From 7656e2486cb1ab7cdee65652ee695bdff894ea73 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 20 Aug 2010 15:59:40 +0900 Subject: sh: Support type 1 accesses for SH7786 PCI. This enables support for type 1 config space accesses on the SH7786 PCI controller. At the same time, add in some extra sanity checks for controller asserted errors. Signed-off-by: Paul Mundt diff --git a/arch/sh/drivers/pci/ops-sh7786.c b/arch/sh/drivers/pci/ops-sh7786.c index 48f594b..57134a3 100644 --- a/arch/sh/drivers/pci/ops-sh7786.c +++ b/arch/sh/drivers/pci/ops-sh7786.c @@ -1,7 +1,7 @@ /* * Generic SH7786 PCI-Express operations. * - * Copyright (C) 2009 Paul Mundt + * Copyright (C) 2009 - 2010 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License v2. See the file "COPYING" in the main directory of this archive @@ -35,22 +35,34 @@ static int sh7786_pcie_config_access(unsigned char access_type, if (devfn) return PCIBIOS_DEVICE_NOT_FOUND; + /* Clear errors */ + pci_write_reg(chan, pci_read_reg(chan, SH4A_PCIEERRFR), SH4A_PCIEERRFR); + /* Set the PIO address */ pci_write_reg(chan, (bus->number << 24) | (dev << 19) | (func << 16) | (where & ~3), SH4A_PCIEPAR); /* Enable the configuration access */ - pci_write_reg(chan, (1 << 31), SH4A_PCIEPCTLR); + if (bus->number) { + /* Type 1 */ + pci_write_reg(chan, (1 << 31) | (1 << 8), SH4A_PCIEPCTLR); + } else { + /* Type 0 */ + pci_write_reg(chan, (1 << 31), SH4A_PCIEPCTLR); + } + + /* Check for errors */ + if (pci_read_reg(chan, SH4A_PCIEERRFR) & 0x10) + return PCIBIOS_DEVICE_NOT_FOUND; + /* Check for master and target aborts */ + if (pci_read_reg(chan, SH4A_PCIEPCICONF1) & ((1 << 29) | (1 << 28))) + return PCIBIOS_DEVICE_NOT_FOUND; if (access_type == PCI_ACCESS_READ) *data = pci_read_reg(chan, SH4A_PCIEPDR); else pci_write_reg(chan, *data, SH4A_PCIEPDR); - /* Check for master and target aborts */ - if (pci_read_reg(chan, SH4A_PCIEPCICONF1) & ((1 << 29) | (1 << 28))) - return PCIBIOS_DEVICE_NOT_FOUND; - return PCIBIOS_SUCCESSFUL; } @@ -69,8 +81,10 @@ static int sh7786_pcie_read(struct pci_bus *bus, unsigned int devfn, spin_lock_irqsave(&sh7786_pcie_lock, flags); ret = sh7786_pcie_config_access(PCI_ACCESS_READ, bus, devfn, where, &data); - if (ret != PCIBIOS_SUCCESSFUL) + if (ret != PCIBIOS_SUCCESSFUL) { + *val = 0xffffffff; goto out; + } if (size == 1) *val = (data >> ((where & 3) << 3)) & 0xff; -- cgit v0.10.2