From d792c1006fe92448217b71513d3955868358271d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= Date: Fri, 13 Nov 2009 13:56:33 -0800 Subject: tcp: provide more information on the tcp receive_queue bugs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The addition of rcv_nxt allows to discern whether the skb was out of place or tp->copied. Also catch fancy combination of flags if necessary (sadly we might miss the actual causer flags as it might have already returned). Btw, we perhaps would want to forward copied_seq in somewhere or otherwise we might have some nice loop with WARN stuff within but where to do that safely I don't know at this stage until more is known (but it is not made significantly worse by this patch). Signed-off-by: Ilpo Järvinen Signed-off-by: David S. Miller diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 98440ad..f1813bc 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -1183,7 +1183,9 @@ void tcp_cleanup_rbuf(struct sock *sk, int copied) #if TCP_DEBUG struct sk_buff *skb = skb_peek(&sk->sk_receive_queue); - WARN_ON(skb && !before(tp->copied_seq, TCP_SKB_CB(skb)->end_seq)); + WARN(skb && !before(tp->copied_seq, TCP_SKB_CB(skb)->end_seq), + KERN_INFO "cleanup rbuf bug: copied %X seq %X rcvnxt %X\n", + tp->copied_seq, TCP_SKB_CB(skb)->end_seq, tp->rcv_nxt); #endif if (inet_csk_ack_scheduled(sk)) { @@ -1430,11 +1432,13 @@ int tcp_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg, /* Now that we have two receive queues this * shouldn't happen. */ - if (before(*seq, TCP_SKB_CB(skb)->seq)) { - printk(KERN_INFO "recvmsg bug: copied %X " - "seq %X\n", *seq, TCP_SKB_CB(skb)->seq); + if (WARN(before(*seq, TCP_SKB_CB(skb)->seq), + KERN_INFO "recvmsg bug: copied %X " + "seq %X rcvnxt %X fl %X\n", *seq, + TCP_SKB_CB(skb)->seq, tp->rcv_nxt, + flags)) break; - } + offset = *seq - TCP_SKB_CB(skb)->seq; if (tcp_hdr(skb)->syn) offset--; @@ -1443,8 +1447,9 @@ int tcp_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg, if (tcp_hdr(skb)->fin) goto found_fin_ok; WARN(!(flags & MSG_PEEK), KERN_INFO "recvmsg bug 2: " - "copied %X seq %X\n", *seq, - TCP_SKB_CB(skb)->seq); + "copied %X seq %X rcvnxt %X fl %X\n", + *seq, TCP_SKB_CB(skb)->seq, + tp->rcv_nxt, flags); } /* Well, if we have backlog, try to process it now yet. */ -- cgit v0.10.2 From 8cc3174ef98fbb317d9ee18e20102908ff7faffc Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Fri, 13 Nov 2009 16:56:13 -0500 Subject: Revert "libipw: initiate cfg80211 API conversion" This reverts commit b8ecd988b1670035a05035c553c08331214d6603. Due to poor API call balancing by me, this commit not only broke ipw2200 if it can't find it's firmware, it broke ipw2100 basically anytime you removed the module. At this point in the cycle, let's just put it back to a sane state and try again next time... Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c index 240cff1..6e2fc0c 100644 --- a/drivers/net/wireless/ipw2x00/ipw2100.c +++ b/drivers/net/wireless/ipw2x00/ipw2100.c @@ -6029,7 +6029,7 @@ static struct net_device *ipw2100_alloc_device(struct pci_dev *pci_dev, struct ipw2100_priv *priv; struct net_device *dev; - dev = alloc_ieee80211(sizeof(struct ipw2100_priv), 0); + dev = alloc_ieee80211(sizeof(struct ipw2100_priv)); if (!dev) return NULL; priv = libipw_priv(dev); @@ -6342,7 +6342,7 @@ static int ipw2100_pci_init_one(struct pci_dev *pci_dev, sysfs_remove_group(&pci_dev->dev.kobj, &ipw2100_attribute_group); - free_ieee80211(dev, 0); + free_ieee80211(dev); pci_set_drvdata(pci_dev, NULL); } @@ -6400,7 +6400,7 @@ static void __devexit ipw2100_pci_remove_one(struct pci_dev *pci_dev) if (dev->base_addr) iounmap((void __iomem *)dev->base_addr); - free_ieee80211(dev, 0); + free_ieee80211(dev); } pci_release_regions(pci_dev); diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c index 8d58e6e..0d30a9e 100644 --- a/drivers/net/wireless/ipw2x00/ipw2200.c +++ b/drivers/net/wireless/ipw2x00/ipw2200.c @@ -103,25 +103,6 @@ static int antenna = CFG_SYS_ANTENNA_BOTH; static int rtap_iface = 0; /* def: 0 -- do not create rtap interface */ #endif -static struct ieee80211_rate ipw2200_rates[] = { - { .bitrate = 10 }, - { .bitrate = 20, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, - { .bitrate = 55, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, - { .bitrate = 110, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, - { .bitrate = 60 }, - { .bitrate = 90 }, - { .bitrate = 120 }, - { .bitrate = 180 }, - { .bitrate = 240 }, - { .bitrate = 360 }, - { .bitrate = 480 }, - { .bitrate = 540 } -}; - -#define ipw2200_a_rates (ipw2200_rates + 4) -#define ipw2200_num_a_rates 8 -#define ipw2200_bg_rates (ipw2200_rates + 0) -#define ipw2200_num_bg_rates 12 #ifdef CONFIG_IPW2200_QOS static int qos_enable = 0; @@ -8673,6 +8654,24 @@ static int ipw_sw_reset(struct ipw_priv *priv, int option) * */ +static int ipw_wx_get_name(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw_priv *priv = libipw_priv(dev); + mutex_lock(&priv->mutex); + if (priv->status & STATUS_RF_KILL_MASK) + strcpy(wrqu->name, "radio off"); + else if (!(priv->status & STATUS_ASSOCIATED)) + strcpy(wrqu->name, "unassociated"); + else + snprintf(wrqu->name, IFNAMSIZ, "IEEE 802.11%c", + ipw_modes[priv->assoc_request.ieee_mode]); + IPW_DEBUG_WX("Name: %s\n", wrqu->name); + mutex_unlock(&priv->mutex); + return 0; +} + static int ipw_set_channel(struct ipw_priv *priv, u8 channel) { if (channel == 0) { @@ -9972,7 +9971,7 @@ static int ipw_wx_sw_reset(struct net_device *dev, /* Rebase the WE IOCTLs to zero for the handler array */ #define IW_IOCTL(x) [(x)-SIOCSIWCOMMIT] static iw_handler ipw_wx_handlers[] = { - IW_IOCTL(SIOCGIWNAME) = (iw_handler) cfg80211_wext_giwname, + IW_IOCTL(SIOCGIWNAME) = ipw_wx_get_name, IW_IOCTL(SIOCSIWFREQ) = ipw_wx_set_freq, IW_IOCTL(SIOCGIWFREQ) = ipw_wx_get_freq, IW_IOCTL(SIOCSIWMODE) = ipw_wx_set_mode, @@ -11416,100 +11415,16 @@ static void ipw_bg_down(struct work_struct *work) /* Called by register_netdev() */ static int ipw_net_init(struct net_device *dev) { - int i, rc = 0; struct ipw_priv *priv = libipw_priv(dev); - const struct libipw_geo *geo = libipw_get_geo(priv->ieee); - struct wireless_dev *wdev = &priv->ieee->wdev; mutex_lock(&priv->mutex); if (ipw_up(priv)) { - rc = -EIO; - goto out; - } - - memcpy(wdev->wiphy->perm_addr, priv->mac_addr, ETH_ALEN); - - /* fill-out priv->ieee->bg_band */ - if (geo->bg_channels) { - struct ieee80211_supported_band *bg_band = &priv->ieee->bg_band; - - bg_band->band = IEEE80211_BAND_2GHZ; - bg_band->n_channels = geo->bg_channels; - bg_band->channels = - kzalloc(geo->bg_channels * - sizeof(struct ieee80211_channel), GFP_KERNEL); - /* translate geo->bg to bg_band.channels */ - for (i = 0; i < geo->bg_channels; i++) { - bg_band->channels[i].band = IEEE80211_BAND_2GHZ; - bg_band->channels[i].center_freq = geo->bg[i].freq; - bg_band->channels[i].hw_value = geo->bg[i].channel; - bg_band->channels[i].max_power = geo->bg[i].max_power; - if (geo->bg[i].flags & LIBIPW_CH_PASSIVE_ONLY) - bg_band->channels[i].flags |= - IEEE80211_CHAN_PASSIVE_SCAN; - if (geo->bg[i].flags & LIBIPW_CH_NO_IBSS) - bg_band->channels[i].flags |= - IEEE80211_CHAN_NO_IBSS; - if (geo->bg[i].flags & LIBIPW_CH_RADAR_DETECT) - bg_band->channels[i].flags |= - IEEE80211_CHAN_RADAR; - /* No equivalent for LIBIPW_CH_80211H_RULES, - LIBIPW_CH_UNIFORM_SPREADING, or - LIBIPW_CH_B_ONLY... */ - } - /* point at bitrate info */ - bg_band->bitrates = ipw2200_bg_rates; - bg_band->n_bitrates = ipw2200_num_bg_rates; - - wdev->wiphy->bands[IEEE80211_BAND_2GHZ] = bg_band; - } - - /* fill-out priv->ieee->a_band */ - if (geo->a_channels) { - struct ieee80211_supported_band *a_band = &priv->ieee->a_band; - - a_band->band = IEEE80211_BAND_5GHZ; - a_band->n_channels = geo->a_channels; - a_band->channels = - kzalloc(geo->a_channels * - sizeof(struct ieee80211_channel), GFP_KERNEL); - /* translate geo->bg to a_band.channels */ - for (i = 0; i < geo->a_channels; i++) { - a_band->channels[i].band = IEEE80211_BAND_2GHZ; - a_band->channels[i].center_freq = geo->a[i].freq; - a_band->channels[i].hw_value = geo->a[i].channel; - a_band->channels[i].max_power = geo->a[i].max_power; - if (geo->a[i].flags & LIBIPW_CH_PASSIVE_ONLY) - a_band->channels[i].flags |= - IEEE80211_CHAN_PASSIVE_SCAN; - if (geo->a[i].flags & LIBIPW_CH_NO_IBSS) - a_band->channels[i].flags |= - IEEE80211_CHAN_NO_IBSS; - if (geo->a[i].flags & LIBIPW_CH_RADAR_DETECT) - a_band->channels[i].flags |= - IEEE80211_CHAN_RADAR; - /* No equivalent for LIBIPW_CH_80211H_RULES, - LIBIPW_CH_UNIFORM_SPREADING, or - LIBIPW_CH_B_ONLY... */ - } - /* point at bitrate info */ - a_band->bitrates = ipw2200_a_rates; - a_band->n_bitrates = ipw2200_num_a_rates; - - wdev->wiphy->bands[IEEE80211_BAND_5GHZ] = a_band; - } - - set_wiphy_dev(wdev->wiphy, &priv->pci_dev->dev); - - /* With that information in place, we can now register the wiphy... */ - if (wiphy_register(wdev->wiphy)) { - rc = -EIO; - goto out; + mutex_unlock(&priv->mutex); + return -EIO; } -out: mutex_unlock(&priv->mutex); - return rc; + return 0; } /* PCI driver stuff */ @@ -11640,7 +11555,7 @@ static int ipw_prom_alloc(struct ipw_priv *priv) if (priv->prom_net_dev) return -EPERM; - priv->prom_net_dev = alloc_ieee80211(sizeof(struct ipw_prom_priv), 1); + priv->prom_net_dev = alloc_ieee80211(sizeof(struct ipw_prom_priv)); if (priv->prom_net_dev == NULL) return -ENOMEM; @@ -11659,7 +11574,7 @@ static int ipw_prom_alloc(struct ipw_priv *priv) rc = register_netdev(priv->prom_net_dev); if (rc) { - free_ieee80211(priv->prom_net_dev, 1); + free_ieee80211(priv->prom_net_dev); priv->prom_net_dev = NULL; return rc; } @@ -11673,7 +11588,7 @@ static void ipw_prom_free(struct ipw_priv *priv) return; unregister_netdev(priv->prom_net_dev); - free_ieee80211(priv->prom_net_dev, 1); + free_ieee80211(priv->prom_net_dev); priv->prom_net_dev = NULL; } @@ -11701,7 +11616,7 @@ static int __devinit ipw_pci_probe(struct pci_dev *pdev, struct ipw_priv *priv; int i; - net_dev = alloc_ieee80211(sizeof(struct ipw_priv), 0); + net_dev = alloc_ieee80211(sizeof(struct ipw_priv)); if (net_dev == NULL) { err = -ENOMEM; goto out; @@ -11849,7 +11764,7 @@ static int __devinit ipw_pci_probe(struct pci_dev *pdev, pci_disable_device(pdev); pci_set_drvdata(pdev, NULL); out_free_ieee80211: - free_ieee80211(priv->net_dev, 0); + free_ieee80211(priv->net_dev); out: return err; } @@ -11916,7 +11831,7 @@ static void __devexit ipw_pci_remove(struct pci_dev *pdev) pci_release_regions(pdev); pci_disable_device(pdev); pci_set_drvdata(pdev, NULL); - free_ieee80211(priv->net_dev, 0); + free_ieee80211(priv->net_dev); free_firmware(); } diff --git a/drivers/net/wireless/ipw2x00/libipw.h b/drivers/net/wireless/ipw2x00/libipw.h index bf45391..1e334ff 100644 --- a/drivers/net/wireless/ipw2x00/libipw.h +++ b/drivers/net/wireless/ipw2x00/libipw.h @@ -31,7 +31,6 @@ #include #include -#include #define LIBIPW_VERSION "git-1.1.13" @@ -784,15 +783,12 @@ struct libipw_geo { struct libipw_device { struct net_device *dev; - struct wireless_dev wdev; struct libipw_security sec; /* Bookkeeping structures */ struct libipw_stats ieee_stats; struct libipw_geo geo; - struct ieee80211_supported_band bg_band; - struct ieee80211_supported_band a_band; /* Probe / Beacon management */ struct list_head network_free_list; @@ -1018,8 +1014,8 @@ static inline int libipw_is_cck_rate(u8 rate) } /* ieee80211.c */ -extern void free_ieee80211(struct net_device *dev, int monitor); -extern struct net_device *alloc_ieee80211(int sizeof_priv, int monitor); +extern void free_ieee80211(struct net_device *dev); +extern struct net_device *alloc_ieee80211(int sizeof_priv); extern int libipw_change_mtu(struct net_device *dev, int new_mtu); extern void libipw_networks_age(struct libipw_device *ieee, diff --git a/drivers/net/wireless/ipw2x00/libipw_module.c b/drivers/net/wireless/ipw2x00/libipw_module.c index a0e9f6a..eb2b608 100644 --- a/drivers/net/wireless/ipw2x00/libipw_module.c +++ b/drivers/net/wireless/ipw2x00/libipw_module.c @@ -62,9 +62,6 @@ MODULE_DESCRIPTION(DRV_DESCRIPTION); MODULE_AUTHOR(DRV_COPYRIGHT); MODULE_LICENSE("GPL"); -struct cfg80211_ops libipw_config_ops = { }; -void *libipw_wiphy_privid = &libipw_wiphy_privid; - static int libipw_networks_allocate(struct libipw_device *ieee) { if (ieee->networks) @@ -143,7 +140,7 @@ int libipw_change_mtu(struct net_device *dev, int new_mtu) } EXPORT_SYMBOL(libipw_change_mtu); -struct net_device *alloc_ieee80211(int sizeof_priv, int monitor) +struct net_device *alloc_ieee80211(int sizeof_priv) { struct libipw_device *ieee; struct net_device *dev; @@ -160,31 +157,10 @@ struct net_device *alloc_ieee80211(int sizeof_priv, int monitor) ieee->dev = dev; - if (!monitor) { - ieee->wdev.wiphy = wiphy_new(&libipw_config_ops, 0); - if (!ieee->wdev.wiphy) { - LIBIPW_ERROR("Unable to allocate wiphy.\n"); - goto failed_free_netdev; - } - - ieee->dev->ieee80211_ptr = &ieee->wdev; - ieee->wdev.iftype = NL80211_IFTYPE_STATION; - - /* Fill-out wiphy structure bits we know... Not enough info - here to call set_wiphy_dev or set MAC address or channel info - -- have to do that in ->ndo_init... */ - ieee->wdev.wiphy->privid = libipw_wiphy_privid; - - ieee->wdev.wiphy->max_scan_ssids = 1; - ieee->wdev.wiphy->max_scan_ie_len = 0; - ieee->wdev.wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) - | BIT(NL80211_IFTYPE_ADHOC); - } - err = libipw_networks_allocate(ieee); if (err) { LIBIPW_ERROR("Unable to allocate beacon storage: %d\n", err); - goto failed_free_wiphy; + goto failed_free_netdev; } libipw_networks_initialize(ieee); @@ -217,31 +193,19 @@ struct net_device *alloc_ieee80211(int sizeof_priv, int monitor) return dev; -failed_free_wiphy: - if (!monitor) - wiphy_free(ieee->wdev.wiphy); failed_free_netdev: free_netdev(dev); failed: return NULL; } -void free_ieee80211(struct net_device *dev, int monitor) +void free_ieee80211(struct net_device *dev) { struct libipw_device *ieee = netdev_priv(dev); lib80211_crypt_info_free(&ieee->crypt_info); libipw_networks_free(ieee); - - /* free cfg80211 resources */ - if (!monitor) { - wiphy_unregister(ieee->wdev.wiphy); - kfree(ieee->a_band.channels); - kfree(ieee->bg_band.channels); - wiphy_free(ieee->wdev.wiphy); - } - free_netdev(dev); } -- cgit v0.10.2 From 4a7bd3ec7aa305048b0e4791d056c52ac1f43ddf Mon Sep 17 00:00:00 2001 From: Gertjan van Wingerde Date: Sun, 8 Nov 2009 12:31:20 +0100 Subject: rt2x00: Update MAINTAINERS Add myself to the list of maintainers for the rt2x00 driver. Signed-off-by: Gertjan van Wingerde Signed-off-by: John W. Linville diff --git a/MAINTAINERS b/MAINTAINERS index b37e0cd..223d697 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4281,6 +4281,7 @@ F: drivers/video/aty/aty128fb.c RALINK RT2X00 WIRELESS LAN DRIVER P: rt2x00 project M: Ivo van Doorn +M: Gertjan van Wingerde L: linux-wireless@vger.kernel.org L: users@rt2x00.serialmonkey.com (moderated for non-subscribers) W: http://rt2x00.serialmonkey.com/ -- cgit v0.10.2 From 21d6c270f11c7d0ab5aafa48a6e79ba514f4e5e7 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Wed, 11 Nov 2009 18:02:29 -0600 Subject: p54usb: Remove DMA buffer from stack On 2.6.32-rc6 from wireless-testing, the following warning is emitted: ------------[ cut here ]------------ WARNING: at lib/dma-debug.c:860 check_for_stack+0xaa/0xe0() Hardware name: HP Pavilion dv2700 Notebook PC ehci_hcd 0000:00:02.1: DMA-API: device driver maps memory fromstack [addr=ffff8800b6e2bca8] Modules linked in: Pid: 16378, comm: modprobe Not tainted 2.6.32-rc6-wl #244 Call Trace: [] warn_slowpath_common+0x78/0xb0 [] warn_slowpath_fmt+0x3c/0x40 [] check_for_stack+0xaa/0xe0 [] debug_dma_map_page+0xfd/0x170 [] usb_hcd_submit_urb+0x3da/0x9c0 [usbcore] [] ? lockdep_init_map+0x5f/0x5d0 [] usb_submit_urb+0xe5/0x260 [usbcore] [] usb_start_wait_urb+0x5e/0xf0 [usbcore] [] ? usb_init_urb+0x23/0x40 [usbcore] [] usb_bulk_msg+0xc4/0x150 [usbcore] [] T.719+0x31/0x40 [p54usb] [] p54u_upload_firmware_3887+0x2f/0x490 [p54usb] [] ? p54_parse_firmware+0x427/0x450 [p54common] ---[ end trace f77df0316ddad3de ]--- Signed-off-by: Larry Finger Cc: Stable Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c index 17e1995..92af9b9 100644 --- a/drivers/net/wireless/p54/p54usb.c +++ b/drivers/net/wireless/p54/p54usb.c @@ -426,12 +426,16 @@ static const char p54u_romboot_3887[] = "~~~~"; static int p54u_firmware_reset_3887(struct ieee80211_hw *dev) { struct p54u_priv *priv = dev->priv; - u8 buf[4]; + u8 *buf; int ret; - memcpy(&buf, p54u_romboot_3887, sizeof(buf)); + buf = kmalloc(4, GFP_KERNEL); + if (!buf) + return -ENOMEM; + memcpy(buf, p54u_romboot_3887, 4); ret = p54u_bulk_msg(priv, P54U_PIPE_DATA, - buf, sizeof(buf)); + buf, 4); + kfree(buf); if (ret) dev_err(&priv->udev->dev, "(p54usb) unable to jump to " "boot ROM (%d)!\n", ret); -- cgit v0.10.2 From 505c92470bda486be589729514d3ed5302fb0551 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Thu, 12 Nov 2009 14:55:00 -0800 Subject: MAINTAINERS: RFKILL - Fix pattern entry missing colon Signed-off-by: Joe Perches Signed-off-by: John W. Linville diff --git a/MAINTAINERS b/MAINTAINERS index 223d697..887b50b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4369,7 +4369,7 @@ RFKILL M: Johannes Berg L: linux-wireless@vger.kernel.org S: Maintained -F Documentation/rfkill.txt +F: Documentation/rfkill.txt F: net/rfkill/ RISCOM8 DRIVER -- cgit v0.10.2 From 409b95aff3583c05ac7a9247fa3d8c9aa7f9cae3 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Tue, 10 Nov 2009 08:57:34 +0000 Subject: sctp: Set source addresses on the association before adding transports Recent commit 8da645e101a8c20c6073efda3c7cc74eec01b87f sctp: Get rid of an extra routing lookup when adding a transport introduced a regression in the connection setup. The behavior was different between IPv4 and IPv6. IPv4 case ended up working because the route lookup routing returned a NULL route, which triggered another route lookup later in the output patch that succeeded. In the IPv6 case, a valid route was returned for first call, but we could not find a valid source address at the time since the source addresses were not set on the association yet. Thus resulted in a hung connection. The solution is to set the source addresses on the association prior to adding peers. Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h index 6e5f0e0..cd2e187 100644 --- a/include/net/sctp/structs.h +++ b/include/net/sctp/structs.h @@ -1980,7 +1980,7 @@ void sctp_assoc_set_primary(struct sctp_association *, void sctp_assoc_del_nonprimary_peers(struct sctp_association *, struct sctp_transport *); int sctp_assoc_set_bind_addr_from_ep(struct sctp_association *, - gfp_t); + sctp_scope_t, gfp_t); int sctp_assoc_set_bind_addr_from_cookie(struct sctp_association *, struct sctp_cookie*, gfp_t gfp); diff --git a/net/sctp/associola.c b/net/sctp/associola.c index 8450960..7eed77a 100644 --- a/net/sctp/associola.c +++ b/net/sctp/associola.c @@ -1485,15 +1485,13 @@ void sctp_assoc_rwnd_decrease(struct sctp_association *asoc, unsigned len) * local endpoint and the remote peer. */ int sctp_assoc_set_bind_addr_from_ep(struct sctp_association *asoc, - gfp_t gfp) + sctp_scope_t scope, gfp_t gfp) { - sctp_scope_t scope; int flags; /* Use scoping rules to determine the subset of addresses from * the endpoint. */ - scope = sctp_scope(&asoc->peer.active_path->ipaddr); flags = (PF_INET6 == asoc->base.sk->sk_family) ? SCTP_ADDR6_ALLOWED : 0; if (asoc->peer.ipv4_address) flags |= SCTP_ADDR4_PEERSUPP; diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c index c8fae19..d4df450 100644 --- a/net/sctp/sm_statefuns.c +++ b/net/sctp/sm_statefuns.c @@ -384,6 +384,11 @@ sctp_disposition_t sctp_sf_do_5_1B_init(const struct sctp_endpoint *ep, if (!new_asoc) goto nomem; + if (sctp_assoc_set_bind_addr_from_ep(new_asoc, + sctp_scope(sctp_source(chunk)), + GFP_ATOMIC) < 0) + goto nomem_init; + /* The call, sctp_process_init(), can fail on memory allocation. */ if (!sctp_process_init(new_asoc, chunk->chunk_hdr->type, sctp_source(chunk), @@ -401,9 +406,6 @@ sctp_disposition_t sctp_sf_do_5_1B_init(const struct sctp_endpoint *ep, len = ntohs(err_chunk->chunk_hdr->length) - sizeof(sctp_chunkhdr_t); - if (sctp_assoc_set_bind_addr_from_ep(new_asoc, GFP_ATOMIC) < 0) - goto nomem_init; - repl = sctp_make_init_ack(new_asoc, chunk, GFP_ATOMIC, len); if (!repl) goto nomem_init; @@ -1452,6 +1454,10 @@ static sctp_disposition_t sctp_sf_do_unexpected_init( if (!new_asoc) goto nomem; + if (sctp_assoc_set_bind_addr_from_ep(new_asoc, + sctp_scope(sctp_source(chunk)), GFP_ATOMIC) < 0) + goto nomem; + /* In the outbound INIT ACK the endpoint MUST copy its current * Verification Tag and Peers Verification tag into a reserved * place (local tie-tag and per tie-tag) within the state cookie. @@ -1488,9 +1494,6 @@ static sctp_disposition_t sctp_sf_do_unexpected_init( sizeof(sctp_chunkhdr_t); } - if (sctp_assoc_set_bind_addr_from_ep(new_asoc, GFP_ATOMIC) < 0) - goto nomem; - repl = sctp_make_init_ack(new_asoc, chunk, GFP_ATOMIC, len); if (!repl) goto nomem; diff --git a/net/sctp/socket.c b/net/sctp/socket.c index c8d0575..bf705ba 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -1080,6 +1080,13 @@ static int __sctp_connect(struct sock* sk, err = -ENOMEM; goto out_free; } + + err = sctp_assoc_set_bind_addr_from_ep(asoc, scope, + GFP_KERNEL); + if (err < 0) { + goto out_free; + } + } /* Prime the peer's transport structures. */ @@ -1095,11 +1102,6 @@ static int __sctp_connect(struct sock* sk, walk_size += af->sockaddr_len; } - err = sctp_assoc_set_bind_addr_from_ep(asoc, GFP_KERNEL); - if (err < 0) { - goto out_free; - } - /* In case the user of sctp_connectx() wants an association * id back, assign one now. */ @@ -1689,6 +1691,11 @@ SCTP_STATIC int sctp_sendmsg(struct kiocb *iocb, struct sock *sk, goto out_unlock; } asoc = new_asoc; + err = sctp_assoc_set_bind_addr_from_ep(asoc, scope, GFP_KERNEL); + if (err < 0) { + err = -ENOMEM; + goto out_free; + } /* If the SCTP_INIT ancillary data is specified, set all * the association init values accordingly. @@ -1718,11 +1725,6 @@ SCTP_STATIC int sctp_sendmsg(struct kiocb *iocb, struct sock *sk, err = -ENOMEM; goto out_free; } - err = sctp_assoc_set_bind_addr_from_ep(asoc, GFP_KERNEL); - if (err < 0) { - err = -ENOMEM; - goto out_free; - } } /* ASSERT: we have a valid association at this point. */ -- cgit v0.10.2 From f9c67811ebc00a42f62f5d542d3abd36bd49ae35 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Wed, 11 Nov 2009 08:19:24 +0000 Subject: sctp: Fix regression introduced by new sctp_connectx api A new (unrealeased to the user) sctp_connectx api c6ba68a26645dbc5029a9faa5687ebe6fcfc53e4 sctp: support non-blocking version of the new sctp_connectx() API introduced a regression cought by the user regression test suite. In particular, the API requires the user library to re-allocate the buffer and could potentially trigger a SIGFAULT. This change corrects that regression by passing the original address buffer to the kernel unmodified, but still allows for a returned association id. Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller diff --git a/net/sctp/socket.c b/net/sctp/socket.c index bf705ba..3a95fcb 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -1276,22 +1276,30 @@ SCTP_STATIC int sctp_setsockopt_connectx(struct sock* sk, } /* - * New (hopefully final) interface for the API. The option buffer is used - * both for the returned association id and the addresses. + * New (hopefully final) interface for the API. + * We use the sctp_getaddrs_old structure so that use-space library + * can avoid any unnecessary allocations. The only defferent part + * is that we store the actual length of the address buffer into the + * addrs_num structure member. That way we can re-use the existing + * code. */ SCTP_STATIC int sctp_getsockopt_connectx3(struct sock* sk, int len, char __user *optval, int __user *optlen) { + struct sctp_getaddrs_old param; sctp_assoc_t assoc_id = 0; int err = 0; - if (len < sizeof(assoc_id)) + if (len < sizeof(param)) return -EINVAL; + if (copy_from_user(¶m, optval, sizeof(param))) + return -EFAULT; + err = __sctp_setsockopt_connectx(sk, - (struct sockaddr __user *)(optval + sizeof(assoc_id)), - len - sizeof(assoc_id), &assoc_id); + (struct sockaddr __user *)param.addrs, + param.addr_num, &assoc_id); if (err == 0 || err == -EINPROGRESS) { if (copy_to_user(optval, &assoc_id, sizeof(assoc_id))) -- cgit v0.10.2 From a78102e74e782914039cd8a6939532649825a2e3 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Wed, 11 Nov 2009 11:54:37 +0000 Subject: sctp: Set socket source address when additing first transport Recent commits sctp: Get rid of an extra routing lookup when adding a transport and sctp: Set source addresses on the association before adding transports changed when routes are added to the sctp transports. As such, we didn't set the socket source address correctly when adding the first transport. The first transport is always the primary/active one, so when adding it, set the socket source address. This was causing regression failures in SCTP tests. Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller diff --git a/net/sctp/transport.c b/net/sctp/transport.c index c256e48..3b141bb 100644 --- a/net/sctp/transport.c +++ b/net/sctp/transport.c @@ -308,7 +308,8 @@ void sctp_transport_route(struct sctp_transport *transport, /* Initialize sk->sk_rcv_saddr, if the transport is the * association's active path for getsockname(). */ - if (asoc && (transport == asoc->peer.active_path)) + if (asoc && (!asoc->peer.primary_path || + (transport == asoc->peer.active_path))) opt->pf->af->to_sk_saddr(&transport->saddr, asoc->base.sk); } else -- cgit v0.10.2 From b8a623bf836ccfab09a5a6daf62116f455082e6e Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Tue, 10 Nov 2009 09:44:23 +0000 Subject: s2io: fixing a ethtool test that is broken Due commit 4b77b0a2ba27d64f58f16d8d4d48d8319dda36ff, it is not more possible to pci_restore_state() more than once without calling pci_save_state() in the middle. Actually running a ethtool test on s2io makes the card inactive, and it needs to unload/reload the module to fix. This patch just save the state just after it restore in order to keep the old behaviour Signed-off-by: Breno Leitao Signed-off-by: David S. Miller diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index ddccf5f..0dd7839 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -3494,6 +3494,7 @@ static void s2io_reset(struct s2io_nic *sp) /* Restore the PCI state saved during initialization. */ pci_restore_state(sp->pdev); + pci_save_state(sp->pdev); pci_read_config_word(sp->pdev, 0x2, &val16); if (check_pci_device_id(val16) != (u16)PCI_ANY_ID) break; -- cgit v0.10.2 From d0490cfdf440fded2c292cfb8bb9272fc9ef6943 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 11 Nov 2009 02:03:54 +0000 Subject: ipmr: missing dev_put() on error path in vif_add() The other error paths in front of this one have a dev_put() but this one got missed. Found by smatch static checker. Signed-off-by: Dan Carpenter Acked-by: Wang Chen Signed-off-by: David S. Miller diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c index 630a56d..99508d6 100644 --- a/net/ipv4/ipmr.c +++ b/net/ipv4/ipmr.c @@ -483,8 +483,10 @@ static int vif_add(struct net *net, struct vifctl *vifc, int mrtsock) return -EINVAL; } - if ((in_dev = __in_dev_get_rtnl(dev)) == NULL) + if ((in_dev = __in_dev_get_rtnl(dev)) == NULL) { + dev_put(dev); return -EADDRNOTAVAIL; + } IPV4_DEVCONF(in_dev->cnf, MC_FORWARDING)++; ip_rt_multicast_event(in_dev); -- cgit v0.10.2 From b93cf3f0bb45560d2ce62bdcc2181c40660cfdbf Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Thu, 12 Nov 2009 01:35:01 +0000 Subject: can: Fix driver Kconfig structure In 2.6.32-rc the new EMS USB CAN driver was contributed and added the Kconfig entry right behind an entry of the same *vendor*. This teared the SJA1000 based driver selection into pieces. This fix cleans up the 2.6.32-rc Kconfig files for the CAN drivers and moves the SJA1000 and USB Kconfig portions into the belonging directories. As there are many new CAN drivers in the queue getting this cleanup into 2.6.32-rc would massively reduce the problems for the upcoming drivers. Thanks, Oliver Signed-off-by: Oliver Hartkopp Signed-off-by: Wolfgang Grandegger Signed-off-by: David S. Miller diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig index df32c10..772f6d2 100644 --- a/drivers/net/can/Kconfig +++ b/drivers/net/can/Kconfig @@ -35,66 +35,16 @@ config CAN_CALC_BITTIMING arguments "tq", "prop_seg", "phase_seg1", "phase_seg2" and "sjw". If unsure, say Y. -config CAN_SJA1000 - depends on CAN_DEV && HAS_IOMEM - tristate "Philips SJA1000" - ---help--- - Driver for the SJA1000 CAN controllers from Philips or NXP - -config CAN_SJA1000_ISA - depends on CAN_SJA1000 && ISA - tristate "ISA Bus based legacy SJA1000 driver" - ---help--- - This driver adds legacy support for SJA1000 chips connected to - the ISA bus using I/O port, memory mapped or indirect access. - -config CAN_SJA1000_PLATFORM - depends on CAN_SJA1000 - tristate "Generic Platform Bus based SJA1000 driver" - ---help--- - This driver adds support for the SJA1000 chips connected to - the "platform bus" (Linux abstraction for directly to the - processor attached devices). Which can be found on various - boards from Phytec (http://www.phytec.de) like the PCM027, - PCM038. - -config CAN_SJA1000_OF_PLATFORM - depends on CAN_SJA1000 && PPC_OF - tristate "Generic OF Platform Bus based SJA1000 driver" - ---help--- - This driver adds support for the SJA1000 chips connected to - the OpenFirmware "platform bus" found on embedded systems with - OpenFirmware bindings, e.g. if you have a PowerPC based system - you may want to enable this option. - -config CAN_EMS_PCI - tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card" - depends on PCI && CAN_SJA1000 - ---help--- - This driver is for the one, two or four channel CPC-PCI, - CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche - (http://www.ems-wuensche.de). - -config CAN_EMS_USB - tristate "EMS CPC-USB/ARM7 CAN/USB interface" - depends on USB && CAN_DEV - ---help--- - This driver is for the one channel CPC-USB/ARM7 CAN/USB interface - from from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de). - -config CAN_KVASER_PCI - tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards" - depends on PCI && CAN_SJA1000 - ---help--- - This driver is for the the PCIcanx and PCIcan cards (1, 2 or - 4 channel) from Kvaser (http://www.kvaser.com). - config CAN_AT91 tristate "Atmel AT91 onchip CAN controller" - depends on CAN && CAN_DEV && ARCH_AT91SAM9263 + depends on CAN_DEV && ARCH_AT91SAM9263 ---help--- This is a driver for the SoC CAN controller in Atmel's AT91SAM9263. +source "drivers/net/can/sja1000/Kconfig" + +source "drivers/net/can/usb/Kconfig" + config CAN_DEBUG_DEVICES bool "CAN devices debugging messages" depends on CAN diff --git a/drivers/net/can/sja1000/Kconfig b/drivers/net/can/sja1000/Kconfig new file mode 100644 index 0000000..4c67492 --- /dev/null +++ b/drivers/net/can/sja1000/Kconfig @@ -0,0 +1,47 @@ +menuconfig CAN_SJA1000 + tristate "Philips/NXP SJA1000 devices" + depends on CAN_DEV && HAS_IOMEM + +if CAN_SJA1000 + +config CAN_SJA1000_ISA + tristate "ISA Bus based legacy SJA1000 driver" + depends on ISA + ---help--- + This driver adds legacy support for SJA1000 chips connected to + the ISA bus using I/O port, memory mapped or indirect access. + +config CAN_SJA1000_PLATFORM + tristate "Generic Platform Bus based SJA1000 driver" + ---help--- + This driver adds support for the SJA1000 chips connected to + the "platform bus" (Linux abstraction for directly to the + processor attached devices). Which can be found on various + boards from Phytec (http://www.phytec.de) like the PCM027, + PCM038. + +config CAN_SJA1000_OF_PLATFORM + tristate "Generic OF Platform Bus based SJA1000 driver" + depends on PPC_OF + ---help--- + This driver adds support for the SJA1000 chips connected to + the OpenFirmware "platform bus" found on embedded systems with + OpenFirmware bindings, e.g. if you have a PowerPC based system + you may want to enable this option. + +config CAN_EMS_PCI + tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card" + depends on PCI + ---help--- + This driver is for the one, two or four channel CPC-PCI, + CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche + (http://www.ems-wuensche.de). + +config CAN_KVASER_PCI + tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards" + depends on PCI + ---help--- + This driver is for the the PCIcanx and PCIcan cards (1, 2 or + 4 channel) from Kvaser (http://www.kvaser.com). + +endif diff --git a/drivers/net/can/usb/Kconfig b/drivers/net/can/usb/Kconfig new file mode 100644 index 0000000..bbc78e0 --- /dev/null +++ b/drivers/net/can/usb/Kconfig @@ -0,0 +1,10 @@ +menu "CAN USB interfaces" + depends on USB && CAN_DEV + +config CAN_EMS_USB + tristate "EMS CPC-USB/ARM7 CAN/USB interface" + ---help--- + This driver is for the one channel CPC-USB/ARM7 CAN/USB interface + from from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de). + +endmenu diff --git a/drivers/net/can/usb/Makefile b/drivers/net/can/usb/Makefile index c3f75ba..0afd51d 100644 --- a/drivers/net/can/usb/Makefile +++ b/drivers/net/can/usb/Makefile @@ -3,3 +3,5 @@ # obj-$(CONFIG_CAN_EMS_USB) += ems_usb.o + +ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG -- cgit v0.10.2 From 55369c0a6441e95062cfaeef6eefcfb357a31e8c Mon Sep 17 00:00:00 2001 From: Wolfgang Grandegger Date: Thu, 12 Nov 2009 05:34:05 +0000 Subject: can: add the missing netlink get_xstats_size callback This patch adds the missing "get_xstats_size" callback for the netlink interface, which is required if "fill_xstats" is used, as pointed out by Patrick McHardy. Signed-off-by: Wolfgang Grandegger Signed-off-by: David S. Miller diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c index 564e31c..2868fe8 100644 --- a/drivers/net/can/dev.c +++ b/drivers/net/can/dev.c @@ -629,6 +629,11 @@ nla_put_failure: return -EMSGSIZE; } +static size_t can_get_xstats_size(const struct net_device *dev) +{ + return sizeof(struct can_device_stats); +} + static int can_fill_xstats(struct sk_buff *skb, const struct net_device *dev) { struct can_priv *priv = netdev_priv(dev); @@ -657,6 +662,7 @@ static struct rtnl_link_ops can_link_ops __read_mostly = { .changelink = can_changelink, .get_size = can_get_size, .fill_info = can_fill_info, + .get_xstats_size = can_get_xstats_size, .fill_xstats = can_fill_xstats, }; -- cgit v0.10.2 From 8812304cf1110ae16b0778680f6022216cf4716a Mon Sep 17 00:00:00 2001 From: Raimonds Cicans Date: Fri, 13 Nov 2009 10:52:19 +0000 Subject: r8169: Fix receive buffer length when MTU is between 1515 and 1536 In r8169 driver MTU is used to calculate receive buffer size. Receive buffer size is used to configure hardware incoming packet filter. For jumbo frames: Receive buffer size = Max frame size = MTU + 14 (ethernet header) + 4 (vlan header) + 4 (ethernet checksum) = MTU + 22 Bug: driver for all MTU up to 1536 use receive buffer size 1536 As you can see from formula, this mean all IP packets > 1536 - 22 (for vlan tagged, 1536 - 18 for not tagged) are dropped by hardware filter. Example: host_good> ifconfig eth0 mtu 1536 host_r8169> ifconfig eth0 mtu 1536 host_good> ping host_r8169 Ok host_good> ping -s 1500 host_r8169 Fail host_good> ifconfig eth0 mtu 7000 host_r8169> ifconfig eth0 mtu 7000 host_good> ping -s 1500 host_r8169 Ok Bonus: got rid of magic number 8 Signed-off-by: Raimonds Cicans Signed-off-by: David S. Miller diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index fa49356..b9221bd 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -3243,9 +3243,9 @@ static void __devexit rtl8169_remove_one(struct pci_dev *pdev) static void rtl8169_set_rxbufsize(struct rtl8169_private *tp, struct net_device *dev) { - unsigned int mtu = dev->mtu; + unsigned int max_frame = dev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN; - tp->rx_buf_sz = (mtu > RX_BUF_SIZE) ? mtu + ETH_HLEN + 8 : RX_BUF_SIZE; + tp->rx_buf_sz = (max_frame > RX_BUF_SIZE) ? max_frame : RX_BUF_SIZE; } static int rtl8169_open(struct net_device *dev) -- cgit v0.10.2 From 93f19c9fc8c98bb6d2e9825115989603ffd5cd1f Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Thu, 3 Sep 2009 12:34:19 +0300 Subject: Bluetooth: Set general bonding security for ACL by default This patch fixes double pairing issues with Secure Simple Paring support. It was observed that when pairing with SSP enabled, that the confirmation will be asked twice. http://www.spinics.net/lists/linux-bluetooth/msg02473.html This also causes bug when initiating SSP connection from Windows Vista. The reason is because bluetoothd does not store link keys since HCIGETAUTHINFO returns 0. Setting default to general bonding fixes these issues. Signed-off-by: Andrei Emeltchenko Signed-off-by: Marcel Holtmann diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c index a975098..b7c4224 100644 --- a/net/bluetooth/hci_conn.c +++ b/net/bluetooth/hci_conn.c @@ -211,6 +211,7 @@ struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst) conn->type = type; conn->mode = HCI_CM_ACTIVE; conn->state = BT_OPEN; + conn->auth_type = HCI_AT_GENERAL_BONDING; conn->power_save = 1; conn->disc_timeout = HCI_DISCONN_TIMEOUT; -- cgit v0.10.2 From a0e55a32afc2130e5ae506755e4b8eb42a23b568 Mon Sep 17 00:00:00 2001 From: "Gustavo F. Padovan" Date: Tue, 29 Sep 2009 01:42:23 -0300 Subject: Bluetooth: Select Basic Mode as default for SOCK_SEQPACKET The default mode for SOCK_SEQPACKET is Basic Mode. So when no mode has been specified, Basic Mode shall be used. This is important for current application to keep working as expected and not cause a regression. Signed-off-by: Gustavo F. Padovan Signed-off-by: Marcel Holtmann diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c index 77e9fb1..076caa1 100644 --- a/net/bluetooth/l2cap.c +++ b/net/bluetooth/l2cap.c @@ -2205,7 +2205,7 @@ static int l2cap_build_conf_req(struct sock *sk, void *data) { struct l2cap_pinfo *pi = l2cap_pi(sk); struct l2cap_conf_req *req = data; - struct l2cap_conf_rfc rfc = { .mode = L2CAP_MODE_ERTM }; + struct l2cap_conf_rfc rfc = { .mode = L2CAP_MODE_BASIC }; void *ptr = req->data; BT_DBG("sk %p", sk); -- cgit v0.10.2 From 68ae6639b6dff117ba37f648f1611a4629abadf0 Mon Sep 17 00:00:00 2001 From: "Gustavo F. Padovan" Date: Sat, 17 Oct 2009 21:41:01 -0300 Subject: Bluetooth: Fix regression with L2CAP configuration in Basic Mode Basic Mode is the default mode of operation of a L2CAP entity. In this case the RFC (Retransmission and Flow Control) configuration option should not be used at all. Normally remote L2CAP implementation should just ignore this option, but it can cause various side effects with other Bluetooth stacks that are not capable of handling unknown options. Signed-off-by: Gustavo F. Padovan Signed-off-by: Marcel Holtmann diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c index 076caa1..947f8bb 100644 --- a/net/bluetooth/l2cap.c +++ b/net/bluetooth/l2cap.c @@ -2394,6 +2394,10 @@ done: rfc.monitor_timeout = L2CAP_DEFAULT_MONITOR_TO; pi->conf_state |= L2CAP_CONF_MODE_DONE; + + l2cap_add_conf_opt(&ptr, L2CAP_CONF_RFC, + sizeof(rfc), (unsigned long) &rfc); + break; case L2CAP_MODE_STREAMING: @@ -2401,6 +2405,10 @@ done: pi->max_pdu_size = rfc.max_pdu_size; pi->conf_state |= L2CAP_CONF_MODE_DONE; + + l2cap_add_conf_opt(&ptr, L2CAP_CONF_RFC, + sizeof(rfc), (unsigned long) &rfc); + break; default: @@ -2410,9 +2418,6 @@ done: rfc.mode = pi->mode; } - l2cap_add_conf_opt(&ptr, L2CAP_CONF_RFC, - sizeof(rfc), (unsigned long) &rfc); - if (result == L2CAP_CONF_SUCCESS) pi->conf_state |= L2CAP_CONF_OUTPUT_DONE; } -- cgit v0.10.2 From 3fa8486bae2b56d9f47c1c281866d10fb56c3adc Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Sun, 15 Nov 2009 21:14:59 -0800 Subject: r6040: fix version printing The version string already contains the printk level specifying it again results in the following message being printed: <6>r6040: RDC R6040 NAPI ... Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c index 7dfcb58..8b14c6e 100644 --- a/drivers/net/r6040.c +++ b/drivers/net/r6040.c @@ -1085,7 +1085,7 @@ static int __devinit r6040_init_one(struct pci_dev *pdev, int bar = 0; u16 *adrp; - printk(KERN_INFO "%s\n", version); + printk("%s\n", version); err = pci_enable_device(pdev); if (err) -- cgit v0.10.2 From 655a6595af5cd7e91992bd768d7a5949f813dc0d Mon Sep 17 00:00:00 2001 From: "Stanislav O. Bezzubtsev" Date: Sun, 15 Nov 2009 21:17:02 -0800 Subject: forcedeth: mac address fix Use the existing random_ether_addr() to generate random MAC instead of doing it by-hand. Signed-off-by: Stanislav O. Bezzubtsev Signed-off-by: David S. Miller diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 0a1c2bb..73fe977 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -5820,10 +5820,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i dev->dev_addr); dev_printk(KERN_ERR, &pci_dev->dev, "Please complain to your hardware vendor. Switching to a random MAC.\n"); - dev->dev_addr[0] = 0x00; - dev->dev_addr[1] = 0x00; - dev->dev_addr[2] = 0x6c; - get_random_bytes(&dev->dev_addr[3], 3); + random_ether_addr(dev->dev_addr); } dprintk(KERN_DEBUG "%s: MAC Address %pM\n", -- cgit v0.10.2 From 2c554e10e84e958366344aa5bd293c6feea72d89 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Sun, 15 Nov 2009 21:18:13 -0800 Subject: mISDN: fix error return in HFCmulti_init() The returned error should stay negative Signed-off-by: Roel Kluin Acked-by: Karsten Keil Signed-off-by: David S. Miller diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c index faed794..a6624ad 100644 --- a/drivers/isdn/hardware/mISDN/hfcmulti.c +++ b/drivers/isdn/hardware/mISDN/hfcmulti.c @@ -5481,7 +5481,7 @@ HFCmulti_init(void) if (err) { printk(KERN_ERR "error registering embedded driver: " "%x\n", err); - return -err; + return err; } HFC_cnt++; printk(KERN_INFO "%d devices registered\n", HFC_cnt); -- cgit v0.10.2 From f88c5b9887a95ce424db629ee79b57f6ef5bfddd Mon Sep 17 00:00:00 2001 From: Sriram Date: Thu, 12 Nov 2009 02:14:38 +0000 Subject: smsc911x: Fix Console Hang when bringing the interface down. In the NAPI poll function, check for netif_running() is unnecassary. In addition to associated runtime overhead, it also results in continuous softirq loop when the interface is brought down under heavy traffic(tested with Traffic Generator).Once the interface is disabled, the poll function always returns zero(with the check for netif_running) and napi_complete() would never get called resulting in softirq loop. Signed-off-by: Sriramakrishnan Signed-off-by: David S. Miller diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c index ccdd196..f9cdcbc 100644 --- a/drivers/net/smsc911x.c +++ b/drivers/net/smsc911x.c @@ -986,7 +986,7 @@ static int smsc911x_poll(struct napi_struct *napi, int budget) struct net_device *dev = pdata->dev; int npackets = 0; - while (likely(netif_running(dev)) && (npackets < budget)) { + while (npackets < budget) { unsigned int pktlength; unsigned int pktwords; struct sk_buff *skb; -- cgit v0.10.2 From 5bfa2a17f2b79eb6a63c5d47ce89d5798bba086a Mon Sep 17 00:00:00 2001 From: Sriram Date: Thu, 12 Nov 2009 01:55:42 +0000 Subject: TI Davinci EMAC : Fix Console Hang when bringing the interface down In the NAPI poll function(emac_poll), check for netif_running() is unnecassary. In addition to associated runtime overhead, it also results in a continuous softirq loop when the interface is brought down under heavy traffic(tested wit Traffic Generator). Once the interface is disabled, the poll function always returns zero(with the check for netif_running) and napi_complete() would never get called resulting in softirq loop. Signed-off-by: Sriramakrishnan Acked-by: Chaithrika U S Signed-off-by: David S. Miller diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c index 3179521..db63803 100644 --- a/drivers/net/davinci_emac.c +++ b/drivers/net/davinci_emac.c @@ -2140,9 +2140,6 @@ static int emac_poll(struct napi_struct *napi, int budget) u32 status = 0; u32 num_pkts = 0; - if (!netif_running(ndev)) - return 0; - /* Check interrupt vectors and call packet processing */ status = emac_read(EMAC_MACINVECTOR); -- cgit v0.10.2 From e29d4363174949a7a4e46f670993d7ff43342c1c Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 15 Nov 2009 22:23:47 -0800 Subject: Revert "isdn: isdn_ppp: Use SKB list facilities instead of home-grown implementation." This reverts commit 38783e671399b5405f1fd177d602c400a9577ae6. It causes kernel bugzilla #14594 Signed-off-by: David S. Miller diff --git a/drivers/isdn/i4l/isdn_ppp.c b/drivers/isdn/i4l/isdn_ppp.c index 2d14b64..642d5aa 100644 --- a/drivers/isdn/i4l/isdn_ppp.c +++ b/drivers/isdn/i4l/isdn_ppp.c @@ -1535,10 +1535,8 @@ static int isdn_ppp_mp_bundle_array_init(void) int sz = ISDN_MAX_CHANNELS*sizeof(ippp_bundle); if( (isdn_ppp_bundle_arr = kzalloc(sz, GFP_KERNEL)) == NULL ) return -ENOMEM; - for (i = 0; i < ISDN_MAX_CHANNELS; i++) { + for( i = 0; i < ISDN_MAX_CHANNELS; i++ ) spin_lock_init(&isdn_ppp_bundle_arr[i].lock); - skb_queue_head_init(&isdn_ppp_bundle_arr[i].frags); - } return 0; } @@ -1571,7 +1569,7 @@ static int isdn_ppp_mp_init( isdn_net_local * lp, ippp_bundle * add_to ) if ((lp->netdev->pb = isdn_ppp_mp_bundle_alloc()) == NULL) return -ENOMEM; lp->next = lp->last = lp; /* nobody else in a queue */ - skb_queue_head_init(&lp->netdev->pb->frags); + lp->netdev->pb->frags = NULL; lp->netdev->pb->frames = 0; lp->netdev->pb->seq = UINT_MAX; } @@ -1583,29 +1581,28 @@ static int isdn_ppp_mp_init( isdn_net_local * lp, ippp_bundle * add_to ) static u32 isdn_ppp_mp_get_seq( int short_seq, struct sk_buff * skb, u32 last_seq ); -static void isdn_ppp_mp_discard(ippp_bundle *mp, struct sk_buff *from, - struct sk_buff *to); -static void isdn_ppp_mp_reassembly(isdn_net_dev *net_dev, isdn_net_local *lp, - struct sk_buff *from, struct sk_buff *to, - u32 lastseq); -static void isdn_ppp_mp_free_skb(ippp_bundle *mp, struct sk_buff *skb); +static struct sk_buff * isdn_ppp_mp_discard( ippp_bundle * mp, + struct sk_buff * from, struct sk_buff * to ); +static void isdn_ppp_mp_reassembly( isdn_net_dev * net_dev, isdn_net_local * lp, + struct sk_buff * from, struct sk_buff * to ); +static void isdn_ppp_mp_free_skb( ippp_bundle * mp, struct sk_buff * skb ); static void isdn_ppp_mp_print_recv_pkt( int slot, struct sk_buff * skb ); static void isdn_ppp_mp_receive(isdn_net_dev * net_dev, isdn_net_local * lp, - struct sk_buff *skb) + struct sk_buff *skb) { - struct sk_buff *newfrag, *frag, *start, *nextf; - u32 newseq, minseq, thisseq; - isdn_mppp_stats *stats; struct ippp_struct *is; + isdn_net_local * lpq; + ippp_bundle * mp; + isdn_mppp_stats * stats; + struct sk_buff * newfrag, * frag, * start, *nextf; + u32 newseq, minseq, thisseq; unsigned long flags; - isdn_net_local *lpq; - ippp_bundle *mp; int slot; spin_lock_irqsave(&net_dev->pb->lock, flags); - mp = net_dev->pb; - stats = &mp->stats; + mp = net_dev->pb; + stats = &mp->stats; slot = lp->ppp_slot; if (slot < 0 || slot >= ISDN_MAX_CHANNELS) { printk(KERN_ERR "%s: lp->ppp_slot(%d)\n", @@ -1616,19 +1613,20 @@ static void isdn_ppp_mp_receive(isdn_net_dev * net_dev, isdn_net_local * lp, return; } is = ippp_table[slot]; - if (++mp->frames > stats->max_queue_len) + if( ++mp->frames > stats->max_queue_len ) stats->max_queue_len = mp->frames; - + if (is->debug & 0x8) isdn_ppp_mp_print_recv_pkt(lp->ppp_slot, skb); - newseq = isdn_ppp_mp_get_seq(is->mpppcfg & SC_IN_SHORT_SEQ, - skb, is->last_link_seqno); + newseq = isdn_ppp_mp_get_seq(is->mpppcfg & SC_IN_SHORT_SEQ, + skb, is->last_link_seqno); + /* if this packet seq # is less than last already processed one, * toss it right away, but check for sequence start case first */ - if (mp->seq > MP_LONGSEQ_MAX && (newseq & MP_LONGSEQ_MAXBIT)) { + if( mp->seq > MP_LONGSEQ_MAX && (newseq & MP_LONGSEQ_MAXBIT) ) { mp->seq = newseq; /* the first packet: required for * rfc1990 non-compliant clients -- * prevents constant packet toss */ @@ -1638,7 +1636,7 @@ static void isdn_ppp_mp_receive(isdn_net_dev * net_dev, isdn_net_local * lp, spin_unlock_irqrestore(&mp->lock, flags); return; } - + /* find the minimum received sequence number over all links */ is->last_link_seqno = minseq = newseq; for (lpq = net_dev->queue;;) { @@ -1659,31 +1657,22 @@ static void isdn_ppp_mp_receive(isdn_net_dev * net_dev, isdn_net_local * lp, * packets */ newfrag = skb; - /* Insert new fragment into the proper sequence slot. */ - skb_queue_walk(&mp->frags, frag) { - if (MP_SEQ(frag) == newseq) { - isdn_ppp_mp_free_skb(mp, newfrag); - newfrag = NULL; - break; - } - if (MP_LT(newseq, MP_SEQ(frag))) { - __skb_queue_before(&mp->frags, frag, newfrag); - newfrag = NULL; - break; - } - } - if (newfrag) - __skb_queue_tail(&mp->frags, newfrag); + /* if this new fragment is before the first one, then enqueue it now. */ + if ((frag = mp->frags) == NULL || MP_LT(newseq, MP_SEQ(frag))) { + newfrag->next = frag; + mp->frags = frag = newfrag; + newfrag = NULL; + } - frag = skb_peek(&mp->frags); - start = ((MP_FLAGS(frag) & MP_BEGIN_FRAG) && - (MP_SEQ(frag) == mp->seq)) ? frag : NULL; - if (!start) - goto check_overflow; + start = MP_FLAGS(frag) & MP_BEGIN_FRAG && + MP_SEQ(frag) == mp->seq ? frag : NULL; - /* main fragment traversing loop + /* + * main fragment traversing loop * * try to accomplish several tasks: + * - insert new fragment into the proper sequence slot (once that's done + * newfrag will be set to NULL) * - reassemble any complete fragment sequence (non-null 'start' * indicates there is a continguous sequence present) * - discard any incomplete sequences that are below minseq -- due @@ -1692,46 +1681,71 @@ static void isdn_ppp_mp_receive(isdn_net_dev * net_dev, isdn_net_local * lp, * come to complete such sequence and it should be discarded * * loop completes when we accomplished the following tasks: + * - new fragment is inserted in the proper sequence ('newfrag' is + * set to NULL) * - we hit a gap in the sequence, so no reassembly/processing is * possible ('start' would be set to NULL) * * algorithm for this code is derived from code in the book * 'PPP Design And Debugging' by James Carlson (Addison-Wesley) */ - skb_queue_walk_safe(&mp->frags, frag, nextf) { - thisseq = MP_SEQ(frag); - - /* check for misplaced start */ - if (start != frag && (MP_FLAGS(frag) & MP_BEGIN_FRAG)) { - printk(KERN_WARNING"isdn_mppp(seq %d): new " - "BEGIN flag with no prior END", thisseq); - stats->seqerrs++; - stats->frame_drops++; - isdn_ppp_mp_discard(mp, start, frag); - start = frag; - } else if (MP_LE(thisseq, minseq)) { - if (MP_FLAGS(frag) & MP_BEGIN_FRAG) + while (start != NULL || newfrag != NULL) { + + thisseq = MP_SEQ(frag); + nextf = frag->next; + + /* drop any duplicate fragments */ + if (newfrag != NULL && thisseq == newseq) { + isdn_ppp_mp_free_skb(mp, newfrag); + newfrag = NULL; + } + + /* insert new fragment before next element if possible. */ + if (newfrag != NULL && (nextf == NULL || + MP_LT(newseq, MP_SEQ(nextf)))) { + newfrag->next = nextf; + frag->next = nextf = newfrag; + newfrag = NULL; + } + + if (start != NULL) { + /* check for misplaced start */ + if (start != frag && (MP_FLAGS(frag) & MP_BEGIN_FRAG)) { + printk(KERN_WARNING"isdn_mppp(seq %d): new " + "BEGIN flag with no prior END", thisseq); + stats->seqerrs++; + stats->frame_drops++; + start = isdn_ppp_mp_discard(mp, start,frag); + nextf = frag->next; + } + } else if (MP_LE(thisseq, minseq)) { + if (MP_FLAGS(frag) & MP_BEGIN_FRAG) start = frag; - else { + else { if (MP_FLAGS(frag) & MP_END_FRAG) - stats->frame_drops++; - __skb_unlink(skb, &mp->frags); + stats->frame_drops++; + if( mp->frags == frag ) + mp->frags = nextf; isdn_ppp_mp_free_skb(mp, frag); + frag = nextf; continue; - } + } } - - /* if we have end fragment, then we have full reassembly - * sequence -- reassemble and process packet now + + /* if start is non-null and we have end fragment, then + * we have full reassembly sequence -- reassemble + * and process packet now */ - if (MP_FLAGS(frag) & MP_END_FRAG) { - minseq = mp->seq = (thisseq+1) & MP_LONGSEQ_MASK; - /* Reassemble the packet then dispatch it */ - isdn_ppp_mp_reassembly(net_dev, lp, start, frag, thisseq); + if (start != NULL && (MP_FLAGS(frag) & MP_END_FRAG)) { + minseq = mp->seq = (thisseq+1) & MP_LONGSEQ_MASK; + /* Reassemble the packet then dispatch it */ + isdn_ppp_mp_reassembly(net_dev, lp, start, nextf); + + start = NULL; + frag = NULL; - start = NULL; - frag = NULL; - } + mp->frags = nextf; + } /* check if need to update start pointer: if we just * reassembled the packet and sequence is contiguous @@ -1742,25 +1756,26 @@ static void isdn_ppp_mp_receive(isdn_net_dev * net_dev, isdn_net_local * lp, * below low watermark and set start to the next frag or * clear start ptr. */ - if (nextf != (struct sk_buff *)&mp->frags && + if (nextf != NULL && ((thisseq+1) & MP_LONGSEQ_MASK) == MP_SEQ(nextf)) { - /* if we just reassembled and the next one is here, - * then start another reassembly. - */ - if (frag == NULL) { + /* if we just reassembled and the next one is here, + * then start another reassembly. */ + + if (frag == NULL) { if (MP_FLAGS(nextf) & MP_BEGIN_FRAG) - start = nextf; - else { - printk(KERN_WARNING"isdn_mppp(seq %d):" - " END flag with no following " - "BEGIN", thisseq); + start = nextf; + else + { + printk(KERN_WARNING"isdn_mppp(seq %d):" + " END flag with no following " + "BEGIN", thisseq); stats->seqerrs++; } } - } else { - if (nextf != (struct sk_buff *)&mp->frags && - frag != NULL && - MP_LT(thisseq, minseq)) { + + } else { + if ( nextf != NULL && frag != NULL && + MP_LT(thisseq, minseq)) { /* we've got a break in the sequence * and we not at the end yet * and we did not just reassembled @@ -1769,39 +1784,41 @@ static void isdn_ppp_mp_receive(isdn_net_dev * net_dev, isdn_net_local * lp, * discard all the frames below low watermark * and start over */ stats->frame_drops++; - isdn_ppp_mp_discard(mp, start, nextf); + mp->frags = isdn_ppp_mp_discard(mp,start,nextf); } /* break in the sequence, no reassembly */ - start = NULL; - } - if (!start) - break; - } - -check_overflow: + start = NULL; + } + + frag = nextf; + } /* while -- main loop */ + + if (mp->frags == NULL) + mp->frags = frag; + /* rather straighforward way to deal with (not very) possible - * queue overflow - */ + * queue overflow */ if (mp->frames > MP_MAX_QUEUE_LEN) { stats->overflows++; - skb_queue_walk_safe(&mp->frags, frag, nextf) { - if (mp->frames <= MP_MAX_QUEUE_LEN) - break; - __skb_unlink(frag, &mp->frags); - isdn_ppp_mp_free_skb(mp, frag); + while (mp->frames > MP_MAX_QUEUE_LEN) { + frag = mp->frags->next; + isdn_ppp_mp_free_skb(mp, mp->frags); + mp->frags = frag; } } spin_unlock_irqrestore(&mp->lock, flags); } -static void isdn_ppp_mp_cleanup(isdn_net_local *lp) +static void isdn_ppp_mp_cleanup( isdn_net_local * lp ) { - struct sk_buff *skb, *tmp; - - skb_queue_walk_safe(&lp->netdev->pb->frags, skb, tmp) { - __skb_unlink(skb, &lp->netdev->pb->frags); - isdn_ppp_mp_free_skb(lp->netdev->pb, skb); - } + struct sk_buff * frag = lp->netdev->pb->frags; + struct sk_buff * nextfrag; + while( frag ) { + nextfrag = frag->next; + isdn_ppp_mp_free_skb(lp->netdev->pb, frag); + frag = nextfrag; + } + lp->netdev->pb->frags = NULL; } static u32 isdn_ppp_mp_get_seq( int short_seq, @@ -1838,115 +1855,72 @@ static u32 isdn_ppp_mp_get_seq( int short_seq, return seq; } -static void isdn_ppp_mp_discard(ippp_bundle *mp, struct sk_buff *from, - struct sk_buff *to) +struct sk_buff * isdn_ppp_mp_discard( ippp_bundle * mp, + struct sk_buff * from, struct sk_buff * to ) { - if (from) { - struct sk_buff *skb, *tmp; - int freeing = 0; - - skb_queue_walk_safe(&mp->frags, skb, tmp) { - if (skb == to) - break; - if (skb == from) - freeing = 1; - if (!freeing) - continue; - __skb_unlink(skb, &mp->frags); - isdn_ppp_mp_free_skb(mp, skb); + if( from ) + while (from != to) { + struct sk_buff * next = from->next; + isdn_ppp_mp_free_skb(mp, from); + from = next; } - } -} - -static unsigned int calc_tot_len(struct sk_buff_head *queue, - struct sk_buff *from, struct sk_buff *to) -{ - unsigned int tot_len = 0; - struct sk_buff *skb; - int found_start = 0; - - skb_queue_walk(queue, skb) { - if (skb == from) - found_start = 1; - if (!found_start) - continue; - tot_len += skb->len - MP_HEADER_LEN; - if (skb == to) - break; - } - return tot_len; + return from; } -/* Reassemble packet using fragments in the reassembly queue from - * 'from' until 'to', inclusive. - */ -static void isdn_ppp_mp_reassembly(isdn_net_dev *net_dev, isdn_net_local *lp, - struct sk_buff *from, struct sk_buff *to, - u32 lastseq) +void isdn_ppp_mp_reassembly( isdn_net_dev * net_dev, isdn_net_local * lp, + struct sk_buff * from, struct sk_buff * to ) { - ippp_bundle *mp = net_dev->pb; - unsigned int tot_len; - struct sk_buff *skb; + ippp_bundle * mp = net_dev->pb; int proto; + struct sk_buff * skb; + unsigned int tot_len; if (lp->ppp_slot < 0 || lp->ppp_slot >= ISDN_MAX_CHANNELS) { printk(KERN_ERR "%s: lp->ppp_slot(%d) out of range\n", __func__, lp->ppp_slot); return; } - - tot_len = calc_tot_len(&mp->frags, from, to); - - if (MP_FLAGS(from) == (MP_BEGIN_FRAG | MP_END_FRAG)) { - if (ippp_table[lp->ppp_slot]->debug & 0x40) + if( MP_FLAGS(from) == (MP_BEGIN_FRAG | MP_END_FRAG) ) { + if( ippp_table[lp->ppp_slot]->debug & 0x40 ) printk(KERN_DEBUG "isdn_mppp: reassembly: frame %d, " - "len %d\n", MP_SEQ(from), from->len); + "len %d\n", MP_SEQ(from), from->len ); skb = from; skb_pull(skb, MP_HEADER_LEN); - __skb_unlink(skb, &mp->frags); mp->frames--; } else { - struct sk_buff *walk, *tmp; - int found_start = 0; + struct sk_buff * frag; + int n; - if (ippp_table[lp->ppp_slot]->debug & 0x40) - printk(KERN_DEBUG"isdn_mppp: reassembling frames %d " - "to %d, len %d\n", MP_SEQ(from), lastseq, - tot_len); + for(tot_len=n=0, frag=from; frag != to; frag=frag->next, n++) + tot_len += frag->len - MP_HEADER_LEN; - skb = dev_alloc_skb(tot_len); - if (!skb) + if( ippp_table[lp->ppp_slot]->debug & 0x40 ) + printk(KERN_DEBUG"isdn_mppp: reassembling frames %d " + "to %d, len %d\n", MP_SEQ(from), + (MP_SEQ(from)+n-1) & MP_LONGSEQ_MASK, tot_len ); + if( (skb = dev_alloc_skb(tot_len)) == NULL ) { printk(KERN_ERR "isdn_mppp: cannot allocate sk buff " - "of size %d\n", tot_len); - - found_start = 0; - skb_queue_walk_safe(&mp->frags, walk, tmp) { - if (walk == from) - found_start = 1; - if (!found_start) - continue; + "of size %d\n", tot_len); + isdn_ppp_mp_discard(mp, from, to); + return; + } - if (skb) { - unsigned int len = walk->len - MP_HEADER_LEN; - skb_copy_from_linear_data_offset(walk, MP_HEADER_LEN, - skb_put(skb, len), - len); - } - __skb_unlink(walk, &mp->frags); - isdn_ppp_mp_free_skb(mp, walk); + while( from != to ) { + unsigned int len = from->len - MP_HEADER_LEN; - if (walk == to) - break; + skb_copy_from_linear_data_offset(from, MP_HEADER_LEN, + skb_put(skb,len), + len); + frag = from->next; + isdn_ppp_mp_free_skb(mp, from); + from = frag; } } - if (!skb) - return; - proto = isdn_ppp_strip_proto(skb); isdn_ppp_push_higher(net_dev, lp, skb, proto); } -static void isdn_ppp_mp_free_skb(ippp_bundle *mp, struct sk_buff *skb) +static void isdn_ppp_mp_free_skb(ippp_bundle * mp, struct sk_buff * skb) { dev_kfree_skb(skb); mp->frames--; diff --git a/include/linux/isdn_ppp.h b/include/linux/isdn_ppp.h index 4c218ee..8687a7d 100644 --- a/include/linux/isdn_ppp.h +++ b/include/linux/isdn_ppp.h @@ -157,7 +157,7 @@ typedef struct { typedef struct { int mp_mrru; /* unused */ - struct sk_buff_head frags; /* fragments sl list */ + struct sk_buff * frags; /* fragments sl list -- use skb->next */ long frames; /* number of frames in the frame list */ unsigned int seq; /* last processed packet seq #: any packets * with smaller seq # will be dropped -- cgit v0.10.2 From 91e9c07bd635353d1a278bdb38dbb56ac371bcb8 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sun, 15 Nov 2009 23:30:24 +0000 Subject: net: Fix the rollback test in dev_change_name() net: Fix the rollback test in dev_change_name() In dev_change_name() an err variable is used for storing the original call_netdevice_notifiers() errno (negative) and testing for a rollback error later, but the test for non-zero is wrong, because the err might have positive value as well - from dev_alloc_name(). It means the rollback for a netdevice with a number > 0 will never happen. (The err test is reordered btw. to make it more readable.) Signed-off-by: Jarek Poplawski Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/core/dev.c b/net/core/dev.c index b8f74cf..fe10551 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -942,14 +942,15 @@ rollback: ret = notifier_to_errno(ret); if (ret) { - if (err) { - printk(KERN_ERR - "%s: name change rollback failed: %d.\n", - dev->name, ret); - } else { + /* err >= 0 after dev_alloc_name() or stores the first errno */ + if (err >= 0) { err = ret; memcpy(dev->name, oldname, IFNAMSIZ); goto rollback; + } else { + printk(KERN_ERR + "%s: name change rollback failed: %d.\n", + dev->name, ret); } } -- cgit v0.10.2 From c0e1f68bce454d244e2eea6b0ab7b3a217c673d2 Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Tue, 10 Nov 2009 08:37:47 +0000 Subject: ixgbe: Fixing EEH handler to handle more than one error After commmit 4b77b0a2ba27d64f58f16d8d4d48d8319dda36ff EEH breaks after the second error, since it calls pci_restore_state() but it returns 0, since pci->state_saved is false. So, this patch just call pci_save_state() after pci_restore_state(). Signed-off-by: Breno Leitao Acked-by: Peter P Waskiewicz Jr Signed-off-by: David S. Miller diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 5bd9e6b..a5036f7 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -5994,6 +5994,7 @@ static pci_ers_result_t ixgbe_io_slot_reset(struct pci_dev *pdev) } else { pci_set_master(pdev); pci_restore_state(pdev); + pci_save_state(pdev); pci_wake_from_d3(pdev, false); -- cgit v0.10.2 From 82b3cc1a2f5e46300a9dec4a8cc8106dc20a4c23 Mon Sep 17 00:00:00 2001 From: Ben McKeegan Date: Mon, 16 Nov 2009 03:44:25 +0000 Subject: ppp: fix BUG on non-linear SKB (multilink receive) PPP does not correctly call pskb_may_pull() on all necessary receive paths before reading the PPP protocol, thus causing PPP to report seemingly random 'unsupported protocols' and eventually trigger BUG_ON(skb->len < skb->data_len) in skb_pull_rcsum() when receiving multilink protocol in non-linear skbs. ppp_receive_nonmp_frame() does not call pskb_may_pull() before reading the protocol number. For the non-mp receive path this is not a problem, as this check is done in ppp_receive_frame(). For the mp receive path, ppp_mp_reconstruct() usually copies the data into a new linear skb. However, in the case where the frame is made up of a single mp fragment, the mp header is pulled and the existing skb used. This skb was then passed to ppp_receive_nonmp_frame() without checking if the encapsulated protocol header could safely be read. Signed-off-by: Ben McKeegan Signed-off-by: David S. Miller diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c index 9bf2a6b..965adb6 100644 --- a/drivers/net/ppp_generic.c +++ b/drivers/net/ppp_generic.c @@ -1944,8 +1944,15 @@ ppp_receive_mp_frame(struct ppp *ppp, struct sk_buff *skb, struct channel *pch) } /* Pull completed packets off the queue and receive them. */ - while ((skb = ppp_mp_reconstruct(ppp))) - ppp_receive_nonmp_frame(ppp, skb); + while ((skb = ppp_mp_reconstruct(ppp))) { + if (pskb_may_pull(skb, 2)) + ppp_receive_nonmp_frame(ppp, skb); + else { + ++ppp->dev->stats.rx_length_errors; + kfree_skb(skb); + ppp_receive_error(ppp); + } + } return; -- cgit v0.10.2