the LED off before exiting */ ieee80211_queue_delayed_work(dev, &priv->led_off, 0); - cancel_delayed_work_sync(&priv->led_off); - cancel_delayed_work_sync(&priv->led_on); rtl8187_unregister_led(&priv->led_rx); rtl8187_unregister_led(&priv->led_tx); + cancel_delayed_work_sync(&priv->led_off); + cancel_delayed_work_sync(&priv->led_on); } #endif /* def CONFIG_RTL8187_LED */ -- cgit v0.10.2 From f1167fb318f0ff0bcb9cbb57bb6d16ad450f0cfb Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 4 Nov 2009 13:39:52 +0000 Subject: powerpc/mm: Remove debug context clamping from nohash code I inadvertently left that debug code enabled, causing the number of contexts to be clamped to 31 which is going to slow things down on 4xx and just plain breaks 8xx Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c index c2f93dc..be4f34c 100644 --- a/arch/powerpc/mm/mmu_context_nohash.c +++ b/arch/powerpc/mm/mmu_context_nohash.c @@ -25,8 +25,8 @@ * also clear mm->cpu_vm_mask bits when processes are migrated */ -#define DEBUG_MAP_CONSISTENCY -#define DEBUG_CLAMP_LAST_CONTEXT 31 +//#define DEBUG_MAP_CONSISTENCY +//#define DEBUG_CLAMP_LAST_CONTEXT 31 //#define DEBUG_HARDER /* We don't use DEBUG because it tends to be compiled in always nowadays -- cgit v0.10.2 From 978d7eb31d44de34a7f71e04ed4158f3f854688d Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sun, 1 Nov 2009 19:11:03 +0000 Subject: powerpc: Avoid giving out RTC dates below EPOCH Doing so causes xtime to be negative which crashes the timekeeping code in funny ways when doing suspend/resume Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 92dc844..a136a11c490 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -777,7 +777,7 @@ int update_persistent_clock(struct timespec now) return ppc_md.set_rtc_time(&tm); } -void read_persistent_clock(struct timespec *ts) +static void __read_persistent_clock(struct timespec *ts) { struct rtc_time tm; static int first = 1; @@ -800,10 +800,23 @@ void read_persistent_clock(struct timespec *ts) return; } ppc_md.get_rtc_time(&tm); + ts->tv_sec = mktime(tm.tm_year+1900, tm.tm_mon+1, tm.tm_mday, tm.tm_hour, tm.tm_min, tm.tm_sec); } +void read_persistent_clock(struct timespec *ts) +{ + __read_persistent_clock(ts); + + /* Sanitize it in case real time clock is set below EPOCH */ + if (ts->tv_sec < 0) { + ts->tv_sec = 0; + ts->tv_nsec = 0; + } + +} + /* clocksource code */ static cycle_t rtc_read(struct clocksource *cs) { -- cgit v0.10.2 From 8435b027b87a78145992c37b0b8ed0f1b7761bf0 Mon Sep 17 00:00:00 2001 From: Andre Detsch Date: Wed, 4 Nov 2009 13:03:19 -0200 Subject: powerpc/pci: Fix regression in powerpc MSI-X Patch f598282f5145036312d90875d0ed5c14b49fd8a7 exposed a problem in powerpc MSI-X functionality, making network interfaces such as ixgbe and cxgb3 stop to work when MSI-X is enabled. RX interrupts were not being generated. The problem was caused because MSI irq was not being effectively unmasked after device initialization. Signed-off-by: Andre Detsch Signed-off-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/platforms/pseries/msi.c b/arch/powerpc/platforms/pseries/msi.c index bf2e1ac..1164c34 100644 --- a/arch/powerpc/platforms/pseries/msi.c +++ b/arch/powerpc/platforms/pseries/msi.c @@ -432,8 +432,6 @@ static int rtas_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type) /* Read config space back so we can restore after reset */ read_msi_msg(virq, &msg); entry->msg = msg; - - unmask_msi_irq(virq); } return 0; diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c index 419f8a6..b9bf0ee 100644 --- a/arch/powerpc/platforms/pseries/xics.c +++ b/arch/powerpc/platforms/pseries/xics.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include @@ -219,6 +220,14 @@ static void xics_unmask_irq(unsigned int virq) static unsigned int xics_startup(unsigned int virq) { + /* + * The generic MSI code returns with the interrupt disabled on the + * card, using the MSI mask bits. Firmware doesn't appear to unmask + * at that level, so we do it here by hand. + */ + if (irq_to_desc(virq)->msi_desc) + unmask_msi_irq(virq); + /* unmask it */ xics_unmask_irq(virq); return 0; -- cgit v0.10.2 From 38634e6769920929385f1ffc8820dc3e893cc630 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 5 Nov 2009 17:10:34 +1100 Subject: powerpc/kvm: Remove problematic BUILD_BUG_ON statement Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/kvm/timing.h b/arch/powerpc/kvm/timing.h index bb13b1f..806ef67 100644 --- a/arch/powerpc/kvm/timing.h +++ b/arch/powerpc/kvm/timing.h @@ -48,7 +48,11 @@ static inline void kvmppc_set_exit_type(struct kvm_vcpu *vcpu, int type) {} static inline void kvmppc_account_exit_stat(struct kvm_vcpu *vcpu, int type) { /* type has to be known at build time for optimization */ + + /* The BUILD_BUG_ON below breaks in funny ways, commented out + * for now ... -BenH BUILD_BUG_ON(__builtin_constant_p(type)); + */ switch (type) { case EXT_INTR_EXITS: vcpu->stat.ext_intr_exits++; -- cgit v0.10.2 From 7e6c3989af5baee999ef9a4424e85938cba8d34a Mon Sep 17 00:00:00 2001 From: Daniel T Chen Date: Wed, 4 Nov 2009 21:03:46 -0500 Subject: ALSA: intel8x0: Mute External Amplifier by default for another Sony model BugLink: https://bugs.launchpad.net/bugs/474972 This Sony model needs External Amplifier muted for audible playback, so make sure we set the inv_eapd quirk. Signed-off-by: Daniel T Chen Signed-off-by: Takashi Iwai diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c index 754867e..aac20fb 100644 --- a/sound/pci/intel8x0.c +++ b/sound/pci/intel8x0.c @@ -1950,6 +1950,12 @@ static struct ac97_quirk ac97_quirks[] __devinitdata = { }, { .subvendor = 0x104d, + .subdevice = 0x8144, + .name = "Sony", + .type = AC97_TUNE_INV_EAPD + }, + { + .subvendor = 0x104d, .subdevice = 0x8197, .name = "Sony S1XP", .type = AC97_TUNE_INV_EAPD -- cgit v0.10.2 From f702cf463e1308fbb0c1faa9f3d8e3fa9cb5630f Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 4 Nov 2009 16:04:52 -0800 Subject: sound: Use KERN_WARNING instead of KERN_WARN, which does not exist Reported-by: Andrew Lyon Signed-off-by: Randy Dunlap Signed-off-by: Takashi Iwai diff --git a/sound/oss/sb_common.c b/sound/oss/sb_common.c index 77d0e5e..ce4db49 100644 --- a/sound/oss/sb_common.c +++ b/sound/oss/sb_common.c @@ -157,7 +157,7 @@ static void sb_intr (sb_devc *devc) break; default: - /* printk(KERN_WARN "Sound Blaster: Unexpected interrupt\n"); */ + /* printk(KERN_WARNING "Sound Blaster: Unexpected interrupt\n"); */ ; } } @@ -177,7 +177,7 @@ static void sb_intr (sb_devc *devc) break; default: - /* printk(KERN_WARN "Sound Blaster: Unexpected interrupt\n"); */ + /* printk(KERN_WARNING "Sound Blaster: Unexpected interrupt\n"); */ ; } } diff --git a/sound/oss/sb_ess.c b/sound/oss/sb_ess.c index 180e95c..51a3d38 100644 --- a/sound/oss/sb_ess.c +++ b/sound/oss/sb_ess.c @@ -782,7 +782,7 @@ printk(KERN_INFO "FKS: ess_handle_channel %s irq_mode=%d\n", channel, irq_mode); break; default:; - /* printk(KERN_WARN "ESS: Unexpected interrupt\n"); */ + /* printk(KERN_WARNING "ESS: Unexpected interrupt\n"); */ } } -- cgit v0.10.2 From 22402529df88ec39a59b08a46bced73dd5722b64 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Thu, 5 Nov 2009 01:32:44 -0800 Subject: virtio_net: rename driver struct to please modpost MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 3d1285b (move virtnet_remove to .devexit.text) introduced the first reference to __devexit in struct virtio_driver virtio_net which upset modpost ("Section mismatch in reference from the variable virtio_net to the function .devexit.text:virtnet_remove()"). Fix this by renaming virtio_net to virtio_net_driver. Signed-off-by: Uwe Kleine-König Reported-by: Michael S. Tsirkin Blame-taken-by: Rusty Russell Signed-off-by: David S. Miller diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index d9ebac8..bb8b52d 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -999,7 +999,7 @@ static unsigned int features[] = { VIRTIO_NET_F_CTRL_RX, VIRTIO_NET_F_CTRL_VLAN, }; -static struct virtio_driver virtio_net = { +static struct virtio_driver virtio_net_driver = { .feature_table = features, .feature_table_size = ARRAY_SIZE(features), .driver.name = KBUILD_MODNAME, @@ -1012,12 +1012,12 @@ static struct virtio_driver virtio_net = { static int __init init(void) { - return register_virtio_driver(&virtio_net); + return register_virtio_driver(&virtio_net_driver); } static void __exit fini(void) { - unregister_virtio_driver(&virtio_net); + unregister_virtio_driver(&virtio_net_driver); } module_init(init); module_exit(fini); -- cgit v0.10.2 From 9b229fa0951fb47cbc178be4bd8e9ef185b38802 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Wed, 4 Nov 2009 12:16:38 +0000 Subject: Check whether the SCU was already initialised If Linux is running in non-secure mode, this register may have been already initialised and writing to the control register not allowed. Signed-off-by: Catalin Marinas diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c index d3831f6..9ab4149 100644 --- a/arch/arm/kernel/smp_scu.c +++ b/arch/arm/kernel/smp_scu.c @@ -37,6 +37,10 @@ void __init scu_enable(void __iomem *scu_base) u32 scu_ctrl; scu_ctrl = __raw_readl(scu_base + SCU_CTRL); + /* already enabled? */ + if (scu_ctrl & 1) + return; + scu_ctrl |= 1; __raw_writel(scu_ctrl, scu_base + SCU_CTRL); -- cgit v0.10.2 From 5b39d1548dc2751f8de89e6f429b6560a137eebb Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Wed, 4 Nov 2009 12:19:04 +0000 Subject: RealView: Add default memory configuration This patch adds a realview_fixup() function called during booting to set up the memory banks. This way there is no need to pass a "mem=" argument on the kernel command line. Signed-off-by: Catalin Marinas diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index a2083b6..c21b0fd 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -788,3 +788,24 @@ void __init realview_timer_init(unsigned int timer_irq) realview_clocksource_init(); realview_clockevents_init(timer_irq); } + +/* + * Setup the memory banks. + */ +void realview_fixup(struct machine_desc *mdesc, struct tag *tags, char **from, + struct meminfo *meminfo) +{ + /* + * Most RealView platforms have 512MB contiguous RAM at 0x70000000. + * Half of this is mirrored at 0. + */ +#ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET + meminfo->bank[0].start = 0x70000000; + meminfo->bank[0].size = SZ_512M; + meminfo->nr_banks = 1; +#else + meminfo->bank[0].start = 0; + meminfo->bank[0].size = SZ_256M; + meminfo->nr_banks = 1; +#endif +} diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h index 699671f..781bca6 100644 --- a/arch/arm/mach-realview/core.h +++ b/arch/arm/mach-realview/core.h @@ -25,6 +25,7 @@ #include #include +#include #include #define AMBA_DEVICE(name,busid,base,plat) \ @@ -44,6 +45,8 @@ static struct amba_device name##_device = { \ /* .dma = base##_DMA,*/ \ } +struct machine_desc; + extern struct platform_device realview_flash_device; extern struct platform_device realview_cf_device; extern struct platform_device realview_i2c_device; @@ -61,5 +64,8 @@ extern void realview_timer_init(unsigned int timer_irq); extern int realview_flash_register(struct resource *res, u32 num); extern int realview_eth_register(const char *name, struct resource *res); extern int realview_usb_register(struct resource *res); +extern void realview_fixup(struct machine_desc *mdesc, struct tag *tags, + char **from, struct meminfo *meminfo); extern void (*realview_reset)(char); + #endif diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index 1d65e64..917f8ca 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -415,6 +415,7 @@ MACHINE_START(REALVIEW_EB, "ARM-RealView EB") .phys_io = REALVIEW_EB_UART0_BASE, .io_pg_offst = (IO_ADDRESS(REALVIEW_EB_UART0_BASE) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x00000100, + .fixup = realview_fixup, .map_io = realview_eb_map_io, .init_irq = gic_init_irq, .timer = &realview_eb_timer, diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index a6ba147..7fb726d 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -300,6 +300,18 @@ static void realview_pb1176_reset(char mode) __raw_writel(REALVIEW_PB1176_SYS_LOCKVAL_RSTCTL, hdr_ctrl); } +static void realview_pb1176_fixup(struct machine_desc *mdesc, + struct tag *tags, char **from, + struct meminfo *meminfo) +{ + /* + * RealView PB1176 only has 128MB of RAM mapped at 0. + */ + meminfo->bank[0].start = 0; + meminfo->bank[0].size = SZ_128M; + meminfo->nr_banks = 1; +} + static void __init realview_pb1176_init(void) { int i; @@ -331,6 +343,7 @@ MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176") .phys_io = REALVIEW_PB1176_UART0_BASE, .io_pg_offst = (IO_ADDRESS(REALVIEW_PB1176_UART0_BASE) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x00000100, + .fixup = realview_pb1176_fixup, .map_io = realview_pb1176_map_io, .init_irq = gic_init_irq, .timer = &realview_pb1176_timer, diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index 070d284..9bbbfc0 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -347,6 +347,7 @@ MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore") .phys_io = REALVIEW_PB11MP_UART0_BASE, .io_pg_offst = (IO_ADDRESS(REALVIEW_PB11MP_UART0_BASE) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x00000100, + .fixup = realview_fixup, .map_io = realview_pb11mp_map_io, .init_irq = gic_init_irq, .timer = &realview_pb11mp_timer, diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c index 941beb2..fe861e9 100644 --- a/arch/arm/mach-realview/realview_pba8.c +++ b/arch/arm/mach-realview/realview_pba8.c @@ -298,6 +298,7 @@ MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8") .phys_io = REALVIEW_PBA8_UART0_BASE, .io_pg_offst = (IO_ADDRESS(REALVIEW_PBA8_UART0_BASE) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x00000100, + .fixup = realview_fixup, .map_io = realview_pba8_map_io, .init_irq = gic_init_irq, .timer = &realview_pba8_timer, diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index 7e4bc6c..5d09d8b 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -345,6 +345,7 @@ MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX") .phys_io = REALVIEW_PBX_UART0_BASE, .io_pg_offst = (IO_ADDRESS(REALVIEW_PBX_UART0_BASE) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x00000100, + .fixup = realview_fixup, .map_io = realview_pbx_map_io, .init_irq = gic_init_irq, .timer = &realview_pbx_timer, -- cgit v0.10.2 From 157aed7473d300587e89cc87e13f194e3fa6fa36 Mon Sep 17 00:00:00 2001 From: Colin Tuckley Date: Wed, 4 Nov 2009 12:19:05 +0000 Subject: RealView: Remove duplicated #define REALVIEW_SYS_FLAGS* statements The platsmp.c file defines the REALVIEW_SYS_FLAGS* macros which are already present in platform.h. Just use the latter. Signed-off-by: Colin Tuckley Signed-off-by: Catalin Marinas diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index a88458b..0092658 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -146,11 +146,8 @@ static void __init poke_milo(void) * register. The BootMonitor waits for this register to become * non-zero. */ -#define REALVIEW_SYS_FLAGSS_OFFSET 0x30 -#define REALVIEW_SYS_FLAGSC_OFFSET 0x34 __raw_writel(BSYM(virt_to_phys(realview_secondary_startup)), - __io_address(REALVIEW_SYS_BASE) + - REALVIEW_SYS_FLAGSS_OFFSET); + __io_address(REALVIEW_SYS_FLAGSSET)); mb(); } -- cgit v0.10.2 From c97c5aa83c41a532bc67da356d77da929bc41b9c Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Wed, 4 Nov 2009 12:19:05 +0000 Subject: RealView: Add sparsemem support for the RealView PBX platform The RealView PBX board has two 512MB blocks of memory - one at 0x70000000 (with 256MB mirror at 0) and another at 0x20000000. Only the block at 0x70000000 (or the mirror at 0) may be used for DMA (e.g. framebuffer). This patch adds the sparsemem definitions to allow the use of all the memory split as follows: 256MB @ 0x00000000 (ZONE_DMA) 512MB @ 0x20000000 (ZONE_NORMAL) 256MB @ 0x80000000 (ZONE_NORMAL) Signed-off-by: Catalin Marinas diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig index dfc9b0b..c48e1f2 100644 --- a/arch/arm/mach-realview/Kconfig +++ b/arch/arm/mach-realview/Kconfig @@ -70,6 +70,8 @@ config MACH_REALVIEW_PBX bool "Support RealView/PBX platform" select ARM_GIC select HAVE_PATA_PLATFORM + select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !HIGH_PHYS_OFFSET + select ZONE_DMA if SPARSEMEM help Include support for the ARM(R) RealView PBX platform. @@ -82,6 +84,7 @@ config REALVIEW_HIGH_PHYS_OFFSET 0x70000000, 256MB of which being mirrored at 0x00000000. If the board supports 512MB of RAM, this option allows the memory to be accessed contiguously at the high physical - offset. + offset. On the PBX board, disabling this option allows 1GB of + RAM to be used with SPARSEMEM. endmenu diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index c21b0fd..9f29343 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -59,6 +59,25 @@ /* used by entry-macro.S and platsmp.c */ void __iomem *gic_cpu_base_addr; +#ifdef CONFIG_ZONE_DMA +/* + * Adjust the zones if there are restrictions for DMA access. + */ +void __init realview_adjust_zones(int node, unsigned long *size, + unsigned long *hole) +{ + unsigned long dma_size = SZ_256M >> PAGE_SHIFT; + + if (!machine_is_realview_pbx() || node || (size[0] <= dma_size)) + return; + + size[ZONE_NORMAL] = size[0] - dma_size; + size[ZONE_DMA] = dma_size; + hole[ZONE_NORMAL] = hole[0]; + hole[ZONE_DMA] = 0; +} +#endif + /* * This is the RealView sched_clock implementation. This has * a resolution of 41.7ns, and a maximum value of about 179s. @@ -543,7 +562,7 @@ static int realview_clcd_setup(struct clcd_fb *fb) fb->panel = realview_clcd_panel(); fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize, - &dma, GFP_KERNEL); + &dma, GFP_KERNEL | GFP_DMA); if (!fb->fb.screen_base) { printk(KERN_ERR "CLCD: unable to map framebuffer\n"); return -ENOMEM; diff --git a/arch/arm/mach-realview/include/mach/memory.h b/arch/arm/mach-realview/include/mach/memory.h index 293c300..2417bbc 100644 --- a/arch/arm/mach-realview/include/mach/memory.h +++ b/arch/arm/mach-realview/include/mach/memory.h @@ -29,4 +29,53 @@ #define PHYS_OFFSET UL(0x00000000) #endif +#if !defined(__ASSEMBLY__) && defined(CONFIG_ZONE_DMA) +extern void realview_adjust_zones(int node, unsigned long *size, + unsigned long *hole); +#define arch_adjust_zones(node, size, hole) \ + realview_adjust_zones(node, size, hole) + +#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_256M - 1) +#define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_256M) +#endif + +#ifdef CONFIG_SPARSEMEM + +/* + * Sparsemem definitions for RealView PBX. + * + * The RealView PBX board has another block of 512MB of RAM at 0x20000000, + * however only the block at 0x70000000 (or the 256MB mirror at 0x00000000) + * may be used for DMA. + * + * The macros below define a section size of 256MB and a non-linear virtual to + * physical mapping: + * + * 256MB @ 0x00000000 -> PAGE_OFFSET + * 512MB @ 0x20000000 -> PAGE_OFFSET + 0x10000000 + * 256MB @ 0x80000000 -> PAGE_OFFSET + 0x30000000 + */ +#ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET +#error "SPARSEMEM not available with REALVIEW_HIGH_PHYS_OFFSET" +#endif + +#define MAX_PHYSMEM_BITS 32 +#define SECTION_SIZE_BITS 28 + +/* bank page offsets */ +#define PAGE_OFFSET1 (PAGE_OFFSET + 0x10000000) +#define PAGE_OFFSET2 (PAGE_OFFSET + 0x30000000) + +#define __phys_to_virt(phys) \ + ((phys) >= 0x80000000 ? (phys) - 0x80000000 + PAGE_OFFSET2 : \ + (phys) >= 0x20000000 ? (phys) - 0x20000000 + PAGE_OFFSET1 : \ + (phys) + PAGE_OFFSET) + +#define __virt_to_phys(virt) \ + ((virt) >= PAGE_OFFSET2 ? (virt) - PAGE_OFFSET2 + 0x80000000 : \ + (virt) >= PAGE_OFFSET1 ? (virt) - PAGE_OFFSET1 + 0x20000000 : \ + (virt) - PAGE_OFFSET) + +#endif /* CONFIG_SPARSEMEM */ + #endif diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index 5d09d8b..ec39488 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -304,6 +304,26 @@ static struct sys_timer realview_pbx_timer = { .init = realview_pbx_timer_init, }; +static void realview_pbx_fixup(struct machine_desc *mdesc, struct tag *tags, + char **from, struct meminfo *meminfo) +{ +#ifdef CONFIG_SPARSEMEM + /* + * Memory configuration with SPARSEMEM enabled on RealView PBX (see + * asm/mach/memory.h for more information). + */ + meminfo->bank[0].start = 0; + meminfo->bank[0].size = SZ_256M; + meminfo->bank[1].start = 0x20000000; + meminfo->bank[1].size = SZ_512M; + meminfo->bank[2].start = 0x80000000; + meminfo->bank[2].size = SZ_256M; + meminfo->nr_banks = 3; +#else + realview_fixup(mdesc, tags, from, meminfo); +#endif +} + static void __init realview_pbx_init(void) { int i; @@ -345,7 +365,7 @@ MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX") .phys_io = REALVIEW_PBX_UART0_BASE, .io_pg_offst = (IO_ADDRESS(REALVIEW_PBX_UART0_BASE) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x00000100, - .fixup = realview_fixup, + .fixup = realview_pbx_fixup, .map_io = realview_pbx_map_io, .init_irq = gic_init_irq, .timer = &realview_pbx_timer, -- cgit v0.10.2 From cb5485a0b99b232c5c7c4c21e2346f8ab7ef555d Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Mon, 21 Sep 2009 10:30:08 -0400 Subject: powerpc/85xx: sbc8548 - fixup of PCI-e related DTS fields The PCI-e addressing was originally patterned of the MPC8548CDS which has PCI1, PCI2, and PCI-e. Since this board only has PCI1 and PCI-e, it makes more sense to be similar to the MPC8568MDS board. This does that by cutting the PCI/PCI-e I/O sizes from 16MB to 8MB and pulling the PCI-e I/O range back to 0xe280_0000 (the hole where PCI2 I/O would have been). This also fixes a typo where an extra zero made an 8MB range a 128MB range, removes the hole left by PCI2 from the aliases, and sets the clocks to match the oscillators that are actually on the board. With accompanying u-boot updates, PCI-e has been validated with both a sky2 card (1148:9e00) and an e1000 card (8086:108b). Signed-off-by: Paul Gortmaker Signed-off-by: Kumar Gala diff --git a/arch/powerpc/boot/dts/sbc8548.dts b/arch/powerpc/boot/dts/sbc8548.dts index 9eefe00..94a3322 100644 --- a/arch/powerpc/boot/dts/sbc8548.dts +++ b/arch/powerpc/boot/dts/sbc8548.dts @@ -26,8 +26,7 @@ serial0 = &serial0; serial1 = &serial1; pci0 = &pci0; - /* pci1 doesn't have a corresponding physical connector */ - pci2 = &pci2; + pci1 = &pci1; }; cpus { @@ -381,7 +380,7 @@ bus-range = <0 0>; ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x10000000 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00800000>; - clock-frequency = <66666666>; + clock-frequency = <66000000>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; @@ -390,7 +389,7 @@ device_type = "pci"; }; - pci2: pcie@e000a000 { + pci1: pcie@e000a000 { interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < @@ -403,9 +402,9 @@ interrupt-parent = <&mpic>; interrupts = <0x1a 0x2>; bus-range = <0x0 0xff>; - ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 - 0x01000000 0x0 0x00000000 0xe3000000 0x0 0x08000000>; - clock-frequency = <33333333>; + ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe2800000 0x0 0x08000000>; + clock-frequency = <33000000>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; @@ -419,11 +418,11 @@ device_type = "pci"; ranges = <0x02000000 0x0 0xa0000000 0x02000000 0x0 0xa0000000 - 0x0 0x20000000 + 0x0 0x10000000 0x01000000 0x0 0x00000000 0x01000000 0x0 0x00000000 - 0x0 0x08000000>; + 0x0 0x00800000>; }; }; }; -- cgit v0.10.2 From 58459a4e19e107d793a58a46780def2cea12a391 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 9 Sep 2009 16:49:57 +0200 Subject: powerpc/82xx: kmalloc failure ignored in ep8248e_mdio_probe() Prevent NULL dereference if kmalloc() fails. Also clean up if of_mdiobus_register() returns an error. Signed-off-by: Roel Kluin Acked-by: Scott Wood Signed-off-by: Kumar Gala diff --git a/arch/powerpc/platforms/82xx/ep8248e.c b/arch/powerpc/platforms/82xx/ep8248e.c index 51fcae4..f9aee18 100644 --- a/arch/powerpc/platforms/82xx/ep8248e.c +++ b/arch/powerpc/platforms/82xx/ep8248e.c @@ -132,12 +132,25 @@ static int __devinit ep8248e_mdio_probe(struct of_device *ofdev, return -ENOMEM; bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL); + if (bus->irq == NULL) { + ret = -ENOMEM; + goto err_free_bus; + } bus->name = "ep8248e-mdio-bitbang"; bus->parent = &ofdev->dev; snprintf(bus->id, MII_BUS_ID_SIZE, "%x", res.start); - return of_mdiobus_register(bus, ofdev->node); + ret = of_mdiobus_register(bus, ofdev->node); + if (ret) + goto err_free_irq; + + return 0; +err_free_irq: + kfree(bus->irq); +err_free_bus: + free_mdio_bitbang(bus); + return ret; } static int ep8248e_mdio_remove(struct of_device *ofdev) -- cgit v0.10.2 From a070e66ae89978ffc16378b2d37bedf3674a9112 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Fri, 16 Oct 2009 20:50:13 +0400 Subject: powerpc/85xx: Fix USB GPIOs for MPC8569E-MDS boards This patch fixes USB GPIOs numbers for MPC8569E-MDS boards, plus according to the latest HW Getting Started Guide (rev 3.3, pilot boards), USB "POWER" GPIO polarity has changed, it is no longer inverted. This patch makes USB Host somewhat work on pilot boards, though there are still some problems with determining devices speed and long bulk transfers. Reported-by: Liu Yu Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts index 06332d6..1e3ec8f 100644 --- a/arch/powerpc/boot/dts/mpc8569mds.dts +++ b/arch/powerpc/boot/dts/mpc8569mds.dts @@ -487,8 +487,8 @@ &qe_pio_f 5 0 /* USBTN */ &qe_pio_f 6 0 /* USBRP */ &qe_pio_f 8 0 /* USBRN */ - &bcsr17 6 0 /* SPEED */ - &bcsr17 5 1>; /* POWER */ + &bcsr17 1 0 /* SPEED */ + &bcsr17 2 0>; /* POWER */ }; enet0: ucc@2000 { -- cgit v0.10.2 From 850f785a1f8c8448db4d70983595b2b088cf60b7 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Fri, 16 Oct 2009 20:47:22 +0400 Subject: powerpc/83xx: Fix u-boot partion size for MPC8377E-WLAN boards u-boot partition size should be 0x80000 (512 KB), not 0x8000 (32 KB). Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala diff --git a/arch/powerpc/boot/dts/mpc8377_wlan.dts b/arch/powerpc/boot/dts/mpc8377_wlan.dts index 9a60369..9ea7830 100644 --- a/arch/powerpc/boot/dts/mpc8377_wlan.dts +++ b/arch/powerpc/boot/dts/mpc8377_wlan.dts @@ -67,7 +67,7 @@ device-width = <1>; partition@0 { - reg = <0 0x8000>; + reg = <0 0x80000>; label = "u-boot"; read-only; }; -- cgit v0.10.2 From 114785a619e3f28133a555692b3d0b417ab91e66 Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Mon, 12 Oct 2009 11:35:27 -0500 Subject: powerpc/8xxx: enable IPsec ESP by default on mpc83xx/mpc85xx Signed-off-by: Kim Phillips Signed-off-by: Kumar Gala diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig index 4a96cb6..d6d28f2 100644 --- a/arch/powerpc/configs/mpc83xx_defconfig +++ b/arch/powerpc/configs/mpc83xx_defconfig @@ -343,7 +343,8 @@ CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_STATISTICS is not set -# CONFIG_NET_KEY is not set +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set @@ -358,7 +359,7 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_ARPD is not set CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set +CONFIG_INET_ESP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set @@ -1591,7 +1592,7 @@ CONFIG_CRYPTO_PCBC=m # # Hash modes # -# CONFIG_CRYPTO_HMAC is not set +CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set # @@ -1605,16 +1606,16 @@ CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_RMD160 is not set # CONFIG_CRYPTO_RMD256 is not set # CONFIG_CRYPTO_RMD320 is not set -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set +CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_SHA256=y +CONFIG_CRYPTO_SHA512=y # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_WP512 is not set # # Ciphers # -# CONFIG_CRYPTO_AES is not set +CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_BLOWFISH is not set diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index ee6acc6..70851ee 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -345,7 +345,7 @@ CONFIG_XFRM_USER=y # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_STATISTICS is not set -CONFIG_NET_KEY=m +CONFIG_NET_KEY=y # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -369,12 +369,12 @@ CONFIG_IP_PIMSM_V2=y CONFIG_ARPD=y # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set +CONFIG_INET_ESP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set CONFIG_INET_TUNNEL=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y @@ -1769,16 +1769,16 @@ CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_RMD160 is not set # CONFIG_CRYPTO_RMD256 is not set # CONFIG_CRYPTO_RMD320 is not set -CONFIG_CRYPTO_SHA1=m -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set +CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_SHA256=y +CONFIG_CRYPTO_SHA512=y # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_WP512 is not set # # Ciphers # -# CONFIG_CRYPTO_AES is not set +CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_BLOWFISH is not set diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig index db082ce..ab45fd9 100644 --- a/arch/powerpc/configs/mpc85xx_smp_defconfig +++ b/arch/powerpc/configs/mpc85xx_smp_defconfig @@ -348,7 +348,7 @@ CONFIG_XFRM_USER=y # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_STATISTICS is not set -CONFIG_NET_KEY=m +CONFIG_NET_KEY=y # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -372,12 +372,12 @@ CONFIG_IP_PIMSM_V2=y CONFIG_ARPD=y # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set +CONFIG_INET_ESP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set CONFIG_INET_TUNNEL=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y @@ -1772,16 +1772,16 @@ CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_RMD160 is not set # CONFIG_CRYPTO_RMD256 is not set # CONFIG_CRYPTO_RMD320 is not set -CONFIG_CRYPTO_SHA1=m -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set +CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_SHA256=y +CONFIG_CRYPTO_SHA512=y # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_WP512 is not set # # Ciphers # -# CONFIG_CRYPTO_AES is not set +CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_BLOWFISH is not set -- cgit v0.10.2 From e9bcf1418c9ccff30f243005187bbfa659c2df74 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 5 Nov 2009 08:21:18 -0600 Subject: powerpc: 2.6.32 update of defconfigs for embedded 6xx/7xxx, 8xx, 8{3,5,6}xxx Updated mpc85xx_{smp_}defconfig to enable: * XES_MPC85xx board * PCI MSI * RapidIO Signed-off-by: Kumar Gala diff --git a/arch/powerpc/configs/83xx/asp8347_defconfig b/arch/powerpc/configs/83xx/asp8347_defconfig index a2df063..466f09a 100644 --- a/arch/powerpc/configs/83xx/asp8347_defconfig +++ b/arch/powerpc/configs/83xx/asp8347_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:02 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:20 2009 # # CONFIG_PPC64 is not set @@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -85,11 +86,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -125,28 +127,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -257,6 +260,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -274,6 +278,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -369,6 +374,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -398,6 +404,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -405,7 +412,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -418,6 +424,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -425,9 +432,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y @@ -628,7 +635,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -658,10 +667,7 @@ CONFIG_GIANFAR=y # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -760,6 +766,7 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -814,9 +821,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -834,6 +838,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -883,6 +892,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -894,7 +904,6 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set CONFIG_THERMAL=y # CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y @@ -934,6 +943,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -944,6 +954,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -990,6 +1001,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set @@ -1045,6 +1057,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set @@ -1146,6 +1159,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1215,7 +1229,6 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1327,6 +1340,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1344,6 +1358,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1365,7 +1380,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1407,11 +1421,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/83xx/kmeter1_defconfig b/arch/powerpc/configs/83xx/kmeter1_defconfig index 93ebd44..6694fb7 100644 --- a/arch/powerpc/configs/83xx/kmeter1_defconfig +++ b/arch/powerpc/configs/83xx/kmeter1_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:03 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:21 2009 # # CONFIG_PPC64 is not set @@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -86,11 +87,12 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_GROUP_SCHED is not set @@ -119,20 +121,19 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -140,6 +141,8 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -250,6 +253,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -267,6 +271,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -348,6 +353,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set CONFIG_STP=m @@ -396,9 +402,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -565,18 +571,16 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y CONFIG_FSL_PQ_MDIO=y # CONFIG_GIANFAR is not set CONFIG_UCC_GETH=y -# CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set # CONFIG_MV643XX_ETH is not set # CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -663,6 +667,7 @@ CONFIG_HW_RANDOM=y # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -693,9 +698,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -713,7 +715,6 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -732,6 +733,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -784,6 +786,7 @@ CONFIG_UIO=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set @@ -854,7 +857,6 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -926,6 +928,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -942,6 +945,7 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig index ff33a7d..86df19f 100644 --- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:04 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:22 2009 # # CONFIG_PPC64 is not set @@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +85,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -124,28 +126,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -256,6 +259,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -273,6 +277,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -369,6 +374,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -398,6 +404,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -405,7 +412,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -418,6 +424,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -427,9 +434,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set CONFIG_MTD_OF_PARTS=y @@ -488,6 +495,7 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_PMC551 is not set # CONFIG_MTD_DATAFLASH is not set # CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -605,6 +613,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -643,7 +652,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set @@ -741,9 +752,11 @@ CONFIG_E100=y # CONFIG_TLAN is not set # CONFIG_KS8842 is not set # CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -791,10 +804,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -896,6 +906,7 @@ CONFIG_HW_RANDOM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -950,9 +961,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -984,6 +992,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADCXX is not set @@ -1036,6 +1049,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1048,9 +1062,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_SENSORS_LIS3_SPI is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1088,8 +1100,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set @@ -1099,6 +1113,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1112,7 +1127,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1164,6 +1178,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set @@ -1255,6 +1270,7 @@ CONFIG_USB_GADGET_SELECTED=y # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set # CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_R8A66597 is not set # CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_S3C_HSOTG is not set # CONFIG_USB_GADGET_IMX is not set @@ -1273,6 +1289,7 @@ CONFIG_USB_GADGET_DUALSPEED=y # CONFIG_USB_AUDIO is not set CONFIG_USB_ETH=y CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_ETH_EEM is not set # CONFIG_USB_GADGETFS is not set # CONFIG_USB_FILE_STORAGE is not set # CONFIG_USB_G_SERIAL is not set @@ -1334,6 +1351,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set # # Platform RTC drivers @@ -1384,6 +1402,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1453,7 +1472,6 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1569,6 +1587,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1586,6 +1605,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1604,10 +1624,12 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1630,10 +1652,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1660,7 +1682,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1702,11 +1723,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig index 76237d4..7bf71d5 100644 --- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:05 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:23 2009 # # CONFIG_PPC64 is not set @@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +85,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -124,28 +126,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -256,6 +259,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -273,6 +277,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -369,6 +374,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -398,6 +404,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -405,7 +412,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -418,6 +424,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -427,9 +434,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set # CONFIG_MTD_OF_PARTS is not set @@ -488,6 +495,7 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_PMC551 is not set # CONFIG_MTD_DATAFLASH is not set # CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -605,6 +613,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -644,11 +653,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set @@ -671,6 +683,7 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -698,6 +711,7 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -802,9 +816,11 @@ CONFIG_E100=y # CONFIG_TLAN is not set # CONFIG_KS8842 is not set # CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -852,10 +868,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -957,6 +970,7 @@ CONFIG_HW_RANDOM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -1011,9 +1025,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1045,6 +1056,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADCXX is not set @@ -1097,6 +1113,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1109,9 +1126,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_SENSORS_LIS3_SPI is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1149,8 +1164,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set @@ -1160,6 +1177,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1173,7 +1191,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1225,6 +1242,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set @@ -1316,6 +1334,7 @@ CONFIG_USB_GADGET_SELECTED=y # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set # CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_R8A66597 is not set # CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_S3C_HSOTG is not set # CONFIG_USB_GADGET_IMX is not set @@ -1334,6 +1353,7 @@ CONFIG_USB_GADGET_DUALSPEED=y # CONFIG_USB_AUDIO is not set CONFIG_USB_ETH=y CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_ETH_EEM is not set # CONFIG_USB_GADGETFS is not set # CONFIG_USB_FILE_STORAGE is not set # CONFIG_USB_G_SERIAL is not set @@ -1395,6 +1415,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set # # Platform RTC drivers @@ -1445,6 +1466,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1514,7 +1536,6 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1630,6 +1651,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1647,6 +1669,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1665,10 +1688,12 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1691,10 +1716,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1721,7 +1746,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1763,11 +1787,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig index e0e36a1..7def835 100644 --- a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:06 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:24 2009 # # CONFIG_PPC64 is not set @@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +85,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -124,28 +126,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -257,6 +260,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -274,6 +278,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -369,6 +374,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -398,6 +404,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -405,7 +412,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -418,6 +424,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -504,6 +511,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -542,7 +550,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set @@ -612,7 +622,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -635,7 +647,6 @@ CONFIG_NETDEV_1000=y CONFIG_FSL_PQ_MDIO=y # CONFIG_GIANFAR is not set CONFIG_UCC_GETH=y -# CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set # CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set @@ -663,10 +674,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -759,6 +767,7 @@ CONFIG_HW_RANDOM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -812,9 +821,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -832,6 +838,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -881,6 +892,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -892,9 +904,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -927,6 +937,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -937,6 +948,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -950,7 +962,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -1070,6 +1081,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1128,7 +1140,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1202,6 +1213,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1219,6 +1231,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1240,7 +1253,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1282,11 +1294,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig index 4f27d45..b398b9b 100644 --- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:07 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:24 2009 # # CONFIG_PPC64 is not set @@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +85,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -124,28 +126,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -257,6 +260,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -274,6 +278,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -369,6 +374,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -398,6 +404,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -405,7 +412,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -418,6 +424,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -507,6 +514,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -545,7 +553,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set @@ -617,7 +627,9 @@ CONFIG_MII=y # CONFIG_B44 is not set # CONFIG_KS8842 is not set # CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -640,7 +652,6 @@ CONFIG_E1000=y CONFIG_FSL_PQ_MDIO=y # CONFIG_GIANFAR is not set CONFIG_UCC_GETH=y -# CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set # CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set @@ -668,10 +679,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -776,6 +784,7 @@ CONFIG_GEN_RTC=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -830,9 +839,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -863,6 +869,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADCXX is not set @@ -915,6 +926,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -927,9 +939,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_SENSORS_LIS3_SPI is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -967,8 +977,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set @@ -978,6 +990,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -991,7 +1004,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1043,6 +1055,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set @@ -1146,6 +1159,8 @@ CONFIG_MMC_BLOCK_BOUNCE=y # # CONFIG_MMC_SDHCI is not set # CONFIG_MMC_WBSD is not set +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set # CONFIG_MMC_TIFM_SD is not set CONFIG_MMC_SPI=y # CONFIG_MMC_CB710 is not set @@ -1186,6 +1201,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1247,7 +1263,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1365,6 +1380,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1382,6 +1398,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1403,7 +1420,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1445,11 +1461,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig index 648dac0..f67317e 100644 --- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:07 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:25 2009 # # CONFIG_PPC64 is not set @@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +85,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -124,28 +126,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -256,6 +259,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -273,6 +277,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -368,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -397,6 +403,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -404,7 +411,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -417,6 +423,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -424,9 +431,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set # CONFIG_MTD_PARTITIONS is not set -# CONFIG_MTD_TESTS is not set # # User Modules And Translation Layers @@ -483,6 +490,7 @@ CONFIG_MTD_PHYSMAP=y # CONFIG_MTD_PMC551 is not set # CONFIG_MTD_DATAFLASH is not set # CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -637,6 +645,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -676,11 +685,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set @@ -703,6 +715,7 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -730,6 +743,7 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -845,10 +859,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -930,6 +941,7 @@ CONFIG_HW_RANDOM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -984,9 +996,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -CONFIG_SENSORS_PCF8574=y -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1017,7 +1026,6 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1055,8 +1063,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set @@ -1066,6 +1076,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1111,6 +1122,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_OHCI_HCD is not set CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set @@ -1238,6 +1250,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set # # Platform RTC drivers @@ -1288,6 +1301,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1350,7 +1364,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1465,6 +1478,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1482,6 +1496,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1503,7 +1518,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1545,11 +1559,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig index bf6deb8..a668110 100644 --- a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:08 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:26 2009 # # CONFIG_PPC64 is not set @@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +85,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -124,28 +126,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -256,6 +259,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -273,6 +277,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -368,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -397,6 +403,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -404,7 +411,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -417,6 +423,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -424,9 +431,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set # CONFIG_MTD_PARTITIONS is not set -# CONFIG_MTD_TESTS is not set # # User Modules And Translation Layers @@ -483,6 +490,7 @@ CONFIG_MTD_PHYSMAP=y # CONFIG_MTD_PMC551 is not set # CONFIG_MTD_DATAFLASH is not set # CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -589,6 +597,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -627,7 +636,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set @@ -725,10 +736,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -810,6 +818,7 @@ CONFIG_HW_RANDOM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -864,9 +873,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -CONFIG_SENSORS_PCF8574=y -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -897,7 +903,6 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -935,8 +940,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set @@ -946,6 +953,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -991,6 +999,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_OHCI_HCD is not set CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set @@ -1059,6 +1068,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set @@ -1117,6 +1127,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set # # Platform RTC drivers @@ -1167,6 +1178,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1229,7 +1241,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1344,6 +1355,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1361,6 +1373,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1382,7 +1395,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1424,11 +1436,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig index 3236c47..c4e92ba 100644 --- a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:09 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:27 2009 # # CONFIG_PPC64 is not set @@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +85,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -124,28 +126,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -256,6 +259,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -273,6 +277,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -368,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -397,6 +403,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -404,7 +411,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -417,6 +423,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -556,9 +563,11 @@ CONFIG_E100=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -606,10 +615,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -699,6 +705,7 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -752,9 +759,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -772,6 +776,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -821,6 +830,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -832,9 +842,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -867,6 +875,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -877,6 +886,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -890,7 +900,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -1010,6 +1019,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1068,7 +1078,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1140,6 +1149,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1157,6 +1167,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1178,7 +1189,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1220,11 +1230,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig index 8c5299d..4f434b1 100644 --- a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:10 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:28 2009 # # CONFIG_PPC64 is not set @@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +85,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -124,28 +126,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -255,6 +258,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -272,6 +276,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -367,6 +372,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -396,6 +402,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -403,7 +410,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -416,6 +422,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -423,9 +430,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_OF_PARTS is not set @@ -585,6 +592,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -623,7 +631,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set @@ -693,7 +703,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -716,7 +728,6 @@ CONFIG_NETDEV_1000=y CONFIG_FSL_PQ_MDIO=y # CONFIG_GIANFAR is not set CONFIG_UCC_GETH=y -# CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set # CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set @@ -744,10 +755,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -840,6 +848,7 @@ CONFIG_HW_RANDOM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -893,9 +902,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -913,6 +919,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -962,6 +973,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -973,9 +985,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1008,6 +1018,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1018,6 +1029,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1031,7 +1043,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -1151,6 +1162,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1210,7 +1222,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1284,6 +1295,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1301,6 +1313,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1322,7 +1335,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1364,11 +1376,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig index ff31667..b52ec08 100644 --- a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig +++ b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:12 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:30 2009 # # CONFIG_PPC64 is not set @@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -85,11 +86,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -125,28 +127,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -255,6 +258,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -272,6 +276,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -369,6 +374,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -398,6 +404,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -405,7 +412,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -418,6 +424,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -427,9 +434,9 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_OF_PARTS is not set @@ -493,6 +500,7 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_PMC551 is not set # CONFIG_MTD_DATAFLASH is not set # CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -639,7 +647,6 @@ CONFIG_NETDEV_1000=y CONFIG_FSL_PQ_MDIO=y # CONFIG_GIANFAR is not set CONFIG_UCC_GETH=y -# CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set # CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set @@ -649,10 +656,7 @@ CONFIG_UCC_GETH=y # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -750,6 +754,7 @@ CONFIG_HW_RANDOM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -804,9 +809,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -853,17 +855,22 @@ CONFIG_GPIOLIB=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # # CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -897,8 +904,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set @@ -908,6 +917,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -992,7 +1002,6 @@ CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -1038,6 +1047,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1107,7 +1117,6 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1183,6 +1192,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1200,6 +1210,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1232,7 +1243,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1274,11 +1284,13 @@ CONFIG_CRYPTO_CBC=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig index e285ec0..7300615 100644 --- a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:11 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:29 2009 # # CONFIG_PPC64 is not set @@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +85,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -125,21 +127,20 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -147,6 +148,8 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -256,6 +259,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -273,6 +277,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -368,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -397,6 +403,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -404,7 +411,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -417,6 +423,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -503,6 +510,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -542,11 +550,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set @@ -569,6 +580,7 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -596,6 +608,7 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -672,7 +685,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -720,10 +735,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -816,6 +828,7 @@ CONFIG_GEN_RTC=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -869,9 +882,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -889,6 +899,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -938,6 +953,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -949,9 +965,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -984,6 +998,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -994,6 +1009,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1007,7 +1023,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -1072,6 +1087,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1130,7 +1146,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1206,6 +1221,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1221,6 +1237,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1242,7 +1259,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1284,11 +1300,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig index 1ab3e4c..9e9158a 100644 --- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:13 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:30 2009 # # CONFIG_PPC64 is not set @@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +85,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -125,21 +127,20 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -147,6 +148,8 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -256,6 +259,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -273,6 +277,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -363,6 +368,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -392,6 +398,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -399,7 +406,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -412,6 +418,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -498,6 +505,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -537,11 +545,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set @@ -564,6 +575,7 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -591,6 +603,7 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -610,6 +623,7 @@ CONFIG_MD_RAID1=y # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=y CONFIG_MD_RAID6_PQ=y +# CONFIG_ASYNC_RAID6_TEST is not set # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set # CONFIG_BLK_DEV_DM is not set @@ -678,7 +692,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -708,10 +724,7 @@ CONFIG_GIANFAR=y # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -813,6 +826,7 @@ CONFIG_GEN_RTC=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -867,9 +881,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -887,6 +898,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -936,6 +952,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -947,9 +964,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -987,6 +1002,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -997,6 +1013,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1010,7 +1027,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1033,6 +1049,7 @@ CONFIG_HID_CYPRESS=y CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_TWINHAN is not set # CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set @@ -1085,6 +1102,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set @@ -1142,6 +1160,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set @@ -1188,6 +1207,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1246,7 +1266,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1361,6 +1380,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1376,6 +1396,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1396,12 +1417,13 @@ CONFIG_XOR_BLOCKS=y CONFIG_ASYNC_CORE=y CONFIG_ASYNC_MEMCPY=y CONFIG_ASYNC_XOR=y +CONFIG_ASYNC_PQ=y +CONFIG_ASYNC_RAID6_RECOV=y CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1443,11 +1465,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig index 3a68f86..6b39915 100644 --- a/arch/powerpc/configs/83xx/sbc834x_defconfig +++ b/arch/powerpc/configs/83xx/sbc834x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc5 -# Tue Aug 11 19:57:51 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:31 2009 # # CONFIG_PPC64 is not set @@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +85,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -124,27 +126,28 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -254,6 +257,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -271,6 +275,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -366,6 +371,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -395,6 +401,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -402,7 +409,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -415,6 +421,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -422,9 +429,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -651,7 +658,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -681,10 +690,7 @@ CONFIG_GIANFAR=y # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -786,6 +792,7 @@ CONFIG_GEN_RTC=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -840,9 +847,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -860,6 +864,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -909,6 +918,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -920,9 +930,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -960,6 +968,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -970,6 +979,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -983,7 +993,6 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1035,6 +1044,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set @@ -1148,6 +1158,7 @@ CONFIG_JBD=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1207,7 +1218,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1306,6 +1316,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1321,6 +1332,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1342,7 +1354,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1384,11 +1395,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/85xx/ksi8560_defconfig b/arch/powerpc/configs/85xx/ksi8560_defconfig index ff04e10..a5bde8d 100644 --- a/arch/powerpc/configs/85xx/ksi8560_defconfig +++ b/arch/powerpc/configs/85xx/ksi8560_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:14 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:32 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set @@ -36,6 +37,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -85,11 +87,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_GROUP_SCHED is not set @@ -123,28 +126,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -188,6 +192,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_MPC85xx_RDB is not set # CONFIG_SOCRATES is not set CONFIG_KSI8560=y # CONFIG_XES_MPC85xx is not set @@ -243,6 +248,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -260,6 +266,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -348,6 +355,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -377,6 +385,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -384,7 +393,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -397,6 +405,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -582,6 +591,8 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set CONFIG_FS_ENET_HAS_FCC=y @@ -591,10 +602,7 @@ CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y # CONFIG_MV643XX_ETH is not set CONFIG_NETDEV_10000=y - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -704,10 +712,19 @@ CONFIG_GPIOLIB=y # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_IT87 is not set @@ -719,9 +736,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -755,7 +770,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -818,6 +832,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -877,7 +892,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -945,6 +959,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -962,6 +977,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -981,10 +997,12 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1008,10 +1026,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1039,7 +1057,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1070,11 +1087,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig index fb10cc8..c10e26f 100644 --- a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig +++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:15 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:33 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set @@ -36,6 +37,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +86,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -126,27 +129,28 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -189,6 +193,7 @@ CONFIG_MPC8540_ADS=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_MPC85xx_RDB is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_XES_MPC85xx is not set @@ -244,6 +249,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -261,6 +267,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -349,6 +356,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -378,6 +386,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -385,7 +394,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -398,6 +406,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -483,15 +492,14 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y # CONFIG_MV643XX_ETH is not set CONFIG_NETDEV_10000=y - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -588,6 +596,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_IT87 is not set @@ -598,9 +611,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -634,7 +645,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -696,6 +706,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -754,7 +765,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -822,6 +832,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -839,6 +850,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -857,10 +869,12 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -883,10 +897,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -912,7 +926,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -943,11 +956,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig index 5c8ce69..8d9f0a4 100644 --- a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig +++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:16 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:34 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set @@ -36,6 +37,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -85,11 +87,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -127,29 +130,30 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -192,6 +196,7 @@ CONFIG_MPC8560_ADS=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_MPC85xx_RDB is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_XES_MPC85xx is not set @@ -247,6 +252,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -264,6 +270,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -361,6 +368,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -390,6 +398,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -397,7 +406,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -410,6 +418,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -530,7 +539,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set CONFIG_FS_ENET_HAS_FCC=y @@ -582,10 +593,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -698,14 +706,24 @@ CONFIG_GPIOLIB=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set @@ -721,9 +739,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -746,6 +762,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -759,7 +776,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -824,6 +840,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -882,7 +899,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -950,6 +966,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -967,6 +984,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -985,10 +1003,12 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1011,10 +1031,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1040,7 +1060,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1071,11 +1090,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig index 158e63e..9b63e25 100644 --- a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig +++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:17 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:35 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set @@ -36,6 +37,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +86,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -126,28 +129,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -190,6 +194,7 @@ CONFIG_MPC85xx_CDS=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_MPC85xx_RDB is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_XES_MPC85xx is not set @@ -245,6 +250,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -262,6 +268,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -359,6 +366,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -388,6 +396,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -395,7 +404,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -408,6 +416,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -582,7 +591,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -630,10 +641,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -737,6 +745,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set @@ -751,9 +764,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -776,6 +787,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -789,7 +801,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -854,6 +865,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -912,7 +924,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -980,6 +991,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -997,6 +1009,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1015,10 +1028,12 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1041,10 +1056,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1070,7 +1085,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1101,11 +1115,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/85xx/sbc8548_defconfig b/arch/powerpc/configs/85xx/sbc8548_defconfig index 2726fca1..1b23568 100644 --- a/arch/powerpc/configs/85xx/sbc8548_defconfig +++ b/arch/powerpc/configs/85xx/sbc8548_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:18 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:36 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set @@ -36,6 +37,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +86,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -125,27 +128,28 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -188,6 +192,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_MPC85xx_RDB is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_XES_MPC85xx is not set @@ -242,6 +247,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -259,6 +265,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -355,6 +362,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -384,6 +392,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -391,7 +400,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -404,6 +412,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -521,7 +530,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -569,10 +580,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -676,6 +684,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set @@ -690,9 +703,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -715,6 +726,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -758,6 +770,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -816,7 +829,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -872,6 +884,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -887,6 +900,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -907,7 +921,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -938,11 +951,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/85xx/sbc8560_defconfig b/arch/powerpc/configs/85xx/sbc8560_defconfig index b0c4698..959d028 100644 --- a/arch/powerpc/configs/85xx/sbc8560_defconfig +++ b/arch/powerpc/configs/85xx/sbc8560_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:19 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:37 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set @@ -36,6 +37,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +86,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -126,26 +129,27 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -188,6 +192,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_MPC85xx_RDB is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_XES_MPC85xx is not set @@ -242,6 +247,7 @@ CONFIG_BINFMT_MISC=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -259,6 +265,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -347,6 +354,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -376,6 +384,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -383,7 +392,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -396,6 +404,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -481,15 +490,14 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y # CONFIG_MV643XX_ETH is not set CONFIG_NETDEV_10000=y - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -584,6 +592,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_IT87 is not set @@ -594,9 +607,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -630,7 +641,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -721,6 +731,7 @@ CONFIG_RTC_DRV_M48T59=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -779,7 +790,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -847,6 +857,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -863,6 +874,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -881,10 +893,12 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -907,10 +921,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -947,7 +961,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -978,11 +991,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/85xx/socrates_defconfig b/arch/powerpc/configs/85xx/socrates_defconfig index 04c85da..7f5ec35 100644 --- a/arch/powerpc/configs/85xx/socrates_defconfig +++ b/arch/powerpc/configs/85xx/socrates_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:19 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:37 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set @@ -36,6 +37,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +86,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=16 CONFIG_GROUP_SCHED=y @@ -124,28 +127,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -193,6 +197,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_MPC85xx_RDB is not set CONFIG_SOCRATES=y # CONFIG_KSI8560 is not set # CONFIG_XES_MPC85xx is not set @@ -247,6 +252,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -264,6 +270,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -358,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -396,6 +404,7 @@ CONFIG_CAN_BCM=y # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -403,7 +412,6 @@ CONFIG_WIRELESS=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -421,9 +429,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -482,6 +490,7 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_PMC551 is not set # CONFIG_MTD_DATAFLASH is not set # CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -668,7 +677,9 @@ CONFIG_MII=y # CONFIG_B44 is not set # CONFIG_KS8842 is not set # CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -698,10 +709,7 @@ CONFIG_GIANFAR=y # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -765,6 +773,7 @@ CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MCS5000 is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set # CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set @@ -774,7 +783,6 @@ CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set # CONFIG_TOUCHSCREEN_TSC2007 is not set -# CONFIG_TOUCHSCREEN_W90X900 is not set # CONFIG_INPUT_MISC is not set # @@ -834,6 +842,7 @@ CONFIG_HW_RANDOM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -888,9 +897,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -921,6 +927,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y CONFIG_HWMON_VID=y +CONFIG_HWMON_DEBUG_CHIP=y + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADCXX is not set @@ -973,6 +984,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -985,9 +997,7 @@ CONFIG_SENSORS_W83781D=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_SENSORS_LIS3_SPI is not set -CONFIG_HWMON_DEBUG_CHIP=y # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1006,8 +1016,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set @@ -1017,6 +1029,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -1112,7 +1125,6 @@ CONFIG_FONT_8x16=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1135,6 +1147,7 @@ CONFIG_USB_HID=y # CONFIG_HID_EZKEY is not set # CONFIG_HID_KYE is not set # CONFIG_HID_GYRATION is not set +# CONFIG_HID_TWINHAN is not set # CONFIG_HID_KENSINGTON is not set # CONFIG_HID_LOGITECH is not set # CONFIG_HID_MICROSOFT is not set @@ -1184,6 +1197,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set @@ -1319,6 +1333,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set # # Platform RTC drivers @@ -1369,6 +1384,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1438,7 +1454,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1552,6 +1567,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1569,6 +1585,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1589,7 +1606,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1621,11 +1637,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/85xx/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig index e7e81d6..c8327e8 100644 --- a/arch/powerpc/configs/85xx/stx_gp3_defconfig +++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:20 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:38 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set @@ -36,6 +37,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -85,11 +87,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -127,22 +130,21 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -150,7 +152,9 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -197,6 +201,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_MPC85xx_RDB is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_XES_MPC85xx is not set @@ -252,6 +257,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -269,6 +275,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -426,6 +433,7 @@ CONFIG_IP_NF_FILTER=m # CONFIG_IP_NF_ARPTABLES is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -455,6 +463,7 @@ CONFIG_NET_PKTGEN=y # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -462,7 +471,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -475,6 +483,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -622,6 +631,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -662,7 +672,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set @@ -732,8 +744,10 @@ CONFIG_NET_ETHERNET=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_NET_POCKET is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set # CONFIG_FS_ENET is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -782,10 +796,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -827,11 +838,15 @@ CONFIG_INPUT_EVDEV=m # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set CONFIG_KEYBOARD_ATKBD=y +# CONFIG_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_GPIO is not set # CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_XTKBD is not set @@ -842,6 +857,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set @@ -909,6 +925,7 @@ CONFIG_HW_RANDOM=m CONFIG_DEVPORT=y CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=m CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=m @@ -967,9 +984,6 @@ CONFIG_I2C_ALGOBIT=m # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1003,14 +1017,24 @@ CONFIG_GPIOLIB=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -1061,6 +1085,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1072,9 +1097,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1092,6 +1115,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TPS65010 is not set # CONFIG_MFD_TMIO is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1102,6 +1126,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # CONFIG_AGP=m +CONFIG_VGA_ARB=y CONFIG_DRM=m # CONFIG_DRM_TDFX is not set # CONFIG_DRM_R128 is not set @@ -1125,7 +1150,6 @@ CONFIG_SOUND=m # CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -1190,6 +1214,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1254,7 +1279,6 @@ CONFIG_CRAMFS=m # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1352,6 +1376,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1369,6 +1394,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1388,10 +1414,12 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1414,10 +1442,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1443,7 +1471,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1475,11 +1502,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/85xx/tqm8540_defconfig b/arch/powerpc/configs/85xx/tqm8540_defconfig index 2c40752..82563703 100644 --- a/arch/powerpc/configs/85xx/tqm8540_defconfig +++ b/arch/powerpc/configs/85xx/tqm8540_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:21 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:39 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set @@ -36,6 +37,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +86,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -124,28 +127,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -188,6 +192,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_MPC85xx_RDB is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_XES_MPC85xx is not set @@ -243,6 +248,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -260,6 +266,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -354,6 +361,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -383,6 +391,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -390,7 +399,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -677,9 +685,11 @@ CONFIG_E100=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -727,10 +737,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -824,6 +831,7 @@ CONFIG_GEN_RTC=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -876,9 +884,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -896,6 +901,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +CONFIG_HWMON_DEBUG_CHIP=y + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -945,6 +955,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -956,9 +967,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -CONFIG_HWMON_DEBUG_CHIP=y # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -977,6 +986,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -987,6 +997,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -1000,7 +1011,6 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -1065,6 +1075,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1134,7 +1145,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -1203,6 +1213,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1220,6 +1231,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1240,7 +1252,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1271,11 +1282,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/85xx/tqm8541_defconfig b/arch/powerpc/configs/85xx/tqm8541_defconfig index 845731d..91d85d73 100644 --- a/arch/powerpc/configs/85xx/tqm8541_defconfig +++ b/arch/powerpc/configs/85xx/tqm8541_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:22 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:40 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set @@ -36,6 +37,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -85,11 +87,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -125,29 +128,30 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -190,6 +194,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_MPC85xx_RDB is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_XES_MPC85xx is not set @@ -246,6 +251,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -263,6 +269,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -357,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -386,6 +394,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -393,7 +402,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -681,9 +689,11 @@ CONFIG_E100=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set # CONFIG_FS_ENET is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -732,10 +742,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -831,6 +838,7 @@ CONFIG_GEN_RTC=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -886,9 +894,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -921,14 +926,24 @@ CONFIG_GPIOLIB=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +CONFIG_HWMON_DEBUG_CHIP=y + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -979,6 +994,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -990,9 +1006,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -CONFIG_HWMON_DEBUG_CHIP=y # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1012,6 +1026,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1022,6 +1037,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -1035,7 +1051,6 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -1100,6 +1115,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1169,7 +1185,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -1238,6 +1253,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1255,6 +1271,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1275,7 +1292,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1306,11 +1322,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/85xx/tqm8548_defconfig b/arch/powerpc/configs/85xx/tqm8548_defconfig index 4f228a9..debe268 100644 --- a/arch/powerpc/configs/85xx/tqm8548_defconfig +++ b/arch/powerpc/configs/85xx/tqm8548_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:23 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:41 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set @@ -36,6 +37,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +86,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -126,22 +129,21 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -149,6 +151,8 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -196,6 +200,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_MPC85xx_RDB is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_XES_MPC85xx is not set @@ -252,6 +257,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -269,6 +275,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -371,6 +378,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -411,6 +419,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -420,9 +429,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set CONFIG_MTD_OF_PARTS=y @@ -630,7 +639,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -678,10 +689,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -772,6 +780,7 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -825,9 +834,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -845,6 +851,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -894,6 +905,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -905,9 +917,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -926,6 +936,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -936,6 +947,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -949,7 +961,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -1042,6 +1053,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1111,7 +1123,6 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -1180,6 +1191,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1197,6 +1209,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1216,10 +1229,12 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1242,10 +1257,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1271,7 +1286,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1303,11 +1317,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/85xx/tqm8555_defconfig b/arch/powerpc/configs/85xx/tqm8555_defconfig index 9196724..7451550 100644 --- a/arch/powerpc/configs/85xx/tqm8555_defconfig +++ b/arch/powerpc/configs/85xx/tqm8555_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:24 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:42 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set @@ -36,6 +37,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -85,11 +87,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -125,29 +128,30 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -190,6 +194,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_MPC85xx_RDB is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_XES_MPC85xx is not set @@ -246,6 +251,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -263,6 +269,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -357,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -386,6 +394,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -393,7 +402,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -681,9 +689,11 @@ CONFIG_E100=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set # CONFIG_FS_ENET is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -732,10 +742,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -831,6 +838,7 @@ CONFIG_GEN_RTC=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -886,9 +894,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -921,14 +926,24 @@ CONFIG_GPIOLIB=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +CONFIG_HWMON_DEBUG_CHIP=y + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -979,6 +994,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -990,9 +1006,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -CONFIG_HWMON_DEBUG_CHIP=y # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1012,6 +1026,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1022,6 +1037,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -1035,7 +1051,6 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -1100,6 +1115,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1169,7 +1185,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -1238,6 +1253,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1255,6 +1271,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1275,7 +1292,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1306,11 +1322,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/85xx/tqm8560_defconfig b/arch/powerpc/configs/85xx/tqm8560_defconfig index 2e49a6e..631d92b 100644 --- a/arch/powerpc/configs/85xx/tqm8560_defconfig +++ b/arch/powerpc/configs/85xx/tqm8560_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:25 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:43 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set @@ -36,6 +37,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -85,11 +87,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -125,29 +128,30 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -190,6 +194,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_MPC85xx_RDB is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_XES_MPC85xx is not set @@ -246,6 +251,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -263,6 +269,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -357,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -386,6 +394,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -393,7 +402,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -681,9 +689,11 @@ CONFIG_E100=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set # CONFIG_FS_ENET is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -732,10 +742,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -831,6 +838,7 @@ CONFIG_GEN_RTC=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -886,9 +894,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -921,14 +926,24 @@ CONFIG_GPIOLIB=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +CONFIG_HWMON_DEBUG_CHIP=y + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -979,6 +994,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -990,9 +1006,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -CONFIG_HWMON_DEBUG_CHIP=y # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1012,6 +1026,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1022,6 +1037,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -1035,7 +1051,6 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -1100,6 +1115,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1169,7 +1185,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -1238,6 +1253,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1255,6 +1271,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1275,7 +1292,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1306,11 +1322,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig index 1025da2..52acbac 100644 --- a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig +++ b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:25 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:44 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set CONFIG_SMP=y @@ -37,6 +38,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -89,11 +91,12 @@ CONFIG_AUDIT=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -128,22 +131,21 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -151,7 +153,9 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -201,6 +205,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_MPC85xx_RDB is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set CONFIG_XES_MPC85xx=y @@ -256,6 +261,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_IRQ_ALL_CPUS is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -273,6 +279,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -405,6 +412,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -446,6 +454,7 @@ CONFIG_FIB_RULES=y # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -457,9 +466,9 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set @@ -635,6 +644,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -674,11 +684,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y # CONFIG_SATA_SIL24 is not set @@ -701,6 +714,7 @@ CONFIG_ATA_SFF=y CONFIG_PATA_ALI=y # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -728,6 +742,7 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -804,7 +819,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -834,10 +851,7 @@ CONFIG_GIANFAR=y # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -951,6 +965,7 @@ CONFIG_NVRAM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -1006,8 +1021,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1041,14 +1054,24 @@ CONFIG_GPIO_PCA953X=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -1099,6 +1122,7 @@ CONFIG_SENSORS_LM90=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1110,9 +1134,7 @@ CONFIG_SENSORS_LM90=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1151,6 +1173,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1161,6 +1184,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -1181,7 +1205,6 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1204,6 +1227,7 @@ CONFIG_USB_HID=y # CONFIG_HID_EZKEY is not set # CONFIG_HID_KYE is not set # CONFIG_HID_GYRATION is not set +# CONFIG_HID_TWINHAN is not set # CONFIG_HID_KENSINGTON is not set # CONFIG_HID_LOGITECH is not set # CONFIG_HID_MICROSOFT is not set @@ -1249,6 +1273,7 @@ CONFIG_USB_MON=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_ISP1760_HCD=y +# CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set @@ -1466,6 +1491,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1541,7 +1567,6 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1658,6 +1683,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1675,6 +1701,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1694,10 +1721,12 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set @@ -1720,10 +1749,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1749,7 +1778,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1790,11 +1818,13 @@ CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig index 527ad1a..2898073 100644 --- a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig +++ b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:31 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:49 2009 # # CONFIG_PPC64 is not set @@ -36,6 +36,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -88,11 +89,12 @@ CONFIG_BSD_PROCESS_ACCT_V3=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -130,21 +132,20 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -152,12 +153,14 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling # -# CONFIG_SLOW_WORK is not set +CONFIG_SLOW_WORK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -256,6 +259,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -273,6 +277,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -417,6 +422,7 @@ CONFIG_IPV6_TUNNEL=m # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -458,6 +464,7 @@ CONFIG_FIB_RULES=y # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -467,9 +474,9 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set CONFIG_MTD_OF_PARTS=y @@ -680,6 +687,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -719,12 +727,15 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set @@ -747,6 +758,7 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -775,6 +787,7 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_PCMCIA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -851,7 +864,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -881,10 +896,7 @@ CONFIG_GIANFAR=y # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -1016,6 +1028,7 @@ CONFIG_NVRAM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -1071,9 +1084,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # CONFIG_DS1682=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1106,14 +1116,24 @@ CONFIG_GPIO_SYSFS=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -1164,6 +1184,7 @@ CONFIG_SENSORS_LM92=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1175,9 +1196,7 @@ CONFIG_SENSORS_LM92=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1217,6 +1236,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1227,6 +1247,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1247,7 +1268,6 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1270,6 +1290,7 @@ CONFIG_HID_CYPRESS=y CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_TWINHAN is not set # CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set @@ -1322,6 +1343,7 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set @@ -1397,6 +1419,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set @@ -1501,6 +1524,7 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1576,7 +1600,6 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1682,6 +1705,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1697,6 +1721,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1718,7 +1743,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=m @@ -1761,11 +1785,13 @@ CONFIG_CRYPTO_CBC=y # CONFIG_CRYPTO_HMAC=m # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/arch/powerpc/configs/86xx/gef_sbc310_defconfig index cd338d4..e199d1c 100644 --- a/arch/powerpc/configs/86xx/gef_sbc310_defconfig +++ b/arch/powerpc/configs/86xx/gef_sbc310_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:29 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:47 2009 # # CONFIG_PPC64 is not set @@ -36,6 +36,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -88,11 +89,12 @@ CONFIG_BSD_PROCESS_ACCT_V3=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -130,21 +132,20 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -152,12 +153,14 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling # -# CONFIG_SLOW_WORK is not set +CONFIG_SLOW_WORK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -256,6 +259,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -273,6 +277,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -417,6 +422,7 @@ CONFIG_IPV6_TUNNEL=m # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -458,6 +464,7 @@ CONFIG_FIB_RULES=y # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -467,9 +474,9 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set CONFIG_MTD_OF_PARTS=y @@ -680,6 +687,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -719,12 +727,15 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set CONFIG_SATA_SIL24=y @@ -796,7 +807,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -826,10 +839,7 @@ CONFIG_GIANFAR=y # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -961,6 +971,7 @@ CONFIG_NVRAM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -1016,9 +1027,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # CONFIG_DS1682=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1051,14 +1059,24 @@ CONFIG_GPIO_SYSFS=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -1109,6 +1127,7 @@ CONFIG_SENSORS_LM92=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1120,9 +1139,7 @@ CONFIG_SENSORS_LM92=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1162,6 +1179,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1172,6 +1190,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1192,7 +1211,6 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1215,6 +1233,7 @@ CONFIG_HID_CYPRESS=y CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_TWINHAN is not set # CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set @@ -1267,6 +1286,7 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set @@ -1342,6 +1362,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set @@ -1446,6 +1467,7 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1521,7 +1543,6 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1627,6 +1648,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1642,6 +1664,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1663,7 +1686,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=m @@ -1706,11 +1728,13 @@ CONFIG_CRYPTO_CBC=y # CONFIG_CRYPTO_HMAC=m # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig index ba47883..3b0fbfb 100644 --- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig +++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:30 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:48 2009 # # CONFIG_PPC64 is not set @@ -36,6 +36,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -88,11 +89,12 @@ CONFIG_BSD_PROCESS_ACCT_V3=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -131,21 +133,20 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -153,12 +154,14 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling # -# CONFIG_SLOW_WORK is not set +CONFIG_SLOW_WORK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -257,6 +260,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -274,6 +278,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -503,6 +508,7 @@ CONFIG_IP_SCTP=m # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y +# CONFIG_RDS is not set CONFIG_TIPC=m # CONFIG_TIPC_ADVANCED is not set # CONFIG_TIPC_DEBUG is not set @@ -582,6 +588,7 @@ CONFIG_NET_PKTGEN=m CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -589,7 +596,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -602,6 +608,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -611,9 +618,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set # CONFIG_MTD_OF_PARTS is not set @@ -780,6 +787,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -819,11 +827,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set @@ -846,6 +857,7 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -873,6 +885,7 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -949,7 +962,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -979,10 +994,7 @@ CONFIG_GIANFAR=y # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -1120,6 +1132,7 @@ CONFIG_HW_RANDOM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -1175,9 +1188,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # CONFIG_DS1682=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1211,14 +1221,24 @@ CONFIG_GPIOLIB=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -1269,6 +1289,7 @@ CONFIG_SENSORS_LM92=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1280,9 +1301,7 @@ CONFIG_SENSORS_LM92=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1322,6 +1341,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1332,6 +1352,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1352,7 +1373,6 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1375,6 +1395,7 @@ CONFIG_HID_CYPRESS=y CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_TWINHAN is not set # CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set @@ -1427,6 +1448,7 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set @@ -1502,6 +1524,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_ATM is not set @@ -1607,6 +1630,7 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1669,7 +1693,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1775,6 +1798,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1791,6 +1815,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_KMEMLEAK is not set CONFIG_DEBUG_PREEMPT=y # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1810,10 +1835,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1837,10 +1864,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1872,7 +1899,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=m @@ -1915,11 +1941,13 @@ CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_GHASH is not set CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m diff --git a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig index a61f183..de4d525 100644 --- a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig +++ b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:27 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:45 2009 # # CONFIG_PPC64 is not set @@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -83,11 +84,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -126,22 +128,21 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -149,6 +150,8 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -251,6 +254,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -268,6 +272,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -385,6 +390,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -414,6 +420,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -421,7 +428,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -434,6 +440,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -445,9 +452,9 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_OF_PARTS is not set @@ -662,6 +669,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -701,11 +709,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y # CONFIG_SATA_SIL24 is not set @@ -728,6 +739,7 @@ CONFIG_ATA_SFF=y CONFIG_PATA_ALI=y # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -755,6 +767,7 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -818,14 +831,13 @@ CONFIG_ULI526X=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -929,6 +941,7 @@ CONFIG_UNIX98_PTYS=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y # CONFIG_I2C_CHARDEV is not set CONFIG_I2C_HELPER_AUTO=y @@ -982,9 +995,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1002,7 +1012,6 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1021,6 +1030,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1031,6 +1041,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -1107,6 +1118,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_LOGO is not set CONFIG_SOUND=y CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -1209,7 +1221,6 @@ CONFIG_SND_SOC_CS4270_VD33_ERRATA=y # CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -1329,6 +1340,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set @@ -1388,7 +1400,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1505,6 +1516,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1522,6 +1534,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1541,10 +1554,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1567,10 +1582,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1597,7 +1612,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1629,11 +1643,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig index 7016ce7..754a79b 100644 --- a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig +++ b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:28 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:46 2009 # # CONFIG_PPC64 is not set @@ -36,6 +36,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -87,11 +88,12 @@ CONFIG_AUDIT=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -130,22 +132,21 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -153,7 +154,9 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -251,13 +254,13 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m CONFIG_IOMMU_HELPER=y CONFIG_SWIOTLB=y -CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set # CONFIG_IRQ_ALL_CPUS is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -275,6 +278,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -404,6 +408,7 @@ CONFIG_IP_SCTP=m # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -434,6 +439,7 @@ CONFIG_SCTP_HMAC_MD5=y CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -441,7 +447,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -454,6 +459,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -546,6 +552,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -585,11 +592,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y # CONFIG_SATA_SIL24 is not set @@ -612,6 +622,7 @@ CONFIG_ATA_SFF=y CONFIG_PATA_ALI=y # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -639,6 +650,7 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -715,7 +727,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -763,10 +777,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -880,6 +891,7 @@ CONFIG_NVRAM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y # CONFIG_I2C_CHARDEV is not set CONFIG_I2C_HELPER_AUTO=y @@ -934,9 +946,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -954,7 +963,6 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -973,6 +981,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -983,6 +992,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -1002,6 +1012,7 @@ CONFIG_VGA_CONSOLE=y CONFIG_DUMMY_CONSOLE=y CONFIG_SOUND=y CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -1105,7 +1116,6 @@ CONFIG_SND_USB=y CONFIG_AC97_BUS=y CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1128,6 +1138,7 @@ CONFIG_HID_CYPRESS=y CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_TWINHAN is not set # CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set @@ -1180,6 +1191,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y CONFIG_USB_OHCI_HCD_PPC_OF_LE=y @@ -1358,6 +1370,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1428,7 +1441,6 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1546,6 +1558,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1563,6 +1576,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1582,10 +1596,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1608,10 +1624,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1638,7 +1654,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1680,11 +1695,13 @@ CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/86xx/sbc8641d_defconfig b/arch/powerpc/configs/86xx/sbc8641d_defconfig index f5ca2e0..89991f1 100644 --- a/arch/powerpc/configs/86xx/sbc8641d_defconfig +++ b/arch/powerpc/configs/86xx/sbc8641d_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:26 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:45 2009 # # CONFIG_PPC64 is not set @@ -36,6 +36,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -87,11 +88,12 @@ CONFIG_BSD_PROCESS_ACCT_V3=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -130,21 +132,20 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -152,13 +153,15 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling # # CONFIG_GCOV_KERNEL is not set -# CONFIG_SLOW_WORK is not set +CONFIG_SLOW_WORK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -257,6 +260,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -274,6 +278,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -502,6 +507,7 @@ CONFIG_IP_SCTP=m # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y +# CONFIG_RDS is not set CONFIG_TIPC=m # CONFIG_TIPC_ADVANCED is not set # CONFIG_TIPC_DEBUG is not set @@ -581,6 +587,7 @@ CONFIG_NET_PKTGEN=m CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -588,7 +595,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -601,6 +607,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -610,9 +617,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set # CONFIG_MTD_OF_PARTS is not set @@ -833,7 +840,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -863,10 +872,7 @@ CONFIG_GIANFAR=y # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -996,6 +1002,7 @@ CONFIG_HW_RANDOM=m CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -1049,9 +1056,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1069,6 +1073,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -1118,6 +1127,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1129,9 +1139,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1164,6 +1172,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1174,6 +1183,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1194,7 +1204,6 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -1274,6 +1283,7 @@ CONFIG_OCFS2_DEBUG_MASKLOG=y # CONFIG_OCFS2_DEBUG_FS is not set # CONFIG_OCFS2_FS_POSIX_ACL is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1343,7 +1353,6 @@ CONFIG_ROMFS_BACKED_BY_BLOCK=y CONFIG_ROMFS_ON_BLOCK=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1451,6 +1460,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1467,6 +1477,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_KMEMLEAK is not set CONFIG_DEBUG_PREEMPT=y # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1486,10 +1497,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1514,10 +1527,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1550,7 +1563,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=m @@ -1593,11 +1605,13 @@ CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_GHASH is not set CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig index aece6bb..052cf13 100644 --- a/arch/powerpc/configs/adder875_defconfig +++ b/arch/powerpc/configs/adder875_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:31:47 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:04 2009 # # CONFIG_PPC64 is not set @@ -16,6 +16,7 @@ CONFIG_PPC_8xx=y # CONFIG_E200 is not set CONFIG_8xx=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -29,6 +30,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -78,11 +80,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -116,28 +119,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -235,10 +239,10 @@ CONFIG_BINFMT_ELF=y # CONFIG_8XX_MINIMAL_FPEMU is not set # CONFIG_IOMMU_HELPER is not set # CONFIG_SWIOTLB is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -256,6 +260,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -338,6 +343,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -367,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -374,7 +381,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -387,6 +393,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -530,16 +537,15 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set CONFIG_FS_ENET_HAS_FEC=y CONFIG_FS_ENET_MDIO_FEC=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -580,6 +586,7 @@ CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_XTKBD is not set @@ -590,6 +597,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_VSXXXAA is not set @@ -716,6 +724,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set @@ -775,7 +784,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -847,6 +855,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -864,6 +873,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_LOCK_ALLOC is not set @@ -880,10 +890,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -906,10 +918,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig index 8105360..0fb65a8 100644 --- a/arch/powerpc/configs/c2k_defconfig +++ b/arch/powerpc/configs/c2k_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:31:48 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:05 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_PPC_HAVE_PMU_SUPPORT=y +CONFIG_PPC_PERF_CTRS=y # CONFIG_SMP is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_CHECK_CACHE_COHERENCY=y @@ -36,6 +37,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -88,11 +90,12 @@ CONFIG_AUDIT_TREE=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 CONFIG_GROUP_SCHED=y @@ -135,23 +138,24 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +CONFIG_PERF_EVENTS=y +CONFIG_EVENT_PROFILE=y # CONFIG_PERF_COUNTERS is not set +# CONFIG_DEBUG_PERF_USE_VMALLOC is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y -CONFIG_MARKERS=y CONFIG_OPROFILE=m CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y @@ -161,12 +165,14 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling # # CONFIG_GCOV_KERNEL is not set -# CONFIG_SLOW_WORK is not set +CONFIG_SLOW_WORK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -275,12 +281,12 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y # CONFIG_IOMMU_HELPER is not set # CONFIG_SWIOTLB is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -298,6 +304,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -309,6 +316,7 @@ CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_EXTRA_TARGETS="" CONFIG_PM=y # CONFIG_PM_DEBUG is not set +# CONFIG_PM_RUNTIME is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -674,10 +682,12 @@ CONFIG_BT_HCIBCM203X=m # CONFIG_BT_HCIBPA10X is not set CONFIG_BT_HCIBFUSB=m CONFIG_BT_HCIVHCI=m +# CONFIG_BT_MRVL is not set # CONFIG_AF_RXRPC is not set CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y @@ -686,7 +696,6 @@ CONFIG_WIRELESS_EXT_SYSFS=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -699,6 +708,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -710,9 +720,9 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set CONFIG_MTD_CONCAT=m CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set CONFIG_MTD_OF_PARTS=y @@ -763,6 +773,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y # CONFIG_MTD_PHYSMAP is not set CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_PCI is not set +# CONFIG_MTD_GPIO_ADDR is not set # CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set @@ -857,6 +868,7 @@ CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set CONFIG_BLK_DEV_3W_XXXX_RAID=m CONFIG_SCSI_3W_9XXX=m CONFIG_SCSI_ACARD=m @@ -912,7 +924,9 @@ CONFIG_SCSI_LPFC=m # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set @@ -982,7 +996,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -1010,10 +1026,7 @@ CONFIG_MV643XX_ETH=y # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -1145,6 +1158,7 @@ CONFIG_MAX_RAW_DEVS=8192 CONFIG_DEVPORT=y CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=m CONFIG_I2C_HELPER_AUTO=y @@ -1200,9 +1214,6 @@ CONFIG_I2C_MV64XXX=m # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -CONFIG_SENSORS_PCF8574=m -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1220,6 +1231,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=m CONFIG_HWMON_VID=m +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set CONFIG_SENSORS_ADM1021=m @@ -1269,6 +1285,7 @@ CONFIG_SENSORS_SMSC47B397=m # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set CONFIG_SENSORS_VIA686A=m # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1280,7 +1297,6 @@ CONFIG_SENSORS_W83L785TS=m # CONFIG_SENSORS_W83L786NG is not set CONFIG_SENSORS_W83627HF=m # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1317,6 +1333,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1327,6 +1344,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -1378,6 +1396,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=m CONFIG_USB_OHCI_HCD_PPC_OF_BE=y # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set @@ -1588,6 +1607,7 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1668,7 +1688,6 @@ CONFIG_VXFS_FS=m # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1770,7 +1789,7 @@ CONFIG_BINARY_PRINTF=y CONFIG_BITREVERSE=y CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set +CONFIG_CRC16=m CONFIG_CRC_T10DIF=m CONFIG_CRC_ITU_T=m CONFIG_CRC32=y @@ -1797,6 +1816,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1814,6 +1834,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set CONFIG_DEBUG_SPINLOCK=y @@ -1834,11 +1855,13 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set @@ -1852,6 +1875,7 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_RING_BUFFER=y CONFIG_EVENT_TRACING=y CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_RING_BUFFER_ALLOW_SWAP=y CONFIG_TRACING=y CONFIG_TRACING_SUPPORT=y CONFIG_FTRACE=y @@ -1869,6 +1893,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_RING_BUFFER_BENCHMARK is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1899,6 +1924,7 @@ CONFIG_SECURITY_NETWORK=y # CONFIG_SECURITY_NETWORK_XFRM is not set # CONFIG_SECURITY_PATH is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_LSM_MMAP_MIN_ADDR=65536 CONFIG_SECURITY_SELINUX=y CONFIG_SECURITY_SELINUX_BOOTPARAM=y CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1 @@ -1913,7 +1939,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=m @@ -1956,11 +1981,13 @@ CONFIG_CRYPTO_ECB=m # CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_GHASH is not set CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig index 0aa5b43..ef5edc7 100644 --- a/arch/powerpc/configs/ep8248e_defconfig +++ b/arch/powerpc/configs/ep8248e_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:31:49 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:06 2009 # # CONFIG_PPC64 is not set @@ -34,6 +34,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -82,11 +83,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -116,28 +118,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -150,6 +153,7 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y CONFIG_LBDAF=y +CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set # @@ -233,6 +237,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_FLATMEM=y @@ -246,6 +251,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -394,6 +400,7 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_BT is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -401,7 +408,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -413,6 +419,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -600,7 +607,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set CONFIG_FS_ENET_HAS_FCC=y @@ -648,10 +657,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -736,15 +742,19 @@ CONFIG_GPIOLIB=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -767,6 +777,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -968,6 +979,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -998,10 +1010,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1024,6 +1038,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1052,7 +1067,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1094,6 +1108,7 @@ CONFIG_CRYPTO_PCBC=y # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig index 2c292e2..73ef9be 100644 --- a/arch/powerpc/configs/ep88xc_defconfig +++ b/arch/powerpc/configs/ep88xc_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:31:49 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:07 2009 # # CONFIG_PPC64 is not set @@ -16,6 +16,7 @@ CONFIG_PPC_8xx=y # CONFIG_E200 is not set CONFIG_8xx=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -29,6 +30,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -77,11 +79,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -115,28 +118,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -234,10 +238,10 @@ CONFIG_BINFMT_ELF=y CONFIG_8XX_MINIMAL_FPEMU=y # CONFIG_IOMMU_HELPER is not set # CONFIG_SWIOTLB is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -255,6 +259,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -337,6 +342,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -366,6 +372,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -373,7 +380,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -386,6 +392,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -529,16 +536,15 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set CONFIG_FS_ENET_HAS_FEC=y CONFIG_FS_ENET_MDIO_FEC=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -611,7 +617,6 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -672,6 +677,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set @@ -731,7 +737,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -803,6 +808,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -820,6 +826,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_LOCK_ALLOC is not set @@ -836,10 +843,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -861,10 +870,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig index 45671e7..63c3e8d 100644 --- a/arch/powerpc/configs/linkstation_defconfig +++ b/arch/powerpc/configs/linkstation_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:31:50 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:08 2009 # # CONFIG_PPC64 is not set @@ -34,6 +34,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -83,11 +84,12 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -131,22 +133,21 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_COMPAT_BRK is not set # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -154,11 +155,13 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling # -# CONFIG_SLOW_WORK is not set +CONFIG_SLOW_WORK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -258,6 +261,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -275,6 +279,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -482,6 +487,7 @@ CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -511,6 +517,7 @@ CONFIG_IP_NF_ARP_MANGLE=m # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y @@ -519,7 +526,6 @@ CONFIG_WIRELESS_EXT_SYSFS=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -532,6 +538,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -543,9 +550,9 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -711,6 +718,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -750,11 +758,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set @@ -777,6 +788,7 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -804,6 +816,7 @@ CONFIG_PATA_IT821X=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -870,7 +883,9 @@ CONFIG_TULIP_MMIO=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -918,10 +933,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -1043,6 +1055,7 @@ CONFIG_HW_RANDOM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -1097,9 +1110,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1117,6 +1127,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -1166,6 +1181,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1177,9 +1193,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1198,6 +1212,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1208,6 +1223,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1227,7 +1243,6 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=m -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1271,6 +1286,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set @@ -1500,6 +1516,7 @@ CONFIG_XFS_FS=m # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1567,7 +1584,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1681,6 +1697,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1698,6 +1715,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1716,10 +1734,12 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1742,6 +1762,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1771,7 +1792,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1813,11 +1833,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_GHASH is not set CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m diff --git a/arch/powerpc/configs/mgcoge_defconfig b/arch/powerpc/configs/mgcoge_defconfig index 30b68bf..520b04a 100644 --- a/arch/powerpc/configs/mgcoge_defconfig +++ b/arch/powerpc/configs/mgcoge_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc5 -# Fri Aug 7 08:19:15 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:09 2009 # # CONFIG_PPC64 is not set @@ -34,6 +34,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +85,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -123,28 +125,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -247,6 +250,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_FLATMEM=y @@ -260,6 +264,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -390,6 +395,7 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_BT is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -397,7 +403,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -409,6 +414,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -608,7 +614,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_FS_ENET=y CONFIG_FS_ENET_HAS_SCC=y CONFIG_FS_ENET_HAS_FCC=y @@ -616,10 +624,7 @@ CONFIG_FS_ENET_MDIO_FCC=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -685,6 +690,7 @@ CONFIG_HW_RANDOM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -740,7 +746,6 @@ CONFIG_I2C_CPM=y # # Miscellaneous I2C Chip support # -# CONFIG_PCF8575 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -771,15 +776,19 @@ CONFIG_GPIOLIB=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -799,6 +808,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -809,6 +819,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -1022,6 +1033,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1052,10 +1064,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1079,6 +1093,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1109,7 +1124,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1151,6 +1165,7 @@ CONFIG_CRYPTO_PCBC=y # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/mgsuvd_defconfig b/arch/powerpc/configs/mgsuvd_defconfig index 1ae85a3..43c3c4f 100644 --- a/arch/powerpc/configs/mgsuvd_defconfig +++ b/arch/powerpc/configs/mgsuvd_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:31:52 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:10 2009 # # CONFIG_PPC64 is not set @@ -16,6 +16,7 @@ CONFIG_PPC_8xx=y # CONFIG_E200 is not set CONFIG_8xx=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -29,6 +30,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -76,11 +78,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 CONFIG_GROUP_SCHED=y @@ -117,27 +120,28 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set # CONFIG_VM_EVENT_COUNTERS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -237,10 +241,10 @@ CONFIG_BINFMT_ELF=y CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set # CONFIG_SWIOTLB is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -258,6 +262,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -344,6 +349,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -373,6 +379,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -380,7 +387,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -553,16 +559,15 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_FS_ENET=y CONFIG_FS_ENET_HAS_SCC=y # CONFIG_FS_ENET_HAS_FEC is not set # CONFIG_FS_ENET_MDIO_FEC is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -635,7 +640,6 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -707,6 +711,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -776,7 +781,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -851,6 +855,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -865,6 +870,7 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -887,7 +893,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -918,11 +923,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig index f23428c..d8b364a 100644 --- a/arch/powerpc/configs/mpc7448_hpc2_defconfig +++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:31:53 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:10 2009 # # CONFIG_PPC64 is not set @@ -34,6 +34,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -82,11 +83,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -123,28 +125,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -241,6 +244,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -258,6 +262,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -350,6 +355,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -379,6 +385,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -386,7 +393,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -399,6 +405,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -478,6 +485,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -517,11 +525,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set @@ -543,6 +554,7 @@ CONFIG_SATA_MV=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -570,6 +582,7 @@ CONFIG_SATA_MV=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -666,9 +679,11 @@ CONFIG_8139TOO=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -715,10 +730,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -822,6 +834,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set @@ -836,9 +853,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -861,6 +876,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -874,7 +890,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -939,6 +954,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -997,7 +1013,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -1069,6 +1084,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1086,6 +1102,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1107,7 +1124,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1138,11 +1154,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig index 02716f7..00fad81 100644 --- a/arch/powerpc/configs/mpc8272_ads_defconfig +++ b/arch/powerpc/configs/mpc8272_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:31:54 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:11 2009 # # CONFIG_PPC64 is not set @@ -34,6 +34,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -82,11 +83,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -116,29 +118,30 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -151,6 +154,7 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y CONFIG_LBDAF=y +CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set # @@ -236,6 +240,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_FLATMEM=y @@ -249,6 +254,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -397,6 +403,7 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_BT is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -404,7 +411,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -416,6 +422,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -477,7 +484,6 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_COMPLEX_MAPPINGS is not set # CONFIG_MTD_PHYSMAP is not set CONFIG_MTD_PHYSMAP_OF=y -# CONFIG_MTD_SBC8240 is not set # CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set @@ -604,7 +610,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set CONFIG_FS_ENET_HAS_FCC=y @@ -652,10 +660,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -704,6 +709,7 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_GPIO is not set # CONFIG_KEYBOARD_MATRIX is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_XTKBD is not set @@ -714,6 +720,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_VSXXXAA is not set @@ -793,15 +800,19 @@ CONFIG_GPIOLIB=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -824,6 +835,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -1032,6 +1044,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1067,10 +1080,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1093,6 +1108,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1121,7 +1137,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1163,6 +1178,7 @@ CONFIG_CRYPTO_PCBC=y # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig index d6d28f2..64dff21 100644 --- a/arch/powerpc/configs/mpc83xx_defconfig +++ b/arch/powerpc/configs/mpc83xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:31:55 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:12 2009 # # CONFIG_PPC64 is not set @@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -86,11 +87,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -127,21 +129,20 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -149,6 +150,8 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -263,6 +266,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -280,6 +284,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -378,6 +383,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -407,6 +413,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -414,7 +421,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -427,6 +433,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -434,9 +441,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set CONFIG_MTD_OF_PARTS=y @@ -609,6 +616,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -648,11 +656,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set @@ -675,6 +686,7 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -702,6 +714,7 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -778,7 +791,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -801,7 +816,6 @@ CONFIG_NETDEV_1000=y CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y CONFIG_UCC_GETH=y -# CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set # CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set @@ -829,10 +843,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -936,6 +947,7 @@ CONFIG_GEN_RTC=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -991,9 +1003,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1026,14 +1035,24 @@ CONFIG_GPIOLIB=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -1084,6 +1103,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1095,9 +1115,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1136,6 +1154,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1146,6 +1165,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1159,7 +1179,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1182,6 +1201,7 @@ CONFIG_HID_CYPRESS=y CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_TWINHAN is not set # CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set @@ -1234,6 +1254,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_FHCI_HCD is not set @@ -1292,6 +1313,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set @@ -1339,6 +1361,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1398,7 +1421,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1515,6 +1537,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1530,6 +1553,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1551,7 +1575,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=y @@ -1594,11 +1617,13 @@ CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index 70851ee..a12e7ba 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:31:55 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:25:20 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set @@ -36,6 +37,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -88,11 +90,12 @@ CONFIG_AUDIT=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -131,22 +134,21 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -154,7 +156,9 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -189,6 +193,7 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_FREEZER is not set +CONFIG_PPC_MSI_BITMAP=y # # Platform support @@ -206,7 +211,7 @@ CONFIG_MPC85xx_DS=y CONFIG_MPC85xx_RDB=y CONFIG_SOCRATES=y CONFIG_KSI8560=y -# CONFIG_XES_MPC85xx is not set +CONFIG_XES_MPC85xx=y CONFIG_STX_GP3=y CONFIG_TQM8540=y CONFIG_TQM8541=y @@ -259,10 +264,10 @@ CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y CONFIG_IOMMU_HELPER=y CONFIG_SWIOTLB=y -CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -280,6 +285,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -307,7 +313,7 @@ CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y -# CONFIG_PCI_MSI is not set +CONFIG_PCI_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set @@ -315,7 +321,8 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set CONFIG_HAS_RAPIDIO=y -# CONFIG_RAPIDIO is not set +CONFIG_RAPIDIO=y +CONFIG_RAPIDIO_DISC_TIMEOUT=30 # # Advanced setup @@ -411,6 +418,7 @@ CONFIG_IP_SCTP=m # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -441,6 +449,7 @@ CONFIG_SCTP_HMAC_MD5=y CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -448,7 +457,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -461,6 +469,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -554,6 +563,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -593,11 +603,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y # CONFIG_SATA_SIL24 is not set @@ -620,6 +633,7 @@ CONFIG_ATA_SFF=y CONFIG_PATA_ALI=y # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -647,6 +661,7 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -723,7 +738,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_FS_ENET=y CONFIG_FS_ENET_HAS_SCC=y CONFIG_FS_ENET_HAS_FCC=y @@ -750,7 +767,6 @@ CONFIG_NETDEV_1000=y CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y CONFIG_UCC_GETH=y -# CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set # CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set @@ -778,10 +794,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -798,6 +811,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set +# CONFIG_RIONET is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set @@ -898,6 +912,7 @@ CONFIG_NVRAM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y # CONFIG_I2C_CHARDEV is not set CONFIG_I2C_HELPER_AUTO=y @@ -955,9 +970,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -991,15 +1003,19 @@ CONFIG_GPIOLIB=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1020,6 +1036,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1030,6 +1047,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -1049,6 +1067,7 @@ CONFIG_VGA_CONSOLE=y CONFIG_DUMMY_CONSOLE=y CONFIG_SOUND=y CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -1152,7 +1171,6 @@ CONFIG_SND_USB=y CONFIG_AC97_BUS=y CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1175,6 +1193,7 @@ CONFIG_HID_CYPRESS=y CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_TWINHAN is not set # CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set @@ -1227,6 +1246,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y CONFIG_USB_OHCI_HCD_PPC_OF_LE=y @@ -1241,7 +1261,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_WHCI_HCD is not set # CONFIG_USB_HWA_HCD is not set -# CONFIG_USB_MUSB_HDRC is not set # # USB Device Class drivers @@ -1429,6 +1448,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1499,7 +1519,6 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1620,6 +1639,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1637,6 +1657,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1656,10 +1677,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1683,10 +1706,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1714,7 +1737,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=y @@ -1757,11 +1779,13 @@ CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig index ab45fd9..cd70b4a 100644 --- a/arch/powerpc/configs/mpc85xx_smp_defconfig +++ b/arch/powerpc/configs/mpc85xx_smp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:31:56 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:26:01 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set CONFIG_SMP=y @@ -37,6 +38,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -89,11 +91,12 @@ CONFIG_AUDIT=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -132,22 +135,21 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -155,8 +157,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -192,6 +196,7 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_FREEZER is not set +CONFIG_PPC_MSI_BITMAP=y # # Platform support @@ -206,9 +211,10 @@ CONFIG_MPC85xx_CDS=y CONFIG_MPC85xx_MDS=y CONFIG_MPC8536_DS=y CONFIG_MPC85xx_DS=y +CONFIG_MPC85xx_RDB=y CONFIG_SOCRATES=y CONFIG_KSI8560=y -# CONFIG_XES_MPC85xx is not set +CONFIG_XES_MPC85xx=y CONFIG_STX_GP3=y CONFIG_TQM8540=y CONFIG_TQM8541=y @@ -261,11 +267,11 @@ CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y CONFIG_IOMMU_HELPER=y CONFIG_SWIOTLB=y -CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_IRQ_ALL_CPUS is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -283,6 +289,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -310,7 +317,7 @@ CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y -# CONFIG_PCI_MSI is not set +CONFIG_PCI_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set @@ -318,7 +325,8 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set CONFIG_HAS_RAPIDIO=y -# CONFIG_RAPIDIO is not set +CONFIG_RAPIDIO=y +CONFIG_RAPIDIO_DISC_TIMEOUT=30 # # Advanced setup @@ -414,6 +422,7 @@ CONFIG_IP_SCTP=m # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -444,6 +453,7 @@ CONFIG_SCTP_HMAC_MD5=y CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -451,7 +461,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -464,6 +473,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -557,6 +567,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -596,11 +607,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y # CONFIG_SATA_SIL24 is not set @@ -623,6 +637,7 @@ CONFIG_ATA_SFF=y CONFIG_PATA_ALI=y # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -650,6 +665,7 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -726,7 +742,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_FS_ENET=y CONFIG_FS_ENET_HAS_SCC=y CONFIG_FS_ENET_HAS_FCC=y @@ -753,7 +771,6 @@ CONFIG_NETDEV_1000=y CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y CONFIG_UCC_GETH=y -# CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set # CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set @@ -781,10 +798,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -801,6 +815,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set +# CONFIG_RIONET is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set @@ -901,6 +916,7 @@ CONFIG_NVRAM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y # CONFIG_I2C_CHARDEV is not set CONFIG_I2C_HELPER_AUTO=y @@ -958,9 +974,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -994,15 +1007,19 @@ CONFIG_GPIOLIB=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1023,6 +1040,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1033,6 +1051,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -1052,6 +1071,7 @@ CONFIG_VGA_CONSOLE=y CONFIG_DUMMY_CONSOLE=y CONFIG_SOUND=y CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -1155,7 +1175,6 @@ CONFIG_SND_USB=y CONFIG_AC97_BUS=y CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1178,6 +1197,7 @@ CONFIG_HID_CYPRESS=y CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_TWINHAN is not set # CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set @@ -1230,6 +1250,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y CONFIG_USB_OHCI_HCD_PPC_OF_LE=y @@ -1244,7 +1265,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_WHCI_HCD is not set # CONFIG_USB_HWA_HCD is not set -# CONFIG_USB_MUSB_HDRC is not set # # USB Device Class drivers @@ -1432,6 +1452,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1502,7 +1523,6 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1623,6 +1643,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1640,6 +1661,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1659,10 +1681,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1686,10 +1710,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1717,7 +1741,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=y @@ -1760,11 +1783,13 @@ CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/mpc866_ads_defconfig b/arch/powerpc/configs/mpc866_ads_defconfig index 6809b61..40d6f05 100644 --- a/arch/powerpc/configs/mpc866_ads_defconfig +++ b/arch/powerpc/configs/mpc866_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:31:57 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:15 2009 # # CONFIG_PPC64 is not set @@ -16,6 +16,7 @@ CONFIG_PPC_8xx=y # CONFIG_E200 is not set CONFIG_8xx=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -29,6 +30,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -76,11 +78,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -113,28 +116,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -233,10 +237,10 @@ CONFIG_BINFMT_ELF=y CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set # CONFIG_SWIOTLB is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -254,6 +258,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -340,6 +345,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -369,6 +375,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -376,7 +383,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -467,6 +473,8 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_FS_ENET=y CONFIG_FS_ENET_HAS_SCC=y CONFIG_FS_ENET_HAS_FEC=y @@ -476,10 +484,7 @@ CONFIG_NETDEV_1000=y # CONFIG_GIANFAR is not set # CONFIG_MV643XX_ETH is not set CONFIG_NETDEV_10000=y - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -520,6 +525,7 @@ CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_XTKBD is not set @@ -530,6 +536,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_VSXXXAA is not set @@ -595,6 +602,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_IT87 is not set @@ -605,9 +617,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -641,7 +651,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -705,6 +714,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -763,7 +773,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -836,6 +845,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -851,6 +861,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -871,7 +882,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -902,11 +912,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/mpc86xx_defconfig b/arch/powerpc/configs/mpc86xx_defconfig index 0e8684a..5b3abb4 100644 --- a/arch/powerpc/configs/mpc86xx_defconfig +++ b/arch/powerpc/configs/mpc86xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:31:58 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:16 2009 # # CONFIG_PPC64 is not set @@ -36,6 +36,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -88,11 +89,12 @@ CONFIG_AUDIT=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -131,22 +133,21 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -154,7 +155,9 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -253,13 +256,13 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m CONFIG_IOMMU_HELPER=y CONFIG_SWIOTLB=y -CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set # CONFIG_IRQ_ALL_CPUS is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -277,6 +280,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -406,6 +410,7 @@ CONFIG_IP_SCTP=m # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -436,6 +441,7 @@ CONFIG_SCTP_HMAC_MD5=y CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -443,7 +449,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -456,6 +461,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -549,6 +555,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -588,11 +595,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y # CONFIG_SATA_SIL24 is not set @@ -615,6 +625,7 @@ CONFIG_ATA_SFF=y CONFIG_PATA_ALI=y # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -642,6 +653,7 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -718,7 +730,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -766,10 +780,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -883,6 +894,7 @@ CONFIG_NVRAM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y # CONFIG_I2C_CHARDEV is not set CONFIG_I2C_HELPER_AUTO=y @@ -938,9 +950,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -974,15 +983,19 @@ CONFIG_GPIOLIB=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1003,6 +1016,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1013,6 +1027,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -1032,6 +1047,7 @@ CONFIG_VGA_CONSOLE=y CONFIG_DUMMY_CONSOLE=y CONFIG_SOUND=y CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -1135,7 +1151,6 @@ CONFIG_SND_USB=y CONFIG_AC97_BUS=y CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1158,6 +1173,7 @@ CONFIG_HID_CYPRESS=y CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_TWINHAN is not set # CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set @@ -1210,6 +1226,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y CONFIG_USB_OHCI_HCD_PPC_OF_LE=y @@ -1389,6 +1406,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1459,7 +1477,6 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1577,6 +1594,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1594,6 +1612,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1613,10 +1632,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1639,10 +1660,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1669,7 +1690,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1711,11 +1731,13 @@ CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig index dbe8e869..1da3488 100644 --- a/arch/powerpc/configs/mpc885_ads_defconfig +++ b/arch/powerpc/configs/mpc885_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:31:59 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:17 2009 # # CONFIG_PPC64 is not set @@ -16,6 +16,7 @@ CONFIG_PPC_8xx=y # CONFIG_E200 is not set CONFIG_8xx=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -29,6 +30,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -77,11 +79,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -115,28 +118,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -241,10 +245,10 @@ CONFIG_BINFMT_ELF=y CONFIG_8XX_MINIMAL_FPEMU=y # CONFIG_IOMMU_HELPER is not set # CONFIG_SWIOTLB is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -262,6 +266,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -344,6 +349,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -373,6 +379,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -380,7 +387,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -393,6 +399,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -540,16 +547,15 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set CONFIG_FS_ENET_HAS_FEC=y CONFIG_FS_ENET_MDIO_FEC=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -622,7 +628,6 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -683,6 +688,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set @@ -742,7 +748,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -814,6 +819,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -831,6 +837,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_LOCK_ALLOC is not set @@ -847,10 +854,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -872,10 +881,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig index ff96bb4..b791121 100644 --- a/arch/powerpc/configs/pq2fads_defconfig +++ b/arch/powerpc/configs/pq2fads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:00 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:17 2009 # # CONFIG_PPC64 is not set @@ -34,6 +34,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -82,11 +83,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -120,29 +122,30 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -155,6 +158,7 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y CONFIG_LBDAF=y +CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set # @@ -239,6 +243,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_FLATMEM=y @@ -252,6 +257,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -401,6 +407,7 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_BT is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -408,7 +415,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -420,6 +426,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -481,7 +488,6 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_COMPLEX_MAPPINGS is not set # CONFIG_MTD_PHYSMAP is not set CONFIG_MTD_PHYSMAP_OF=y -# CONFIG_MTD_SBC8240 is not set # CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set @@ -664,7 +670,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set CONFIG_FS_ENET_HAS_FCC=y @@ -712,10 +720,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -764,6 +769,7 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_GPIO is not set # CONFIG_KEYBOARD_MATRIX is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_XTKBD is not set @@ -774,6 +780,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set @@ -855,15 +862,19 @@ CONFIG_GPIOLIB=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -886,6 +897,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -905,7 +917,6 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set -# CONFIG_USB_MUSB_HDRC is not set # CONFIG_USB_GADGET_MUSB_HDRC is not set # @@ -922,6 +933,7 @@ CONFIG_USB_GADGET_SELECTED=y # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set # CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_R8A66597 is not set # CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_S3C_HSOTG is not set # CONFIG_USB_GADGET_IMX is not set @@ -940,6 +952,7 @@ CONFIG_USB_GADGET_DUALSPEED=y # CONFIG_USB_AUDIO is not set CONFIG_USB_ETH=y CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_ETH_EEM is not set # CONFIG_USB_GADGETFS is not set # CONFIG_USB_FILE_STORAGE is not set # CONFIG_USB_G_SERIAL is not set @@ -1148,6 +1161,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1183,10 +1197,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1209,6 +1225,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1237,7 +1254,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1279,6 +1295,7 @@ CONFIG_CRYPTO_PCBC=y # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig index 1293c46..ef50ce4 100644 --- a/arch/powerpc/configs/prpmc2800_defconfig +++ b/arch/powerpc/configs/prpmc2800_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:01 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:18 2009 # # CONFIG_PPC64 is not set @@ -36,6 +36,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -85,11 +86,12 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -131,28 +133,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -244,12 +247,12 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y # CONFIG_IOMMU_HELPER is not set # CONFIG_SWIOTLB is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -267,6 +270,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -360,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -389,6 +394,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -396,7 +402,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -409,6 +414,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -633,6 +639,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -672,11 +679,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set @@ -698,6 +708,7 @@ CONFIG_SATA_MV=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -725,6 +736,7 @@ CONFIG_SATA_MV=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -823,9 +835,11 @@ CONFIG_8139TOO=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -871,10 +885,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -977,6 +988,7 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -1031,9 +1043,6 @@ CONFIG_I2C_MV64XXX=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1051,6 +1060,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -1100,6 +1114,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1111,9 +1126,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1132,6 +1145,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1142,6 +1156,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -1162,7 +1177,6 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1186,6 +1200,7 @@ CONFIG_HID_DRAGONRISE=y CONFIG_HID_EZKEY=y CONFIG_HID_KYE=y CONFIG_HID_GYRATION=y +CONFIG_HID_TWINHAN=y CONFIG_HID_KENSINGTON=y CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set @@ -1239,6 +1254,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set @@ -1404,6 +1420,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1463,7 +1480,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -1576,6 +1592,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1593,6 +1610,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1614,7 +1632,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1645,11 +1662,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig index 28384dc..5242631 100644 --- a/arch/powerpc/configs/storcenter_defconfig +++ b/arch/powerpc/configs/storcenter_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:01 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:19 2009 # # CONFIG_PPC64 is not set @@ -34,6 +34,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -82,11 +83,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -118,28 +120,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -243,6 +246,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -260,6 +264,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -349,6 +354,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -378,6 +384,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -385,7 +392,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -398,6 +404,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -405,9 +412,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -619,6 +626,7 @@ CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -657,7 +665,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set @@ -670,6 +680,7 @@ CONFIG_MD_RAID1=y # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=y CONFIG_MD_RAID6_PQ=y +# CONFIG_ASYNC_RAID6_TEST is not set # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set # CONFIG_BLK_DEV_DM is not set @@ -729,10 +740,7 @@ CONFIG_R8169=y # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -813,6 +821,7 @@ CONFIG_NVRAM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -867,9 +876,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -887,7 +893,6 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -906,6 +911,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -916,6 +922,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -961,6 +968,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set @@ -1141,6 +1149,7 @@ CONFIG_XFS_FS=m # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1210,7 +1219,6 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set # CONFIG_NETWORK_FILESYSTEMS is not set CONFIG_EXPORTFS=m @@ -1307,6 +1315,7 @@ CONFIG_GENERIC_ATOMIC64=y # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1324,6 +1333,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1344,6 +1354,8 @@ CONFIG_XOR_BLOCKS=y CONFIG_ASYNC_CORE=y CONFIG_ASYNC_MEMCPY=y CONFIG_ASYNC_XOR=y +CONFIG_ASYNC_PQ=y +CONFIG_ASYNC_RAID6_RECOV=y # CONFIG_CRYPTO is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set -- cgit v0.10.2 From 22aecebfd9498c4779e5c5bed1d2d054bd99f7a4 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Wed, 21 Oct 2009 18:01:37 -0700 Subject: acpi-power-meter: Don't leak ACPI error codes to userspace If the ACPI methods return an error code, we must return -EINVAL to userspace to flag the error. Right now we pass the (positive) number right through, which causes echo to keep writing bogus values. Signed-off-by: Darrick J. Wong Acked-by: Jean Delvare Signed-off-by: Andrew Morton Signed-off-by: Len Brown diff --git a/drivers/acpi/power_meter.c b/drivers/acpi/power_meter.c index e6bfd77..2ef7030 100644 --- a/drivers/acpi/power_meter.c +++ b/drivers/acpi/power_meter.c @@ -294,7 +294,11 @@ static int set_acpi_trip(struct acpi_power_meter_resource *resource) return -EINVAL; } - return data; + /* _PTP returns 0 on success, nonzero otherwise */ + if (data) + return -EINVAL; + + return 0; } static ssize_t set_trip(struct device *dev, struct device_attribute *devattr, -- cgit v0.10.2 From 78987bdc4e41a425ac113c2c51474f0368fe653a Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 5 Nov 2009 09:22:30 -0800 Subject: ALSA: hda, move hp_bseries_system Function hp_bseries_system() is always used, outside of CONFIG_ boundaries/controls, so move it. sound/pci/hda/patch_sigmatel.c:5458: error: implicit declaration of function 'hp_bseries_system' Signed-off-by: Randy Dunlap Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index b513eba..8eb6508 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -4668,6 +4668,26 @@ static void stac92xx_unsol_event(struct hda_codec *codec, unsigned int res) } } +static int hp_bseries_system(u32 subsystem_id) +{ + switch (subsystem_id) { + case 0x103c307e: + case 0x103c307f: + case 0x103c3080: + case 0x103c3081: + case 0x103c1722: + case 0x103c1723: + case 0x103c1724: + case 0x103c1725: + case 0x103c1726: + case 0x103c1727: + case 0x103c1728: + case 0x103c1729: + return 1; + } + return 0; +} + #ifdef CONFIG_PROC_FS static void stac92hd_proc_hook(struct snd_info_buffer *buffer, struct hda_codec *codec, hda_nid_t nid) @@ -4733,26 +4753,6 @@ static int stac92xx_resume(struct hda_codec *codec) return 0; } -static int hp_bseries_system(u32 subsystem_id) -{ - switch (subsystem_id) { - case 0x103c307e: - case 0x103c307f: - case 0x103c3080: - case 0x103c3081: - case 0x103c1722: - case 0x103c1723: - case 0x103c1724: - case 0x103c1725: - case 0x103c1726: - case 0x103c1727: - case 0x103c1728: - case 0x103c1729: - return 1; - } - return 0; -} - /* * using power check for controlling mute led of HP notebooks * check for mute state only on Speakers (nid = 0x10) -- cgit v0.10.2 From d39b7dd1dcbf394a1cb897457c862dafe9a20ac5 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 5 Nov 2009 10:48:30 -0800 Subject: sgi-gru: decrapfiy options_write() function Not a single line of actual code in the function was really fundamentally correct. Problems ranged from lack of proper range checking, to removing the last character written (which admittedly is usually '\n'), to not accepting hex numbers even though the 'show' routine would show the data in that format. This tries to do better. Acked-by: Michael Buesch Tested-and-acked-by: Jack Steiner Cc: stable@kernel.org Cc: Jiri Kosina Cc: Michael Gilbert Signed-off-by: Linus Torvalds diff --git a/drivers/misc/sgi-gru/gruprocfs.c b/drivers/misc/sgi-gru/gruprocfs.c index ccd4408..3f2375c 100644 --- a/drivers/misc/sgi-gru/gruprocfs.c +++ b/drivers/misc/sgi-gru/gruprocfs.c @@ -161,14 +161,15 @@ static int options_show(struct seq_file *s, void *p) static ssize_t options_write(struct file *file, const char __user *userbuf, size_t count, loff_t *data) { - unsigned long val; - char buf[80]; + char buf[20]; - if (strncpy_from_user(buf, userbuf, sizeof(buf) - 1) < 0) + if (count >= sizeof(buf)) + return -EINVAL; + if (copy_from_user(buf, userbuf, count)) return -EFAULT; - buf[count - 1] = '\0'; - if (!strict_strtoul(buf, 10, &val)) - gru_options = val; + buf[count] = '\0'; + if (strict_strtoul(buf, 0, &gru_options)) + return -EINVAL; return count; } -- cgit v0.10.2 From d525753bf30fe29a2897273e180fc24723350dcc Mon Sep 17 00:00:00 2001 From: Jean-Christop PLAGNIOL-VILLARD Date: Mon, 2 Nov 2009 20:13:32 +0100 Subject: ARM: 5779/1: ep93xx/micro9.c: fix implicit declaration of function __raw_readl and IOMEM Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: H Hartley Sweeten Signed-off-by: Russell King diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c index d83b804..f3757a1 100644 --- a/arch/arm/mach-ep93xx/micro9.c +++ b/arch/arm/mach-ep93xx/micro9.c @@ -15,6 +15,7 @@ #include #include #include +#include #include -- cgit v0.10.2 From c742239866250a5690485ab775b942c85c6bee63 Mon Sep 17 00:00:00 2001 From: zeal Date: Tue, 3 Nov 2009 02:36:55 +0100 Subject: ARM: 5780/1: KS8695: Fix macro definition bug in regs-switch.c NOTE: 1. Macro style is so strange. 2. The value 0xc0 is not match with KS8695 manual. It should be 0x0c. Signed-off-by: zeal Acked-by: Andrew Victor Signed-off-by: Russell King diff --git a/arch/arm/mach-ks8695/include/mach/regs-switch.h b/arch/arm/mach-ks8695/include/mach/regs-switch.h index 56d12e8..97e8acb 100644 --- a/arch/arm/mach-ks8695/include/mach/regs-switch.h +++ b/arch/arm/mach-ks8695/include/mach/regs-switch.h @@ -25,7 +25,7 @@ #define KS8695_SEC1 (0x04) /* Switch Engine Control 1 */ #define KS8695_SEC2 (0x08) /* Switch Engine Control 2 */ -#define KS8695_P(x)_C(z) (0xc0 + (((x)-1)*3 + ((z)-1))*4) /* Port Configuration Registers */ +#define KS8695_SEPXCZ(x,z) (0x0c + (((x)-1)*3 + ((z)-1))*4) /* Port Configuration Registers */ #define KS8695_SEP12AN (0x48) /* Port 1 & 2 Auto-Negotiation */ #define KS8695_SEP34AN (0x4c) /* Port 3 & 4 Auto-Negotiation */ -- cgit v0.10.2 From 2c75910f1aa042be1dd769378d2611bf551721ac Mon Sep 17 00:00:00 2001 From: Chris Lalancette Date: Thu, 5 Nov 2009 11:47:08 +0100 Subject: x86: Make sure get_user_desc() doesn't sign extend. The current implementation of get_user_desc() sign extends the return value because of integer promotion rules. For the most part, this doesn't matter, because the top bit of base2 is usually 0. If, however, that bit is 1, then the entire value will be 0xffff... which is probably not what the caller intended. This patch casts the entire thing to unsigned before returning, which generates almost the same assembly as the current code but replaces the final "cltq" (sign extend) with a "mov %eax %eax" (zero-extend). This fixes booting certain guests under KVM. Signed-off-by: Chris Lalancette Signed-off-by: Linus Torvalds diff --git a/arch/x86/include/asm/desc.h b/arch/x86/include/asm/desc.h index e8de2f6..617bd56 100644 --- a/arch/x86/include/asm/desc.h +++ b/arch/x86/include/asm/desc.h @@ -288,7 +288,7 @@ static inline void load_LDT(mm_context_t *pc) static inline unsigned long get_desc_base(const struct desc_struct *desc) { - return desc->base0 | ((desc->base1) << 16) | ((desc->base2) << 24); + return (unsigned)(desc->base0 | ((desc->base1) << 16) | ((desc->base2) << 24)); } static inline void set_desc_base(struct desc_struct *desc, unsigned long base) -- cgit v0.10.2 From 941b10fab2cbd90ac7ad6bc2338ffe30e1d3ce53 Mon Sep 17 00:00:00 2001 From: Rakib Mullick Date: Thu, 5 Nov 2009 16:51:40 -0500 Subject: ACPI: add __cpuinit to acpi_processor_add() Annote acpi_processor_add with cpuinit since it calls a cpuinit function acpi_processor_power_init and fixes a section mismatch warning. We were warned by the following warning: LD drivers/acpi/processor.o WARNING: drivers/acpi/processor.o(.text+0x1829): Section mismatch in reference from the function acpi_processor_add() to the function .cpuinit.text:acpi_processor_power_init() The function acpi_processor_add() references the function __cpuinit acpi_processor_power_init(). This is often because acpi_processor_add lacks a __cpuinit annotation or the annotation of acpi_processor_power_init is wrong. Signed-off-by: Rakib Mullick Signed-off-by: Andrew Morton Signed-off-by: Len Brown diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index c567b46..ec742a4 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -770,7 +770,7 @@ static struct notifier_block acpi_cpu_notifier = .notifier_call = acpi_cpu_soft_notify, }; -static int acpi_processor_add(struct acpi_device *device) +static int __cpuinit acpi_processor_add(struct acpi_device *device) { struct acpi_processor *pr = NULL; int result = 0; -- cgit v0.10.2 From d410ee5109a1633a686a5663c6743a92e1181f9b Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Thu, 22 Oct 2009 09:11:11 +0800 Subject: ACPICA: avoid "Info: mapping multiple BARs. Your kernel is fine." Ensure that memory mappings created for operation regions do not cross page boundaries. Crossing a page boundary while mapping regions can cause warnings if the pages have different attributes. Such regions are probably BIOS bugs, and this is the workaround. http://bugzilla.kernel.org/show_bug.cgi?id=14445 [Kernel summit hacking hour] Signed-off-by: Bob Moore Acked-by: Suresh Siddha Signed-off-by: Lin Ming Signed-off-by: Len Brown diff --git a/drivers/acpi/acpica/acconfig.h b/drivers/acpi/acpica/acconfig.h index 8e679ef..a4471e3 100644 --- a/drivers/acpi/acpica/acconfig.h +++ b/drivers/acpi/acpica/acconfig.h @@ -103,9 +103,9 @@ #define ACPI_MAX_REFERENCE_COUNT 0x1000 -/* Size of cached memory mapping for system memory operation region */ +/* Default page size for use in mapping memory for operation regions */ -#define ACPI_SYSMEM_REGION_WINDOW_SIZE 4096 +#define ACPI_DEFAULT_PAGE_SIZE 4096 /* Must be power of 2 */ /* owner_id tracking. 8 entries allows for 255 owner_ids */ diff --git a/drivers/acpi/acpica/exregion.c b/drivers/acpi/acpica/exregion.c index 3a54b73..2bd83ac 100644 --- a/drivers/acpi/acpica/exregion.c +++ b/drivers/acpi/acpica/exregion.c @@ -77,7 +77,8 @@ acpi_ex_system_memory_space_handler(u32 function, void *logical_addr_ptr = NULL; struct acpi_mem_space_context *mem_info = region_context; u32 length; - acpi_size window_size; + acpi_size map_length; + acpi_size page_boundary_map_length; #ifdef ACPI_MISALIGNMENT_NOT_SUPPORTED u32 remainder; #endif @@ -144,25 +145,39 @@ acpi_ex_system_memory_space_handler(u32 function, } /* - * Don't attempt to map memory beyond the end of the region, and - * constrain the maximum mapping size to something reasonable. + * Attempt to map from the requested address to the end of the region. + * However, we will never map more than one page, nor will we cross + * a page boundary. */ - window_size = (acpi_size) + map_length = (acpi_size) ((mem_info->address + mem_info->length) - address); - if (window_size > ACPI_SYSMEM_REGION_WINDOW_SIZE) { - window_size = ACPI_SYSMEM_REGION_WINDOW_SIZE; + /* + * If mapping the entire remaining portion of the region will cross + * a page boundary, just map up to the page boundary, do not cross. + * On some systems, crossing a page boundary while mapping regions + * can cause warnings if the pages have different attributes + * due to resource management + */ + page_boundary_map_length = + ACPI_ROUND_UP(address, ACPI_DEFAULT_PAGE_SIZE) - address; + + if (!page_boundary_map_length) { + page_boundary_map_length = ACPI_DEFAULT_PAGE_SIZE; + } + + if (map_length > page_boundary_map_length) { + map_length = page_boundary_map_length; } /* Create a new mapping starting at the address given */ - mem_info->mapped_logical_address = - acpi_os_map_memory((acpi_physical_address) address, window_size); + mem_info->mapped_logical_address = acpi_os_map_memory((acpi_physical_address) address, map_length); if (!mem_info->mapped_logical_address) { ACPI_ERROR((AE_INFO, "Could not map memory at %8.8X%8.8X, size %X", ACPI_FORMAT_NATIVE_UINT(address), - (u32) window_size)); + (u32) map_length)); mem_info->mapped_length = 0; return_ACPI_STATUS(AE_NO_MEMORY); } @@ -170,7 +185,7 @@ acpi_ex_system_memory_space_handler(u32 function, /* Save the physical address and mapping size */ mem_info->mapped_physical_address = address; - mem_info->mapped_length = window_size; + mem_info->mapped_length = map_length; } /* -- cgit v0.10.2 From 5cfa245b0b63c3d79568e78a1ee3d00654d5517d Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 17 Oct 2009 08:34:39 +0200 Subject: ACPI: Move dereference after NULL test If the NULL test on pr is needed, then the dereference should be after the NULL test. A simplified version of the semantic match that detects this problem is as follows (http://coccinelle.lip6.fr/): // @match exists@ expression x, E; identifier fld; @@ * x->fld ... when != \(x = E\|&x\) * x == NULL // Signed-off-by: Julia Lawall Signed-off-by: Andrew Morton Signed-off-by: Len Brown diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c index 4c6c14c..1c5d7a8 100644 --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -1133,15 +1133,15 @@ int acpi_processor_get_throttling_info(struct acpi_processor *pr) int result = 0; struct acpi_processor_throttling *pthrottling; + if (!pr) + return -EINVAL; + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "pblk_address[0x%08x] duty_offset[%d] duty_width[%d]\n", pr->throttling.address, pr->throttling.duty_offset, pr->throttling.duty_width)); - if (!pr) - return -EINVAL; - /* * Evaluate _PTC, _TSS and _TPC * They must all be present or none of them can be used. -- cgit v0.10.2 From 625120a42bd4371da98808a4ca3e7589083a06d8 Mon Sep 17 00:00:00 2001 From: Amit Kucheria Date: Fri, 16 Oct 2009 12:46:02 +0300 Subject: acpi: thermal: Add EOL to the trip_point_N_type strings Make the trip_point_N_type sysfs files return a string ending in EOL for consistency with other sysfs files. Signed-off-by: Amit Kucheria Acked-by: Zhang Rui Signed-off-by: Andrew Morton Signed-off-by: Len Brown diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index 4e83c29..6f8d8f9 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -180,15 +180,15 @@ trip_point_type_show(struct device *dev, struct device_attribute *attr, switch (type) { case THERMAL_TRIP_CRITICAL: - return sprintf(buf, "critical"); + return sprintf(buf, "critical\n"); case THERMAL_TRIP_HOT: - return sprintf(buf, "hot"); + return sprintf(buf, "hot\n"); case THERMAL_TRIP_PASSIVE: - return sprintf(buf, "passive"); + return sprintf(buf, "passive\n"); case THERMAL_TRIP_ACTIVE: - return sprintf(buf, "active"); + return sprintf(buf, "active\n"); default: - return sprintf(buf, "unknown"); + return sprintf(buf, "unknown\n"); } } -- cgit v0.10.2 From 38bb0849a6799e05bb474a88f198522ae4ecace2 Mon Sep 17 00:00:00 2001 From: Frans Pop Date: Mon, 26 Oct 2009 08:38:59 +0100 Subject: thermal: sysfs-api.txt - reformat for improved readability The document currently uses large indentations which make the text too wide for easy readability. Also improve general consistency. Signed-off-by: Frans Pop Acked-by: Zhang Rui Signed-off-by: Andrew Morton Signed-off-by: Len Brown diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt index 70d68ce..895337f 100644 --- a/Documentation/thermal/sysfs-api.txt +++ b/Documentation/thermal/sysfs-api.txt @@ -1,5 +1,5 @@ Generic Thermal Sysfs driver How To -========================= +=================================== Written by Sujith Thomas , Zhang Rui @@ -10,20 +10,20 @@ Copyright (c) 2008 Intel Corporation 0. Introduction -The generic thermal sysfs provides a set of interfaces for thermal zone devices (sensors) -and thermal cooling devices (fan, processor...) to register with the thermal management -solution and to be a part of it. +The generic thermal sysfs provides a set of interfaces for thermal zone +devices (sensors) and thermal cooling devices (fan, processor...) to register +with the thermal management solution and to be a part of it. -This how-to focuses on enabling new thermal zone and cooling devices to participate -in thermal management. -This solution is platform independent and any type of thermal zone devices and -cooling devices should be able to make use of the infrastructure. +This how-to focuses on enabling new thermal zone and cooling devices to +participate in thermal management. +This solution is platform independent and any type of thermal zone devices +and cooling devices should be able to make use of the infrastructure. -The main task of the thermal sysfs driver is to expose thermal zone attributes as well -as cooling device attributes to the user space. -An intelligent thermal management application can make decisions based on inputs -from thermal zone attributes (the current temperature and trip point temperature) -and throttle appropriate devices. +The main task of the thermal sysfs driver is to expose thermal zone attributes +as well as cooling device attributes to the user space. +An intelligent thermal management application can make decisions based on +inputs from thermal zone attributes (the current temperature and trip point +temperature) and throttle appropriate devices. [0-*] denotes any positive number starting from 0 [1-*] denotes any positive number starting from 1 @@ -31,77 +31,77 @@ and throttle appropriate devices. 1. thermal sysfs driver interface functions 1.1 thermal zone device interface -1.1.1 struct thermal_zone_device *thermal_zone_device_register(char *name, int trips, - void *devdata, struct thermal_zone_device_ops *ops) - - This interface function adds a new thermal zone device (sensor) to - /sys/class/thermal folder as thermal_zone[0-*]. - It tries to bind all the thermal cooling devices registered at the same time. - - name: the thermal zone name. - trips: the total number of trip points this thermal zone supports. - devdata: device private data - ops: thermal zone device call-backs. - .bind: bind the thermal zone device with a thermal cooling device. - .unbind: unbind the thermal zone device with a thermal cooling device. - .get_temp: get the current temperature of the thermal zone. - .get_mode: get the current mode (user/kernel) of the thermal zone. - "kernel" means thermal management is done in kernel. - "user" will prevent kernel thermal driver actions upon trip points - so that user applications can take charge of thermal management. - .set_mode: set the mode (user/kernel) of the thermal zone. - .get_trip_type: get the type of certain trip point. - .get_trip_temp: get the temperature above which the certain trip point - will be fired. +1.1.1 struct thermal_zone_device *thermal_zone_device_register(char *name, + int trips, void *devdata, struct thermal_zone_device_ops *ops) + + This interface function adds a new thermal zone device (sensor) to + /sys/class/thermal folder as thermal_zone[0-*]. It tries to bind all the + thermal cooling devices registered at the same time. + + name: the thermal zone name. + trips: the total number of trip points this thermal zone supports. + devdata: device private data + ops: thermal zone device call-backs. + .bind: bind the thermal zone device with a thermal cooling device. + .unbind: unbind the thermal zone device with a thermal cooling device. + .get_temp: get the current temperature of the thermal zone. + .get_mode: get the current mode (user/kernel) of the thermal zone. + - "kernel" means thermal management is done in kernel. + - "user" will prevent kernel thermal driver actions upon trip points + so that user applications can take charge of thermal management. + .set_mode: set the mode (user/kernel) of the thermal zone. + .get_trip_type: get the type of certain trip point. + .get_trip_temp: get the temperature above which the certain trip point + will be fired. 1.1.2 void thermal_zone_device_unregister(struct thermal_zone_device *tz) - This interface function removes the thermal zone device. - It deletes the corresponding entry form /sys/class/thermal folder and unbind all - the thermal cooling devices it uses. + This interface function removes the thermal zone device. + It deletes the corresponding entry form /sys/class/thermal folder and + unbind all the thermal cooling devices it uses. 1.2 thermal cooling device interface 1.2.1 struct thermal_cooling_device *thermal_cooling_device_register(char *name, - void *devdata, struct thermal_cooling_device_ops *) - - This interface function adds a new thermal cooling device (fan/processor/...) to - /sys/class/thermal/ folder as cooling_device[0-*]. - It tries to bind itself to all the thermal zone devices register at the same time. - name: the cooling device name. - devdata: device private data. - ops: thermal cooling devices call-backs. - .get_max_state: get the Maximum throttle state of the cooling device. - .get_cur_state: get the Current throttle state of the cooling device. - .set_cur_state: set the Current throttle state of the cooling device. + void *devdata, struct thermal_cooling_device_ops *) + + This interface function adds a new thermal cooling device (fan/processor/...) + to /sys/class/thermal/ folder as cooling_device[0-*]. It tries to bind itself + to all the thermal zone devices register at the same time. + name: the cooling device name. + devdata: device private data. + ops: thermal cooling devices call-backs. + .get_max_state: get the Maximum throttle state of the cooling device. + .get_cur_state: get the Current throttle state of the cooling device. + .set_cur_state: set the Current throttle state of the cooling device. 1.2.2 void thermal_cooling_device_unregister(struct thermal_cooling_device *cdev) - This interface function remove the thermal cooling device. - It deletes the corresponding entry form /sys/class/thermal folder and unbind - itself from all the thermal zone devices using it. + This interface function remove the thermal cooling device. + It deletes the corresponding entry form /sys/class/thermal folder and + unbind itself from all the thermal zone devices using it. 1.3 interface for binding a thermal zone device with a thermal cooling device 1.3.1 int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, - int trip, struct thermal_cooling_device *cdev); + int trip, struct thermal_cooling_device *cdev); - This interface function bind a thermal cooling device to the certain trip point - of a thermal zone device. - This function is usually called in the thermal zone device .bind callback. - tz: the thermal zone device - cdev: thermal cooling device - trip: indicates which trip point the cooling devices is associated with - in this thermal zone. + This interface function bind a thermal cooling device to the certain trip + point of a thermal zone device. + This function is usually called in the thermal zone device .bind callback. + tz: the thermal zone device + cdev: thermal cooling device + trip: indicates which trip point the cooling devices is associated with + in this thermal zone. 1.3.2 int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz, - int trip, struct thermal_cooling_device *cdev); + int trip, struct thermal_cooling_device *cdev); - This interface function unbind a thermal cooling device from the certain trip point - of a thermal zone device. - This function is usually called in the thermal zone device .unbind callback. - tz: the thermal zone device - cdev: thermal cooling device - trip: indicates which trip point the cooling devices is associated with - in this thermal zone. + This interface function unbind a thermal cooling device from the certain + trip point of a thermal zone device. This function is usually called in + the thermal zone device .unbind callback. + tz: the thermal zone device + cdev: thermal cooling device + trip: indicates which trip point the cooling devices is associated with + in this thermal zone. 2. sysfs attributes structure @@ -114,153 +114,157 @@ if hwmon is compiled in or built as a module. Thermal zone device sys I/F, created once it's registered: /sys/class/thermal/thermal_zone[0-*]: - |-----type: Type of the thermal zone - |-----temp: Current temperature - |-----mode: Working mode of the thermal zone - |-----trip_point_[0-*]_temp: Trip point temperature - |-----trip_point_[0-*]_type: Trip point type + |---type: Type of the thermal zone + |---temp: Current temperature + |---mode: Working mode of the thermal zone + |---trip_point_[0-*]_temp: Trip point temperature + |---trip_point_[0-*]_type: Trip point type Thermal cooling device sys I/F, created once it's registered: /sys/class/thermal/cooling_device[0-*]: - |-----type : Type of the cooling device(processor/fan/...) - |-----max_state: Maximum cooling state of the cooling device - |-----cur_state: Current cooling state of the cooling device + |---type: Type of the cooling device(processor/fan/...) + |---max_state: Maximum cooling state of the cooling device + |---cur_state: Current cooling state of the cooling device -These two dynamic attributes are created/removed in pairs. -They represent the relationship between a thermal zone and its associated cooling device. -They are created/removed for each -thermal_zone_bind_cooling_device/thermal_zone_unbind_cooling_device successful execution. +Then next two dynamic attributes are created/removed in pairs. They represent +the relationship between a thermal zone and its associated cooling device. +They are created/removed for each successful execution of +thermal_zone_bind_cooling_device/thermal_zone_unbind_cooling_device. -/sys/class/thermal/thermal_zone[0-*] - |-----cdev[0-*]: The [0-*]th cooling device in the current thermal zone - |-----cdev[0-*]_trip_point: Trip point that cdev[0-*] is associated with +/sys/class/thermal/thermal_zone[0-*]: + |---cdev[0-*]: [0-*]th cooling device in current thermal zone + |---cdev[0-*]_trip_point: Trip point that cdev[0-*] is associated with Besides the thermal zone device sysfs I/F and cooling device sysfs I/F, -the generic thermal driver also creates a hwmon sysfs I/F for each _type_ of -thermal zone device. E.g. the generic thermal driver registers one hwmon class device -and build the associated hwmon sysfs I/F for all the registered ACPI thermal zones. +the generic thermal driver also creates a hwmon sysfs I/F for each _type_ +of thermal zone device. E.g. the generic thermal driver registers one hwmon +class device and build the associated hwmon sysfs I/F for all the registered +ACPI thermal zones. + /sys/class/hwmon/hwmon[0-*]: - |-----name: The type of the thermal zone devices. - |-----temp[1-*]_input: The current temperature of thermal zone [1-*]. - |-----temp[1-*]_critical: The critical trip point of thermal zone [1-*]. + |---name: The type of the thermal zone devices + |---temp[1-*]_input: The current temperature of thermal zone [1-*] + |---temp[1-*]_critical: The critical trip point of thermal zone [1-*] + Please read Documentation/hwmon/sysfs-interface for additional information. *************************** * Thermal zone attributes * *************************** -type Strings which represent the thermal zone type. - This is given by thermal zone driver as part of registration. - Eg: "acpitz" indicates it's an ACPI thermal device. - In order to keep it consistent with hwmon sys attribute, - this should be a short, lowercase string, - not containing spaces nor dashes. - RO - Required - -temp Current temperature as reported by thermal zone (sensor) - Unit: millidegree Celsius - RO - Required - -mode One of the predefined values in [kernel, user] - This file gives information about the algorithm - that is currently managing the thermal zone. - It can be either default kernel based algorithm - or user space application. - RW - Optional - kernel = Thermal management in kernel thermal zone driver. - user = Preventing kernel thermal zone driver actions upon - trip points so that user application can take full - charge of the thermal management. - -trip_point_[0-*]_temp The temperature above which trip point will be fired - Unit: millidegree Celsius - RO - Optional - -trip_point_[0-*]_type Strings which indicate the type of the trip point - E.g. it can be one of critical, hot, passive, - active[0-*] for ACPI thermal zone. - RO - Optional - -cdev[0-*] Sysfs link to the thermal cooling device node where the sys I/F - for cooling device throttling control represents. - RO - Optional - -cdev[0-*]_trip_point The trip point with which cdev[0-*] is associated in this thermal zone - -1 means the cooling device is not associated with any trip point. - RO - Optional - -****************************** -* Cooling device attributes * -****************************** - -type String which represents the type of device - eg: For generic ACPI: this should be "Fan", - "Processor" or "LCD" - eg. For memory controller device on intel_menlow platform: - this should be "Memory controller" - RO - Required - -max_state The maximum permissible cooling state of this cooling device. - RO - Required - -cur_state The current cooling state of this cooling device. - the value can any integer numbers between 0 and max_state, - cur_state == 0 means no cooling - cur_state == max_state means the maximum cooling. - RW - Required +type + Strings which represent the thermal zone type. + This is given by thermal zone driver as part of registration. + E.g: "acpitz" indicates it's an ACPI thermal device. + In order to keep it consistent with hwmon sys attribute; this should + be a short, lowercase string, not containing spaces nor dashes. + RO, Required + +temp + Current temperature as reported by thermal zone (sensor). + Unit: millidegree Celsius + RO, Required + +mode + One of the predefined values in [kernel, user]. + This file gives information about the algorithm that is currently + managing the thermal zone. It can be either default kernel based + algorithm or user space application. + kernel = Thermal management in kernel thermal zone driver. + user = Preventing kernel thermal zone driver actions upon + trip points so that user application can take full + charge of the thermal management. + RW, Optional + +trip_point_[0-*]_temp + The temperature above which trip point will be fired. + Unit: millidegree Celsius + RO, Optional + +trip_point_[0-*]_type + Strings which indicate the type of the trip point. + E.g. it can be one of critical, hot, passive, active[0-*] for ACPI + thermal zone. + RO, Optional + +cdev[0-*] + Sysfs link to the thermal cooling device node where the sys I/F + for cooling device throttling control represents. + RO, Optional + +cdev[0-*]_trip_point + The trip point with which cdev[0-*] is associated in this thermal + zone; -1 means the cooling device is not associated with any trip + point. + RO, Optional + +***************************** +* Cooling device attributes * +***************************** + +type + String which represents the type of device, e.g: + - for generic ACPI: should be "Fan", "Processor" or "LCD" + - for memory controller device on intel_menlow platform: + should be "Memory controller". + RO, Required + +max_state + The maximum permissible cooling state of this cooling device. + RO, Required + +cur_state + The current cooling state of this cooling device. + The value can any integer numbers between 0 and max_state: + - cur_state == 0 means no cooling + - cur_state == max_state means the maximum cooling. + RW, Required 3. A simple implementation -ACPI thermal zone may support multiple trip points like critical/hot/passive/active. -If an ACPI thermal zone supports critical, passive, active[0] and active[1] at the same time, -it may register itself as a thermal_zone_device (thermal_zone1) with 4 trip points in all. -It has one processor and one fan, which are both registered as thermal_cooling_device. -If the processor is listed in _PSL method, and the fan is listed in _AL0 method, -the sys I/F structure will be built like this: +ACPI thermal zone may support multiple trip points like critical, hot, +passive, active. If an ACPI thermal zone supports critical, passive, +active[0] and active[1] at the same time, it may register itself as a +thermal_zone_device (thermal_zone1) with 4 trip points in all. +It has one processor and one fan, which are both registered as +thermal_cooling_device. + +If the processor is listed in _PSL method, and the fan is listed in _AL0 +method, the sys I/F structure will be built like this: /sys/class/thermal: |thermal_zone1: - |-----type: acpitz - |-----temp: 37000 - |-----mode: kernel - |-----trip_point_0_temp: 100000 - |-----trip_point_0_type: critical - |-----trip_point_1_temp: 80000 - |-----trip_point_1_type: passive - |-----trip_point_2_temp: 70000 - |-----trip_point_2_type: active0 - |-----trip_point_3_temp: 60000 - |-----trip_point_3_type: active1 - |-----cdev0: --->/sys/class/thermal/cooling_device0 - |-----cdev0_trip_point: 1 /* cdev0 can be used for passive */ - |-----cdev1: --->/sys/class/thermal/cooling_device3 - |-----cdev1_trip_point: 2 /* cdev1 can be used for active[0]*/ + |---type: acpitz + |---temp: 37000 + |---mode: kernel + |---trip_point_0_temp: 100000 + |---trip_point_0_type: critical + |---trip_point_1_temp: 80000 + |---trip_point_1_type: passive + |---trip_point_2_temp: 70000 + |---trip_point_2_type: active0 + |---trip_point_3_temp: 60000 + |---trip_point_3_type: active1 + |---cdev0: --->/sys/class/thermal/cooling_device0 + |---cdev0_trip_point: 1 /* cdev0 can be used for passive */ + |---cdev1: --->/sys/class/thermal/cooling_device3 + |---cdev1_trip_point: 2 /* cdev1 can be used for active[0]*/ |cooling_device0: - |-----type: Processor - |-----max_state: 8 - |-----cur_state: 0 + |---type: Processor + |---max_state: 8 + |---cur_state: 0 |cooling_device3: - |-----type: Fan - |-----max_state: 2 - |-----cur_state: 0 + |---type: Fan + |---max_state: 2 + |---cur_state: 0 /sys/class/hwmon: |hwmon0: - |-----name: acpitz - |-----temp1_input: 37000 - |-----temp1_crit: 100000 + |---name: acpitz + |---temp1_input: 37000 + |---temp1_crit: 100000 -- cgit v0.10.2 From 29226ed3c3b5cd0b2b0b1fb40ffeac3f796b80e9 Mon Sep 17 00:00:00 2001 From: Frans Pop Date: Mon, 26 Oct 2009 08:39:00 +0100 Subject: thermal: sysfs-api.txt - document passive attribute for thermal zones Signed-off-by: Frans Pop Acked-by: Zhang Rui Signed-off-by: Andrew Morton Signed-off-by: Len Brown diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt index 895337f..a87dc27 100644 --- a/Documentation/thermal/sysfs-api.txt +++ b/Documentation/thermal/sysfs-api.txt @@ -199,6 +199,15 @@ cdev[0-*]_trip_point point. RO, Optional +passive + Attribute is only present for zones in which the passive cooling + policy is not supported by native thermal driver. Default is zero + and can be set to a temperature (in millidegrees) to enable a + passive trip point for the zone. Activation is done by polling with + an interval of 1 second. + Unit: millidegrees Celsius + RW, Optional + ***************************** * Cooling device attributes * ***************************** -- cgit v0.10.2 From ee59f2b462b0a7d2eb57ae59340d016589fa8e42 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 5 Nov 2009 13:11:46 -0500 Subject: drm/radeon/kms/r600: fix rs880 support v2 Lots of cases were wrong or missing. v2: rebased against drm-next Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 3e5703f..35360b0 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -858,7 +858,8 @@ void r600_gpu_init(struct radeon_device *rdev) ((rdev->family) == CHIP_RV630) || ((rdev->family) == CHIP_RV610) || ((rdev->family) == CHIP_RV620) || - ((rdev->family) == CHIP_RS780)) { + ((rdev->family) == CHIP_RS780) || + ((rdev->family) == CHIP_RS880)) { WREG32(DB_DEBUG, PREZ_MUST_WAIT_FOR_POSTZ_DONE); } else { WREG32(DB_DEBUG, 0); @@ -875,7 +876,8 @@ void r600_gpu_init(struct radeon_device *rdev) tmp = RREG32(SQ_MS_FIFO_SIZES); if (((rdev->family) == CHIP_RV610) || ((rdev->family) == CHIP_RV620) || - ((rdev->family) == CHIP_RS780)) { + ((rdev->family) == CHIP_RS780) || + ((rdev->family) == CHIP_RS880)) { tmp = (CACHE_FIFO_SIZE(0xa) | FETCH_FIFO_HIWATER(0xa) | DONE_FIFO_HIWATER(0xe0) | @@ -918,7 +920,8 @@ void r600_gpu_init(struct radeon_device *rdev) NUM_ES_STACK_ENTRIES(0)); } else if (((rdev->family) == CHIP_RV610) || ((rdev->family) == CHIP_RV620) || - ((rdev->family) == CHIP_RS780)) { + ((rdev->family) == CHIP_RS780) || + ((rdev->family) == CHIP_RS880)) { /* no vertex cache */ sq_config &= ~VC_ENABLE; @@ -975,7 +978,8 @@ void r600_gpu_init(struct radeon_device *rdev) if (((rdev->family) == CHIP_RV610) || ((rdev->family) == CHIP_RV620) || - ((rdev->family) == CHIP_RS780)) { + ((rdev->family) == CHIP_RS780) || + ((rdev->family) == CHIP_RS880)) { WREG32(VGT_CACHE_INVALIDATION, CACHE_INVALIDATION(TC_ONLY)); } else { WREG32(VGT_CACHE_INVALIDATION, CACHE_INVALIDATION(VC_AND_TC)); @@ -1001,8 +1005,9 @@ void r600_gpu_init(struct radeon_device *rdev) tmp = rdev->config.r600.max_pipes * 16; switch (rdev->family) { case CHIP_RV610: - case CHIP_RS780: case CHIP_RV620: + case CHIP_RS780: + case CHIP_RS880: tmp += 32; break; case CHIP_RV670: @@ -1043,8 +1048,9 @@ void r600_gpu_init(struct radeon_device *rdev) switch (rdev->family) { case CHIP_RV610: - case CHIP_RS780: case CHIP_RV620: + case CHIP_RS780: + case CHIP_RS880: tmp = TC_L2_SIZE(8); break; case CHIP_RV630: diff --git a/drivers/gpu/drm/radeon/r600_blit_kms.c b/drivers/gpu/drm/radeon/r600_blit_kms.c index acae33e..dbf716e 100644 --- a/drivers/gpu/drm/radeon/r600_blit_kms.c +++ b/drivers/gpu/drm/radeon/r600_blit_kms.c @@ -368,7 +368,7 @@ set_default_state(struct radeon_device *rdev) if ((rdev->family == CHIP_RV610) || (rdev->family == CHIP_RV620) || (rdev->family == CHIP_RS780) || - (rdev->family == CHIP_RS780) || + (rdev->family == CHIP_RS880) || (rdev->family == CHIP_RV710)) sq_config = 0; else diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 1c9a9c4..0507224 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -277,7 +277,8 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev) ATOM_DEVICE_CV_SUPPORT) continue; - if ((rdev->family == CHIP_RS780) && + /* IGP chips */ + if ((rdev->flags & RADEON_IS_IGP) && (con_obj_id == CONNECTOR_OBJECT_ID_PCIE_CONNECTOR)) { uint16_t igp_offset = 0; -- cgit v0.10.2 From 4170a6c1bc106d7fcf94f5842224ac4dac61006b Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 5 Nov 2009 01:16:23 -0500 Subject: drm/radeon/kms/atom/dce3: fix up usPixelClock calculation for Transmitter tables Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index 2aa5994..355b0fb 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -725,10 +725,10 @@ atombios_dig_transmitter_setup(struct drm_encoder *encoder, int action) if (ASIC_IS_DCE32(rdev)) { if (radeon_encoder->pixel_clock > 165000) { - args.v2.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock * 10 * 2) / 100); + args.v2.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock / 2) / 10); args.v2.acConfig.fDualLinkConnector = 1; } else { - args.v2.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock * 10 * 4) / 100); + args.v2.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10); } if (dig->dig_block) args.v2.acConfig.ucEncoderSel = 1; @@ -754,7 +754,10 @@ atombios_dig_transmitter_setup(struct drm_encoder *encoder, int action) } } else { args.v1.ucConfig = ATOM_TRANSMITTER_CONFIG_CLKSRC_PPLL; - args.v1.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock) / 10); + if (radeon_encoder->pixel_clock > 165000) + args.v1.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock / 2) / 10); + else + args.v1.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10); switch (radeon_encoder->encoder_id) { case ENCODER_OBJECT_ID_INTERNAL_UNIPHY: -- cgit v0.10.2 From b75fad0682caacb16012582deecbd7d19bc2f68e Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 5 Nov 2009 13:16:01 -0500 Subject: drm/radeon/kms: store detailed connector info This will be useful for mode validation and certain atom tables. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 0507224..80aacde 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -46,7 +46,8 @@ radeon_add_atom_connector(struct drm_device *dev, uint32_t supported_device, int connector_type, struct radeon_i2c_bus_rec *i2c_bus, - bool linkb, uint32_t igp_lane_info); + bool linkb, uint32_t igp_lane_info, + uint16_t connector_object_id); /* from radeon_legacy_encoder.c */ extern void @@ -193,6 +194,23 @@ const int supported_devices_connector_convert[] = { DRM_MODE_CONNECTOR_DisplayPort }; +const uint16_t supported_devices_connector_object_id_convert[] = { + CONNECTOR_OBJECT_ID_NONE, + CONNECTOR_OBJECT_ID_VGA, + CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I, /* not all boards support DL */ + CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D, /* not all boards support DL */ + CONNECTOR_OBJECT_ID_VGA, /* technically DVI-A */ + CONNECTOR_OBJECT_ID_COMPOSITE, + CONNECTOR_OBJECT_ID_SVIDEO, + CONNECTOR_OBJECT_ID_LVDS, + CONNECTOR_OBJECT_ID_9PIN_DIN, + CONNECTOR_OBJECT_ID_9PIN_DIN, + CONNECTOR_OBJECT_ID_DISPLAYPORT, + CONNECTOR_OBJECT_ID_HDMI_TYPE_A, + CONNECTOR_OBJECT_ID_HDMI_TYPE_B, + CONNECTOR_OBJECT_ID_SVIDEO +}; + const int object_connector_convert[] = { DRM_MODE_CONNECTOR_Unknown, DRM_MODE_CONNECTOR_DVII, @@ -229,7 +247,7 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev) ATOM_OBJECT_HEADER *obj_header; int i, j, path_size, device_support; int connector_type; - uint16_t igp_lane_info, conn_id; + uint16_t igp_lane_info, conn_id, connector_object_id; bool linkb; struct radeon_i2c_bus_rec ddc_bus; @@ -312,6 +330,7 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev) connector_type = object_connector_convert [ct]; + connector_object_id = ct; igp_lane_info = slot_config & 0xffff; } else @@ -322,6 +341,7 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev) igp_lane_info = 0; connector_type = object_connector_convert[con_obj_id]; + connector_object_id = con_obj_id; } if (connector_type == DRM_MODE_CONNECTOR_Unknown) @@ -426,7 +446,8 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev) le16_to_cpu(path-> usDeviceTag), connector_type, &ddc_bus, - linkb, igp_lane_info); + linkb, igp_lane_info, + connector_object_id); } } @@ -436,6 +457,45 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev) return true; } +static uint16_t atombios_get_connector_object_id(struct drm_device *dev, + int connector_type, + uint16_t devices) +{ + struct radeon_device *rdev = dev->dev_private; + + if (rdev->flags & RADEON_IS_IGP) { + return supported_devices_connector_object_id_convert + [connector_type]; + } else if (((connector_type == DRM_MODE_CONNECTOR_DVII) || + (connector_type == DRM_MODE_CONNECTOR_DVID)) && + (devices & ATOM_DEVICE_DFP2_SUPPORT)) { + struct radeon_mode_info *mode_info = &rdev->mode_info; + struct atom_context *ctx = mode_info->atom_context; + int index = GetIndexIntoMasterTable(DATA, XTMDS_Info); + uint16_t size, data_offset; + uint8_t frev, crev; + ATOM_XTMDS_INFO *xtmds; + + atom_parse_data_header(ctx, index, &size, &frev, &crev, &data_offset); + xtmds = (ATOM_XTMDS_INFO *)(ctx->bios + data_offset); + + if (xtmds->ucSupportedLink & ATOM_XTMDS_SUPPORTED_DUALLINK) { + if (connector_type == DRM_MODE_CONNECTOR_DVII) + return CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I; + else + return CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D; + } else { + if (connector_type == DRM_MODE_CONNECTOR_DVII) + return CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I; + else + return CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D; + } + } else { + return supported_devices_connector_object_id_convert + [connector_type]; + } +} + struct bios_connector { bool valid; uint16_t line_mux; @@ -594,14 +654,20 @@ bool radeon_get_atom_connector_info_from_supported_devices_table(struct /* add the connectors */ for (i = 0; i < ATOM_MAX_SUPPORTED_DEVICE; i++) { - if (bios_connectors[i].valid) + if (bios_connectors[i].valid) { + uint16_t connector_object_id = + atombios_get_connector_object_id(dev, + bios_connectors[i].connector_type, + bios_connectors[i].devices); radeon_add_atom_connector(dev, bios_connectors[i].line_mux, bios_connectors[i].devices, bios_connectors[i]. connector_type, &bios_connectors[i].ddc_bus, - false, 0); + false, 0, + connector_object_id); + } } radeon_link_encoder_connector(dev); diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c index a36ede0..5253cbf 100644 --- a/drivers/gpu/drm/radeon/radeon_combios.c +++ b/drivers/gpu/drm/radeon/radeon_combios.c @@ -49,7 +49,8 @@ radeon_add_legacy_connector(struct drm_device *dev, uint32_t connector_id, uint32_t supported_device, int connector_type, - struct radeon_i2c_bus_rec *i2c_bus); + struct radeon_i2c_bus_rec *i2c_bus, + uint16_t connector_object_id); /* from radeon_legacy_encoder.c */ extern void @@ -1176,7 +1177,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_CRT1_SUPPORT, DRM_MODE_CONNECTOR_VGA, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_VGA); } else if (rdev->flags & RADEON_IS_MOBILITY) { /* LVDS */ ddc_i2c = combios_setup_i2c_bus(RADEON_LCD_GPIO_MASK); @@ -1188,7 +1190,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_LCD1_SUPPORT, DRM_MODE_CONNECTOR_LVDS, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_LVDS); /* VGA - primary dac */ ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_VGA_DDC); @@ -1200,7 +1203,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_CRT1_SUPPORT, DRM_MODE_CONNECTOR_VGA, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_VGA); } else { /* DVI-I - tv dac, int tmds */ ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_DVI_DDC); @@ -1218,7 +1222,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) ATOM_DEVICE_DFP1_SUPPORT | ATOM_DEVICE_CRT2_SUPPORT, DRM_MODE_CONNECTOR_DVII, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I); /* VGA - primary dac */ ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_VGA_DDC); @@ -1230,7 +1235,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_CRT1_SUPPORT, DRM_MODE_CONNECTOR_VGA, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_VGA); } if (rdev->family != CHIP_R100 && rdev->family != CHIP_R200) { @@ -1243,7 +1249,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) radeon_add_legacy_connector(dev, 2, ATOM_DEVICE_TV1_SUPPORT, DRM_MODE_CONNECTOR_SVIDEO, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SVIDEO); } break; case CT_IBOOK: @@ -1257,7 +1264,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) 0), ATOM_DEVICE_LCD1_SUPPORT); radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_LCD1_SUPPORT, - DRM_MODE_CONNECTOR_LVDS, &ddc_i2c); + DRM_MODE_CONNECTOR_LVDS, &ddc_i2c, + CONNECTOR_OBJECT_ID_LVDS); /* VGA - TV DAC */ ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_VGA_DDC); radeon_add_legacy_encoder(dev, @@ -1266,7 +1274,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) 2), ATOM_DEVICE_CRT2_SUPPORT); radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_CRT2_SUPPORT, - DRM_MODE_CONNECTOR_VGA, &ddc_i2c); + DRM_MODE_CONNECTOR_VGA, &ddc_i2c, + CONNECTOR_OBJECT_ID_VGA); /* TV - TV DAC */ radeon_add_legacy_encoder(dev, radeon_get_encoder_id(dev, @@ -1275,7 +1284,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) ATOM_DEVICE_TV1_SUPPORT); radeon_add_legacy_connector(dev, 2, ATOM_DEVICE_TV1_SUPPORT, DRM_MODE_CONNECTOR_SVIDEO, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SVIDEO); break; case CT_POWERBOOK_EXTERNAL: DRM_INFO("Connector Table: %d (powerbook external tmds)\n", @@ -1288,7 +1298,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) 0), ATOM_DEVICE_LCD1_SUPPORT); radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_LCD1_SUPPORT, - DRM_MODE_CONNECTOR_LVDS, &ddc_i2c); + DRM_MODE_CONNECTOR_LVDS, &ddc_i2c, + CONNECTOR_OBJECT_ID_LVDS); /* DVI-I - primary dac, ext tmds */ ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_VGA_DDC); radeon_add_legacy_encoder(dev, @@ -1301,10 +1312,12 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) ATOM_DEVICE_CRT1_SUPPORT, 1), ATOM_DEVICE_CRT1_SUPPORT); + /* XXX some are SL */ radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_DFP2_SUPPORT | ATOM_DEVICE_CRT1_SUPPORT, - DRM_MODE_CONNECTOR_DVII, &ddc_i2c); + DRM_MODE_CONNECTOR_DVII, &ddc_i2c, + CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I); /* TV - TV DAC */ radeon_add_legacy_encoder(dev, radeon_get_encoder_id(dev, @@ -1313,7 +1326,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) ATOM_DEVICE_TV1_SUPPORT); radeon_add_legacy_connector(dev, 2, ATOM_DEVICE_TV1_SUPPORT, DRM_MODE_CONNECTOR_SVIDEO, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SVIDEO); break; case CT_POWERBOOK_INTERNAL: DRM_INFO("Connector Table: %d (powerbook internal tmds)\n", @@ -1326,7 +1340,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) 0), ATOM_DEVICE_LCD1_SUPPORT); radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_LCD1_SUPPORT, - DRM_MODE_CONNECTOR_LVDS, &ddc_i2c); + DRM_MODE_CONNECTOR_LVDS, &ddc_i2c, + CONNECTOR_OBJECT_ID_LVDS); /* DVI-I - primary dac, int tmds */ ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_VGA_DDC); radeon_add_legacy_encoder(dev, @@ -1342,7 +1357,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_DFP1_SUPPORT | ATOM_DEVICE_CRT1_SUPPORT, - DRM_MODE_CONNECTOR_DVII, &ddc_i2c); + DRM_MODE_CONNECTOR_DVII, &ddc_i2c, + CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I); /* TV - TV DAC */ radeon_add_legacy_encoder(dev, radeon_get_encoder_id(dev, @@ -1351,7 +1367,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) ATOM_DEVICE_TV1_SUPPORT); radeon_add_legacy_connector(dev, 2, ATOM_DEVICE_TV1_SUPPORT, DRM_MODE_CONNECTOR_SVIDEO, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SVIDEO); break; case CT_POWERBOOK_VGA: DRM_INFO("Connector Table: %d (powerbook vga)\n", @@ -1364,7 +1381,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) 0), ATOM_DEVICE_LCD1_SUPPORT); radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_LCD1_SUPPORT, - DRM_MODE_CONNECTOR_LVDS, &ddc_i2c); + DRM_MODE_CONNECTOR_LVDS, &ddc_i2c, + CONNECTOR_OBJECT_ID_LVDS); /* VGA - primary dac */ ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_VGA_DDC); radeon_add_legacy_encoder(dev, @@ -1373,7 +1391,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) 1), ATOM_DEVICE_CRT1_SUPPORT); radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_CRT1_SUPPORT, - DRM_MODE_CONNECTOR_VGA, &ddc_i2c); + DRM_MODE_CONNECTOR_VGA, &ddc_i2c, + CONNECTOR_OBJECT_ID_VGA); /* TV - TV DAC */ radeon_add_legacy_encoder(dev, radeon_get_encoder_id(dev, @@ -1382,7 +1401,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) ATOM_DEVICE_TV1_SUPPORT); radeon_add_legacy_connector(dev, 2, ATOM_DEVICE_TV1_SUPPORT, DRM_MODE_CONNECTOR_SVIDEO, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SVIDEO); break; case CT_MINI_EXTERNAL: DRM_INFO("Connector Table: %d (mini external tmds)\n", @@ -1399,10 +1419,12 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) ATOM_DEVICE_CRT2_SUPPORT, 2), ATOM_DEVICE_CRT2_SUPPORT); + /* XXX are any DL? */ radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_DFP2_SUPPORT | ATOM_DEVICE_CRT2_SUPPORT, - DRM_MODE_CONNECTOR_DVII, &ddc_i2c); + DRM_MODE_CONNECTOR_DVII, &ddc_i2c, + CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I); /* TV - TV DAC */ radeon_add_legacy_encoder(dev, radeon_get_encoder_id(dev, @@ -1411,7 +1433,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) ATOM_DEVICE_TV1_SUPPORT); radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_TV1_SUPPORT, DRM_MODE_CONNECTOR_SVIDEO, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SVIDEO); break; case CT_MINI_INTERNAL: DRM_INFO("Connector Table: %d (mini internal tmds)\n", @@ -1431,7 +1454,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_DFP1_SUPPORT | ATOM_DEVICE_CRT2_SUPPORT, - DRM_MODE_CONNECTOR_DVII, &ddc_i2c); + DRM_MODE_CONNECTOR_DVII, &ddc_i2c, + CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I); /* TV - TV DAC */ radeon_add_legacy_encoder(dev, radeon_get_encoder_id(dev, @@ -1440,7 +1464,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) ATOM_DEVICE_TV1_SUPPORT); radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_TV1_SUPPORT, DRM_MODE_CONNECTOR_SVIDEO, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SVIDEO); break; case CT_IMAC_G5_ISIGHT: DRM_INFO("Connector Table: %d (imac g5 isight)\n", @@ -1453,7 +1478,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) 0), ATOM_DEVICE_DFP1_SUPPORT); radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_DFP1_SUPPORT, - DRM_MODE_CONNECTOR_DVID, &ddc_i2c); + DRM_MODE_CONNECTOR_DVID, &ddc_i2c, + CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D); /* VGA - tv dac */ ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_DVI_DDC); radeon_add_legacy_encoder(dev, @@ -1462,7 +1488,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) 2), ATOM_DEVICE_CRT2_SUPPORT); radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_CRT2_SUPPORT, - DRM_MODE_CONNECTOR_VGA, &ddc_i2c); + DRM_MODE_CONNECTOR_VGA, &ddc_i2c, + CONNECTOR_OBJECT_ID_VGA); /* TV - TV DAC */ radeon_add_legacy_encoder(dev, radeon_get_encoder_id(dev, @@ -1471,7 +1498,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) ATOM_DEVICE_TV1_SUPPORT); radeon_add_legacy_connector(dev, 2, ATOM_DEVICE_TV1_SUPPORT, DRM_MODE_CONNECTOR_SVIDEO, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SVIDEO); break; case CT_EMAC: DRM_INFO("Connector Table: %d (emac)\n", @@ -1484,7 +1512,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) 1), ATOM_DEVICE_CRT1_SUPPORT); radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_CRT1_SUPPORT, - DRM_MODE_CONNECTOR_VGA, &ddc_i2c); + DRM_MODE_CONNECTOR_VGA, &ddc_i2c, + CONNECTOR_OBJECT_ID_VGA); /* VGA - tv dac */ ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_CRT2_DDC); radeon_add_legacy_encoder(dev, @@ -1493,7 +1522,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) 2), ATOM_DEVICE_CRT2_SUPPORT); radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_CRT2_SUPPORT, - DRM_MODE_CONNECTOR_VGA, &ddc_i2c); + DRM_MODE_CONNECTOR_VGA, &ddc_i2c, + CONNECTOR_OBJECT_ID_VGA); /* TV - TV DAC */ radeon_add_legacy_encoder(dev, radeon_get_encoder_id(dev, @@ -1502,7 +1532,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) ATOM_DEVICE_TV1_SUPPORT); radeon_add_legacy_connector(dev, 2, ATOM_DEVICE_TV1_SUPPORT, DRM_MODE_CONNECTOR_SVIDEO, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SVIDEO); break; default: DRM_INFO("Connector table: %d (invalid)\n", @@ -1596,11 +1627,46 @@ static bool radeon_apply_legacy_tv_quirks(struct drm_device *dev) return true; } +static uint16_t combios_check_dl_dvi(struct drm_device *dev, int is_dvi_d) +{ + struct radeon_device *rdev = dev->dev_private; + uint32_t ext_tmds_info; + + if (rdev->flags & RADEON_IS_IGP) { + if (is_dvi_d) + return CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D; + else + return CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I; + } + ext_tmds_info = combios_get_table_offset(dev, COMBIOS_EXT_TMDS_INFO_TABLE); + if (ext_tmds_info) { + uint8_t rev = RBIOS8(ext_tmds_info); + uint8_t flags = RBIOS8(ext_tmds_info + 4 + 5); + if (rev >= 3) { + if (is_dvi_d) + return CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D; + else + return CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I; + } else { + if (flags & 1) { + if (is_dvi_d) + return CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D; + else + return CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I; + } + } + } + if (is_dvi_d) + return CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D; + else + return CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I; +} + bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) { struct radeon_device *rdev = dev->dev_private; uint32_t conn_info, entry, devices; - uint16_t tmp; + uint16_t tmp, connector_object_id; enum radeon_combios_ddc ddc_type; enum radeon_combios_connector connector; int i = 0; @@ -1660,7 +1726,8 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) radeon_add_legacy_connector(dev, i, devices, legacy_connector_convert [connector], - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D); break; case CONNECTOR_CRT_LEGACY: if (tmp & 0x1) { @@ -1685,7 +1752,8 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) devices, legacy_connector_convert [connector], - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_VGA); break; case CONNECTOR_DVI_I_LEGACY: devices = 0; @@ -1714,6 +1782,7 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) ATOM_DEVICE_DFP2_SUPPORT, 0), ATOM_DEVICE_DFP2_SUPPORT); + connector_object_id = combios_check_dl_dvi(dev, 0); } else { devices |= ATOM_DEVICE_DFP1_SUPPORT; radeon_add_legacy_encoder(dev, @@ -1722,19 +1791,24 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) ATOM_DEVICE_DFP1_SUPPORT, 0), ATOM_DEVICE_DFP1_SUPPORT); + connector_object_id = CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I; } radeon_add_legacy_connector(dev, i, devices, legacy_connector_convert [connector], - &ddc_i2c); + &ddc_i2c, + connector_object_id); break; case CONNECTOR_DVI_D_LEGACY: - if ((tmp >> 4) & 0x1) + if ((tmp >> 4) & 0x1) { devices = ATOM_DEVICE_DFP2_SUPPORT; - else + connector_object_id = combios_check_dl_dvi(dev, 1); + } else { devices = ATOM_DEVICE_DFP1_SUPPORT; + connector_object_id = CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I; + } radeon_add_legacy_encoder(dev, radeon_get_encoder_id (dev, devices, 0), @@ -1742,7 +1816,8 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) radeon_add_legacy_connector(dev, i, devices, legacy_connector_convert [connector], - &ddc_i2c); + &ddc_i2c, + connector_object_id); break; case CONNECTOR_CTV_LEGACY: case CONNECTOR_STV_LEGACY: @@ -1756,7 +1831,8 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) ATOM_DEVICE_TV1_SUPPORT, legacy_connector_convert [connector], - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SVIDEO); break; default: DRM_ERROR("Unknown connector type: %d\n", @@ -1788,7 +1864,8 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) ATOM_DEVICE_CRT1_SUPPORT | ATOM_DEVICE_DFP1_SUPPORT, DRM_MODE_CONNECTOR_DVII, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I); } else { uint16_t crt_info = combios_get_table_offset(dev, COMBIOS_CRT_INFO_TABLE); @@ -1804,7 +1881,8 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) 0, ATOM_DEVICE_CRT1_SUPPORT, DRM_MODE_CONNECTOR_VGA, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_VGA); } else { DRM_DEBUG("No connector info found\n"); return false; @@ -1903,7 +1981,8 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) 5, ATOM_DEVICE_LCD1_SUPPORT, DRM_MODE_CONNECTOR_LVDS, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_LVDS); } } @@ -1923,7 +2002,8 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) radeon_add_legacy_connector(dev, 6, ATOM_DEVICE_TV1_SUPPORT, DRM_MODE_CONNECTOR_SVIDEO, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SVIDEO); } } } diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index ce3a785..fb4d918 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -823,7 +823,8 @@ radeon_add_atom_connector(struct drm_device *dev, int connector_type, struct radeon_i2c_bus_rec *i2c_bus, bool linkb, - uint32_t igp_lane_info) + uint32_t igp_lane_info, + uint16_t connector_object_id) { struct radeon_device *rdev = dev->dev_private; struct drm_connector *connector; @@ -862,6 +863,7 @@ radeon_add_atom_connector(struct drm_device *dev, radeon_connector->connector_id = connector_id; radeon_connector->devices = supported_device; radeon_connector->shared_ddc = shared_ddc; + radeon_connector->connector_object_id = connector_object_id; switch (connector_type) { case DRM_MODE_CONNECTOR_VGA: drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type); @@ -1013,7 +1015,8 @@ radeon_add_legacy_connector(struct drm_device *dev, uint32_t connector_id, uint32_t supported_device, int connector_type, - struct radeon_i2c_bus_rec *i2c_bus) + struct radeon_i2c_bus_rec *i2c_bus, + uint16_t connector_object_id) { struct radeon_device *rdev = dev->dev_private; struct drm_connector *connector; @@ -1042,6 +1045,7 @@ radeon_add_legacy_connector(struct drm_device *dev, radeon_connector->connector_id = connector_id; radeon_connector->devices = supported_device; + radeon_connector->connector_object_id = connector_object_id; switch (connector_type) { case DRM_MODE_CONNECTOR_VGA: drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type); diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h index ccb7838..ace726a 100644 --- a/drivers/gpu/drm/radeon/radeon_mode.h +++ b/drivers/gpu/drm/radeon/radeon_mode.h @@ -317,6 +317,7 @@ struct radeon_connector { struct edid *edid; void *con_priv; bool dac_load_detect; + uint16_t connector_object_id; }; struct radeon_framebuffer { -- cgit v0.10.2 From f95a9f0b05d22cffc46fbd2d065b260f8405e43f Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 5 Nov 2009 02:21:06 -0500 Subject: drm/radeon/kms/atom/dce3: call transmitter init on mode set Generally this is done at post, but might not always be done with softboot or for connectors on docking stations. Could probably be done once when the driver loads/resumes rather than on each mode set. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index 355b0fb..d42bc51 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -722,14 +722,17 @@ atombios_dig_transmitter_setup(struct drm_encoder *encoder, int action) atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev); args.v1.ucAction = action; - + if (action == ATOM_TRANSMITTER_ACTION_INIT) { + args.v1.usInitInfo = radeon_connector->connector_object_id; + } else { + if (radeon_encoder->pixel_clock > 165000) + args.v1.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock / 2) / 10); + else + args.v1.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10); + } if (ASIC_IS_DCE32(rdev)) { - if (radeon_encoder->pixel_clock > 165000) { + if (radeon_encoder->pixel_clock > 165000) args.v2.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock / 2) / 10); - args.v2.acConfig.fDualLinkConnector = 1; - } else { - args.v2.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10); - } if (dig->dig_block) args.v2.acConfig.ucEncoderSel = 1; @@ -754,10 +757,6 @@ atombios_dig_transmitter_setup(struct drm_encoder *encoder, int action) } } else { args.v1.ucConfig = ATOM_TRANSMITTER_CONFIG_CLKSRC_PPLL; - if (radeon_encoder->pixel_clock > 165000) - args.v1.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock / 2) / 10); - else - args.v1.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10); switch (radeon_encoder->encoder_id) { case ENCODER_OBJECT_ID_INTERNAL_UNIPHY: @@ -1140,6 +1139,7 @@ radeon_atom_encoder_mode_set(struct drm_encoder *encoder, /* setup and enable the encoder and transmitter */ atombios_dig_encoder_setup(encoder, ATOM_ENABLE); + atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_INIT); atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_SETUP); atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE); break; -- cgit v0.10.2 From a3fa6320ce964f799388b152a1b0f6e2c3b32a7f Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 5 Nov 2009 11:57:07 -0500 Subject: drm/radeon/kms: initial mode validation support Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index fb4d918..fce4c40 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -397,6 +397,30 @@ static int radeon_lvds_get_modes(struct drm_connector *connector) static int radeon_lvds_mode_valid(struct drm_connector *connector, struct drm_display_mode *mode) { + struct drm_encoder *encoder = radeon_best_single_encoder(connector); + + if ((mode->hdisplay < 320) || (mode->vdisplay < 240)) + return MODE_PANEL; + + if (encoder) { + struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); + struct drm_display_mode *native_mode = &radeon_encoder->native_mode; + + /* AVIVO hardware supports downscaling modes larger than the panel + * to the panel size, but I'm not sure this is desirable. + */ + if ((mode->hdisplay > native_mode->hdisplay) || + (mode->vdisplay > native_mode->vdisplay)) + return MODE_PANEL; + + /* if scaling is disabled, block non-native modes */ + if (radeon_encoder->rmx_type == RMX_OFF) { + if ((mode->hdisplay != native_mode->hdisplay) || + (mode->vdisplay != native_mode->vdisplay)) + return MODE_PANEL; + } + } + return MODE_OK; } @@ -512,6 +536,8 @@ static int radeon_vga_get_modes(struct drm_connector *connector) static int radeon_vga_mode_valid(struct drm_connector *connector, struct drm_display_mode *mode) { + /* XXX check mode bandwidth */ + /* XXX verify against max DAC output frequency */ return MODE_OK; } @@ -609,6 +635,8 @@ static int radeon_tv_get_modes(struct drm_connector *connector) static int radeon_tv_mode_valid(struct drm_connector *connector, struct drm_display_mode *mode) { + if ((mode->hdisplay > 1024) || (mode->vdisplay > 768)) + return MODE_CLOCK_RANGE; return MODE_OK; } @@ -801,9 +829,27 @@ static void radeon_dvi_force(struct drm_connector *connector) radeon_connector->use_digital = true; } +static int radeon_dvi_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + struct radeon_connector *radeon_connector = to_radeon_connector(connector); + + /* XXX check mode bandwidth */ + + if (radeon_connector->use_digital && (mode->clock > 165000)) { + if ((radeon_connector->connector_object_id == CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I) || + (radeon_connector->connector_object_id == CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D) || + (radeon_connector->connector_object_id == CONNECTOR_OBJECT_ID_HDMI_TYPE_B)) + return MODE_OK; + else + return MODE_CLOCK_HIGH; + } + return MODE_OK; +} + struct drm_connector_helper_funcs radeon_dvi_connector_helper_funcs = { .get_modes = radeon_dvi_get_modes, - .mode_valid = radeon_vga_mode_valid, + .mode_valid = radeon_dvi_mode_valid, .best_encoder = radeon_dvi_encoder, }; -- cgit v0.10.2 From 24395a85d8efe6eee477ea35c73d045a8dd7a3a1 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 6 Nov 2009 14:59:27 +1100 Subject: md: don't clear endpoint for resync when resync is interrupted. If a 'sync_max' has been set (via sysfs), it is wrong to clear it until a resync (or reshape or recovery ...) actually reached that point. So if a resync is interrupted (e.g. by device failure), leave 'resync_max' unchanged. This is particularly important for 'reshape' operations that do not change the size of the array. For such operations mdadm needs to monitor the reshape taking rolling backups of the section being reshaped. If resync_max gets cleared, the reshape can get ahead of mdadm and then the backups that mdadm creates are useless. This is suitable for 2.6.31.y stable kernels. Cc: stable@kernel.org Signed-off-by: NeilBrown diff --git a/drivers/md/md.c b/drivers/md/md.c index 10eb1fc..e64c971 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -6504,8 +6504,9 @@ void md_do_sync(mddev_t *mddev) skip: mddev->curr_resync = 0; mddev->curr_resync_completed = 0; - mddev->resync_min = 0; - mddev->resync_max = MaxSector; + if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery)) + /* We completed so max setting can be forgotten. */ + mddev->resync_max = MaxSector; sysfs_notify(&mddev->kobj, NULL, "sync_completed"); wake_up(&resync_wait); set_bit(MD_RECOVERY_DONE, &mddev->recovery); -- cgit v0.10.2 From 8dee7211467a56b7eb4e4359efb0aa4a72e1b6f3 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 6 Nov 2009 14:59:29 +1100 Subject: md/raid5: make sure curr_sync_completes is uptodate when reshape starts This value is visible through sysfs and is used by mdadm when it manages a reshape (backing up data that is about to be rearranged). So it is important that it is always correct. Current it does not get updated properly when a reshape starts which can cause problems when assembling an array that is in the middle of being reshaped. This is suitable for 2.6.31.y stable kernels. Cc: stable@kernel.org Signed-off-by: NeilBrown diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 81abefc..dcce204 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -4049,6 +4049,8 @@ static sector_t reshape_request(mddev_t *mddev, sector_t sector_nr, int *skipped sector_nr = conf->reshape_progress; sector_div(sector_nr, new_data_disks); if (sector_nr) { + mddev->curr_resync_completed = sector_nr; + sysfs_notify(&mddev->kobj, NULL, "sync_completed"); *skipped = 1; return sector_nr; } -- cgit v0.10.2 From 662aeced1512e008e5613b91de8e8b8e01017cb5 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Wed, 30 Sep 2009 13:02:42 -0700 Subject: [ARM] properly report mv78100 stepping A1 Signed-off-by: Lennert Buytenhek Signed-off-by: Nicolas Pitre diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index 1b22e4a..08465eb 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -845,6 +845,8 @@ static char * __init mv78xx0_id(void) } else if (dev == MV78100_DEV_ID) { if (rev == MV78100_REV_A0) return "MV78100-A0"; + else if (rev == MV78100_REV_A1) + return "MV78100-A1"; else return "MV78100-Rev-Unsupported"; } else if (dev == MV78200_DEV_ID) { diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h index d715b92..788bdac 100644 --- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h +++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h @@ -112,6 +112,7 @@ #define MV78100_DEV_ID 0x7810 #define MV78100_REV_A0 1 +#define MV78100_REV_A1 2 #define MV78200_DEV_ID 0x7820 #define MV78200_REV_A0 1 -- cgit v0.10.2 From 5d8965557318fabb1680d1817c2afc2714b6d3ce Mon Sep 17 00:00:00 2001 From: Simon Kagstrom Date: Fri, 9 Oct 2009 08:26:45 +0200 Subject: [ARM] OpenRD base: Initialize PCI express and i2c Signed-off-by: Simon Kagstrom Acked-by: Dieter Kiermaier Signed-off-by: Nicolas Pitre diff --git a/arch/arm/mach-kirkwood/openrd_base-setup.c b/arch/arm/mach-kirkwood/openrd_base-setup.c index 947dfb8..77617c7 100644 --- a/arch/arm/mach-kirkwood/openrd_base-setup.c +++ b/arch/arm/mach-kirkwood/openrd_base-setup.c @@ -70,8 +70,20 @@ static void __init openrd_base_init(void) kirkwood_ge00_init(&openrd_base_ge00_data); kirkwood_sata_init(&openrd_base_sata_data); kirkwood_sdio_init(&openrd_base_mvsdio_data); + + kirkwood_i2c_init(); } +static int __init openrd_base_pci_init(void) +{ + if (machine_is_openrd_base()) + kirkwood_pcie_init(); + + return 0; + } +subsys_initcall(openrd_base_pci_init); + + MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board") /* Maintainer: Dhaval Vasa */ .phys_io = KIRKWOOD_REGS_PHYS_BASE, -- cgit v0.10.2 From 6de95c198729d34a85c88f8844f1c3d57fb6da00 Mon Sep 17 00:00:00 2001 From: Li Jie Date: Thu, 5 Nov 2009 07:29:54 -0800 Subject: [ARM] kirkwood: fix section mismatch kirkwood_timer_init() and kirkwood_pcie_setup() lack of __init which causes following warnings: WARNING: vmlinux.o(.text+0x9568): Section mismatch in reference from the function kirkwood_timer_init() to the function .init.text:kirkwood_find_tclk() The function kirkwood_timer_init() references the function __init kirkwood_find_tclk(). This is often because kirkwood_timer_init lacks a __init annotation or the annotation of kirkwood_find_tclk is wrong. WARNING: vmlinux.o(.text+0x979c): Section mismatch in reference from the function kirkwood_pcie_setup() to the function .init.text:orion_pcie_setup() The function kirkwood_pcie_setup() references the function __init orion_pcie_setup(). This is often because kirkwood_pcie_setup lacks a __init annotation or the annotation of orion_pcie_setup is wrong. Signed-off-by: lijie Signed-off-by: Nicolas Pitre diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 0acb61f..7177c4a 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -845,7 +845,7 @@ int __init kirkwood_find_tclk(void) return 166666667; } -static void kirkwood_timer_init(void) +static void __init kirkwood_timer_init(void) { kirkwood_tclk = kirkwood_find_tclk(); orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk); diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index d90b9aa..5538820 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -93,7 +93,7 @@ static struct pci_ops pcie_ops = { }; -static int kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) +static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) { struct resource *res; extern unsigned int kirkwood_clk_ctrl; -- cgit v0.10.2 From 8a1cbf64977f89e9e9bc1d80dd01503337424f96 Mon Sep 17 00:00:00 2001 From: Gustavo Maciel Dias Vieira Date: Mon, 19 Oct 2009 09:41:53 -0200 Subject: ACPI: add DMI entry for SCI_EN resume quirk on HP dv4 Fixes the missing battery on sleep problem for yet another HP laptop ("HP Pavilion dv4"). Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=13449 Signed-off-by: Gustavo Maciel Dias Vieira Signed-off-by: Len Brown diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index a90afcc..ed9760a 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -413,6 +413,14 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = { }, }, { + .callback = init_set_sci_en_on_resume, + .ident = "Hewlett-Packard Pavilion dv4", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv4"), + }, + }, + { .callback = init_old_suspend_ordering, .ident = "Panasonic CF51-2L", .matches = { -- cgit v0.10.2 From 7433874e31f7f2e6e942b12012790565731d0f4a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Tue, 3 Nov 2009 00:53:02 +0100 Subject: drm/radeon/kms: add debugfs for power management for AtomBIOS devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rafał Miłecki Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/Makefile b/drivers/gpu/drm/radeon/Makefile index 09a28923..b5713ee 100644 --- a/drivers/gpu/drm/radeon/Makefile +++ b/drivers/gpu/drm/radeon/Makefile @@ -49,7 +49,7 @@ radeon-y += radeon_device.o radeon_kms.o \ radeon_cs.o radeon_bios.o radeon_benchmark.o r100.o r300.o r420.o \ rs400.o rs600.o rs690.o rv515.o r520.o r600.o rv770.o radeon_test.o \ r200.o radeon_legacy_tv.o r600_cs.o r600_blit.o r600_blit_shaders.o \ - r600_blit_kms.o + r600_blit_kms.o radeon_pm.o radeon-$(CONFIG_COMPAT) += radeon_ioc32.o diff --git a/drivers/gpu/drm/radeon/r420.c b/drivers/gpu/drm/radeon/r420.c index 5c7fe52..1cefdbc 100644 --- a/drivers/gpu/drm/radeon/r420.c +++ b/drivers/gpu/drm/radeon/r420.c @@ -311,6 +311,8 @@ int r420_init(struct radeon_device *rdev) } /* Initialize clocks */ radeon_get_clock_info(rdev->ddev); + /* Initialize power management */ + radeon_pm_init(rdev); /* Get vram informations */ r300_vram_info(rdev); /* Initialize memory controller (also test AGP) */ diff --git a/drivers/gpu/drm/radeon/r520.c b/drivers/gpu/drm/radeon/r520.c index a555b7b..f743518 100644 --- a/drivers/gpu/drm/radeon/r520.c +++ b/drivers/gpu/drm/radeon/r520.c @@ -260,6 +260,8 @@ int r520_init(struct radeon_device *rdev) } /* Initialize clocks */ radeon_get_clock_info(rdev->ddev); + /* Initialize power management */ + radeon_pm_init(rdev); /* Get vram informations */ r520_vram_info(rdev); /* Initialize memory controller (also test AGP) */ diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 35360b0..8d6bc12 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -1621,10 +1621,13 @@ int r600_init(struct radeon_device *rdev) r600_scratch_init(rdev); /* Initialize surface registers */ radeon_surface_init(rdev); + /* Initialize clocks */ radeon_get_clock_info(rdev->ddev); r = radeon_clocks_init(rdev); if (r) return r; + /* Initialize power management */ + radeon_pm_init(rdev); /* Fence driver */ r = radeon_fence_driver_init(rdev); if (r) diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index ea3efd7..9f0bd98 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -139,6 +139,10 @@ struct radeon_clock { uint32_t default_sclk; }; +/* + * Power management + */ +int radeon_pm_init(struct radeon_device *rdev); /* * Fences. @@ -622,7 +626,9 @@ struct radeon_asic { uint64_t dst_offset, unsigned num_pages, struct radeon_fence *fence); + uint32_t (*get_engine_clock)(struct radeon_device *rdev); void (*set_engine_clock)(struct radeon_device *rdev, uint32_t eng_clock); + uint32_t (*get_memory_clock)(struct radeon_device *rdev); void (*set_memory_clock)(struct radeon_device *rdev, uint32_t mem_clock); void (*set_pcie_lanes)(struct radeon_device *rdev, int lanes); void (*set_clock_gating)(struct radeon_device *rdev, int enable); @@ -953,7 +959,9 @@ static inline void radeon_ring_write(struct radeon_device *rdev, uint32_t v) #define radeon_copy_blit(rdev, s, d, np, f) (rdev)->asic->copy_blit((rdev), (s), (d), (np), (f)) #define radeon_copy_dma(rdev, s, d, np, f) (rdev)->asic->copy_dma((rdev), (s), (d), (np), (f)) #define radeon_copy(rdev, s, d, np, f) (rdev)->asic->copy((rdev), (s), (d), (np), (f)) +#define radeon_get_engine_clock(rdev) (rdev)->asic->get_engine_clock((rdev)) #define radeon_set_engine_clock(rdev, e) (rdev)->asic->set_engine_clock((rdev), (e)) +#define radeon_get_memory_clock(rdev) (rdev)->asic->get_memory_clock((rdev)) #define radeon_set_memory_clock(rdev, e) (rdev)->asic->set_engine_clock((rdev), (e)) #define radeon_set_pcie_lanes(rdev, l) (rdev)->asic->set_pcie_lanes((rdev), (l)) #define radeon_set_clock_gating(rdev, e) (rdev)->asic->set_clock_gating((rdev), (e)) diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h index d38f996..94991ed 100644 --- a/drivers/gpu/drm/radeon/radeon_asic.h +++ b/drivers/gpu/drm/radeon/radeon_asic.h @@ -31,10 +31,13 @@ /* * common functions */ +uint32_t radeon_legacy_get_engine_clock(struct radeon_device *rdev); void radeon_legacy_set_engine_clock(struct radeon_device *rdev, uint32_t eng_clock); void radeon_legacy_set_clock_gating(struct radeon_device *rdev, int enable); +uint32_t radeon_atom_get_engine_clock(struct radeon_device *rdev); void radeon_atom_set_engine_clock(struct radeon_device *rdev, uint32_t eng_clock); +uint32_t radeon_atom_get_memory_clock(struct radeon_device *rdev); void radeon_atom_set_memory_clock(struct radeon_device *rdev, uint32_t mem_clock); void radeon_atom_set_clock_gating(struct radeon_device *rdev, int enable); @@ -93,7 +96,9 @@ static struct radeon_asic r100_asic = { .copy_blit = &r100_copy_blit, .copy_dma = NULL, .copy = &r100_copy_blit, + .get_engine_clock = &radeon_legacy_get_engine_clock, .set_engine_clock = &radeon_legacy_set_engine_clock, + .get_memory_clock = NULL, .set_memory_clock = NULL, .set_pcie_lanes = NULL, .set_clock_gating = &radeon_legacy_set_clock_gating, @@ -145,7 +150,9 @@ static struct radeon_asic r300_asic = { .copy_blit = &r100_copy_blit, .copy_dma = &r300_copy_dma, .copy = &r100_copy_blit, + .get_engine_clock = &radeon_legacy_get_engine_clock, .set_engine_clock = &radeon_legacy_set_engine_clock, + .get_memory_clock = NULL, .set_memory_clock = NULL, .set_pcie_lanes = &rv370_set_pcie_lanes, .set_clock_gating = &radeon_legacy_set_clock_gating, @@ -181,7 +188,9 @@ static struct radeon_asic r420_asic = { .copy_blit = &r100_copy_blit, .copy_dma = &r300_copy_dma, .copy = &r100_copy_blit, + .get_engine_clock = &radeon_atom_get_engine_clock, .set_engine_clock = &radeon_atom_set_engine_clock, + .get_memory_clock = &radeon_atom_get_memory_clock, .set_memory_clock = &radeon_atom_set_memory_clock, .set_pcie_lanes = &rv370_set_pcie_lanes, .set_clock_gating = &radeon_atom_set_clock_gating, @@ -222,7 +231,9 @@ static struct radeon_asic rs400_asic = { .copy_blit = &r100_copy_blit, .copy_dma = &r300_copy_dma, .copy = &r100_copy_blit, + .get_engine_clock = &radeon_legacy_get_engine_clock, .set_engine_clock = &radeon_legacy_set_engine_clock, + .get_memory_clock = NULL, .set_memory_clock = NULL, .set_pcie_lanes = NULL, .set_clock_gating = &radeon_legacy_set_clock_gating, @@ -267,7 +278,9 @@ static struct radeon_asic rs600_asic = { .copy_blit = &r100_copy_blit, .copy_dma = &r300_copy_dma, .copy = &r100_copy_blit, + .get_engine_clock = &radeon_atom_get_engine_clock, .set_engine_clock = &radeon_atom_set_engine_clock, + .get_memory_clock = &radeon_atom_get_memory_clock, .set_memory_clock = &radeon_atom_set_memory_clock, .set_pcie_lanes = NULL, .set_clock_gating = &radeon_atom_set_clock_gating, @@ -305,7 +318,9 @@ static struct radeon_asic rs690_asic = { .copy_blit = &r100_copy_blit, .copy_dma = &r300_copy_dma, .copy = &r300_copy_dma, + .get_engine_clock = &radeon_atom_get_engine_clock, .set_engine_clock = &radeon_atom_set_engine_clock, + .get_memory_clock = &radeon_atom_get_memory_clock, .set_memory_clock = &radeon_atom_set_memory_clock, .set_pcie_lanes = NULL, .set_clock_gating = &radeon_atom_set_clock_gating, @@ -349,7 +364,9 @@ static struct radeon_asic rv515_asic = { .copy_blit = &r100_copy_blit, .copy_dma = &r300_copy_dma, .copy = &r100_copy_blit, + .get_engine_clock = &radeon_atom_get_engine_clock, .set_engine_clock = &radeon_atom_set_engine_clock, + .get_memory_clock = &radeon_atom_get_memory_clock, .set_memory_clock = &radeon_atom_set_memory_clock, .set_pcie_lanes = &rv370_set_pcie_lanes, .set_clock_gating = &radeon_atom_set_clock_gating, @@ -384,7 +401,9 @@ static struct radeon_asic r520_asic = { .copy_blit = &r100_copy_blit, .copy_dma = &r300_copy_dma, .copy = &r100_copy_blit, + .get_engine_clock = &radeon_atom_get_engine_clock, .set_engine_clock = &radeon_atom_set_engine_clock, + .get_memory_clock = &radeon_atom_get_memory_clock, .set_memory_clock = &radeon_atom_set_memory_clock, .set_pcie_lanes = &rv370_set_pcie_lanes, .set_clock_gating = &radeon_atom_set_clock_gating, @@ -445,7 +464,9 @@ static struct radeon_asic r600_asic = { .copy_blit = &r600_copy_blit, .copy_dma = &r600_copy_blit, .copy = &r600_copy_blit, + .get_engine_clock = &radeon_atom_get_engine_clock, .set_engine_clock = &radeon_atom_set_engine_clock, + .get_memory_clock = &radeon_atom_get_memory_clock, .set_memory_clock = &radeon_atom_set_memory_clock, .set_pcie_lanes = NULL, .set_clock_gating = &radeon_atom_set_clock_gating, @@ -481,7 +502,9 @@ static struct radeon_asic rv770_asic = { .copy_blit = &r600_copy_blit, .copy_dma = &r600_copy_blit, .copy = &r600_copy_blit, + .get_engine_clock = &radeon_atom_get_engine_clock, .set_engine_clock = &radeon_atom_set_engine_clock, + .get_memory_clock = &radeon_atom_get_memory_clock, .set_memory_clock = &radeon_atom_set_memory_clock, .set_pcie_lanes = NULL, .set_clock_gating = &radeon_atom_set_clock_gating, diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 80aacde..2ed88a8 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -1133,6 +1133,24 @@ void radeon_atom_static_pwrmgt_setup(struct radeon_device *rdev, int enable) atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); } +uint32_t radeon_atom_get_engine_clock(struct radeon_device *rdev) +{ + GET_ENGINE_CLOCK_PS_ALLOCATION args; + int index = GetIndexIntoMasterTable(COMMAND, GetEngineClock); + + atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); + return args.ulReturnEngineClock; +} + +uint32_t radeon_atom_get_memory_clock(struct radeon_device *rdev) +{ + GET_MEMORY_CLOCK_PS_ALLOCATION args; + int index = GetIndexIntoMasterTable(COMMAND, GetMemoryClock); + + atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); + return args.ulReturnMemoryClock; +} + void radeon_atom_set_engine_clock(struct radeon_device *rdev, uint32_t eng_clock) { diff --git a/drivers/gpu/drm/radeon/radeon_clocks.c b/drivers/gpu/drm/radeon/radeon_clocks.c index f5c32a7..a813541 100644 --- a/drivers/gpu/drm/radeon/radeon_clocks.c +++ b/drivers/gpu/drm/radeon/radeon_clocks.c @@ -32,7 +32,7 @@ #include "atom.h" /* 10 khz */ -static uint32_t radeon_legacy_get_engine_clock(struct radeon_device *rdev) +uint32_t radeon_legacy_get_engine_clock(struct radeon_device *rdev) { struct radeon_pll *spll = &rdev->clock.spll; uint32_t fb_div, ref_div, post_div, sclk; diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c new file mode 100644 index 0000000..46146c6 --- /dev/null +++ b/drivers/gpu/drm/radeon/radeon_pm.c @@ -0,0 +1,65 @@ +/* + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Authors: Rafał Miłecki + */ +#include "drmP.h" +#include "radeon.h" + +int radeon_debugfs_pm_init(struct radeon_device *rdev); + +int radeon_pm_init(struct radeon_device *rdev) +{ + if (radeon_debugfs_pm_init(rdev)) { + DRM_ERROR("Failed to register debugfs file for CP !\n"); + } + + return 0; +} + +/* + * Debugfs info + */ +#if defined(CONFIG_DEBUG_FS) + +static int radeon_debugfs_pm_info(struct seq_file *m, void *data) +{ + struct drm_info_node *node = (struct drm_info_node *) m->private; + struct drm_device *dev = node->minor->dev; + struct radeon_device *rdev = dev->dev_private; + + seq_printf(m, "engine clock: %u0 Hz\n", radeon_get_engine_clock(rdev)); + seq_printf(m, "memory clock: %u0 Hz\n", radeon_get_memory_clock(rdev)); + + return 0; +} + +static struct drm_info_list radeon_pm_info_list[] = { + {"radeon_pm_info", radeon_debugfs_pm_info, 0, NULL}, +}; +#endif + +int radeon_debugfs_pm_init(struct radeon_device *rdev) +{ +#if defined(CONFIG_DEBUG_FS) + return radeon_debugfs_add_files(rdev, radeon_pm_info_list, ARRAY_SIZE(radeon_pm_info_list)); +#else + return 0; +#endif +} diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c index 942754c..5f117cd 100644 --- a/drivers/gpu/drm/radeon/rs600.c +++ b/drivers/gpu/drm/radeon/rs600.c @@ -488,6 +488,8 @@ int rs600_init(struct radeon_device *rdev) } /* Initialize clocks */ radeon_get_clock_info(rdev->ddev); + /* Initialize power management */ + radeon_pm_init(rdev); /* Get vram informations */ rs600_vram_info(rdev); /* Initialize memory controller (also test AGP) */ diff --git a/drivers/gpu/drm/radeon/rs690.c b/drivers/gpu/drm/radeon/rs690.c index 025e322..2754717 100644 --- a/drivers/gpu/drm/radeon/rs690.c +++ b/drivers/gpu/drm/radeon/rs690.c @@ -706,6 +706,8 @@ int rs690_init(struct radeon_device *rdev) } /* Initialize clocks */ radeon_get_clock_info(rdev->ddev); + /* Initialize power management */ + radeon_pm_init(rdev); /* Get vram informations */ rs690_vram_info(rdev); /* Initialize memory controller (also test AGP) */ diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c index 03c052d..7935f79 100644 --- a/drivers/gpu/drm/radeon/rv515.c +++ b/drivers/gpu/drm/radeon/rv515.c @@ -587,6 +587,8 @@ int rv515_init(struct radeon_device *rdev) } /* Initialize clocks */ radeon_get_clock_info(rdev->ddev); + /* Initialize power management */ + radeon_pm_init(rdev); /* Get vram informations */ rv515_vram_info(rdev); /* Initialize memory controller (also test AGP) */ diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index ae074fd..b0efd0d 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -983,10 +983,13 @@ int rv770_init(struct radeon_device *rdev) r600_scratch_init(rdev); /* Initialize surface registers */ radeon_surface_init(rdev); + /* Initialize clocks */ radeon_get_clock_info(rdev->ddev); r = radeon_clocks_init(rdev); if (r) return r; + /* Initialize power management */ + radeon_pm_init(rdev); /* Fence driver */ r = radeon_fence_driver_init(rdev); if (r) -- cgit v0.10.2 From 2839d396e3ae0891c1fdd87aa1cea218e6f5c4df Mon Sep 17 00:00:00 2001 From: Vaibhav Verma Date: Thu, 5 Nov 2009 23:13:36 -0500 Subject: ACPI: sleep: another HP/Compaq DMI entries for init_set_sci_en_on_resume http://bugzilla.kernel.org/show_bug.cgi?id=13745 Signed-off-by: Len Brown diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index ed9760a..4cc1b81 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -421,6 +421,22 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = { }, }, { + .callback = init_set_sci_en_on_resume, + .ident = "Hewlett-Packard Pavilion dv7", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv7"), + }, + }, + { + .callback = init_set_sci_en_on_resume, + .ident = "Hewlett-Packard Compaq Presario CQ40 Notebook PC", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "Compaq Presario CQ40 Notebook PC"), + }, + }, + { .callback = init_old_suspend_ordering, .ident = "Panasonic CF51-2L", .matches = { -- cgit v0.10.2 From 4eb0c00b6221f28b8988df37c9cb1bc5a2b91b39 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 5 Nov 2009 20:24:33 -0800 Subject: sparc64: Add a comment about why we only use certain memory barriers these days. Based upon feedback from Mathieu Desnoyers. Signed-off-by: David S. Miller diff --git a/arch/sparc/include/asm/system_64.h b/arch/sparc/include/asm/system_64.h index 25e848f..d47a98e 100644 --- a/arch/sparc/include/asm/system_64.h +++ b/arch/sparc/include/asm/system_64.h @@ -63,6 +63,10 @@ do { __asm__ __volatile__("ba,pt %%xcc, 1f\n\t" \ : : : "memory"); \ } while (0) +/* The kernel always executes in TSO memory model these days, + * and furthermore most sparc64 chips implement more stringent + * memory ordering than required by the specifications. + */ #define mb() membar_safe("#StoreLoad") #define rmb() __asm__ __volatile__("":::"memory") #define wmb() __asm__ __volatile__("":::"memory") -- cgit v0.10.2 From 1056bd51674e529813213186471bb4ac6689a755 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Thu, 5 Nov 2009 20:46:52 -0800 Subject: bridge: prevent bridging wrong device The bridge code assumes ethernet addressing, so be more strict in the what is allowed. This showed up when GRE had a bug and was not using correct address format. Add some more comments for increased clarity. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c index b1b3b0f..4a9f527 100644 --- a/net/bridge/br_if.c +++ b/net/bridge/br_if.c @@ -377,12 +377,16 @@ int br_add_if(struct net_bridge *br, struct net_device *dev) struct net_bridge_port *p; int err = 0; - if (dev->flags & IFF_LOOPBACK || dev->type != ARPHRD_ETHER) + /* Don't allow bridging non-ethernet like devices */ + if ((dev->flags & IFF_LOOPBACK) || + dev->type != ARPHRD_ETHER || dev->addr_len != ETH_ALEN) return -EINVAL; + /* No bridging of bridges */ if (dev->netdev_ops->ndo_start_xmit == br_dev_xmit) return -ELOOP; + /* Device is already being bridged */ if (dev->br_port != NULL) return -EBUSY; -- cgit v0.10.2 From b4ec824021493ba6cb7eeb61572f4d2f8a80a52e Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 5 Nov 2009 20:56:07 -0800 Subject: rose: device refcount leak While hunting dev_put() for net-next-2.6, I found a device refcount leak in ROSE, ioctl(SIOCADDRT) error path. Fix is to not touch device refcount, as we hold RTNL Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/rose/rose_route.c b/net/rose/rose_route.c index 9478d9b..f3e2198 100644 --- a/net/rose/rose_route.c +++ b/net/rose/rose_route.c @@ -578,18 +578,18 @@ static int rose_clear_routes(void) /* * Check that the device given is a valid AX.25 interface that is "up". + * called whith RTNL */ -static struct net_device *rose_ax25_dev_get(char *devname) +static struct net_device *rose_ax25_dev_find(char *devname) { struct net_device *dev; - if ((dev = dev_get_by_name(&init_net, devname)) == NULL) + if ((dev = __dev_get_by_name(&init_net, devname)) == NULL) return NULL; if ((dev->flags & IFF_UP) && dev->type == ARPHRD_AX25) return dev; - dev_put(dev); return NULL; } @@ -720,27 +720,23 @@ int rose_rt_ioctl(unsigned int cmd, void __user *arg) case SIOCADDRT: if (copy_from_user(&rose_route, arg, sizeof(struct rose_route_struct))) return -EFAULT; - if ((dev = rose_ax25_dev_get(rose_route.device)) == NULL) + if ((dev = rose_ax25_dev_find(rose_route.device)) == NULL) return -EINVAL; - if (rose_dev_exists(&rose_route.address)) { /* Can't add routes to ourself */ - dev_put(dev); + if (rose_dev_exists(&rose_route.address)) /* Can't add routes to ourself */ return -EINVAL; - } if (rose_route.mask > 10) /* Mask can't be more than 10 digits */ return -EINVAL; if (rose_route.ndigis > AX25_MAX_DIGIS) return -EINVAL; err = rose_add_node(&rose_route, dev); - dev_put(dev); return err; case SIOCDELRT: if (copy_from_user(&rose_route, arg, sizeof(struct rose_route_struct))) return -EFAULT; - if ((dev = rose_ax25_dev_get(rose_route.device)) == NULL) + if ((dev = rose_ax25_dev_find(rose_route.device)) == NULL) return -EINVAL; err = rose_del_node(&rose_route, dev); - dev_put(dev); return err; case SIOCRSCLRRT: -- cgit v0.10.2 From 345e5a7672f561b539b3249cbe437b8d6595ab1b Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 5 Nov 2009 14:34:57 +0000 Subject: serial: sh-sci: disable callback typo fix Avoid invoking the disable callback in case of NULL. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 85119fb..6498bd1 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -1143,7 +1143,7 @@ static void serial_console_write(struct console *co, const char *s, while ((sci_in(port, SCxSR) & bits) != bits) cpu_relax(); - if (sci_port->disable); + if (sci_port->disable) sci_port->disable(port); } -- cgit v0.10.2 From 421b541110b20ccff1a7ff3245439cb24efe9812 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 6 Nov 2009 17:23:33 +0900 Subject: sh: unwinder: Fix up invalid PC refetch in dwarf unwinder. The dwarf unwinder presently attempts to provide a sane PC value if none is provided, however the logic is broken and cases where a previous valid dwarf frame exists along with a bogus PC value can still proceed. This fixes up the test and prevents the unwinder from blowing up. Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c index 2d07084..d76a231 100644 --- a/arch/sh/kernel/dwarf.c +++ b/arch/sh/kernel/dwarf.c @@ -555,7 +555,7 @@ struct dwarf_frame * dwarf_unwind_stack(unsigned long pc, * NOTE: the return address is guaranteed to be setup by the * time this function makes its first function call. */ - if (!pc && !prev) + if (!pc || !prev) pc = (unsigned long)current_text_addr(); #ifdef CONFIG_FUNCTION_GRAPH_TRACER -- cgit v0.10.2 From f5209b4446d185cc95f46363f8043a743530c15a Mon Sep 17 00:00:00 2001 From: Sathya Perla Date: Fri, 6 Nov 2009 00:31:01 -0800 Subject: be2net: Fix CQE_STATUS_EXTD_SHIFT define Signed-off-by: Sathya Perla Signed-off-by: David S. Miller diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/benet/be_cmds.h index 4995378..e5f9676 100644 --- a/drivers/net/benet/be_cmds.h +++ b/drivers/net/benet/be_cmds.h @@ -68,7 +68,7 @@ enum { #define CQE_STATUS_COMPL_MASK 0xFFFF #define CQE_STATUS_COMPL_SHIFT 0 /* bits 0 - 15 */ #define CQE_STATUS_EXTD_MASK 0xFFFF -#define CQE_STATUS_EXTD_SHIFT 0 /* bits 0 - 15 */ +#define CQE_STATUS_EXTD_SHIFT 16 /* bits 16 - 31 */ struct be_mcc_compl { u32 status; /* dword 0 */ -- cgit v0.10.2 From f9dd09c7f7199685601d75882447a6598be8a3e0 Mon Sep 17 00:00:00 2001 From: Jozsef Kadlecsik Date: Fri, 6 Nov 2009 00:43:42 -0800 Subject: netfilter: nf_nat: fix NAT issue in 2.6.30.4+ Vitezslav Samel discovered that since 2.6.30.4+ active FTP can not work over NAT. The "cause" of the problem was a fix of unacknowledged data detection with NAT (commit a3a9f79e361e864f0e9d75ebe2a0cb43d17c4272). However, actually, that fix uncovered a long standing bug in TCP conntrack: when NAT was enabled, we simply updated the max of the right edge of the segments we have seen (td_end), by the offset NAT produced with changing IP/port in the data. However, we did not update the other parameter (td_maxend) which is affected by the NAT offset. Thus that could drift away from the correct value and thus resulted breaking active FTP. The patch below fixes the issue by *not* updating the conntrack parameters from NAT, but instead taking into account the NAT offsets in conntrack in a consistent way. (Updating from NAT would be more harder and expensive because it'd need to re-calculate parameters we already calculated in conntrack.) Signed-off-by: Jozsef Kadlecsik Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller diff --git a/include/net/netfilter/nf_conntrack.h b/include/net/netfilter/nf_conntrack.h index cbdd628..5cf7270 100644 --- a/include/net/netfilter/nf_conntrack.h +++ b/include/net/netfilter/nf_conntrack.h @@ -255,11 +255,9 @@ static inline bool nf_ct_kill(struct nf_conn *ct) } /* These are for NAT. Icky. */ -/* Update TCP window tracking data when NAT mangles the packet */ -extern void nf_conntrack_tcp_update(const struct sk_buff *skb, - unsigned int dataoff, - struct nf_conn *ct, int dir, - s16 offset); +extern s16 (*nf_ct_nat_offset)(const struct nf_conn *ct, + enum ip_conntrack_dir dir, + u32 seq); /* Fake conntrack entry for untracked connections */ extern struct nf_conn nf_conntrack_untracked; diff --git a/include/net/netfilter/nf_nat_helper.h b/include/net/netfilter/nf_nat_helper.h index 237a961..4222220 100644 --- a/include/net/netfilter/nf_nat_helper.h +++ b/include/net/netfilter/nf_nat_helper.h @@ -32,4 +32,8 @@ extern int (*nf_nat_seq_adjust_hook)(struct sk_buff *skb, * to port ct->master->saved_proto. */ extern void nf_nat_follow_master(struct nf_conn *ct, struct nf_conntrack_expect *this); + +extern s16 nf_nat_get_offset(const struct nf_conn *ct, + enum ip_conntrack_dir dir, + u32 seq); #endif diff --git a/net/ipv4/netfilter/nf_nat_core.c b/net/ipv4/netfilter/nf_nat_core.c index 68afc6e..fe1a644 100644 --- a/net/ipv4/netfilter/nf_nat_core.c +++ b/net/ipv4/netfilter/nf_nat_core.c @@ -750,6 +750,8 @@ static int __init nf_nat_init(void) BUG_ON(nfnetlink_parse_nat_setup_hook != NULL); rcu_assign_pointer(nfnetlink_parse_nat_setup_hook, nfnetlink_parse_nat_setup); + BUG_ON(nf_ct_nat_offset != NULL); + rcu_assign_pointer(nf_ct_nat_offset, nf_nat_get_offset); return 0; cleanup_extend: @@ -764,6 +766,7 @@ static void __exit nf_nat_cleanup(void) nf_ct_extend_unregister(&nat_extend); rcu_assign_pointer(nf_nat_seq_adjust_hook, NULL); rcu_assign_pointer(nfnetlink_parse_nat_setup_hook, NULL); + rcu_assign_pointer(nf_ct_nat_offset, NULL); synchronize_net(); } diff --git a/net/ipv4/netfilter/nf_nat_helper.c b/net/ipv4/netfilter/nf_nat_helper.c index 09172a6..f9520fa 100644 --- a/net/ipv4/netfilter/nf_nat_helper.c +++ b/net/ipv4/netfilter/nf_nat_helper.c @@ -73,6 +73,28 @@ adjust_tcp_sequence(u32 seq, DUMP_OFFSET(this_way); } +/* Get the offset value, for conntrack */ +s16 nf_nat_get_offset(const struct nf_conn *ct, + enum ip_conntrack_dir dir, + u32 seq) +{ + struct nf_conn_nat *nat = nfct_nat(ct); + struct nf_nat_seq *this_way; + s16 offset; + + if (!nat) + return 0; + + this_way = &nat->seq[dir]; + spin_lock_bh(&nf_nat_seqofs_lock); + offset = after(seq, this_way->correction_pos) + ? this_way->offset_after : this_way->offset_before; + spin_unlock_bh(&nf_nat_seqofs_lock); + + return offset; +} +EXPORT_SYMBOL_GPL(nf_nat_get_offset); + /* Frobs data inside this packet, which is linear. */ static void mangle_contents(struct sk_buff *skb, unsigned int dataoff, @@ -189,11 +211,6 @@ nf_nat_mangle_tcp_packet(struct sk_buff *skb, adjust_tcp_sequence(ntohl(tcph->seq), (int)rep_len - (int)match_len, ct, ctinfo); - /* Tell TCP window tracking about seq change */ - nf_conntrack_tcp_update(skb, ip_hdrlen(skb), - ct, CTINFO2DIR(ctinfo), - (int)rep_len - (int)match_len); - nf_conntrack_event_cache(IPCT_NATSEQADJ, ct); } return 1; @@ -415,12 +432,7 @@ nf_nat_seq_adjust(struct sk_buff *skb, tcph->seq = newseq; tcph->ack_seq = newack; - if (!nf_nat_sack_adjust(skb, tcph, ct, ctinfo)) - return 0; - - nf_conntrack_tcp_update(skb, ip_hdrlen(skb), ct, dir, seqoff); - - return 1; + return nf_nat_sack_adjust(skb, tcph, ct, ctinfo); } /* Setup NAT on this expected conntrack so it follows master. */ diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index 7c9ec3d..0cdfb38 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -1350,6 +1350,11 @@ err_stat: return ret; } +s16 (*nf_ct_nat_offset)(const struct nf_conn *ct, + enum ip_conntrack_dir dir, + u32 seq); +EXPORT_SYMBOL_GPL(nf_ct_nat_offset); + int nf_conntrack_init(struct net *net) { int ret; @@ -1367,6 +1372,9 @@ int nf_conntrack_init(struct net *net) /* For use by REJECT target */ rcu_assign_pointer(ip_ct_attach, nf_conntrack_attach); rcu_assign_pointer(nf_ct_destroy, destroy_conntrack); + + /* Howto get NAT offsets */ + rcu_assign_pointer(nf_ct_nat_offset, NULL); } return 0; diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c index 97a82ba..ba2b769 100644 --- a/net/netfilter/nf_conntrack_proto_tcp.c +++ b/net/netfilter/nf_conntrack_proto_tcp.c @@ -492,6 +492,21 @@ static void tcp_sack(const struct sk_buff *skb, unsigned int dataoff, } } +#ifdef CONFIG_NF_NAT_NEEDED +static inline s16 nat_offset(const struct nf_conn *ct, + enum ip_conntrack_dir dir, + u32 seq) +{ + typeof(nf_ct_nat_offset) get_offset = rcu_dereference(nf_ct_nat_offset); + + return get_offset != NULL ? get_offset(ct, dir, seq) : 0; +} +#define NAT_OFFSET(pf, ct, dir, seq) \ + (pf == NFPROTO_IPV4 ? nat_offset(ct, dir, seq) : 0) +#else +#define NAT_OFFSET(pf, ct, dir, seq) 0 +#endif + static bool tcp_in_window(const struct nf_conn *ct, struct ip_ct_tcp *state, enum ip_conntrack_dir dir, @@ -506,6 +521,7 @@ static bool tcp_in_window(const struct nf_conn *ct, struct ip_ct_tcp_state *receiver = &state->seen[!dir]; const struct nf_conntrack_tuple *tuple = &ct->tuplehash[dir].tuple; __u32 seq, ack, sack, end, win, swin; + s16 receiver_offset; bool res; /* @@ -519,11 +535,16 @@ static bool tcp_in_window(const struct nf_conn *ct, if (receiver->flags & IP_CT_TCP_FLAG_SACK_PERM) tcp_sack(skb, dataoff, tcph, &sack); + /* Take into account NAT sequence number mangling */ + receiver_offset = NAT_OFFSET(pf, ct, !dir, ack - 1); + ack -= receiver_offset; + sack -= receiver_offset; + pr_debug("tcp_in_window: START\n"); pr_debug("tcp_in_window: "); nf_ct_dump_tuple(tuple); - pr_debug("seq=%u ack=%u sack=%u win=%u end=%u\n", - seq, ack, sack, win, end); + pr_debug("seq=%u ack=%u+(%d) sack=%u+(%d) win=%u end=%u\n", + seq, ack, receiver_offset, sack, receiver_offset, win, end); pr_debug("tcp_in_window: sender end=%u maxend=%u maxwin=%u scale=%i " "receiver end=%u maxend=%u maxwin=%u scale=%i\n", sender->td_end, sender->td_maxend, sender->td_maxwin, @@ -613,8 +634,8 @@ static bool tcp_in_window(const struct nf_conn *ct, pr_debug("tcp_in_window: "); nf_ct_dump_tuple(tuple); - pr_debug("seq=%u ack=%u sack =%u win=%u end=%u\n", - seq, ack, sack, win, end); + pr_debug("seq=%u ack=%u+(%d) sack=%u+(%d) win=%u end=%u\n", + seq, ack, receiver_offset, sack, receiver_offset, win, end); pr_debug("tcp_in_window: sender end=%u maxend=%u maxwin=%u scale=%i " "receiver end=%u maxend=%u maxwin=%u scale=%i\n", sender->td_end, sender->td_maxend, sender->td_maxwin, @@ -700,7 +721,7 @@ static bool tcp_in_window(const struct nf_conn *ct, before(seq, sender->td_maxend + 1) ? after(end, sender->td_end - receiver->td_maxwin - 1) ? before(sack, receiver->td_end + 1) ? - after(ack, receiver->td_end - MAXACKWINDOW(sender)) ? "BUG" + after(sack, receiver->td_end - MAXACKWINDOW(sender) - 1) ? "BUG" : "ACK is under the lower bound (possible overly delayed ACK)" : "ACK is over the upper bound (ACKed data not seen yet)" : "SEQ is under the lower bound (already ACKed data retransmitted)" @@ -715,39 +736,6 @@ static bool tcp_in_window(const struct nf_conn *ct, return res; } -#ifdef CONFIG_NF_NAT_NEEDED -/* Update sender->td_end after NAT successfully mangled the packet */ -/* Caller must linearize skb at tcp header. */ -void nf_conntrack_tcp_update(const struct sk_buff *skb, - unsigned int dataoff, - struct nf_conn *ct, int dir, - s16 offset) -{ - const struct tcphdr *tcph = (const void *)skb->data + dataoff; - const struct ip_ct_tcp_state *sender = &ct->proto.tcp.seen[dir]; - const struct ip_ct_tcp_state *receiver = &ct->proto.tcp.seen[!dir]; - __u32 end; - - end = segment_seq_plus_len(ntohl(tcph->seq), skb->len, dataoff, tcph); - - spin_lock_bh(&ct->lock); - /* - * We have to worry for the ack in the reply packet only... - */ - if (ct->proto.tcp.seen[dir].td_end + offset == end) - ct->proto.tcp.seen[dir].td_end = end; - ct->proto.tcp.last_end = end; - spin_unlock_bh(&ct->lock); - pr_debug("tcp_update: sender end=%u maxend=%u maxwin=%u scale=%i " - "receiver end=%u maxend=%u maxwin=%u scale=%i\n", - sender->td_end, sender->td_maxend, sender->td_maxwin, - sender->td_scale, - receiver->td_end, receiver->td_maxend, receiver->td_maxwin, - receiver->td_scale); -} -EXPORT_SYMBOL_GPL(nf_conntrack_tcp_update); -#endif - #define TH_FIN 0x01 #define TH_SYN 0x02 #define TH_RST 0x04 -- cgit v0.10.2 From 887e671f324d9898aaedb29a6ece6c853c394067 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 6 Nov 2009 00:50:39 -0800 Subject: decnet: netdevice refcount leak While working on device refcount stuff, I found a device refcount leak through DECNET. This nasty bug can be used to hold refcounts on any !DECNET netdevice. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/decnet/sysctl_net_decnet.c b/net/decnet/sysctl_net_decnet.c index 26b0ab1..2036568 100644 --- a/net/decnet/sysctl_net_decnet.c +++ b/net/decnet/sysctl_net_decnet.c @@ -263,11 +263,10 @@ static int dn_def_dev_strategy(ctl_table *table, return -ENODEV; rv = -ENODEV; - if (dev->dn_ptr != NULL) { + if (dev->dn_ptr != NULL) rv = dn_dev_set_default(dev, 1); - if (rv) - dev_put(dev); - } + if (rv) + dev_put(dev); } return rv; -- cgit v0.10.2 From ba230c3f6dc88ec008806adb27b12088486d508e Mon Sep 17 00:00:00 2001 From: Mingming Date: Fri, 6 Nov 2009 04:01:23 -0500 Subject: ext4: Fix return value of ext4_split_unwritten_extents() to fix direct I/O To prepare for a direct I/O write, we need to split the unwritten extents before submitting the I/O. When no extents needed to be split, ext4_split_unwritten_extents() was incorrectly returning 0 instead of the size of uninitialized extents. This bug caused the wrong return value sent back to VFS code when it gets called from async IO path, leading to an unnecessary fall back to buffered IO. This bug also hid the fact that the check to see whether or not a split would be necessary was incorrect; we can only skip splitting the extent if the write completely covers the uninitialized extent. Signed-off-by: Mingming Cao Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index e991ae2..715264b 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -2807,6 +2807,8 @@ fix_extent_len: * into three uninitialized extent(at most). After IO complete, the part * being filled will be convert to initialized by the end_io callback function * via ext4_convert_unwritten_extents(). + * + * Returns the size of uninitialized extent to be written on success. */ static int ext4_split_unwritten_extents(handle_t *handle, struct inode *inode, @@ -2824,7 +2826,6 @@ static int ext4_split_unwritten_extents(handle_t *handle, unsigned int allocated, ee_len, depth; ext4_fsblk_t newblock; int err = 0; - int ret = 0; ext_debug("ext4_split_unwritten_extents: inode %lu," "iblock %llu, max_blocks %u\n", inode->i_ino, @@ -2842,12 +2843,12 @@ static int ext4_split_unwritten_extents(handle_t *handle, ext4_ext_store_pblock(&orig_ex, ext_pblock(ex)); /* - * if the entire unintialized extent length less than - * the size of extent to write, there is no need to split - * uninitialized extent + * If the uninitialized extent begins at the same logical + * block where the write begins, and the write completely + * covers the extent, then we don't need to split it. */ - if (allocated <= max_blocks) - return ret; + if ((iblock == ee_block) && (allocated <= max_blocks)) + return allocated; err = ext4_ext_get_access(handle, inode, path + depth); if (err) -- cgit v0.10.2 From 0fb18c4777ff424c1db694af98443a201fa4fc30 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 6 Nov 2009 04:52:50 -0800 Subject: Revert "ide: try to use PIO Mode 0 during probe if possible" This reverts commit 6029336426a2b43e4bc6f4a84be8789a047d139e. Ok, we really do need to revert this, even with Bart's sis5513.c fix in there. The problem is that several driver's ->set_pio_mode() method depends upon the drive->media type being set properly. Most of them use this to enable prefetching, which can only be done for disk media. But the commit being reverted here calls ->set_pio_mode() before it's setup. Actually it considers everything disk because that is the default media type set by ide_port_init_devices_data(). The set of drivers that depend upon the media type in their ->set_pio_method() are: drivers/ide/alim15x3.c drivers/ide/it8172.c drivers/ide/it8213.c drivers/ide/pdc202xx_old.c drivers/ide/piix.c drivers/ide/qd65xx.c drivers/ide/sis5513.c drivers/ide/slc90e66.c And it is possible that we could fix this by guarding the prefetching and other media dependent setting changes with a test on IDE_PFLAG_PROBING in hwif->port_flags, that's simply too risky for 2.6.32-rcX and -stable. Signed-off-by: David S. Miller diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 63c53d6..4d76ba4 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -1046,15 +1046,6 @@ static void ide_port_init_devices(ide_hwif_t *hwif) if (port_ops && port_ops->init_dev) port_ops->init_dev(drive); } - - ide_port_for_each_dev(i, drive, hwif) { - /* - * default to PIO Mode 0 before we figure out - * the most suited mode for the attached device - */ - if (port_ops && port_ops->set_pio_mode) - port_ops->set_pio_mode(drive, 0); - } } static void ide_init_port(ide_hwif_t *hwif, unsigned int port, -- cgit v0.10.2 From 4d187fb830a7aa8afb471124abe41b04caf49401 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Wed, 21 Oct 2009 23:10:03 +0200 Subject: ASoC: OMAP: Don't try to set unsupported OMAP_DMA_DATA_BURST_16 on OMAP1 After DMA burst mode has been introduced in sound/soc/omap/omap-pcm.c, omap_pcm_prepare() unconditionally calls: omap_set_dma_src_burst_mode(prtd->dma_ch, OMAP_DMA_DATA_BURST_16); omap_set_dma_dest_burst_mode(prtd->dma_ch, OMAP_DMA_DATA_BURST_16); Current implementation of those two functions found in arch/arm/plat-ompa/dma.c doesn't support OMAP_DMA_DATA_BURST_16 on OMAP1 at all, so they both end with BUG() on that machine. That results in ASoC being completely unusable, at least on my OMAP5910 based Amstrad Delta. The patch corrects the problem by not calling those two functions when run on OMAP1 class based machines. Created against linux-2.6.32-rc5. Tested on Amstrad Delta. Signed-off-by: Janusz Krzysztofik Acked-by: Jarkko Nikula Signed-off-by: Mark Brown diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c index 5735945..6a829ee 100644 --- a/sound/soc/omap/omap-pcm.c +++ b/sound/soc/omap/omap-pcm.c @@ -195,8 +195,12 @@ static int omap_pcm_prepare(struct snd_pcm_substream *substream) else omap_enable_dma_irq(prtd->dma_ch, OMAP_DMA_FRAME_IRQ); - omap_set_dma_src_burst_mode(prtd->dma_ch, OMAP_DMA_DATA_BURST_16); - omap_set_dma_dest_burst_mode(prtd->dma_ch, OMAP_DMA_DATA_BURST_16); + if (!(cpu_class_is_omap1())) { + omap_set_dma_src_burst_mode(prtd->dma_ch, + OMAP_DMA_DATA_BURST_16); + omap_set_dma_dest_burst_mode(prtd->dma_ch, + OMAP_DMA_DATA_BURST_16); + } return 0; } -- cgit v0.10.2 From 6fc786d5034ed7ce2d43c459211137de6d99dd28 Mon Sep 17 00:00:00 2001 From: Jassi Brar Date: Fri, 6 Nov 2009 18:00:24 +0900 Subject: ASoC: S3C64XX I2S: Enable audio-bus clock Added the missing clk_enable after acquiring the 'audio-bus' clock. Signed-off-by: Jassi Brar Signed-off-by: Mark Brown diff --git a/sound/soc/s3c24xx/s3c64xx-i2s.c b/sound/soc/s3c24xx/s3c64xx-i2s.c index 3c06c40..105a77e 100644 --- a/sound/soc/s3c24xx/s3c64xx-i2s.c +++ b/sound/soc/s3c24xx/s3c64xx-i2s.c @@ -220,6 +220,8 @@ static __devinit int s3c64xx_iis_dev_probe(struct platform_device *pdev) goto err; } + clk_enable(i2s->iis_cclk); + ret = s3c_i2sv2_probe(pdev, dai, i2s, 0); if (ret) goto err_clk; -- cgit v0.10.2 From 143d40f3ab8fbd8ca2fe712ec8e072d687142804 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Fri, 6 Nov 2009 12:58:20 -0500 Subject: Revert "ipw2200: fix oops on missing firmware" This reverts commit e6c5fc53d0f44a772398402ee8a1879818e42b4e. Based on this regression report: Date: Thu, 05 Nov 2009 15:59:16 +0100 From: Holger Schurig To: linux-wireless@vger.kernel.org Subject: BUG: oops when "rmmod ipw2200" This happened on wireless-testing v2.6.32-rc6-41575-g5e68bfb. I modprobed ipw2200, put it into monitor mode, used tshark a while to monitor, then I stopped tshark, "ifconfig eth2 down" and finally "rmmod ipw2200", and voila: [ 917.189620] ------------[ cut here ]------------ [ 917.189717] kernel BUG at net/wireless/core.c:543! [ 917.189805] invalid opcode: 0000 [#1] PREEMPT SMP [ 917.190002] last sysfs file: /sys/devices/pci0000:00/0000:00:1e.0/0000:02:0d.0/firmware/0000:02:0d.0/loading [ 917.190136] Modules linked in: lib80211_crypt_wep ipw2200(-) libipw lib80211 ath5k mac80211 ath cfg80211 psmouse uhci_hcd [ 917.190680] [ 917.190759] Pid: 1763, comm: rmmod Not tainted (2.6.32-rc6-wl #26) Amilo M1425 [ 917.190886] EIP: 0060:[] EFLAGS: 00010202 CPU: 0 [ 917.190992] EIP is at wiphy_unregister+0xd3/0x175 [cfg80211] [ 917.191083] EAX: f601d4c4 EBX: 00000000 ECX: 00000000 EDX: f79e8600 [ 917.191176] ESI: f601d400 EDI: f95b4350 EBP: f6009eb4 ESP: f6009e8c [ 917.191269] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 917.191360] Process rmmod (pid: 1763, ti=f6008000 task=f79e8130 task.ti=f6008000) [ 917.191486] Stack: [ 917.191562] f601d5a0 f601d484 f6460e98 f6009ea0 c01407ee f6009eb8 00000246 f64604c0 [ 917.191916] <0> f6460e5c f95b4350 f6009ec0 f94fd030 f6460e98 f6009edc f95a9d4f f787bc00 [ 917.192100] <0> f787bc58 f787bc00 f95b4350 f95b4350 f6009ee8 c0207fca f787bc58 f6009ef8 [ 917.192100] Call Trace: [ 917.192100] [] ? trace_hardirqs_on+0xb/0xd [ 917.192100] [] ? unregister_ieee80211+0xe/0x27 [libipw] [ 917.192100] [] ? ipw_pci_remove+0x59/0x227 [ipw2200] [ 917.192100] [] ? pci_device_remove+0x19/0x39 [ 917.192100] [] ? __device_release_driver+0x59/0x9d [ 917.192100] [] ? driver_detach+0x67/0x85 [ 917.192100] [] ? bus_remove_driver+0x69/0x85 [ 917.192100] [] ? driver_unregister+0x4d/0x54 [ 917.192100] [] ? pci_unregister_driver+0x28/0x71 [ 917.192100] [] ? ipw_exit+0x1c/0x1e [ipw2200] [ 917.192100] [] ? sys_delete_module+0x192/0x1ef [ 917.192100] [] ? remove_vma+0x52/0x58 [ 917.192100] [] ? sysenter_exit+0xf/0x18 [ 917.192100] [] ? sysenter_do_call+0x12/0x36 [ 917.192100] Code: 74 07 e8 81 bc 8c c7 eb c8 8d 55 e0 89 f8 e8 d6 6d 66 c7 8b 45 dc 31 d2 e8 81 cc 8c c7 8d 86 c4 00 00 00 39 86 c4 00 00 00 74 04 <0f> 0b eb fe 8b 45 dc 8d 5e 0c e8 5a cc 8c c7 8b 86 94 03 00 00 [ 917.192100] EIP: [] wiphy_unregister+0xd3/0x175 [cfg80211] SS:ESP 0068:f6009e8c [ 917.203718] ---[ end trace bcaaf449945a5100 ]--- Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c index a741d37..240cff1 100644 --- a/drivers/net/wireless/ipw2x00/ipw2100.c +++ b/drivers/net/wireless/ipw2x00/ipw2100.c @@ -6325,10 +6325,8 @@ static int ipw2100_pci_init_one(struct pci_dev *pci_dev, fail: if (dev) { - if (registered) { - unregister_ieee80211(priv->ieee); + if (registered) unregister_netdev(dev); - } ipw2100_hw_stop_adapter(priv); @@ -6385,7 +6383,6 @@ static void __devexit ipw2100_pci_remove_one(struct pci_dev *pci_dev) /* Unregister the device first - this results in close() * being called if the device is open. If we free storage * first, then close() will crash. */ - unregister_ieee80211(priv->ieee); unregister_netdev(dev); /* ipw2100_down will ensure that there is no more pending work diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c index 04341a2a..8d58e6e 100644 --- a/drivers/net/wireless/ipw2x00/ipw2200.c +++ b/drivers/net/wireless/ipw2x00/ipw2200.c @@ -11821,7 +11821,6 @@ static int __devinit ipw_pci_probe(struct pci_dev *pdev, if (err) { IPW_ERROR("Failed to register promiscuous network " "device (error %d).\n", err); - unregister_ieee80211(priv->ieee); unregister_netdev(priv->net_dev); goto out_remove_sysfs; } @@ -11872,7 +11871,6 @@ static void __devexit ipw_pci_remove(struct pci_dev *pdev) mutex_unlock(&priv->mutex); - unregister_ieee80211(priv->ieee); unregister_netdev(priv->net_dev); if (priv->rxq) { diff --git a/drivers/net/wireless/ipw2x00/libipw.h b/drivers/net/wireless/ipw2x00/libipw.h index f42ade6..bf45391 100644 --- a/drivers/net/wireless/ipw2x00/libipw.h +++ b/drivers/net/wireless/ipw2x00/libipw.h @@ -1020,7 +1020,6 @@ static inline int libipw_is_cck_rate(u8 rate) /* ieee80211.c */ extern void free_ieee80211(struct net_device *dev, int monitor); extern struct net_device *alloc_ieee80211(int sizeof_priv, int monitor); -extern void unregister_ieee80211(struct libipw_device *ieee); extern int libipw_change_mtu(struct net_device *dev, int new_mtu); extern void libipw_networks_age(struct libipw_device *ieee, diff --git a/drivers/net/wireless/ipw2x00/libipw_module.c b/drivers/net/wireless/ipw2x00/libipw_module.c index be5b809..a0e9f6a 100644 --- a/drivers/net/wireless/ipw2x00/libipw_module.c +++ b/drivers/net/wireless/ipw2x00/libipw_module.c @@ -235,19 +235,16 @@ void free_ieee80211(struct net_device *dev, int monitor) libipw_networks_free(ieee); /* free cfg80211 resources */ - if (!monitor) + if (!monitor) { + wiphy_unregister(ieee->wdev.wiphy); + kfree(ieee->a_band.channels); + kfree(ieee->bg_band.channels); wiphy_free(ieee->wdev.wiphy); + } free_netdev(dev); } -void unregister_ieee80211(struct libipw_device *ieee) -{ - wiphy_unregister(ieee->wdev.wiphy); - kfree(ieee->a_band.channels); - kfree(ieee->bg_band.channels); -} - #ifdef CONFIG_LIBIPW_DEBUG static int debug = 0; @@ -333,4 +330,3 @@ module_init(libipw_init); EXPORT_SYMBOL(alloc_ieee80211); EXPORT_SYMBOL(free_ieee80211); -EXPORT_SYMBOL(unregister_ieee80211); -- cgit v0.10.2 From 66f84d6594729c866c0c03fe97159a987dad7d84 Mon Sep 17 00:00:00 2001 From: Sean Cross Date: Thu, 5 Nov 2009 20:22:03 +0100 Subject: rt2x00: Don't queue ieee80211 work after USB removal MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This prevents the rt2x00 driver from queueing ieee80211 work after the   USB card has been removed, preventing a kernel panic. Signed-off-by: Sean Cross Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 71761b3..73bbec5 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -815,6 +815,8 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev) mutex_init(&rt2x00dev->csr_mutex); + set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags); + /* * Make room for rt2x00_intf inside the per-interface * structure ieee80211_vif. @@ -871,8 +873,6 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev) rt2x00leds_register(rt2x00dev); rt2x00debug_register(rt2x00dev); - set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags); - return 0; exit: diff --git a/drivers/net/wireless/rt2x00/rt2x00link.c b/drivers/net/wireless/rt2x00/rt2x00link.c index c64db0b..c708d0b 100644 --- a/drivers/net/wireless/rt2x00/rt2x00link.c +++ b/drivers/net/wireless/rt2x00/rt2x00link.c @@ -362,8 +362,9 @@ void rt2x00link_start_tuner(struct rt2x00_dev *rt2x00dev) rt2x00link_reset_tuner(rt2x00dev, false); - ieee80211_queue_delayed_work(rt2x00dev->hw, - &link->work, LINK_TUNE_INTERVAL); + if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) + ieee80211_queue_delayed_work(rt2x00dev->hw, + &link->work, LINK_TUNE_INTERVAL); } void rt2x00link_stop_tuner(struct rt2x00_dev *rt2x00dev) @@ -469,8 +470,10 @@ static void rt2x00link_tuner(struct work_struct *work) * Increase tuner counter, and reschedule the next link tuner run. */ link->count++; - ieee80211_queue_delayed_work(rt2x00dev->hw, - &link->work, LINK_TUNE_INTERVAL); + + if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) + ieee80211_queue_delayed_work(rt2x00dev->hw, + &link->work, LINK_TUNE_INTERVAL); } void rt2x00link_register(struct rt2x00_dev *rt2x00dev) diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index 5015448..f02b48a 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -47,6 +47,8 @@ int rt2x00usb_vendor_request(struct rt2x00_dev *rt2x00dev, (requesttype == USB_VENDOR_REQUEST_IN) ? usb_rcvctrlpipe(usb_dev, 0) : usb_sndctrlpipe(usb_dev, 0); + if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) + return -ENODEV; for (i = 0; i < REGISTER_BUSY_COUNT; i++) { status = usb_control_msg(usb_dev, pipe, request, requesttype, @@ -60,8 +62,10 @@ int rt2x00usb_vendor_request(struct rt2x00_dev *rt2x00dev, * -ENODEV: Device has disappeared, no point continuing. * All other errors: Try again. */ - else if (status == -ENODEV) + else if (status == -ENODEV) { + clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags); break; + } } ERROR(rt2x00dev, @@ -161,6 +165,9 @@ int rt2x00usb_regbusy_read(struct rt2x00_dev *rt2x00dev, { unsigned int i; + if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) + return -ENODEV; + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { rt2x00usb_register_read_lock(rt2x00dev, offset, reg); if (!rt2x00_get_field32(*reg, field)) -- cgit v0.10.2 From 761434a318a64bf521f8abcc920e1d9837640fa2 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Fri, 6 Nov 2009 16:22:44 +0900 Subject: PCI ASPM: fix oops on root port removal Fix the following BUG_ON() problem reported by Alex Chiang. This problem happened when removing PCIe root port using PCI logical hotplug operation. The immediate cause of this problem is that the pointer to invalid data structure is passed to pcie_update_aspm_capable() by pcie_aspm_exit_link_state(). When pcie_aspm_exit_link_state() received a pointer to root port link, it unconfigures the root port link and frees its data structure at first. At this point, there are not links to configure under the root port and the data structure for root port link is already freed. So pcie_aspm_exit_link_state() must not call pcie_update_aspm_capable() and pcie_config_aspm_path(). This patch fixes the problem by changing pcie_aspm_exit_link_state() not to call pcie_update_aspm_capable() and pcie_config_aspm_path() if the specified link is root port link. ------------[ cut here ]------------ kernel BUG at drivers/pci/pcie/aspm.c:606! invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC last sysfs file: /sys/devices/pci0000:40/0000:40:13.0/remove CPU 1 Modules linked in: shpchp Pid: 9345, comm: sysfsd Not tainted 2.6.32-rc5 #98 ProLiant DL785 G6 RIP: 0010:[] [] pcie_update_aspm_capable+0x15/0xbe RSP: 0018:ffff88082a2f5ca0 EFLAGS: 00010202 RAX: 0000000000000e77 RBX: ffff88182cc3e000 RCX: ffff88082a33d006 RDX: 0000000000000001 RSI: ffffffff811dff4a RDI: ffff88182cc3e000 RBP: ffff88082a2f5cc0 R08: ffff88182cc3e000 R09: 0000000000000000 R10: ffff88182fc00180 R11: ffff88182fc00198 R12: ffff88182cc3e000 R13: 0000000000000000 R14: ffff88182cc3e000 R15: ffff88082a2f5e20 FS: 00007f259a64b6f0(0000) GS:ffff880864600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 00007feb53f73da0 CR3: 000000102cc94000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process sysfsd (pid: 9345, threadinfo ffff88082a2f4000, task ffff88082a33cf00) Stack: ffff88182cc3e000 ffff88182cc3e000 0000000000000000 ffff88082a33cf00 <0> ffff88082a2f5cf0 ffffffff811dff52 ffff88082a2f5cf0 ffff88082c525168 <0> ffff88402c9fd2f8 ffff88402c9fd2f8 ffff88082a2f5d20 ffffffff811d7db2 Call Trace: [] pcie_aspm_exit_link_state+0xf5/0x11e [] pci_stop_bus_device+0x76/0x7e [] pci_stop_bus_device+0x2b/0x7e [] pci_remove_bus_device+0x15/0xb9 [] remove_callback+0x29/0x3a [] sysfs_schedule_callback_work+0x15/0x6d [] worker_thread+0x19d/0x298 [] ? worker_thread+0x148/0x298 [] ? sysfs_schedule_callback_work+0x0/0x6d [] ? autoremove_wake_function+0x0/0x38 [] ? worker_thread+0x0/0x298 [] kthread+0x7d/0x85 [] child_rip+0xa/0x20 [] ? restore_args+0x0/0x30 [] ? kthread+0x0/0x85 [] ? child_rip+0x0/0x20 Code: 89 e5 8a 50 48 31 c0 c0 ea 03 83 e2 07 e8 b2 de fe ff c9 48 98 c3 55 48 89 e5 41 56 49 89 fe 41 55 41 54 53 48 83 7f 10 00 74 04 <0f> 0b eb fe 48 8b 05 da 7d 63 00 4c 8d 60 e8 4c 89 e1 eb 24 4c RIP [] pcie_update_aspm_capable+0x15/0xbe RSP ---[ end trace 6ae0f65bdeab8555 ]--- Reported-by: Alex Chiang Signed-off-by: Kenji Kaneshige Tested-by: Alex Chiang Signed-off-by: Jesse Barnes diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index 745402e..5b7056c 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -656,8 +656,10 @@ void pcie_aspm_exit_link_state(struct pci_dev *pdev) free_link_state(link); /* Recheck latencies and configure upstream links */ - pcie_update_aspm_capable(root); - pcie_config_aspm_path(parent_link); + if (parent_link) { + pcie_update_aspm_capable(root); + pcie_config_aspm_path(parent_link); + } out: mutex_unlock(&aspm_lock); up_read(&pci_bus_sem); -- cgit v0.10.2 From ec06aedd44541129840ed52e6165afa3796a27bf Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 6 Nov 2009 14:18:29 -0500 Subject: cifs: clean up handling when server doesn't consistently support inode numbers It's possible that a server will return a valid FileID when we query the FILE_INTERNAL_INFO for the root inode, but then zeroed out inode numbers when we do a FindFile with an infolevel of SMB_FIND_FILE_ID_FULL_DIR_INFO. In this situation turn off querying for server inode numbers, generate a warning for the user and just generate an inode number using iunique. Once we generate any inode number with iunique we can no longer use any server inode numbers or we risk collisions, so ensure that we don't do that in cifs_get_inode_info either. Cc: Stable Reported-by: Timothy Normand Miller Signed-off-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index 6928c24..5646727 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -388,4 +388,5 @@ extern int CIFSSMBSetPosixACL(const int xid, struct cifsTconInfo *tcon, const struct nls_table *nls_codepage, int remap_special_chars); extern int CIFSGetExtAttr(const int xid, struct cifsTconInfo *tcon, const int netfid, __u64 *pExtAttrBits, __u64 *pMask); +extern void cifs_autodisable_serverino(struct cifs_sb_info *cifs_sb); #endif /* _CIFSPROTO_H */ diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index 5e24925..cababd8 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -512,13 +512,10 @@ int cifs_get_inode_info(struct inode **pinode, cifs_sb->local_nls, cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); - if (rc1) { + if (rc1 || !fattr.cf_uniqueid) { cFYI(1, ("GetSrvInodeNum rc %d", rc1)); fattr.cf_uniqueid = iunique(sb, ROOT_I); - /* disable serverino if call not supported */ - if (rc1 == -EINVAL) - cifs_sb->mnt_cifs_flags &= - ~CIFS_MOUNT_SERVER_INUM; + cifs_autodisable_serverino(cifs_sb); } } else { fattr.cf_uniqueid = iunique(sb, ROOT_I); diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c index 0241b25..1e25efc 100644 --- a/fs/cifs/misc.c +++ b/fs/cifs/misc.c @@ -715,3 +715,17 @@ cifsConvertToUCS(__le16 *target, const char *source, int maxlen, ctoUCS_out: return i; } + +void +cifs_autodisable_serverino(struct cifs_sb_info *cifs_sb) +{ + if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) { + cifs_sb->mnt_cifs_flags &= CIFS_MOUNT_SERVER_INUM; + cERROR(1, ("Autodisabling the use of server inode numbers on " + "%s. This server doesn't seem to support them " + "properly. Hardlinks will not be recognized on this " + "mount. Consider mounting with the \"noserverino\" " + "option to silence this message.", + cifs_sb->tcon->treeName)); + } +} diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c index 1f098ca..f84062f 100644 --- a/fs/cifs/readdir.c +++ b/fs/cifs/readdir.c @@ -727,11 +727,12 @@ static int cifs_filldir(char *pfindEntry, struct file *file, filldir_t filldir, cifs_dir_info_to_fattr(&fattr, (FILE_DIRECTORY_INFO *) pfindEntry, cifs_sb); - /* FIXME: make _to_fattr functions fill this out */ - if (pCifsF->srch_inf.info_level == SMB_FIND_FILE_ID_FULL_DIR_INFO) + if (inum && (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM)) { fattr.cf_uniqueid = inum; - else + } else { fattr.cf_uniqueid = iunique(sb, ROOT_I); + cifs_autodisable_serverino(cifs_sb); + } ino = cifs_uniqueid_to_ino_t(fattr.cf_uniqueid); tmp_dentry = cifs_readdir_lookup(file->f_dentry, &qstring, &fattr); -- cgit v0.10.2 From f475f6775465283494346663f201ad04810d2e8a Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 6 Nov 2009 14:18:49 -0500 Subject: cifs: don't use CIFSGetSrvInodeNumber in is_path_accessible Because it's lighter weight, CIFS tries to use CIFSGetSrvInodeNumber to verify the accessibility of the root inode and then falls back to doing a full QPathInfo if that fails with -EOPNOTSUPP. I have at least a report of a server that returns NT_STATUS_INTERNAL_ERROR rather than something that translates to EOPNOTSUPP. Rather than trying to be clever with that call, just have is_path_accessible do a normal QPathInfo. That call is widely supported and it shouldn't increase the overhead significantly. Cc: Stable Signed-off-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index b090980..63ea83f 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -2220,16 +2220,8 @@ is_path_accessible(int xid, struct cifsTconInfo *tcon, struct cifs_sb_info *cifs_sb, const char *full_path) { int rc; - __u64 inode_num; FILE_ALL_INFO *pfile_info; - rc = CIFSGetSrvInodeNumber(xid, tcon, full_path, &inode_num, - cifs_sb->local_nls, - cifs_sb->mnt_cifs_flags & - CIFS_MOUNT_MAP_SPECIAL_CHR); - if (rc != -EOPNOTSUPP) - return rc; - pfile_info = kmalloc(sizeof(FILE_ALL_INFO), GFP_KERNEL); if (pfile_info == NULL) return -ENOMEM; -- cgit v0.10.2 From f1b291d4c47440cbfc1a478e88800e2742d60a80 Mon Sep 17 00:00:00 2001 From: Simon Kagstrom Date: Fri, 6 Nov 2009 15:44:04 +0100 Subject: x86: Add Phoenix/MSC BIOSes to lowmem corruption list We have a board with a Phoenix/MSC BIOS which also corrupts the low 64KB of RAM, so add an entry to the table. Signed-off-by: Simon Kagstrom LKML-Reference: <20091106154404.002648d9@marrow.netinsight.se> Signed-off-by: H. Peter Anvin diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index e09f0e2..2a34f9c 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -660,6 +660,13 @@ static struct dmi_system_id __initdata bad_bios_dmi_table[] = { }, }, { + .callback = dmi_low_memory_corruption, + .ident = "Phoenix/MSC BIOS", + .matches = { + DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix/MSC"), + }, + }, + { /* * AMI BIOS with low memory corruption was found on Intel DG45ID board. * It hase different DMI_BIOS_VENDOR = "Intel Corp.", for now we will -- cgit v0.10.2 From 539054a8fa5141c9a4e9ac6a86d249e3f2bdef45 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Fri, 6 Nov 2009 18:08:32 -0800 Subject: netfilter: xt_connlimit: fix regression caused by zero family value Commit v2.6.28-rc1~717^2~109^2~2 was slightly incomplete; not all instances of par->match->family were changed to par->family. References: http://bugzilla.netfilter.org/show_bug.cgi?id=610 Signed-off-by: Jan Engelhardt Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller diff --git a/net/netfilter/xt_connlimit.c b/net/netfilter/xt_connlimit.c index 6809809..38f03f7 100644 --- a/net/netfilter/xt_connlimit.c +++ b/net/netfilter/xt_connlimit.c @@ -103,7 +103,7 @@ static int count_them(struct xt_connlimit_data *data, const struct nf_conntrack_tuple *tuple, const union nf_inet_addr *addr, const union nf_inet_addr *mask, - const struct xt_match *match) + u_int8_t family) { const struct nf_conntrack_tuple_hash *found; struct xt_connlimit_conn *conn; @@ -113,8 +113,7 @@ static int count_them(struct xt_connlimit_data *data, bool addit = true; int matches = 0; - - if (match->family == NFPROTO_IPV6) + if (family == NFPROTO_IPV6) hash = &data->iphash[connlimit_iphash6(addr, mask)]; else hash = &data->iphash[connlimit_iphash(addr->ip & mask->ip)]; @@ -157,8 +156,7 @@ static int count_them(struct xt_connlimit_data *data, continue; } - if (same_source_net(addr, mask, &conn->tuple.src.u3, - match->family)) + if (same_source_net(addr, mask, &conn->tuple.src.u3, family)) /* same source network -> be counted! */ ++matches; nf_ct_put(found_ct); @@ -207,7 +205,7 @@ connlimit_mt(const struct sk_buff *skb, const struct xt_match_param *par) spin_lock_bh(&info->data->lock); connections = count_them(info->data, tuple_ptr, &addr, - &info->mask, par->match); + &info->mask, par->family); spin_unlock_bh(&info->data->lock); if (connections < 0) { -- cgit v0.10.2 From 9e90c961134929678022aee0c68b16c1ed520614 Mon Sep 17 00:00:00 2001 From: Ajit Khaparde Date: Fri, 6 Nov 2009 02:06:59 +0000 Subject: be2net: fix to set proper flow control on resume If be2 goes into suspend after a user changes the flow control settings, we are not programming them back after resume. This patch takes care of it. We now get the flow control settings before going to suspend mode and then apply them during resume. Signed-off-by: Ajit Khaparde Signed-off-by: David S. Miller diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h index a80da0e..3b79a22 100644 --- a/drivers/net/benet/be.h +++ b/drivers/net/benet/be.h @@ -259,6 +259,8 @@ struct be_adapter { u32 port_num; bool promiscuous; u32 cap; + u32 rx_fc; /* Rx flow control */ + u32 tx_fc; /* Tx flow control */ }; extern const struct ethtool_ops be_ethtool_ops; diff --git a/drivers/net/benet/be_ethtool.c b/drivers/net/benet/be_ethtool.c index cda5bf2..f0fd95b 100644 --- a/drivers/net/benet/be_ethtool.c +++ b/drivers/net/benet/be_ethtool.c @@ -323,10 +323,12 @@ be_set_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *ecmd) if (ecmd->autoneg != 0) return -EINVAL; + adapter->tx_fc = ecmd->tx_pause; + adapter->rx_fc = ecmd->rx_pause; - status = be_cmd_set_flow_control(adapter, ecmd->tx_pause, - ecmd->rx_pause); - if (!status) + status = be_cmd_set_flow_control(adapter, + adapter->tx_fc, adapter->rx_fc); + if (status) dev_warn(&adapter->pdev->dev, "Pause param set failed.\n"); return status; diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c index 1f941f0..4a7a452 100644 --- a/drivers/net/benet/be_main.c +++ b/drivers/net/benet/be_main.c @@ -1652,7 +1652,8 @@ static int be_setup(struct be_adapter *adapter) if (status != 0) goto mccqs_destroy; - status = be_cmd_set_flow_control(adapter, true, true); + status = be_cmd_set_flow_control(adapter, + adapter->tx_fc, adapter->rx_fc); if (status != 0) goto mccqs_destroy; return 0; @@ -1909,6 +1910,10 @@ static void be_netdev_init(struct net_device *netdev) adapter->rx_csum = true; + /* Default settings for Rx and Tx flow control */ + adapter->rx_fc = true; + adapter->tx_fc = true; + netif_set_gso_max_size(netdev, 65535); BE_SET_NETDEV_OPS(netdev, &be_netdev_ops); @@ -2171,6 +2176,7 @@ static int be_suspend(struct pci_dev *pdev, pm_message_t state) be_close(netdev); rtnl_unlock(); } + be_cmd_get_flow_control(adapter, &adapter->tx_fc, &adapter->rx_fc); be_clear(adapter); pci_save_state(pdev); -- cgit v0.10.2 From 4f2aa89cd263932d61f286307771996df76bf63e Mon Sep 17 00:00:00 2001 From: Ajit Khaparde Date: Fri, 6 Nov 2009 02:07:32 +0000 Subject: be2net: Bug fix to send config commands to hardware after netdev_register Sending config commands to be2 hardware before netdev_register is completed, is sometimes causing the async link notification to arrive even before the driver is ready to handle it. The commands for vlan config and flow control settings can infact wait till be_open. This patch takes care of that. Signed-off-by: Ajit Khaparde Signed-off-by: David S. Miller diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c index 4a7a452..876b357 100644 --- a/drivers/net/benet/be_main.c +++ b/drivers/net/benet/be_main.c @@ -1610,11 +1610,21 @@ static int be_open(struct net_device *netdev) status = be_cmd_link_status_query(adapter, &link_up); if (status) - return status; + goto ret_sts; be_link_status_update(adapter, link_up); + status = be_vid_config(adapter); + if (status) + goto ret_sts; + + status = be_cmd_set_flow_control(adapter, + adapter->tx_fc, adapter->rx_fc); + if (status) + goto ret_sts; + schedule_delayed_work(&adapter->work, msecs_to_jiffies(100)); - return 0; +ret_sts: + return status; } static int be_setup(struct be_adapter *adapter) @@ -1648,18 +1658,8 @@ static int be_setup(struct be_adapter *adapter) if (status != 0) goto rx_qs_destroy; - status = be_vid_config(adapter); - if (status != 0) - goto mccqs_destroy; - - status = be_cmd_set_flow_control(adapter, - adapter->tx_fc, adapter->rx_fc); - if (status != 0) - goto mccqs_destroy; return 0; -mccqs_destroy: - be_mcc_queues_destroy(adapter); rx_qs_destroy: be_rx_queues_destroy(adapter); tx_qs_destroy: -- cgit v0.10.2 From 2b2072e902848a63168570f500a5726744b3873a Mon Sep 17 00:00:00 2001 From: Sebastian Haas Date: Wed, 4 Nov 2009 05:48:33 +0000 Subject: ems_usb: Fix byte order issues on big endian machines CPC-USB is using a ARM7 core with little endian byte order. The "id" field in can_msg needs byte order conversion from/to CPU byte order. Signed-off-by: Sebastian Haas Signed-off-by: David S. Miller diff --git a/drivers/net/can/usb/ems_usb.c b/drivers/net/can/usb/ems_usb.c index 9012e0a..abdbd9c 100644 --- a/drivers/net/can/usb/ems_usb.c +++ b/drivers/net/can/usb/ems_usb.c @@ -319,7 +319,7 @@ static void ems_usb_rx_can_msg(struct ems_usb *dev, struct ems_cpc_msg *msg) cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame)); - cf->can_id = msg->msg.can_msg.id; + cf->can_id = le32_to_cpu(msg->msg.can_msg.id); cf->can_dlc = min_t(u8, msg->msg.can_msg.length, 8); if (msg->type == CPC_MSG_TYPE_EXT_CAN_FRAME @@ -813,6 +813,9 @@ static netdev_tx_t ems_usb_start_xmit(struct sk_buff *skb, struct net_device *ne msg->length = CPC_CAN_MSG_MIN_SIZE + cf->can_dlc; } + /* Respect byte order */ + msg->msg.can_msg.id = cpu_to_le32(msg->msg.can_msg.id); + for (i = 0; i < MAX_TX_URBS; i++) { if (dev->tx_contexts[i].echo_index == MAX_TX_URBS) { context = &dev->tx_contexts[i]; -- cgit v0.10.2 From 87d75b52414a22c54cf8382bcdd329376b1bce78 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 5 Nov 2009 23:14:29 +0000 Subject: NET: cassini, fix lock imbalance Stanse found that one error path in cas_open omits to unlock pm_mutex. Fix that. Signed-off-by: Jiri Slaby Signed-off-by: David S. Miller diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c index 05916aa..f857afe 100644 --- a/drivers/net/cassini.c +++ b/drivers/net/cassini.c @@ -4342,11 +4342,11 @@ static int cas_open(struct net_device *dev) cas_unlock_all_restore(cp, flags); } + err = -ENOMEM; if (cas_tx_tiny_alloc(cp) < 0) - return -ENOMEM; + goto err_unlock; /* alloc rx descriptors */ - err = -ENOMEM; if (cas_alloc_rxds(cp) < 0) goto err_tx_tiny; @@ -4386,6 +4386,7 @@ err_spare: cas_free_rxds(cp); err_tx_tiny: cas_tx_tiny_free(cp); +err_unlock: mutex_unlock(&cp->pm_mutex); return err; } -- cgit v0.10.2 From dcaa6a9414cdc767c0afba4705c25ae9cf6096b5 Mon Sep 17 00:00:00 2001 From: Finn Thain Date: Tue, 3 Nov 2009 03:42:40 +0000 Subject: macsonic: fix crash on PowerBook 520 No-one seems to know where the PowerBook 500 series store their ethernet MAC addresses. So, rather than crash, use a MAC address from the SONIC CAM. Failing that, generate a random one. Signed-off-by: Finn Thain Signed-off-by: David S. Miller diff --git a/drivers/net/macsonic.c b/drivers/net/macsonic.c index 61eabca..b3d7d8d 100644 --- a/drivers/net/macsonic.c +++ b/drivers/net/macsonic.c @@ -223,69 +223,73 @@ static int __devinit macsonic_init(struct net_device *dev) return 0; } -static int __devinit mac_onboard_sonic_ethernet_addr(struct net_device *dev) +#define INVALID_MAC(mac) (memcmp(mac, "\x08\x00\x07", 3) && \ + memcmp(mac, "\x00\xA0\x40", 3) && \ + memcmp(mac, "\x00\x80\x19", 3) && \ + memcmp(mac, "\x00\x05\x02", 3)) + +static void __devinit mac_onboard_sonic_ethernet_addr(struct net_device *dev) { struct sonic_local *lp = netdev_priv(dev); const int prom_addr = ONBOARD_SONIC_PROM_BASE; - int i; + unsigned short val; - /* On NuBus boards we can sometimes look in the ROM resources. - No such luck for comm-slot/onboard. */ - for(i = 0; i < 6; i++) - dev->dev_addr[i] = SONIC_READ_PROM(i); + /* + * On NuBus boards we can sometimes look in the ROM resources. + * No such luck for comm-slot/onboard. + * On the PowerBook 520, the PROM base address is a mystery. + */ + if (hwreg_present((void *)prom_addr)) { + int i; + + for (i = 0; i < 6; i++) + dev->dev_addr[i] = SONIC_READ_PROM(i); + if (!INVALID_MAC(dev->dev_addr)) + return; - /* Most of the time, the address is bit-reversed. The NetBSD - source has a rather long and detailed historical account of - why this is so. */ - if (memcmp(dev->dev_addr, "\x08\x00\x07", 3) && - memcmp(dev->dev_addr, "\x00\xA0\x40", 3) && - memcmp(dev->dev_addr, "\x00\x80\x19", 3) && - memcmp(dev->dev_addr, "\x00\x05\x02", 3)) + /* + * Most of the time, the address is bit-reversed. The NetBSD + * source has a rather long and detailed historical account of + * why this is so. + */ bit_reverse_addr(dev->dev_addr); - else - return 0; - - /* If we still have what seems to be a bogus address, we'll - look in the CAM. The top entry should be ours. */ - /* Danger! This only works if MacOS has already initialized - the card... */ - if (memcmp(dev->dev_addr, "\x08\x00\x07", 3) && - memcmp(dev->dev_addr, "\x00\xA0\x40", 3) && - memcmp(dev->dev_addr, "\x00\x80\x19", 3) && - memcmp(dev->dev_addr, "\x00\x05\x02", 3)) - { - unsigned short val; - - printk(KERN_INFO "macsonic: PROM seems to be wrong, trying CAM entry 15\n"); - - SONIC_WRITE(SONIC_CMD, SONIC_CR_RST); - SONIC_WRITE(SONIC_CEP, 15); - - val = SONIC_READ(SONIC_CAP2); - dev->dev_addr[5] = val >> 8; - dev->dev_addr[4] = val & 0xff; - val = SONIC_READ(SONIC_CAP1); - dev->dev_addr[3] = val >> 8; - dev->dev_addr[2] = val & 0xff; - val = SONIC_READ(SONIC_CAP0); - dev->dev_addr[1] = val >> 8; - dev->dev_addr[0] = val & 0xff; - - printk(KERN_INFO "HW Address from CAM 15: %pM\n", - dev->dev_addr); - } else return 0; - - if (memcmp(dev->dev_addr, "\x08\x00\x07", 3) && - memcmp(dev->dev_addr, "\x00\xA0\x40", 3) && - memcmp(dev->dev_addr, "\x00\x80\x19", 3) && - memcmp(dev->dev_addr, "\x00\x05\x02", 3)) - { + if (!INVALID_MAC(dev->dev_addr)) + return; + /* - * Still nonsense ... messed up someplace! + * If we still have what seems to be a bogus address, we'll + * look in the CAM. The top entry should be ours. */ - printk(KERN_ERR "macsonic: ERROR (INVALID MAC)\n"); - return -EIO; - } else return 0; + printk(KERN_WARNING "macsonic: MAC address in PROM seems " + "to be invalid, trying CAM\n"); + } else { + printk(KERN_WARNING "macsonic: cannot read MAC address from " + "PROM, trying CAM\n"); + } + + /* This only works if MacOS has already initialized the card. */ + + SONIC_WRITE(SONIC_CMD, SONIC_CR_RST); + SONIC_WRITE(SONIC_CEP, 15); + + val = SONIC_READ(SONIC_CAP2); + dev->dev_addr[5] = val >> 8; + dev->dev_addr[4] = val & 0xff; + val = SONIC_READ(SONIC_CAP1); + dev->dev_addr[3] = val >> 8; + dev->dev_addr[2] = val & 0xff; + val = SONIC_READ(SONIC_CAP0); + dev->dev_addr[1] = val >> 8; + dev->dev_addr[0] = val & 0xff; + + if (!INVALID_MAC(dev->dev_addr)) + return; + + /* Still nonsense ... messed up someplace! */ + + printk(KERN_WARNING "macsonic: MAC address in CAM entry 15 " + "seems invalid, will use a random MAC\n"); + random_ether_addr(dev->dev_addr); } static int __devinit mac_onboard_sonic_probe(struct net_device *dev) @@ -402,8 +406,7 @@ static int __devinit mac_onboard_sonic_probe(struct net_device *dev) SONIC_WRITE(SONIC_ISR, 0x7fff); /* Now look for the MAC address. */ - if (mac_onboard_sonic_ethernet_addr(dev) != 0) - return -ENODEV; + mac_onboard_sonic_ethernet_addr(dev); /* Shared init code */ return macsonic_init(dev); -- cgit v0.10.2 From b352e40da8977253f49850a24f6448653a459ac0 Mon Sep 17 00:00:00 2001 From: Yi Zou Date: Fri, 6 Nov 2009 12:55:38 +0000 Subject: ixgbe: Fix gso_max_size for 82599 when DCB is enabled The 32k gso_max_size when DCB is enabled is for 82598 only, not for 82599. Signed-off-by: Yi Zou Acked-by: Peter P Waskiewicz Jr Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index cbb143c..26fc1df 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -2471,7 +2471,10 @@ static void ixgbe_configure(struct ixgbe_adapter *adapter) ixgbe_restore_vlan(adapter); #ifdef CONFIG_IXGBE_DCB if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) { - netif_set_gso_max_size(netdev, 32768); + if (hw->mac.type == ixgbe_mac_82598EB) + netif_set_gso_max_size(netdev, 32768); + else + netif_set_gso_max_size(netdev, 65536); ixgbe_configure_dcb(adapter); } else { netif_set_gso_max_size(netdev, 65536); -- cgit v0.10.2 From 26f23d82dd8eae6dcc2ab99c04a9256089576a73 Mon Sep 17 00:00:00 2001 From: Yi Zou Date: Fri, 6 Nov 2009 12:56:00 +0000 Subject: ixgbe: Fix checking TFCS register for TXOFF status when DCB is enabled When DCB is enabled, the ixgbe_check_tx_hang() should check the corresponding TC's TXOFF in TFCS based on the TC that the tx ring belongs to. Adds a function to map from the tx_ring hw reg_idx to the correspodning TC and read TFCS accordingly. Signed-off-by: Yi Zou Acked-by: Peter P Waskiewicz Jr Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 26fc1df..2d0f618 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -226,6 +226,56 @@ static void ixgbe_unmap_and_free_tx_resource(struct ixgbe_adapter *adapter, /* tx_buffer_info must be completely set up in the transmit path */ } +/** + * ixgbe_tx_is_paused - check if the tx ring is paused + * @adapter: the ixgbe adapter + * @tx_ring: the corresponding tx_ring + * + * If not in DCB mode, checks TFCS.TXOFF, otherwise, find out the + * corresponding TC of this tx_ring when checking TFCS. + * + * Returns : true if paused + */ +static inline bool ixgbe_tx_is_paused(struct ixgbe_adapter *adapter, + struct ixgbe_ring *tx_ring) +{ + int tc; + u32 txoff = IXGBE_TFCS_TXOFF; + +#ifdef CONFIG_IXGBE_DCB + if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) { + int reg_idx = tx_ring->reg_idx; + int dcb_i = adapter->ring_feature[RING_F_DCB].indices; + + if (adapter->hw.mac.type == ixgbe_mac_82598EB) { + tc = reg_idx >> 2; + txoff = IXGBE_TFCS_TXOFF0; + } else if (adapter->hw.mac.type == ixgbe_mac_82599EB) { + tc = 0; + txoff = IXGBE_TFCS_TXOFF; + if (dcb_i == 8) { + /* TC0, TC1 */ + tc = reg_idx >> 5; + if (tc == 2) /* TC2, TC3 */ + tc += (reg_idx - 64) >> 4; + else if (tc == 3) /* TC4, TC5, TC6, TC7 */ + tc += 1 + ((reg_idx - 96) >> 3); + } else if (dcb_i == 4) { + /* TC0, TC1 */ + tc = reg_idx >> 6; + if (tc == 1) { + tc += (reg_idx - 64) >> 5; + if (tc == 2) /* TC2, TC3 */ + tc += (reg_idx - 96) >> 4; + } + } + } + txoff <<= tc; + } +#endif + return IXGBE_READ_REG(&adapter->hw, IXGBE_TFCS) & txoff; +} + static inline bool ixgbe_check_tx_hang(struct ixgbe_adapter *adapter, struct ixgbe_ring *tx_ring, unsigned int eop) @@ -237,7 +287,7 @@ static inline bool ixgbe_check_tx_hang(struct ixgbe_adapter *adapter, adapter->detect_tx_hung = false; if (tx_ring->tx_buffer_info[eop].time_stamp && time_after(jiffies, tx_ring->tx_buffer_info[eop].time_stamp + HZ) && - !(IXGBE_READ_REG(&adapter->hw, IXGBE_TFCS) & IXGBE_TFCS_TXOFF)) { + !ixgbe_tx_is_paused(adapter, tx_ring)) { /* detected Tx unit hang */ union ixgbe_adv_tx_desc *tx_desc; tx_desc = IXGBE_TX_DESC_ADV(*tx_ring, eop); -- cgit v0.10.2 From ee5f784a2d48cdacf561e99b2d01b23364189474 Mon Sep 17 00:00:00 2001 From: Don Skidmore Date: Fri, 6 Nov 2009 12:56:20 +0000 Subject: ixgbe: fix traffic hangs on Tx with ioatdma loaded When ioatdma was loaded we we were unable to transmit traffic. We weren't using the correct registers in ixgbe_update_tx_dca for 82599 systems. Likewise in ixgbe_configure_tx() we weren't disabling the arbiter before modifying MTQC. Signed-off-by: Don Skidmore Acked-by: Peter P Waskiewicz Jr Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 2d0f618..5bd9e6b 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -44,6 +44,7 @@ #include "ixgbe.h" #include "ixgbe_common.h" +#include "ixgbe_dcb_82599.h" char ixgbe_driver_name[] = "ixgbe"; static const char ixgbe_driver_string[] = @@ -462,19 +463,23 @@ static void ixgbe_update_tx_dca(struct ixgbe_adapter *adapter, u32 txctrl; int cpu = get_cpu(); int q = tx_ring - adapter->tx_ring; + struct ixgbe_hw *hw = &adapter->hw; if (tx_ring->cpu != cpu) { - txctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_DCA_TXCTRL(q)); if (adapter->hw.mac.type == ixgbe_mac_82598EB) { + txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(q)); txctrl &= ~IXGBE_DCA_TXCTRL_CPUID_MASK; txctrl |= dca3_get_tag(&adapter->pdev->dev, cpu); + txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN; + IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(q), txctrl); } else if (adapter->hw.mac.type == ixgbe_mac_82599EB) { + txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(q)); txctrl &= ~IXGBE_DCA_TXCTRL_CPUID_MASK_82599; txctrl |= (dca3_get_tag(&adapter->pdev->dev, cpu) << - IXGBE_DCA_TXCTRL_CPUID_SHIFT_82599); + IXGBE_DCA_TXCTRL_CPUID_SHIFT_82599); + txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN; + IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(q), txctrl); } - txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN; - IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_TXCTRL(q), txctrl); tx_ring->cpu = cpu; } put_cpu(); @@ -1963,11 +1968,25 @@ static void ixgbe_configure_tx(struct ixgbe_adapter *adapter) break; } } + if (hw->mac.type == ixgbe_mac_82599EB) { + u32 rttdcs; + + /* disable the arbiter while setting MTQC */ + rttdcs = IXGBE_READ_REG(hw, IXGBE_RTTDCS); + rttdcs |= IXGBE_RTTDCS_ARBDIS; + IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, rttdcs); + /* We enable 8 traffic classes, DCB only */ if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) IXGBE_WRITE_REG(hw, IXGBE_MTQC, (IXGBE_MTQC_RT_ENA | IXGBE_MTQC_8TC_8TQ)); + else + IXGBE_WRITE_REG(hw, IXGBE_MTQC, IXGBE_MTQC_64Q_1PB); + + /* re-eable the arbiter */ + rttdcs &= ~IXGBE_RTTDCS_ARBDIS; + IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, rttdcs); } } -- cgit v0.10.2 From 60fa6c374e7efcbed04bc6d11d3b35645c523b2f Mon Sep 17 00:00:00 2001 From: Ron Mercer Date: Fri, 6 Nov 2009 07:44:57 +0000 Subject: qlge: Fix early exit from mbox cmd complete wait. This line was accidentally left out of the previous commit # da03945140a035a2962f7f93e359085596f20499 ("qlge: Fix firmware mailbox command timeout."). Signed-off-by: Ron Mercer Signed-off-by: David S. Miller diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c index bcf13c9..aec05f2 100644 --- a/drivers/net/qlge/qlge_mpi.c +++ b/drivers/net/qlge/qlge_mpi.c @@ -499,7 +499,7 @@ static int ql_mailbox_command(struct ql_adapter *qdev, struct mbox_params *mbcp) /* Wait for the interrupt to come in. */ status = ql_wait_mbx_cmd_cmplt(qdev); if (status) - goto end; + continue; /* Process the event. If it's an AEN, it * will be handled in-line or a worker -- cgit v0.10.2 From 73475339005dc68eb0bd2f6b1e93a3a39b628410 Mon Sep 17 00:00:00 2001 From: Ron Mercer Date: Fri, 6 Nov 2009 07:44:58 +0000 Subject: qlge: Set PCIe reset type for EEH to fundamental. This device requires a fundamental reset when recovering from EEH. Signed-off-by: Ron Mercer Signed-off-by: David S. Miller diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c index cea7531..a2fc70a 100644 --- a/drivers/net/qlge/qlge_main.c +++ b/drivers/net/qlge/qlge_main.c @@ -3916,6 +3916,8 @@ static int __devinit ql_init_device(struct pci_dev *pdev, goto err_out; } + /* Set PCIe reset type for EEH to fundamental. */ + pdev->needs_freset = 1; pci_save_state(pdev); qdev->reg_base = ioremap_nocache(pci_resource_start(pdev, 1), -- cgit v0.10.2 From 23ca0c989e46924393f1d54bec84801d035dd28e Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Fri, 6 Nov 2009 10:37:41 +0000 Subject: ipip: Fix handling of DF packets when pmtudisc is OFF RFC 2003 requires the outer header to have DF set if DF is set on the inner header, even when PMTU discovery is off for the tunnel. Our implementation does exactly that. For this to work properly the IPIP gateway also needs to engate in PMTU when the inner DF bit is set. As otherwise the original host would not be able to carry out its PMTU successfully since part of the path is only visible to the gateway. Unfortunately when the tunnel PMTU discovery setting is off, we do not collect the necessary soft state, resulting in blackholes when the original host tries to perform PMTU discovery. This problem is not reproducible on the IPIP gateway itself as the inner packet usually has skb->local_df set. This is not correctly cleared (an unrelated bug) when the packet passes through the tunnel, which allows fragmentation to occur. For hosts behind the IPIP gateway it is readily visible with a simple ping. This patch fixes the problem by performing PMTU discovery for all packets with the inner DF bit set, regardless of the PMTU discovery setting on the tunnel itself. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller diff --git a/net/ipv4/ipip.c b/net/ipv4/ipip.c index 08ccd34..ae40ed1 100644 --- a/net/ipv4/ipip.c +++ b/net/ipv4/ipip.c @@ -438,25 +438,27 @@ static netdev_tx_t ipip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev) goto tx_error; } - if (tiph->frag_off) + df |= old_iph->frag_off & htons(IP_DF); + + if (df) { mtu = dst_mtu(&rt->u.dst) - sizeof(struct iphdr); - else - mtu = skb_dst(skb) ? dst_mtu(skb_dst(skb)) : dev->mtu; - if (mtu < 68) { - stats->collisions++; - ip_rt_put(rt); - goto tx_error; - } - if (skb_dst(skb)) - skb_dst(skb)->ops->update_pmtu(skb_dst(skb), mtu); + if (mtu < 68) { + stats->collisions++; + ip_rt_put(rt); + goto tx_error; + } - df |= (old_iph->frag_off&htons(IP_DF)); + if (skb_dst(skb)) + skb_dst(skb)->ops->update_pmtu(skb_dst(skb), mtu); - if ((old_iph->frag_off&htons(IP_DF)) && mtu < ntohs(old_iph->tot_len)) { - icmp_send(skb, ICMP_DEST_UNREACH, ICMP_FRAG_NEEDED, htonl(mtu)); - ip_rt_put(rt); - goto tx_error; + if ((old_iph->frag_off & htons(IP_DF)) && + mtu < ntohs(old_iph->tot_len)) { + icmp_send(skb, ICMP_DEST_UNREACH, ICMP_FRAG_NEEDED, + htonl(mtu)); + ip_rt_put(rt); + goto tx_error; + } } if (tunnel->err_count > 0) { -- cgit v0.10.2 From cc05368c52fed7d9efa0f56c5270e95bb569713e Mon Sep 17 00:00:00 2001 From: Martin Michlmayr Date: Fri, 6 Nov 2009 14:52:34 +0000 Subject: hisax: remove bad udelay call to fix build error on ARM The hisax ISDN driver fails to build on ARM with CONFIG_HISAX_ELSA: | drivers/built-in.o: In function `modem_set_dial': | drivers/isdn/hisax/elsa_ser.c:535: undefined reference to `__bad_udelay' | drivers/isdn/hisax/elsa_ser.c:544: undefined reference to `__bad_udelay' | drivers/built-in.o: In function `modem_set_init': | drivers/isdn/hisax/elsa_ser.c:486: undefined reference to `__bad_udelay' | [...] According to the comment in arch/arm/include/asm/delay.h, __bad_udelay is specifically designed on ARM to produce a build failure when udelay is called with a value > 2000. Signed-off-by: Martin Michlmayr Signed-off-by: David S. Miller diff --git a/drivers/isdn/hisax/elsa_ser.c b/drivers/isdn/hisax/elsa_ser.c index f181db4..1657bba 100644 --- a/drivers/isdn/hisax/elsa_ser.c +++ b/drivers/isdn/hisax/elsa_ser.c @@ -477,62 +477,62 @@ static void modem_set_init(struct IsdnCardState *cs) { int timeout; -#define RCV_DELAY 20000 +#define RCV_DELAY 20 modem_write_cmd(cs, MInit_1, strlen(MInit_1)); timeout = 1000; while(timeout-- && cs->hw.elsa.transcnt) udelay(1000); debugl1(cs, "msi tout=%d", timeout); - udelay(RCV_DELAY); + mdelay(RCV_DELAY); modem_write_cmd(cs, MInit_2, strlen(MInit_2)); timeout = 1000; while(timeout-- && cs->hw.elsa.transcnt) udelay(1000); debugl1(cs, "msi tout=%d", timeout); - udelay(RCV_DELAY); + mdelay(RCV_DELAY); modem_write_cmd(cs, MInit_3, strlen(MInit_3)); timeout = 1000; while(timeout-- && cs->hw.elsa.transcnt) udelay(1000); debugl1(cs, "msi tout=%d", timeout); - udelay(RCV_DELAY); + mdelay(RCV_DELAY); modem_write_cmd(cs, MInit_4, strlen(MInit_4)); timeout = 1000; while(timeout-- && cs->hw.elsa.transcnt) udelay(1000); debugl1(cs, "msi tout=%d", timeout); - udelay(RCV_DELAY ); + mdelay(RCV_DELAY); modem_write_cmd(cs, MInit_5, strlen(MInit_5)); timeout = 1000; while(timeout-- && cs->hw.elsa.transcnt) udelay(1000); debugl1(cs, "msi tout=%d", timeout); - udelay(RCV_DELAY); + mdelay(RCV_DELAY); modem_write_cmd(cs, MInit_6, strlen(MInit_6)); timeout = 1000; while(timeout-- && cs->hw.elsa.transcnt) udelay(1000); debugl1(cs, "msi tout=%d", timeout); - udelay(RCV_DELAY); + mdelay(RCV_DELAY); modem_write_cmd(cs, MInit_7, strlen(MInit_7)); timeout = 1000; while(timeout-- && cs->hw.elsa.transcnt) udelay(1000); debugl1(cs, "msi tout=%d", timeout); - udelay(RCV_DELAY); + mdelay(RCV_DELAY); } static void modem_set_dial(struct IsdnCardState *cs, int outgoing) { int timeout; -#define RCV_DELAY 20000 +#define RCV_DELAY 20 modem_write_cmd(cs, MInit_speed28800, strlen(MInit_speed28800)); timeout = 1000; while(timeout-- && cs->hw.elsa.transcnt) udelay(1000); debugl1(cs, "msi tout=%d", timeout); - udelay(RCV_DELAY); + mdelay(RCV_DELAY); if (outgoing) modem_write_cmd(cs, MInit_dialout, strlen(MInit_dialout)); else @@ -541,7 +541,7 @@ modem_set_dial(struct IsdnCardState *cs, int outgoing) { while(timeout-- && cs->hw.elsa.transcnt) udelay(1000); debugl1(cs, "msi tout=%d", timeout); - udelay(RCV_DELAY); + mdelay(RCV_DELAY); } static void -- cgit v0.10.2 From 70edc800a39327174d3244f9226ce8cacd01dc91 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 6 Nov 2009 22:41:29 +0000 Subject: sound: Replace old style lock initializer SPIN_LOCK_UNLOCKED is deprecated. Use __SPIN_LOCK_UNLOCKED instead. Signed-off-by: Thomas Gleixner Signed-off-by: Takashi Iwai diff --git a/sound/oss/dmasound/dmasound_core.c b/sound/oss/dmasound/dmasound_core.c index 793b7f4..3f3c3f7 100644 --- a/sound/oss/dmasound/dmasound_core.c +++ b/sound/oss/dmasound/dmasound_core.c @@ -219,7 +219,9 @@ static int shared_resources_initialised; * Mid level stuff */ -struct sound_settings dmasound = { .lock = SPIN_LOCK_UNLOCKED }; +struct sound_settings dmasound = { + .lock = __SPIN_LOCK_UNLOCKED(dmasound.lock) +}; static inline void sound_silence(void) { -- cgit v0.10.2 From f495088210c8b9e20791d995a8210170c68d2deb Mon Sep 17 00:00:00 2001 From: Julian Anastasov Date: Fri, 6 Nov 2009 23:44:53 +0200 Subject: ALSA: usb-audio: fix combine_word problem Fix combine_word problem where first octet is not read properly. The only affected place seems to be the INPUT_TERMINAL type. Before now, sound controls can be created with the output terminal's name which is a fallback mechanism used only for unknown input terminal types. For example, Line can wrongly appear as Speaker. After the change it should appear as Line. The side effect of this change can be that users can expect the wrong control name in their scripts or programs while now we return the correct one. Probably, these defines should use get_unaligned_le16 and friends. Signed-off-by: Julian Anastasov Cc: Signed-off-by: Takashi Iwai diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h index 8e7f789..e9a3a9d 100644 --- a/sound/usb/usbaudio.h +++ b/sound/usb/usbaudio.h @@ -210,7 +210,7 @@ struct snd_usb_midi_endpoint_info { /* */ -#define combine_word(s) ((*s) | ((unsigned int)(s)[1] << 8)) +#define combine_word(s) ((*(s)) | ((unsigned int)(s)[1] << 8)) #define combine_triple(s) (combine_word(s) | ((unsigned int)(s)[2] << 16)) #define combine_quad(s) (combine_triple(s) | ((unsigned int)(s)[3] << 24)) -- cgit v0.10.2 From 1a6969788ef2d5bc3169eee59def6b267182f136 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sat, 7 Nov 2009 09:49:04 +0100 Subject: ALSA: hda - Don't initialize CORB/RIRB for single_cmd mode So far, CORB/RIRB still remains even if the driver is switched to the single_cmd mode. The specification says that this should be disabled, but I hoped this isn't the case; indeed most devices worked together with CORB/RIRB. However, Poulsbo (US15W) seems problematic with this setup, and it requires to disable CORB/RIRB when single_cmd is used. Now this patch disables CORB/RIRB initialization when the single_cmd mode is used. Also the unsolicited event is disabled because it can't work without RIRB. Reported-and-tested-by: Troy Kisky Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index e340792..6517f58 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -722,9 +722,10 @@ static unsigned int azx_rirb_get_response(struct hda_bus *bus, chip->last_cmd[addr]); chip->single_cmd = 1; bus->response_reset = 0; - /* re-initialize CORB/RIRB */ + /* release CORB/RIRB */ azx_free_cmd_io(chip); - azx_init_cmd_io(chip); + /* disable unsolicited responses */ + azx_writel(chip, GCTL, azx_readl(chip, GCTL) & ~ICH6_GCTL_UNSOL); return -1; } @@ -865,7 +866,9 @@ static int azx_reset(struct azx *chip) } /* Accept unsolicited responses */ - azx_writel(chip, GCTL, azx_readl(chip, GCTL) | ICH6_GCTL_UNSOL); + if (!chip->single_cmd) + azx_writel(chip, GCTL, azx_readl(chip, GCTL) | + ICH6_GCTL_UNSOL); /* detect codecs */ if (!chip->codec_mask) { @@ -980,7 +983,8 @@ static void azx_init_chip(struct azx *chip) azx_int_enable(chip); /* initialize the codec command I/O */ - azx_init_cmd_io(chip); + if (!chip->single_cmd) + azx_init_cmd_io(chip); /* program the position buffer */ azx_writel(chip, DPLBASE, (u32)chip->posbuf.addr); -- cgit v0.10.2 From 3806e94b0148350c72f9a3214274026b6ca03f49 Mon Sep 17 00:00:00 2001 From: Crane Cai Date: Sat, 7 Nov 2009 13:10:46 +0100 Subject: i2c-piix4: Modify code name SB900 to Hudson-2 Change SB900 to its formal code name Hudson-2. Signed-off-by: Crane Cai Signed-off-by: Jean Delvare diff --git a/Documentation/i2c/busses/i2c-piix4 b/Documentation/i2c/busses/i2c-piix4 index c5b37c5..ac540c7 100644 --- a/Documentation/i2c/busses/i2c-piix4 +++ b/Documentation/i2c/busses/i2c-piix4 @@ -8,7 +8,7 @@ Supported adapters: Datasheet: Only available via NDA from ServerWorks * ATI IXP200, IXP300, IXP400, SB600, SB700 and SB800 southbridges Datasheet: Not publicly available - * AMD SB900 + * AMD Hudson-2 Datasheet: Not publicly available * Standard Microsystems (SMSC) SLC90E66 (Victory66) southbridge Datasheet: Publicly available at the SMSC website http://www.smsc.com diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 737335f..e8fe7f1 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -128,7 +128,7 @@ config I2C_PIIX4 ATI SB600 ATI SB700 ATI SB800 - AMD SB900 + AMD Hudson-2 Serverworks OSB4 Serverworks CSB5 Serverworks CSB6 diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index d26a972..1e245e9 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -22,7 +22,7 @@ Intel PIIX4, 440MX Serverworks OSB4, CSB5, CSB6, HT-1000, HT-1100 ATI IXP200, IXP300, IXP400, SB600, SB700, SB800 - AMD SB900 + AMD Hudson-2 SMSC Victory66 Note: we assume there can only be one device, with one SMBus interface. @@ -233,9 +233,9 @@ static int __devinit piix4_setup_sb800(struct pci_dev *PIIX4_dev, unsigned short smba_idx = 0xcd6; u8 smba_en_lo, smba_en_hi, i2ccfg, i2ccfg_offset = 0x10, smb_en = 0x2c; - /* SB800 SMBus does not support forcing address */ + /* SB800 and later SMBus does not support forcing address */ if (force || force_addr) { - dev_err(&PIIX4_dev->dev, "SB800 SMBus does not support " + dev_err(&PIIX4_dev->dev, "SMBus does not support " "forcing address!\n"); return -EINVAL; } @@ -480,7 +480,7 @@ static struct pci_device_id piix4_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS) }, - { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_SB900_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4) }, { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index b0f0f38..9ceb392 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -543,7 +543,7 @@ #define PCI_DEVICE_ID_AMD_8131_BRIDGE 0x7450 #define PCI_DEVICE_ID_AMD_8131_APIC 0x7451 #define PCI_DEVICE_ID_AMD_8132_BRIDGE 0x7458 -#define PCI_DEVICE_ID_AMD_SB900_SMBUS 0x780b +#define PCI_DEVICE_ID_AMD_HUDSON2_SMBUS 0x780b #define PCI_DEVICE_ID_AMD_CS5535_IDE 0x208F #define PCI_DEVICE_ID_AMD_CS5536_ISA 0x2090 #define PCI_DEVICE_ID_AMD_CS5536_FLASH 0x2091 -- cgit v0.10.2 From afa08974fe80c198b8650f73ed8ab59135ca10d0 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 7 Nov 2009 13:10:46 +0100 Subject: i2c: Add an interface to lock/unlock an I2C bus segment Some drivers need to be able to prevent access to an I2C bus segment for a specific period of time. Add an interface for them to do so without twiddling with i2c-core internals. Signed-off-by: Jean Delvare Acked-by: Ben Hutchings diff --git a/drivers/net/sfc/sfe4001.c b/drivers/net/sfc/sfe4001.c index cee00ad..49eb91b 100644 --- a/drivers/net/sfc/sfe4001.c +++ b/drivers/net/sfc/sfe4001.c @@ -188,7 +188,7 @@ static int sfn4111t_reset(struct efx_nic *efx) efx_oword_t reg; /* GPIO 3 and the GPIO register are shared with I2C, so block that */ - mutex_lock(&efx->i2c_adap.bus_lock); + i2c_lock_adapter(&efx->i2c_adap); /* Pull RST_N (GPIO 2) low then let it up again, setting the * FLASH_CFG_1 strap (GPIO 3) appropriately. Only change the @@ -204,7 +204,7 @@ static int sfn4111t_reset(struct efx_nic *efx) falcon_write(efx, ®, GPIO_CTL_REG_KER); msleep(1); - mutex_unlock(&efx->i2c_adap.bus_lock); + i2c_unlock_adapter(&efx->i2c_adap); ssleep(1); return 0; diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 57d41b0..7b40cda 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -361,6 +361,24 @@ static inline void i2c_set_adapdata(struct i2c_adapter *dev, void *data) dev_set_drvdata(&dev->dev, data); } +/** + * i2c_lock_adapter - Prevent access to an I2C bus segment + * @adapter: Target I2C bus segment + */ +static inline void i2c_lock_adapter(struct i2c_adapter *adapter) +{ + mutex_lock(&adapter->bus_lock); +} + +/** + * i2c_unlock_adapter - Reauthorize access to an I2C bus segment + * @adapter: Target I2C bus segment + */ +static inline void i2c_unlock_adapter(struct i2c_adapter *adapter) +{ + mutex_unlock(&adapter->bus_lock); +} + /*flags for the client struct: */ #define I2C_CLIENT_PEC 0x04 /* Use Packet Error Checking */ #define I2C_CLIENT_TEN 0x10 /* we have a ten bit chip address */ -- cgit v0.10.2 From 2b5d9946bc6bfdfa489f099eb59bcc15f8ae5afa Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 27 Sep 2009 19:11:34 -0300 Subject: V4L/DVB (13048): dib0070: fix build dependency when driver is disabled Fix build dependency on function, dib0070_ctrl_agc_filter [mchehab@redhat.com: reverted the quick workaround 3f48258e50ef4] Signed-off-by: Michael Krufky Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index 9744b06..0e4b97f 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -75,7 +75,7 @@ config DVB_USB_DIB0700 select DVB_DIB3000MC if !DVB_FE_CUSTOMISE select DVB_S5H1411 if !DVB_FE_CUSTOMISE select DVB_LGDT3305 if !DVB_FE_CUSTOMISE - select DVB_TUNER_DIB0070 + select DVB_TUNER_DIB0070 if !DVB_FE_CUSTOMISE select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_MT2266 if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE diff --git a/drivers/media/dvb/frontends/dib0070.h b/drivers/media/dvb/frontends/dib0070.h index 8a2e1e7..eec9e52 100644 --- a/drivers/media/dvb/frontends/dib0070.h +++ b/drivers/media/dvb/frontends/dib0070.h @@ -51,6 +51,7 @@ struct dib0070_config { #if defined(CONFIG_DVB_TUNER_DIB0070) || (defined(CONFIG_DVB_TUNER_DIB0070_MODULE) && defined(MODULE)) extern struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg); extern u16 dib0070_wbd_offset(struct dvb_frontend *); +extern void dib0070_ctrl_agc_filter(struct dvb_frontend *, u8 open); #else static inline struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg) { @@ -63,7 +64,11 @@ static inline u16 dib0070_wbd_offset(struct dvb_frontend *fe) printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return -ENODEV; } + +static inline void dib0070_ctrl_agc_filter(struct dvb_frontend *fe, u8 open) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); +} #endif -extern void dib0070_ctrl_agc_filter(struct dvb_frontend *, u8 open); #endif -- cgit v0.10.2 From 1e13c8f0c97c883287b1940719d0040fd38fcd58 Mon Sep 17 00:00:00 2001 From: Patrick Boettcher Date: Sat, 19 Sep 2009 05:24:40 -0300 Subject: V4L/DVB (13050): DIB0700: fix-up USB device ID for Terratec/Leadtek git commit db48138f6bc4d2b613b08731ffc8b319432ebc25 changed by accident the assignment of certain USB IDs to their device-specific-handlers. Thanks to Edward Sheldrake for finding this regression Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index 0b2812a..6bd8951 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -1925,7 +1925,7 @@ struct dvb_usb_device_properties dib0700_devices[] = { { NULL }, }, { "Leadtek Winfast DTV Dongle (STK7700P based)", - { &dib0700_usb_id_table[8] }, + { &dib0700_usb_id_table[8], &dib0700_usb_id_table[34] }, { NULL }, }, { "AVerMedia AVerTV DVB-T Express", @@ -2064,7 +2064,7 @@ struct dvb_usb_device_properties dib0700_devices[] = { }, }, - .num_device_descs = 12, + .num_device_descs = 11, .devices = { { "DiBcom STK7070P reference design", { &dib0700_usb_id_table[15], NULL }, @@ -2098,11 +2098,6 @@ struct dvb_usb_device_properties dib0700_devices[] = { { &dib0700_usb_id_table[30], NULL }, { NULL }, }, - { "Terratec Cinergy T USB XXS/ T3", - { &dib0700_usb_id_table[33], - &dib0700_usb_id_table[52], NULL }, - { NULL }, - }, { "Elgato EyeTV DTT", { &dib0700_usb_id_table[49], NULL }, { NULL }, @@ -2343,8 +2338,10 @@ struct dvb_usb_device_properties dib0700_devices[] = { { &dib0700_usb_id_table[59], NULL }, { NULL }, }, - { "Terratec Cinergy T USB XXS (HD)", - { &dib0700_usb_id_table[34], &dib0700_usb_id_table[60] }, + { "Terratec Cinergy T USB XXS (HD)/ T3", + { &dib0700_usb_id_table[33], + &dib0700_usb_id_table[52], + &dib0700_usb_id_table[60], NULL}, { NULL }, }, }, -- cgit v0.10.2 From 7646b9de26c54cf4bc9c446d7ada9f91ece31e0a Mon Sep 17 00:00:00 2001 From: Martin Samek Date: Wed, 30 Sep 2009 22:59:09 -0300 Subject: V4L/DVB (13079): dib0700: fixed xc2028 firmware loading kernel oops Fixing kernel oops when driver attemps to load xc2028 firmware. Note by djh: the patch contribute by Martin is a port of a fix I made during the PCTV 340e development. It's a temporary workaround that fixes a regression (an OOPS condition) and the real fix should be in the code that manages the i2c master on the dib7000p. But this fix does address the immmediate regression and should be merged upstream until we do a cleaner fix. Signed-off-by: Martin Samek Signed-off-by: Devin Heitmueller CC: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/frontends/dib7000p.c b/drivers/media/dvb/frontends/dib7000p.c index 55ef6ee..0781f94 100644 --- a/drivers/media/dvb/frontends/dib7000p.c +++ b/drivers/media/dvb/frontends/dib7000p.c @@ -1375,6 +1375,11 @@ struct dvb_frontend * dib7000p_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, if (dib7000p_identify(st) != 0) goto error; + /* FIXME: make sure the dev.parent field is initialized, or else + request_firmware() will hit an OOPS (this should be moved somewhere + more common) */ + st->i2c_master.gated_tuner_i2c_adap.dev.parent = i2c_adap->dev.parent; + dibx000_init_i2c_master(&st->i2c_master, DIB7000P, st->i2c_adap, st->i2c_addr); dib7000p_demod_reset(st); -- cgit v0.10.2 From 4d8317876d5f53ef792e90f89d8f162d7bca5c81 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 27 Sep 2009 14:05:12 -0300 Subject: V4L/DVB (13107): tda18271: fix overflow in FM radio frequency calculation Multiplication by 62500 causes an overflow in the 32 bit freq variable, which is later divided by 1000 when using FM radio. This patch prevents the overflow by scaling the frequency value correctly upfront. Thanks to Henk Vergonet for spotting the problem and providing a preliminary patch, which this changeset was based upon. Cc: Henk Vergonet Signed-off-by: Michael Krufky CC: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/common/tuners/tda18271-fe.c b/drivers/media/common/tuners/tda18271-fe.c index 6459511..cccaf16 100644 --- a/drivers/media/common/tuners/tda18271-fe.c +++ b/drivers/media/common/tuners/tda18271-fe.c @@ -1000,12 +1000,12 @@ static int tda18271_set_analog_params(struct dvb_frontend *fe, struct tda18271_std_map_item *map; char *mode; int ret; - u32 freq = params->frequency * 62500; + u32 freq = params->frequency * 125 * + ((params->mode == V4L2_TUNER_RADIO) ? 1 : 1000) / 2; priv->mode = TDA18271_ANALOG; if (params->mode == V4L2_TUNER_RADIO) { - freq = freq / 1000; map = &std_map->fm_radio; mode = "fm"; } else if (params->std & V4L2_STD_MN) { -- cgit v0.10.2 From a57c1dcb93e43357ed3f666e5a2b5d5071dd3930 Mon Sep 17 00:00:00 2001 From: Seth Barry Date: Sun, 27 Sep 2009 16:42:29 -0300 Subject: V4L/DVB (13109): tda18271: fix signedness issue in tda18271_rf_tracking_filters_init While having tda18271 module set with debug=17 (cal & info prints) and cal=0 (delay calibration process until first use) - I discovered that during the calibration process, if the frequency test for 69750000 returned a bcal of 0 (see tda18721-fe.c in tda18271_powerscan func) that the tuner wouldn't be able to pickup any of the frequencies in the range (all the other frequencies bands returned bcal=1). I spent some time going over the code and the NXP's tda18271 spec (ver.4 of it i think) and adding a lot of debug prints and walking/stepping through the calibration process. I found that when the powerscan fails to find a frequency, the rf calibration is not run and the default value is supposed to be used in its place (pulled from the RF_CAL_map table) - but something was getting goofed up there. Now, my c coding skills are very rusty, but i think root of the problem is a signedness issue with the math operation for calculating the rf_a1 and rf_a2 values in tda18271_rf_tracking_filters_init func, which results in values like 20648 for rf_a1 (when it should probably have a value like 0, or so slightly negative that it should be zero - this bad value for rf_a1 would in turn makes the approx calc within tda18271c2_rf_tracking_filters_correction go out of whack). The simplest solution i found was to explicitly convert the signedness of the denominator to avoid the implicit conversion. The values placed into the u32 rf_freq array should never exceed about 900mhz, so i think the s32 max value shouldn't be an issue in this case. I've tested it out a little, and even when i get a bcal=0 with the modified code, the default calibration value gets used, rf_a1 is zero, and the tuner seems to lock on the stream and mythtv seems to play it fine. Signed-off-by: Seth Barry Signed-off-by: Michael Krufky CC: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/common/tuners/tda18271-fe.c b/drivers/media/common/tuners/tda18271-fe.c index cccaf16..3a50ce9 100644 --- a/drivers/media/common/tuners/tda18271-fe.c +++ b/drivers/media/common/tuners/tda18271-fe.c @@ -616,13 +616,13 @@ static int tda18271_rf_tracking_filters_init(struct dvb_frontend *fe, u32 freq) case RF2: map[i].rf_a1 = (prog_cal[RF2] - prog_tab[RF2] - prog_cal[RF1] + prog_tab[RF1]) / - ((rf_freq[RF2] - rf_freq[RF1]) / 1000); + (s32)((rf_freq[RF2] - rf_freq[RF1]) / 1000); map[i].rf2 = rf_freq[RF2] / 1000; break; case RF3: map[i].rf_a2 = (prog_cal[RF3] - prog_tab[RF3] - prog_cal[RF2] + prog_tab[RF2]) / - ((rf_freq[RF3] - rf_freq[RF2]) / 1000); + (s32)((rf_freq[RF3] - rf_freq[RF2]) / 1000); map[i].rf_b2 = prog_cal[RF2] - prog_tab[RF2]; map[i].rf3 = rf_freq[RF3] / 1000; break; -- cgit v0.10.2 From 1381dfd5150cfbdb5fa55ce7ab5ab56812111909 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 4 Oct 2009 14:04:47 -0300 Subject: V4L/DVB (13122): gscpa - stv06xx + ov518: dont discard every other frame When we call gspca_frame_add, it returns a pointer to the frame passed in, unless we call it with LAST_PACKET, when it will return a pointer to a new frame in which to store the frame data for the next frame. The frame pointer was not updated in stv06xx and ov518. Signed-off-by: Hans de Goede Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c index 2f6e135..a5c190e 100644 --- a/drivers/media/video/gspca/ov519.c +++ b/drivers/media/video/gspca/ov519.c @@ -2919,7 +2919,7 @@ static void ov518_pkt_scan(struct gspca_dev *gspca_dev, /* A false positive here is likely, until OVT gives me * the definitive SOF/EOF format */ if ((!(data[0] | data[1] | data[2] | data[3] | data[5])) && data[6]) { - gspca_frame_add(gspca_dev, LAST_PACKET, frame, data, 0); + frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame, data, 0); gspca_frame_add(gspca_dev, FIRST_PACKET, frame, data, 0); sd->packet_nr = 0; } diff --git a/drivers/media/video/gspca/stv06xx/stv06xx.c b/drivers/media/video/gspca/stv06xx/stv06xx.c index 65489d6..bfae63f 100644 --- a/drivers/media/video/gspca/stv06xx/stv06xx.c +++ b/drivers/media/video/gspca/stv06xx/stv06xx.c @@ -394,7 +394,8 @@ frame_data: PDEBUG(D_PACK, "End of frame detected"); /* Complete the last frame (if any) */ - gspca_frame_add(gspca_dev, LAST_PACKET, frame, data, 0); + frame = gspca_frame_add(gspca_dev, LAST_PACKET, + frame, data, 0); if (chunk_len) PDEBUG(D_ERR, "Chunk length is " -- cgit v0.10.2 From 8cf1fec877c102beeae1e13624b1f7d20abbf8f9 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 5 Oct 2009 12:51:47 -0300 Subject: V4L/DVB (13129): sh_mobile_ceu_camera: fix cropping for scaling clients Fix a bug in cropping calculation, when the client is also scaling the image. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c index 65ac474..2f78b4f 100644 --- a/drivers/media/video/sh_mobile_ceu_camera.c +++ b/drivers/media/video/sh_mobile_ceu_camera.c @@ -1173,8 +1173,8 @@ static int get_scales(struct soc_camera_device *icd, width_in = scale_up(cam->ceu_rect.width, *scale_h); height_in = scale_up(cam->ceu_rect.height, *scale_v); - *scale_h = calc_generic_scale(cam->ceu_rect.width, icd->user_width); - *scale_v = calc_generic_scale(cam->ceu_rect.height, icd->user_height); + *scale_h = calc_generic_scale(width_in, icd->user_width); + *scale_v = calc_generic_scale(height_in, icd->user_height); return 0; } -- cgit v0.10.2 From 07bc46e6671b4533a5e56607ddec9de9079c1844 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 5 Oct 2009 12:54:34 -0300 Subject: V4L/DVB (13131): pxa_camera: fix camera pixel format configuration A missed conversion prevents correct pixel format negotiation with client drivers. Reported-by: Antonio Ospite Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c index 6952e96..aa831d5 100644 --- a/drivers/media/video/pxa_camera.c +++ b/drivers/media/video/pxa_camera.c @@ -1432,7 +1432,9 @@ static int pxa_camera_set_fmt(struct soc_camera_device *icd, icd->sense = &sense; cam_f.fmt.pix.pixelformat = cam_fmt->fourcc; - ret = v4l2_subdev_call(sd, video, s_fmt, f); + ret = v4l2_subdev_call(sd, video, s_fmt, &cam_f); + cam_f.fmt.pix.pixelformat = pix->pixelformat; + *pix = cam_f.fmt.pix; icd->sense = NULL; -- cgit v0.10.2 From 76823b791d867c2ab563c237f188d0cbb4ced6e1 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 5 Oct 2009 12:54:54 -0300 Subject: V4L/DVB (13132): fix use-after-free Oops, resulting from a driver-core API change Commit b4028437876866aba4747a655ede00f892089e14 has broken again re-use of device objects across device_register() / device_unregister() cycles. Fix soc-camera by nullifying the struct after device_unregister(). Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c index 59aa7a3..36e617bd 100644 --- a/drivers/media/video/soc_camera.c +++ b/drivers/media/video/soc_camera.c @@ -1160,13 +1160,15 @@ void soc_camera_host_unregister(struct soc_camera_host *ici) if (icd->iface == ici->nr) { /* The bus->remove will be called */ device_unregister(&icd->dev); - /* Not before device_unregister(), .remove - * needs parent to call ici->ops->remove() */ - icd->dev.parent = NULL; - - /* If the host module is loaded again, device_register() - * would complain "already initialised" */ - memset(&icd->dev.kobj, 0, sizeof(icd->dev.kobj)); + /* + * Not before device_unregister(), .remove + * needs parent to call ici->ops->remove(). + * If the host module is loaded again, device_register() + * would complain "already initialised," since 2.6.32 + * this is also needed to prevent use-after-free of the + * device private data. + */ + memset(&icd->dev, 0, sizeof(icd->dev)); } } -- cgit v0.10.2 From e0a7e8a621666f9ce1373270bae061f92a2a2b87 Mon Sep 17 00:00:00 2001 From: HIRANO Takahito Date: Sun, 20 Sep 2009 08:57:49 -0300 Subject: V4L/DVB (13167): pt1: Fix a compile error on arm The lack of #include caused a compile error on some architectures. Signed-off-by: HIRANO Takahito Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/pt1/pt1.c b/drivers/media/dvb/pt1/pt1.c index 81e623a..1fd8306 100644 --- a/drivers/media/dvb/pt1/pt1.c +++ b/drivers/media/dvb/pt1/pt1.c @@ -27,6 +27,7 @@ #include #include #include +#include #include "dvbdev.h" #include "dvb_demux.h" -- cgit v0.10.2 From 66349b4e7ab3825dbfc167a5f0309792a587adb7 Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Mon, 21 Sep 2009 12:09:08 -0300 Subject: V4L/DVB (13169): bttv: Fix potential out-of-order field processing There is a subtle interaction in the bttv driver which can result in fields being repeatedly processed out of order. This is a problem specifically when running in V4L2_FIELD_ALTERNATE mode (probably the most common case). 1. The determination of which fields are associated with which buffers happens in videobuf, before the bttv driver gets a chance to queue the corresponding DMA. Thus by the point when the DMA is queued for a given buffer, the algorithm has to do the queuing based on the buffer's already assigned field type - not based on which field is "next" in the video stream. 2. The driver normally tries to queue both the top and bottom fields at the same time (see bttv_irq_next_video()). It tries to sort out top vs bottom by looking at the field type for the next 2 available buffers and assigning them appropriately. 3. However the bttv driver *always* actually processes the top field first. There's even an interrupt set aside for specifically recognizing when the top field has been processed so that it can be marked done even while the bottom field is still being DMAed. Given all of the above, if one gets into a situation where bttv_irq_next_video() gets entered when the first available buffer has been pre-associated as a bottom field, then the function is going to process the buffers out of order. That first available buffer will be put into the bottom field slot and the buffer after that will be put into the top field slot. Problem is, since the top field is always processed first by the driver, then that second buffer (the one after the first available buffer) will be the first one to be finished. Because of the strict fifo handling of all video buffers, then that top field won't be seen by the app until after the bottom field is also processed. Worse still, the app will get back the chronologically later bottom field first, *before* the top field is received. The buffer's timestamps will even be backwards. While not fatal to most TV apps, this behavior can subtlely degrade userspace deinterlacing (probably will cause jitter). That's probably why it has gone unnoticed. But it will also cause serious problems if the app in question discards all but the latest received buffer (a latency minimizing tactic) - causing one field to only ever be displayed since the other is now always late. Unfortunately once you get into this state, you're stuck this way - because having consumed two buffers, now the next time around the "first" available buffer will again be a bottom field and the same thing happens. How can we get into this state? In a perfect world, where there's always a few free buffers queued to the driver, it should be impossible. However if something disrupts streaming, e.g. if the userspace app can't queue free buffers fast enough for a moment due perhaps to a CPU scheduling glitch, then the driver can get momentarily starved and some number of fields will be dropped. That's OK. But if an odd number of fields get dropped, then that "first" available buffer might be the bottom field and now we're stuck... This patch fixes that problem by deliberately only setting up a single field for one frame if we don't get a top field as the first available buffer. By purposely skipping the other field, then we only handle a single buffer thus bringing things back into proper sync (i.e. top field first) for the next frame. To do this we just drop the few lines in bttv_irq_next_video() that attempt to set up the second buffer when that second buffer isn't for the bottom field. This is definitely a problem in when in V4L2_FIELD_ALTERNATE mode. In the other modes this change either has no effect or doesn't harm things any further anyway. Signed-off-by: Mike Isely CC: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c index 939d1e5..3ff84c8 100644 --- a/drivers/media/video/bt8xx/bttv-driver.c +++ b/drivers/media/video/bt8xx/bttv-driver.c @@ -3800,11 +3800,34 @@ bttv_irq_next_video(struct bttv *btv, struct bttv_buffer_set *set) if (!V4L2_FIELD_HAS_BOTH(item->vb.field) && (item->vb.queue.next != &btv->capture)) { item = list_entry(item->vb.queue.next, struct bttv_buffer, vb.queue); + /* Mike Isely - Only check + * and set up the bottom field in the logic + * below. Don't ever do the top field. This + * of course means that if we set up the + * bottom field in the above code that we'll + * actually skip a field. But that's OK. + * Having processed only a single buffer this + * time, then the next time around the first + * available buffer should be for a top field. + * That will then cause us here to set up a + * top then a bottom field in the normal way. + * The alternative to this understanding is + * that we set up the second available buffer + * as a top field, but that's out of order + * since this driver always processes the top + * field first - the effect will be the two + * buffers being returned in the wrong order, + * with the second buffer also being delayed + * by one field time (owing to the fifo nature + * of videobuf). Worse still, we'll be stuck + * doing fields out of order now every time + * until something else causes a field to be + * dropped. By effectively forcing a field to + * drop this way then we always get back into + * sync within a single frame time. (Out of + * order fields can screw up deinterlacing + * algorithms.) */ if (!V4L2_FIELD_HAS_BOTH(item->vb.field)) { - if (NULL == set->top && - V4L2_FIELD_TOP == item->vb.field) { - set->top = item; - } if (NULL == set->bottom && V4L2_FIELD_BOTTOM == item->vb.field) { set->bottom = item; -- cgit v0.10.2 From 2de26c0a4a218a351bb1970eeaddf2905b47ff13 Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Mon, 21 Sep 2009 12:42:22 -0300 Subject: V4L/DVB (13170): bttv: Fix reversed polarity error when switching video standard The bttv driver function which handles switching of the video standard (set_tvnorm() in bttv-driver.c) includes a check which can optionally also reset the cropping configuration to a default value. It is "optional" based on a comparison of the cropcap parameters of the previous vs the newly requested video standard. The comparison is being done with a memcmp(), a function which only returns a true value if the comparison actually fails. This if-statement appears to have been written to assume wrong memcmp() semantics. That is, it was re-initializing the cropping configuration only if the new video standard did NOT have different cropcap values. That doesn't make any sense. One definitely should reset things if the cropcap parameters are different - if there's any comparison to made at all. The effect of this problem was that a transition from, say, PAL to NTSC would leave in place old cropping setup that made sense for the PAL geometry but not for NTSC. If the application doesn't care about cropping it also won't try to reset the cropping configuration, resulting in an improperly cropped video frame. In the case I was testing this actually caused black video frames to be displayed. Another interesting effect of this bug is that if one does something which does NOT change the video standard and this function is run, then the cropping setup gets reset anyway - again because of the backwards comparison. It turns out that just running anything which merely opens and closes the video device node (e.g. v4l-info) will cause this to happen. One can argue that simply opening the device node and not doing anything to it should not mess with any of its state - but because of this behavior, any TV app which does such things (e.g. xawtv) probably therefore doesn't see the problem. The solution is to fix the sense of the if-statement. It's easy to see how this mistake could have been made given how memcmp() works. The patch is therefore removal of a single "!" character from the if-statement in set_tvnorm in bttv-driver.c. Signed-off-by: Mike Isely CC: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c index 3ff84c8..a672401 100644 --- a/drivers/media/video/bt8xx/bttv-driver.c +++ b/drivers/media/video/bt8xx/bttv-driver.c @@ -1299,7 +1299,7 @@ set_tvnorm(struct bttv *btv, unsigned int norm) tvnorm = &bttv_tvnorms[norm]; - if (!memcmp(&bttv_tvnorms[btv->tvnorm].cropcap, &tvnorm->cropcap, + if (memcmp(&bttv_tvnorms[btv->tvnorm].cropcap, &tvnorm->cropcap, sizeof (tvnorm->cropcap))) { bttv_crop_reset(&btv->crop[0], norm); btv->crop[1] = btv->crop[0]; /* current = default */ -- cgit v0.10.2 From 96fbf771d86a90ff006bc62ca4d4de6474b3de31 Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Thu, 15 Oct 2009 01:14:34 -0300 Subject: V4L/DVB (13190): em28xx: fix panic that can occur when starting audio streaming Because the counters were not reset when starting up streaming, they would be reused from the previous run. This can result in cases such that when the second instance of streaming starts up, the "cnt" variable in em28xx_audio_isocirq() can end up being negative, resulting in attempting to write to memory before the start of runtime->dma_area (as well as having a negative number of bytes to copy). Signed-off-by: Devin Heitmueller CC: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/em28xx/em28xx-audio.c b/drivers/media/video/em28xx/em28xx-audio.c index 7bd8a70..ac947ae 100644 --- a/drivers/media/video/em28xx/em28xx-audio.c +++ b/drivers/media/video/em28xx/em28xx-audio.c @@ -383,6 +383,11 @@ static int snd_em28xx_hw_capture_free(struct snd_pcm_substream *substream) static int snd_em28xx_prepare(struct snd_pcm_substream *substream) { + struct em28xx *dev = snd_pcm_substream_chip(substream); + + dev->adev.hwptr_done_capture = 0; + dev->adev.capture_transfer_done = 0; + return 0; } -- cgit v0.10.2 From 78c948ab0cc44f9c8ae397d7d9d217bb498bfa2f Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Wed, 21 Oct 2009 18:27:29 -0300 Subject: V4L/DVB (13202): smsusb: add autodetection support for three additional Hauppauge USB IDs Add support for three new Hauppauge Device USB IDs: 2040:b900 2040:b910 2040:c000 Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/siano/smsusb.c b/drivers/media/dvb/siano/smsusb.c index cb8a358..8f88a58 100644 --- a/drivers/media/dvb/siano/smsusb.c +++ b/drivers/media/dvb/siano/smsusb.c @@ -529,6 +529,12 @@ struct usb_device_id smsusb_id_table[] = { .driver_info = SMS1XXX_BOARD_SIANO_NICE }, { USB_DEVICE(0x187f, 0x0301), .driver_info = SMS1XXX_BOARD_SIANO_VENICE }, + { USB_DEVICE(0x2040, 0xb900), + .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, + { USB_DEVICE(0x2040, 0xb910), + .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, + { USB_DEVICE(0x2040, 0xc000), + .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, { } /* Terminating entry */ }; -- cgit v0.10.2 From 1f95725755ab67f3198df3b5bf7517f926f310ca Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Wed, 23 Sep 2009 18:06:57 -0300 Subject: V4L/DVB (13230): s2255drv: Don't conditionalize video buffer completion on waiting processes The s2255 driver had logic which aborted processing of a video frame if there was no process waiting on the video buffer in question. That simply doesn't work when the application is doing things in an asynchronous manner. If the application went to the trouble to queue the buffer in the first place, then the driver should always attempt to complete it - even if the application at that moment has its attention turned elsewhere. Applications which always blocked waiting for I/O on the capture device would not have been affected by this. Applications which *mostly* blocked waiting for I/O on the capture device probably only would have been somewhat affected (frame lossage, at a rate which goes up as the application blocks less). Applications which never blocked on the capture device (e.g. polling only) however would never have been able to receive any video frames, since in that case this "is anyone waiting on this?" check on the buffer never would have evalutated true. This patch just deletes that harmful check against the buffer's wait queue. Signed-off-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab CC: stable@kernel.org diff --git a/drivers/media/video/s2255drv.c b/drivers/media/video/s2255drv.c index 9e3262c..2c0bb06 100644 --- a/drivers/media/video/s2255drv.c +++ b/drivers/media/video/s2255drv.c @@ -598,11 +598,6 @@ static int s2255_got_frame(struct s2255_dev *dev, int chn, int jpgsize) buf = list_entry(dma_q->active.next, struct s2255_buffer, vb.queue); - if (!waitqueue_active(&buf->vb.done)) { - /* no one active */ - rc = -1; - goto unlock; - } list_del(&buf->vb.queue); do_gettimeofday(&buf->vb.ts); dprintk(100, "[%p/%d] wakeup\n", buf, buf->vb.i); -- cgit v0.10.2 From c94115ffc4d76089b26eee4d1cb56f1f6b631bd2 Mon Sep 17 00:00:00 2001 From: Henrik Kurelid Date: Sat, 3 Oct 2009 05:37:58 -0300 Subject: V4L/DVB (13237): firedtv: length field corrupt in ca2host if length>127 This solves a problem in firedtv that has become major for Swedish DVB-T users the last month or so. It will most likely solve issues seen by other users as well. If the length of an AVC message is greater than 127, the length field should be encoded in LV mode instead of V mode. V mode can only be used if the length is 127 or less. This patch ensures that the CA_PMT message is always encoded in LV mode so PMT message of greater lengths can be supported. Signed-off-by: Henrik Kurelid Signed-off-by: Stefan Richter Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/firewire/firedtv-avc.c b/drivers/media/dvb/firewire/firedtv-avc.c index d1b67fe..485d061 100644 --- a/drivers/media/dvb/firewire/firedtv-avc.c +++ b/drivers/media/dvb/firewire/firedtv-avc.c @@ -1050,28 +1050,28 @@ int avc_ca_pmt(struct firedtv *fdtv, char *msg, int length) c->operand[4] = 0; /* slot */ c->operand[5] = SFE_VENDOR_TAG_CA_PMT; /* ca tag */ c->operand[6] = 0; /* more/last */ - /* c->operand[7] = XXXprogram_info_length + 17; */ /* length */ - c->operand[8] = list_management; - c->operand[9] = 0x01; /* pmt_cmd=OK_descramble */ + /* Use three bytes for length field in case length > 127 */ + c->operand[10] = list_management; + c->operand[11] = 0x01; /* pmt_cmd=OK_descramble */ /* TS program map table */ - c->operand[10] = 0x02; /* Table id=2 */ - c->operand[11] = 0x80; /* Section syntax + length */ - /* c->operand[12] = XXXprogram_info_length + 12; */ - c->operand[13] = msg[1]; /* Program number */ - c->operand[14] = msg[2]; - c->operand[15] = 0x01; /* Version number=0 + current/next=1 */ - c->operand[16] = 0x00; /* Section number=0 */ - c->operand[17] = 0x00; /* Last section number=0 */ - c->operand[18] = 0x1f; /* PCR_PID=1FFF */ - c->operand[19] = 0xff; - c->operand[20] = (program_info_length >> 8); /* Program info length */ - c->operand[21] = (program_info_length & 0xff); + c->operand[12] = 0x02; /* Table id=2 */ + c->operand[13] = 0x80; /* Section syntax + length */ + /* c->operand[14] = XXXprogram_info_length + 12; */ + c->operand[15] = msg[1]; /* Program number */ + c->operand[16] = msg[2]; + c->operand[17] = 0x01; /* Version number=0 + current/next=1 */ + c->operand[18] = 0x00; /* Section number=0 */ + c->operand[19] = 0x00; /* Last section number=0 */ + c->operand[20] = 0x1f; /* PCR_PID=1FFF */ + c->operand[21] = 0xff; + c->operand[22] = (program_info_length >> 8); /* Program info length */ + c->operand[23] = (program_info_length & 0xff); /* CA descriptors at programme level */ read_pos = 6; - write_pos = 22; + write_pos = 24; if (program_info_length > 0) { pmt_cmd_id = msg[read_pos++]; if (pmt_cmd_id != 1 && pmt_cmd_id != 4) @@ -1113,8 +1113,10 @@ int avc_ca_pmt(struct firedtv *fdtv, char *msg, int length) c->operand[write_pos++] = 0x00; c->operand[write_pos++] = 0x00; - c->operand[7] = write_pos - 8; - c->operand[12] = write_pos - 13; + c->operand[7] = 0x82; + c->operand[8] = (write_pos - 10) >> 8; + c->operand[9] = (write_pos - 10) & 0xff; + c->operand[14] = write_pos - 15; crc32_csum = crc32_be(0, &c->operand[10], c->operand[12] - 1); c->operand[write_pos - 4] = (crc32_csum >> 24) & 0xff; -- cgit v0.10.2 From dcff9cfe432c74b382cea327509ede2e114b1615 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sat, 17 Oct 2009 17:46:25 -0300 Subject: V4L/DVB (13240): firedtv: fix regression: tuning fails due to bogus error return Since 2.6.32(-rc1), DVB core checks the return value of dvb_frontend_ops.set_frontend. Now it becomes apparent that firedtv always returned a bogus value from its set_frontend method. CC: stable@kernel.org Signed-off-by: Stefan Richter Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/firewire/firedtv-fe.c b/drivers/media/dvb/firewire/firedtv-fe.c index 7ba4363..e49cdc8 100644 --- a/drivers/media/dvb/firewire/firedtv-fe.c +++ b/drivers/media/dvb/firewire/firedtv-fe.c @@ -141,18 +141,12 @@ static int fdtv_read_uncorrected_blocks(struct dvb_frontend *fe, u32 *ucblocks) return -EOPNOTSUPP; } -#define ACCEPTED 0x9 - static int fdtv_set_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) { struct firedtv *fdtv = fe->sec_priv; - /* FIXME: avc_tuner_dsd never returns ACCEPTED. Check status? */ - if (avc_tuner_dsd(fdtv, params) != ACCEPTED) - return -EINVAL; - else - return 0; /* not sure of this... */ + return avc_tuner_dsd(fdtv, params); } static int fdtv_get_frontend(struct dvb_frontend *fe, -- cgit v0.10.2 From b6ef8836c1ff5199abd40cfba162052bc7e8af00 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Erik=20Andr=C3=A9n?= Date: Sun, 27 Sep 2009 10:11:43 -0300 Subject: V4L/DVB (13255): gspca - m5602-s5k4aa: Add vflip quirk for the Bruneinit laptop MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Adds a vflip quirk for the Bruneinit laptop. Thanks to Jörg for the report Signed-off-by: Erik Andrén Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c index 59400e8..f580b61 100644 --- a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c +++ b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c @@ -35,6 +35,13 @@ static const struct dmi_system_id s5k4aa_vflip_dmi_table[] = { { + .ident = "BRUNEINIT", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "BRUNENIT"), + DMI_MATCH(DMI_PRODUCT_NAME, "BRUNENIT"), + DMI_MATCH(DMI_BOARD_VERSION, "00030D0000000001") + } + }, { .ident = "Fujitsu-Siemens Amilo Xa 2528", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), -- cgit v0.10.2 From 2339a1887dab469bb4bae56aa7eca3a5e05ecde7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Erik=20Andr=C3=A9n?= Date: Sun, 27 Sep 2009 10:20:21 -0300 Subject: V4L/DVB (13256): gspca - m5602-s5k4aa: Add another MSI GX700 vflip quirk MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Adds another vflip quirk for the MSI GX700. Thanks to John Katzmaier for reporting. Signed-off-by: Erik Andrén Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c index f580b61..ef4ae68 100644 --- a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c +++ b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c @@ -64,6 +64,13 @@ static .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star International"), DMI_MATCH(DMI_PRODUCT_NAME, "GX700"), + DMI_MATCH(DMI_BIOS_DATE, "12/02/2008") + } + }, { + .ident = "MSI GX700", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star International"), + DMI_MATCH(DMI_PRODUCT_NAME, "GX700"), DMI_MATCH(DMI_BIOS_DATE, "07/26/2007") } }, { -- cgit v0.10.2 From 81191f694cb507c49d3c7aa6238dcc0a83ad4001 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Erik=20Andr=C3=A9n?= Date: Sat, 3 Oct 2009 10:01:41 -0300 Subject: V4L/DVB (13257): gspca - m5602-s5k4aa: Add vflip for Fujitsu Amilo Xi 2528 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Adds a vflip quirk for the Fujitsu Amilo Xi 2528. Thanks to Evgeny for the report. Signed-off-by: Erik Andrén Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c index ef4ae68..a27afeb 100644 --- a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c +++ b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c @@ -48,6 +48,12 @@ static DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xa 2528") } }, { + .ident = "Fujitsu-Siemens Amilo Xi 2528", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 2528") + } + }, { .ident = "Fujitsu-Siemens Amilo Xi 2550", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), -- cgit v0.10.2 From 32345b059676169444d8d3c4a59009adcdf93885 Mon Sep 17 00:00:00 2001 From: Theodore Kilgore Date: Sun, 1 Nov 2009 12:59:42 -0300 Subject: V4L/DVB (13264): gspca_mr97310a: Change vstart for CIF sensor type 1 cams gspca_mr97310a: Change vstart for CIF sensor type 1 cams This fixes the distortion at the end of the frame, and avoids the bad frame dropping done because of this distortion, trippling the framerate! Signed-off-by: Theodore Kilgore Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/gspca/mr97310a.c b/drivers/media/video/gspca/mr97310a.c index 140c8f3..f8328b9 100644 --- a/drivers/media/video/gspca/mr97310a.c +++ b/drivers/media/video/gspca/mr97310a.c @@ -483,7 +483,7 @@ static int start_cif_cam(struct gspca_dev *gspca_dev) data[3] = 0x2c; /* reg 2, H size/8 */ data[4] = 0x48; /* reg 3, V size/4 */ data[6] = 0x06; /* reg 5, H start */ - data[8] = 0x06 + sd->sensor_type; /* reg 7, V start */ + data[8] = 0x06 - sd->sensor_type; /* reg 7, V start */ break; } err_code = mr_write(gspca_dev, 11); -- cgit v0.10.2 From d514edac5df2149207f1ae2f52de63882c692eec Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Wed, 4 Nov 2009 14:18:04 -0300 Subject: V4L/DVB (13286): pxa-camera: Fix missing sched.h Required for wakeup call. Signed-off-by: Jonathan Cameron Acked-by: Guennadi Liakhovetski Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c index aa831d5..51b683c 100644 --- a/drivers/media/video/pxa_camera.c +++ b/drivers/media/video/pxa_camera.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include -- cgit v0.10.2 From 7157fbd0ed1a00024fb915cfa5ed93fb4ce9dfaf Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 4 Nov 2009 15:26:59 -0300 Subject: V4L/DVB (13287): ce6230 - saa7164-cmd: Fix wrong sizeof Which is why I have always preferred sizeof(struct foo) over sizeof(var). Cc: Antti Palosaari Acked-by: Steven Toth Signed-off-by: Jean Delvare Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/ce6230.c b/drivers/media/dvb/dvb-usb/ce6230.c index 0737c63..3df2045 100644 --- a/drivers/media/dvb/dvb-usb/ce6230.c +++ b/drivers/media/dvb/dvb-usb/ce6230.c @@ -105,7 +105,7 @@ static int ce6230_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int i = 0; struct req_t req; int ret = 0; - memset(&req, 0, sizeof(&req)); + memset(&req, 0, sizeof(req)); if (num > 2) return -EINVAL; diff --git a/drivers/media/video/saa7164/saa7164-cmd.c b/drivers/media/video/saa7164/saa7164-cmd.c index c45966e..9c1d3ac 100644 --- a/drivers/media/video/saa7164/saa7164-cmd.c +++ b/drivers/media/video/saa7164/saa7164-cmd.c @@ -347,7 +347,7 @@ int saa7164_cmd_send(struct saa7164_dev *dev, u8 id, tmComResCmd_t command, /* Prepare some basic command/response structures */ memset(&command_t, 0, sizeof(command_t)); - memset(&response_t, 0, sizeof(&response_t)); + memset(&response_t, 0, sizeof(response_t)); pcommand_t = &command_t; presponse_t = &response_t; command_t.id = id; -- cgit v0.10.2 From a2e35af6c756b5fa827fec5e0431cf2ce449beef Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 4 Nov 2009 11:09:12 -0300 Subject: V4L/DVB (13309): uvcvideo: Ignore the FIX_BANDWIDTH for compressed video The FIX_BANDWIDTH quirk tries to work around cameras requesting the maximum bandwidth regardless of the image size by computing a bandwidth estimate. This works only for uncompressed frames. Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c index f960e8e..a6e41d1 100644 --- a/drivers/media/video/uvc/uvc_video.c +++ b/drivers/media/video/uvc/uvc_video.c @@ -90,7 +90,8 @@ static void uvc_fixup_video_ctrl(struct uvc_streaming *stream, ctrl->dwMaxVideoFrameSize = frame->dwMaxVideoFrameBufferSize; - if (stream->dev->quirks & UVC_QUIRK_FIX_BANDWIDTH && + if (!(format->flags & UVC_FMT_FLAG_COMPRESSED) && + stream->dev->quirks & UVC_QUIRK_FIX_BANDWIDTH && stream->intf->num_altsetting > 1) { u32 interval; u32 bandwidth; -- cgit v0.10.2 From 2e8961330ec4b558a0f4db18ab5fb566842f492b Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 4 Nov 2009 13:11:10 -0300 Subject: V4L/DVB (13311): uvcvideo: Fix compilation warning with 2.6.32 due to type mismatch with abs() The abs() macro has changed in 2.6.32 and returns a long instead of an int. Fix the driver to avoid compilation warnings. Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c index c3225a5..1b89735 100644 --- a/drivers/media/video/uvc/uvc_ctrl.c +++ b/drivers/media/video/uvc/uvc_ctrl.c @@ -348,7 +348,7 @@ static void uvc_ctrl_set_zoom(struct uvc_control_mapping *mapping, __s32 value, __u8 *data) { data[0] = value == 0 ? 0 : (value > 0) ? 1 : 0xff; - data[2] = min(abs(value), 0xff); + data[2] = min((int)abs(value), 0xff); } static struct uvc_control_mapping uvc_ctrl_mappings[] = { -- cgit v0.10.2 From 4007a672abd88091e3cced158ec491d41c0c454c Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Wed, 4 Nov 2009 14:19:35 -0300 Subject: V4L/DVB (13313): saa7134: add support for FORCE_TS_VALID mode for mpeg ts input When FORCE_TS_VALID mode is enabled, the saa713x will accept MPEG TS input without requiring TS_VALID set high. This is required for some new boards to function properly, due to the hardware design implementation. The configuration is toggled within the board setup configuration. Boards that do not have this bit set will function as before with no change. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/saa7134/saa7134-ts.c b/drivers/media/video/saa7134/saa7134-ts.c index 3fa6522..03488ba 100644 --- a/drivers/media/video/saa7134/saa7134-ts.c +++ b/drivers/media/video/saa7134/saa7134-ts.c @@ -262,11 +262,13 @@ int saa7134_ts_start(struct saa7134_dev *dev) switch (saa7134_boards[dev->board].ts_type) { case SAA7134_MPEG_TS_PARALLEL: saa_writeb(SAA7134_TS_SERIAL0, 0x40); - saa_writeb(SAA7134_TS_PARALLEL, 0xec); + saa_writeb(SAA7134_TS_PARALLEL, 0xec | + (saa7134_boards[dev->board].ts_force_val << 4)); break; case SAA7134_MPEG_TS_SERIAL: saa_writeb(SAA7134_TS_SERIAL0, 0xd8); - saa_writeb(SAA7134_TS_PARALLEL, 0x6c); + saa_writeb(SAA7134_TS_PARALLEL, 0x6c | + (saa7134_boards[dev->board].ts_force_val << 4)); saa_writeb(SAA7134_TS_PARALLEL_SERIAL, 0xbc); saa_writeb(SAA7134_TS_SERIAL1, 0x02); break; diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index 6ee3e9b..f8697d4 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -360,6 +360,7 @@ struct saa7134_board { enum saa7134_mpeg_type mpeg; enum saa7134_mpeg_ts_type ts_type; unsigned int vid_port_opts; + unsigned int ts_force_val:1; }; #define card_has_radio(dev) (NULL != saa7134_boards[dev->board].radio.name) -- cgit v0.10.2 From 22370ef5035f206283505409c9a64a595c5c7320 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Wed, 4 Nov 2009 14:23:57 -0300 Subject: V4L/DVB (13314): saa7134: set ts_force_val for the Hauppauge WinTV HVR-1150 The Hauppauge WinTV HVR-1150 retail boards require the FORCE_TS_VALID bit to be set in order to function properly. This change will work on the early revisions on the board as well, but the final revision will not function without this change. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index 71145bf..0901322 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -3428,6 +3428,7 @@ struct saa7134_board saa7134_boards[] = { .tuner_config = 3, .mpeg = SAA7134_MPEG_DVB, .ts_type = SAA7134_MPEG_TS_SERIAL, + .ts_force_val = 1, .gpiomask = 0x0800100, /* GPIO 21 is an INPUT */ .inputs = {{ .name = name_tv, -- cgit v0.10.2 From e7e7e0c084ef862d5754701108d4a038514d6314 Mon Sep 17 00:00:00 2001 From: Yong Zhang Date: Sat, 7 Nov 2009 11:16:13 +0800 Subject: genirq: try_one_irq() must be called with irq disabled Prarit reported: ================================= [ INFO: inconsistent lock state ] 2.6.32-rc5 #1 --------------------------------- inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. swapper/0 [HC0[0]:SC1[1]:HE1:SE0] takes: (&irq_desc_lock_class){?.-...}, at: [] try_one_irq+0x32/0x138 {IN-HARDIRQ-W} state was registered at: [] __lock_acquire+0x2fc/0xd5d [] lock_acquire+0xf3/0x12d [] _spin_lock+0x40/0x89 [] handle_level_irq+0x30/0x105 [] handle_irq+0x95/0xb7 [] do_IRQ+0x6a/0xe0 [] ret_from_intr+0x0/0x16 irq event stamp: 195096 hardirqs last enabled at (195096): [] _spin_unlock_irq+0x3a/0x5c hardirqs last disabled at (195095): [] _spin_lock_irq+0x29/0x95 softirqs last enabled at (195088): [] __do_softirq+0x1c1/0x1ef softirqs last disabled at (195093): [] call_softirq+0x1c/0x30 other info that might help us debug this: 1 lock held by swapper/0: #0: (kernel/irq/spurious.c:21){+.-...}, at: [] run_timer_softirq+0x1a9/0x315 stack backtrace: Pid: 0, comm: swapper Not tainted 2.6.32-rc5 #1 Call Trace: [] valid_state+0x187/0x1ae [] mark_lock+0x129/0x253 [] __lock_acquire+0x370/0xd5d [] lock_acquire+0xf3/0x12d [] _spin_lock+0x40/0x89 [] try_one_irq+0x32/0x138 [] poll_all_shared_irqs+0x41/0x6d [] poll_spurious_irqs+0x1c/0x49 [] run_timer_softirq+0x239/0x315 [] __do_softirq+0x102/0x1ef [] call_softirq+0x1c/0x30 [] do_softirq+0x59/0xca [] irq_exit+0x58/0xae [] smp_apic_timer_interrupt+0x94/0xba [] apic_timer_interrupt+0x13/0x20 The reason is that try_one_irq() is called from hardirq context with interrupts disabled and from softirq context (poll_all_shared_irqs()) with interrupts enabled. Disable interrupts before calling it from poll_all_shared_irqs(). Reported-and-tested-by: Prarit Bhargava Signed-off-by: Yong Zhang LKML-Reference: <1257563773-4620-1-git-send-email-yong.zhang0@gmail.com> Signed-off-by: Thomas Gleixner diff --git a/kernel/irq/spurious.c b/kernel/irq/spurious.c index 114e704..bd7273e 100644 --- a/kernel/irq/spurious.c +++ b/kernel/irq/spurious.c @@ -121,7 +121,9 @@ static void poll_all_shared_irqs(void) if (!(status & IRQ_SPURIOUS_DISABLED)) continue; + local_irq_disable(); try_one_irq(i, desc); + local_irq_enable(); } } -- cgit v0.10.2 From 35f029e2514be209eb0e88c7d927f3bcc42a5cc2 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Sat, 7 Nov 2009 14:49:18 +0100 Subject: [ARM] kirkwood: fix PCI I/O port assignment Instead of allocating PCI devices I/O port bus addresses from the 000xxxxx I/O port range as intended, due to a bus versus physical address mixup, the Kirkwood PCIe handling code inadvertently allocated I/O port bus addresses from the f20xxxxx address range (which is the physical address range of the PCIe I/O mapping window), but then direct all I/O port accesses to bus addresses 000xxxxx, which would then not be decoded at all. Fix this by setting the base address of the PCIe I/O space struct resource to KIRKWOOD_PCIE_IO_BUS_BASE instead of the incorrect KIRKWOOD_PCIE_IO_PHYS_BASE, and fix up __io() to expect addresses offsetted by the former instead of the latter. (The suggested fix of directing I/O port accesses from the host to bus addresses f20xxxxx instead has the problem that assigning full 32bit I/O port bus addresses (f20xxxxx) doesn't work on all PCI devices, as not all PCI devices implement full 32 bit BAR registers for I/O ports. We should really try to allocate I/O port bus addresses that fit in 16 bits.) Signed-off-by: Lennert Buytenhek Signed-off-by: Nicolas Pitre diff --git a/arch/arm/mach-kirkwood/include/mach/io.h b/arch/arm/mach-kirkwood/include/mach/io.h index a643a84..44e8be0 100644 --- a/arch/arm/mach-kirkwood/include/mach/io.h +++ b/arch/arm/mach-kirkwood/include/mach/io.h @@ -15,7 +15,7 @@ static inline void __iomem *__io(unsigned long addr) { - return (void __iomem *)((addr - KIRKWOOD_PCIE_IO_PHYS_BASE) + return (void __iomem *)((addr - KIRKWOOD_PCIE_IO_BUS_BASE) + KIRKWOOD_PCIE_IO_VIRT_BASE); } diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index 5538820..0660e78 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -115,7 +115,7 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) */ res[0].name = "PCIe I/O Space"; res[0].flags = IORESOURCE_IO; - res[0].start = KIRKWOOD_PCIE_IO_PHYS_BASE; + res[0].start = KIRKWOOD_PCIE_IO_BUS_BASE; res[0].end = res[0].start + KIRKWOOD_PCIE_IO_SIZE - 1; if (request_resource(&ioport_resource, &res[0])) panic("Request PCIe IO resource failed\n"); -- cgit v0.10.2 From a1897fa67cb964cc6b5a9048a31eb6ef3dcc2dda Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Sat, 7 Nov 2009 14:50:00 +0100 Subject: [ARM] Kirkwood: clarify PCIe MEM bus/physical address distinction Signed-off-by: Lennert Buytenhek Signed-off-by: Nicolas Pitre diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c index 1da5d1c..2e69168f 100644 --- a/arch/arm/mach-kirkwood/addr-map.c +++ b/arch/arm/mach-kirkwood/addr-map.c @@ -105,7 +105,7 @@ void __init kirkwood_setup_cpu_mbus(void) setup_cpu_win(0, KIRKWOOD_PCIE_IO_PHYS_BASE, KIRKWOOD_PCIE_IO_SIZE, TARGET_PCIE, ATTR_PCIE_IO, KIRKWOOD_PCIE_IO_BUS_BASE); setup_cpu_win(1, KIRKWOOD_PCIE_MEM_PHYS_BASE, KIRKWOOD_PCIE_MEM_SIZE, - TARGET_PCIE, ATTR_PCIE_MEM, -1); + TARGET_PCIE, ATTR_PCIE_MEM, KIRKWOOD_PCIE_MEM_BUS_BASE); /* * Setup window for NAND controller. diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h index 54c1327..a15cf0e 100644 --- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h +++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h @@ -43,6 +43,7 @@ #define KIRKWOOD_REGS_SIZE SZ_1M #define KIRKWOOD_PCIE_MEM_PHYS_BASE 0xe0000000 +#define KIRKWOOD_PCIE_MEM_BUS_BASE 0xe0000000 #define KIRKWOOD_PCIE_MEM_SIZE SZ_128M /* diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index 0660e78..a604b2a 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -126,7 +126,7 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) */ res[1].name = "PCIe Memory Space"; res[1].flags = IORESOURCE_MEM; - res[1].start = KIRKWOOD_PCIE_MEM_PHYS_BASE; + res[1].start = KIRKWOOD_PCIE_MEM_BUS_BASE; res[1].end = res[1].start + KIRKWOOD_PCIE_MEM_SIZE - 1; if (request_resource(&iomem_resource, &res[1])) panic("Request PCIe Memory resource failed\n"); -- cgit v0.10.2 From ffbfe093b660ce1c9ede569ebe4f969f9003aa59 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Sat, 7 Nov 2009 20:36:02 -0500 Subject: [ARM] Kirkwood: update defconfig Signed-off-by: Nicolas Pitre diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index af74cc2..bcfade3 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -1,15 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc4 -# Mon May 4 11:58:57 2009 +# Linux kernel version: 2.6.32-rc6 +# Sat Nov 7 20:31:18 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -18,13 +16,12 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -46,11 +43,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=19 # CONFIG_GROUP_SCHED is not set @@ -73,7 +71,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -86,6 +83,10 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y @@ -95,13 +96,17 @@ CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y -# CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y CONFIG_KRETPROBES=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y @@ -114,7 +119,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -135,19 +140,22 @@ CONFIG_DEFAULT_IOSCHED="cfq" # # System Type # +CONFIG_MMU=y # CONFIG_ARCH_AAEC2000 is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -156,25 +164,27 @@ CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set CONFIG_ARCH_KIRKWOOD=y -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_LOKI is not set # CONFIG_ARCH_MV78XX0 is not set -# CONFIG_ARCH_MXC is not set # CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_MSM is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM is not set -# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_BCMRING is not set # # Marvell Kirkwood Implementations @@ -185,6 +195,7 @@ CONFIG_MACH_RD88F6281=y CONFIG_MACH_MV88F6281GTW_GE=y CONFIG_MACH_SHEEVAPLUG=y CONFIG_MACH_TS219=y +CONFIG_MACH_OPENRD_BASE=y CONFIG_PLAT_ORION=y # @@ -195,7 +206,7 @@ CONFIG_CPU_FEROCEON=y # CONFIG_CPU_FEROCEON_OLD_ID is not set CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_PABRT_LEGACY=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_COPY_FEROCEON=y CONFIG_CPU_TLB_FEROCEON=y @@ -211,6 +222,7 @@ CONFIG_ARM_THUMB=y CONFIG_OUTER_CACHE=y CONFIG_CACHE_FEROCEON_L2=y # CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 # # Bus support @@ -235,11 +247,12 @@ CONFIG_VMSPLIT_3G=y # CONFIG_VMSPLIT_2G is not set # CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set -CONFIG_ARCH_FLATMEM_HAS_HOLES=y # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set # CONFIG_HIGHMEM is not set @@ -254,10 +267,12 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ALIGNMENT_TRAP=y +CONFIG_UACCESS_WITH_MEMCPY=y # # Boot options @@ -345,6 +360,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -367,6 +383,7 @@ CONFIG_NET_DSA_MV88E6123_61_65=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -383,17 +400,18 @@ CONFIG_NET_PKTGEN=m # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y CONFIG_CFG80211=y +# CONFIG_NL80211_TESTMODE is not set +# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set # CONFIG_CFG80211_REG_DEBUG is not set +CONFIG_CFG80211_DEFAULT_PS=y +CONFIG_CFG80211_DEFAULT_PS_VALUE=1 +# CONFIG_CFG80211_DEBUGFS is not set CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y CONFIG_LIB80211=y # CONFIG_LIB80211_DEBUG is not set CONFIG_MAC80211=y - -# -# Rate control algorithm selection -# CONFIG_MAC80211_RC_MINSTREL=y # CONFIG_MAC80211_RC_DEFAULT_PID is not set CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y @@ -414,6 +432,7 @@ CONFIG_MAC80211_RC_DEFAULT="minstrel" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -425,9 +444,9 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set @@ -494,6 +513,7 @@ CONFIG_MTD_PHYSMAP=y # CONFIG_MTD_DATAFLASH is not set CONFIG_MTD_M25P80=y CONFIG_M25PXX_USE_FAST_READ=y +# CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -543,6 +563,7 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -567,10 +588,6 @@ CONFIG_BLK_DEV_SR=m # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=m # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -587,6 +604,8 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -595,6 +614,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -611,7 +631,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -623,11 +642,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y # CONFIG_SATA_SIL24 is not set @@ -649,6 +671,7 @@ CONFIG_SATA_MV=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -676,6 +699,7 @@ CONFIG_SATA_MV=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -693,13 +717,16 @@ CONFIG_SATA_MV=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -768,6 +795,9 @@ CONFIG_NET_PCI=y # CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set @@ -789,6 +819,7 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set @@ -797,10 +828,7 @@ CONFIG_MV643XX_ETH=y # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set CONFIG_WLAN_80211=y CONFIG_LIBERTAS=y @@ -820,9 +848,7 @@ CONFIG_LIBERTAS_SDIO=y # CONFIG_MAC80211_HWSIM is not set # CONFIG_MWL8K is not set # CONFIG_P54_COMMON is not set -# CONFIG_ATH5K is not set -# CONFIG_ATH9K is not set -# CONFIG_AR9170_USB is not set +# CONFIG_ATH_COMMON is not set # CONFIG_IPW2100 is not set # CONFIG_IPW2200 is not set # CONFIG_IWLWIFI is not set @@ -832,6 +858,8 @@ CONFIG_LIBERTAS_SDIO=y # CONFIG_ZD1211RW is not set # CONFIG_RT2X00 is not set # CONFIG_HERMES is not set +# CONFIG_WL12XX is not set +# CONFIG_IWM is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -855,6 +883,7 @@ CONFIG_LIBERTAS_SDIO=y # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_ISDN is not set +# CONFIG_PHONE is not set # # Input device support @@ -878,13 +907,19 @@ CONFIG_INPUT_EVDEV=y # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set -CONFIG_KEYBOARD_GPIO=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set @@ -943,6 +978,7 @@ CONFIG_LEGACY_PTY_COUNT=16 CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_COMPAT is not set CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -998,10 +1034,6 @@ CONFIG_I2C_MV64XXX=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1023,11 +1055,47 @@ CONFIG_SPI_ORION=y # # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1041,33 +1109,28 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set +# CONFIG_MFD_TC6393XB is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -1087,7 +1150,6 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1106,10 +1168,12 @@ CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +CONFIG_HID_DRAGONRISE=y # CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y CONFIG_HID_KYE=y CONFIG_HID_GYRATION=y +CONFIG_HID_TWINHAN=y CONFIG_HID_KENSINGTON=y CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set @@ -1123,9 +1187,14 @@ CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y +CONFIG_HID_GREENASIA=y # CONFIG_GREENASIA_FF is not set +CONFIG_HID_SMARTJOYPLUS=y +# CONFIG_SMARTJOYPLUS_FF is not set CONFIG_HID_TOPSEED=y +CONFIG_HID_THRUSTMASTER=y # CONFIG_THRUSTMASTER_FF is not set +CONFIG_HID_ZEROPLUS=y # CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y @@ -1150,18 +1219,21 @@ CONFIG_USB_DEVICE_CLASS=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_WHCI_HCD is not set # CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set # # USB Device Class drivers @@ -1252,11 +1324,14 @@ CONFIG_SDIO_UART=y # MMC/SD/SDIO Host Controller Drivers # # CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set # CONFIG_MMC_TIFM_SD is not set CONFIG_MMC_MVSDIO=y # CONFIG_MMC_SPI is not set +# CONFIG_MMC_CB710 is not set +# CONFIG_MMC_VIA_SDMMC is not set # CONFIG_MEMSTICK is not set -# CONFIG_ACCESSIBILITY is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -1266,7 +1341,7 @@ CONFIG_LEDS_CLASS=y # CONFIG_LEDS_PCA9532 is not set CONFIG_LEDS_GPIO=y CONFIG_LEDS_GPIO_PLATFORM=y -# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_LP3944 is not set # CONFIG_LEDS_PCA955X is not set # CONFIG_LEDS_DAC124S085 is not set # CONFIG_LEDS_BD2802 is not set @@ -1278,11 +1353,14 @@ CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_GPIO is not set CONFIG_LEDS_TRIGGER_DEFAULT_ON=y # # iptables trigger is under Netfilter config (LED target) # +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1314,6 +1392,7 @@ CONFIG_RTC_INTF_DEV=y CONFIG_RTC_DRV_S35390A=y # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1325,6 +1404,7 @@ CONFIG_RTC_DRV_S35390A=y # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set # # Platform RTC drivers @@ -1360,8 +1440,11 @@ CONFIG_DMA_ENGINE=y # CONFIG_ASYNC_TX_DMA is not set # CONFIG_DMATEST is not set # CONFIG_AUXDISPLAY is not set -# CONFIG_REGULATOR is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1379,10 +1462,13 @@ CONFIG_JBD=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1455,7 +1541,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1530,6 +1615,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1547,6 +1633,7 @@ CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_PREEMPT is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1567,12 +1654,14 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set @@ -1581,25 +1670,12 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_RING_BUFFER_ALLOW_SWAP=y CONFIG_TRACING=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_PREEMPT_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_FTRACE is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y @@ -1623,7 +1699,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1665,11 +1740,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set @@ -1714,6 +1791,7 @@ CONFIG_CRYPTO_ARC4=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +CONFIG_CRYPTO_DEV_MV_CESA=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set CONFIG_BINARY_PRINTF=y -- cgit v0.10.2 From 3293576c6b7104cdac9c2d10d35abd86b02d7264 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Sat, 7 Nov 2009 20:59:20 -0500 Subject: [ARM] orion5x: update defconfig Signed-off-by: Nicolas Pitre diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig index 9e23852..5383cd0 100644 --- a/arch/arm/configs/orion5x_defconfig +++ b/arch/arm/configs/orion5x_defconfig @@ -1,15 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc4 -# Mon May 4 14:07:25 2009 +# Linux kernel version: 2.6.32-rc6 +# Sat Nov 7 20:52:21 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -18,13 +16,12 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -46,11 +43,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_GROUP_SCHED is not set @@ -69,7 +67,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -82,6 +79,10 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y # CONFIG_SLUB_DEBUG is not set @@ -91,13 +92,17 @@ CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y -# CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y CONFIG_KRETPROBES=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_RT_MUTEXES=y @@ -109,7 +114,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -130,19 +135,22 @@ CONFIG_DEFAULT_IOSCHED="cfq" # # System Type # +CONFIG_MMU=y # CONFIG_ARCH_AAEC2000 is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -151,25 +159,27 @@ CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set # CONFIG_ARCH_KIRKWOOD is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_LOKI is not set # CONFIG_ARCH_MV78XX0 is not set -# CONFIG_ARCH_MXC is not set CONFIG_ARCH_ORION5X=y +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_MSM is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM is not set -# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_BCMRING is not set # # Orion Implementations @@ -187,6 +197,9 @@ CONFIG_MACH_WRT350N_V2=y CONFIG_MACH_TS78XX=y CONFIG_MACH_MV2120=y CONFIG_MACH_EDMINI_V2=y +CONFIG_MACH_D2NET=y +CONFIG_MACH_BIGDISK=y +CONFIG_MACH_NET2BIG=y CONFIG_MACH_MSS2=y CONFIG_MACH_WNR854T=y CONFIG_MACH_RD88F5181L_GE=y @@ -202,7 +215,7 @@ CONFIG_CPU_FEROCEON=y CONFIG_CPU_FEROCEON_OLD_ID=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_PABRT_LEGACY=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_COPY_FEROCEON=y CONFIG_CPU_TLB_FEROCEON=y @@ -215,7 +228,7 @@ CONFIG_CPU_CP15_MMU=y CONFIG_ARM_THUMB=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_OUTER_CACHE is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 # # Bus support @@ -240,11 +253,12 @@ CONFIG_VMSPLIT_3G=y # CONFIG_VMSPLIT_2G is not set # CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y -CONFIG_ARCH_FLATMEM_HAS_HOLES=y # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set # CONFIG_HIGHMEM is not set @@ -259,12 +273,14 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_LEDS=y CONFIG_LEDS_CPU=y CONFIG_ALIGNMENT_TRAP=y +CONFIG_UACCESS_WITH_MEMCPY=y # # Boot options @@ -308,6 +324,7 @@ CONFIG_PM=y # CONFIG_PM_DEBUG is not set # CONFIG_SUSPEND is not set # CONFIG_APM_EMULATION is not set +# CONFIG_PM_RUNTIME is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y @@ -356,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -378,6 +396,7 @@ CONFIG_NET_DSA_MV88E6123_61_65=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -394,11 +413,15 @@ CONFIG_NET_PKTGEN=m # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 # CONFIG_WIRELESS_OLD_REGULATORY is not set CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -411,6 +434,7 @@ CONFIG_WIRELESS_EXT_SYSFS=y # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -422,9 +446,9 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set @@ -537,6 +561,7 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set @@ -552,7 +577,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -576,10 +603,6 @@ CONFIG_BLK_DEV_SR=m # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=m # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -596,6 +619,8 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -604,6 +629,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -620,7 +646,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -632,11 +657,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set @@ -658,6 +686,7 @@ CONFIG_SATA_MV=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -685,6 +714,7 @@ CONFIG_SATA_MV=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -703,13 +733,16 @@ CONFIG_SATA_MV=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -777,6 +810,8 @@ CONFIG_NET_PCI=y # CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set @@ -798,6 +833,7 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set @@ -806,10 +842,7 @@ CONFIG_MV643XX_ETH=y # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -835,6 +868,7 @@ CONFIG_MV643XX_ETH=y # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_ISDN is not set +# CONFIG_PHONE is not set # # Input device support @@ -855,13 +889,19 @@ CONFIG_INPUT_EVDEV=y # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set # CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set -CONFIG_KEYBOARD_GPIO=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set @@ -912,6 +952,7 @@ CONFIG_HW_RANDOM_TIMERIOMEM=m CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_COMPAT is not set CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -967,20 +1008,55 @@ CONFIG_I2C_MV64XXX=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set + +# +# SPI GPIO expanders: +# + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -1030,6 +1106,8 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1041,9 +1119,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1057,33 +1133,26 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set +# CONFIG_MFD_TC6393XB is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # +# CONFIG_VGA_ARB is not set # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -1097,7 +1166,6 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1116,10 +1184,11 @@ CONFIG_USB_HID=y # CONFIG_HID_CHERRY is not set # CONFIG_HID_CHICONY is not set # CONFIG_HID_CYPRESS is not set -# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_DRAGONRISE is not set # CONFIG_HID_EZKEY is not set # CONFIG_HID_KYE is not set # CONFIG_HID_GYRATION is not set +# CONFIG_HID_TWINHAN is not set # CONFIG_HID_KENSINGTON is not set # CONFIG_HID_LOGITECH is not set # CONFIG_HID_MICROSOFT is not set @@ -1130,10 +1199,11 @@ CONFIG_USB_HID=y # CONFIG_HID_SAMSUNG is not set # CONFIG_HID_SONY is not set # CONFIG_HID_SUNPLUS is not set -# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TOPSEED is not set -# CONFIG_THRUSTMASTER_FF is not set -# CONFIG_ZEROPLUS_FF is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1160,18 +1230,21 @@ CONFIG_USB_DEVICE_CLASS=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_WHCI_HCD is not set # CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set # # USB Device Class drivers @@ -1248,7 +1321,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set -# CONFIG_ACCESSIBILITY is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -1258,7 +1330,7 @@ CONFIG_LEDS_CLASS=y # CONFIG_LEDS_PCA9532 is not set CONFIG_LEDS_GPIO=y CONFIG_LEDS_GPIO_PLATFORM=y -# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_LP3944 is not set # CONFIG_LEDS_PCA955X is not set # CONFIG_LEDS_BD2802 is not set @@ -1269,11 +1341,14 @@ CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_GPIO is not set CONFIG_LEDS_TRIGGER_DEFAULT_ON=y # # iptables trigger is under Netfilter config (LED target) # +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1306,6 +1381,7 @@ CONFIG_RTC_DRV_M41T80=y CONFIG_RTC_DRV_S35390A=y # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1344,8 +1420,11 @@ CONFIG_DMA_ENGINE=y # CONFIG_ASYNC_TX_DMA is not set # CONFIG_DMATEST is not set # CONFIG_AUXDISPLAY is not set -# CONFIG_REGULATOR is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1358,10 +1437,10 @@ CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set CONFIG_EXT4_FS=m -# CONFIG_EXT4DEV_COMPAT is not set CONFIG_EXT4_FS_XATTR=y # CONFIG_EXT4_FS_POSIX_ACL is not set # CONFIG_EXT4_FS_SECURITY is not set +# CONFIG_EXT4_DEBUG is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_JBD2=m @@ -1370,10 +1449,13 @@ CONFIG_FS_MBCACHE=m # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1446,7 +1528,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1537,6 +1618,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1552,6 +1634,7 @@ CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_KMEMLEAK is not set CONFIG_DEBUG_PREEMPT=y # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1572,6 +1655,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set @@ -1579,6 +1663,7 @@ CONFIG_FRAME_POINTER=y # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set CONFIG_LATENCYTOP=y @@ -1587,25 +1672,12 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_RING_BUFFER_ALLOW_SWAP=y CONFIG_TRACING=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_PREEMPT_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_FTRACE is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y @@ -1629,20 +1701,19 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set -CONFIG_CRYPTO_ALGAPI=m -CONFIG_CRYPTO_ALGAPI2=m -CONFIG_CRYPTO_AEAD2=m +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_BLKCIPHER2=m -CONFIG_CRYPTO_HASH2=m -CONFIG_CRYPTO_RNG2=m -CONFIG_CRYPTO_PCOMP=m +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=m -CONFIG_CRYPTO_MANAGER2=m +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set -CONFIG_CRYPTO_WORKQUEUE=m +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1670,11 +1741,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set @@ -1691,7 +1764,7 @@ CONFIG_CRYPTO_PCBC=m # # Ciphers # -# CONFIG_CRYPTO_AES is not set +CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_BLOWFISH is not set @@ -1719,6 +1792,7 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +CONFIG_CRYPTO_DEV_MV_CESA=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set CONFIG_BINARY_PRINTF=y -- cgit v0.10.2 From f37325a956f0ee4356793da7d93c699a25b21d92 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Sat, 7 Nov 2009 22:13:39 +0000 Subject: ALSA: snd-aica: declare MODULE_FIRMWARE Signed-off-by: Ben Hutchings Signed-off-by: Takashi Iwai diff --git a/sound/sh/aica.c b/sound/sh/aica.c index 583a369..a0df401 100644 --- a/sound/sh/aica.c +++ b/sound/sh/aica.c @@ -49,6 +49,7 @@ MODULE_AUTHOR("Adrian McMenamin "); MODULE_DESCRIPTION("Dreamcast AICA sound (pcm) driver"); MODULE_LICENSE("GPL"); MODULE_SUPPORTED_DEVICE("{{Yamaha/SEGA, AICA}}"); +MODULE_FIRMWARE("aica_firmware.bin"); /* module parameters */ #define CARD_NAME "AICA" -- cgit v0.10.2 From 88b938e63e68fd35e603421f722be0f35dde1016 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Sun, 8 Nov 2009 00:26:56 -0800 Subject: sparc64: replace parentheses in pmul() `>>' has a higher precedence than `?' so src2 evaluated to either 16 or 0 dependent on the bits set in rs2. Signed-off-by: Roel Kluin Signed-off-by: David S. Miller diff --git a/arch/sparc/kernel/visemul.c b/arch/sparc/kernel/visemul.c index b956fd7..d231cbd 100644 --- a/arch/sparc/kernel/visemul.c +++ b/arch/sparc/kernel/visemul.c @@ -617,7 +617,7 @@ static void pmul(struct pt_regs *regs, unsigned int insn, unsigned int opf) rs2 = fps_regval(f, RS2(insn)); rd_val = 0; - src2 = (rs2 >> (opf == FMUL8x16AU_OPF) ? 16 : 0); + src2 = rs2 >> (opf == FMUL8x16AU_OPF ? 16 : 0); for (byte = 0; byte < 4; byte++) { u16 src1 = (rs1 >> (byte * 8)) & 0x00ff; u32 prod = src1 * src2; -- cgit v0.10.2 From 6755aebaaf9fc5416acfd4578ab7a1e122ecbc74 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 6 Nov 2009 00:23:01 +0000 Subject: can: should not use __dev_get_by_index() without locks bcm_proc_getifname() is called with RTNL and dev_base_lock not held. It calls __dev_get_by_index() without locks, and this is illegal (might crash) Close the race by holding dev_base_lock and copying dev->name in the protected section. Signed-off-by: Eric Dumazet Signed-off-by: Oliver Hartkopp Signed-off-by: David S. Miller diff --git a/net/can/bcm.c b/net/can/bcm.c index 597da4f..e8d58f3 100644 --- a/net/can/bcm.c +++ b/net/can/bcm.c @@ -132,23 +132,27 @@ static inline struct bcm_sock *bcm_sk(const struct sock *sk) /* * procfs functions */ -static char *bcm_proc_getifname(int ifindex) +static char *bcm_proc_getifname(char *result, int ifindex) { struct net_device *dev; if (!ifindex) return "any"; - /* no usage counting */ + read_lock(&dev_base_lock); dev = __dev_get_by_index(&init_net, ifindex); if (dev) - return dev->name; + strcpy(result, dev->name); + else + strcpy(result, "???"); + read_unlock(&dev_base_lock); - return "???"; + return result; } static int bcm_proc_show(struct seq_file *m, void *v) { + char ifname[IFNAMSIZ]; struct sock *sk = (struct sock *)m->private; struct bcm_sock *bo = bcm_sk(sk); struct bcm_op *op; @@ -157,7 +161,7 @@ static int bcm_proc_show(struct seq_file *m, void *v) seq_printf(m, " / sk %p", sk); seq_printf(m, " / bo %p", bo); seq_printf(m, " / dropped %lu", bo->dropped_usr_msgs); - seq_printf(m, " / bound %s", bcm_proc_getifname(bo->ifindex)); + seq_printf(m, " / bound %s", bcm_proc_getifname(ifname, bo->ifindex)); seq_printf(m, " <<<\n"); list_for_each_entry(op, &bo->rx_ops, list) { @@ -169,7 +173,7 @@ static int bcm_proc_show(struct seq_file *m, void *v) continue; seq_printf(m, "rx_op: %03X %-5s ", - op->can_id, bcm_proc_getifname(op->ifindex)); + op->can_id, bcm_proc_getifname(ifname, op->ifindex)); seq_printf(m, "[%d]%c ", op->nframes, (op->flags & RX_CHECK_DLC)?'d':' '); if (op->kt_ival1.tv64) @@ -194,7 +198,8 @@ static int bcm_proc_show(struct seq_file *m, void *v) list_for_each_entry(op, &bo->tx_ops, list) { seq_printf(m, "tx_op: %03X %s [%d] ", - op->can_id, bcm_proc_getifname(op->ifindex), + op->can_id, + bcm_proc_getifname(ifname, op->ifindex), op->nframes); if (op->kt_ival1.tv64) -- cgit v0.10.2 From 53a0ef866dc379e577794819d0b8ade5ba338e3a Mon Sep 17 00:00:00 2001 From: Wolfgang Grandegger Date: Fri, 6 Nov 2009 23:53:13 +0000 Subject: can: fix WARN_ON dump in net/core/rtnetlink.c:rtmsg_ifinfo() On older kernels, e.g. 2.6.27, a WARN_ON dump in rtmsg_ifinfo() is thrown when the CAN device is registered due to insufficient skb space, as reported by various users. This patch adds the rtnl_link_ops "get_size" to fix the problem. I think this patch is required for more recent kernels as well, even if no WARN_ON dumps are triggered. Maybe we also need "get_xstats_size" for the CAN xstats. Signed-off-by: Wolfgang Grandegger Signed-off-by: David S. Miller diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c index f0b9a1e..564e31c 100644 --- a/drivers/net/can/dev.c +++ b/drivers/net/can/dev.c @@ -589,6 +589,22 @@ static int can_changelink(struct net_device *dev, return 0; } +static size_t can_get_size(const struct net_device *dev) +{ + struct can_priv *priv = netdev_priv(dev); + size_t size; + + size = nla_total_size(sizeof(u32)); /* IFLA_CAN_STATE */ + size += sizeof(struct can_ctrlmode); /* IFLA_CAN_CTRLMODE */ + size += nla_total_size(sizeof(u32)); /* IFLA_CAN_RESTART_MS */ + size += sizeof(struct can_bittiming); /* IFLA_CAN_BITTIMING */ + size += sizeof(struct can_clock); /* IFLA_CAN_CLOCK */ + if (priv->bittiming_const) /* IFLA_CAN_BITTIMING_CONST */ + size += sizeof(struct can_bittiming_const); + + return size; +} + static int can_fill_info(struct sk_buff *skb, const struct net_device *dev) { struct can_priv *priv = netdev_priv(dev); @@ -639,6 +655,7 @@ static struct rtnl_link_ops can_link_ops __read_mostly = { .setup = can_setup, .newlink = can_newlink, .changelink = can_changelink, + .get_size = can_get_size, .fill_info = can_fill_info, .fill_xstats = can_fill_xstats, }; -- cgit v0.10.2 From 2606289779cb297320a185db5997729d29b6700b Mon Sep 17 00:00:00 2001 From: Sebastian Siewior Date: Fri, 6 Nov 2009 08:50:28 +0000 Subject: net/fsl_pq_mdio: add module license GPL or it will taint the kernel and fail to load becuase of_address_to_resource() is GPL only. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: David S. Miller diff --git a/drivers/net/fsl_pq_mdio.c b/drivers/net/fsl_pq_mdio.c index 6ac4648..efbf676 100644 --- a/drivers/net/fsl_pq_mdio.c +++ b/drivers/net/fsl_pq_mdio.c @@ -427,3 +427,4 @@ void fsl_pq_mdio_exit(void) of_unregister_platform_driver(&fsl_pq_mdio_driver); } module_exit(fsl_pq_mdio_exit); +MODULE_LICENSE("GPL"); -- cgit v0.10.2 From 5399dd1fc8f5e812db931225ef5f67d89f3b1a56 Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Sat, 7 Nov 2009 18:45:16 +0900 Subject: nilfs2: fix kernel oops in error case of nilfs_ioctl_move_blocks This fixes a kernel oops reported by Markus Trippelsdorf in the email titled "[NILFS users] kernel Oops while running nilfs_cleanerd". The oops was caused by a bug of error path in nilfs_ioctl_move_blocks() function, which was inlined in nilfs_ioctl_clean_segments(). nilfs_ioctl_move_blocks checks duplication of blocks which will be moved in garbage collection. But, the check should have be done within nilfs_ioctl_move_inode_block() to prevent list corruption among buffers storing the target blocks. To fix the kernel oops, this moves forward the duplication check before the list insertion. I also tested this for stable trees [2.6.30, 2.6.31]. Reported-by: Markus Trippelsdorf Signed-off-by: Ryusuke Konishi Cc: stable diff --git a/fs/nilfs2/ioctl.c b/fs/nilfs2/ioctl.c index 6572ea4..89dd73e 100644 --- a/fs/nilfs2/ioctl.c +++ b/fs/nilfs2/ioctl.c @@ -297,7 +297,18 @@ static int nilfs_ioctl_move_inode_block(struct inode *inode, (unsigned long long)vdesc->vd_vblocknr); return ret; } - bh->b_private = vdesc; + if (unlikely(!list_empty(&bh->b_assoc_buffers))) { + printk(KERN_CRIT "%s: conflicting %s buffer: ino=%llu, " + "cno=%llu, offset=%llu, blocknr=%llu, vblocknr=%llu\n", + __func__, vdesc->vd_flags ? "node" : "data", + (unsigned long long)vdesc->vd_ino, + (unsigned long long)vdesc->vd_cno, + (unsigned long long)vdesc->vd_offset, + (unsigned long long)vdesc->vd_blocknr, + (unsigned long long)vdesc->vd_vblocknr); + brelse(bh); + return -EEXIST; + } list_add_tail(&bh->b_assoc_buffers, buffers); return 0; } @@ -335,24 +346,10 @@ static int nilfs_ioctl_move_blocks(struct the_nilfs *nilfs, list_for_each_entry_safe(bh, n, &buffers, b_assoc_buffers) { ret = nilfs_gccache_wait_and_mark_dirty(bh); if (unlikely(ret < 0)) { - if (ret == -EEXIST) { - vdesc = bh->b_private; - printk(KERN_CRIT - "%s: conflicting %s buffer: " - "ino=%llu, cno=%llu, offset=%llu, " - "blocknr=%llu, vblocknr=%llu\n", - __func__, - vdesc->vd_flags ? "node" : "data", - (unsigned long long)vdesc->vd_ino, - (unsigned long long)vdesc->vd_cno, - (unsigned long long)vdesc->vd_offset, - (unsigned long long)vdesc->vd_blocknr, - (unsigned long long)vdesc->vd_vblocknr); - } + WARN_ON(ret == -EEXIST); goto failed; } list_del_init(&bh->b_assoc_buffers); - bh->b_private = NULL; brelse(bh); } return nmembs; @@ -360,7 +357,6 @@ static int nilfs_ioctl_move_blocks(struct the_nilfs *nilfs, failed: list_for_each_entry_safe(bh, n, &buffers, b_assoc_buffers) { list_del_init(&bh->b_assoc_buffers); - bh->b_private = NULL; brelse(bh); } return ret; -- cgit v0.10.2 From c083234f1592ef3fad3d8083663c5e4a357ec77c Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Sun, 8 Nov 2009 12:09:24 +0900 Subject: nilfs2: fix missing cleanup of gc cache on error cases This fixes an -rc1 regression brought by the commit: 1cf58fa840472ec7df6bf2312885949ebb308853 ("nilfs2: shorten freeze period due to GC in write operation v3"). Although the patch moved out a function call of nilfs_ioctl_move_blocks() to nilfs_ioctl_clean_segments() from nilfs_ioctl_prepare_clean_segments(), it didn't move corresponding cleanup job needed for the error case. This will move the missing cleanup job to the destination function. Signed-off-by: Ryusuke Konishi Acked-by: Jiro SEKIBA diff --git a/fs/nilfs2/ioctl.c b/fs/nilfs2/ioctl.c index 89dd73e..d24057d 100644 --- a/fs/nilfs2/ioctl.c +++ b/fs/nilfs2/ioctl.c @@ -467,7 +467,6 @@ int nilfs_ioctl_prepare_clean_segments(struct the_nilfs *nilfs, return 0; failed: - nilfs_remove_all_gcinode(nilfs); printk(KERN_ERR "NILFS: GC failed during preparation: %s: err=%d\n", msg, ret); return ret; @@ -556,6 +555,8 @@ static int nilfs_ioctl_clean_segments(struct inode *inode, struct file *filp, else ret = nilfs_clean_segments(inode->i_sb, argv, kbufs); + if (ret < 0) + nilfs_remove_all_gcinode(nilfs); clear_nilfs_gc_running(nilfs); out_free: -- cgit v0.10.2 From 968c86458a5975efa7a95f832a4ec9fb21471137 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 6 Nov 2009 15:31:08 -0800 Subject: sched: Fix kernel-doc function parameter name Fix variable name in sched.c kernel-doc notation. Fixes this DocBook warning: Warning(kernel/sched.c:2008): No description found for parameter 'p' Warning(kernel/sched.c:2008): Excess function parameter 'k' description in 'kthread_bind' Signed-off-by: Randy Dunlap LKML-Reference: <4AF4B1BC.8020604@oracle.com> Signed-off-by: Ingo Molnar diff --git a/kernel/sched.c b/kernel/sched.c index 28dd4f4..7d7d5fc 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -1994,7 +1994,7 @@ static inline void check_class_changed(struct rq *rq, struct task_struct *p, /** * kthread_bind - bind a just-created kthread to a cpu. - * @k: thread created by kthread_create(). + * @p: thread created by kthread_create(). * @cpu: cpu (might not be online, must be possible) for @k to run on. * * Description: This function is equivalent to set_cpus_allowed(), -- cgit v0.10.2 From de2a47cf2b3f59ef9664b277f4021b91af13598e Mon Sep 17 00:00:00 2001 From: Xiaotian Feng Date: Thu, 5 Nov 2009 10:43:51 +0800 Subject: x86: Fix error return sequence in __ioremap_caller() kernel missed to free memtype if get_vm_area_caller failed in __ioremap_caller. This patch introduces error path to fix this and cleans up the repetitive error return sequences that contributed to the creation of the bug. Signed-off-by: Xiaotian Feng Acked-by: Suresh Siddha Cc: Venkatesh Pallipadi Cc: H. Peter Anvin LKML-Reference: <1257389031-20429-1-git-send-email-dfeng@redhat.com> Signed-off-by: Ingo Molnar diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c index 334e63c..2feb9bd 100644 --- a/arch/x86/mm/ioremap.c +++ b/arch/x86/mm/ioremap.c @@ -170,8 +170,7 @@ static void __iomem *__ioremap_caller(resource_size_t phys_addr, (unsigned long long)phys_addr, (unsigned long long)(phys_addr + size), prot_val, new_prot_val); - free_memtype(phys_addr, phys_addr + size); - return NULL; + goto err_free_memtype; } prot_val = new_prot_val; } @@ -197,26 +196,25 @@ static void __iomem *__ioremap_caller(resource_size_t phys_addr, */ area = get_vm_area_caller(size, VM_IOREMAP, caller); if (!area) - return NULL; + goto err_free_memtype; area->phys_addr = phys_addr; vaddr = (unsigned long) area->addr; - if (kernel_map_sync_memtype(phys_addr, size, prot_val)) { - free_memtype(phys_addr, phys_addr + size); - free_vm_area(area); - return NULL; - } + if (kernel_map_sync_memtype(phys_addr, size, prot_val)) + goto err_free_area; - if (ioremap_page_range(vaddr, vaddr + size, phys_addr, prot)) { - free_memtype(phys_addr, phys_addr + size); - free_vm_area(area); - return NULL; - } + if (ioremap_page_range(vaddr, vaddr + size, phys_addr, prot)) + goto err_free_area; ret_addr = (void __iomem *) (vaddr + offset); mmiotrace_ioremap(unaligned_phys_addr, unaligned_size, ret_addr); return ret_addr; +err_free_area: + free_vm_area(area); +err_free_memtype: + free_memtype(phys_addr, phys_addr + size); + return NULL; } /** -- cgit v0.10.2 From 158bc5af3d49be49c33dc06ff90c4f754c7d4f1b Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Sat, 7 Nov 2009 07:35:06 +0100 Subject: ARM: 5784/1: fix early boot machine ID mismatch error display That code was refactored a long time ago, but one particular label didn't get adjusted properly which broke the listing of supported machines. Signed-off-by: Nicolas Pitre Signed-off-by: Russell King diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S index 885a721..b9505aa 100644 --- a/arch/arm/kernel/head-common.S +++ b/arch/arm/kernel/head-common.S @@ -97,7 +97,7 @@ __error_a: bl printhex8 adr r0, str_a2 bl printascii - adr r3, 3f + adr r3, 4f ldmia r3, {r4, r5, r6} @ get machine desc list sub r4, r3, r4 @ get offset between virt&phys add r5, r5, r4 @ convert virt addresses to -- cgit v0.10.2 From e9036b36eed4d3cdb33fa9cbcdd9888ae516889f Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Mon, 26 Oct 2009 22:24:14 +0300 Subject: sched: Use root_task_group_empty only with FAIR_GROUP_SCHED root_task_group_empty is used only with FAIR_GROUP_SCHED so if we use other scheduler options we get: kernel/sched.c:314: warning: 'root_task_group_empty' defined but not used So move CONFIG_FAIR_GROUP_SCHED up that it covers root_task_group_empty(). Signed-off-by: Cyrill Gorcunov Cc: Peter Zijlstra LKML-Reference: <20091026192414.GB5321@lenovo> Signed-off-by: Ingo Molnar diff --git a/kernel/sched.c b/kernel/sched.c index 7d7d5fc..3c11ae0 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -309,6 +309,8 @@ static DEFINE_PER_CPU_SHARED_ALIGNED(struct rt_rq, init_rt_rq); */ static DEFINE_SPINLOCK(task_group_lock); +#ifdef CONFIG_FAIR_GROUP_SCHED + #ifdef CONFIG_SMP static int root_task_group_empty(void) { @@ -316,7 +318,6 @@ static int root_task_group_empty(void) } #endif -#ifdef CONFIG_FAIR_GROUP_SCHED #ifdef CONFIG_USER_SCHED # define INIT_TASK_GROUP_LOAD (2*NICE_0_LOAD) #else /* !CONFIG_USER_SCHED */ -- cgit v0.10.2 From eb647138acefc897c0eb6eddd5d3650966dfe627 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Sun, 8 Nov 2009 12:12:14 +0100 Subject: x86/PCI: Adjust GFP mask handling for coherent allocations Rather than forcing GFP flags and DMA mask to be inconsistent, GFP flags should be determined even for the fallback device through dma_alloc_coherent_mask()/dma_alloc_coherent_gfp_flags(). This restores 64-bit behavior as it was prior to commits 8965eb19386fdf5ccd0ef8b02593eb8560aa3416 and 4a367f3a9dbf2e7ffcee4702203479809236ee6e (not sure why there are two of them), where GFP_DMA was forced on for 32-bit, but not for 64-bit, with the slight adjustment that afaict even 32-bit doesn't need this without CONFIG_ISA. Signed-off-by: Jan Beulich Acked-by: Takashi Iwai LKML-Reference: <4AF18187020000780001D8AA@vpn.id2.novell.com> Signed-off-by: Ingo Molnar Signed-off-by: Jesse Barnes diff --git a/arch/x86/include/asm/dma-mapping.h b/arch/x86/include/asm/dma-mapping.h index 0ee770d..6a25d5d 100644 --- a/arch/x86/include/asm/dma-mapping.h +++ b/arch/x86/include/asm/dma-mapping.h @@ -14,6 +14,12 @@ #include #include +#ifdef CONFIG_ISA +# define ISA_DMA_BIT_MASK DMA_BIT_MASK(24) +#else +# define ISA_DMA_BIT_MASK DMA_BIT_MASK(32) +#endif + extern dma_addr_t bad_dma_address; extern int iommu_merge; extern struct device x86_dma_fallback_dev; @@ -124,10 +130,8 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, if (dma_alloc_from_coherent(dev, size, dma_handle, &memory)) return memory; - if (!dev) { + if (!dev) dev = &x86_dma_fallback_dev; - gfp |= GFP_DMA; - } if (!is_device_dma_capable(dev)) return NULL; diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index b2a71dc..a6e804d 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -45,12 +45,10 @@ int iommu_pass_through __read_mostly; dma_addr_t bad_dma_address __read_mostly = 0; EXPORT_SYMBOL(bad_dma_address); -/* Dummy device used for NULL arguments (normally ISA). Better would - be probably a smaller DMA mask, but this is bug-to-bug compatible - to older i386. */ +/* Dummy device used for NULL arguments (normally ISA). */ struct device x86_dma_fallback_dev = { .init_name = "fallback device", - .coherent_dma_mask = DMA_BIT_MASK(32), + .coherent_dma_mask = ISA_DMA_BIT_MASK, .dma_mask = &x86_dma_fallback_dev.coherent_dma_mask, }; EXPORT_SYMBOL(x86_dma_fallback_dev); -- cgit v0.10.2 From c10edee2e1716f8cf217cf52ed01ae4742fcdf3c Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Sun, 8 Nov 2009 18:01:06 +0200 Subject: perf tools: Fix permission checks The perf_event_open() system call returns EACCES if the user is not root which results in a very confusing error message: $ perf record -A -a -f Error: perfcounter syscall returned with -1 (Permission denied) Fatal: No CONFIG_PERF_EVENTS=y kernel support configured? It turns out that's because perf tools are checking only for EPERM. Fix that up to get a much better error message: $ perf record -A -a -f Fatal: Permission error - are you root? Signed-off-by: Pekka Enberg Cc: Peter Zijlstra Cc: Paul Mackerras Cc: Frederic Weisbecker LKML-Reference: <1257696066-4046-1-git-send-email-penberg@cs.helsinki.fi> Signed-off-by: Ingo Molnar diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c index 3eeef33..a4be453 100644 --- a/tools/perf/builtin-record.c +++ b/tools/perf/builtin-record.c @@ -426,7 +426,7 @@ try_again: if (fd[nr_cpu][counter] < 0) { int err = errno; - if (err == EPERM) + if (err == EPERM || err == EACCES) die("Permission error - are you root?\n"); else if (err == ENODEV && profile_cpu != -1) die("No such device - did you specify an out-of-range profile CPU?\n"); diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c index a1b1d10..e23bc74 100644 --- a/tools/perf/builtin-top.c +++ b/tools/perf/builtin-top.c @@ -1027,7 +1027,7 @@ try_again: if (fd[i][counter] < 0) { int err = errno; - if (err == EPERM) + if (err == EPERM || err == EACCES) die("No permission - are you root?\n"); /* * If it's cycles then fall back to hrtimer -- cgit v0.10.2 From bfd2e29f04e5f048ea62677811d1244badd6661e Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 8 Nov 2009 20:05:28 +0000 Subject: [ARM] Fix test for unimplemented ARM syscalls The existing test always failed since 'no' was always greater than 0x7ff. Signed-off-by: Russell King diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 95718a6..1bbda04 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -573,7 +573,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs) if not implemented, rather than raising SIGILL. This way the calling program can gracefully determine whether a feature is supported. */ - if (no <= 0x7ff) + if ((no & 0xffff) <= 0x7ff) return -ENOSYS; break; } -- cgit v0.10.2 From 1e424a348303694fabdf8b1efbfcb1a892dfa63a Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sun, 8 Nov 2009 15:45:44 -0500 Subject: ext4: partial revert to fix double brelse WARNING() This is a partial revert of commit 6487a9d (only the changes made to fs/ext4/namei.c), since it is causing the following brelse() double-free warning when running fsstress on a file system with 1k blocksize and we run into a block allocation failure while converting a single-block directory to a multi-block hash-tree indexed directory. WARNING: at fs/buffer.c:1197 __brelse+0x2e/0x33() Hardware name: VFS: brelse: Trying to free free buffer Modules linked in: Pid: 2226, comm: jbd2/sdd-8 Not tainted 2.6.32-rc6-00577-g0003f55 #101 Call Trace: [] warn_slowpath_common+0x65/0x95 [] warn_slowpath_fmt+0x29/0x2c [] __brelse+0x2e/0x33 [] jbd2_journal_refile_buffer+0x67/0x6c [] jbd2_journal_commit_transaction+0x319/0x14d8 [] ? try_to_del_timer_sync+0x58/0x60 [] ? sched_clock_cpu+0x12a/0x13e [] ? trace_hardirqs_off+0xb/0xd [] ? cpu_clock+0x3f/0x5b [] ? lock_release_holdtime+0x36/0x137 [] ? _spin_unlock_irqrestore+0x44/0x51 [] ? trace_hardirqs_on_caller+0x103/0x124 [] ? trace_hardirqs_on+0xb/0xd [] ? try_to_del_timer_sync+0x58/0x60 [] kjournald2+0x11a/0x310 [] ? autoremove_wake_function+0x0/0x38 [] ? kjournald2+0x0/0x310 [] kthread+0x66/0x6b [] ? kthread+0x0/0x6b [] kernel_thread_helper+0x7/0x10 ---[ end trace 5579351b86af61e3 ]--- Commit 6487a9d was an attempt some buffer head leaks in an ENOSPC error path, but in some cases it actually results in an excess ENOSPC, as shown above. Fixing this means cleaning up who is responsible for releasing the buffer heads from the callee to the caller of add_dirent_to_buf(). Since that's a relatively complex change, and we're late in the rcX development cycle, I'm reverting this now, and holding back a more complete fix until after 2.6.32 ships. We've lived with this buffer_head leak on ENOSPC in ext3 and ext4 for a very long time; a few more months won't kill us. Signed-off-by: "Theodore Ts'o" Cc: Curt Wohlgemuth diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c index 7c8fe80..6d2c1b8 100644 --- a/fs/ext4/namei.c +++ b/fs/ext4/namei.c @@ -1518,12 +1518,8 @@ static int ext4_add_entry(handle_t *handle, struct dentry *dentry, return retval; if (blocks == 1 && !dx_fallback && - EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_DIR_INDEX)) { - retval = make_indexed_dir(handle, dentry, inode, bh); - if (retval == -ENOSPC) - brelse(bh); - return retval; - } + EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_DIR_INDEX)) + return make_indexed_dir(handle, dentry, inode, bh); brelse(bh); } bh = ext4_append(handle, dir, &block, &retval); @@ -1532,10 +1528,7 @@ static int ext4_add_entry(handle_t *handle, struct dentry *dentry, de = (struct ext4_dir_entry_2 *) bh->b_data; de->inode = 0; de->rec_len = ext4_rec_len_to_disk(blocksize, blocksize); - retval = add_dirent_to_buf(handle, dentry, inode, de, bh); - if (retval == -ENOSPC) - brelse(bh); - return retval; + return add_dirent_to_buf(handle, dentry, inode, de, bh); } /* @@ -1664,8 +1657,7 @@ static int ext4_dx_add_entry(handle_t *handle, struct dentry *dentry, if (!de) goto cleanup; err = add_dirent_to_buf(handle, dentry, inode, de, bh); - if (err != -ENOSPC) - bh = NULL; + bh = NULL; goto cleanup; journal_error: -- cgit v0.10.2 From a556bec9955c8e47b40a87dbfeef6f24d3b2228f Mon Sep 17 00:00:00 2001 From: Hirokazu Takata Date: Mon, 9 Nov 2009 08:51:35 +0900 Subject: m32r: fix arch/m32r/boot/compressed/Makefile - Fix a comment string - Fix a typo of $(suffix-y) Signed-off-by: Hirokazu Takata diff --git a/arch/m32r/boot/compressed/Makefile b/arch/m32r/boot/compressed/Makefile index 1003880..177716b 100644 --- a/arch/m32r/boot/compressed/Makefile +++ b/arch/m32r/boot/compressed/Makefile @@ -1,5 +1,5 @@ # -# linux/arch/sh/boot/compressed/Makefile +# linux/arch/m32r/boot/compressed/Makefile # # create a compressed vmlinux image from the original vmlinux # @@ -47,5 +47,5 @@ suffix_$(CONFIG_KERNEL_GZIP) = gz suffix_$(CONFIG_KERNEL_BZIP2) = bz2 suffix_$(CONFIG_KERNEL_LZMA) = lzma -$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix_y) FORCE +$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix-y) FORCE $(call if_changed,ld) -- cgit v0.10.2 From 1c9d80ddc60f8ac26344ec3db9830e5f8016c16d Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 8 Nov 2009 17:41:20 -0800 Subject: sparc: Move of_set_property_mutex acquisition outside of devtree_lock grab. Otherwise we try to sleep with preemption disabled, etc. Noticed by Thomas Gleixner. Signed-off-by: David S. Miller diff --git a/arch/sparc/kernel/prom_common.c b/arch/sparc/kernel/prom_common.c index 138910c..d80a65d 100644 --- a/arch/sparc/kernel/prom_common.c +++ b/arch/sparc/kernel/prom_common.c @@ -79,6 +79,7 @@ int of_set_property(struct device_node *dp, const char *name, void *val, int len err = -ENODEV; + mutex_lock(&of_set_property_mutex); write_lock(&devtree_lock); prevp = &dp->properties; while (*prevp) { @@ -88,9 +89,7 @@ int of_set_property(struct device_node *dp, const char *name, void *val, int len void *old_val = prop->value; int ret; - mutex_lock(&of_set_property_mutex); ret = prom_setprop(dp->node, name, val, len); - mutex_unlock(&of_set_property_mutex); err = -EINVAL; if (ret >= 0) { @@ -109,6 +108,7 @@ int of_set_property(struct device_node *dp, const char *name, void *val, int len prevp = &(*prevp)->next; } write_unlock(&devtree_lock); + mutex_unlock(&of_set_property_mutex); /* XXX Upate procfs if necessary... */ -- cgit v0.10.2 From a9d244a2ff163247b607c4bb64803230ca8f8acb Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Thu, 5 Nov 2009 23:14:39 +0000 Subject: sh: Account for cache aliases in flush_icache_range() The icache may also contain aliases so we must account for them just like we do when manipulating the dcache. We usually get away with aliases in the icache because the instructions that are read from memory are read-only, i.e. they never change. However, the place where this bites us is when the code has been modified. Signed-off-by: Matt Fleming Signed-off-by: Paul Mundt diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c index 519e2d1..b7f235c 100644 --- a/arch/sh/mm/cache-sh4.c +++ b/arch/sh/mm/cache-sh4.c @@ -72,6 +72,7 @@ static void __uses_jump_to_uncached sh4_flush_icache_range(void *args) for (v = start; v < end; v += L1_CACHE_BYTES) { unsigned long icacheaddr; + int j, n; __ocbwb(v); @@ -79,8 +80,10 @@ static void __uses_jump_to_uncached sh4_flush_icache_range(void *args) cpu_data->icache.entry_mask); /* Clear i-cache line valid-bit */ + n = boot_cpu_data.icache.n_aliases; for (i = 0; i < cpu_data->icache.ways; i++) { - __raw_writel(0, icacheaddr); + for (j = 0; j < n; j++) + __raw_writel(0, icacheaddr + (j * PAGE_SIZE)); icacheaddr += cpu_data->icache.way_incr; } } -- cgit v0.10.2 From 969e46a8533a3e40ce2146f6764a963b1f5505da Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 6 Nov 2009 22:42:05 +0000 Subject: sh: Replace old style lock initializer SPIN_LOCK_UNLOCKED is deprecated. Use __SPIN_LOCK_UNLOCKED instead. Signed-off-by: Thomas Gleixner Cc: linux-sh@vger.kernel.org Signed-off-by: Paul Mundt diff --git a/arch/sh/include/asm/rwsem.h b/arch/sh/include/asm/rwsem.h index 1987f3e..06e2251 100644 --- a/arch/sh/include/asm/rwsem.h +++ b/arch/sh/include/asm/rwsem.h @@ -41,7 +41,7 @@ struct rw_semaphore { #endif #define __RWSEM_INITIALIZER(name) \ - { RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, \ + { RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED((name).wait_lock), \ LIST_HEAD_INIT((name).wait_list) \ __RWSEM_DEP_MAP_INIT(name) } -- cgit v0.10.2 From d178f27fc5150d680d9df865ea9dfe3269cf00a6 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Mon, 9 Nov 2009 15:58:23 +0000 Subject: ksm: cond_resched in unstable tree KSM needs a cond_resched() for CONFIG_PREEMPT_NONE, in its unbounded search of the unstable tree. The stable tree cases already have one, and originally there was one down inside get_user_pages(); but I missed it when I converted to follow_page() instead. Signed-off-by: Hugh Dickins Acked-by: Izik Eidus Signed-off-by: Linus Torvalds diff --git a/mm/ksm.c b/mm/ksm.c index bef1af4..5575f86 100644 --- a/mm/ksm.c +++ b/mm/ksm.c @@ -1012,6 +1012,7 @@ static struct rmap_item *unstable_tree_search_insert(struct page *page, struct rmap_item *tree_rmap_item; int ret; + cond_resched(); tree_rmap_item = rb_entry(*new, struct rmap_item, node); page2[0] = get_mergeable_page(tree_rmap_item); if (!page2[0]) -- cgit v0.10.2 From 95491d902b4ed1bfd8f602aada793d74cc85428b Mon Sep 17 00:00:00 2001 From: Daniel T Chen Date: Sun, 8 Nov 2009 19:03:55 -0500 Subject: ALSA: hda: Use model=auto quirk for Sony VAIO VGN-FW170J using ALC262 BugLink: https://bugs.launchpad.net/bugs/478309 The internal microphone on this VAIO model does not work unless the "auto" quirk is used. Signed-off-by: Daniel T Chen Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index ff20048..9bb4f75 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -11460,6 +11460,7 @@ static struct snd_pci_quirk alc262_cfg_tbl[] = { SND_PCI_QUIRK(0x104d, 0x820f, "Sony ASSAMD", ALC262_SONY_ASSAMD), SND_PCI_QUIRK(0x104d, 0x9016, "Sony VAIO", ALC262_AUTO), /* dig-only */ SND_PCI_QUIRK(0x104d, 0x9025, "Sony VAIO Z21MN", ALC262_TOSHIBA_S06), + SND_PCI_QUIRK(0x104d, 0x9035, "Sony VAIO VGN-FW170J", ALC262_AUTO), SND_PCI_QUIRK_MASK(0x104d, 0xff00, 0x9000, "Sony VAIO", ALC262_SONY_ASSAMD), SND_PCI_QUIRK(0x1179, 0x0001, "Toshiba dynabook SS RX1", -- cgit v0.10.2 From 52cb0148ef2401dbffa4daf60588cad27e4f329d Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Mon, 9 Nov 2009 23:21:19 +0000 Subject: mtd/maps: Fix accidental removal in Makefile The commit d79c326 ("gpio-addr-flash: new driver for GPIO assisted flash addressing") removed two lines from the Makefile by accident. Though I'm not sure how this accident happened, this patch reverts the removal. Signed-off-by: Atsushi Nemoto Signed-off-by: David Woodhouse Signed-off-by: Linus Torvalds diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile index 1d5cf86..ae2f6db 100644 --- a/drivers/mtd/maps/Makefile +++ b/drivers/mtd/maps/Makefile @@ -58,4 +58,6 @@ obj-$(CONFIG_MTD_PLATRAM) += plat-ram.o obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o obj-$(CONFIG_MTD_INTEL_VR_NOR) += intel_vr_nor.o obj-$(CONFIG_MTD_BFIN_ASYNC) += bfin-async-flash.o +obj-$(CONFIG_MTD_RBTX4939) += rbtx4939-flash.o +obj-$(CONFIG_MTD_VMU) += vmu-flash.o obj-$(CONFIG_MTD_GPIO_ADDR) += gpio-addr-flash.o -- cgit v0.10.2 From a3323b72b964471650a6128de4e10f8e88d47ae1 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 3 Nov 2009 14:42:04 +0000 Subject: ARM: SMDK6410: Configure GPIO pull up for WM835x IRQ line When used with the WM1190-EV1 board we can use the internal pull up resistor of the CPU to provide the required pull for the IRQ line. Without this interrupts from the WM835x don't work in the default WM1190-EV1 hardwaer configuration. Signed-off-by: Mark Brown Signed-off-by: Ben Dooks diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c index ea51dbe..9f1a214 100644 --- a/arch/arm/mach-s3c6410/mach-smdk6410.c +++ b/arch/arm/mach-s3c6410/mach-smdk6410.c @@ -320,6 +320,9 @@ static int __init smdk6410_wm8350_init(struct wm8350 *wm8350) { int i; + /* Configure the IRQ line */ + s3c_gpio_setpull(S3C64XX_GPN(12), S3C_GPIO_PULL_UP); + /* Instantiate the regulators */ for (i = 0; i < ARRAY_SIZE(wm1190_regulators); i++) wm8350_register_regulator(wm8350, -- cgit v0.10.2 From c7a19787195fcc90aabc3a71f29647ba9a443efe Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 3 Nov 2009 14:42:10 +0000 Subject: ARM: SMDK6410: Allocate more GPIO space for WM1190-EV1 The WM835x has some GPIOs on it, allocate some space so we can use them with gpiolib. Signed-off-by: Mark Brown Signed-off-by: Ben Dooks diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig index 53fc3ff..72d4b11 100644 --- a/arch/arm/mach-s3c6410/Kconfig +++ b/arch/arm/mach-s3c6410/Kconfig @@ -77,6 +77,7 @@ config SMDK6410_WM1190_EV1 depends on MACH_SMDK6410 select REGULATOR select REGULATOR_WM8350 + select S3C24XX_GPIO_EXTRA64 select MFD_WM8350_I2C select MFD_WM8350_CONFIG_MODE_0 select MFD_WM8350_CONFIG_MODE_3 -- cgit v0.10.2 From 54489cd46a3a268ed981c681726c6d690883f076 Mon Sep 17 00:00:00 2001 From: Maurus Cuelenaere Date: Wed, 4 Nov 2009 13:13:29 +0100 Subject: ARM: S3C64XX: Remove duplicate s3c_dma_has_circular() definition for S3C64xx. This patch removes the duplicated s3c_dma_has_circular() definition and so fixes compilation for S3C64xx. Signed-off-by: Maurus Cuelenaere Signed-off-by: Ben Dooks diff --git a/arch/arm/mach-s3c6400/include/mach/dma.h b/arch/arm/mach-s3c6400/include/mach/dma.h index 004edab..1067619 100644 --- a/arch/arm/mach-s3c6400/include/mach/dma.h +++ b/arch/arm/mach-s3c6400/include/mach/dma.h @@ -68,11 +68,6 @@ static __inline__ int s3c_dma_has_circular(void) #define S3C2410_DMAF_CIRCULAR (1 << 0) -static inline bool s3c_dma_has_circular(void) -{ - return false; -} - #include #endif /* __ASM_ARCH_IRQ_H */ -- cgit v0.10.2 From b3c5496fbfc2e5f64bb85b142615717850fee980 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 9 Nov 2009 23:45:47 +0000 Subject: ARM: S3C64XX: Tidy definition and comments in s3c_dma_has_circular() The recent changes to arch/arm/mach-s3c6400/include/mach/dma.h have left an out of date comment in there as well as accidentally changing the type of the function. Fix the commit 54489cd46a3a268ed981c681726c6d690883f076 Signed-off-by: Ben Dooks diff --git a/arch/arm/mach-s3c6400/include/mach/dma.h b/arch/arm/mach-s3c6400/include/mach/dma.h index 1067619..6723860 100644 --- a/arch/arm/mach-s3c6400/include/mach/dma.h +++ b/arch/arm/mach-s3c6400/include/mach/dma.h @@ -58,12 +58,9 @@ enum dma_ch { DMACH_MAX /* the end */ }; -static __inline__ int s3c_dma_has_circular(void) +static __inline__ bool s3c_dma_has_circular(void) { - /* we will be supporting ciruclar buffers as soon as we have DMA - * engine support. - */ - return 1; + return true; } #define S3C2410_DMAF_CIRCULAR (1 << 0) -- cgit v0.10.2 From 210012a6cd8770a73d1aa74b742667b462d04511 Mon Sep 17 00:00:00 2001 From: Jassi Brar Date: Thu, 5 Nov 2009 13:44:20 +0900 Subject: ARM: S3C64XX: DMA: Protect buffer pointers while manipulation Ensure the DMA buffer points are not updated from another source during the process of enquing a buffer. Signed-off-by: Jassi Brar [ben-linux@fluff.org: Updated patch comment] Signed-off-by: Ben Dooks diff --git a/arch/arm/plat-s3c64xx/dma.c b/arch/arm/plat-s3c64xx/dma.c index 266a107..6fa706f 100644 --- a/arch/arm/plat-s3c64xx/dma.c +++ b/arch/arm/plat-s3c64xx/dma.c @@ -339,6 +339,7 @@ int s3c2410_dma_enqueue(unsigned int channel, void *id, struct s3c64xx_dma_buff *next; struct s3c64xx_dma_buff *buff; struct pl080s_lli *lli; + unsigned long flags; int ret; WARN_ON(!chan); @@ -366,6 +367,8 @@ int s3c2410_dma_enqueue(unsigned int channel, void *id, s3c64xx_dma_fill_lli(chan, lli, data, size); + local_irq_save(flags); + if ((next = chan->next) != NULL) { struct s3c64xx_dma_buff *end = chan->end; struct pl080s_lli *endlli = end->lli; @@ -397,6 +400,8 @@ int s3c2410_dma_enqueue(unsigned int channel, void *id, s3c64xx_lli_to_regs(chan, lli); } + local_irq_restore(flags); + show_lli(lli); dbg_showchan(chan); -- cgit v0.10.2 From 6d0b8627d545aed7d4bcaad2156b6cb95e105715 Mon Sep 17 00:00:00 2001 From: Jassi Brar Date: Thu, 5 Nov 2009 13:44:26 +0900 Subject: ARM: S3C64XX: DMA: Unify callback functions for success/failure Replace s3c64xx_dma_tcirq and s3c64xx_dma_errirq with the common s3c64xx_dma_buffdone. Signed-off-by: Jassi Brar Signed-off-by: Ben Dooks diff --git a/arch/arm/plat-s3c64xx/dma.c b/arch/arm/plat-s3c64xx/dma.c index 6fa706f..5a08a86 100644 --- a/arch/arm/plat-s3c64xx/dma.c +++ b/arch/arm/plat-s3c64xx/dma.c @@ -565,26 +565,11 @@ int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client) EXPORT_SYMBOL(s3c2410_dma_free); - -static void s3c64xx_dma_tcirq(struct s3c64xx_dmac *dmac, int offs) -{ - struct s3c2410_dma_chan *chan = dmac->channels + offs; - - /* note, we currently do not bother to work out which buffer - * or buffers have been completed since the last tc-irq. */ - - if (chan->callback_fn) - (chan->callback_fn)(chan, chan->curr->pw, 0, S3C2410_RES_OK); -} - -static void s3c64xx_dma_errirq(struct s3c64xx_dmac *dmac, int offs) -{ - printk(KERN_DEBUG "%s: offs %d\n", __func__, offs); -} - static irqreturn_t s3c64xx_dma_irq(int irq, void *pw) { struct s3c64xx_dmac *dmac = pw; + struct s3c2410_dma_chan *chan; + enum s3c2410_dma_buffresult res; u32 tcstat, errstat; u32 bit; int offs; @@ -593,15 +578,22 @@ static irqreturn_t s3c64xx_dma_irq(int irq, void *pw) errstat = readl(dmac->regs + PL080_ERR_STATUS); for (offs = 0, bit = 1; offs < 8; offs++, bit <<= 1) { + + if (!(errstat & bit) && !(tcstat & bit)) + continue; + + chan = dmac->channels + offs; + res = S3C2410_RES_ERR; + if (tcstat & bit) { writel(bit, dmac->regs + PL080_TC_CLEAR); - s3c64xx_dma_tcirq(dmac, offs); + res = S3C2410_RES_OK; } - if (errstat & bit) { - s3c64xx_dma_errirq(dmac, offs); + if (errstat & bit) writel(bit, dmac->regs + PL080_ERR_CLEAR); - } + + s3c64xx_dma_bufffdone(chan, chan->curr, res); } return IRQ_HANDLED; -- cgit v0.10.2 From 7507f39c57d4a285aea11c379fbc65c2b3f375ef Mon Sep 17 00:00:00 2001 From: Jassi Brar Date: Thu, 5 Nov 2009 13:44:45 +0900 Subject: ARM: S3C64XX: DMA: Make src and dst transfer size same Some devices don't seem to work if the source and desitnation transfer widths are not same. For example, SPI dma xfers, with 8bits/word, don't work without this patch. Signed-off-by: Jassi Brar Signed-off-by: Ben Dooks diff --git a/arch/arm/plat-s3c64xx/dma.c b/arch/arm/plat-s3c64xx/dma.c index 5a08a86..a94281b 100644 --- a/arch/arm/plat-s3c64xx/dma.c +++ b/arch/arm/plat-s3c64xx/dma.c @@ -151,8 +151,6 @@ static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan, src = chan->dev_addr; dst = data; control0 = PL080_CONTROL_SRC_AHB2; - control0 |= (u32)chan->hw_width << PL080_CONTROL_SWIDTH_SHIFT; - control0 |= 2 << PL080_CONTROL_DWIDTH_SHIFT; control0 |= PL080_CONTROL_DST_INCR; break; @@ -160,8 +158,6 @@ static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan, src = data; dst = chan->dev_addr; control0 = PL080_CONTROL_DST_AHB2; - control0 |= (u32)chan->hw_width << PL080_CONTROL_DWIDTH_SHIFT; - control0 |= 2 << PL080_CONTROL_SWIDTH_SHIFT; control0 |= PL080_CONTROL_SRC_INCR; break; default: @@ -173,6 +169,8 @@ static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan, control1 = size >> chan->hw_width; /* size in no of xfers */ control0 |= PL080_CONTROL_PROT_SYS; /* always in priv. mode */ control0 |= PL080_CONTROL_TC_IRQ_EN; /* always fire IRQ */ + control0 |= (u32)chan->hw_width << PL080_CONTROL_DWIDTH_SHIFT; + control0 |= (u32)chan->hw_width << PL080_CONTROL_SWIDTH_SHIFT; lli->src_addr = src; lli->dst_addr = dst; -- cgit v0.10.2 From 9b08284bf22f438baa2d6b68015ff17ddb431a61 Mon Sep 17 00:00:00 2001 From: Jassi Brar Date: Thu, 5 Nov 2009 13:44:33 +0900 Subject: ARM: S3C64XX: DMA: Callback with correct buffer pointer buffdone callback should be called per buffer request with pointer to the latest serviced request. 'next' should point to the one next to currently active. Signed-off-by: Jassi Brar Signed-off-by: Ben Dooks diff --git a/arch/arm/plat-s3c64xx/dma.c b/arch/arm/plat-s3c64xx/dma.c index a94281b..7d12eb8f 100644 --- a/arch/arm/plat-s3c64xx/dma.c +++ b/arch/arm/plat-s3c64xx/dma.c @@ -576,6 +576,7 @@ static irqreturn_t s3c64xx_dma_irq(int irq, void *pw) errstat = readl(dmac->regs + PL080_ERR_STATUS); for (offs = 0, bit = 1; offs < 8; offs++, bit <<= 1) { + struct s3c64xx_dma_buff *buff; if (!(errstat & bit) && !(tcstat & bit)) continue; @@ -591,7 +592,33 @@ static irqreturn_t s3c64xx_dma_irq(int irq, void *pw) if (errstat & bit) writel(bit, dmac->regs + PL080_ERR_CLEAR); - s3c64xx_dma_bufffdone(chan, chan->curr, res); + /* 'next' points to the buffer that is next to the + * currently active buffer. + * For CIRCULAR queues, 'next' will be same as 'curr' + * when 'end' is the active buffer. + */ + buff = chan->curr; + while (buff && buff != chan->next + && buff->next != chan->next) + buff = buff->next; + + if (!buff) + BUG(); + + if (buff == chan->next) + buff = chan->end; + + s3c64xx_dma_bufffdone(chan, buff, res); + + /* Update 'next' */ + buff = chan->next; + if (chan->next == chan->end) { + chan->next = chan->curr; + if (!(chan->flags & S3C2410_DMAF_CIRCULAR)) + chan->end = NULL; + } else { + chan->next = buff->next; + } } return IRQ_HANDLED; -- cgit v0.10.2 From 336b1a3181d81db85c0af3d0c18fe0a04b4d5126 Mon Sep 17 00:00:00 2001 From: Jassi Brar Date: Thu, 5 Nov 2009 13:44:39 +0900 Subject: ARM: S3C64XX: DMA: Free node for non-circular queues We need to free the buff and lli nodes if the buffer queue is not CIRCULAR. Signed-off-by: Jassi Brar Signed-off-by: Ben Dooks diff --git a/arch/arm/plat-s3c64xx/dma.c b/arch/arm/plat-s3c64xx/dma.c index 7d12eb8f..d554b93 100644 --- a/arch/arm/plat-s3c64xx/dma.c +++ b/arch/arm/plat-s3c64xx/dma.c @@ -610,6 +610,12 @@ static irqreturn_t s3c64xx_dma_irq(int irq, void *pw) s3c64xx_dma_bufffdone(chan, buff, res); + /* Free the node and update curr, if non-circular queue */ + if (!(chan->flags & S3C2410_DMAF_CIRCULAR)) { + chan->curr = buff->next; + s3c64xx_dma_freebuff(buff); + } + /* Update 'next' */ buff = chan->next; if (chan->next == chan->end) { -- cgit v0.10.2 From 5ebd4c22897dce65845807a9bd3a31cc4e142b53 Mon Sep 17 00:00:00 2001 From: Soeren Sandmann Date: Wed, 28 Oct 2009 18:55:36 +0100 Subject: highmem: Fix race in debug_kmap_atomic() which could cause warn_count to underflow debug_kmap_atomic() tries to prevent ever printing more than 10 warnings, but it does so by testing whether an unsigned integer is equal to 0. However, if the warning is caused by a nested IRQ, then this counter may underflow and the stream of warnings will never end. Fix that by using a signed integer instead. Signed-off-by: Soeren Sandmann Pedersen Cc: Linus Torvalds Cc: a.p.zijlstra@chello.nl Cc: # .31.x LKML-Reference: Signed-off-by: Ingo Molnar diff --git a/mm/highmem.c b/mm/highmem.c index 25878cc..33587de 100644 --- a/mm/highmem.c +++ b/mm/highmem.c @@ -426,9 +426,9 @@ void __init page_address_init(void) void debug_kmap_atomic(enum km_type type) { - static unsigned warn_count = 10; + static int warn_count = 10; - if (unlikely(warn_count == 0)) + if (unlikely(warn_count < 0)) return; if (unlikely(in_interrupt())) { -- cgit v0.10.2 From d4515646699b6ad7b1a98ceb871296b957f3ef47 Mon Sep 17 00:00:00 2001 From: Soeren Sandmann Date: Wed, 28 Oct 2009 18:56:35 +0100 Subject: highmem: Fix debug_kmap_atomic() to also handle KM_IRQ_PTE, KM_NMI, and KM_NMI_PTE Previously calling debug_kmap_atomic() with these types would cause spurious warnings. (triggered by SysProf using perf events) Signed-off-by: Soeren Sandmann Pedersen Cc: Linus Torvalds Cc: a.p.zijlstra@chello.nl Cc: # .31.x LKML-Reference: Signed-off-by: Ingo Molnar diff --git a/mm/highmem.c b/mm/highmem.c index 33587de..9c1e627 100644 --- a/mm/highmem.c +++ b/mm/highmem.c @@ -432,10 +432,15 @@ void debug_kmap_atomic(enum km_type type) return; if (unlikely(in_interrupt())) { - if (in_irq()) { + if (in_nmi()) { + if (type != KM_NMI && type != KM_NMI_PTE) { + WARN_ON(1); + warn_count--; + } + } else if (in_irq()) { if (type != KM_IRQ0 && type != KM_IRQ1 && type != KM_BIO_SRC_IRQ && type != KM_BIO_DST_IRQ && - type != KM_BOUNCE_READ) { + type != KM_BOUNCE_READ && type != KM_IRQ_PTE) { WARN_ON(1); warn_count--; } @@ -452,7 +457,9 @@ void debug_kmap_atomic(enum km_type type) } if (type == KM_IRQ0 || type == KM_IRQ1 || type == KM_BOUNCE_READ || - type == KM_BIO_SRC_IRQ || type == KM_BIO_DST_IRQ) { + type == KM_BIO_SRC_IRQ || type == KM_BIO_DST_IRQ || + type == KM_IRQ_PTE || type == KM_NMI || + type == KM_NMI_PTE ) { if (!irqs_disabled()) { WARN_ON(1); warn_count--; -- cgit v0.10.2 From a39533b4ddad388b64a20bcabd17ac125fd4ba65 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 9 Nov 2009 16:41:21 -0500 Subject: drm/radeon/r600: CS parser updates Add some additional regs that require relocs. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c index 17e4219..0d82076 100644 --- a/drivers/gpu/drm/radeon/r600_cs.c +++ b/drivers/gpu/drm/radeon/r600_cs.c @@ -466,6 +466,23 @@ static int r600_packet3_check(struct radeon_cs_parser *p, for (i = 0; i < pkt->count; i++) { reg = start_reg + (4 * i); switch (reg) { + case SQ_ESGS_RING_BASE: + case SQ_GSVS_RING_BASE: + case SQ_ESTMP_RING_BASE: + case SQ_GSTMP_RING_BASE: + case SQ_VSTMP_RING_BASE: + case SQ_PSTMP_RING_BASE: + case SQ_FBUF_RING_BASE: + case SQ_REDUC_RING_BASE: + case SX_MEMORY_EXPORT_BASE: + r = r600_cs_packet_next_reloc(p, &reloc); + if (r) { + DRM_ERROR("bad SET_CONFIG_REG " + "0x%04X\n", reg); + return -EINVAL; + } + ib[idx+1+i] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff); + break; case CP_COHER_BASE: /* use PACKET3_SURFACE_SYNC */ return -EINVAL; @@ -487,6 +504,7 @@ static int r600_packet3_check(struct radeon_cs_parser *p, reg = start_reg + (4 * i); switch (reg) { case DB_DEPTH_BASE: + case DB_HTILE_DATA_BASE: case CB_COLOR0_BASE: case CB_COLOR1_BASE: case CB_COLOR2_BASE: diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h index cf238bf..b99f45d 100644 --- a/drivers/gpu/drm/radeon/r600d.h +++ b/drivers/gpu/drm/radeon/r600d.h @@ -118,6 +118,7 @@ #define DB_DEBUG 0x9830 #define PREZ_MUST_WAIT_FOR_POSTZ_DONE (1 << 31) #define DB_DEPTH_BASE 0x2800C +#define DB_HTILE_DATA_BASE 0x28014 #define DB_WATERMARKS 0x9838 #define DEPTH_FREE(x) ((x) << 0) #define DEPTH_FLUSH(x) ((x) << 5) @@ -170,6 +171,14 @@ #define SQ_STACK_RESOURCE_MGMT_2 0x8c14 # define NUM_GS_STACK_ENTRIES(x) ((x) << 0) # define NUM_ES_STACK_ENTRIES(x) ((x) << 16) +#define SQ_ESGS_RING_BASE 0x8c40 +#define SQ_GSVS_RING_BASE 0x8c48 +#define SQ_ESTMP_RING_BASE 0x8c50 +#define SQ_GSTMP_RING_BASE 0x8c58 +#define SQ_VSTMP_RING_BASE 0x8c60 +#define SQ_PSTMP_RING_BASE 0x8c68 +#define SQ_FBUF_RING_BASE 0x8c70 +#define SQ_REDUC_RING_BASE 0x8c78 #define GRBM_CNTL 0x8000 # define GRBM_READ_TIMEOUT(x) ((x) << 0) @@ -355,6 +364,7 @@ #define SX_MISC 0x28350 +#define SX_MEMORY_EXPORT_BASE 0x9010 #define SX_DEBUG_1 0x9054 #define SMX_EVENT_RELEASE (1 << 0) #define ENABLE_NEW_SMX_ADDRESS (1 << 16) -- cgit v0.10.2 From eeba57518c01cf462d87bbfc59049139da47adcb Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Sat, 7 Nov 2009 16:27:32 +0100 Subject: drm/kms: Init the CRTC info fields for modes forced from the command line. Fixes fdo bug 24710. Signed-off-by: Francisco Jerez Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index 1fe4e1d..bbfd110 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -331,6 +331,7 @@ create_mode: cmdline_mode->refresh_specified ? cmdline_mode->refresh : 60, cmdline_mode->rb, cmdline_mode->interlace, cmdline_mode->margins); + drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V); list_add(&mode->head, &connector->modes); return mode; } -- cgit v0.10.2 From 506f90eeae682dc96c11c7aefac0262b3a560b49 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Thu, 29 Oct 2009 14:45:52 +0100 Subject: x86, amd-ucode: Check UCODE_MAGIC before loading the container file Signed-off-by: Borislav Petkov Signed-off-by: Andreas Herrmann LKML-Reference: <20091029134552.GC30802@alberich.amd.com> Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c index 366baa1..f4c538b 100644 --- a/arch/x86/kernel/microcode_amd.c +++ b/arch/x86/kernel/microcode_amd.c @@ -317,6 +317,12 @@ static enum ucode_state request_microcode_fw(int cpu, struct device *device) return UCODE_NFOUND; } + if (*(u32 *)firmware->data != UCODE_MAGIC) { + printk(KERN_ERR "microcode: invalid UCODE_MAGIC (0x%08x)\n", + *(u32 *)firmware->data); + return UCODE_ERROR; + } + ret = generic_load_microcode(cpu, firmware->data, firmware->size); release_firmware(firmware); -- cgit v0.10.2 From dbaccc0cca830efe9bb3c9e4a1cfcd6503790079 Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Mon, 9 Nov 2009 15:17:24 +0000 Subject: ALSA: hda - Tweak OLPC XO-1.5 microphone bias Our contacts at Conexant suggested that we reduce the external microphone bias to 50% in order to center the input signal with the DC input range of the codec. This is because the microphone port is DC coupled for potential use with sensors. Signed-off-by: Daniel Drake Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index 6479e65..905859d 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -110,6 +110,7 @@ struct conexant_spec { unsigned int dell_automute; unsigned int port_d_mode; + unsigned char ext_mic_bias; }; static int conexant_playback_pcm_open(struct hda_pcm_stream *hinfo, @@ -1927,6 +1928,11 @@ static hda_nid_t cxt5066_adc_nids[3] = { 0x14, 0x15, 0x16 }; static hda_nid_t cxt5066_capsrc_nids[1] = { 0x17 }; #define CXT5066_SPDIF_OUT 0x21 +/* OLPC's microphone port is DC coupled for use with external sensors, + * therefore we use a 50% mic bias in order to center the input signal with + * the DC input range of the codec. */ +#define CXT5066_OLPC_EXT_MIC_BIAS PIN_VREF50 + static struct hda_channel_mode cxt5066_modes[1] = { { 2, NULL }, }; @@ -1980,9 +1986,10 @@ static int cxt5066_hp_master_sw_put(struct snd_kcontrol *kcontrol, /* toggle input of built-in and mic jack appropriately */ static void cxt5066_automic(struct hda_codec *codec) { - static struct hda_verb ext_mic_present[] = { + struct conexant_spec *spec = codec->spec; + struct hda_verb ext_mic_present[] = { /* enable external mic, port B */ - {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, + {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, spec->ext_mic_bias}, /* switch to external mic input */ {0x17, AC_VERB_SET_CONNECT_SEL, 0}, @@ -2235,7 +2242,7 @@ static struct hda_verb cxt5066_init_verbs_olpc[] = { {0x19, AC_VERB_SET_CONNECT_SEL, 0x00}, /* DAC1 */ /* Port B: external microphone */ - {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, + {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, CXT5066_OLPC_EXT_MIC_BIAS}, /* Port C: internal microphone */ {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, @@ -2353,6 +2360,7 @@ static int patch_cxt5066(struct hda_codec *codec) spec->input_mux = &cxt5066_capture_source; spec->port_d_mode = PIN_HP; + spec->ext_mic_bias = PIN_VREF80; spec->num_init_verbs = 1; spec->init_verbs[0] = cxt5066_init_verbs; @@ -2384,6 +2392,7 @@ static int patch_cxt5066(struct hda_codec *codec) spec->mixers[spec->num_mixers++] = cxt5066_mixer_master_olpc; spec->mixers[spec->num_mixers++] = cxt5066_mixers; spec->port_d_mode = 0; + spec->ext_mic_bias = CXT5066_OLPC_EXT_MIC_BIAS; /* no S/PDIF out */ spec->multiout.dig_out_nid = 0; -- cgit v0.10.2 From cc20d42986d5807cbe4f5c7c8e3dab2e59ea0db3 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 9 Nov 2009 23:53:29 +0000 Subject: ARM: Use a definition for the userspace cmpxchg emulation syscall Use a definition for the cmpxchg SWI instead of hard-coding the number. Signed-off-by: Russell King Acked-by: Nicolas Pitre diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 7020217..4e506d0 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -403,6 +403,15 @@ #define __ARM_NR_set_tls (__ARM_NR_BASE+5) /* + * *NOTE*: This is a ghost syscall private to the kernel. Only the + * __kuser_cmpxchg code in entry-armv.S should be aware of its + * existence. Don't ever use this from user code. + */ +#ifdef __KERNEL__ +#define __ARM_NR_cmpxchg (__ARM_NR_BASE+0x00fff0) +#endif + +/* * The following syscalls are obsolete and no longer available for EABI. */ #if defined(__ARM_EABI__) && !defined(__KERNEL__) diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 0022b4d..d2903e3 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -21,6 +21,7 @@ #include #include #include +#include #include "entry-header.S" @@ -908,10 +909,10 @@ __kuser_cmpxchg: @ 0xffff0fc0 * A special ghost syscall is used for that (see traps.c). */ stmfd sp!, {r7, lr} - mov r7, #0xff00 @ 0xfff0 into r7 for EABI - orr r7, r7, #0xf0 - swi #0x9ffff0 + ldr r7, =1f @ it's 20 bits + swi __ARM_NR_cmpxchg ldmfd sp!, {r7, pc} +1: .word __ARM_NR_cmpxchg #elif __LINUX_ARM_ARCH__ < 6 diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 1bbda04..3f361a7 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -528,7 +528,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs) * __kuser_cmpxchg code in entry-armv.S should be aware of its * existence. Don't ever use this from user code. */ - case 0xfff0: + case NR(cmpxchg): for (;;) { extern void do_DataAbort(unsigned long addr, unsigned int fsr, struct pt_regs *regs); -- cgit v0.10.2 From 1efd374d78834a793663414402911765bcdda6eb Mon Sep 17 00:00:00 2001 From: Denis Turischev Date: Thu, 5 Nov 2009 13:32:40 +0200 Subject: [WATCHDOG] SBC-FITPC2 watchdog driver registration fix This patch fixes device registration process. Signed-off-by: Denis Turischev Signed-off-by: Wim Van Sebroeck diff --git a/drivers/watchdog/sbc_fitpc2_wdt.c b/drivers/watchdog/sbc_fitpc2_wdt.c index 852ca19..91430a8 100644 --- a/drivers/watchdog/sbc_fitpc2_wdt.c +++ b/drivers/watchdog/sbc_fitpc2_wdt.c @@ -227,7 +227,7 @@ static int __init fitpc2_wdt_init(void) } err = misc_register(&fitpc2_wdt_miscdev); - if (!err) { + if (err) { pr_err("cannot register miscdev on minor=%d (err=%d)\n", WATCHDOG_MINOR, err); goto err_margin; -- cgit v0.10.2 From 4ac55982907e1d48e64feaa56be91b9b52d3714d Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 10 Nov 2009 16:08:45 +0100 Subject: ALSA: hda - Avoid quirk for HP dc5750 The present quirk for HP dc5750 seems broken and maps the pins wrongly. Since the auto-parser works well for this device, set the default entry to use model=auto. Reference: Novell bnc#552154 https://bugzilla.novell.com/show_bug.cgi?id=552154 Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 9bb4f75..d1ccb6e 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6249,7 +6249,7 @@ static struct snd_pci_quirk alc260_cfg_tbl[] = { SND_PCI_QUIRK(0x1025, 0x008f, "Acer", ALC260_ACER), SND_PCI_QUIRK(0x1509, 0x4540, "Favorit 100XS", ALC260_FAVORIT100), SND_PCI_QUIRK(0x103c, 0x2808, "HP d5700", ALC260_HP_3013), - SND_PCI_QUIRK(0x103c, 0x280a, "HP d5750", ALC260_HP_3013), + SND_PCI_QUIRK(0x103c, 0x280a, "HP d5750", ALC260_AUTO), /* no quirk */ SND_PCI_QUIRK(0x103c, 0x3010, "HP", ALC260_HP_3013), SND_PCI_QUIRK(0x103c, 0x3011, "HP", ALC260_HP_3013), SND_PCI_QUIRK(0x103c, 0x3012, "HP", ALC260_HP_DC7600), -- cgit v0.10.2 From 8579d2d7779d7ff41ea2a0183015e0e5038f1043 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Wed, 21 Oct 2009 09:09:38 +0200 Subject: sound: rawmidi: fix double init when opening MIDI device with O_APPEND Commit 9a1b64caac82aa02cb74587ffc798e6f42c6170a in 2.6.30 moved the substream initialization code to where it would be executed every time the substream is opened. This had the consequence that any further opening would drop and leak the data in the existing buffer, and that the device driver's open callback would be called multiple times, unexpectedly. Signed-off-by: Clemens Ladisch Cc: Signed-off-by: Takashi Iwai diff --git a/sound/core/rawmidi.c b/sound/core/rawmidi.c index c0adc14..3071e6f 100644 --- a/sound/core/rawmidi.c +++ b/sound/core/rawmidi.c @@ -266,17 +266,19 @@ static int open_substream(struct snd_rawmidi *rmidi, { int err; - err = snd_rawmidi_runtime_create(substream); - if (err < 0) - return err; - err = substream->ops->open(substream); - if (err < 0) - return err; - substream->opened = 1; - if (substream->use_count++ == 0) + if (substream->use_count == 0) { + err = snd_rawmidi_runtime_create(substream); + if (err < 0) + return err; + err = substream->ops->open(substream); + if (err < 0) + return err; + substream->opened = 1; substream->active_sensing = 0; - if (mode & SNDRV_RAWMIDI_LFLG_APPEND) - substream->append = 1; + if (mode & SNDRV_RAWMIDI_LFLG_APPEND) + substream->append = 1; + } + substream->use_count++; rmidi->streams[substream->stream].substream_opened++; return 0; } -- cgit v0.10.2 From 16fb109644b5644e42ececeff644514de6f4bd03 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Wed, 21 Oct 2009 09:10:16 +0200 Subject: sound: rawmidi: fix checking of O_APPEND when opening MIDI device Commit 9a1b64caac82aa02cb74587ffc798e6f42c6170a in 2.6.30 dropped the check that a substream must already have been opened with O_APPEND to be able to open it a second time. This would make it possible for a substream to be switched to append mode, which would mean that non-atomic writes would fail unexpectedly. Signed-off-by: Clemens Ladisch Cc: Signed-off-by: Takashi Iwai diff --git a/sound/core/rawmidi.c b/sound/core/rawmidi.c index 3071e6f..0914053 100644 --- a/sound/core/rawmidi.c +++ b/sound/core/rawmidi.c @@ -248,7 +248,8 @@ static int assign_substream(struct snd_rawmidi *rmidi, int subdevice, list_for_each_entry(substream, &s->substreams, list) { if (substream->opened) { if (stream == SNDRV_RAWMIDI_STREAM_INPUT || - !(mode & SNDRV_RAWMIDI_LFLG_APPEND)) + !(mode & SNDRV_RAWMIDI_LFLG_APPEND) || + !substream->append) continue; } if (subdevice < 0 || subdevice == substream->number) { -- cgit v0.10.2 From b7fe750fcceda4fa6bef399b0e2812562728ea82 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Wed, 21 Oct 2009 09:11:43 +0200 Subject: sound: rawmidi: fix MIDI device O_APPEND error handling Commit 9a1b64caac82aa02cb74587ffc798e6f42c6170a in 2.6.30 broke the error handling code in rawmidi_open_priv(). If only the output substream of a RawMIDI device has been opened and if this device is then opened with O_RDWR | O_APPEND and if the initialization of the input substream fails (either because of low memory or because the device driver's open callback fails), then the runtime structure of the already open output substream will be freed and all following writes through the first handle will cause snd_rawmidi_write() to use the NULL runtime pointer. Signed-off-by: Clemens Ladisch Cc: Signed-off-by: Takashi Iwai diff --git a/sound/core/rawmidi.c b/sound/core/rawmidi.c index 0914053..70d6f25 100644 --- a/sound/core/rawmidi.c +++ b/sound/core/rawmidi.c @@ -272,8 +272,10 @@ static int open_substream(struct snd_rawmidi *rmidi, if (err < 0) return err; err = substream->ops->open(substream); - if (err < 0) + if (err < 0) { + snd_rawmidi_runtime_free(substream); return err; + } substream->opened = 1; substream->active_sensing = 0; if (mode & SNDRV_RAWMIDI_LFLG_APPEND) @@ -300,27 +302,27 @@ static int rawmidi_open_priv(struct snd_rawmidi *rmidi, int subdevice, int mode, SNDRV_RAWMIDI_STREAM_INPUT, mode, &sinput); if (err < 0) - goto __error; + return err; } if (mode & SNDRV_RAWMIDI_LFLG_OUTPUT) { err = assign_substream(rmidi, subdevice, SNDRV_RAWMIDI_STREAM_OUTPUT, mode, &soutput); if (err < 0) - goto __error; + return err; } if (sinput) { err = open_substream(rmidi, sinput, mode); if (err < 0) - goto __error; + return err; } if (soutput) { err = open_substream(rmidi, soutput, mode); if (err < 0) { if (sinput) close_substream(rmidi, sinput, 0); - goto __error; + return err; } } @@ -328,13 +330,6 @@ static int rawmidi_open_priv(struct snd_rawmidi *rmidi, int subdevice, int mode, rfile->input = sinput; rfile->output = soutput; return 0; - - __error: - if (sinput && sinput->runtime) - snd_rawmidi_runtime_free(sinput); - if (soutput && soutput->runtime) - snd_rawmidi_runtime_free(soutput); - return err; } /* called from sound/core/seq/seq_midi.c */ -- cgit v0.10.2 From f56ab498db55f1b7f5219aa5c7a04d562392cbb8 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Tue, 6 Oct 2009 10:52:50 -0500 Subject: powerpc: pasemi_defconfig update pasemi_defconfig hasn't been updated for a year. Mostly a refresh of defaults, but this also disables 64K pages. Signed-off-by: Olof Johansson Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/configs/pasemi_defconfig b/arch/powerpc/configs/pasemi_defconfig index 4f8681c..20ba0cf 100644 --- a/arch/powerpc/configs/pasemi_defconfig +++ b/arch/powerpc/configs/pasemi_defconfig @@ -1,49 +1,58 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc3 -# Tue May 27 16:08:06 2008 +# Linux kernel version: 2.6.32-rc3 +# Tue Oct 6 10:27:18 2009 # CONFIG_PPC64=y # # Processor support # +CONFIG_PPC_BOOK3S_64=y +# CONFIG_PPC_BOOK3E_64 is not set +CONFIG_PPC_BOOK3S=y CONFIG_POWER4_ONLY=y CONFIG_POWER4=y # CONFIG_TUNE_CELL is not set CONFIG_PPC_FPU=y CONFIG_ALTIVEC=y +# CONFIG_VSX is not set CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_64=y CONFIG_PPC_MM_SLICES=y # CONFIG_VIRT_CPU_ACCOUNTING is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y +CONFIG_PPC_PERF_CTRS=y CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_64BIT=y CONFIG_WORD_SIZE=64 -CONFIG_PPC_MERGE=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y +CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_ARCH_HAS_ILOG2_U64=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y CONFIG_SYSVIPC_COMPAT=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -51,11 +60,14 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set # CONFIG_PPC_OF_PLATFORM_PCI is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -72,10 +84,20 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=64 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -84,13 +106,17 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -98,32 +124,52 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +CONFIG_PERF_EVENTS=y +CONFIG_EVENT_PROFILE=y +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y -# CONFIG_MARKERS is not set +CONFIG_TRACEPOINTS=y CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_SYSCALL_WRAPPERS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_USE_GENERIC_SMP_HELPERS=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -131,11 +177,10 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set CONFIG_BLOCK_COMPAT=y # @@ -150,19 +195,14 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set +CONFIG_PPC_MSI_BITMAP=y # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_PPC_82xx is not set -# CONFIG_PPC_83xx is not set -# CONFIG_PPC_86xx is not set # CONFIG_PPC_PSERIES is not set # CONFIG_PPC_ISERIES is not set -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_PMAC is not set # CONFIG_PPC_MAPLE is not set CONFIG_PPC_PASEMI=y @@ -178,8 +218,10 @@ CONFIG_PPC_PASEMI_MDIO=y # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PPC_IBM_CELL_BLADE is not set # CONFIG_PPC_CELLEB is not set +# CONFIG_PPC_CELL_QPACE is not set # CONFIG_PQ2ADS is not set CONFIG_PPC_NATIVE=y +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set @@ -213,6 +255,7 @@ CONFIG_CPU_FREQ_GOV_ONDEMAND=y # CONFIG_PPC_PASEMI_CPUFREQ=y # CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -226,16 +269,19 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_300 is not set CONFIG_HZ_1000=y CONFIG_HZ=1000 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y CONFIG_COMPAT_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y CONFIG_IOMMU_VMERGE=y CONFIG_IOMMU_HELPER=y +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -243,6 +289,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_CRASH_DUMP is not set # CONFIG_IRQ_ALL_CPUS is not set # CONFIG_NUMA is not set +CONFIG_MAX_ACTIVE_REGIONS=256 CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y @@ -253,20 +300,28 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_RESOURCES_64BIT=y +CONFIG_MIGRATION=y +CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_HAS_HASH_64K=y +# CONFIG_PPC_4K_PAGES is not set +# CONFIG_PPC_16K_PAGES is not set CONFIG_PPC_64K_PAGES=y +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=9 # CONFIG_PPC_SUBPAGE_PROT is not set # CONFIG_SCHED_SMT is not set CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set # CONFIG_SECCOMP is not set CONFIG_ISA_DMA_API=y @@ -285,6 +340,8 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set CONFIG_PCCARD=y CONFIG_PCMCIA_DEBUG=y CONFIG_PCMCIA=y @@ -301,13 +358,10 @@ CONFIG_CARDBUS=y CONFIG_ELECTRA_CF=y # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set +# CONFIG_RELOCATABLE is not set CONFIG_PAGE_OFFSET=0xc000000000000000 CONFIG_KERNEL_START=0xc000000000000000 CONFIG_PHYSICAL_START=0x00000000 - -# -# Networking -# CONFIG_NET=y # @@ -356,9 +410,11 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -368,25 +424,32 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set +# CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 +# CONFIG_WIRELESS_OLD_REGULATORY is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # -# Wireless +# CFG80211 needs to be enabled for MAC80211 # -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -398,15 +461,19 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set CONFIG_MTD_CONCAT=y # CONFIG_MTD_PARTITIONS is not set @@ -478,11 +545,17 @@ CONFIG_MTD_NAND_PASEMI=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -501,29 +574,41 @@ CONFIG_BLK_DEV_RAM_SIZE=16384 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=y +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -CONFIG_IDEDISK_MULTI_MODE=y +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set # CONFIG_BLK_DEV_IDECS is not set # CONFIG_BLK_DEV_DELKIN is not set CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -CONFIG_BLK_DEV_IDESCSI=y CONFIG_IDE_TASK_IOCTL=y CONFIG_IDE_PROC_FS=y @@ -542,14 +627,13 @@ CONFIG_IDE_PROC_FS=y # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8172 is not set # CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set @@ -563,8 +647,6 @@ CONFIG_IDE_PROC_FS=y # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_TC86C001 is not set # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_BLK_DEV_HD_ONLY is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -586,10 +668,6 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y CONFIG_CHR_DEV_SCH=y - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y @@ -606,6 +684,8 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -614,11 +694,16 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -626,7 +711,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -637,10 +721,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set CONFIG_SATA_SIL24=y @@ -662,6 +750,7 @@ CONFIG_SATA_MV=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -690,6 +779,7 @@ CONFIG_ATA_GENERIC=y CONFIG_PATA_PCMCIA=y # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -703,12 +793,15 @@ CONFIG_PATA_OF_PLATFORM=y # CONFIG_PATA_SCH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y CONFIG_MD_RAID10=y CONFIG_MD_RAID456=y -CONFIG_MD_RAID5_RESHAPE=y +# CONFIG_MULTICORE_RAID456 is not set +CONFIG_MD_RAID6_PQ=y +# CONFIG_ASYNC_RAID6_TEST is not set # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=y @@ -725,12 +818,19 @@ CONFIG_DM_CRYPT=y # # IEEE 1394 (FireWire) support # + +# +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -753,6 +853,9 @@ CONFIG_MARVELL_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -761,19 +864,23 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -783,19 +890,22 @@ CONFIG_NET_PCI=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=y -CONFIG_E1000_NAPI=y -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -806,30 +916,40 @@ CONFIG_E1000_NAPI=y # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set CONFIG_PASEMI_MAC=y +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set +CONFIG_WLAN=y +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # -# Wireless LAN +# Enable WiMAX (Networking options) to see the WiMAX drivers # -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -874,17 +994,23 @@ CONFIG_INPUT_EVDEV=y # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set # CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set CONFIG_INPUT_MOUSE=y # CONFIG_MOUSE_PS2 is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_SYNAPTICS_I2C is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set @@ -900,6 +1026,7 @@ CONFIG_INPUT_MOUSE=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set @@ -926,10 +1053,13 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=4 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set CONFIG_HW_RANDOM_PASEMI=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -948,57 +1078,85 @@ CONFIG_MAX_RAW_DEVS=256 CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -CONFIG_I2C_PASEMI=y -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_PASEMI=y +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -CONFIG_EEPROM_LEGACY=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y CONFIG_HWMON_VID=y +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -1006,14 +1164,17 @@ CONFIG_HWMON_VID=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -1028,10 +1189,14 @@ CONFIG_SENSORS_LM85=y CONFIG_SENSORS_LM90=y # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -1039,6 +1204,8 @@ CONFIG_SENSORS_LM90=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1050,44 +1217,40 @@ CONFIG_SENSORS_LM90=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y CONFIG_DRM=y +CONFIG_DRM_KMS_HELPER=y +CONFIG_DRM_TTM=y # CONFIG_DRM_TDFX is not set # CONFIG_DRM_R128 is not set CONFIG_DRM_RADEON=y @@ -1099,6 +1262,7 @@ CONFIG_VGASTATE=y CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_DDC=y +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -1140,6 +1304,7 @@ CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set @@ -1148,12 +1313,16 @@ CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set # CONFIG_FB_IBM_GXT4500 is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y -# CONFIG_BACKLIGHT_CORGI is not set +CONFIG_BACKLIGHT_GENERIC=y # # Display device support @@ -1177,15 +1346,9 @@ CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y - -# -# Sound -# CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# +CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -1198,24 +1361,24 @@ CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_HRTIMER is not set # CONFIG_SND_DYNAMIC_MINORS is not set CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# +CONFIG_SND_RAWMIDI_SEQ=y +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set - -# -# PCI devices -# +CONFIG_SND_PCI=y # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALS4000 is not set @@ -1234,6 +1397,7 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS5530 is not set +# CONFIG_SND_CTXFI is not set # CONFIG_SND_DARLA20 is not set # CONFIG_SND_GINA20 is not set # CONFIG_SND_LAYLA20 is not set @@ -1246,6 +1410,8 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_INDIGO is not set # CONFIG_SND_INDIGOIO is not set # CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGOIOX is not set +# CONFIG_SND_INDIGODJX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set @@ -1262,6 +1428,7 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_KORG1212 is not set +# CONFIG_SND_LX6464ES is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set @@ -1277,57 +1444,64 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set - -# -# ALSA PowerMac devices -# - -# -# ALSA PowerPC devices -# - -# -# USB devices -# +CONFIG_SND_PPC=y +CONFIG_SND_USB=y CONFIG_SND_USB_AUDIO=y CONFIG_SND_USB_USX2Y=y # CONFIG_SND_USB_CAIAQ is not set - -# -# PCMCIA devices -# +CONFIG_SND_PCMCIA=y # CONFIG_SND_VXPOCKET is not set # CONFIG_SND_PDAUDIOCF is not set - -# -# System on Chip audio support -# # CONFIG_SND_SOC is not set - -# -# ALSA SoC audio for Freescale SOCs -# - -# -# SoC Audio for the Texas Instruments OMAP -# - -# -# Open Sound System -# # CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DRAGONRISE=y +# CONFIG_DRAGONRISE_FF is not set +CONFIG_HID_EZKEY=y +CONFIG_HID_KYE=y +CONFIG_HID_GYRATION=y +CONFIG_HID_TWINHAN=y +CONFIG_HID_KENSINGTON=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_NTRIG=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +CONFIG_HID_GREENASIA=y +# CONFIG_GREENASIA_FF is not set +CONFIG_HID_SMARTJOYPLUS=y +# CONFIG_SMARTJOYPLUS_FF is not set +CONFIG_HID_TOPSEED=y +CONFIG_HID_THRUSTMASTER=y +# CONFIG_THRUSTMASTER_FF is not set +CONFIG_HID_ZEROPLUS=y +# CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1343,18 +1517,26 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_HCD_PPC_OF=y +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set +# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set # CONFIG_USB_OHCI_HCD_PPC_OF is not set # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -1363,6 +1545,8 @@ CONFIG_USB_UHCI_HCD=y CONFIG_USB_SL811_HCD=y # CONFIG_USB_SL811_CS is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1370,20 +1554,20 @@ CONFIG_USB_SL811_HCD=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# may also be needed; see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set @@ -1399,7 +1583,6 @@ CONFIG_USB_LIBUSUAL=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -# CONFIG_USB_MON is not set # # USB port drivers @@ -1412,7 +1595,7 @@ CONFIG_USB_LIBUSUAL=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1420,7 +1603,6 @@ CONFIG_USB_LIBUSUAL=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1429,7 +1611,15 @@ CONFIG_USB_LIBUSUAL=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1443,6 +1633,7 @@ CONFIG_EDAC=y # CONFIG_EDAC_DEBUG is not set CONFIG_EDAC_MM_EDAC=y CONFIG_EDAC_PASEMI=y +# CONFIG_EDAC_CPC925 is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1472,6 +1663,9 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1481,21 +1675,31 @@ CONFIG_RTC_DRV_DS1307=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# # File systems # CONFIG_EXT2_FS=y @@ -1504,11 +1708,13 @@ CONFIG_EXT2_FS_POSIX_ACL=y # CONFIG_EXT2_FS_SECURITY is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set @@ -1516,6 +1722,10 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1525,6 +1735,11 @@ CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y @@ -1549,16 +1764,14 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_CONFIGFS_FS=y - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1578,8 +1791,10 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -1590,18 +1805,17 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_V4=y -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1672,25 +1886,30 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set CONFIG_CRC_ITU_T=y CONFIG_CRC32=y # CONFIG_CRC7 is not set -CONFIG_LIBCRC32C=m +# CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1700,18 +1919,25 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1721,26 +1947,71 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_RING_BUFFER_ALLOW_SWAP=y +CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_RING_BUFFER_BENCHMARK is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set -CONFIG_DEBUGGER=y +# CONFIG_PPC_EMULATED_STATS is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set CONFIG_XMON=y CONFIG_XMON_DEFAULT=y CONFIG_XMON_DISASSEMBLY=y +CONFIG_DEBUGGER=y # CONFIG_IRQSTACKS is not set +# CONFIG_VIRQ_DEBUG is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1749,23 +2020,34 @@ CONFIG_XMON_DISASSEMBLY=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_XOR_BLOCKS=y CONFIG_ASYNC_CORE=y CONFIG_ASYNC_MEMCPY=y CONFIG_ASYNC_XOR=y +CONFIG_ASYNC_PQ=y +CONFIG_ASYNC_RAID6_RECOV=y CONFIG_CRYPTO=y # # Crypto core or helper # CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=y # CONFIG_CRYPTO_TEST is not set @@ -1793,14 +2075,20 @@ CONFIG_CRYPTO_CBC=y # CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y @@ -1830,7 +2118,13 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set -- cgit v0.10.2 From 71121d9fcc494453b9311992de220abb47dde3f1 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Tue, 10 Nov 2009 20:11:55 +0100 Subject: ALSA: hda - possible read past array alc88[02]_parse_auto_config() The test of index `i' is after the read - too late - and unsafe: if snd_hda_get_connections() fails in the last iteration a read beyond the array is possible. Signed-off-by: Roel Kluin Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index d1ccb6e..daf6975 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -4684,9 +4684,9 @@ static int alc880_parse_auto_config(struct hda_codec *codec) spec->multiout.dig_out_nid = dig_nid; else { spec->multiout.slave_dig_outs = spec->slave_dig_outs; - spec->slave_dig_outs[i - 1] = dig_nid; - if (i == ARRAY_SIZE(spec->slave_dig_outs) - 1) + if (i >= ARRAY_SIZE(spec->slave_dig_outs) - 1) break; + spec->slave_dig_outs[i - 1] = dig_nid; } } if (spec->autocfg.dig_in_pin) @@ -9813,9 +9813,9 @@ static int alc882_parse_auto_config(struct hda_codec *codec) spec->multiout.dig_out_nid = dig_nid; else { spec->multiout.slave_dig_outs = spec->slave_dig_outs; - spec->slave_dig_outs[i - 1] = dig_nid; - if (i == ARRAY_SIZE(spec->slave_dig_outs) - 1) + if (i >= ARRAY_SIZE(spec->slave_dig_outs) - 1) break; + spec->slave_dig_outs[i - 1] = dig_nid; } } if (spec->autocfg.dig_in_pin) -- cgit v0.10.2 From ea0174a7137c8ca9f130ca681f3a99c872da6778 Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Mon, 12 Oct 2009 21:34:27 -0500 Subject: ext3: retry failed direct IO allocations On a 256M 4k block filesystem, doing this in a loop: dd if=/dev/zero of=test oflag=direct bs=1M count=64 rm -f test eventually leads to spurious ENOSPC: dd: writing `test': No space left on device As with other block allocation callers, it looks like we need to potentially retry the allocations on the initial ENOSPC. A similar patch went into ext4 (commit fbbf69456619de5d251cb9f1df609069178c62d5) Signed-off-by: Eric Sandeen Signed-off-by: Jan Kara diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c index acf1b14..069a163 100644 --- a/fs/ext3/inode.c +++ b/fs/ext3/inode.c @@ -1735,6 +1735,7 @@ static ssize_t ext3_direct_IO(int rw, struct kiocb *iocb, ssize_t ret; int orphan = 0; size_t count = iov_length(iov, nr_segs); + int retries = 0; if (rw == WRITE) { loff_t final_size = offset + count; @@ -1757,9 +1758,12 @@ static ssize_t ext3_direct_IO(int rw, struct kiocb *iocb, } } +retry: ret = blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov, offset, nr_segs, ext3_get_block, NULL); + if (ret == -ENOSPC && ext3_should_retry_alloc(inode->i_sb, &retries)) + goto retry; if (orphan) { int err; -- cgit v0.10.2 From fe8bc91c4c30122b357d197117705cfd4fabaf28 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Fri, 16 Oct 2009 19:26:15 +0200 Subject: ext3: Wait for proper transaction commit on fsync We cannot rely on buffer dirty bits during fsync because pdflush can come before fsync is called and clear dirty bits without forcing a transaction commit. What we do is that we track which transaction has last changed the inode and which transaction last changed allocation and force it to disk on fsync. Signed-off-by: Jan Kara Reviewed-by: Aneesh Kumar K.V diff --git a/fs/ext3/fsync.c b/fs/ext3/fsync.c index 451d166..8209f26 100644 --- a/fs/ext3/fsync.c +++ b/fs/ext3/fsync.c @@ -46,19 +46,21 @@ int ext3_sync_file(struct file * file, struct dentry *dentry, int datasync) { struct inode *inode = dentry->d_inode; + struct ext3_inode_info *ei = EXT3_I(inode); + journal_t *journal = EXT3_SB(inode->i_sb)->s_journal; int ret = 0; + tid_t commit_tid; + + if (inode->i_sb->s_flags & MS_RDONLY) + return 0; J_ASSERT(ext3_journal_current_handle() == NULL); /* - * data=writeback: + * data=writeback,ordered: * The caller's filemap_fdatawrite()/wait will sync the data. - * sync_inode() will sync the metadata - * - * data=ordered: - * The caller's filemap_fdatawrite() will write the data and - * sync_inode() will write the inode if it is dirty. Then the caller's - * filemap_fdatawait() will wait on the pages. + * Metadata is in the journal, we wait for a proper transaction + * to commit here. * * data=journal: * filemap_fdatawrite won't do anything (the buffers are clean). @@ -73,22 +75,16 @@ int ext3_sync_file(struct file * file, struct dentry *dentry, int datasync) goto out; } - if (datasync && !(inode->i_state & I_DIRTY_DATASYNC)) - goto flush; + if (datasync) + commit_tid = atomic_read(&ei->i_datasync_tid); + else + commit_tid = atomic_read(&ei->i_sync_tid); - /* - * The VFS has written the file data. If the inode is unaltered - * then we need not start a commit. - */ - if (inode->i_state & (I_DIRTY_SYNC|I_DIRTY_DATASYNC)) { - struct writeback_control wbc = { - .sync_mode = WB_SYNC_ALL, - .nr_to_write = 0, /* sys_fsync did this */ - }; - ret = sync_inode(inode, &wbc); + if (log_start_commit(journal, commit_tid)) { + log_wait_commit(journal, commit_tid); goto out; } -flush: + /* * In case we didn't commit a transaction, we have to flush * disk caches manually so that data really is on persistent diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c index 069a163..354ed3b 100644 --- a/fs/ext3/inode.c +++ b/fs/ext3/inode.c @@ -699,8 +699,9 @@ static int ext3_splice_branch(handle_t *handle, struct inode *inode, int err = 0; struct ext3_block_alloc_info *block_i; ext3_fsblk_t current_block; + struct ext3_inode_info *ei = EXT3_I(inode); - block_i = EXT3_I(inode)->i_block_alloc_info; + block_i = ei->i_block_alloc_info; /* * If we're splicing into a [td]indirect block (as opposed to the * inode) then we need to get write access to the [td]indirect block @@ -741,6 +742,8 @@ static int ext3_splice_branch(handle_t *handle, struct inode *inode, inode->i_ctime = CURRENT_TIME_SEC; ext3_mark_inode_dirty(handle, inode); + /* ext3_mark_inode_dirty already updated i_sync_tid */ + atomic_set(&ei->i_datasync_tid, handle->h_transaction->t_tid); /* had we spliced it onto indirect block? */ if (where->bh) { @@ -2754,6 +2757,8 @@ struct inode *ext3_iget(struct super_block *sb, unsigned long ino) struct ext3_inode_info *ei; struct buffer_head *bh; struct inode *inode; + journal_t *journal = EXT3_SB(sb)->s_journal; + transaction_t *transaction; long ret; int block; @@ -2831,6 +2836,30 @@ struct inode *ext3_iget(struct super_block *sb, unsigned long ino) ei->i_data[block] = raw_inode->i_block[block]; INIT_LIST_HEAD(&ei->i_orphan); + /* + * Set transaction id's of transactions that have to be committed + * to finish f[data]sync. We set them to currently running transaction + * as we cannot be sure that the inode or some of its metadata isn't + * part of the transaction - the inode could have been reclaimed and + * now it is reread from disk. + */ + if (journal) { + tid_t tid; + + spin_lock(&journal->j_state_lock); + if (journal->j_running_transaction) + transaction = journal->j_running_transaction; + else + transaction = journal->j_committing_transaction; + if (transaction) + tid = transaction->t_tid; + else + tid = journal->j_commit_sequence; + spin_unlock(&journal->j_state_lock); + atomic_set(&ei->i_sync_tid, tid); + atomic_set(&ei->i_datasync_tid, tid); + } + if (inode->i_ino >= EXT3_FIRST_INO(inode->i_sb) + 1 && EXT3_INODE_SIZE(inode->i_sb) > EXT3_GOOD_OLD_INODE_SIZE) { /* @@ -3015,6 +3044,7 @@ again: err = rc; ei->i_state &= ~EXT3_STATE_NEW; + atomic_set(&ei->i_sync_tid, handle->h_transaction->t_tid); out_brelse: brelse (bh); ext3_std_error(inode->i_sb, err); diff --git a/fs/ext3/super.c b/fs/ext3/super.c index 7a520a8..427496c 100644 --- a/fs/ext3/super.c +++ b/fs/ext3/super.c @@ -466,6 +466,8 @@ static struct inode *ext3_alloc_inode(struct super_block *sb) return NULL; ei->i_block_alloc_info = NULL; ei->vfs_inode.i_version = 1; + atomic_set(&ei->i_datasync_tid, 0); + atomic_set(&ei->i_sync_tid, 0); return &ei->vfs_inode; } diff --git a/include/linux/ext3_fs_i.h b/include/linux/ext3_fs_i.h index ca1bfe9..93e7428 100644 --- a/include/linux/ext3_fs_i.h +++ b/include/linux/ext3_fs_i.h @@ -137,6 +137,14 @@ struct ext3_inode_info { * by other means, so we have truncate_mutex. */ struct mutex truncate_mutex; + + /* + * Transactions that contain inode's metadata needed to complete + * fsync and fdatasync, respectively. + */ + atomic_t i_sync_tid; + atomic_t i_datasync_tid; + struct inode vfs_inode; }; -- cgit v0.10.2 From 7b02bec07efe1d6c7d48c786e0c1a38d28fe7245 Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Tue, 10 Nov 2009 17:13:22 +0800 Subject: JBD/JBD2: free j_wbuf if journal init fails. If journal init fails, we need to free j_wbuf. Cc: Andrew Morton Cc: Jan Kara Signed-off-by: Tao Ma Signed-off-by: Jan Kara diff --git a/fs/jbd/journal.c b/fs/jbd/journal.c index bd3c073..49d5cd6 100644 --- a/fs/jbd/journal.c +++ b/fs/jbd/journal.c @@ -756,6 +756,7 @@ journal_t * journal_init_dev(struct block_device *bdev, return journal; out_err: + kfree(journal->j_wbuf); kfree(journal); return NULL; } @@ -820,6 +821,7 @@ journal_t * journal_init_inode (struct inode *inode) return journal; out_err: + kfree(journal->j_wbuf); kfree(journal); return NULL; } diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c index b0ab521..fed85388 100644 --- a/fs/jbd2/journal.c +++ b/fs/jbd2/journal.c @@ -913,6 +913,7 @@ journal_t * jbd2_journal_init_dev(struct block_device *bdev, return journal; out_err: + kfree(journal->j_wbuf); jbd2_stats_proc_exit(journal); kfree(journal); return NULL; @@ -986,6 +987,7 @@ journal_t * jbd2_journal_init_inode (struct inode *inode) return journal; out_err: + kfree(journal->j_wbuf); jbd2_stats_proc_exit(journal); kfree(journal); return NULL; -- cgit v0.10.2 From 6346c93988caa3048bf4d81f9ba3608a7a195aa2 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 10 Nov 2009 21:23:47 -0500 Subject: Btrfs: fix data allocation hint start Sometimes our start allocation hint when we cow a file can be either EXTENT_HOLE or some other such place holder, which is not optimal. So if we find that our em->block_start is one of these special values, check to see where the first block of the inode is stored, and use that as a hint. If that block is also a special value, just fallback on a hint of 0 and let the allocator figure out a good place to put the data. Signed-off-by: Josef Bacik Signed-off-by: Chris Mason diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 78139ef..d8393dd 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -743,8 +743,22 @@ static noinline int cow_file_range(struct inode *inode, em = search_extent_mapping(&BTRFS_I(inode)->extent_tree, start, num_bytes); if (em) { - alloc_hint = em->block_start; - free_extent_map(em); + /* + * if block start isn't an actual block number then find the + * first block in this inode and use that as a hint. If that + * block is also bogus then just don't worry about it. + */ + if (em->block_start >= EXTENT_MAP_LAST_BYTE) { + free_extent_map(em); + em = search_extent_mapping(em_tree, 0, 0); + if (em && em->block_start < EXTENT_MAP_LAST_BYTE) + alloc_hint = em->block_start; + if (em) + free_extent_map(em); + } else { + alloc_hint = em->block_start; + free_extent_map(em); + } } read_unlock(&BTRFS_I(inode)->extent_tree.lock); btrfs_drop_extent_cache(inode, start, start + num_bytes - 1, 0); -- cgit v0.10.2 From 249ac1e55c642c670f47aacdc57629bbbf10a8db Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 10 Nov 2009 21:23:48 -0500 Subject: Btrfs: cleanup transaction starting and fix journal_info usage We use journal_info to tell if we're in a nested transaction to make sure we don't commit the transaction within a nested transaction. We use another method to see if there are any outstanding ioctl trans handles, so if we're starting one do not set current->journal_info, since it will screw with other filesystems. This patch also cleans up the starting stuff so there aren't any magic numbers. Signed-off-by: Josef Bacik Signed-off-by: Chris Mason diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index bca82a4..c207e8c 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -163,8 +163,14 @@ static void wait_current_trans(struct btrfs_root *root) } } +enum btrfs_trans_type { + TRANS_START, + TRANS_JOIN, + TRANS_USERSPACE, +}; + static struct btrfs_trans_handle *start_transaction(struct btrfs_root *root, - int num_blocks, int wait) + int num_blocks, int type) { struct btrfs_trans_handle *h = kmem_cache_alloc(btrfs_trans_handle_cachep, GFP_NOFS); @@ -172,7 +178,8 @@ static struct btrfs_trans_handle *start_transaction(struct btrfs_root *root, mutex_lock(&root->fs_info->trans_mutex); if (!root->fs_info->log_root_recovering && - ((wait == 1 && !root->fs_info->open_ioctl_trans) || wait == 2)) + ((type == TRANS_START && !root->fs_info->open_ioctl_trans) || + type == TRANS_USERSPACE)) wait_current_trans(root); ret = join_transaction(root); BUG_ON(ret); @@ -186,7 +193,7 @@ static struct btrfs_trans_handle *start_transaction(struct btrfs_root *root, h->alloc_exclude_start = 0; h->delayed_ref_updates = 0; - if (!current->journal_info) + if (!current->journal_info && type != TRANS_USERSPACE) current->journal_info = h; root->fs_info->running_transaction->use_count++; @@ -198,18 +205,18 @@ static struct btrfs_trans_handle *start_transaction(struct btrfs_root *root, struct btrfs_trans_handle *btrfs_start_transaction(struct btrfs_root *root, int num_blocks) { - return start_transaction(root, num_blocks, 1); + return start_transaction(root, num_blocks, TRANS_START); } struct btrfs_trans_handle *btrfs_join_transaction(struct btrfs_root *root, int num_blocks) { - return start_transaction(root, num_blocks, 0); + return start_transaction(root, num_blocks, TRANS_JOIN); } struct btrfs_trans_handle *btrfs_start_ioctl_transaction(struct btrfs_root *r, int num_blocks) { - return start_transaction(r, num_blocks, 2); + return start_transaction(r, num_blocks, TRANS_USERSPACE); } /* wait for a transaction commit to be fully complete */ -- cgit v0.10.2 From 01dea1efc23b511d3b58bb94da07ddb6d6db9895 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 10 Nov 2009 21:23:48 -0500 Subject: Btrfs: fix how we set max_size for free space clusters This patch fixes a problem where max_size can be set to 0 even though we filled the cluster properly. We set max_size to 0 if we restart the cluster window, but if the new start entry is big enough to be our new cluster then we could return with a max_size set to 0, which will mean the next time we try to allocate from this cluster it will fail. So set max_extent to the entry's size. Tested this on my box and now we actually allocate from the cluster after we fill it. Thanks, Signed-off-by: Josef Bacik Signed-off-by: Chris Mason diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index 5c2caad..cb2849f 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -1296,7 +1296,7 @@ again: window_start = entry->offset; window_free = entry->bytes; last = entry; - max_extent = 0; + max_extent = entry->bytes; } else { last = next; window_free += next->bytes; -- cgit v0.10.2 From 5df6a9f606bf2ee25ab8031bff124ed883b823be Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 10 Nov 2009 21:23:48 -0500 Subject: Btrfs: fix some metadata enospc issues We weren't reserving metadata space for rename, rmdir and unlink, which could cause problems. Signed-off-by: Josef Bacik Signed-off-by: Chris Mason diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index d8393dd..bb7fd80 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -2488,7 +2488,19 @@ static int btrfs_unlink(struct inode *dir, struct dentry *dentry) root = BTRFS_I(dir)->root; + /* + * 5 items for unlink inode + * 1 for orphan + */ + ret = btrfs_reserve_metadata_space(root, 6); + if (ret) + return ret; + trans = btrfs_start_transaction(root, 1); + if (IS_ERR(trans)) { + btrfs_unreserve_metadata_space(root, 6); + return PTR_ERR(trans); + } btrfs_set_trans_block_group(trans, dir); @@ -2503,6 +2515,7 @@ static int btrfs_unlink(struct inode *dir, struct dentry *dentry) nr = trans->blocks_used; btrfs_end_transaction_throttle(trans, root); + btrfs_unreserve_metadata_space(root, 6); btrfs_btree_balance_dirty(root, nr); return ret; } @@ -2583,7 +2596,16 @@ static int btrfs_rmdir(struct inode *dir, struct dentry *dentry) inode->i_ino == BTRFS_FIRST_FREE_OBJECTID) return -ENOTEMPTY; + ret = btrfs_reserve_metadata_space(root, 5); + if (ret) + return ret; + trans = btrfs_start_transaction(root, 1); + if (IS_ERR(trans)) { + btrfs_unreserve_metadata_space(root, 5); + return PTR_ERR(trans); + } + btrfs_set_trans_block_group(trans, dir); if (unlikely(inode->i_ino == BTRFS_EMPTY_SUBVOL_DIR_OBJECTID)) { @@ -2606,6 +2628,7 @@ static int btrfs_rmdir(struct inode *dir, struct dentry *dentry) out: nr = trans->blocks_used; ret = btrfs_end_transaction_throttle(trans, root); + btrfs_unreserve_metadata_space(root, 5); btrfs_btree_balance_dirty(root, nr); if (ret && !err) @@ -5297,11 +5320,14 @@ static int btrfs_rename(struct inode *old_dir, struct dentry *old_dentry, return -ENOTEMPTY; /* - * 2 items for dir items - * 1 item for orphan entry - * 1 item for ref + * We want to reserve the absolute worst case amount of items. So if + * both inodes are subvols and we need to unlink them then that would + * require 4 item modifications, but if they are both normal inodes it + * would require 5 item modifications, so we'll assume their normal + * inodes. So 5 * 2 is 10, plus 1 for the new link, so 11 total items + * should cover the worst case number of items we'll modify. */ - ret = btrfs_reserve_metadata_space(root, 4); + ret = btrfs_reserve_metadata_space(root, 11); if (ret) return ret; @@ -5417,7 +5443,7 @@ out_fail: if (old_inode->i_ino == BTRFS_FIRST_FREE_OBJECTID) up_read(&root->fs_info->subvol_sem); - btrfs_unreserve_metadata_space(root, 4); + btrfs_unreserve_metadata_space(root, 11); return ret; } -- cgit v0.10.2 From df66916e71231e9f2377cac9c5c1e2d190f9a427 Mon Sep 17 00:00:00 2001 From: Li Dongyang Date: Fri, 6 Nov 2009 14:33:01 +0000 Subject: Btrfs: skip btrfs_release_path in btrfs_update_root and btrfs_del_root We don't need to call btrfs_release_path because btrfs_free_path will do that for us. Signed-off-by: Li Dongyang Signed-off-by: Chris Mason diff --git a/fs/btrfs/root-tree.c b/fs/btrfs/root-tree.c index 9351428..67fa2d2 100644 --- a/fs/btrfs/root-tree.c +++ b/fs/btrfs/root-tree.c @@ -159,7 +159,6 @@ int btrfs_update_root(struct btrfs_trans_handle *trans, struct btrfs_root write_extent_buffer(l, item, ptr, sizeof(*item)); btrfs_mark_buffer_dirty(path->nodes[0]); out: - btrfs_release_path(root, path); btrfs_free_path(path); return ret; } @@ -332,7 +331,6 @@ int btrfs_del_root(struct btrfs_trans_handle *trans, struct btrfs_root *root, BUG_ON(refs != 0); ret = btrfs_del_item(trans, root, path); out: - btrfs_release_path(root, path); btrfs_free_path(path); return ret; } -- cgit v0.10.2 From 4eb3991c5def39bcf553c14ebe2618fcb47b627f Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 10 Nov 2009 09:01:43 +0000 Subject: Btrfs: avoid null deref in unpin_extent_cache() I re-orderred the checks to avoid dereferencing "em" if it was null. Found by smatch static checker. Signed-off-by: Dan Carpenter Signed-off-by: Chris Mason diff --git a/fs/btrfs/extent_map.c b/fs/btrfs/extent_map.c index 2c726b7..ccbdcb5 100644 --- a/fs/btrfs/extent_map.c +++ b/fs/btrfs/extent_map.c @@ -208,7 +208,7 @@ int unpin_extent_cache(struct extent_map_tree *tree, u64 start, u64 len) write_lock(&tree->lock); em = lookup_extent_mapping(tree, start, len); - WARN_ON(em->start != start || !em); + WARN_ON(!em || em->start != start); if (!em) goto out; -- cgit v0.10.2 From ccf0e72537a9f68611ca575121afd08e2b4d0fb0 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 10 Nov 2009 21:23:48 -0500 Subject: Btrfs: find ideal block group for caching This patch changes a few things. Hopefully the comments are helpfull, but I'll try and be as verbose here. Problem: My fedora box was taking 1 minute and 21 seconds to boot with btrfs as root. Part of this problem was we pick the first block group we can find and start caching it, even if it may not have enough free space. The other problem is we only search for cached block groups the first time around, which we won't find any cached block groups because this is a newly mounted fs, so we end up caching several block groups during bootup, which with alot of fragmentation takes around 30-45 seconds to complete, which bogs down the system. So Solution: 1) Don't cache block groups willy-nilly at first. Instead try and figure out which block group has the most free, and therefore will take the least amount of time to cache. 2) Don't be so picky about cached block groups. The other problem is once we've filled up a cluster, if the block group isn't finished caching the next time we try and do the allocation we'll completely ignore the cluster and start searching from the beginning of the space, which makes us cache more block groups, which slows us down even more. So instead of skipping block groups that are not finished caching when we have a hint, only skip the block group if it hasn't started caching yet. There is one other tweak in here. Before if we allocated a chunk and still couldn't find new space, we'd end up switching the space info to force another chunk allocation. This could make us end up with way too many chunks, so keep track of this particular case. With this patch and my previous cluster fixes my fedora box now boots in 43 seconds, and according to the bootchart is not held up by our block group caching at all. Signed-off-by: Josef Bacik Signed-off-by: Chris Mason diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index c56f916..2a4cdce 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -4101,7 +4101,7 @@ wait_block_group_cache_done(struct btrfs_block_group_cache *cache) } enum btrfs_loop_type { - LOOP_CACHED_ONLY = 0, + LOOP_FIND_IDEAL = 0, LOOP_CACHING_NOWAIT = 1, LOOP_CACHING_WAIT = 2, LOOP_ALLOC_CHUNK = 3, @@ -4130,12 +4130,15 @@ static noinline int find_free_extent(struct btrfs_trans_handle *trans, struct btrfs_block_group_cache *block_group = NULL; int empty_cluster = 2 * 1024 * 1024; int allowed_chunk_alloc = 0; + int done_chunk_alloc = 0; struct btrfs_space_info *space_info; int last_ptr_loop = 0; int loop = 0; bool found_uncached_bg = false; bool failed_cluster_refill = false; bool failed_alloc = false; + u64 ideal_cache_percent = 0; + u64 ideal_cache_offset = 0; WARN_ON(num_bytes < root->sectorsize); btrfs_set_key_type(ins, BTRFS_EXTENT_ITEM_KEY); @@ -4171,14 +4174,19 @@ static noinline int find_free_extent(struct btrfs_trans_handle *trans, empty_cluster = 0; if (search_start == hint_byte) { +ideal_cache: block_group = btrfs_lookup_block_group(root->fs_info, search_start); /* * we don't want to use the block group if it doesn't match our * allocation bits, or if its not cached. + * + * However if we are re-searching with an ideal block group + * picked out then we don't care that the block group is cached. */ if (block_group && block_group_bits(block_group, data) && - block_group_cache_done(block_group)) { + (block_group->cached != BTRFS_CACHE_NO || + search_start == ideal_cache_offset)) { down_read(&space_info->groups_sem); if (list_empty(&block_group->list) || block_group->ro) { @@ -4190,13 +4198,13 @@ static noinline int find_free_extent(struct btrfs_trans_handle *trans, */ btrfs_put_block_group(block_group); up_read(&space_info->groups_sem); - } else + } else { goto have_block_group; + } } else if (block_group) { btrfs_put_block_group(block_group); } } - search: down_read(&space_info->groups_sem); list_for_each_entry(block_group, &space_info->block_groups, list) { @@ -4208,28 +4216,45 @@ search: have_block_group: if (unlikely(block_group->cached == BTRFS_CACHE_NO)) { + u64 free_percent; + + free_percent = btrfs_block_group_used(&block_group->item); + free_percent *= 100; + free_percent = div64_u64(free_percent, + block_group->key.offset); + free_percent = 100 - free_percent; + if (free_percent > ideal_cache_percent && + likely(!block_group->ro)) { + ideal_cache_offset = block_group->key.objectid; + ideal_cache_percent = free_percent; + } + /* - * we want to start caching kthreads, but not too many - * right off the bat so we don't overwhelm the system, - * so only start them if there are less than 2 and we're - * in the initial allocation phase. + * We only want to start kthread caching if we are at + * the point where we will wait for caching to make + * progress, or if our ideal search is over and we've + * found somebody to start caching. */ if (loop > LOOP_CACHING_NOWAIT || - atomic_read(&space_info->caching_threads) < 2) { + (loop > LOOP_FIND_IDEAL && + atomic_read(&space_info->caching_threads) < 2)) { ret = cache_block_group(block_group); BUG_ON(ret); } - } - - cached = block_group_cache_done(block_group); - if (unlikely(!cached)) { found_uncached_bg = true; - /* if we only want cached bgs, loop */ - if (loop == LOOP_CACHED_ONLY) + /* + * If loop is set for cached only, try the next block + * group. + */ + if (loop == LOOP_FIND_IDEAL) goto loop; } + cached = block_group_cache_done(block_group); + if (unlikely(!cached)) + found_uncached_bg = true; + if (unlikely(block_group->ro)) goto loop; @@ -4409,9 +4434,11 @@ loop: } up_read(&space_info->groups_sem); - /* LOOP_CACHED_ONLY, only search fully cached block groups - * LOOP_CACHING_NOWAIT, search partially cached block groups, but - * dont wait foR them to finish caching + /* LOOP_FIND_IDEAL, only search caching/cached bg's, and don't wait for + * for them to make caching progress. Also + * determine the best possible bg to cache + * LOOP_CACHING_NOWAIT, search partially cached block groups, kicking + * caching kthreads as we move along * LOOP_CACHING_WAIT, search everything, and wait if our bg is caching * LOOP_ALLOC_CHUNK, force a chunk allocation and try again * LOOP_NO_EMPTY_SIZE, set empty_size and empty_cluster to 0 and try @@ -4420,12 +4447,47 @@ loop: if (!ins->objectid && loop < LOOP_NO_EMPTY_SIZE && (found_uncached_bg || empty_size || empty_cluster || allowed_chunk_alloc)) { - if (found_uncached_bg) { + if (loop == LOOP_FIND_IDEAL && found_uncached_bg) { found_uncached_bg = false; - if (loop < LOOP_CACHING_WAIT) { - loop++; + loop++; + if (!ideal_cache_percent && + atomic_read(&space_info->caching_threads)) goto search; - } + + /* + * 1 of the following 2 things have happened so far + * + * 1) We found an ideal block group for caching that + * is mostly full and will cache quickly, so we might + * as well wait for it. + * + * 2) We searched for cached only and we didn't find + * anything, and we didn't start any caching kthreads + * either, so chances are we will loop through and + * start a couple caching kthreads, and then come back + * around and just wait for them. This will be slower + * because we will have 2 caching kthreads reading at + * the same time when we could have just started one + * and waited for it to get far enough to give us an + * allocation, so go ahead and go to the wait caching + * loop. + */ + loop = LOOP_CACHING_WAIT; + search_start = ideal_cache_offset; + ideal_cache_percent = 0; + goto ideal_cache; + } else if (loop == LOOP_FIND_IDEAL) { + /* + * Didn't find a uncached bg, wait on anything we find + * next. + */ + loop = LOOP_CACHING_WAIT; + goto search; + } + + if (loop < LOOP_CACHING_WAIT) { + loop++; + goto search; } if (loop == LOOP_ALLOC_CHUNK) { @@ -4437,7 +4499,8 @@ loop: ret = do_chunk_alloc(trans, root, num_bytes + 2 * 1024 * 1024, data, 1); allowed_chunk_alloc = 0; - } else { + done_chunk_alloc = 1; + } else if (!done_chunk_alloc) { space_info->force_alloc = 1; } -- cgit v0.10.2 From f5a84ee3cdd88d96b7bcede10af58598ad8d52a7 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 10 Nov 2009 21:23:48 -0500 Subject: Btrfs: fallback on uncompressed io if compressed io fails Currently compressed IO does not deal with not having its entire extent able to be allocated. So if we have enough free space to allocate for the extent, but its not contiguous, it will fail spectacularly. This patch fixes this by falling back on uncompressed IO which lets us spread the delalloc extent across multiple extents. I tested this by making us randomly think the reservation had failed to make it fallback on the uncompressed io way and it seemed to work fine. Thanks, Signed-off-by: Josef Bacik Signed-off-by: Chris Mason diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index bb7fd80..d3d7d46 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -538,7 +538,7 @@ static noinline int submit_compressed_extents(struct inode *inode, struct btrfs_root *root = BTRFS_I(inode)->root; struct extent_map_tree *em_tree = &BTRFS_I(inode)->extent_tree; struct extent_io_tree *io_tree; - int ret; + int ret = 0; if (list_empty(&async_cow->extents)) return 0; @@ -552,6 +552,7 @@ static noinline int submit_compressed_extents(struct inode *inode, io_tree = &BTRFS_I(inode)->io_tree; +retry: /* did the compression code fall back to uncompressed IO? */ if (!async_extent->pages) { int page_started = 0; @@ -562,11 +563,11 @@ static noinline int submit_compressed_extents(struct inode *inode, async_extent->ram_size - 1, GFP_NOFS); /* allocate blocks */ - cow_file_range(inode, async_cow->locked_page, - async_extent->start, - async_extent->start + - async_extent->ram_size - 1, - &page_started, &nr_written, 0); + ret = cow_file_range(inode, async_cow->locked_page, + async_extent->start, + async_extent->start + + async_extent->ram_size - 1, + &page_started, &nr_written, 0); /* * if page_started, cow_file_range inserted an @@ -574,7 +575,7 @@ static noinline int submit_compressed_extents(struct inode *inode, * and IO for us. Otherwise, we need to submit * all those pages down to the drive. */ - if (!page_started) + if (!page_started && !ret) extent_write_locked_range(io_tree, inode, async_extent->start, async_extent->start + @@ -602,7 +603,21 @@ static noinline int submit_compressed_extents(struct inode *inode, async_extent->compressed_size, 0, alloc_hint, (u64)-1, &ins, 1); - BUG_ON(ret); + if (ret) { + int i; + for (i = 0; i < async_extent->nr_pages; i++) { + WARN_ON(async_extent->pages[i]->mapping); + page_cache_release(async_extent->pages[i]); + } + kfree(async_extent->pages); + async_extent->nr_pages = 0; + async_extent->pages = NULL; + unlock_extent(io_tree, async_extent->start, + async_extent->start + + async_extent->ram_size - 1, GFP_NOFS); + goto retry; + } + em = alloc_extent_map(GFP_NOFS); em->start = async_extent->start; em->len = async_extent->ram_size; -- cgit v0.10.2 From 33b258086441dd07e00133c79fcd8cbc6a76d737 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Wed, 11 Nov 2009 10:16:57 -0500 Subject: Btrfs: allow more metadata chunk preallocation On an FS where all of the space has not been allocated into chunks yet, the enospc can return enospc just because the existing metadata chunks are full. We get around this by allowing more metadata chunks to be allocated up to a certain limit, and finding the right limit is a little fuzzy. The problem is the reservations for delalloc would preallocate way too much of the FS as metadata. We need to start saying no and just force some IO to happen. But we also need to let a reasonable amount of the FS become metadata. This bumps the hard limit up, later releases will have a better system. Signed-off-by: Chris Mason diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 2a4cdce..8d1fd6d 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -2976,10 +2976,10 @@ static int maybe_allocate_chunk(struct btrfs_root *root, free_space = btrfs_super_total_bytes(disk_super); /* - * we allow the metadata to grow to a max of either 5gb or 5% of the + * we allow the metadata to grow to a max of either 10gb or 5% of the * space in the volume. */ - min_metadata = min((u64)5 * 1024 * 1024 * 1024, + min_metadata = min((u64)10 * 1024 * 1024 * 1024, div64_u64(free_space * 5, 100)); if (info->total_bytes >= min_metadata) { spin_unlock(&info->lock); -- cgit v0.10.2 From a6dbd429d8dd3382bbd9594b8d2ec74843a260d9 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Wed, 11 Nov 2009 15:53:34 -0500 Subject: Btrfs: fix panic when trying to destroy a newly allocated There is a problem where iget5_locked will look for an inode, not find it, and then subsequently try to allocate it. Another CPU will have raced in and allocated the inode instead, so when iget5_locked gets the inode spin lock again and does a search, it finds the new inode. So it goes ahead and calls destroy_inode on the inode it just allocated. The problem is we don't set BTRFS_I(inode)->root until the new inode is completely initialized. This patch makes us set root to NULL when alloc'ing a new inode, so when we get to btrfs_destroy_inode and we see that root is NULL we can just free up the memory and continue on. This fixes the panic http://www.kerneloops.org/submitresult.php?number=812690 Thanks, Signed-off-by: Josef Bacik Signed-off-by: Chris Mason diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index d3d7d46..ee92801 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -5180,6 +5180,7 @@ struct inode *btrfs_alloc_inode(struct super_block *sb) ei->logged_trans = 0; ei->outstanding_extents = 0; ei->reserved_extents = 0; + ei->root = NULL; spin_lock_init(&ei->accounting_lock); btrfs_ordered_inode_tree_init(&ei->ordered_tree); INIT_LIST_HEAD(&ei->i_orphan); @@ -5196,6 +5197,14 @@ void btrfs_destroy_inode(struct inode *inode) WARN_ON(inode->i_data.nrpages); /* + * This can happen where we create an inode, but somebody else also + * created the same inode and we need to destroy the one we already + * created. + */ + if (!root) + goto free; + + /* * Make sure we're properly removed from the ordered operation * lists. */ @@ -5230,6 +5239,7 @@ void btrfs_destroy_inode(struct inode *inode) } inode_tree_del(inode); btrfs_drop_extent_cache(inode, 0, (u64)-1, 0); +free: kmem_cache_free(btrfs_inode_cachep, BTRFS_I(inode)); } -- cgit v0.10.2 From 404291ac9e72d118fcadeb939a69b2caa0a0e9ca Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 11 Nov 2009 13:32:29 -0800 Subject: btusb bluetooth driver: wait for 'waker' work too before closing Rafael debugged a resume-time hang (with oopses in workqueue handling) on his laptop that was due to the 'waker' workqueue entry being disconnected and then released without the workqueue entry having been synchronized. Several people were involved, with Oleg Nesterov doing a debugging patch showing what workqueue entry was corrupt etc. This was a regression introduced by commit 7bee549e19 ("Bluetooth: Add USB autosuspend support to btusb driver") as Rafael points out (not actually bisected, but it became clear once the bug was found). Tested-and-reported-by: Rafael J. Wysocki Acked-by: Oliver Neukum Cc: Oleg Nesterov Cc: Tejun Heo Cc: Marcel Holtmann Signed-off-by: Linus Torvalds diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 7ba91aa..2fb3802 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -591,6 +591,7 @@ static int btusb_close(struct hci_dev *hdev) return 0; cancel_work_sync(&data->work); + cancel_work_sync(&data->waker); clear_bit(BTUSB_ISOC_RUNNING, &data->flags); clear_bit(BTUSB_BULK_RUNNING, &data->flags); -- cgit v0.10.2