From 76ec9d18b8972f1b228f819f6126c9f022b3e642 Mon Sep 17 00:00:00 2001 From: Alexandre Courbot Date: Thu, 28 Mar 2013 04:34:56 -0700 Subject: Convert selectors of GENERIC_GPIO to GPIOLIB GENERIC_GPIO is now equivalent to GPIOLIB and features that depended on GENERIC_GPIO can now depend on GPIOLIB to allow removal of this option. Signed-off-by: Alexandre Courbot Acked-by: Linus Walleij Acked-by: Grant Likely diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig index 63521dc..468cd70 100644 --- a/arch/unicore32/Kconfig +++ b/arch/unicore32/Kconfig @@ -156,7 +156,7 @@ source "mm/Kconfig" config LEDS def_bool y - depends on GENERIC_GPIO + depends on GPIOLIB config ALIGNMENT_TRAP def_bool y diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig index 5168a13..3297301 100644 --- a/drivers/extcon/Kconfig +++ b/drivers/extcon/Kconfig @@ -16,7 +16,7 @@ comment "Extcon Device Drivers" config EXTCON_GPIO tristate "GPIO extcon support" - depends on GENERIC_GPIO + depends on GPIOLIB help Say Y here to enable GPIO based extcon support. Note that GPIO extcon supports single state per extcon instance. diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index adfee98..631736e 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -363,7 +363,7 @@ config I2C_BLACKFIN_TWI_CLK_KHZ config I2C_CBUS_GPIO tristate "CBUS I2C driver" - depends on GENERIC_GPIO + depends on GPIOLIB help Support for CBUS access using I2C API. Mostly relevant for Nokia Internet Tablets (770, N800 and N810). @@ -436,7 +436,7 @@ config I2C_EG20T config I2C_GPIO tristate "GPIO-based bitbanging I2C" - depends on GENERIC_GPIO + depends on GPIOLIB select I2C_ALGOBIT help This is a very simple bitbanging I2C driver utilizing the diff --git a/drivers/i2c/muxes/Kconfig b/drivers/i2c/muxes/Kconfig index 0be5b83..40062ed 100644 --- a/drivers/i2c/muxes/Kconfig +++ b/drivers/i2c/muxes/Kconfig @@ -7,7 +7,7 @@ menu "Multiplexer I2C Chip support" config I2C_MUX_GPIO tristate "GPIO-based I2C multiplexer" - depends on GENERIC_GPIO + depends on GPIOLIB help If you say yes to this option, support will be included for a GPIO based I2C multiplexer. This driver provides access to diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index ac05006..772666f 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -175,7 +175,7 @@ config KEYBOARD_EP93XX config KEYBOARD_GPIO tristate "GPIO Buttons" - depends on GENERIC_GPIO + depends on GPIOLIB help This driver implements support for buttons connected to GPIO pins of various CPUs (and some other chips). @@ -190,7 +190,7 @@ config KEYBOARD_GPIO config KEYBOARD_GPIO_POLLED tristate "Polled GPIO buttons" - depends on GENERIC_GPIO + depends on GPIOLIB select INPUT_POLLDEV help This driver implements support for buttons connected @@ -241,7 +241,7 @@ config KEYBOARD_TCA8418 config KEYBOARD_MATRIX tristate "GPIO driven matrix keypad support" - depends on GENERIC_GPIO + depends on GPIOLIB select INPUT_MATRIXKMAP help Enable support for GPIO driven matrix keypad. diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 259ef31..262cda2 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -214,7 +214,7 @@ config INPUT_APANEL config INPUT_GP2A tristate "Sharp GP2AP002A00F I2C Proximity/Opto sensor driver" depends on I2C - depends on GENERIC_GPIO + depends on GPIOLIB help Say Y here if you have a Sharp GP2AP002A00F proximity/als combo-chip hooked to an I2C bus. @@ -224,7 +224,7 @@ config INPUT_GP2A config INPUT_GPIO_TILT_POLLED tristate "Polled GPIO tilt switch" - depends on GENERIC_GPIO + depends on GPIOLIB select INPUT_POLLDEV help This driver implements support for tilt switches connected @@ -472,7 +472,7 @@ config INPUT_PWM_BEEPER config INPUT_GPIO_ROTARY_ENCODER tristate "Rotary encoders connected to GPIO pins" - depends on GPIOLIB && GENERIC_GPIO + depends on GPIOLIB help Say Y here to add support for rotary encoders connected to GPIO lines. Check file:Documentation/input/rotary-encoder.txt for more @@ -484,7 +484,7 @@ config INPUT_GPIO_ROTARY_ENCODER config INPUT_RB532_BUTTON tristate "Mikrotik Routerboard 532 button interface" depends on MIKROTIK_RB532 - depends on GPIOLIB && GENERIC_GPIO + depends on GPIOLIB select INPUT_POLLDEV help Say Y here if you want support for the S1 button built into diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig index 802bd6a..effa9c5 100644 --- a/drivers/input/mouse/Kconfig +++ b/drivers/input/mouse/Kconfig @@ -295,7 +295,7 @@ config MOUSE_VSXXXAA config MOUSE_GPIO tristate "GPIO mouse" - depends on GENERIC_GPIO + depends on GPIOLIB select INPUT_POLLDEV help This driver simulates a mouse on GPIO lines of various CPUs (and some diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index ec50824..2a53177 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -173,7 +173,7 @@ config LEDS_PCA9532_GPIO config LEDS_GPIO tristate "LED Support for GPIO connected LEDs" depends on LEDS_CLASS - depends on GENERIC_GPIO + depends on GPIOLIB help This option enables support for the LEDs connected to GPIO outputs. To be useful the particular board must have LEDs @@ -352,7 +352,7 @@ config LEDS_INTEL_SS4200 config LEDS_LT3593 tristate "LED driver for LT3593 controllers" depends on LEDS_CLASS - depends on GENERIC_GPIO + depends on GPIOLIB help This option enables support for LEDs driven by a Linear Technology LT3593 controller. This controller uses a special one-wire pulse @@ -421,7 +421,7 @@ config LEDS_ASIC3 config LEDS_RENESAS_TPU bool "LED support for Renesas TPU" - depends on LEDS_CLASS=y && HAVE_CLK && GENERIC_GPIO + depends on LEDS_CLASS=y && HAVE_CLK && GPIOLIB help This option enables build of the LED TPU platform driver, suitable to drive any TPU channel on newer Renesas SoCs. diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 3ed17c4..c269383 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -419,7 +419,7 @@ config MTD_BFIN_ASYNC config MTD_GPIO_ADDR tristate "GPIO-assisted Flash Chip Support" - depends on GENERIC_GPIO || GPIOLIB + depends on GPIOLIB depends on MTD_COMPLEX_MAPPINGS help Map driver which allows flashes to be partially physically addressed diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 81bf5e5..5d54ad3 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -89,7 +89,7 @@ config MTD_NAND_H1900 config MTD_NAND_GPIO tristate "GPIO NAND Flash driver" - depends on GENERIC_GPIO && ARM + depends on GPIOLIB && ARM help This enables a GPIO based NAND flash driver. diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 4503452..1e11f2b 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -126,7 +126,7 @@ config MDIO_BITBANG config MDIO_GPIO tristate "Support for GPIO lib-based bitbanged MDIO buses" - depends on MDIO_BITBANG && GENERIC_GPIO + depends on MDIO_BITBANG && GPIOLIB ---help--- Supports GPIO lib-based MDIO busses. diff --git a/drivers/pinctrl/sh-pfc/Kconfig b/drivers/pinctrl/sh-pfc/Kconfig index c3340f5..99ba8e4 100644 --- a/drivers/pinctrl/sh-pfc/Kconfig +++ b/drivers/pinctrl/sh-pfc/Kconfig @@ -6,7 +6,7 @@ if ARCH_SHMOBILE || SUPERH config PINCTRL_SH_PFC # XXX move off the gpio dependency - depends on GENERIC_GPIO + depends on GPIOLIB select GPIO_SH_PFC if ARCH_REQUIRE_GPIOLIB select PINMUX select PINCONF @@ -34,19 +34,19 @@ config PINCTRL_PFC_R8A7779 config PINCTRL_PFC_SH7203 def_bool y depends on CPU_SUBTYPE_SH7203 - depends on GENERIC_GPIO + depends on GPIOLIB select PINCTRL_SH_PFC config PINCTRL_PFC_SH7264 def_bool y depends on CPU_SUBTYPE_SH7264 - depends on GENERIC_GPIO + depends on GPIOLIB select PINCTRL_SH_PFC config PINCTRL_PFC_SH7269 def_bool y depends on CPU_SUBTYPE_SH7269 - depends on GENERIC_GPIO + depends on GPIOLIB select PINCTRL_SH_PFC config PINCTRL_PFC_SH7372 @@ -62,55 +62,55 @@ config PINCTRL_PFC_SH73A0 config PINCTRL_PFC_SH7720 def_bool y depends on CPU_SUBTYPE_SH7720 - depends on GENERIC_GPIO + depends on GPIOLIB select PINCTRL_SH_PFC config PINCTRL_PFC_SH7722 def_bool y depends on CPU_SUBTYPE_SH7722 - depends on GENERIC_GPIO + depends on GPIOLIB select PINCTRL_SH_PFC config PINCTRL_PFC_SH7723 def_bool y depends on CPU_SUBTYPE_SH7723 - depends on GENERIC_GPIO + depends on GPIOLIB select PINCTRL_SH_PFC config PINCTRL_PFC_SH7724 def_bool y depends on CPU_SUBTYPE_SH7724 - depends on GENERIC_GPIO + depends on GPIOLIB select PINCTRL_SH_PFC config PINCTRL_PFC_SH7734 def_bool y depends on CPU_SUBTYPE_SH7734 - depends on GENERIC_GPIO + depends on GPIOLIB select PINCTRL_SH_PFC config PINCTRL_PFC_SH7757 def_bool y depends on CPU_SUBTYPE_SH7757 - depends on GENERIC_GPIO + depends on GPIOLIB select PINCTRL_SH_PFC config PINCTRL_PFC_SH7785 def_bool y depends on CPU_SUBTYPE_SH7785 - depends on GENERIC_GPIO + depends on GPIOLIB select PINCTRL_SH_PFC config PINCTRL_PFC_SH7786 def_bool y depends on CPU_SUBTYPE_SH7786 - depends on GENERIC_GPIO + depends on GPIOLIB select PINCTRL_SH_PFC config PINCTRL_PFC_SHX3 def_bool y depends on CPU_SUBTYPE_SHX3 - depends on GENERIC_GPIO + depends on GPIOLIB select PINCTRL_SH_PFC endif diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index a5d97ea..8bb2644 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -66,7 +66,7 @@ config REGULATOR_USERSPACE_CONSUMER config REGULATOR_GPIO tristate "GPIO regulator support" - depends on GENERIC_GPIO + depends on GPIOLIB help This driver provides support for regulators that can be controlled via gpios. diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index f80eee7..134b6f3 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -61,7 +61,7 @@ config SPI_ALTERA config SPI_ATH79 tristate "Atheros AR71XX/AR724X/AR913X SPI controller driver" - depends on ATH79 && GENERIC_GPIO + depends on ATH79 && GPIOLIB select SPI_BITBANG help This enables support for the SPI controller present on the @@ -163,7 +163,7 @@ config SPI_FALCON config SPI_GPIO tristate "GPIO-based bitbanging SPI Master" - depends on GENERIC_GPIO + depends on GPIOLIB select SPI_BITBANG help This simple GPIO bitbanging SPI master uses the arch-neutral GPIO @@ -240,7 +240,7 @@ config SPI_FSL_ESPI config SPI_OC_TINY tristate "OpenCores tiny SPI" - depends on GENERIC_GPIO + depends on GPIOLIB select SPI_BITBANG help This is the driver for OpenCores tiny SPI master controller. @@ -430,7 +430,7 @@ config SPI_TOPCLIFF_PCH config SPI_TXX9 tristate "Toshiba TXx9 SPI controller" - depends on GENERIC_GPIO && CPU_TX49XX + depends on GPIOLIB && CPU_TX49XX help SPI driver for Toshiba TXx9 MIPS SoCs diff --git a/drivers/staging/android/Kconfig b/drivers/staging/android/Kconfig index 465a28c..9feb6ff 100644 --- a/drivers/staging/android/Kconfig +++ b/drivers/staging/android/Kconfig @@ -54,7 +54,7 @@ config ANDROID_TIMED_OUTPUT config ANDROID_TIMED_GPIO tristate "Android timed gpio driver" - depends on GENERIC_GPIO && ANDROID_TIMED_OUTPUT + depends on GPIOLIB && ANDROID_TIMED_OUTPUT default n config ANDROID_LOW_MEMORY_KILLER diff --git a/drivers/staging/iio/accel/Kconfig b/drivers/staging/iio/accel/Kconfig index e2e786d..ad45dfb 100644 --- a/drivers/staging/iio/accel/Kconfig +++ b/drivers/staging/iio/accel/Kconfig @@ -61,7 +61,7 @@ config LIS3L02DQ depends on SPI select IIO_TRIGGER if IIO_BUFFER depends on !IIO_BUFFER || IIO_KFIFO_BUF - depends on GENERIC_GPIO + depends on GPIOLIB help Say yes here to build SPI support for the ST microelectronics accelerometer. The driver supplies direct access via sysfs files diff --git a/drivers/staging/iio/adc/Kconfig b/drivers/staging/iio/adc/Kconfig index 7b2a01d..a48eee1 100644 --- a/drivers/staging/iio/adc/Kconfig +++ b/drivers/staging/iio/adc/Kconfig @@ -73,7 +73,7 @@ config AD7780 config AD7816 tristate "Analog Devices AD7816/7/8 temperature sensor and ADC driver" depends on SPI - depends on GENERIC_GPIO + depends on GPIOLIB help Say yes here to build support for Analog Devices AD7816/7/8 temperature sensors and ADC. diff --git a/drivers/staging/iio/addac/Kconfig b/drivers/staging/iio/addac/Kconfig index 698a897..e6795e0 100644 --- a/drivers/staging/iio/addac/Kconfig +++ b/drivers/staging/iio/addac/Kconfig @@ -5,7 +5,7 @@ menu "Analog digital bi-direction converters" config ADT7316 tristate "Analog Devices ADT7316/7/8 ADT7516/7/9 temperature sensor, ADC and DAC driver" - depends on GENERIC_GPIO + depends on GPIOLIB help Say yes here to build support for Analog Devices ADT7316, ADT7317, ADT7318 and ADT7516, ADT7517, ADT7519 temperature sensors, ADC and DAC. diff --git a/drivers/staging/iio/resolver/Kconfig b/drivers/staging/iio/resolver/Kconfig index 49f69ef..ce360f1 100644 --- a/drivers/staging/iio/resolver/Kconfig +++ b/drivers/staging/iio/resolver/Kconfig @@ -13,7 +13,7 @@ config AD2S90 config AD2S1200 tristate "Analog Devices ad2s1200/ad2s1205 driver" depends on SPI - depends on GENERIC_GPIO + depends on GPIOLIB help Say yes here to build support for Analog Devices spi resolver to digital converters, ad2s1200 and ad2s1205, provides direct access @@ -22,7 +22,7 @@ config AD2S1200 config AD2S1210 tristate "Analog Devices ad2s1210 driver" depends on SPI - depends on GENERIC_GPIO + depends on GPIOLIB help Say yes here to build support for Analog Devices spi resolver to digital converters, ad2s1210, provides direct access via sysfs. diff --git a/drivers/staging/iio/trigger/Kconfig b/drivers/staging/iio/trigger/Kconfig index d44d3ad..1a051da 100644 --- a/drivers/staging/iio/trigger/Kconfig +++ b/drivers/staging/iio/trigger/Kconfig @@ -14,7 +14,7 @@ config IIO_PERIODIC_RTC_TRIGGER config IIO_GPIO_TRIGGER tristate "GPIO trigger" - depends on GENERIC_GPIO + depends on GPIOLIB help Provides support for using GPIO pins as IIO triggers. diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig index 37962c9..8377868 100644 --- a/drivers/usb/otg/Kconfig +++ b/drivers/usb/otg/Kconfig @@ -19,7 +19,7 @@ if USB || USB_GADGET # config USB_GPIO_VBUS tristate "GPIO based peripheral-only VBUS sensing 'transceiver'" - depends on GENERIC_GPIO + depends on GPIOLIB select USB_OTG_UTILS help Provides simple GPIO VBUS sensing for controllers with an diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 4c1546f..df9c738 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -2481,7 +2481,7 @@ config FB_SSD1307 tristate "Solomon SSD1307 framebuffer support" depends on FB && I2C depends on OF - depends on GENERIC_GPIO + depends on GPIOLIB select FB_SYS_FOPS select FB_SYS_FILLRECT select FB_SYS_COPYAREA diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig index db10d01..b83d155 100644 --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig @@ -36,14 +36,14 @@ config LCD_CORGI config LCD_L4F00242T03 tristate "Epson L4F00242T03 LCD" - depends on SPI_MASTER && GENERIC_GPIO + depends on SPI_MASTER && GPIOLIB help SPI driver for Epson L4F00242T03. This provides basic support for init and powering the LCD up/down through a sysfs interface. config LCD_LMS283GF05 tristate "Samsung LMS283GF05 LCD" - depends on SPI_MASTER && GENERIC_GPIO + depends on SPI_MASTER && GPIOLIB help SPI driver for Samsung LMS283GF05. This provides basic support for powering the LCD up/down through a sysfs interface. diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig index e8ca63a..2bd1257 100644 --- a/drivers/w1/masters/Kconfig +++ b/drivers/w1/masters/Kconfig @@ -50,7 +50,7 @@ config W1_MASTER_DS1WM config W1_MASTER_GPIO tristate "GPIO 1-wire busmaster" - depends on GENERIC_GPIO + depends on GPIOLIB help Say Y here if you want to communicate with your 1-wire devices using GPIO pins. This driver uses the GPIO API to control the wire. diff --git a/include/linux/gpio.h b/include/linux/gpio.h index f6c7ae3..552e3f4 100644 --- a/include/linux/gpio.h +++ b/include/linux/gpio.h @@ -39,7 +39,7 @@ struct gpio { const char *label; }; -#ifdef CONFIG_GENERIC_GPIO +#ifdef CONFIG_GPIOLIB #ifdef CONFIG_ARCH_HAVE_CUSTOM_GPIO_H #include @@ -74,7 +74,7 @@ static inline int irq_to_gpio(unsigned int irq) #endif /* ! CONFIG_ARCH_HAVE_CUSTOM_GPIO_H */ -#else /* ! CONFIG_GENERIC_GPIO */ +#else /* ! CONFIG_GPIOLIB */ #include #include @@ -226,7 +226,7 @@ gpiochip_remove_pin_ranges(struct gpio_chip *chip) WARN_ON(1); } -#endif /* ! CONFIG_GENERIC_GPIO */ +#endif /* ! CONFIG_GPIOLIB */ struct device; -- cgit v0.10.2