From 92c9f5018997dbc5f5e91eae2400d78ada2760b0 Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Fri, 11 Dec 2009 16:16:31 -0800 Subject: omap2: mux: intoduce omap_mux_{read,write} intoduce omap_mux_{read,write} Signed-off-by: Mike Rapoport Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index c18a94e..64250c5 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -35,7 +35,27 @@ #ifdef CONFIG_OMAP_MUX +#define OMAP_MUX_BASE_OFFSET 0x30 /* Offset from CTRL_BASE */ +#define OMAP_MUX_BASE_SZ 0x5ca + static struct omap_mux_cfg arch_mux_cfg; +static void __iomem *mux_base; + +static inline u16 omap_mux_read(u16 reg) +{ + if (cpu_is_omap24xx()) + return __raw_readb(mux_base + reg); + else + return __raw_readw(mux_base + reg); +} + +static inline void omap_mux_write(u16 val, u16 reg) +{ + if (cpu_is_omap24xx()) + __raw_writeb(val, mux_base + reg); + else + __raw_writew(val, mux_base + reg); +} /* NOTE: See mux.h for the enumeration */ @@ -581,10 +601,7 @@ static void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u16 r u16 orig; u8 warn = 0, debug = 0; - if (cpu_is_omap24xx()) - orig = omap_ctrl_readb(cfg->mux_reg); - else - orig = omap_ctrl_readw(cfg->mux_reg); + orig = omap_mux_read(cfg->mux_reg - OMAP_MUX_BASE_OFFSET); #ifdef CONFIG_OMAP_MUX_DEBUG debug = cfg->debug; @@ -614,7 +631,7 @@ static int __init_or_module omap24xx_cfg_reg(const struct pin_config *cfg) if (cfg->pu_pd_val) reg |= OMAP2_PULL_UP; omap2_cfg_debug(cfg, reg); - omap_ctrl_writeb(reg, cfg->mux_reg); + omap_mux_write(reg, cfg->mux_reg - OMAP_MUX_BASE_OFFSET); spin_unlock_irqrestore(&mux_spin_lock, flags); return 0; @@ -633,7 +650,7 @@ static int __init_or_module omap34xx_cfg_reg(const struct pin_config *cfg) spin_lock_irqsave(&mux_spin_lock, flags); reg |= cfg->mux_val; omap2_cfg_debug(cfg, reg); - omap_ctrl_writew(reg, cfg->mux_reg); + omap_mux_write(reg, cfg->mux_reg - OMAP_MUX_BASE_OFFSET); spin_unlock_irqrestore(&mux_spin_lock, flags); return 0; @@ -644,6 +661,21 @@ static int __init_or_module omap34xx_cfg_reg(const struct pin_config *cfg) int __init omap2_mux_init(void) { + u32 mux_pbase; + + if (cpu_is_omap2420()) + mux_pbase = OMAP2420_CTRL_BASE + OMAP_MUX_BASE_OFFSET; + else if (cpu_is_omap2430()) + mux_pbase = OMAP243X_CTRL_BASE + OMAP_MUX_BASE_OFFSET; + else if (cpu_is_omap34xx()) + mux_pbase = OMAP343X_CTRL_BASE + OMAP_MUX_BASE_OFFSET; + + mux_base = ioremap(mux_pbase, OMAP_MUX_BASE_SZ); + if (!mux_base) { + printk(KERN_ERR "mux: Could not ioremap\n"); + return -ENODEV; + } + if (cpu_is_omap24xx()) { arch_mux_cfg.pins = omap24xx_pins; arch_mux_cfg.size = OMAP24XX_PINS_SZ; -- cgit v0.10.2 From 15ac7afe515631ec36966b1cf632a87276536f57 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 11 Dec 2009 16:16:32 -0800 Subject: omap: mux: Add new style pin multiplexing code for omap3 Initially only for 34xx. This code allows us to: - Make the code more generic as the omap internal signal names can stay the same across omap generations for some devices - Map mux registers to GPIO registers that is needed for dynamic muxing of pins during off-idle - Override bootloader mux values via kernel cmdline using omap_mux=some.signa1=0x1234,some.signal2=0x1234 - View and set the mux registers via debugfs if CONFIG_DEBUG_FS is enabled Cc: Mike Rapoport Cc: Benoit Cousson Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 777dc8a..4f62fcb 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1787,6 +1787,11 @@ and is between 256 and 4096 characters. It is defined in the file waiting for the ACK, so if this is set too high interrupts *may* be lost! + omap_mux= [OMAP] Override bootloader pin multiplexing. + Format: ... + For example, to override I2C bus2: + omap_mux=i2c2_scl.i2c2_scl=0x100,i2c2_sda.i2c2_sda=0x100 + opl3= [HW,OSS] Format: diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 64250c5..b082b50 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -27,18 +27,23 @@ #include #include #include +#include #include #include #include -#ifdef CONFIG_OMAP_MUX +#include "mux.h" #define OMAP_MUX_BASE_OFFSET 0x30 /* Offset from CTRL_BASE */ #define OMAP_MUX_BASE_SZ 0x5ca -static struct omap_mux_cfg arch_mux_cfg; +struct omap_mux_entry { + struct omap_mux mux; + struct list_head node; +}; + static void __iomem *mux_base; static inline u16 omap_mux_read(u16 reg) @@ -57,6 +62,10 @@ static inline void omap_mux_write(u16 val, u16 reg) __raw_writew(val, mux_base + reg); } +#ifdef CONFIG_OMAP_MUX + +static struct omap_mux_cfg arch_mux_cfg; + /* NOTE: See mux.h for the enumeration */ #ifdef CONFIG_ARCH_OMAP24XX @@ -667,8 +676,8 @@ int __init omap2_mux_init(void) mux_pbase = OMAP2420_CTRL_BASE + OMAP_MUX_BASE_OFFSET; else if (cpu_is_omap2430()) mux_pbase = OMAP243X_CTRL_BASE + OMAP_MUX_BASE_OFFSET; - else if (cpu_is_omap34xx()) - mux_pbase = OMAP343X_CTRL_BASE + OMAP_MUX_BASE_OFFSET; + else + return -ENODEV; mux_base = ioremap(mux_pbase, OMAP_MUX_BASE_SZ); if (!mux_base) { @@ -689,4 +698,431 @@ int __init omap2_mux_init(void) return omap_mux_register(&arch_mux_cfg); } +#endif /* CONFIG_OMAP_MUX */ + +/*----------------------------------------------------------------------------*/ + +#ifdef CONFIG_ARCH_OMAP34XX + +static LIST_HEAD(muxmodes); +static DEFINE_MUTEX(muxmode_mutex); + +#ifdef CONFIG_OMAP_MUX + +static char *omap_mux_options; + +int __init omap_mux_init_gpio(int gpio, int val) +{ + struct omap_mux_entry *e; + int found = 0; + + if (!gpio) + return -EINVAL; + + list_for_each_entry(e, &muxmodes, node) { + struct omap_mux *m = &e->mux; + if (gpio == m->gpio) { + u16 old_mode; + u16 mux_mode; + + old_mode = omap_mux_read(m->reg_offset); + mux_mode = val & ~(OMAP_MUX_NR_MODES - 1); + mux_mode |= OMAP_MUX_MODE4; + printk(KERN_DEBUG "mux: Setting signal " + "%s.gpio%i 0x%04x -> 0x%04x\n", + m->muxnames[0], gpio, old_mode, mux_mode); + omap_mux_write(mux_mode, m->reg_offset); + found++; + } + } + + if (found == 1) + return 0; + + if (found > 1) { + printk(KERN_ERR "mux: Multiple gpio paths for gpio%i\n", gpio); + return -EINVAL; + } + + printk(KERN_ERR "mux: Could not set gpio%i\n", gpio); + + return -ENODEV; +} + +int __init omap_mux_init_signal(char *muxname, int val) +{ + struct omap_mux_entry *e; + char *m0_name = NULL, *mode_name = NULL; + int found = 0; + + mode_name = strchr(muxname, '.'); + if (mode_name) { + *mode_name = '\0'; + mode_name++; + m0_name = muxname; + } else { + mode_name = muxname; + } + + list_for_each_entry(e, &muxmodes, node) { + struct omap_mux *m = &e->mux; + char *m0_entry = m->muxnames[0]; + int i; + + if (m0_name && strcmp(m0_name, m0_entry)) + continue; + + for (i = 0; i < OMAP_MUX_NR_MODES; i++) { + char *mode_cur = m->muxnames[i]; + + if (!mode_cur) + continue; + + if (!strcmp(mode_name, mode_cur)) { + u16 old_mode; + u16 mux_mode; + + old_mode = omap_mux_read(m->reg_offset); + mux_mode = val | i; + printk(KERN_DEBUG "mux: Setting signal " + "%s.%s 0x%04x -> 0x%04x\n", + m0_entry, muxname, old_mode, mux_mode); + omap_mux_write(mux_mode, m->reg_offset); + found++; + } + } + } + + if (found == 1) + return 0; + + if (found > 1) { + printk(KERN_ERR "mux: Multiple signal paths (%i) for %s\n", + found, muxname); + return -EINVAL; + } + + printk(KERN_ERR "mux: Could not set signal %s\n", muxname); + + return -ENODEV; +} + +static void __init omap_mux_free_names(struct omap_mux *m) +{ + int i; + + for (i = 0; i < OMAP_MUX_NR_MODES; i++) + kfree(m->muxnames[i]); + +#ifdef CONFIG_DEBUG_FS + for (i = 0; i < OMAP_MUX_NR_SIDES; i++) + kfree(m->balls[i]); +#endif + +} + +/* Free all data except for GPIO pins unless CONFIG_DEBUG_FS is set */ +static int __init omap_mux_late_init(void) +{ + struct omap_mux_entry *e, *tmp; + + list_for_each_entry_safe(e, tmp, &muxmodes, node) { + struct omap_mux *m = &e->mux; + u16 mode = omap_mux_read(m->reg_offset); + + if (OMAP_MODE_GPIO(mode)) + continue; + +#ifndef CONFIG_DEBUG_FS + mutex_lock(&muxmode_mutex); + list_del(&e->node); + mutex_unlock(&muxmode_mutex); + omap_mux_free_names(m); + kfree(m); #endif + + } + + return 0; +} +late_initcall(omap_mux_late_init); + +static void __init omap_mux_package_fixup(struct omap_mux *p, + struct omap_mux *superset) +{ + while (p->reg_offset != OMAP_MUX_TERMINATOR) { + struct omap_mux *s = superset; + int found = 0; + + while (s->reg_offset != OMAP_MUX_TERMINATOR) { + if (s->reg_offset == p->reg_offset) { + *s = *p; + found++; + break; + } + s++; + } + if (!found) + printk(KERN_ERR "mux: Unknown entry offset 0x%x\n", + p->reg_offset); + p++; + } +} + +#ifdef CONFIG_DEBUG_FS + +static void __init omap_mux_package_init_balls(struct omap_ball *b, + struct omap_mux *superset) +{ + while (b->reg_offset != OMAP_MUX_TERMINATOR) { + struct omap_mux *s = superset; + int found = 0; + + while (s->reg_offset != OMAP_MUX_TERMINATOR) { + if (s->reg_offset == b->reg_offset) { + s->balls[0] = b->balls[0]; + s->balls[1] = b->balls[1]; + found++; + break; + } + s++; + } + if (!found) + printk(KERN_ERR "mux: Unknown ball offset 0x%x\n", + b->reg_offset); + b++; + } +} + +#else /* CONFIG_DEBUG_FS */ + +static inline void omap_mux_package_init_balls(struct omap_ball *b, + struct omap_mux *superset) +{ +} + +#endif /* CONFIG_DEBUG_FS */ + +static int __init omap_mux_setup(char *options) +{ + if (!options) + return 0; + + omap_mux_options = options; + + return 1; +} +__setup("omap_mux=", omap_mux_setup); + +/* + * Note that the omap_mux=some.signal1=0x1234,some.signal2=0x1234 + * cmdline options only override the bootloader values. + * During development, please enable CONFIG_DEBUG_FS, and use the + * signal specific entries under debugfs. + */ +static void __init omap_mux_set_cmdline_signals(void) +{ + char *options, *next_opt, *token; + + if (!omap_mux_options) + return; + + options = kmalloc(strlen(omap_mux_options) + 1, GFP_KERNEL); + if (!options) + return; + + strcpy(options, omap_mux_options); + next_opt = options; + + while ((token = strsep(&next_opt, ",")) != NULL) { + char *keyval, *name; + unsigned long val; + + keyval = token; + name = strsep(&keyval, "="); + if (name) { + int res; + + res = strict_strtoul(keyval, 0x10, &val); + if (res < 0) + continue; + + omap_mux_init_signal(name, (u16)val); + } + } + + kfree(options); +} + +static void __init omap_mux_set_board_signals(struct omap_board_mux *board_mux) +{ + while (board_mux->reg_offset != OMAP_MUX_TERMINATOR) { + omap_mux_write(board_mux->value, board_mux->reg_offset); + board_mux++; + } +} + +static int __init omap_mux_copy_names(struct omap_mux *src, + struct omap_mux *dst) +{ + int i; + + for (i = 0; i < OMAP_MUX_NR_MODES; i++) { + if (src->muxnames[i]) { + dst->muxnames[i] = + kmalloc(strlen(src->muxnames[i]) + 1, + GFP_KERNEL); + if (!dst->muxnames[i]) + goto free; + strcpy(dst->muxnames[i], src->muxnames[i]); + } + } + +#ifdef CONFIG_DEBUG_FS + for (i = 0; i < OMAP_MUX_NR_SIDES; i++) { + if (src->balls[i]) { + dst->balls[i] = + kmalloc(strlen(src->balls[i]) + 1, + GFP_KERNEL); + if (!dst->balls[i]) + goto free; + strcpy(dst->balls[i], src->balls[i]); + } + } +#endif + + return 0; + +free: + omap_mux_free_names(dst); + return -ENOMEM; + +} + +#endif /* CONFIG_OMAP_MUX */ + +static u16 omap_mux_get_by_gpio(int gpio) +{ + struct omap_mux_entry *e; + u16 offset = OMAP_MUX_TERMINATOR; + + list_for_each_entry(e, &muxmodes, node) { + struct omap_mux *m = &e->mux; + if (m->gpio == gpio) { + offset = m->reg_offset; + break; + } + } + + return offset; +} + +/* Needed for dynamic muxing of GPIO pins for off-idle */ +u16 omap_mux_get_gpio(int gpio) +{ + u16 offset; + + offset = omap_mux_get_by_gpio(gpio); + if (offset == OMAP_MUX_TERMINATOR) { + printk(KERN_ERR "mux: Could not get gpio%i\n", gpio); + return offset; + } + + return omap_mux_read(offset); +} + +/* Needed for dynamic muxing of GPIO pins for off-idle */ +void omap_mux_set_gpio(u16 val, int gpio) +{ + u16 offset; + + offset = omap_mux_get_by_gpio(gpio); + if (offset == OMAP_MUX_TERMINATOR) { + printk(KERN_ERR "mux: Could not set gpio%i\n", gpio); + return; + } + + omap_mux_write(val, offset); +} + +static struct omap_mux * __init omap_mux_list_add(struct omap_mux *src) +{ + struct omap_mux_entry *entry; + struct omap_mux *m; + + entry = kzalloc(sizeof(struct omap_mux_entry), GFP_KERNEL); + if (!entry) + return NULL; + + m = &entry->mux; + memcpy(m, src, sizeof(struct omap_mux_entry)); + +#ifdef CONFIG_OMAP_MUX + if (omap_mux_copy_names(src, m)) { + kfree(entry); + return NULL; + } +#endif + + mutex_lock(&muxmode_mutex); + list_add_tail(&entry->node, &muxmodes); + mutex_unlock(&muxmode_mutex); + + return m; +} + +/* + * Note if CONFIG_OMAP_MUX is not selected, we will only initialize + * the GPIO to mux offset mapping that is needed for dynamic muxing + * of GPIO pins for off-idle. + */ +static void __init omap_mux_init_list(struct omap_mux *superset) +{ + while (superset->reg_offset != OMAP_MUX_TERMINATOR) { + struct omap_mux *entry; + +#ifndef CONFIG_OMAP_MUX + /* Skip pins that are not muxed as GPIO by bootloader */ + if (!OMAP_MODE_GPIO(omap_mux_read(superset->reg_offset))) { + superset++; + continue; + } +#endif + + entry = omap_mux_list_add(superset); + if (!entry) { + printk(KERN_ERR "mux: Could not add entry\n"); + return; + } + superset++; + } +} + +int __init omap_mux_init(u32 mux_pbase, u32 mux_size, + struct omap_mux *superset, + struct omap_mux *package_subset, + struct omap_board_mux *board_mux, + struct omap_ball *package_balls) +{ + if (mux_base) + return -EBUSY; + + mux_base = ioremap(mux_pbase, mux_size); + if (!mux_base) { + printk(KERN_ERR "mux: Could not ioremap\n"); + return -ENODEV; + } + +#ifdef CONFIG_OMAP_MUX + omap_mux_package_fixup(package_subset, superset); + omap_mux_package_init_balls(package_balls, superset); + omap_mux_set_cmdline_signals(); + omap_mux_set_board_signals(board_mux); +#endif + + omap_mux_init_list(superset); + + return 0; +} + +#endif /* CONFIG_ARCH_OMAP34XX */ diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h new file mode 100644 index 0000000..bebe9cc --- /dev/null +++ b/arch/arm/mach-omap2/mux.h @@ -0,0 +1,160 @@ +/* + * Copyright (C) 2009 Nokia + * Copyright (C) 2009 Texas Instruments + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define OMAP_MUX_TERMINATOR 0xffff + +/* 34xx mux mode options for each pin. See TRM for options */ +#define OMAP_MUX_MODE0 0 +#define OMAP_MUX_MODE1 1 +#define OMAP_MUX_MODE2 2 +#define OMAP_MUX_MODE3 3 +#define OMAP_MUX_MODE4 4 +#define OMAP_MUX_MODE5 5 +#define OMAP_MUX_MODE6 6 +#define OMAP_MUX_MODE7 7 + +/* 24xx/34xx mux bit defines */ +#define OMAP_PULL_ENA (1 << 3) +#define OMAP_PULL_UP (1 << 4) +#define OMAP_ALTELECTRICALSEL (1 << 5) + +/* 34xx specific mux bit defines */ +#define OMAP_INPUT_EN (1 << 8) +#define OMAP_OFF_EN (1 << 9) +#define OMAP_OFFOUT_EN (1 << 10) +#define OMAP_OFFOUT_VAL (1 << 11) +#define OMAP_OFF_PULL_EN (1 << 12) +#define OMAP_OFF_PULL_UP (1 << 13) +#define OMAP_WAKEUP_EN (1 << 14) + +/* Active pin states */ +#define OMAP_PIN_OUTPUT 0 +#define OMAP_PIN_INPUT OMAP_INPUT_EN +#define OMAP_PIN_INPUT_PULLUP (OMAP_PULL_ENA | OMAP_INPUT_EN \ + | OMAP_PULL_UP) +#define OMAP_PIN_INPUT_PULLDOWN (OMAP_PULL_ENA | OMAP_INPUT_EN) + +/* Off mode states */ +#define OMAP_PIN_OFF_NONE 0 +#define OMAP_PIN_OFF_OUTPUT_HIGH (OMAP_OFF_EN | OMAP_OFFOUT_EN \ + | OMAP_OFFOUT_VAL) +#define OMAP_PIN_OFF_OUTPUT_LOW (OMAP_OFF_EN | OMAP_OFFOUT_EN) +#define OMAP_PIN_OFF_INPUT_PULLUP (OMAP_OFF_EN | OMAP_OFF_PULL_EN \ + | OMAP_OFF_PULL_UP) +#define OMAP_PIN_OFF_INPUT_PULLDOWN (OMAP_OFF_EN | OMAP_OFF_PULL_EN) +#define OMAP_PIN_OFF_WAKEUPENABLE OMAP_WAKEUP_EN + +#define OMAP_MODE_GPIO(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE4) + +/* Flags for omap_mux_init */ +#define OMAP_PACKAGE_MASK 0xffff +#define OMAP_PACKAGE_CUS 3 /* 423-pin 0.65 */ +#define OMAP_PACKAGE_CBB 2 /* 515-pin 0.40 0.50 */ +#define OMAP_PACKAGE_CBC 1 /* 515-pin 0.50 0.65 */ + + +#define OMAP_MUX_NR_MODES 8 /* Available modes */ +#define OMAP_MUX_NR_SIDES 2 /* Bottom & top */ + +/** + * struct omap_mux - data for omap mux register offset and it's value + * @reg_offset: mux register offset from the mux base + * @gpio: GPIO number + * @muxnames: available signal modes for a ball + */ +struct omap_mux { + u16 reg_offset; + u16 gpio; +#ifdef CONFIG_OMAP_MUX + char *muxnames[OMAP_MUX_NR_MODES]; +#ifdef CONFIG_DEBUG_FS + char *balls[OMAP_MUX_NR_SIDES]; +#endif +#endif +}; + +/** + * struct omap_ball - data for balls on omap package + * @reg_offset: mux register offset from the mux base + * @balls: available balls on the package + */ +struct omap_ball { + u16 reg_offset; + char *balls[OMAP_MUX_NR_SIDES]; +}; + +/** + * struct omap_board_mux - data for initializing mux registers + * @reg_offset: mux register offset from the mux base + * @mux_value: desired mux value to set + */ +struct omap_board_mux { + u16 reg_offset; + u16 value; +}; + +#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_ARCH_OMAP34XX) + +/** + * omap_mux_init_gpio - initialize a signal based on the GPIO number + * @gpio: GPIO number + * @val: Options for the mux register value + */ +int omap_mux_init_gpio(int gpio, int val); + +/** + * omap_mux_init_signal - initialize a signal based on the signal name + * @muxname: Mux name in mode0_name.signal_name format + * @val: Options for the mux register value + */ +int omap_mux_init_signal(char *muxname, int val); + +#else + +static inline int omap_mux_init_gpio(int gpio, int val) +{ + return 0; +} +static inline int omap_mux_init_signal(char *muxname, int val) +{ + return 0; +} + +#endif + +/** + * omap_mux_get_gpio() - get mux register value based on GPIO number + * @gpio: GPIO number + * + */ +u16 omap_mux_get_gpio(int gpio); + +/** + * omap_mux_set_gpio() - set mux register value based on GPIO number + * @val: New mux register value + * @gpio: GPIO number + * + */ +void omap_mux_set_gpio(u16 val, int gpio); + +/** + * omap3_mux_init() - initialize mux system with board specific set + * @board_mux: Board specific mux table + * @flags: OMAP package type used for the board + */ +int omap3_mux_init(struct omap_board_mux *board_mux, int flags); + +/** + * omap_mux_init - private mux init function, do not call + */ +int omap_mux_init(u32 mux_pbase, u32 mux_size, + struct omap_mux *superset, + struct omap_mux *package_subset, + struct omap_board_mux *board_mux, + struct omap_ball *package_balls); diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c index 05aebca..0670363 100644 --- a/arch/arm/plat-omap/mux.c +++ b/arch/arm/plat-omap/mux.c @@ -54,8 +54,12 @@ int __init_or_module omap_cfg_reg(const unsigned long index) { struct pin_config *reg; - if (cpu_is_omap44xx()) - return 0; + if (cpu_is_omap34xx() || cpu_is_omap44xx()) { + printk(KERN_ERR "mux: Broken omap_cfg_reg(%lu) entry\n", + index); + WARN_ON(1); + return -EINVAL; + } if (mux_cfg == NULL) { printk(KERN_ERR "Pin mux table not initialized\n"); -- cgit v0.10.2 From ddaa912a2164d7ce7a03fcb384ed37e712bb4549 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 11 Dec 2009 16:16:32 -0800 Subject: omap: mux: Add new style pin multiplexing data for 34xx Add new style mux data for 34xx. This should also work with 3630 easily by adding the processor subset and ball data. Note that this data is __initdata, and gets optimized out except for the GPIO pins if CONFIG_OMAP_MUX is not set. Also note that this data uses omap3630 naming for the SDMMC registers instead of 34xx naming with just MMC. Cc: Benoit Cousson Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 0cd25ce..7da18f0 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -24,6 +24,15 @@ config ARCH_OMAP3430 depends on ARCH_OMAP3 && ARCH_OMAP34XX select ARCH_OMAP_OTG +config OMAP_PACKAGE_CBC + bool + +config OMAP_PACKAGE_CBB + bool + +config OMAP_PACKAGE_CUS + bool + comment "OMAP Board Type" depends on ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 10c0539..6e348e5 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -26,6 +26,9 @@ obj-$(CONFIG_ARCH_OMAP2420) += sram242x.o obj-$(CONFIG_ARCH_OMAP2430) += sram243x.o obj-$(CONFIG_ARCH_OMAP3) += sram34xx.o +# Pin multiplexing +obj-$(CONFIG_ARCH_OMAP3) += mux34xx.o + # SMS/SDRC obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o # obj-$(CONFIG_ARCH_OMAP3) += sdrc3xxx.o diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h index bebe9cc..a6bd58f 100644 --- a/arch/arm/mach-omap2/mux.h +++ b/arch/arm/mach-omap2/mux.h @@ -7,6 +7,8 @@ * published by the Free Software Foundation. */ +#include "mux34xx.h" + #define OMAP_MUX_TERMINATOR 0xffff /* 34xx mux mode options for each pin. See TRM for options */ diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c new file mode 100644 index 0000000..116d5b2 --- /dev/null +++ b/arch/arm/mach-omap2/mux34xx.c @@ -0,0 +1,1579 @@ +/* + * Copyright (C) 2009 Nokia + * Copyright (C) 2009 Texas Instruments + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include + +#include "mux.h" + +#ifdef CONFIG_OMAP_MUX + +#define _OMAP3_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7) \ +{ \ + .reg_offset = (OMAP3_CONTROL_PADCONF_##M0##_OFFSET), \ + .gpio = (g), \ + .muxnames = { m0, m1, m2, m3, m4, m5, m6, m7 }, \ +} + +#else + +#define _OMAP3_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7) \ +{ \ + .reg_offset = (OMAP3_CONTROL_PADCONF_##M0##_OFFSET), \ + .gpio = (g), \ +} + +#endif + +#define _OMAP3_BALLENTRY(M0, bb, bt) \ +{ \ + .reg_offset = (OMAP3_CONTROL_PADCONF_##M0##_OFFSET), \ + .balls = { bb, bt }, \ +} + +/* + * Superset of all mux modes for omap3 + */ +static struct omap_mux __initdata omap3_muxmodes[] = { + _OMAP3_MUXENTRY(CAM_D0, 99, + "cam_d0", NULL, NULL, NULL, + "gpio_99", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D1, 100, + "cam_d1", NULL, NULL, NULL, + "gpio_100", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D10, 109, + "cam_d10", NULL, NULL, NULL, + "gpio_109", "hw_dbg8", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D11, 110, + "cam_d11", NULL, NULL, NULL, + "gpio_110", "hw_dbg9", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D2, 101, + "cam_d2", NULL, NULL, NULL, + "gpio_101", "hw_dbg4", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D3, 102, + "cam_d3", NULL, NULL, NULL, + "gpio_102", "hw_dbg5", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D4, 103, + "cam_d4", NULL, NULL, NULL, + "gpio_103", "hw_dbg6", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D5, 104, + "cam_d5", NULL, NULL, NULL, + "gpio_104", "hw_dbg7", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D6, 105, + "cam_d6", NULL, NULL, NULL, + "gpio_105", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D7, 106, + "cam_d7", NULL, NULL, NULL, + "gpio_106", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D8, 107, + "cam_d8", NULL, NULL, NULL, + "gpio_107", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D9, 108, + "cam_d9", NULL, NULL, NULL, + "gpio_108", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_FLD, 98, + "cam_fld", NULL, "cam_global_reset", NULL, + "gpio_98", "hw_dbg3", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_HS, 94, + "cam_hs", NULL, NULL, NULL, + "gpio_94", "hw_dbg0", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_PCLK, 97, + "cam_pclk", NULL, NULL, NULL, + "gpio_97", "hw_dbg2", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_STROBE, 126, + "cam_strobe", NULL, NULL, NULL, + "gpio_126", "hw_dbg11", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_VS, 95, + "cam_vs", NULL, NULL, NULL, + "gpio_95", "hw_dbg1", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_WEN, 167, + "cam_wen", NULL, "cam_shutter", NULL, + "gpio_167", "hw_dbg10", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_XCLKA, 96, + "cam_xclka", NULL, NULL, NULL, + "gpio_96", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_XCLKB, 111, + "cam_xclkb", NULL, NULL, NULL, + "gpio_111", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CSI2_DX0, 112, + "csi2_dx0", NULL, NULL, NULL, + "gpio_112", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CSI2_DX1, 114, + "csi2_dx1", NULL, NULL, NULL, + "gpio_114", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CSI2_DY0, 113, + "csi2_dy0", NULL, NULL, NULL, + "gpio_113", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CSI2_DY1, 115, + "csi2_dy1", NULL, NULL, NULL, + "gpio_115", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_ACBIAS, 69, + "dss_acbias", NULL, NULL, NULL, + "gpio_69", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA0, 70, + "dss_data0", NULL, "uart1_cts", NULL, + "gpio_70", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA1, 71, + "dss_data1", NULL, "uart1_rts", NULL, + "gpio_71", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA10, 80, + "dss_data10", NULL, NULL, NULL, + "gpio_80", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA11, 81, + "dss_data11", NULL, NULL, NULL, + "gpio_81", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA12, 82, + "dss_data12", NULL, NULL, NULL, + "gpio_82", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA13, 83, + "dss_data13", NULL, NULL, NULL, + "gpio_83", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA14, 84, + "dss_data14", NULL, NULL, NULL, + "gpio_84", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA15, 85, + "dss_data15", NULL, NULL, NULL, + "gpio_85", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA16, 86, + "dss_data16", NULL, NULL, NULL, + "gpio_86", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA17, 87, + "dss_data17", NULL, NULL, NULL, + "gpio_87", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA18, 88, + "dss_data18", NULL, "mcspi3_clk", "dss_data0", + "gpio_88", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA19, 89, + "dss_data19", NULL, "mcspi3_simo", "dss_data1", + "gpio_89", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA20, 90, + "dss_data20", NULL, "mcspi3_somi", "dss_data2", + "gpio_90", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA21, 91, + "dss_data21", NULL, "mcspi3_cs0", "dss_data3", + "gpio_91", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA22, 92, + "dss_data22", NULL, "mcspi3_cs1", "dss_data4", + "gpio_92", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA23, 93, + "dss_data23", NULL, NULL, "dss_data5", + "gpio_93", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA2, 72, + "dss_data2", NULL, NULL, NULL, + "gpio_72", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA3, 73, + "dss_data3", NULL, NULL, NULL, + "gpio_73", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA4, 74, + "dss_data4", NULL, "uart3_rx_irrx", NULL, + "gpio_74", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA5, 75, + "dss_data5", NULL, "uart3_tx_irtx", NULL, + "gpio_75", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA6, 76, + "dss_data6", NULL, "uart1_tx", NULL, + "gpio_76", "hw_dbg14", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA7, 77, + "dss_data7", NULL, "uart1_rx", NULL, + "gpio_77", "hw_dbg15", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA8, 78, + "dss_data8", NULL, NULL, NULL, + "gpio_78", "hw_dbg16", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA9, 79, + "dss_data9", NULL, NULL, NULL, + "gpio_79", "hw_dbg17", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_HSYNC, 67, + "dss_hsync", NULL, NULL, NULL, + "gpio_67", "hw_dbg13", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_PCLK, 66, + "dss_pclk", NULL, NULL, NULL, + "gpio_66", "hw_dbg12", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_VSYNC, 68, + "dss_vsync", NULL, NULL, NULL, + "gpio_68", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(ETK_CLK, 12, + "etk_clk", "mcbsp5_clkx", "sdmmc3_clk", "hsusb1_stp", + "gpio_12", "mm1_rxdp", "hsusb1_tll_stp", "hw_dbg0"), + _OMAP3_MUXENTRY(ETK_CTL, 13, + "etk_ctl", NULL, "sdmmc3_cmd", "hsusb1_clk", + "gpio_13", NULL, "hsusb1_tll_clk", "hw_dbg1"), + _OMAP3_MUXENTRY(ETK_D0, 14, + "etk_d0", "mcspi3_simo", "sdmmc3_dat4", "hsusb1_data0", + "gpio_14", "mm1_rxrcv", "hsusb1_tll_data0", "hw_dbg2"), + _OMAP3_MUXENTRY(ETK_D1, 15, + "etk_d1", "mcspi3_somi", NULL, "hsusb1_data1", + "gpio_15", "mm1_txse0", "hsusb1_tll_data1", "hw_dbg3"), + _OMAP3_MUXENTRY(ETK_D10, 24, + "etk_d10", NULL, "uart1_rx", "hsusb2_clk", + "gpio_24", NULL, "hsusb2_tll_clk", "hw_dbg12"), + _OMAP3_MUXENTRY(ETK_D11, 25, + "etk_d11", NULL, NULL, "hsusb2_stp", + "gpio_25", "mm2_rxdp", "hsusb2_tll_stp", "hw_dbg13"), + _OMAP3_MUXENTRY(ETK_D12, 26, + "etk_d12", NULL, NULL, "hsusb2_dir", + "gpio_26", NULL, "hsusb2_tll_dir", "hw_dbg14"), + _OMAP3_MUXENTRY(ETK_D13, 27, + "etk_d13", NULL, NULL, "hsusb2_nxt", + "gpio_27", "mm2_rxdm", "hsusb2_tll_nxt", "hw_dbg15"), + _OMAP3_MUXENTRY(ETK_D14, 28, + "etk_d14", NULL, NULL, "hsusb2_data0", + "gpio_28", "mm2_rxrcv", "hsusb2_tll_data0", "hw_dbg16"), + _OMAP3_MUXENTRY(ETK_D15, 29, + "etk_d15", NULL, NULL, "hsusb2_data1", + "gpio_29", "mm2_txse0", "hsusb2_tll_data1", "hw_dbg17"), + _OMAP3_MUXENTRY(ETK_D2, 16, + "etk_d2", "mcspi3_cs0", NULL, "hsusb1_data2", + "gpio_16", "mm1_txdat", "hsusb1_tll_data2", "hw_dbg4"), + _OMAP3_MUXENTRY(ETK_D3, 17, + "etk_d3", "mcspi3_clk", "sdmmc3_dat3", "hsusb1_data7", + "gpio_17", NULL, "hsusb1_tll_data7", "hw_dbg5"), + _OMAP3_MUXENTRY(ETK_D4, 18, + "etk_d4", "mcbsp5_dr", "sdmmc3_dat0", "hsusb1_data4", + "gpio_18", NULL, "hsusb1_tll_data4", "hw_dbg6"), + _OMAP3_MUXENTRY(ETK_D5, 19, + "etk_d5", "mcbsp5_fsx", "sdmmc3_dat1", "hsusb1_data5", + "gpio_19", NULL, "hsusb1_tll_data5", "hw_dbg7"), + _OMAP3_MUXENTRY(ETK_D6, 20, + "etk_d6", "mcbsp5_dx", "sdmmc3_dat2", "hsusb1_data6", + "gpio_20", NULL, "hsusb1_tll_data6", "hw_dbg8"), + _OMAP3_MUXENTRY(ETK_D7, 21, + "etk_d7", "mcspi3_cs1", "sdmmc3_dat7", "hsusb1_data3", + "gpio_21", "mm1_txen_n", "hsusb1_tll_data3", "hw_dbg9"), + _OMAP3_MUXENTRY(ETK_D8, 22, + "etk_d8", "sys_drm_msecure", "sdmmc3_dat6", "hsusb1_dir", + "gpio_22", NULL, "hsusb1_tll_dir", "hw_dbg10"), + _OMAP3_MUXENTRY(ETK_D9, 23, + "etk_d9", "sys_secure_indicator", "sdmmc3_dat5", "hsusb1_nxt", + "gpio_23", "mm1_rxdm", "hsusb1_tll_nxt", "hw_dbg11"), + _OMAP3_MUXENTRY(GPMC_A1, 34, + "gpmc_a1", NULL, NULL, NULL, + "gpio_34", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_A10, 43, + "gpmc_a10", "sys_ndmareq3", NULL, NULL, + "gpio_43", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_A2, 35, + "gpmc_a2", NULL, NULL, NULL, + "gpio_35", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_A3, 36, + "gpmc_a3", NULL, NULL, NULL, + "gpio_36", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_A4, 37, + "gpmc_a4", NULL, NULL, NULL, + "gpio_37", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_A5, 38, + "gpmc_a5", NULL, NULL, NULL, + "gpio_38", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_A6, 39, + "gpmc_a6", NULL, NULL, NULL, + "gpio_39", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_A7, 40, + "gpmc_a7", NULL, NULL, NULL, + "gpio_40", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_A8, 41, + "gpmc_a8", NULL, NULL, NULL, + "gpio_41", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_A9, 42, + "gpmc_a9", "sys_ndmareq2", NULL, NULL, + "gpio_42", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_CLK, 59, + "gpmc_clk", NULL, NULL, NULL, + "gpio_59", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_D10, 46, + "gpmc_d10", NULL, NULL, NULL, + "gpio_46", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_D11, 47, + "gpmc_d11", NULL, NULL, NULL, + "gpio_47", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_D12, 48, + "gpmc_d12", NULL, NULL, NULL, + "gpio_48", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_D13, 49, + "gpmc_d13", NULL, NULL, NULL, + "gpio_49", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_D14, 50, + "gpmc_d14", NULL, NULL, NULL, + "gpio_50", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_D15, 51, + "gpmc_d15", NULL, NULL, NULL, + "gpio_51", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_D8, 44, + "gpmc_d8", NULL, NULL, NULL, + "gpio_44", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_D9, 45, + "gpmc_d9", NULL, NULL, NULL, + "gpio_45", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NBE0_CLE, 60, + "gpmc_nbe0_cle", NULL, NULL, NULL, + "gpio_60", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NBE1, 61, + "gpmc_nbe1", NULL, NULL, NULL, + "gpio_61", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NCS1, 52, + "gpmc_ncs1", NULL, NULL, NULL, + "gpio_52", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NCS2, 53, + "gpmc_ncs2", NULL, NULL, NULL, + "gpio_53", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NCS3, 54, + "gpmc_ncs3", "sys_ndmareq0", NULL, NULL, + "gpio_54", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NCS4, 55, + "gpmc_ncs4", "sys_ndmareq1", "mcbsp4_clkx", "gpt9_pwm_evt", + "gpio_55", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NCS5, 56, + "gpmc_ncs5", "sys_ndmareq2", "mcbsp4_dr", "gpt10_pwm_evt", + "gpio_56", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NCS6, 57, + "gpmc_ncs6", "sys_ndmareq3", "mcbsp4_dx", "gpt11_pwm_evt", + "gpio_57", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NCS7, 58, + "gpmc_ncs7", "gpmc_io_dir", "mcbsp4_fsx", "gpt8_pwm_evt", + "gpio_58", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NWP, 62, + "gpmc_nwp", NULL, NULL, NULL, + "gpio_62", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_WAIT1, 63, + "gpmc_wait1", NULL, NULL, NULL, + "gpio_63", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_WAIT2, 64, + "gpmc_wait2", NULL, NULL, NULL, + "gpio_64", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_WAIT3, 65, + "gpmc_wait3", "sys_ndmareq1", NULL, NULL, + "gpio_65", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HDQ_SIO, 170, + "hdq_sio", "sys_altclk", "i2c2_sccbe", "i2c3_sccbe", + "gpio_170", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_CLK, 120, + "hsusb0_clk", NULL, NULL, NULL, + "gpio_120", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA0, 125, + "hsusb0_data0", NULL, "uart3_tx_irtx", NULL, + "gpio_125", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA1, 130, + "hsusb0_data1", NULL, "uart3_rx_irrx", NULL, + "gpio_130", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA2, 131, + "hsusb0_data2", NULL, "uart3_rts_sd", NULL, + "gpio_131", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA3, 169, + "hsusb0_data3", NULL, "uart3_cts_rctx", NULL, + "gpio_169", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA4, 188, + "hsusb0_data4", NULL, NULL, NULL, + "gpio_188", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA5, 189, + "hsusb0_data5", NULL, NULL, NULL, + "gpio_189", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA6, 190, + "hsusb0_data6", NULL, NULL, NULL, + "gpio_190", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA7, 191, + "hsusb0_data7", NULL, NULL, NULL, + "gpio_191", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DIR, 122, + "hsusb0_dir", NULL, NULL, NULL, + "gpio_122", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_NXT, 124, + "hsusb0_nxt", NULL, NULL, NULL, + "gpio_124", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_STP, 121, + "hsusb0_stp", NULL, NULL, NULL, + "gpio_121", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(I2C2_SCL, 168, + "i2c2_scl", NULL, NULL, NULL, + "gpio_168", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(I2C2_SDA, 183, + "i2c2_sda", NULL, NULL, NULL, + "gpio_183", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(I2C3_SCL, 184, + "i2c3_scl", NULL, NULL, NULL, + "gpio_184", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(I2C3_SDA, 185, + "i2c3_sda", NULL, NULL, NULL, + "gpio_185", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(I2C4_SCL, 0, + "i2c4_scl", "sys_nvmode1", NULL, NULL, + NULL, NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(I2C4_SDA, 0, + "i2c4_sda", "sys_nvmode2", NULL, NULL, + NULL, NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(JTAG_EMU0, 11, + "jtag_emu0", NULL, NULL, NULL, + "gpio_11", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(JTAG_EMU1, 31, + "jtag_emu1", NULL, NULL, NULL, + "gpio_31", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP1_CLKR, 156, + "mcbsp1_clkr", "mcspi4_clk", NULL, NULL, + "gpio_156", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP1_CLKX, 162, + "mcbsp1_clkx", NULL, "mcbsp3_clkx", NULL, + "gpio_162", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP1_DR, 159, + "mcbsp1_dr", "mcspi4_somi", "mcbsp3_dr", NULL, + "gpio_159", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP1_DX, 158, + "mcbsp1_dx", "mcspi4_simo", "mcbsp3_dx", NULL, + "gpio_158", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP1_FSR, 157, + "mcbsp1_fsr", NULL, "cam_global_reset", NULL, + "gpio_157", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP1_FSX, 161, + "mcbsp1_fsx", "mcspi4_cs0", "mcbsp3_fsx", NULL, + "gpio_161", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP2_CLKX, 117, + "mcbsp2_clkx", NULL, NULL, NULL, + "gpio_117", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP2_DR, 118, + "mcbsp2_dr", NULL, NULL, NULL, + "gpio_118", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP2_DX, 119, + "mcbsp2_dx", NULL, NULL, NULL, + "gpio_119", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP2_FSX, 116, + "mcbsp2_fsx", NULL, NULL, NULL, + "gpio_116", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP3_CLKX, 142, + "mcbsp3_clkx", "uart2_tx", NULL, NULL, + "gpio_142", "hsusb3_tll_data6", NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP3_DR, 141, + "mcbsp3_dr", "uart2_rts", NULL, NULL, + "gpio_141", "hsusb3_tll_data5", NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP3_DX, 140, + "mcbsp3_dx", "uart2_cts", NULL, NULL, + "gpio_140", "hsusb3_tll_data4", NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP3_FSX, 143, + "mcbsp3_fsx", "uart2_rx", NULL, NULL, + "gpio_143", "hsusb3_tll_data7", NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP4_CLKX, 152, + "mcbsp4_clkx", NULL, NULL, NULL, + "gpio_152", "hsusb3_tll_data1", "mm3_txse0", "safe_mode"), + _OMAP3_MUXENTRY(MCBSP4_DR, 153, + "mcbsp4_dr", NULL, NULL, NULL, + "gpio_153", "hsusb3_tll_data0", "mm3_rxrcv", "safe_mode"), + _OMAP3_MUXENTRY(MCBSP4_DX, 154, + "mcbsp4_dx", NULL, NULL, NULL, + "gpio_154", "hsusb3_tll_data2", "mm3_txdat", "safe_mode"), + _OMAP3_MUXENTRY(MCBSP4_FSX, 155, + "mcbsp4_fsx", NULL, NULL, NULL, + "gpio_155", "hsusb3_tll_data3", "mm3_txen_n", "safe_mode"), + _OMAP3_MUXENTRY(MCBSP_CLKS, 160, + "mcbsp_clks", NULL, "cam_shutter", NULL, + "gpio_160", "uart1_cts", NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI1_CLK, 171, + "mcspi1_clk", "sdmmc2_dat4", NULL, NULL, + "gpio_171", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI1_CS0, 174, + "mcspi1_cs0", "sdmmc2_dat7", NULL, NULL, + "gpio_174", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI1_CS1, 175, + "mcspi1_cs1", NULL, NULL, "sdmmc3_cmd", + "gpio_175", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI1_CS2, 176, + "mcspi1_cs2", NULL, NULL, "sdmmc3_clk", + "gpio_176", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI1_CS3, 177, + "mcspi1_cs3", NULL, "hsusb2_tll_data2", "hsusb2_data2", + "gpio_177", "mm2_txdat", NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI1_SIMO, 172, + "mcspi1_simo", "sdmmc2_dat5", NULL, NULL, + "gpio_172", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI1_SOMI, 173, + "mcspi1_somi", "sdmmc2_dat6", NULL, NULL, + "gpio_173", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI2_CLK, 178, + "mcspi2_clk", NULL, "hsusb2_tll_data7", "hsusb2_data7", + "gpio_178", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI2_CS0, 181, + "mcspi2_cs0", "gpt11_pwm_evt", + "hsusb2_tll_data6", "hsusb2_data6", + "gpio_181", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI2_CS1, 182, + "mcspi2_cs1", "gpt8_pwm_evt", + "hsusb2_tll_data3", "hsusb2_data3", + "gpio_182", "mm2_txen_n", NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI2_SIMO, 179, + "mcspi2_simo", "gpt9_pwm_evt", + "hsusb2_tll_data4", "hsusb2_data4", + "gpio_179", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI2_SOMI, 180, + "mcspi2_somi", "gpt10_pwm_evt", + "hsusb2_tll_data5", "hsusb2_data5", + "gpio_180", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_CLK, 120, + "sdmmc1_clk", NULL, NULL, NULL, + "gpio_120", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_CMD, 121, + "sdmmc1_cmd", NULL, NULL, NULL, + "gpio_121", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT0, 122, + "sdmmc1_dat0", NULL, NULL, NULL, + "gpio_122", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT1, 123, + "sdmmc1_dat1", NULL, NULL, NULL, + "gpio_123", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT2, 124, + "sdmmc1_dat2", NULL, NULL, NULL, + "gpio_124", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT3, 125, + "sdmmc1_dat3", NULL, NULL, NULL, + "gpio_125", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT4, 126, + "sdmmc1_dat4", NULL, "sim_io", NULL, + "gpio_126", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT5, 127, + "sdmmc1_dat5", NULL, "sim_clk", NULL, + "gpio_127", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT6, 128, + "sdmmc1_dat6", NULL, "sim_pwrctrl", NULL, + "gpio_128", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT7, 129, + "sdmmc1_dat7", NULL, "sim_rst", NULL, + "gpio_129", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_CLK, 130, + "sdmmc2_clk", "mcspi3_clk", NULL, NULL, + "gpio_130", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_CMD, 131, + "sdmmc2_cmd", "mcspi3_simo", NULL, NULL, + "gpio_131", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT0, 132, + "sdmmc2_dat0", "mcspi3_somi", NULL, NULL, + "gpio_132", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT1, 133, + "sdmmc2_dat1", NULL, NULL, NULL, + "gpio_133", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT2, 134, + "sdmmc2_dat2", "mcspi3_cs1", NULL, NULL, + "gpio_134", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT3, 135, + "sdmmc2_dat3", "mcspi3_cs0", NULL, NULL, + "gpio_135", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT4, 136, + "sdmmc2_dat4", "sdmmc2_dir_dat0", NULL, "sdmmc3_dat0", + "gpio_136", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT5, 137, + "sdmmc2_dat5", "sdmmc2_dir_dat1", + "cam_global_reset", "sdmmc3_dat1", + "gpio_137", "hsusb3_tll_stp", "mm3_rxdp", "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT6, 138, + "sdmmc2_dat6", "sdmmc2_dir_cmd", "cam_shutter", "sdmmc3_dat2", + "gpio_138", "hsusb3_tll_dir", NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT7, 139, + "sdmmc2_dat7", "sdmmc2_clkin", NULL, "sdmmc3_dat3", + "gpio_139", "hsusb3_tll_nxt", "mm3_rxdm", "safe_mode"), + _OMAP3_MUXENTRY(SDRC_CKE0, 0, + "sdrc_cke0", NULL, NULL, NULL, + NULL, NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDRC_CKE1, 0, + "sdrc_cke1", NULL, NULL, NULL, + NULL, NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT0, 2, + "sys_boot0", NULL, NULL, NULL, + "gpio_2", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT1, 3, + "sys_boot1", NULL, NULL, NULL, + "gpio_3", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT2, 4, + "sys_boot2", NULL, NULL, NULL, + "gpio_4", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT3, 5, + "sys_boot3", NULL, NULL, NULL, + "gpio_5", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT4, 6, + "sys_boot4", "sdmmc2_dir_dat2", NULL, NULL, + "gpio_6", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT5, 7, + "sys_boot5", "sdmmc2_dir_dat3", NULL, NULL, + "gpio_7", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT6, 8, + "sys_boot6", NULL, NULL, NULL, + "gpio_8", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_CLKOUT1, 10, + "sys_clkout1", NULL, NULL, NULL, + "gpio_10", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_CLKOUT2, 186, + "sys_clkout2", NULL, NULL, NULL, + "gpio_186", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_CLKREQ, 1, + "sys_clkreq", NULL, NULL, NULL, + "gpio_1", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_NIRQ, 0, + "sys_nirq", NULL, NULL, NULL, + "gpio_0", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_NRESWARM, 30, + "sys_nreswarm", NULL, NULL, NULL, + "gpio_30", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_OFF_MODE, 9, + "sys_off_mode", NULL, NULL, NULL, + "gpio_9", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART1_CTS, 150, + "uart1_cts", NULL, NULL, NULL, + "gpio_150", "hsusb3_tll_clk", NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART1_RTS, 149, + "uart1_rts", NULL, NULL, NULL, + "gpio_149", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART1_RX, 151, + "uart1_rx", NULL, "mcbsp1_clkr", "mcspi4_clk", + "gpio_151", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART1_TX, 148, + "uart1_tx", NULL, NULL, NULL, + "gpio_148", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART2_CTS, 144, + "uart2_cts", "mcbsp3_dx", "gpt9_pwm_evt", NULL, + "gpio_144", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART2_RTS, 145, + "uart2_rts", "mcbsp3_dr", "gpt10_pwm_evt", NULL, + "gpio_145", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART2_RX, 147, + "uart2_rx", "mcbsp3_fsx", "gpt8_pwm_evt", NULL, + "gpio_147", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART2_TX, 146, + "uart2_tx", "mcbsp3_clkx", "gpt11_pwm_evt", NULL, + "gpio_146", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART3_CTS_RCTX, 163, + "uart3_cts_rctx", NULL, NULL, NULL, + "gpio_163", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART3_RTS_SD, 164, + "uart3_rts_sd", NULL, NULL, NULL, + "gpio_164", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART3_RX_IRRX, 165, + "uart3_rx_irrx", NULL, NULL, NULL, + "gpio_165", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART3_TX_IRTX, 166, + "uart3_tx_irtx", NULL, NULL, NULL, + "gpio_166", NULL, NULL, "safe_mode"), + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; + +/* + * Signals different on CBC package compared to the superset + */ +#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBC) +struct omap_mux __initdata omap3_cbc_subset[] = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define omap3_cbc_subset NULL +#endif + +/* + * Balls for CBC package + * 515-pin s-PBGA Package, 0.65mm Ball Pitch (Top), 0.50mm Ball Pitch (Bottom) + * + * FIXME: What's up with the outdated TI documentation? See: + * + * http://wiki.davincidsp.com/index.php/Datasheet_Errata_for_OMAP35x_CBC_Package + * http://community.ti.com/forums/t/10982.aspx + */ +#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \ + && defined(CONFIG_OMAP_PACKAGE_CBC) +struct omap_ball __initdata omap3_cbc_ball[] = { + _OMAP3_BALLENTRY(CAM_D0, "ae16", NULL), + _OMAP3_BALLENTRY(CAM_D1, "ae15", NULL), + _OMAP3_BALLENTRY(CAM_D10, "d25", NULL), + _OMAP3_BALLENTRY(CAM_D11, "e26", NULL), + _OMAP3_BALLENTRY(CAM_D2, "a24", NULL), + _OMAP3_BALLENTRY(CAM_D3, "b24", NULL), + _OMAP3_BALLENTRY(CAM_D4, "d24", NULL), + _OMAP3_BALLENTRY(CAM_D5, "c24", NULL), + _OMAP3_BALLENTRY(CAM_D6, "p25", NULL), + _OMAP3_BALLENTRY(CAM_D7, "p26", NULL), + _OMAP3_BALLENTRY(CAM_D8, "n25", NULL), + _OMAP3_BALLENTRY(CAM_D9, "n26", NULL), + _OMAP3_BALLENTRY(CAM_FLD, "b23", NULL), + _OMAP3_BALLENTRY(CAM_HS, "c23", NULL), + _OMAP3_BALLENTRY(CAM_PCLK, "c26", NULL), + _OMAP3_BALLENTRY(CAM_STROBE, "d26", NULL), + _OMAP3_BALLENTRY(CAM_VS, "d23", NULL), + _OMAP3_BALLENTRY(CAM_WEN, "a23", NULL), + _OMAP3_BALLENTRY(CAM_XCLKA, "c25", NULL), + _OMAP3_BALLENTRY(CAM_XCLKB, "e25", NULL), + _OMAP3_BALLENTRY(CSI2_DX0, "ad17", NULL), + _OMAP3_BALLENTRY(CSI2_DX1, "ae18", NULL), + _OMAP3_BALLENTRY(CSI2_DY0, "ad16", NULL), + _OMAP3_BALLENTRY(CSI2_DY1, "ae17", NULL), + _OMAP3_BALLENTRY(DSS_ACBIAS, "f26", NULL), + _OMAP3_BALLENTRY(DSS_DATA0, "ae21", NULL), + _OMAP3_BALLENTRY(DSS_DATA1, "ae22", NULL), + _OMAP3_BALLENTRY(DSS_DATA10, "ac26", NULL), + _OMAP3_BALLENTRY(DSS_DATA11, "ad26", NULL), + _OMAP3_BALLENTRY(DSS_DATA12, "aa25", NULL), + _OMAP3_BALLENTRY(DSS_DATA13, "y25", NULL), + _OMAP3_BALLENTRY(DSS_DATA14, "aa26", NULL), + _OMAP3_BALLENTRY(DSS_DATA15, "ab26", NULL), + _OMAP3_BALLENTRY(DSS_DATA16, "l25", NULL), + _OMAP3_BALLENTRY(DSS_DATA17, "l26", NULL), + _OMAP3_BALLENTRY(DSS_DATA18, "m24", NULL), + _OMAP3_BALLENTRY(DSS_DATA19, "m26", NULL), + _OMAP3_BALLENTRY(DSS_DATA2, "ae23", NULL), + _OMAP3_BALLENTRY(DSS_DATA20, "f25", NULL), + _OMAP3_BALLENTRY(DSS_DATA21, "n24", NULL), + _OMAP3_BALLENTRY(DSS_DATA22, "ac25", NULL), + _OMAP3_BALLENTRY(DSS_DATA23, "ab25", NULL), + _OMAP3_BALLENTRY(DSS_DATA3, "ae24", NULL), + _OMAP3_BALLENTRY(DSS_DATA4, "ad23", NULL), + _OMAP3_BALLENTRY(DSS_DATA5, "ad24", NULL), + _OMAP3_BALLENTRY(DSS_DATA6, "g26", NULL), + _OMAP3_BALLENTRY(DSS_DATA7, "h25", NULL), + _OMAP3_BALLENTRY(DSS_DATA8, "h26", NULL), + _OMAP3_BALLENTRY(DSS_DATA9, "j26", NULL), + _OMAP3_BALLENTRY(DSS_HSYNC, "k24", NULL), + _OMAP3_BALLENTRY(DSS_PCLK, "g25", NULL), + _OMAP3_BALLENTRY(DSS_VSYNC, "m25", NULL), + _OMAP3_BALLENTRY(ETK_CLK, "ab2", NULL), + _OMAP3_BALLENTRY(ETK_CTL, "ab3", NULL), + _OMAP3_BALLENTRY(ETK_D0, "ac3", NULL), + _OMAP3_BALLENTRY(ETK_D1, "ad4", NULL), + _OMAP3_BALLENTRY(ETK_D10, "ae4", NULL), + _OMAP3_BALLENTRY(ETK_D11, "af6", NULL), + _OMAP3_BALLENTRY(ETK_D12, "ae6", NULL), + _OMAP3_BALLENTRY(ETK_D13, "af7", NULL), + _OMAP3_BALLENTRY(ETK_D14, "af9", NULL), + _OMAP3_BALLENTRY(ETK_D15, "ae9", NULL), + _OMAP3_BALLENTRY(ETK_D2, "ad3", NULL), + _OMAP3_BALLENTRY(ETK_D3, "aa3", NULL), + _OMAP3_BALLENTRY(ETK_D4, "y3", NULL), + _OMAP3_BALLENTRY(ETK_D5, "ab1", NULL), + _OMAP3_BALLENTRY(ETK_D6, "ae3", NULL), + _OMAP3_BALLENTRY(ETK_D7, "ad2", NULL), + _OMAP3_BALLENTRY(ETK_D8, "aa4", NULL), + _OMAP3_BALLENTRY(ETK_D9, "v2", NULL), + _OMAP3_BALLENTRY(GPMC_A1, "j2", NULL), + _OMAP3_BALLENTRY(GPMC_A10, "d2", NULL), + _OMAP3_BALLENTRY(GPMC_A2, "h1", NULL), + _OMAP3_BALLENTRY(GPMC_A3, "h2", NULL), + _OMAP3_BALLENTRY(GPMC_A4, "g2", NULL), + _OMAP3_BALLENTRY(GPMC_A5, "f1", NULL), + _OMAP3_BALLENTRY(GPMC_A6, "f2", NULL), + _OMAP3_BALLENTRY(GPMC_A7, "e1", NULL), + _OMAP3_BALLENTRY(GPMC_A8, "e2", NULL), + _OMAP3_BALLENTRY(GPMC_A9, "d1", NULL), + _OMAP3_BALLENTRY(GPMC_CLK, "n1", "l1"), + _OMAP3_BALLENTRY(GPMC_D10, "t1", "n1"), + _OMAP3_BALLENTRY(GPMC_D11, "u2", "p2"), + _OMAP3_BALLENTRY(GPMC_D12, "u1", "p1"), + _OMAP3_BALLENTRY(GPMC_D13, "p1", "m1"), + _OMAP3_BALLENTRY(GPMC_D14, "l2", "j2"), + _OMAP3_BALLENTRY(GPMC_D15, "m2", "k2"), + _OMAP3_BALLENTRY(GPMC_D8, "v1", "r1"), + _OMAP3_BALLENTRY(GPMC_D9, "y1", "t1"), + _OMAP3_BALLENTRY(GPMC_NBE0_CLE, "k2", NULL), + _OMAP3_BALLENTRY(GPMC_NBE1, "j1", NULL), + _OMAP3_BALLENTRY(GPMC_NCS1, "ad1", "w1"), + _OMAP3_BALLENTRY(GPMC_NCS2, "a3", NULL), + _OMAP3_BALLENTRY(GPMC_NCS3, "b6", NULL), + _OMAP3_BALLENTRY(GPMC_NCS4, "b4", NULL), + _OMAP3_BALLENTRY(GPMC_NCS5, "c4", NULL), + _OMAP3_BALLENTRY(GPMC_NCS6, "b5", NULL), + _OMAP3_BALLENTRY(GPMC_NCS7, "c5", NULL), + _OMAP3_BALLENTRY(GPMC_NWP, "ac6", "y5"), + _OMAP3_BALLENTRY(GPMC_WAIT1, "ac8", "y8"), + _OMAP3_BALLENTRY(GPMC_WAIT2, "b3", NULL), + _OMAP3_BALLENTRY(GPMC_WAIT3, "c6", NULL), + _OMAP3_BALLENTRY(HDQ_SIO, "j23", NULL), + _OMAP3_BALLENTRY(HSUSB0_CLK, "w19", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA0, "v20", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA1, "y20", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA2, "v18", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA3, "w20", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA4, "w17", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA5, "y18", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA6, "y19", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA7, "y17", NULL), + _OMAP3_BALLENTRY(HSUSB0_DIR, "v19", NULL), + _OMAP3_BALLENTRY(HSUSB0_NXT, "w18", NULL), + _OMAP3_BALLENTRY(HSUSB0_STP, "u20", NULL), + _OMAP3_BALLENTRY(I2C2_SCL, "c2", NULL), + _OMAP3_BALLENTRY(I2C2_SDA, "c1", NULL), + _OMAP3_BALLENTRY(I2C3_SCL, "ab4", NULL), + _OMAP3_BALLENTRY(I2C3_SDA, "ac4", NULL), + _OMAP3_BALLENTRY(I2C4_SCL, "ad15", NULL), + _OMAP3_BALLENTRY(I2C4_SDA, "w16", NULL), + _OMAP3_BALLENTRY(JTAG_EMU0, "y15", NULL), + _OMAP3_BALLENTRY(JTAG_EMU1, "y14", NULL), + _OMAP3_BALLENTRY(MCBSP1_CLKR, "u19", NULL), + _OMAP3_BALLENTRY(MCBSP1_CLKX, "t17", NULL), + _OMAP3_BALLENTRY(MCBSP1_DR, "t20", NULL), + _OMAP3_BALLENTRY(MCBSP1_DX, "u17", NULL), + _OMAP3_BALLENTRY(MCBSP1_FSR, "v17", NULL), + _OMAP3_BALLENTRY(MCBSP1_FSX, "p20", NULL), + _OMAP3_BALLENTRY(MCBSP2_CLKX, "r18", NULL), + _OMAP3_BALLENTRY(MCBSP2_DR, "t18", NULL), + _OMAP3_BALLENTRY(MCBSP2_DX, "r19", NULL), + _OMAP3_BALLENTRY(MCBSP2_FSX, "u18", NULL), + _OMAP3_BALLENTRY(MCBSP3_CLKX, "u3", NULL), + _OMAP3_BALLENTRY(MCBSP3_DR, "n3", NULL), + _OMAP3_BALLENTRY(MCBSP3_DX, "p3", NULL), + _OMAP3_BALLENTRY(MCBSP3_FSX, "w3", NULL), + _OMAP3_BALLENTRY(MCBSP4_CLKX, "v3", NULL), + _OMAP3_BALLENTRY(MCBSP4_DR, "u4", NULL), + _OMAP3_BALLENTRY(MCBSP4_DX, "r3", NULL), + _OMAP3_BALLENTRY(MCBSP4_FSX, "t3", NULL), + _OMAP3_BALLENTRY(MCBSP_CLKS, "t19", NULL), + _OMAP3_BALLENTRY(MCSPI1_CLK, "p9", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS0, "r7", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS1, "r8", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS2, "r9", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS3, "t8", NULL), + _OMAP3_BALLENTRY(MCSPI1_SIMO, "p8", NULL), + _OMAP3_BALLENTRY(MCSPI1_SOMI, "p7", NULL), + _OMAP3_BALLENTRY(MCSPI2_CLK, "w7", NULL), + _OMAP3_BALLENTRY(MCSPI2_CS0, "v8", NULL), + _OMAP3_BALLENTRY(MCSPI2_CS1, "v9", NULL), + _OMAP3_BALLENTRY(MCSPI2_SIMO, "w8", NULL), + _OMAP3_BALLENTRY(MCSPI2_SOMI, "u8", NULL), + _OMAP3_BALLENTRY(SDMMC1_CLK, "n19", NULL), + _OMAP3_BALLENTRY(SDMMC1_CMD, "l18", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT0, "m19", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT1, "m18", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT2, "k18", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT3, "n20", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT4, "m20", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT5, "p17", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT6, "p18", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT7, "p19", NULL), + _OMAP3_BALLENTRY(SDMMC2_CLK, "w10", NULL), + _OMAP3_BALLENTRY(SDMMC2_CMD, "r10", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT0, "t10", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT1, "t9", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT2, "u10", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT3, "u9", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT4, "v10", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT5, "m3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT6, "l3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT7, "k3", NULL), + _OMAP3_BALLENTRY(SYS_BOOT0, "f3", NULL), + _OMAP3_BALLENTRY(SYS_BOOT1, "d3", NULL), + _OMAP3_BALLENTRY(SYS_BOOT2, "c3", NULL), + _OMAP3_BALLENTRY(SYS_BOOT3, "e3", NULL), + _OMAP3_BALLENTRY(SYS_BOOT4, "e4", NULL), + _OMAP3_BALLENTRY(SYS_BOOT5, "g3", NULL), + _OMAP3_BALLENTRY(SYS_BOOT6, "d4", NULL), + _OMAP3_BALLENTRY(SYS_CLKOUT1, "ae14", NULL), + _OMAP3_BALLENTRY(SYS_CLKOUT2, "w11", NULL), + _OMAP3_BALLENTRY(SYS_CLKREQ, "w15", NULL), + _OMAP3_BALLENTRY(SYS_NIRQ, "v16", NULL), + _OMAP3_BALLENTRY(SYS_NRESWARM, "ad7", "aa5"), + _OMAP3_BALLENTRY(SYS_OFF_MODE, "v12", NULL), + _OMAP3_BALLENTRY(UART1_CTS, "w2", NULL), + _OMAP3_BALLENTRY(UART1_RTS, "r2", NULL), + _OMAP3_BALLENTRY(UART1_RX, "h3", NULL), + _OMAP3_BALLENTRY(UART1_TX, "l4", NULL), + _OMAP3_BALLENTRY(UART2_CTS, "y24", NULL), + _OMAP3_BALLENTRY(UART2_RTS, "aa24", NULL), + _OMAP3_BALLENTRY(UART2_RX, "ad21", NULL), + _OMAP3_BALLENTRY(UART2_TX, "ad22", NULL), + _OMAP3_BALLENTRY(UART3_CTS_RCTX, "f23", NULL), + _OMAP3_BALLENTRY(UART3_RTS_SD, "f24", NULL), + _OMAP3_BALLENTRY(UART3_RX_IRRX, "h24", NULL), + _OMAP3_BALLENTRY(UART3_TX_IRTX, "g24", NULL), + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define omap3_cbc_ball NULL +#endif + +/* + * Signals different on CUS package compared to superset + */ +#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CUS) +struct omap_mux __initdata omap3_cus_subset[] = { + _OMAP3_MUXENTRY(CAM_D10, 109, + "cam_d10", NULL, NULL, NULL, + "gpio_109", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D11, 110, + "cam_d11", NULL, NULL, NULL, + "gpio_110", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D2, 101, + "cam_d2", NULL, NULL, NULL, + "gpio_101", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D3, 102, + "cam_d3", NULL, NULL, NULL, + "gpio_102", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D4, 103, + "cam_d4", NULL, NULL, NULL, + "gpio_103", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D5, 104, + "cam_d5", NULL, NULL, NULL, + "gpio_104", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_FLD, 98, + "cam_fld", NULL, "cam_global_reset", NULL, + "gpio_98", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_HS, 94, + "cam_hs", NULL, NULL, NULL, + "gpio_94", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_PCLK, 97, + "cam_pclk", NULL, NULL, NULL, + "gpio_97", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_STROBE, 126, + "cam_strobe", NULL, NULL, NULL, + "gpio_126", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_VS, 95, + "cam_vs", NULL, NULL, NULL, + "gpio_95", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_WEN, 167, + "cam_wen", NULL, "cam_shutter", NULL, + "gpio_167", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA6, 76, + "dss_data6", NULL, "uart1_tx", NULL, + "gpio_76", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA7, 77, + "dss_data7", NULL, "uart1_rx", NULL, + "gpio_77", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA8, 78, + "dss_data8", NULL, NULL, NULL, + "gpio_78", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA9, 79, + "dss_data9", NULL, NULL, NULL, + "gpio_79", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_HSYNC, 67, + "dss_hsync", NULL, NULL, NULL, + "gpio_67", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_PCLK, 66, + "dss_pclk", NULL, NULL, NULL, + "gpio_66", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(ETK_CLK, 12, + "etk_clk", "mcbsp5_clkx", "sdmmc3_clk", "hsusb1_stp", + "gpio_12", "mm1_rxdp", "hsusb1_tll_stp", NULL), + _OMAP3_MUXENTRY(ETK_CTL, 13, + "etk_ctl", NULL, "sdmmc3_cmd", "hsusb1_clk", + "gpio_13", NULL, "hsusb1_tll_clk", NULL), + _OMAP3_MUXENTRY(ETK_D0, 14, + "etk_d0", "mcspi3_simo", "sdmmc3_dat4", "hsusb1_data0", + "gpio_14", "mm1_rxrcv", "hsusb1_tll_data0", NULL), + _OMAP3_MUXENTRY(ETK_D1, 15, + "etk_d1", "mcspi3_somi", NULL, "hsusb1_data1", + "gpio_15", "mm1_txse0", "hsusb1_tll_data1", NULL), + _OMAP3_MUXENTRY(ETK_D10, 24, + "etk_d10", NULL, "uart1_rx", "hsusb2_clk", + "gpio_24", NULL, "hsusb2_tll_clk", NULL), + _OMAP3_MUXENTRY(ETK_D11, 25, + "etk_d11", NULL, NULL, "hsusb2_stp", + "gpio_25", "mm2_rxdp", "hsusb2_tll_stp", NULL), + _OMAP3_MUXENTRY(ETK_D12, 26, + "etk_d12", NULL, NULL, "hsusb2_dir", + "gpio_26", NULL, "hsusb2_tll_dir", NULL), + _OMAP3_MUXENTRY(ETK_D13, 27, + "etk_d13", NULL, NULL, "hsusb2_nxt", + "gpio_27", "mm2_rxdm", "hsusb2_tll_nxt", NULL), + _OMAP3_MUXENTRY(ETK_D14, 28, + "etk_d14", NULL, NULL, "hsusb2_data0", + "gpio_28", "mm2_rxrcv", "hsusb2_tll_data0", NULL), + _OMAP3_MUXENTRY(ETK_D15, 29, + "etk_d15", NULL, NULL, "hsusb2_data1", + "gpio_29", "mm2_txse0", "hsusb2_tll_data1", NULL), + _OMAP3_MUXENTRY(ETK_D2, 16, + "etk_d2", "mcspi3_cs0", NULL, "hsusb1_data2", + "gpio_16", "mm1_txdat", "hsusb1_tll_data2", NULL), + _OMAP3_MUXENTRY(ETK_D3, 17, + "etk_d3", "mcspi3_clk", "sdmmc3_dat3", "hsusb1_data7", + "gpio_17", NULL, "hsusb1_tll_data7", NULL), + _OMAP3_MUXENTRY(ETK_D4, 18, + "etk_d4", "mcbsp5_dr", "sdmmc3_dat0", "hsusb1_data4", + "gpio_18", NULL, "hsusb1_tll_data4", NULL), + _OMAP3_MUXENTRY(ETK_D5, 19, + "etk_d5", "mcbsp5_fsx", "sdmmc3_dat1", "hsusb1_data5", + "gpio_19", NULL, "hsusb1_tll_data5", NULL), + _OMAP3_MUXENTRY(ETK_D6, 20, + "etk_d6", "mcbsp5_dx", "sdmmc3_dat2", "hsusb1_data6", + "gpio_20", NULL, "hsusb1_tll_data6", NULL), + _OMAP3_MUXENTRY(ETK_D7, 21, + "etk_d7", "mcspi3_cs1", "sdmmc3_dat7", "hsusb1_data3", + "gpio_21", "mm1_txen_n", "hsusb1_tll_data3", NULL), + _OMAP3_MUXENTRY(ETK_D8, 22, + "etk_d8", "sys_drm_msecure", "sdmmc3_dat6", "hsusb1_dir", + "gpio_22", NULL, "hsusb1_tll_dir", NULL), + _OMAP3_MUXENTRY(ETK_D9, 23, + "etk_d9", "sys_secure_indicator", "sdmmc3_dat5", "hsusb1_nxt", + "gpio_23", "mm1_rxdm", "hsusb1_tll_nxt", NULL), + _OMAP3_MUXENTRY(MCBSP3_CLKX, 142, + "mcbsp3_clkx", "uart2_tx", NULL, NULL, + "gpio_142", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP3_DR, 141, + "mcbsp3_dr", "uart2_rts", NULL, NULL, + "gpio_141", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP3_DX, 140, + "mcbsp3_dx", "uart2_cts", NULL, NULL, + "gpio_140", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP3_FSX, 143, + "mcbsp3_fsx", "uart2_rx", NULL, NULL, + "gpio_143", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT5, 137, + "sdmmc2_dat5", "sdmmc2_dir_dat1", + "cam_global_reset", "sdmmc3_dat1", + "gpio_137", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT6, 138, + "sdmmc2_dat6", "sdmmc2_dir_cmd", "cam_shutter", "sdmmc3_dat2", + "gpio_138", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT7, 139, + "sdmmc2_dat7", "sdmmc2_clkin", NULL, "sdmmc3_dat3", + "gpio_139", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART1_CTS, 150, + "uart1_cts", NULL, NULL, NULL, + "gpio_150", NULL, NULL, "safe_mode"), + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define omap3_cus_subset NULL +#endif + +/* + * Balls for CUS package + * 423-pin s-PBGA Package, 0.65mm Ball Pitch (Bottom) + */ +#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \ + && defined(CONFIG_OMAP_PACKAGE_CUS) +struct omap_ball __initdata omap3_cus_ball[] = { + _OMAP3_BALLENTRY(CAM_D0, "ab18", NULL), + _OMAP3_BALLENTRY(CAM_D1, "ac18", NULL), + _OMAP3_BALLENTRY(CAM_D10, "f21", NULL), + _OMAP3_BALLENTRY(CAM_D11, "g21", NULL), + _OMAP3_BALLENTRY(CAM_D2, "g19", NULL), + _OMAP3_BALLENTRY(CAM_D3, "f19", NULL), + _OMAP3_BALLENTRY(CAM_D4, "g20", NULL), + _OMAP3_BALLENTRY(CAM_D5, "b21", NULL), + _OMAP3_BALLENTRY(CAM_D6, "l24", NULL), + _OMAP3_BALLENTRY(CAM_D7, "k24", NULL), + _OMAP3_BALLENTRY(CAM_D8, "j23", NULL), + _OMAP3_BALLENTRY(CAM_D9, "k23", NULL), + _OMAP3_BALLENTRY(CAM_FLD, "h24", NULL), + _OMAP3_BALLENTRY(CAM_HS, "a22", NULL), + _OMAP3_BALLENTRY(CAM_PCLK, "j19", NULL), + _OMAP3_BALLENTRY(CAM_STROBE, "j20", NULL), + _OMAP3_BALLENTRY(CAM_VS, "e18", NULL), + _OMAP3_BALLENTRY(CAM_WEN, "f18", NULL), + _OMAP3_BALLENTRY(CAM_XCLKA, "b22", NULL), + _OMAP3_BALLENTRY(CAM_XCLKB, "c22", NULL), + _OMAP3_BALLENTRY(DSS_ACBIAS, "j21", NULL), + _OMAP3_BALLENTRY(DSS_DATA0, "ac19", NULL), + _OMAP3_BALLENTRY(DSS_DATA1, "ab19", NULL), + _OMAP3_BALLENTRY(DSS_DATA10, "ac22", NULL), + _OMAP3_BALLENTRY(DSS_DATA11, "ac23", NULL), + _OMAP3_BALLENTRY(DSS_DATA12, "ab22", NULL), + _OMAP3_BALLENTRY(DSS_DATA13, "y22", NULL), + _OMAP3_BALLENTRY(DSS_DATA14, "w22", NULL), + _OMAP3_BALLENTRY(DSS_DATA15, "v22", NULL), + _OMAP3_BALLENTRY(DSS_DATA16, "j22", NULL), + _OMAP3_BALLENTRY(DSS_DATA17, "g23", NULL), + _OMAP3_BALLENTRY(DSS_DATA18, "g24", NULL), + _OMAP3_BALLENTRY(DSS_DATA19, "h23", NULL), + _OMAP3_BALLENTRY(DSS_DATA2, "ad20", NULL), + _OMAP3_BALLENTRY(DSS_DATA20, "d23", NULL), + _OMAP3_BALLENTRY(DSS_DATA21, "k22", NULL), + _OMAP3_BALLENTRY(DSS_DATA22, "v21", NULL), + _OMAP3_BALLENTRY(DSS_DATA23, "w21", NULL), + _OMAP3_BALLENTRY(DSS_DATA3, "ac20", NULL), + _OMAP3_BALLENTRY(DSS_DATA4, "ad21", NULL), + _OMAP3_BALLENTRY(DSS_DATA5, "ac21", NULL), + _OMAP3_BALLENTRY(DSS_DATA6, "d24", NULL), + _OMAP3_BALLENTRY(DSS_DATA7, "e23", NULL), + _OMAP3_BALLENTRY(DSS_DATA8, "e24", NULL), + _OMAP3_BALLENTRY(DSS_DATA9, "f23", NULL), + _OMAP3_BALLENTRY(DSS_HSYNC, "e22", NULL), + _OMAP3_BALLENTRY(DSS_PCLK, "g22", NULL), + _OMAP3_BALLENTRY(DSS_VSYNC, "f22", NULL), + _OMAP3_BALLENTRY(ETK_CLK, "ac1", NULL), + _OMAP3_BALLENTRY(ETK_CTL, "ad3", NULL), + _OMAP3_BALLENTRY(ETK_D0, "ad6", NULL), + _OMAP3_BALLENTRY(ETK_D1, "ac6", NULL), + _OMAP3_BALLENTRY(ETK_D10, "ac3", NULL), + _OMAP3_BALLENTRY(ETK_D11, "ac9", NULL), + _OMAP3_BALLENTRY(ETK_D12, "ac10", NULL), + _OMAP3_BALLENTRY(ETK_D13, "ad11", NULL), + _OMAP3_BALLENTRY(ETK_D14, "ac11", NULL), + _OMAP3_BALLENTRY(ETK_D15, "ad12", NULL), + _OMAP3_BALLENTRY(ETK_D2, "ac7", NULL), + _OMAP3_BALLENTRY(ETK_D3, "ad8", NULL), + _OMAP3_BALLENTRY(ETK_D4, "ac5", NULL), + _OMAP3_BALLENTRY(ETK_D5, "ad2", NULL), + _OMAP3_BALLENTRY(ETK_D6, "ac8", NULL), + _OMAP3_BALLENTRY(ETK_D7, "ad9", NULL), + _OMAP3_BALLENTRY(ETK_D8, "ac4", NULL), + _OMAP3_BALLENTRY(ETK_D9, "ad5", NULL), + _OMAP3_BALLENTRY(GPMC_A1, "k4", NULL), + _OMAP3_BALLENTRY(GPMC_A10, "g2", NULL), + _OMAP3_BALLENTRY(GPMC_A2, "k3", NULL), + _OMAP3_BALLENTRY(GPMC_A3, "k2", NULL), + _OMAP3_BALLENTRY(GPMC_A4, "j4", NULL), + _OMAP3_BALLENTRY(GPMC_A5, "j3", NULL), + _OMAP3_BALLENTRY(GPMC_A6, "j2", NULL), + _OMAP3_BALLENTRY(GPMC_A7, "j1", NULL), + _OMAP3_BALLENTRY(GPMC_A8, "h1", NULL), + _OMAP3_BALLENTRY(GPMC_A9, "h2", NULL), + _OMAP3_BALLENTRY(GPMC_CLK, "w2", NULL), + _OMAP3_BALLENTRY(GPMC_D10, "u1", NULL), + _OMAP3_BALLENTRY(GPMC_D11, "r3", NULL), + _OMAP3_BALLENTRY(GPMC_D12, "t3", NULL), + _OMAP3_BALLENTRY(GPMC_D13, "u2", NULL), + _OMAP3_BALLENTRY(GPMC_D14, "v1", NULL), + _OMAP3_BALLENTRY(GPMC_D15, "v2", NULL), + _OMAP3_BALLENTRY(GPMC_D8, "r2", NULL), + _OMAP3_BALLENTRY(GPMC_D9, "t2", NULL), + _OMAP3_BALLENTRY(GPMC_NBE0_CLE, "k5", NULL), + _OMAP3_BALLENTRY(GPMC_NBE1, "l1", NULL), + _OMAP3_BALLENTRY(GPMC_NCS3, "d2", NULL), + _OMAP3_BALLENTRY(GPMC_NCS4, "f4", NULL), + _OMAP3_BALLENTRY(GPMC_NCS5, "g5", NULL), + _OMAP3_BALLENTRY(GPMC_NCS6, "f3", NULL), + _OMAP3_BALLENTRY(GPMC_NCS7, "g4", NULL), + _OMAP3_BALLENTRY(GPMC_NWP, "e1", NULL), + _OMAP3_BALLENTRY(GPMC_WAIT3, "c2", NULL), + _OMAP3_BALLENTRY(HDQ_SIO, "a24", NULL), + _OMAP3_BALLENTRY(HSUSB0_CLK, "r21", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA0, "t24", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA1, "t23", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA2, "u24", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA3, "u23", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA4, "w24", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA5, "v23", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA6, "w23", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA7, "t22", NULL), + _OMAP3_BALLENTRY(HSUSB0_DIR, "p23", NULL), + _OMAP3_BALLENTRY(HSUSB0_NXT, "r22", NULL), + _OMAP3_BALLENTRY(HSUSB0_STP, "r23", NULL), + _OMAP3_BALLENTRY(I2C2_SCL, "ac15", NULL), + _OMAP3_BALLENTRY(I2C2_SDA, "ac14", NULL), + _OMAP3_BALLENTRY(I2C3_SCL, "ac13", NULL), + _OMAP3_BALLENTRY(I2C3_SDA, "ac12", NULL), + _OMAP3_BALLENTRY(I2C4_SCL, "y16", NULL), + _OMAP3_BALLENTRY(I2C4_SDA, "y15", NULL), + _OMAP3_BALLENTRY(JTAG_EMU0, "ac24", NULL), + _OMAP3_BALLENTRY(JTAG_EMU1, "ad24", NULL), + _OMAP3_BALLENTRY(MCBSP1_CLKR, "w19", NULL), + _OMAP3_BALLENTRY(MCBSP1_CLKX, "v18", NULL), + _OMAP3_BALLENTRY(MCBSP1_DR, "y18", NULL), + _OMAP3_BALLENTRY(MCBSP1_DX, "w18", NULL), + _OMAP3_BALLENTRY(MCBSP1_FSR, "ab20", NULL), + _OMAP3_BALLENTRY(MCBSP1_FSX, "aa19", NULL), + _OMAP3_BALLENTRY(MCBSP2_CLKX, "t21", NULL), + _OMAP3_BALLENTRY(MCBSP2_DR, "v19", NULL), + _OMAP3_BALLENTRY(MCBSP2_DX, "r20", NULL), + _OMAP3_BALLENTRY(MCBSP2_FSX, "v20", NULL), + _OMAP3_BALLENTRY(MCBSP3_CLKX, "w4", NULL), + _OMAP3_BALLENTRY(MCBSP3_DR, "v5", NULL), + _OMAP3_BALLENTRY(MCBSP3_DX, "v6", NULL), + _OMAP3_BALLENTRY(MCBSP3_FSX, "v4", NULL), + _OMAP3_BALLENTRY(MCBSP_CLKS, "aa18", NULL), + _OMAP3_BALLENTRY(MCSPI1_CLK, "t5", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS0, "t6", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS3, "r5", NULL), + _OMAP3_BALLENTRY(MCSPI1_SIMO, "r4", NULL), + _OMAP3_BALLENTRY(MCSPI1_SOMI, "t4", NULL), + _OMAP3_BALLENTRY(MCSPI2_CLK, "n5", NULL), + _OMAP3_BALLENTRY(MCSPI2_CS0, "m5", NULL), + _OMAP3_BALLENTRY(MCSPI2_CS1, "m4", NULL), + _OMAP3_BALLENTRY(MCSPI2_SIMO, "n4", NULL), + _OMAP3_BALLENTRY(MCSPI2_SOMI, "n3", NULL), + _OMAP3_BALLENTRY(SDMMC1_CLK, "m23", NULL), + _OMAP3_BALLENTRY(SDMMC1_CMD, "l23", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT0, "m22", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT1, "m21", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT2, "m20", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT3, "n23", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT4, "n22", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT5, "n21", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT6, "n20", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT7, "p24", NULL), + _OMAP3_BALLENTRY(SDMMC2_CLK, "y1", NULL), + _OMAP3_BALLENTRY(SDMMC2_CMD, "ab5", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT0, "ab3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT1, "y3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT2, "w3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT3, "v3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT4, "ab2", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT5, "aa2", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT6, "y2", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT7, "aa1", NULL), + _OMAP3_BALLENTRY(SYS_BOOT0, "ab12", NULL), + _OMAP3_BALLENTRY(SYS_BOOT1, "ac16", NULL), + _OMAP3_BALLENTRY(SYS_BOOT2, "ad17", NULL), + _OMAP3_BALLENTRY(SYS_BOOT3, "ad18", NULL), + _OMAP3_BALLENTRY(SYS_BOOT4, "ac17", NULL), + _OMAP3_BALLENTRY(SYS_BOOT5, "ab16", NULL), + _OMAP3_BALLENTRY(SYS_BOOT6, "aa15", NULL), + _OMAP3_BALLENTRY(SYS_CLKOUT1, "y7", NULL), + _OMAP3_BALLENTRY(SYS_CLKOUT2, "aa6", NULL), + _OMAP3_BALLENTRY(SYS_CLKREQ, "y13", NULL), + _OMAP3_BALLENTRY(SYS_NIRQ, "w16", NULL), + _OMAP3_BALLENTRY(SYS_NRESWARM, "y10", NULL), + _OMAP3_BALLENTRY(SYS_OFF_MODE, "ad23", NULL), + _OMAP3_BALLENTRY(UART1_CTS, "ac2", NULL), + _OMAP3_BALLENTRY(UART1_RTS, "w6", NULL), + _OMAP3_BALLENTRY(UART1_RX, "v7", NULL), + _OMAP3_BALLENTRY(UART1_TX, "w7", NULL), + _OMAP3_BALLENTRY(UART3_CTS_RCTX, "a23", NULL), + _OMAP3_BALLENTRY(UART3_RTS_SD, "b23", NULL), + _OMAP3_BALLENTRY(UART3_RX_IRRX, "b24", NULL), + _OMAP3_BALLENTRY(UART3_TX_IRTX, "c23", NULL), + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define omap3_cus_ball NULL +#endif + +/* + * Signals different on CBB package comapared to superset + */ +#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBB) +struct omap_mux __initdata omap3_cbb_subset[] = { + _OMAP3_MUXENTRY(CAM_D10, 109, + "cam_d10", NULL, NULL, NULL, + "gpio_109", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D11, 110, + "cam_d11", NULL, NULL, NULL, + "gpio_110", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D2, 101, + "cam_d2", NULL, NULL, NULL, + "gpio_101", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D3, 102, + "cam_d3", NULL, NULL, NULL, + "gpio_102", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D4, 103, + "cam_d4", NULL, NULL, NULL, + "gpio_103", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D5, 104, + "cam_d5", NULL, NULL, NULL, + "gpio_104", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_FLD, 98, + "cam_fld", NULL, "cam_global_reset", NULL, + "gpio_98", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_HS, 94, + "cam_hs", NULL, NULL, NULL, + "gpio_94", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_PCLK, 97, + "cam_pclk", NULL, NULL, NULL, + "gpio_97", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_STROBE, 126, + "cam_strobe", NULL, NULL, NULL, + "gpio_126", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_VS, 95, + "cam_vs", NULL, NULL, NULL, + "gpio_95", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_WEN, 167, + "cam_wen", NULL, "cam_shutter", NULL, + "gpio_167", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA6, 76, + "dss_data6", NULL, "uart1_tx", NULL, + "gpio_76", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA7, 77, + "dss_data7", NULL, "uart1_rx", NULL, + "gpio_77", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA8, 78, + "dss_data8", NULL, NULL, NULL, + "gpio_78", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA9, 79, + "dss_data9", NULL, NULL, NULL, + "gpio_79", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_HSYNC, 67, + "dss_hsync", NULL, NULL, NULL, + "gpio_67", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_PCLK, 66, + "dss_pclk", NULL, NULL, NULL, + "gpio_66", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(ETK_CLK, 12, + "etk_clk", "mcbsp5_clkx", "sdmmc3_clk", "hsusb1_stp", + "gpio_12", "mm1_rxdp", "hsusb1_tll_stp", NULL), + _OMAP3_MUXENTRY(ETK_CTL, 13, + "etk_ctl", NULL, "sdmmc3_cmd", "hsusb1_clk", + "gpio_13", NULL, "hsusb1_tll_clk", NULL), + _OMAP3_MUXENTRY(ETK_D0, 14, + "etk_d0", "mcspi3_simo", "sdmmc3_dat4", "hsusb1_data0", + "gpio_14", "mm1_rxrcv", "hsusb1_tll_data0", NULL), + _OMAP3_MUXENTRY(ETK_D1, 15, + "etk_d1", "mcspi3_somi", NULL, "hsusb1_data1", + "gpio_15", "mm1_txse0", "hsusb1_tll_data1", NULL), + _OMAP3_MUXENTRY(ETK_D10, 24, + "etk_d10", NULL, "uart1_rx", "hsusb2_clk", + "gpio_24", NULL, "hsusb2_tll_clk", NULL), + _OMAP3_MUXENTRY(ETK_D11, 25, + "etk_d11", NULL, NULL, "hsusb2_stp", + "gpio_25", "mm2_rxdp", "hsusb2_tll_stp", NULL), + _OMAP3_MUXENTRY(ETK_D12, 26, + "etk_d12", NULL, NULL, "hsusb2_dir", + "gpio_26", NULL, "hsusb2_tll_dir", NULL), + _OMAP3_MUXENTRY(ETK_D13, 27, + "etk_d13", NULL, NULL, "hsusb2_nxt", + "gpio_27", "mm2_rxdm", "hsusb2_tll_nxt", NULL), + _OMAP3_MUXENTRY(ETK_D14, 28, + "etk_d14", NULL, NULL, "hsusb2_data0", + "gpio_28", "mm2_rxrcv", "hsusb2_tll_data0", NULL), + _OMAP3_MUXENTRY(ETK_D15, 29, + "etk_d15", NULL, NULL, "hsusb2_data1", + "gpio_29", "mm2_txse0", "hsusb2_tll_data1", NULL), + _OMAP3_MUXENTRY(ETK_D2, 16, + "etk_d2", "mcspi3_cs0", NULL, "hsusb1_data2", + "gpio_16", "mm1_txdat", "hsusb1_tll_data2", NULL), + _OMAP3_MUXENTRY(ETK_D3, 17, + "etk_d3", "mcspi3_clk", "sdmmc3_dat3", "hsusb1_data7", + "gpio_17", NULL, "hsusb1_tll_data7", NULL), + _OMAP3_MUXENTRY(ETK_D4, 18, + "etk_d4", "mcbsp5_dr", "sdmmc3_dat0", "hsusb1_data4", + "gpio_18", NULL, "hsusb1_tll_data4", NULL), + _OMAP3_MUXENTRY(ETK_D5, 19, + "etk_d5", "mcbsp5_fsx", "sdmmc3_dat1", "hsusb1_data5", + "gpio_19", NULL, "hsusb1_tll_data5", NULL), + _OMAP3_MUXENTRY(ETK_D6, 20, + "etk_d6", "mcbsp5_dx", "sdmmc3_dat2", "hsusb1_data6", + "gpio_20", NULL, "hsusb1_tll_data6", NULL), + _OMAP3_MUXENTRY(ETK_D7, 21, + "etk_d7", "mcspi3_cs1", "sdmmc3_dat7", "hsusb1_data3", + "gpio_21", "mm1_txen_n", "hsusb1_tll_data3", NULL), + _OMAP3_MUXENTRY(ETK_D8, 22, + "etk_d8", "sys_drm_msecure", "sdmmc3_dat6", "hsusb1_dir", + "gpio_22", NULL, "hsusb1_tll_dir", NULL), + _OMAP3_MUXENTRY(ETK_D9, 23, + "etk_d9", "sys_secure_indicator", "sdmmc3_dat5", "hsusb1_nxt", + "gpio_23", "mm1_rxdm", "hsusb1_tll_nxt", NULL), + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define omap3_cbb_subset NULL +#endif + +/* + * Balls for CBB package + * 515-pin s-PBGA Package, 0.50mm Ball Pitch (Top), 0.40mm Ball Pitch (Bottom) + */ +#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \ + && defined(CONFIG_OMAP_PACKAGE_CBB) +struct omap_ball __initdata omap3_cbb_ball[] = { + _OMAP3_BALLENTRY(CAM_D0, "ag17", NULL), + _OMAP3_BALLENTRY(CAM_D1, "ah17", NULL), + _OMAP3_BALLENTRY(CAM_D10, "b25", NULL), + _OMAP3_BALLENTRY(CAM_D11, "c26", NULL), + _OMAP3_BALLENTRY(CAM_D2, "b24", NULL), + _OMAP3_BALLENTRY(CAM_D3, "c24", NULL), + _OMAP3_BALLENTRY(CAM_D4, "d24", NULL), + _OMAP3_BALLENTRY(CAM_D5, "a25", NULL), + _OMAP3_BALLENTRY(CAM_D6, "k28", NULL), + _OMAP3_BALLENTRY(CAM_D7, "l28", NULL), + _OMAP3_BALLENTRY(CAM_D8, "k27", NULL), + _OMAP3_BALLENTRY(CAM_D9, "l27", NULL), + _OMAP3_BALLENTRY(CAM_FLD, "c23", NULL), + _OMAP3_BALLENTRY(CAM_HS, "a24", NULL), + _OMAP3_BALLENTRY(CAM_PCLK, "c27", NULL), + _OMAP3_BALLENTRY(CAM_STROBE, "d25", NULL), + _OMAP3_BALLENTRY(CAM_VS, "a23", NULL), + _OMAP3_BALLENTRY(CAM_WEN, "b23", NULL), + _OMAP3_BALLENTRY(CAM_XCLKA, "c25", NULL), + _OMAP3_BALLENTRY(CAM_XCLKB, "b26", NULL), + _OMAP3_BALLENTRY(CSI2_DX0, "ag19", NULL), + _OMAP3_BALLENTRY(CSI2_DX1, "ag18", NULL), + _OMAP3_BALLENTRY(CSI2_DY0, "ah19", NULL), + _OMAP3_BALLENTRY(CSI2_DY1, "ah18", NULL), + _OMAP3_BALLENTRY(DSS_ACBIAS, "e27", NULL), + _OMAP3_BALLENTRY(DSS_DATA0, "ag22", NULL), + _OMAP3_BALLENTRY(DSS_DATA1, "ah22", NULL), + _OMAP3_BALLENTRY(DSS_DATA10, "ad28", NULL), + _OMAP3_BALLENTRY(DSS_DATA11, "ad27", NULL), + _OMAP3_BALLENTRY(DSS_DATA12, "ab28", NULL), + _OMAP3_BALLENTRY(DSS_DATA13, "ab27", NULL), + _OMAP3_BALLENTRY(DSS_DATA14, "aa28", NULL), + _OMAP3_BALLENTRY(DSS_DATA15, "aa27", NULL), + _OMAP3_BALLENTRY(DSS_DATA16, "g25", NULL), + _OMAP3_BALLENTRY(DSS_DATA17, "h27", NULL), + _OMAP3_BALLENTRY(DSS_DATA18, "h26", NULL), + _OMAP3_BALLENTRY(DSS_DATA19, "h25", NULL), + _OMAP3_BALLENTRY(DSS_DATA2, "ag23", NULL), + _OMAP3_BALLENTRY(DSS_DATA20, "e28", NULL), + _OMAP3_BALLENTRY(DSS_DATA21, "j26", NULL), + _OMAP3_BALLENTRY(DSS_DATA22, "ac27", NULL), + _OMAP3_BALLENTRY(DSS_DATA23, "ac28", NULL), + _OMAP3_BALLENTRY(DSS_DATA3, "ah23", NULL), + _OMAP3_BALLENTRY(DSS_DATA4, "ag24", NULL), + _OMAP3_BALLENTRY(DSS_DATA5, "ah24", NULL), + _OMAP3_BALLENTRY(DSS_DATA6, "e26", NULL), + _OMAP3_BALLENTRY(DSS_DATA7, "f28", NULL), + _OMAP3_BALLENTRY(DSS_DATA8, "f27", NULL), + _OMAP3_BALLENTRY(DSS_DATA9, "g26", NULL), + _OMAP3_BALLENTRY(DSS_HSYNC, "d26", NULL), + _OMAP3_BALLENTRY(DSS_PCLK, "d28", NULL), + _OMAP3_BALLENTRY(DSS_VSYNC, "d27", NULL), + _OMAP3_BALLENTRY(ETK_CLK, "af10", NULL), + _OMAP3_BALLENTRY(ETK_CTL, "ae10", NULL), + _OMAP3_BALLENTRY(ETK_D0, "af11", NULL), + _OMAP3_BALLENTRY(ETK_D1, "ag12", NULL), + _OMAP3_BALLENTRY(ETK_D10, "ae7", NULL), + _OMAP3_BALLENTRY(ETK_D11, "af7", NULL), + _OMAP3_BALLENTRY(ETK_D12, "ag7", NULL), + _OMAP3_BALLENTRY(ETK_D13, "ah7", NULL), + _OMAP3_BALLENTRY(ETK_D14, "ag8", NULL), + _OMAP3_BALLENTRY(ETK_D15, "ah8", NULL), + _OMAP3_BALLENTRY(ETK_D2, "ah12", NULL), + _OMAP3_BALLENTRY(ETK_D3, "ae13", NULL), + _OMAP3_BALLENTRY(ETK_D4, "ae11", NULL), + _OMAP3_BALLENTRY(ETK_D5, "ah9", NULL), + _OMAP3_BALLENTRY(ETK_D6, "af13", NULL), + _OMAP3_BALLENTRY(ETK_D7, "ah14", NULL), + _OMAP3_BALLENTRY(ETK_D8, "af9", NULL), + _OMAP3_BALLENTRY(ETK_D9, "ag9", NULL), + _OMAP3_BALLENTRY(GPMC_A1, "n4", "ac15"), + _OMAP3_BALLENTRY(GPMC_A10, "k3", "ab19"), + _OMAP3_BALLENTRY(GPMC_A2, "m4", "ab15"), + _OMAP3_BALLENTRY(GPMC_A3, "l4", "ac16"), + _OMAP3_BALLENTRY(GPMC_A4, "k4", "ab16"), + _OMAP3_BALLENTRY(GPMC_A5, "t3", "ac17"), + _OMAP3_BALLENTRY(GPMC_A6, "r3", "ab17"), + _OMAP3_BALLENTRY(GPMC_A7, "n3", "ac18"), + _OMAP3_BALLENTRY(GPMC_A8, "m3", "ab18"), + _OMAP3_BALLENTRY(GPMC_A9, "l3", "ac19"), + _OMAP3_BALLENTRY(GPMC_CLK, "t4", "w2"), + _OMAP3_BALLENTRY(GPMC_D10, "p1", "ab4"), + _OMAP3_BALLENTRY(GPMC_D11, "r1", "ac4"), + _OMAP3_BALLENTRY(GPMC_D12, "r2", "ab6"), + _OMAP3_BALLENTRY(GPMC_D13, "t2", "ac6"), + _OMAP3_BALLENTRY(GPMC_D14, "w1", "ab7"), + _OMAP3_BALLENTRY(GPMC_D15, "y1", "ac7"), + _OMAP3_BALLENTRY(GPMC_D8, "h2", "ab3"), + _OMAP3_BALLENTRY(GPMC_D9, "k2", "ac3"), + _OMAP3_BALLENTRY(GPMC_NBE0_CLE, "g3", "ac12"), + _OMAP3_BALLENTRY(GPMC_NBE1, "u3", NULL), + _OMAP3_BALLENTRY(GPMC_NCS1, "h3", "y1"), + _OMAP3_BALLENTRY(GPMC_NCS2, "v8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS3, "u8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS4, "t8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS5, "r8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS6, "p8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS7, "n8", NULL), + _OMAP3_BALLENTRY(GPMC_NWP, "h1", "ab10"), + _OMAP3_BALLENTRY(GPMC_WAIT1, "l8", "ac10"), + _OMAP3_BALLENTRY(GPMC_WAIT2, "k8", NULL), + _OMAP3_BALLENTRY(GPMC_WAIT3, "j8", NULL), + _OMAP3_BALLENTRY(HDQ_SIO, "j25", NULL), + _OMAP3_BALLENTRY(HSUSB0_CLK, "t28", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA0, "t27", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA1, "u28", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA2, "u27", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA3, "u26", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA4, "u25", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA5, "v28", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA6, "v27", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA7, "v26", NULL), + _OMAP3_BALLENTRY(HSUSB0_DIR, "r28", NULL), + _OMAP3_BALLENTRY(HSUSB0_NXT, "t26", NULL), + _OMAP3_BALLENTRY(HSUSB0_STP, "t25", NULL), + _OMAP3_BALLENTRY(I2C2_SCL, "af15", NULL), + _OMAP3_BALLENTRY(I2C2_SDA, "ae15", NULL), + _OMAP3_BALLENTRY(I2C3_SCL, "af14", NULL), + _OMAP3_BALLENTRY(I2C3_SDA, "ag14", NULL), + _OMAP3_BALLENTRY(I2C4_SCL, "ad26", NULL), + _OMAP3_BALLENTRY(I2C4_SDA, "ae26", NULL), + _OMAP3_BALLENTRY(JTAG_EMU0, "aa11", NULL), + _OMAP3_BALLENTRY(JTAG_EMU1, "aa10", NULL), + _OMAP3_BALLENTRY(MCBSP1_CLKR, "y21", NULL), + _OMAP3_BALLENTRY(MCBSP1_CLKX, "w21", NULL), + _OMAP3_BALLENTRY(MCBSP1_DR, "u21", NULL), + _OMAP3_BALLENTRY(MCBSP1_DX, "v21", NULL), + _OMAP3_BALLENTRY(MCBSP1_FSR, "aa21", NULL), + _OMAP3_BALLENTRY(MCBSP1_FSX, "k26", NULL), + _OMAP3_BALLENTRY(MCBSP2_CLKX, "n21", NULL), + _OMAP3_BALLENTRY(MCBSP2_DR, "r21", NULL), + _OMAP3_BALLENTRY(MCBSP2_DX, "m21", NULL), + _OMAP3_BALLENTRY(MCBSP2_FSX, "p21", NULL), + _OMAP3_BALLENTRY(MCBSP3_CLKX, "af5", NULL), + _OMAP3_BALLENTRY(MCBSP3_DR, "ae6", NULL), + _OMAP3_BALLENTRY(MCBSP3_DX, "af6", NULL), + _OMAP3_BALLENTRY(MCBSP3_FSX, "ae5", NULL), + _OMAP3_BALLENTRY(MCBSP4_CLKX, "ae1", NULL), + _OMAP3_BALLENTRY(MCBSP4_DR, "ad1", NULL), + _OMAP3_BALLENTRY(MCBSP4_DX, "ad2", NULL), + _OMAP3_BALLENTRY(MCBSP4_FSX, "ac1", NULL), + _OMAP3_BALLENTRY(MCBSP_CLKS, "t21", NULL), + _OMAP3_BALLENTRY(MCSPI1_CLK, "ab3", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS0, "ac2", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS1, "ac3", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS2, "ab1", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS3, "ab2", NULL), + _OMAP3_BALLENTRY(MCSPI1_SIMO, "ab4", NULL), + _OMAP3_BALLENTRY(MCSPI1_SOMI, "aa4", NULL), + _OMAP3_BALLENTRY(MCSPI2_CLK, "aa3", NULL), + _OMAP3_BALLENTRY(MCSPI2_CS0, "y4", NULL), + _OMAP3_BALLENTRY(MCSPI2_CS1, "v3", NULL), + _OMAP3_BALLENTRY(MCSPI2_SIMO, "y2", NULL), + _OMAP3_BALLENTRY(MCSPI2_SOMI, "y3", NULL), + _OMAP3_BALLENTRY(SDMMC1_CLK, "n28", NULL), + _OMAP3_BALLENTRY(SDMMC1_CMD, "m27", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT0, "n27", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT1, "n26", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT2, "n25", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT3, "p28", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT4, "p27", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT5, "p26", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT6, "r27", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT7, "r25", NULL), + _OMAP3_BALLENTRY(SDMMC2_CLK, "ae2", NULL), + _OMAP3_BALLENTRY(SDMMC2_CMD, "ag5", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT0, "ah5", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT1, "ah4", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT2, "ag4", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT3, "af4", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT4, "ae4", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT5, "ah3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT6, "af3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT7, "ae3", NULL), + _OMAP3_BALLENTRY(SYS_BOOT0, "ah26", NULL), + _OMAP3_BALLENTRY(SYS_BOOT1, "ag26", NULL), + _OMAP3_BALLENTRY(SYS_BOOT2, "ae14", NULL), + _OMAP3_BALLENTRY(SYS_BOOT3, "af18", NULL), + _OMAP3_BALLENTRY(SYS_BOOT4, "af19", NULL), + _OMAP3_BALLENTRY(SYS_BOOT5, "ae21", NULL), + _OMAP3_BALLENTRY(SYS_BOOT6, "af21", NULL), + _OMAP3_BALLENTRY(SYS_CLKOUT1, "ag25", NULL), + _OMAP3_BALLENTRY(SYS_CLKOUT2, "ae22", NULL), + _OMAP3_BALLENTRY(SYS_CLKREQ, "af25", NULL), + _OMAP3_BALLENTRY(SYS_NIRQ, "af26", NULL), + _OMAP3_BALLENTRY(SYS_NRESWARM, "af24", NULL), + _OMAP3_BALLENTRY(SYS_OFF_MODE, "af22", NULL), + _OMAP3_BALLENTRY(UART1_CTS, "w8", NULL), + _OMAP3_BALLENTRY(UART1_RTS, "aa9", NULL), + _OMAP3_BALLENTRY(UART1_RX, "y8", NULL), + _OMAP3_BALLENTRY(UART1_TX, "aa8", NULL), + _OMAP3_BALLENTRY(UART2_CTS, "ab26", NULL), + _OMAP3_BALLENTRY(UART2_RTS, "ab25", NULL), + _OMAP3_BALLENTRY(UART2_RX, "ad25", NULL), + _OMAP3_BALLENTRY(UART2_TX, "aa25", NULL), + _OMAP3_BALLENTRY(UART3_CTS_RCTX, "h18", NULL), + _OMAP3_BALLENTRY(UART3_RTS_SD, "h19", NULL), + _OMAP3_BALLENTRY(UART3_RX_IRRX, "h20", NULL), + _OMAP3_BALLENTRY(UART3_TX_IRTX, "h21", NULL), + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define omap3_cbb_ball NULL +#endif + +int __init omap3_mux_init(struct omap_board_mux *board_subset, int flags) +{ + struct omap_mux *package_subset; + struct omap_ball *package_balls; + + switch (flags & OMAP_PACKAGE_MASK) { + case (OMAP_PACKAGE_CBC): + package_subset = omap3_cbc_subset; + package_balls = omap3_cbc_ball; + break; + case (OMAP_PACKAGE_CBB): + package_subset = omap3_cbb_subset; + package_balls = omap3_cbb_ball; + break; + case (OMAP_PACKAGE_CUS): + package_subset = omap3_cus_subset; + package_balls = omap3_cus_ball; + break; + default: + printk(KERN_ERR "mux: Unknown omap package, mux disabled\n"); + return -EINVAL; + } + + return omap_mux_init(OMAP3_CONTROL_PADCONF_MUX_PBASE, + OMAP3_CONTROL_PADCONF_MUX_SIZE, + omap3_muxmodes, package_subset, board_subset, + package_balls); +} diff --git a/arch/arm/mach-omap2/mux34xx.h b/arch/arm/mach-omap2/mux34xx.h new file mode 100644 index 0000000..a7cc871 --- /dev/null +++ b/arch/arm/mach-omap2/mux34xx.h @@ -0,0 +1,356 @@ +/* + * Copyright (C) 2009 Nokia + * Copyright (C) 2009 Texas Instruments + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define OMAP3_CONTROL_PADCONF_MUX_PBASE 0x48002030LU + +#define OMAP3_MUX(mode0, mux_value) \ +{ \ + .reg_offset = (OMAP3_CONTROL_PADCONF_##mode0##_OFFSET), \ + .value = (mux_value), \ +} + +/* + * OMAP3 CONTROL_PADCONF* register offsets for pin-muxing + * + * Extracted from the TRM. Add 0x48002030 to these values to get the + * absolute addresses. The name in the macro is the mode-0 name of + * the pin. NOTE: These registers are 16-bits wide. + * + * Note that 34XX TRM uses MMC instead of SDMMC and SAD2D instead + * of CHASSIS for some registers. For the defines, we follow the + * 36XX naming, and use SDMMC and CHASSIS. + */ +#define OMAP3_CONTROL_PADCONF_SDRC_D0_OFFSET 0x000 +#define OMAP3_CONTROL_PADCONF_SDRC_D1_OFFSET 0x002 +#define OMAP3_CONTROL_PADCONF_SDRC_D2_OFFSET 0x004 +#define OMAP3_CONTROL_PADCONF_SDRC_D3_OFFSET 0x006 +#define OMAP3_CONTROL_PADCONF_SDRC_D4_OFFSET 0x008 +#define OMAP3_CONTROL_PADCONF_SDRC_D5_OFFSET 0x00a +#define OMAP3_CONTROL_PADCONF_SDRC_D6_OFFSET 0x00c +#define OMAP3_CONTROL_PADCONF_SDRC_D7_OFFSET 0x00e +#define OMAP3_CONTROL_PADCONF_SDRC_D8_OFFSET 0x010 +#define OMAP3_CONTROL_PADCONF_SDRC_D9_OFFSET 0x012 +#define OMAP3_CONTROL_PADCONF_SDRC_D10_OFFSET 0x014 +#define OMAP3_CONTROL_PADCONF_SDRC_D11_OFFSET 0x016 +#define OMAP3_CONTROL_PADCONF_SDRC_D12_OFFSET 0x018 +#define OMAP3_CONTROL_PADCONF_SDRC_D13_OFFSET 0x01a +#define OMAP3_CONTROL_PADCONF_SDRC_D14_OFFSET 0x01c +#define OMAP3_CONTROL_PADCONF_SDRC_D15_OFFSET 0x01e +#define OMAP3_CONTROL_PADCONF_SDRC_D16_OFFSET 0x020 +#define OMAP3_CONTROL_PADCONF_SDRC_D17_OFFSET 0x022 +#define OMAP3_CONTROL_PADCONF_SDRC_D18_OFFSET 0x024 +#define OMAP3_CONTROL_PADCONF_SDRC_D19_OFFSET 0x026 +#define OMAP3_CONTROL_PADCONF_SDRC_D20_OFFSET 0x028 +#define OMAP3_CONTROL_PADCONF_SDRC_D21_OFFSET 0x02a +#define OMAP3_CONTROL_PADCONF_SDRC_D22_OFFSET 0x02c +#define OMAP3_CONTROL_PADCONF_SDRC_D23_OFFSET 0x02e +#define OMAP3_CONTROL_PADCONF_SDRC_D24_OFFSET 0x030 +#define OMAP3_CONTROL_PADCONF_SDRC_D25_OFFSET 0x032 +#define OMAP3_CONTROL_PADCONF_SDRC_D26_OFFSET 0x034 +#define OMAP3_CONTROL_PADCONF_SDRC_D27_OFFSET 0x036 +#define OMAP3_CONTROL_PADCONF_SDRC_D28_OFFSET 0x038 +#define OMAP3_CONTROL_PADCONF_SDRC_D29_OFFSET 0x03a +#define OMAP3_CONTROL_PADCONF_SDRC_D30_OFFSET 0x03c +#define OMAP3_CONTROL_PADCONF_SDRC_D31_OFFSET 0x03e +#define OMAP3_CONTROL_PADCONF_SDRC_CLK_OFFSET 0x040 +#define OMAP3_CONTROL_PADCONF_SDRC_DQS0_OFFSET 0x042 +#define OMAP3_CONTROL_PADCONF_SDRC_DQS1_OFFSET 0x044 +#define OMAP3_CONTROL_PADCONF_SDRC_DQS2_OFFSET 0x046 +#define OMAP3_CONTROL_PADCONF_SDRC_DQS3_OFFSET 0x048 +#define OMAP3_CONTROL_PADCONF_GPMC_A1_OFFSET 0x04a +#define OMAP3_CONTROL_PADCONF_GPMC_A2_OFFSET 0x04c +#define OMAP3_CONTROL_PADCONF_GPMC_A3_OFFSET 0x04e +#define OMAP3_CONTROL_PADCONF_GPMC_A4_OFFSET 0x050 +#define OMAP3_CONTROL_PADCONF_GPMC_A5_OFFSET 0x052 +#define OMAP3_CONTROL_PADCONF_GPMC_A6_OFFSET 0x054 +#define OMAP3_CONTROL_PADCONF_GPMC_A7_OFFSET 0x056 +#define OMAP3_CONTROL_PADCONF_GPMC_A8_OFFSET 0x058 +#define OMAP3_CONTROL_PADCONF_GPMC_A9_OFFSET 0x05a +#define OMAP3_CONTROL_PADCONF_GPMC_A10_OFFSET 0x05c +#define OMAP3_CONTROL_PADCONF_GPMC_D0_OFFSET 0x05e +#define OMAP3_CONTROL_PADCONF_GPMC_D1_OFFSET 0x060 +#define OMAP3_CONTROL_PADCONF_GPMC_D2_OFFSET 0x062 +#define OMAP3_CONTROL_PADCONF_GPMC_D3_OFFSET 0x064 +#define OMAP3_CONTROL_PADCONF_GPMC_D4_OFFSET 0x066 +#define OMAP3_CONTROL_PADCONF_GPMC_D5_OFFSET 0x068 +#define OMAP3_CONTROL_PADCONF_GPMC_D6_OFFSET 0x06a +#define OMAP3_CONTROL_PADCONF_GPMC_D7_OFFSET 0x06c +#define OMAP3_CONTROL_PADCONF_GPMC_D8_OFFSET 0x06e +#define OMAP3_CONTROL_PADCONF_GPMC_D9_OFFSET 0x070 +#define OMAP3_CONTROL_PADCONF_GPMC_D10_OFFSET 0x072 +#define OMAP3_CONTROL_PADCONF_GPMC_D11_OFFSET 0x074 +#define OMAP3_CONTROL_PADCONF_GPMC_D12_OFFSET 0x076 +#define OMAP3_CONTROL_PADCONF_GPMC_D13_OFFSET 0x078 +#define OMAP3_CONTROL_PADCONF_GPMC_D14_OFFSET 0x07a +#define OMAP3_CONTROL_PADCONF_GPMC_D15_OFFSET 0x07c +#define OMAP3_CONTROL_PADCONF_GPMC_NCS0_OFFSET 0x07e +#define OMAP3_CONTROL_PADCONF_GPMC_NCS1_OFFSET 0x080 +#define OMAP3_CONTROL_PADCONF_GPMC_NCS2_OFFSET 0x082 +#define OMAP3_CONTROL_PADCONF_GPMC_NCS3_OFFSET 0x084 +#define OMAP3_CONTROL_PADCONF_GPMC_NCS4_OFFSET 0x086 +#define OMAP3_CONTROL_PADCONF_GPMC_NCS5_OFFSET 0x088 +#define OMAP3_CONTROL_PADCONF_GPMC_NCS6_OFFSET 0x08a +#define OMAP3_CONTROL_PADCONF_GPMC_NCS7_OFFSET 0x08c +#define OMAP3_CONTROL_PADCONF_GPMC_CLK_OFFSET 0x08e +#define OMAP3_CONTROL_PADCONF_GPMC_NADV_ALE_OFFSET 0x090 +#define OMAP3_CONTROL_PADCONF_GPMC_NOE_OFFSET 0x092 +#define OMAP3_CONTROL_PADCONF_GPMC_NWE_OFFSET 0x094 +#define OMAP3_CONTROL_PADCONF_GPMC_NBE0_CLE_OFFSET 0x096 +#define OMAP3_CONTROL_PADCONF_GPMC_NBE1_OFFSET 0x098 +#define OMAP3_CONTROL_PADCONF_GPMC_NWP_OFFSET 0x09a +#define OMAP3_CONTROL_PADCONF_GPMC_WAIT0_OFFSET 0x09c +#define OMAP3_CONTROL_PADCONF_GPMC_WAIT1_OFFSET 0x09e +#define OMAP3_CONTROL_PADCONF_GPMC_WAIT2_OFFSET 0x0a0 +#define OMAP3_CONTROL_PADCONF_GPMC_WAIT3_OFFSET 0x0a2 +#define OMAP3_CONTROL_PADCONF_DSS_PCLK_OFFSET 0x0a4 +#define OMAP3_CONTROL_PADCONF_DSS_HSYNC_OFFSET 0x0a6 +#define OMAP3_CONTROL_PADCONF_DSS_VSYNC_OFFSET 0x0a8 +#define OMAP3_CONTROL_PADCONF_DSS_ACBIAS_OFFSET 0x0aa +#define OMAP3_CONTROL_PADCONF_DSS_DATA0_OFFSET 0x0ac +#define OMAP3_CONTROL_PADCONF_DSS_DATA1_OFFSET 0x0ae +#define OMAP3_CONTROL_PADCONF_DSS_DATA2_OFFSET 0x0b0 +#define OMAP3_CONTROL_PADCONF_DSS_DATA3_OFFSET 0x0b2 +#define OMAP3_CONTROL_PADCONF_DSS_DATA4_OFFSET 0x0b4 +#define OMAP3_CONTROL_PADCONF_DSS_DATA5_OFFSET 0x0b6 +#define OMAP3_CONTROL_PADCONF_DSS_DATA6_OFFSET 0x0b8 +#define OMAP3_CONTROL_PADCONF_DSS_DATA7_OFFSET 0x0ba +#define OMAP3_CONTROL_PADCONF_DSS_DATA8_OFFSET 0x0bc +#define OMAP3_CONTROL_PADCONF_DSS_DATA9_OFFSET 0x0be +#define OMAP3_CONTROL_PADCONF_DSS_DATA10_OFFSET 0x0c0 +#define OMAP3_CONTROL_PADCONF_DSS_DATA11_OFFSET 0x0c2 +#define OMAP3_CONTROL_PADCONF_DSS_DATA12_OFFSET 0x0c4 +#define OMAP3_CONTROL_PADCONF_DSS_DATA13_OFFSET 0x0c6 +#define OMAP3_CONTROL_PADCONF_DSS_DATA14_OFFSET 0x0c8 +#define OMAP3_CONTROL_PADCONF_DSS_DATA15_OFFSET 0x0ca +#define OMAP3_CONTROL_PADCONF_DSS_DATA16_OFFSET 0x0cc +#define OMAP3_CONTROL_PADCONF_DSS_DATA17_OFFSET 0x0ce +#define OMAP3_CONTROL_PADCONF_DSS_DATA18_OFFSET 0x0d0 +#define OMAP3_CONTROL_PADCONF_DSS_DATA19_OFFSET 0x0d2 +#define OMAP3_CONTROL_PADCONF_DSS_DATA20_OFFSET 0x0d4 +#define OMAP3_CONTROL_PADCONF_DSS_DATA21_OFFSET 0x0d6 +#define OMAP3_CONTROL_PADCONF_DSS_DATA22_OFFSET 0x0d8 +#define OMAP3_CONTROL_PADCONF_DSS_DATA23_OFFSET 0x0da +#define OMAP3_CONTROL_PADCONF_CAM_HS_OFFSET 0x0dc +#define OMAP3_CONTROL_PADCONF_CAM_VS_OFFSET 0x0de +#define OMAP3_CONTROL_PADCONF_CAM_XCLKA_OFFSET 0x0e0 +#define OMAP3_CONTROL_PADCONF_CAM_PCLK_OFFSET 0x0e2 +#define OMAP3_CONTROL_PADCONF_CAM_FLD_OFFSET 0x0e4 +#define OMAP3_CONTROL_PADCONF_CAM_D0_OFFSET 0x0e6 +#define OMAP3_CONTROL_PADCONF_CAM_D1_OFFSET 0x0e8 +#define OMAP3_CONTROL_PADCONF_CAM_D2_OFFSET 0x0ea +#define OMAP3_CONTROL_PADCONF_CAM_D3_OFFSET 0x0ec +#define OMAP3_CONTROL_PADCONF_CAM_D4_OFFSET 0x0ee +#define OMAP3_CONTROL_PADCONF_CAM_D5_OFFSET 0x0f0 +#define OMAP3_CONTROL_PADCONF_CAM_D6_OFFSET 0x0f2 +#define OMAP3_CONTROL_PADCONF_CAM_D7_OFFSET 0x0f4 +#define OMAP3_CONTROL_PADCONF_CAM_D8_OFFSET 0x0f6 +#define OMAP3_CONTROL_PADCONF_CAM_D9_OFFSET 0x0f8 +#define OMAP3_CONTROL_PADCONF_CAM_D10_OFFSET 0x0fa +#define OMAP3_CONTROL_PADCONF_CAM_D11_OFFSET 0x0fc +#define OMAP3_CONTROL_PADCONF_CAM_XCLKB_OFFSET 0x0fe +#define OMAP3_CONTROL_PADCONF_CAM_WEN_OFFSET 0x100 +#define OMAP3_CONTROL_PADCONF_CAM_STROBE_OFFSET 0x102 +#define OMAP3_CONTROL_PADCONF_CSI2_DX0_OFFSET 0x104 +#define OMAP3_CONTROL_PADCONF_CSI2_DY0_OFFSET 0x106 +#define OMAP3_CONTROL_PADCONF_CSI2_DX1_OFFSET 0x108 +#define OMAP3_CONTROL_PADCONF_CSI2_DY1_OFFSET 0x10a +#define OMAP3_CONTROL_PADCONF_MCBSP2_FSX_OFFSET 0x10c +#define OMAP3_CONTROL_PADCONF_MCBSP2_CLKX_OFFSET 0x10e +#define OMAP3_CONTROL_PADCONF_MCBSP2_DR_OFFSET 0x110 +#define OMAP3_CONTROL_PADCONF_MCBSP2_DX_OFFSET 0x112 +#define OMAP3_CONTROL_PADCONF_SDMMC1_CLK_OFFSET 0x114 +#define OMAP3_CONTROL_PADCONF_SDMMC1_CMD_OFFSET 0x116 +#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT0_OFFSET 0x118 +#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT1_OFFSET 0x11a +#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT2_OFFSET 0x11c +#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT3_OFFSET 0x11e +#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT4_OFFSET 0x120 +#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT5_OFFSET 0x122 +#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT6_OFFSET 0x124 +#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT7_OFFSET 0x126 +#define OMAP3_CONTROL_PADCONF_SDMMC2_CLK_OFFSET 0x128 +#define OMAP3_CONTROL_PADCONF_SDMMC2_CMD_OFFSET 0x12a +#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT0_OFFSET 0x12c +#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT1_OFFSET 0x12e +#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT2_OFFSET 0x130 +#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT3_OFFSET 0x132 +#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT4_OFFSET 0x134 +#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT5_OFFSET 0x136 +#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT6_OFFSET 0x138 +#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT7_OFFSET 0x13a +#define OMAP3_CONTROL_PADCONF_MCBSP3_DX_OFFSET 0x13c +#define OMAP3_CONTROL_PADCONF_MCBSP3_DR_OFFSET 0x13e +#define OMAP3_CONTROL_PADCONF_MCBSP3_CLKX_OFFSET 0x140 +#define OMAP3_CONTROL_PADCONF_MCBSP3_FSX_OFFSET 0x142 +#define OMAP3_CONTROL_PADCONF_UART2_CTS_OFFSET 0x144 +#define OMAP3_CONTROL_PADCONF_UART2_RTS_OFFSET 0x146 +#define OMAP3_CONTROL_PADCONF_UART2_TX_OFFSET 0x148 +#define OMAP3_CONTROL_PADCONF_UART2_RX_OFFSET 0x14a +#define OMAP3_CONTROL_PADCONF_UART1_TX_OFFSET 0x14c +#define OMAP3_CONTROL_PADCONF_UART1_RTS_OFFSET 0x14e +#define OMAP3_CONTROL_PADCONF_UART1_CTS_OFFSET 0x150 +#define OMAP3_CONTROL_PADCONF_UART1_RX_OFFSET 0x152 +#define OMAP3_CONTROL_PADCONF_MCBSP4_CLKX_OFFSET 0x154 +#define OMAP3_CONTROL_PADCONF_MCBSP4_DR_OFFSET 0x156 +#define OMAP3_CONTROL_PADCONF_MCBSP4_DX_OFFSET 0x158 +#define OMAP3_CONTROL_PADCONF_MCBSP4_FSX_OFFSET 0x15a +#define OMAP3_CONTROL_PADCONF_MCBSP1_CLKR_OFFSET 0x15c +#define OMAP3_CONTROL_PADCONF_MCBSP1_FSR_OFFSET 0x15e +#define OMAP3_CONTROL_PADCONF_MCBSP1_DX_OFFSET 0x160 +#define OMAP3_CONTROL_PADCONF_MCBSP1_DR_OFFSET 0x162 +#define OMAP3_CONTROL_PADCONF_MCBSP_CLKS_OFFSET 0x164 +#define OMAP3_CONTROL_PADCONF_MCBSP1_FSX_OFFSET 0x166 +#define OMAP3_CONTROL_PADCONF_MCBSP1_CLKX_OFFSET 0x168 +#define OMAP3_CONTROL_PADCONF_UART3_CTS_RCTX_OFFSET 0x16a +#define OMAP3_CONTROL_PADCONF_UART3_RTS_SD_OFFSET 0x16c +#define OMAP3_CONTROL_PADCONF_UART3_RX_IRRX_OFFSET 0x16e +#define OMAP3_CONTROL_PADCONF_UART3_TX_IRTX_OFFSET 0x170 +#define OMAP3_CONTROL_PADCONF_HSUSB0_CLK_OFFSET 0x172 +#define OMAP3_CONTROL_PADCONF_HSUSB0_STP_OFFSET 0x174 +#define OMAP3_CONTROL_PADCONF_HSUSB0_DIR_OFFSET 0x176 +#define OMAP3_CONTROL_PADCONF_HSUSB0_NXT_OFFSET 0x178 +#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA0_OFFSET 0x17a +#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA1_OFFSET 0x17c +#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA2_OFFSET 0x17e +#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA3_OFFSET 0x180 +#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA4_OFFSET 0x182 +#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA5_OFFSET 0x184 +#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA6_OFFSET 0x186 +#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA7_OFFSET 0x188 +#define OMAP3_CONTROL_PADCONF_I2C1_SCL_OFFSET 0x18a +#define OMAP3_CONTROL_PADCONF_I2C1_SDA_OFFSET 0x18c +#define OMAP3_CONTROL_PADCONF_I2C2_SCL_OFFSET 0x18e +#define OMAP3_CONTROL_PADCONF_I2C2_SDA_OFFSET 0x190 +#define OMAP3_CONTROL_PADCONF_I2C3_SCL_OFFSET 0x192 +#define OMAP3_CONTROL_PADCONF_I2C3_SDA_OFFSET 0x194 +#define OMAP3_CONTROL_PADCONF_HDQ_SIO_OFFSET 0x196 +#define OMAP3_CONTROL_PADCONF_MCSPI1_CLK_OFFSET 0x198 +#define OMAP3_CONTROL_PADCONF_MCSPI1_SIMO_OFFSET 0x19a +#define OMAP3_CONTROL_PADCONF_MCSPI1_SOMI_OFFSET 0x19c +#define OMAP3_CONTROL_PADCONF_MCSPI1_CS0_OFFSET 0x19e +#define OMAP3_CONTROL_PADCONF_MCSPI1_CS1_OFFSET 0x1a0 +#define OMAP3_CONTROL_PADCONF_MCSPI1_CS2_OFFSET 0x1a2 +#define OMAP3_CONTROL_PADCONF_MCSPI1_CS3_OFFSET 0x1a4 +#define OMAP3_CONTROL_PADCONF_MCSPI2_CLK_OFFSET 0x1a6 +#define OMAP3_CONTROL_PADCONF_MCSPI2_SIMO_OFFSET 0x1a8 +#define OMAP3_CONTROL_PADCONF_MCSPI2_SOMI_OFFSET 0x1aa +#define OMAP3_CONTROL_PADCONF_MCSPI2_CS0_OFFSET 0x1ac +#define OMAP3_CONTROL_PADCONF_MCSPI2_CS1_OFFSET 0x1ae +#define OMAP3_CONTROL_PADCONF_SYS_NIRQ_OFFSET 0x1b0 +#define OMAP3_CONTROL_PADCONF_SYS_CLKOUT2_OFFSET 0x1b2 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD0_OFFSET 0x1b4 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD1_OFFSET 0x1b6 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD2_OFFSET 0x1b8 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD3_OFFSET 0x1ba +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD4_OFFSET 0x1bc +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD5_OFFSET 0x1be +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD6_OFFSET 0x1c0 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD7_OFFSET 0x1c2 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD8_OFFSET 0x1c4 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD9_OFFSET 0x1c6 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD10_OFFSET 0x1c8 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD11_OFFSET 0x1ca +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD12_OFFSET 0x1cc +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD13_OFFSET 0x1ce +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD14_OFFSET 0x1d0 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD15_OFFSET 0x1d2 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD16_OFFSET 0x1d4 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD17_OFFSET 0x1d6 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD18_OFFSET 0x1d8 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD19_OFFSET 0x1da +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD20_OFFSET 0x1dc +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD21_OFFSET 0x1de +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD22_OFFSET 0x1e0 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD23_OFFSET 0x1e2 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD24_OFFSET 0x1e4 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD25_OFFSET 0x1e6 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD26_OFFSET 0x1e8 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD27_OFFSET 0x1ea +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD28_OFFSET 0x1ec +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD29_OFFSET 0x1ee +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD30_OFFSET 0x1f0 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD31_OFFSET 0x1f2 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD32_OFFSET 0x1f4 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD33_OFFSET 0x1f6 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD34_OFFSET 0x1f8 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD35_OFFSET 0x1fa +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD36_OFFSET 0x1fc +/* Note that 34xx TRM has SAD2D instead of CHASSIS for these */ +#define OMAP3_CONTROL_PADCONF_CHASSIS_CLK26MI_OFFSET 0x1fe +#define OMAP3_CONTROL_PADCONF_CHASSIS_NRESPWRON_OFFSET 0x200 +#define OMAP3_CONTROL_PADCONF_CHASSIS_NRESWARW_OFFSET 0x202 +#define OMAP3_CONTROL_PADCONF_CHASSIS_NIRQ_OFFSET 0x204 +#define OMAP3_CONTROL_PADCONF_CHASSIS_FIQ_OFFSET 0x206 +#define OMAP3_CONTROL_PADCONF_CHASSIS_ARMIRQ_OFFSET 0x208 +#define OMAP3_CONTROL_PADCONF_CHASSIS_IVAIRQ_OFFSET 0x20a +#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ0_OFFSET 0x20c +#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ1_OFFSET 0x20e +#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ2_OFFSET 0x210 +#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ3_OFFSET 0x212 +#define OMAP3_CONTROL_PADCONF_CHASSIS_NTRST_OFFSET 0x214 +#define OMAP3_CONTROL_PADCONF_CHASSIS_TDI_OFFSET 0x216 +#define OMAP3_CONTROL_PADCONF_CHASSIS_TDO_OFFSET 0x218 +#define OMAP3_CONTROL_PADCONF_CHASSIS_TMS_OFFSET 0x21a +#define OMAP3_CONTROL_PADCONF_CHASSIS_TCK_OFFSET 0x21c +#define OMAP3_CONTROL_PADCONF_CHASSIS_RTCK_OFFSET 0x21e +#define OMAP3_CONTROL_PADCONF_CHASSIS_MSTDBY_OFFSET 0x220 +#define OMAP3_CONTROL_PADCONF_CHASSIS_IDLEREQ_OFFSET 0x222 +#define OMAP3_CONTROL_PADCONF_CHASSIS_IDLEACK_OFFSET 0x224 +#define OMAP3_CONTROL_PADCONF_SAD2D_MWRITE_OFFSET 0x226 +#define OMAP3_CONTROL_PADCONF_SAD2D_SWRITE_OFFSET 0x228 +#define OMAP3_CONTROL_PADCONF_SAD2D_MREAD_OFFSET 0x22a +#define OMAP3_CONTROL_PADCONF_SAD2D_SREAD_OFFSET 0x22c +#define OMAP3_CONTROL_PADCONF_SAD2D_MBUSFLAG_OFFSET 0x22e +#define OMAP3_CONTROL_PADCONF_SAD2D_SBUSFLAG_OFFSET 0x230 +#define OMAP3_CONTROL_PADCONF_SDRC_CKE0_OFFSET 0x232 +#define OMAP3_CONTROL_PADCONF_SDRC_CKE1_OFFSET 0x234 +#define OMAP3_CONTROL_PADCONF_ETK_CLK_OFFSET 0x5a8 +#define OMAP3_CONTROL_PADCONF_ETK_CTL_OFFSET 0x5aa +#define OMAP3_CONTROL_PADCONF_ETK_D0_OFFSET 0x5ac +#define OMAP3_CONTROL_PADCONF_ETK_D1_OFFSET 0x5ae +#define OMAP3_CONTROL_PADCONF_ETK_D2_OFFSET 0x5b0 +#define OMAP3_CONTROL_PADCONF_ETK_D3_OFFSET 0x5b2 +#define OMAP3_CONTROL_PADCONF_ETK_D4_OFFSET 0x5b4 +#define OMAP3_CONTROL_PADCONF_ETK_D5_OFFSET 0x5b6 +#define OMAP3_CONTROL_PADCONF_ETK_D6_OFFSET 0x5b8 +#define OMAP3_CONTROL_PADCONF_ETK_D7_OFFSET 0x5ba +#define OMAP3_CONTROL_PADCONF_ETK_D8_OFFSET 0x5bc +#define OMAP3_CONTROL_PADCONF_ETK_D9_OFFSET 0x5be +#define OMAP3_CONTROL_PADCONF_ETK_D10_OFFSET 0x5c0 +#define OMAP3_CONTROL_PADCONF_ETK_D11_OFFSET 0x5c2 +#define OMAP3_CONTROL_PADCONF_ETK_D12_OFFSET 0x5c4 +#define OMAP3_CONTROL_PADCONF_ETK_D13_OFFSET 0x5c6 +#define OMAP3_CONTROL_PADCONF_ETK_D14_OFFSET 0x5c8 +#define OMAP3_CONTROL_PADCONF_ETK_D15_OFFSET 0x5ca +#define OMAP3_CONTROL_PADCONF_I2C4_SCL_OFFSET 0x9d0 +#define OMAP3_CONTROL_PADCONF_I2C4_SDA_OFFSET 0x9d2 +#define OMAP3_CONTROL_PADCONF_SYS_32K_OFFSET 0x9d4 +#define OMAP3_CONTROL_PADCONF_SYS_CLKREQ_OFFSET 0x9d6 +#define OMAP3_CONTROL_PADCONF_SYS_NRESWARM_OFFSET 0x9d8 +#define OMAP3_CONTROL_PADCONF_SYS_BOOT0_OFFSET 0x9da +#define OMAP3_CONTROL_PADCONF_SYS_BOOT1_OFFSET 0x9dc +#define OMAP3_CONTROL_PADCONF_SYS_BOOT2_OFFSET 0x9de +#define OMAP3_CONTROL_PADCONF_SYS_BOOT3_OFFSET 0x9e0 +#define OMAP3_CONTROL_PADCONF_SYS_BOOT4_OFFSET 0x9e2 +#define OMAP3_CONTROL_PADCONF_SYS_BOOT5_OFFSET 0x9e4 +#define OMAP3_CONTROL_PADCONF_SYS_BOOT6_OFFSET 0x9e6 +#define OMAP3_CONTROL_PADCONF_SYS_OFF_MODE_OFFSET 0x9e8 +#define OMAP3_CONTROL_PADCONF_SYS_CLKOUT1_OFFSET 0x9ea +#define OMAP3_CONTROL_PADCONF_JTAG_NTRST_OFFSET 0x9ec +#define OMAP3_CONTROL_PADCONF_JTAG_TCK_OFFSET 0x9ee +#define OMAP3_CONTROL_PADCONF_JTAG_TMS_TMSC_OFFSET 0x9f0 +#define OMAP3_CONTROL_PADCONF_JTAG_TDI_OFFSET 0x9f2 +#define OMAP3_CONTROL_PADCONF_JTAG_EMU0_OFFSET 0x9f4 +#define OMAP3_CONTROL_PADCONF_JTAG_EMU1_OFFSET 0x9f6 +#define OMAP3_CONTROL_PADCONF_SAD2D_SWAKEUP_OFFSET 0xa1c +#define OMAP3_CONTROL_PADCONF_JTAG_RTCK_OFFSET 0xa1e +#define OMAP3_CONTROL_PADCONF_JTAG_TDO_OFFSET 0xa20 + +#define OMAP3_CONTROL_PADCONF_MUX_SIZE \ + (OMAP3_CONTROL_PADCONF_JTAG_TDO_OFFSET + 0x2) -- cgit v0.10.2 From ca5742bdb58ebb74499731855dccf8f8a858b2e4 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 11 Dec 2009 16:16:32 -0800 Subject: omap: mux: Add new style init functions to omap3 board-*.c files Add new style mux init functions to omap3 board-*.c files So far Beagle has been confirmed to be a CBB package, and CM-T35 a CUS package. Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 7da18f0..87893d2 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -61,14 +61,17 @@ config MACH_OMAP_2430SDP config MACH_OMAP3_BEAGLE bool "OMAP3 BEAGLE board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBB config MACH_OMAP_LDP bool "OMAP3 LDP board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBB config MACH_OVERO bool "Gumstix Overo board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBB config MACH_OMAP3EVM bool "OMAP 3530 EVM board" @@ -77,14 +80,17 @@ config MACH_OMAP3EVM config MACH_OMAP3517EVM bool "OMAP3517/ AM3517 EVM board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBB config MACH_OMAP3_PANDORA bool "OMAP3 Pandora" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBB config MACH_OMAP_3430SDP bool "OMAP 3430 SDP board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBB config MACH_NOKIA_N800 bool @@ -105,10 +111,12 @@ config MACH_NOKIA_N8X0 config MACH_NOKIA_RX51 bool "Nokia RX-51 board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBB config MACH_OMAP_ZOOM2 bool "OMAP3 Zoom2 board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBB config MACH_OMAP_ZOOM3 bool "OMAP3630 Zoom3 board" @@ -117,10 +125,12 @@ config MACH_OMAP_ZOOM3 config MACH_CM_T35 bool "CompuLab CM-T35 module" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CUS config MACH_IGEP0020 bool "IGEP0020" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBB config MACH_OMAP_3630SDP bool "OMAP3630 SDP board" diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 5bda9fd..e5d9118 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -42,6 +42,7 @@ #include #include +#include "mux.h" #include "sdram-qimonda-hyb18m512160af-6.h" #include "mmc-twl4030.h" @@ -640,8 +641,17 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .reset_gpio_port[2] = -EINVAL }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap_3430sdp_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3430_i2c_init(); platform_add_devices(sdp3430_devices, ARRAY_SIZE(sdp3430_devices)); if (omap_rev() > OMAP3430_REV_ES1_0) diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 415a13d..b4e6eca 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -30,6 +30,8 @@ #include #include +#include "mux.h" + /* * Board initialization */ @@ -60,8 +62,17 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = { .reset_gpio_port[2] = -EINVAL }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init am3517_evm_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); platform_add_devices(am3517_evm_devices, ARRAY_SIZE(am3517_evm_devices)); diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 22c4529..84321f6 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -45,6 +45,7 @@ #include +#include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" @@ -482,8 +483,17 @@ static void __init cm_t35_map_io(void) omap2_map_common_io(); } +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init cm_t35_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); omap_serial_init(); cm_t35_init_i2c(); cm_t35_init_nand(); diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index fa62e80..7e3217a 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -30,6 +30,7 @@ #include #include +#include "mux.h" #include "mmc-twl4030.h" #define IGEP2_SMSC911X_CS 5 @@ -203,8 +204,17 @@ static int __init igep2_i2c_init(void) return 0; } +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init igep2_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); igep2_i2c_init(); omap_serial_init(); usb_musb_init(); diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index c062238..3743173 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -43,6 +43,7 @@ #include #include +#include "mux.h" #include "mmc-twl4030.h" #define LDP_SMSC911X_CS 1 @@ -374,8 +375,17 @@ static struct platform_device *ldp_devices[] __initdata = { &ldp_gpio_keys_device, }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap_ldp_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_i2c_init(); platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices)); ts_gpio = 54; diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 41480bd..e669dbb 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -45,6 +45,7 @@ #include #include +#include "mux.h" #include "mmc-twl4030.h" #define GPMC_CS0_BASE 0x60 @@ -422,8 +423,17 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .reset_gpio_port[2] = -EINVAL }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap3_beagle_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3_beagle_i2c_init(); platform_add_devices(omap3_beagle_devices, ARRAY_SIZE(omap3_beagle_devices)); diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 5efc2e9..ad174ae 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -43,6 +43,7 @@ #include #include +#include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" @@ -422,9 +423,18 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .reset_gpio_port[2] = -EINVAL }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap3_evm_init(void) { omap3_evm_get_revision(); + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3_evm_i2c_init(); diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 2db5ba5..9f59c03 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -42,6 +42,7 @@ #include #include +#include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" @@ -409,8 +410,17 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .reset_gpio_port[2] = -EINVAL }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap3pandora_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3pandora_i2c_init(); platform_add_devices(omap3pandora_devices, ARRAY_SIZE(omap3pandora_devices)); diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 52dfd51..40f3c85 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -47,6 +47,7 @@ #include #include +#include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" @@ -405,9 +406,17 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .reset_gpio_port[2] = -EINVAL }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif static void __init overo_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); overo_i2c_init(); platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices)); omap_serial_init(); diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 1bb1de2..c0c99ad 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -30,6 +30,8 @@ #include #include +#include "mux.h" + struct omap_sdrc_params *rx51_get_sdram_timings(void); static struct omap_lcd_config rx51_lcd_config = { @@ -69,8 +71,17 @@ static void __init rx51_init_irq(void) extern void __init rx51_peripherals_init(void); +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init rx51_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_serial_init(); usb_musb_init(); rx51_peripherals_init(); diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c index d94d047..bb87cf7 100644 --- a/arch/arm/mach-omap2/board-zoom2.c +++ b/arch/arm/mach-omap2/board-zoom2.c @@ -23,6 +23,7 @@ #include +#include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" static void __init omap_zoom2_init_irq(void) @@ -68,8 +69,17 @@ static struct twl4030_platform_data zoom2_twldata = { #endif +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap_zoom2_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); zoom_peripherals_init(); zoom_debugboard_init(); } -- cgit v0.10.2 From 4b715efccf9547c0d7fe864277526fee3d9b6bba Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 11 Dec 2009 16:16:32 -0800 Subject: omap: mux: Add debugfs support for new mux code Add debugfs support for new mux code Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index b082b50..d968433 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -28,6 +28,10 @@ #include #include #include +#include +#include +#include +#include #include @@ -44,6 +48,7 @@ struct omap_mux_entry { struct list_head node; }; +static unsigned long mux_phys; static void __iomem *mux_base; static inline u16 omap_mux_read(u16 reg) @@ -807,6 +812,225 @@ int __init omap_mux_init_signal(char *muxname, int val) return -ENODEV; } +#ifdef CONFIG_DEBUG_FS + +#define OMAP_MUX_MAX_NR_FLAGS 10 +#define OMAP_MUX_TEST_FLAG(val, mask) \ + if (((val) & (mask)) == (mask)) { \ + i++; \ + flags[i] = #mask; \ + } + +/* REVISIT: Add checking for non-optimal mux settings */ +static inline void omap_mux_decode(struct seq_file *s, u16 val) +{ + char *flags[OMAP_MUX_MAX_NR_FLAGS]; + char mode[14]; + int i = -1; + + sprintf(mode, "OMAP_MUX_MODE%d", val & 0x7); + i++; + flags[i] = mode; + + OMAP_MUX_TEST_FLAG(val, OMAP_PIN_OFF_WAKEUPENABLE); + if (val & OMAP_OFF_EN) { + if (!(val & OMAP_OFFOUT_EN)) { + if (!(val & OMAP_OFF_PULL_UP)) { + OMAP_MUX_TEST_FLAG(val, + OMAP_PIN_OFF_INPUT_PULLDOWN); + } else { + OMAP_MUX_TEST_FLAG(val, + OMAP_PIN_OFF_INPUT_PULLUP); + } + } else { + if (!(val & OMAP_OFFOUT_VAL)) { + OMAP_MUX_TEST_FLAG(val, + OMAP_PIN_OFF_OUTPUT_LOW); + } else { + OMAP_MUX_TEST_FLAG(val, + OMAP_PIN_OFF_OUTPUT_HIGH); + } + } + } + + if (val & OMAP_INPUT_EN) { + if (val & OMAP_PULL_ENA) { + if (!(val & OMAP_PULL_UP)) { + OMAP_MUX_TEST_FLAG(val, + OMAP_PIN_INPUT_PULLDOWN); + } else { + OMAP_MUX_TEST_FLAG(val, OMAP_PIN_INPUT_PULLUP); + } + } else { + OMAP_MUX_TEST_FLAG(val, OMAP_PIN_INPUT); + } + } else { + i++; + flags[i] = "OMAP_PIN_OUTPUT"; + } + + do { + seq_printf(s, "%s", flags[i]); + if (i > 0) + seq_printf(s, " | "); + } while (i-- > 0); +} + +#define OMAP_MUX_DEFNAME_LEN 16 + +static int omap_mux_dbg_board_show(struct seq_file *s, void *unused) +{ + struct omap_mux_entry *e; + + list_for_each_entry(e, &muxmodes, node) { + struct omap_mux *m = &e->mux; + char m0_def[OMAP_MUX_DEFNAME_LEN]; + char *m0_name = m->muxnames[0]; + u16 val; + int i, mode; + + if (!m0_name) + continue; + + for (i = 0; i < OMAP_MUX_DEFNAME_LEN; i++) { + if (m0_name[i] == '\0') { + m0_def[i] = m0_name[i]; + break; + } + m0_def[i] = toupper(m0_name[i]); + } + val = omap_mux_read(m->reg_offset); + mode = val & OMAP_MUX_MODE7; + + seq_printf(s, "OMAP%i_MUX(%s, ", + cpu_is_omap34xx() ? 3 : 0, m0_def); + omap_mux_decode(s, val); + seq_printf(s, "),\n"); + } + + return 0; +} + +static int omap_mux_dbg_board_open(struct inode *inode, struct file *file) +{ + return single_open(file, omap_mux_dbg_board_show, &inode->i_private); +} + +static const struct file_operations omap_mux_dbg_board_fops = { + .open = omap_mux_dbg_board_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int omap_mux_dbg_signal_show(struct seq_file *s, void *unused) +{ + struct omap_mux *m = s->private; + const char *none = "NA"; + u16 val; + int mode; + + val = omap_mux_read(m->reg_offset); + mode = val & OMAP_MUX_MODE7; + + seq_printf(s, "name: %s.%s (0x%08lx/0x%03x = 0x%04x), b %s, t %s\n", + m->muxnames[0], m->muxnames[mode], + mux_phys + m->reg_offset, m->reg_offset, val, + m->balls[0] ? m->balls[0] : none, + m->balls[1] ? m->balls[1] : none); + seq_printf(s, "mode: "); + omap_mux_decode(s, val); + seq_printf(s, "\n"); + seq_printf(s, "signals: %s | %s | %s | %s | %s | %s | %s | %s\n", + m->muxnames[0] ? m->muxnames[0] : none, + m->muxnames[1] ? m->muxnames[1] : none, + m->muxnames[2] ? m->muxnames[2] : none, + m->muxnames[3] ? m->muxnames[3] : none, + m->muxnames[4] ? m->muxnames[4] : none, + m->muxnames[5] ? m->muxnames[5] : none, + m->muxnames[6] ? m->muxnames[6] : none, + m->muxnames[7] ? m->muxnames[7] : none); + + return 0; +} + +#define OMAP_MUX_MAX_ARG_CHAR 7 + +static ssize_t omap_mux_dbg_signal_write(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + char buf[OMAP_MUX_MAX_ARG_CHAR]; + struct seq_file *seqf; + struct omap_mux *m; + unsigned long val; + int buf_size, ret; + + if (count > OMAP_MUX_MAX_ARG_CHAR) + return -EINVAL; + + memset(buf, 0, sizeof(buf)); + buf_size = min(count, sizeof(buf) - 1); + + if (copy_from_user(buf, user_buf, buf_size)) + return -EFAULT; + + ret = strict_strtoul(buf, 0x10, &val); + if (ret < 0) + return ret; + + if (val > 0xffff) + return -EINVAL; + + seqf = file->private_data; + m = seqf->private; + + omap_mux_write((u16)val, m->reg_offset); + *ppos += count; + + return count; +} + +static int omap_mux_dbg_signal_open(struct inode *inode, struct file *file) +{ + return single_open(file, omap_mux_dbg_signal_show, inode->i_private); +} + +static const struct file_operations omap_mux_dbg_signal_fops = { + .open = omap_mux_dbg_signal_open, + .read = seq_read, + .write = omap_mux_dbg_signal_write, + .llseek = seq_lseek, + .release = single_release, +}; + +static struct dentry *mux_dbg_dir; + +static void __init omap_mux_dbg_init(void) +{ + struct omap_mux_entry *e; + + mux_dbg_dir = debugfs_create_dir("omap_mux", NULL); + if (!mux_dbg_dir) + return; + + (void)debugfs_create_file("board", S_IRUGO, mux_dbg_dir, + NULL, &omap_mux_dbg_board_fops); + + list_for_each_entry(e, &muxmodes, node) { + struct omap_mux *m = &e->mux; + + (void)debugfs_create_file(m->muxnames[0], S_IWUGO, mux_dbg_dir, + m, &omap_mux_dbg_signal_fops); + } +} + +#else +static inline void omap_mux_dbg_init(void) +{ +} +#endif /* CONFIG_DEBUG_FS */ + static void __init omap_mux_free_names(struct omap_mux *m) { int i; @@ -843,6 +1067,8 @@ static int __init omap_mux_late_init(void) } + omap_mux_dbg_init(); + return 0; } late_initcall(omap_mux_late_init); @@ -1107,6 +1333,7 @@ int __init omap_mux_init(u32 mux_pbase, u32 mux_size, if (mux_base) return -EBUSY; + mux_phys = mux_pbase; mux_base = ioremap(mux_pbase, mux_size); if (!mux_base) { printk(KERN_ERR "mux: Could not ioremap\n"); -- cgit v0.10.2 From b63128e81214cc2db2995d690438055c26d213a5 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 11 Dec 2009 16:16:32 -0800 Subject: omap: Split i2c platform init for mach-omap1 and mach-omap2 Otherwise we cannot limit new mux code to mach-omap2. The same signal names should eventually work for other omaps under mach-omap2. Note that these pins don't need to be OMAP_PIN_INPUT_PULLUP, just OMAP_PIN_INPUT is enough. Cc: Jarkko Nikula Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index ceced8f..191e0cf 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -18,6 +18,9 @@ obj-$(CONFIG_PM) += pm.o sleep.o obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o mailbox_mach-objs := mailbox.o +i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o +obj-y += $(i2c-omap-m) $(i2c-omap-y) + led-y := leds.o # Specific board support diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c new file mode 100644 index 0000000..bc9d12b --- /dev/null +++ b/arch/arm/mach-omap1/i2c.c @@ -0,0 +1,33 @@ +/* + * Helper module for board specific I2C bus registration + * + * Copyright (C) 2009 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include +#include + +int __init omap_register_i2c_bus(int bus_id, u32 clkrate, + struct i2c_board_info const *info, + unsigned len) +{ + omap_cfg_reg(I2C_SDA); + omap_cfg_reg(I2C_SCL); + + return omap_plat_register_i2c_bus(bus_id, clkrate, info, len); +} diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 6e348e5..e30e335 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -64,6 +64,9 @@ iommu-$(CONFIG_ARCH_OMAP3) += omap3-iommu.o obj-$(CONFIG_OMAP_IOMMU) += $(iommu-y) +i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o +obj-y += $(i2c-omap-m) $(i2c-omap-y) + # Specific board support obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c new file mode 100644 index 0000000..789ca8c --- /dev/null +++ b/arch/arm/mach-omap2/i2c.c @@ -0,0 +1,56 @@ +/* + * Helper module for board specific I2C bus registration + * + * Copyright (C) 2009 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include +#include +#include + +#include "mux.h" + +int __init omap_register_i2c_bus(int bus_id, u32 clkrate, + struct i2c_board_info const *info, + unsigned len) +{ + if (cpu_is_omap24xx()) { + const int omap24xx_pins[][2] = { + { M19_24XX_I2C1_SCL, L15_24XX_I2C1_SDA }, + { J15_24XX_I2C2_SCL, H19_24XX_I2C2_SDA }, + }; + int scl, sda; + + scl = omap24xx_pins[bus_id - 1][0]; + sda = omap24xx_pins[bus_id - 1][1]; + omap_cfg_reg(sda); + omap_cfg_reg(scl); + } + + /* First I2C bus is not muxable */ + if (cpu_is_omap34xx() && bus_id > 1) { + char mux_name[sizeof("i2c2_scl.i2c2_scl")]; + + sprintf(mux_name, "i2c%i_scl.i2c%i_scl", bus_id, bus_id); + omap_mux_init_signal(mux_name, OMAP_PIN_INPUT); + sprintf(mux_name, "i2c%i_sda.i2c%i_sda", bus_id, bus_id); + omap_mux_init_signal(mux_name, OMAP_PIN_INPUT); + } + + return omap_plat_register_i2c_bus(bus_id, clkrate, info, len); +} diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c index c08362d..33fff4e 100644 --- a/arch/arm/plat-omap/i2c.c +++ b/arch/arm/plat-omap/i2c.c @@ -80,47 +80,8 @@ static struct platform_device omap_i2c_devices[] = { #endif }; -#if defined(CONFIG_ARCH_OMAP24XX) -static const int omap24xx_pins[][2] = { - { M19_24XX_I2C1_SCL, L15_24XX_I2C1_SDA }, - { J15_24XX_I2C2_SCL, H19_24XX_I2C2_SDA }, -}; -#else -static const int omap24xx_pins[][2] = {}; -#endif -#if defined(CONFIG_ARCH_OMAP34XX) -static const int omap34xx_pins[][2] = { - { K21_34XX_I2C1_SCL, J21_34XX_I2C1_SDA}, - { AF15_34XX_I2C2_SCL, AE15_34XX_I2C2_SDA}, - { AF14_34XX_I2C3_SCL, AG14_34XX_I2C3_SDA}, -}; -#else -static const int omap34xx_pins[][2] = {}; -#endif - #define OMAP_I2C_CMDLINE_SETUP (BIT(31)) -static void __init omap_i2c_mux_pins(int bus) -{ - int scl, sda; - - if (cpu_class_is_omap1()) { - scl = I2C_SCL; - sda = I2C_SDA; - } else if (cpu_is_omap24xx()) { - scl = omap24xx_pins[bus][0]; - sda = omap24xx_pins[bus][1]; - } else if (cpu_is_omap34xx()) { - scl = omap34xx_pins[bus][0]; - sda = omap34xx_pins[bus][1]; - } else { - return; - } - - omap_cfg_reg(sda); - omap_cfg_reg(scl); -} - static int __init omap_i2c_nr_ports(void) { int ports = 0; @@ -156,7 +117,6 @@ static int __init omap_i2c_add_bus(int bus_id) res[1].start = irq; } - omap_i2c_mux_pins(bus_id - 1); return platform_device_register(pdev); } @@ -209,7 +169,7 @@ out: subsys_initcall(omap_register_i2c_bus_cmdline); /** - * omap_register_i2c_bus - register I2C bus with device descriptors + * omap_plat_register_i2c_bus - register I2C bus with device descriptors * @bus_id: bus id counting from number 1 * @clkrate: clock rate of the bus in kHz * @info: pointer into I2C device descriptor table or NULL @@ -217,7 +177,7 @@ subsys_initcall(omap_register_i2c_bus_cmdline); * * Returns 0 on success or an error code. */ -int __init omap_register_i2c_bus(int bus_id, u32 clkrate, +int __init omap_plat_register_i2c_bus(int bus_id, u32 clkrate, struct i2c_board_info const *info, unsigned len) { diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h index 2f816fe..32c2227 100644 --- a/arch/arm/plat-omap/include/plat/common.h +++ b/arch/arm/plat-omap/include/plat/common.h @@ -27,7 +27,7 @@ #ifndef __ARCH_ARM_MACH_OMAP_COMMON_H #define __ARCH_ARM_MACH_OMAP_COMMON_H -#include +#include struct sys_timer; @@ -36,18 +36,6 @@ extern void __iomem *gic_cpu_base_addr; extern void omap_map_common_io(void); extern struct sys_timer omap_timer; -#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) -extern int omap_register_i2c_bus(int bus_id, u32 clkrate, - struct i2c_board_info const *info, - unsigned len); -#else -static inline int omap_register_i2c_bus(int bus_id, u32 clkrate, - struct i2c_board_info const *info, - unsigned len) -{ - return 0; -} -#endif /* IO bases for various OMAP processors */ struct omap_globals { diff --git a/arch/arm/plat-omap/include/plat/i2c.h b/arch/arm/plat-omap/include/plat/i2c.h new file mode 100644 index 0000000..585d9ca --- /dev/null +++ b/arch/arm/plat-omap/include/plat/i2c.h @@ -0,0 +1,39 @@ +/* + * Helper module for board specific I2C bus registration + * + * Copyright (C) 2009 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include + +#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) +extern int omap_register_i2c_bus(int bus_id, u32 clkrate, + struct i2c_board_info const *info, + unsigned len); +#else +static inline int omap_register_i2c_bus(int bus_id, u32 clkrate, + struct i2c_board_info const *info, + unsigned len) +{ + return 0; +} +#endif + +int omap_plat_register_i2c_bus(int bus_id, u32 clkrate, + struct i2c_board_info const *info, + unsigned len); -- cgit v0.10.2 From 4896e3940a063fb03195d05806d28970dc3f102b Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 11 Dec 2009 16:16:32 -0800 Subject: omap: mux: Replace omap_cfg_reg() with new style signal or gpio functions Replace omap_cfg_reg() with new style signal or gpio functions Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index e5d9118..ded3e87 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -626,7 +626,9 @@ static inline void board_smc91x_init(void) static void enable_board_wakeup_source(void) { - omap_cfg_reg(AF26_34XX_SYS_NIRQ); /* T2 interrupt line (keypad) */ + /* T2 interrupt line (keypad) */ + omap_mux_init_signal("sys_nirq", + OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP); } static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index 348b70b..e6cbc27 100755 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -23,6 +23,7 @@ #include +#include "mux.h" #include "sdram-hynix-h8mbx00u0mer-0em.h" #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) @@ -48,7 +49,9 @@ static inline void board_smc91x_init(void) static void enable_board_wakeup_source(void) { - omap_cfg_reg(AF26_34XX_SYS_NIRQ); /* T2 interrupt line (keypad) */ + /* T2 interrupt line (keypad) */ + omap_mux_init_signal("sys_nirq", + OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP); } static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 84321f6..10a5955 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -503,7 +503,8 @@ static void __init cm_t35_init(void) usb_musb_init(); - omap_cfg_reg(AF26_34XX_SYS_NIRQ); + omap_mux_init_signal("sys_nirq", + OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP); } MACHINE_START(CM_T35, "Compulab CM-T35") diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index e669dbb..9e606b1 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -141,10 +141,10 @@ static int beagle_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { if (system_rev >= 0x20 && system_rev <= 0x34301000) { - omap_cfg_reg(AG9_34XX_GPIO23); + omap_mux_init_gpio(23, OMAP_PIN_INPUT); mmc[0].gpio_wp = 23; } else { - omap_cfg_reg(AH8_34XX_GPIO29); + omap_mux_init_gpio(29, OMAP_PIN_INPUT); } /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; @@ -439,7 +439,7 @@ static void __init omap3_beagle_init(void) ARRAY_SIZE(omap3_beagle_devices)); omap_serial_init(); - omap_cfg_reg(J25_34XX_GPIO170); + omap_mux_init_gpio(170, OMAP_PIN_INPUT); gpio_request(170, "DVI_nPD"); /* REVISIT leave DVI powered down until it's needed ... */ gpio_direction_output(170, true); @@ -449,8 +449,8 @@ static void __init omap3_beagle_init(void) omap3beagle_flash_init(); /* Ensure SDRC pins are mux'd for self-refresh */ - omap_cfg_reg(H16_34XX_SDRC_CKE0); - omap_cfg_reg(H17_34XX_SDRC_CKE1); + omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); + omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); } static void __init omap3_beagle_map_io(void) diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index ad174ae..0457f61 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -224,7 +224,7 @@ static int omap3evm_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { /* gpio + 0 is "mmc0_cd" (input/IRQ) */ - omap_cfg_reg(L8_34XX_GPIO63); + omap_mux_init_gpio(63, OMAP_PIN_INPUT); mmc[0].gpio_cd = gpio + 0; twl4030_mmc_init(mmc); @@ -450,24 +450,24 @@ static void __init omap3_evm_init(void) #endif if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) { /* enable EHCI VBUS using GPIO22 */ - omap_cfg_reg(AF9_34XX_GPIO22); + omap_mux_init_gpio(22, OMAP_PIN_INPUT_PULLUP); gpio_request(OMAP3_EVM_EHCI_VBUS, "enable EHCI VBUS"); gpio_direction_output(OMAP3_EVM_EHCI_VBUS, 0); gpio_set_value(OMAP3_EVM_EHCI_VBUS, 1); /* Select EHCI port on main board */ - omap_cfg_reg(U3_34XX_GPIO61); + omap_mux_init_gpio(61, OMAP_PIN_INPUT_PULLUP); gpio_request(OMAP3_EVM_EHCI_SELECT, "select EHCI port"); gpio_direction_output(OMAP3_EVM_EHCI_SELECT, 0); gpio_set_value(OMAP3_EVM_EHCI_SELECT, 0); /* setup EHCI phy reset config */ - omap_cfg_reg(AH14_34XX_GPIO21); + omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP); ehci_pdata.reset_gpio_port[1] = 21; } else { /* setup EHCI phy reset on MDC */ - omap_cfg_reg(AF4_34XX_GPIO135_OUT); + omap_mux_init_gpio(135, OMAP_PIN_OUTPUT); ehci_pdata.reset_gpio_port[1] = 135; } usb_musb_init(); diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 9f59c03..bca5ad9 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -433,8 +433,8 @@ static void __init omap3pandora_init(void) usb_musb_init(); /* Ensure SDRC pins are mux'd for self-refresh */ - omap_cfg_reg(H16_34XX_SDRC_CKE0); - omap_cfg_reg(H17_34XX_SDRC_CKE1); + omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); + omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); } static void __init omap3pandora_map_io(void) diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 40f3c85..1ebde4c3 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -427,8 +427,8 @@ static void __init overo_init(void) overo_init_smsc911x(); /* Ensure SDRC pins are mux'd for self-refresh */ - omap_cfg_reg(H16_34XX_SDRC_CKE0); - omap_cfg_reg(H17_34XX_SDRC_CKE1); + omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); + omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); if ((gpio_request(OVERO_GPIO_W2W_NRESET, "OVERO_GPIO_W2W_NRESET") == 0) && diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 15ce651..8144420 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -33,6 +33,7 @@ #include #include +#include "mux.h" #include "mmc-twl4030.h" #define SYSTEM_REV_B_USES_VAUX3 0x1699 @@ -630,9 +631,9 @@ static struct omap_smc91x_platform_data board_smc91x_data = { static void __init board_smc91x_init(void) { - omap_cfg_reg(U8_34XX_GPIO54_DOWN); - omap_cfg_reg(G25_34XX_GPIO86_OUT); - omap_cfg_reg(H19_34XX_GPIO164_OUT); + omap_mux_init_gpio(54, OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_gpio(86, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(164, OMAP_PIN_OUTPUT); gpmc_smc91x_init(&board_smc91x_data); } diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index c0c99ad..fd71c00 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -87,8 +87,8 @@ static void __init rx51_init(void) rx51_peripherals_init(); /* Ensure SDRC pins are mux'd for self-refresh */ - omap_cfg_reg(H16_34XX_SDRC_CKE0); - omap_cfg_reg(H17_34XX_SDRC_CKE1); + omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); + omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); } static void __init rx51_map_io(void) diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 733d3dc..18ad931 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -27,6 +27,8 @@ #include #include +#include "mux.h" + #if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE) static struct resource cam_resources[] = { @@ -595,27 +597,40 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller, if (cpu_is_omap34xx()) { if (controller_nr == 0) { - omap_cfg_reg(N28_3430_MMC1_CLK); - omap_cfg_reg(M27_3430_MMC1_CMD); - omap_cfg_reg(N27_3430_MMC1_DAT0); + omap_mux_init_signal("sdmmc1_clk", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_cmd", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_dat0", + OMAP_PIN_INPUT_PULLUP); if (mmc_controller->slots[0].wires == 4 || mmc_controller->slots[0].wires == 8) { - omap_cfg_reg(N26_3430_MMC1_DAT1); - omap_cfg_reg(N25_3430_MMC1_DAT2); - omap_cfg_reg(P28_3430_MMC1_DAT3); + omap_mux_init_signal("sdmmc1_dat1", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_dat2", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_dat3", + OMAP_PIN_INPUT_PULLUP); } if (mmc_controller->slots[0].wires == 8) { - omap_cfg_reg(P27_3430_MMC1_DAT4); - omap_cfg_reg(P26_3430_MMC1_DAT5); - omap_cfg_reg(R27_3430_MMC1_DAT6); - omap_cfg_reg(R25_3430_MMC1_DAT7); + omap_mux_init_signal("sdmmc1_dat4", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_dat5", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_dat6", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_dat7", + OMAP_PIN_INPUT_PULLUP); } } if (controller_nr == 1) { /* MMC2 */ - omap_cfg_reg(AE2_3430_MMC2_CLK); - omap_cfg_reg(AG5_3430_MMC2_CMD); - omap_cfg_reg(AH5_3430_MMC2_DAT0); + omap_mux_init_signal("sdmmc2_clk", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_cmd", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_dat0", + OMAP_PIN_INPUT_PULLUP); /* * For 8 wire configurations, Lines DAT4, 5, 6 and 7 need to be muxed @@ -623,15 +638,22 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller, */ if (mmc_controller->slots[0].wires == 4 || mmc_controller->slots[0].wires == 8) { - omap_cfg_reg(AH4_3430_MMC2_DAT1); - omap_cfg_reg(AG4_3430_MMC2_DAT2); - omap_cfg_reg(AF4_3430_MMC2_DAT3); + omap_mux_init_signal("sdmmc2_dat1", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_dat2", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_dat3", + OMAP_PIN_INPUT_PULLUP); } if (mmc_controller->slots[0].wires == 8) { - omap_cfg_reg(AE4_3430_MMC2_DAT4); - omap_cfg_reg(AH3_3430_MMC2_DAT5); - omap_cfg_reg(AF3_3430_MMC2_DAT6); - omap_cfg_reg(AE3_3430_MMC2_DAT7); + omap_mux_init_signal("sdmmc2_dat4.sdmmc2_dat4", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_dat5.sdmmc2_dat5", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_dat6.sdmmc2_dat6", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_dat7.sdmmc2_dat7", + OMAP_PIN_INPUT_PULLUP); } } diff --git a/arch/arm/mach-omap2/usb-ehci.c b/arch/arm/mach-omap2/usb-ehci.c index e448abd..f1df873 100644 --- a/arch/arm/mach-omap2/usb-ehci.c +++ b/arch/arm/mach-omap2/usb-ehci.c @@ -27,6 +27,8 @@ #include #include +#include "mux.h" + #if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE) static struct resource ehci_resources[] = { @@ -72,32 +74,44 @@ static void setup_ehci_io_mux(enum ehci_hcd_omap_mode *port_mode) { switch (port_mode[0]) { case EHCI_HCD_OMAP_MODE_PHY: - omap_cfg_reg(Y9_3430_USB1HS_PHY_STP); - omap_cfg_reg(Y8_3430_USB1HS_PHY_CLK); - omap_cfg_reg(AA14_3430_USB1HS_PHY_DIR); - omap_cfg_reg(AA11_3430_USB1HS_PHY_NXT); - omap_cfg_reg(W13_3430_USB1HS_PHY_DATA0); - omap_cfg_reg(W12_3430_USB1HS_PHY_DATA1); - omap_cfg_reg(W11_3430_USB1HS_PHY_DATA2); - omap_cfg_reg(Y11_3430_USB1HS_PHY_DATA3); - omap_cfg_reg(W9_3430_USB1HS_PHY_DATA4); - omap_cfg_reg(Y12_3430_USB1HS_PHY_DATA5); - omap_cfg_reg(W8_3430_USB1HS_PHY_DATA6); - omap_cfg_reg(Y13_3430_USB1HS_PHY_DATA7); + omap_mux_init_signal("hsusb1_stp", OMAP_PIN_OUTPUT); + omap_mux_init_signal("hsusb1_clk", OMAP_PIN_OUTPUT); + omap_mux_init_signal("hsusb1_dir", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_nxt", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_data0", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_data1", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_data2", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_data3", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_data4", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_data5", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_data6", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_data7", OMAP_PIN_INPUT_PULLDOWN); break; case EHCI_HCD_OMAP_MODE_TLL: - omap_cfg_reg(Y9_3430_USB1HS_TLL_STP); - omap_cfg_reg(Y8_3430_USB1HS_TLL_CLK); - omap_cfg_reg(AA14_3430_USB1HS_TLL_DIR); - omap_cfg_reg(AA11_3430_USB1HS_TLL_NXT); - omap_cfg_reg(W13_3430_USB1HS_TLL_DATA0); - omap_cfg_reg(W12_3430_USB1HS_TLL_DATA1); - omap_cfg_reg(W11_3430_USB1HS_TLL_DATA2); - omap_cfg_reg(Y11_3430_USB1HS_TLL_DATA3); - omap_cfg_reg(W9_3430_USB1HS_TLL_DATA4); - omap_cfg_reg(Y12_3430_USB1HS_TLL_DATA5); - omap_cfg_reg(W8_3430_USB1HS_TLL_DATA6); - omap_cfg_reg(Y13_3430_USB1HS_TLL_DATA7); + omap_mux_init_signal("hsusb1_tll_stp", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("hsusb1_tll_clk", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_dir", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_nxt", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_data0", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_data1", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_data2", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_data3", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_data4", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_data5", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_data6", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_data7", + OMAP_PIN_INPUT_PULLDOWN); break; case EHCI_HCD_OMAP_MODE_UNKNOWN: /* FALLTHROUGH */ @@ -107,32 +121,52 @@ static void setup_ehci_io_mux(enum ehci_hcd_omap_mode *port_mode) switch (port_mode[1]) { case EHCI_HCD_OMAP_MODE_PHY: - omap_cfg_reg(AA10_3430_USB2HS_PHY_STP); - omap_cfg_reg(AA8_3430_USB2HS_PHY_CLK); - omap_cfg_reg(AA9_3430_USB2HS_PHY_DIR); - omap_cfg_reg(AB11_3430_USB2HS_PHY_NXT); - omap_cfg_reg(AB10_3430_USB2HS_PHY_DATA0); - omap_cfg_reg(AB9_3430_USB2HS_PHY_DATA1); - omap_cfg_reg(W3_3430_USB2HS_PHY_DATA2); - omap_cfg_reg(T4_3430_USB2HS_PHY_DATA3); - omap_cfg_reg(T3_3430_USB2HS_PHY_DATA4); - omap_cfg_reg(R3_3430_USB2HS_PHY_DATA5); - omap_cfg_reg(R4_3430_USB2HS_PHY_DATA6); - omap_cfg_reg(T2_3430_USB2HS_PHY_DATA7); + omap_mux_init_signal("hsusb2_stp", OMAP_PIN_OUTPUT); + omap_mux_init_signal("hsusb2_clk", OMAP_PIN_OUTPUT); + omap_mux_init_signal("hsusb2_dir", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_nxt", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_data0", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_data1", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_data2", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_data3", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_data4", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_data5", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_data6", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_data7", + OMAP_PIN_INPUT_PULLDOWN); break; case EHCI_HCD_OMAP_MODE_TLL: - omap_cfg_reg(AA10_3430_USB2HS_TLL_STP); - omap_cfg_reg(AA8_3430_USB2HS_TLL_CLK); - omap_cfg_reg(AA9_3430_USB2HS_TLL_DIR); - omap_cfg_reg(AB11_3430_USB2HS_TLL_NXT); - omap_cfg_reg(AB10_3430_USB2HS_TLL_DATA0); - omap_cfg_reg(AB9_3430_USB2HS_TLL_DATA1); - omap_cfg_reg(W3_3430_USB2HS_TLL_DATA2); - omap_cfg_reg(T4_3430_USB2HS_TLL_DATA3); - omap_cfg_reg(T3_3430_USB2HS_TLL_DATA4); - omap_cfg_reg(R3_3430_USB2HS_TLL_DATA5); - omap_cfg_reg(R4_3430_USB2HS_TLL_DATA6); - omap_cfg_reg(T2_3430_USB2HS_TLL_DATA7); + omap_mux_init_signal("hsusb2_tll_stp", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("hsusb2_tll_clk", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_dir", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_nxt", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_data0", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_data1", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_data2", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_data3", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_data4", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_data5", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_data6", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_data7", + OMAP_PIN_INPUT_PULLDOWN); break; case EHCI_HCD_OMAP_MODE_UNKNOWN: /* FALLTHROUGH */ @@ -145,18 +179,30 @@ static void setup_ehci_io_mux(enum ehci_hcd_omap_mode *port_mode) printk(KERN_WARNING "Port3 can't be used in PHY mode\n"); break; case EHCI_HCD_OMAP_MODE_TLL: - omap_cfg_reg(AB3_3430_USB3HS_TLL_STP); - omap_cfg_reg(AA6_3430_USB3HS_TLL_CLK); - omap_cfg_reg(AA3_3430_USB3HS_TLL_DIR); - omap_cfg_reg(Y3_3430_USB3HS_TLL_NXT); - omap_cfg_reg(AA5_3430_USB3HS_TLL_DATA0); - omap_cfg_reg(Y4_3430_USB3HS_TLL_DATA1); - omap_cfg_reg(Y5_3430_USB3HS_TLL_DATA2); - omap_cfg_reg(W5_3430_USB3HS_TLL_DATA3); - omap_cfg_reg(AB12_3430_USB3HS_TLL_DATA4); - omap_cfg_reg(AB13_3430_USB3HS_TLL_DATA5); - omap_cfg_reg(AA13_3430_USB3HS_TLL_DATA6); - omap_cfg_reg(AA12_3430_USB3HS_TLL_DATA7); + omap_mux_init_signal("hsusb3_tll_stp", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("hsusb3_tll_clk", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_dir", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_nxt", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_data0", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_data1", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_data2", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_data3", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_data4", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_data5", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_data6", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_data7", + OMAP_PIN_INPUT_PULLDOWN); break; case EHCI_HCD_OMAP_MODE_UNKNOWN: /* FALLTHROUGH */ -- cgit v0.10.2 From 15f45e6f27b0ef0719171978acadf073b066fb74 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 11 Dec 2009 16:16:33 -0800 Subject: omap: mux: Remove old mux code for 34xx Remove old mux code for 34xx Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index ded3e87..4cfb7b6 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -31,7 +31,6 @@ #include #include -#include #include #include #include diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 10a5955..507c922 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -38,7 +38,6 @@ #include #include -#include #include #include #include diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 7e3217a..44239e3 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -27,7 +27,6 @@ #include #include #include -#include #include #include "mux.h" diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 9e606b1..6ada802 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -41,7 +41,6 @@ #include #include #include -#include #include #include diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 0457f61..18913e9 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -38,7 +38,6 @@ #include #include -#include #include #include #include diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index bca5ad9..c1cc99c 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -40,7 +40,6 @@ #include #include #include -#include #include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 1ebde4c3..5b78a87 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -44,7 +44,6 @@ #include #include #include -#include #include #include "mux.h" diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index fd71c00..67bb347 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -23,7 +23,6 @@ #include #include -#include #include #include #include diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index ac9ea60..a8749e8 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #include "clock.h" diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index d968433..e071b3f 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -67,13 +67,12 @@ static inline void omap_mux_write(u16 val, u16 reg) __raw_writew(val, mux_base + reg); } -#ifdef CONFIG_OMAP_MUX +#if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_OMAP_MUX) static struct omap_mux_cfg arch_mux_cfg; /* NOTE: See mux.h for the enumeration */ -#ifdef CONFIG_ARCH_OMAP24XX static struct pin_config __initdata_or_module omap24xx_pins[] = { /* * description mux mux pull pull debug @@ -283,333 +282,8 @@ MUX_CFG_24XX("AF19_2430_GPIO_85", 0x0113, 3, 0, 0, 1) #define OMAP24XX_PINS_SZ ARRAY_SIZE(omap24xx_pins) -#else -#define omap24xx_pins NULL -#define OMAP24XX_PINS_SZ 0 -#endif /* CONFIG_ARCH_OMAP24XX */ - -#ifdef CONFIG_ARCH_OMAP34XX -static struct pin_config __initdata_or_module omap34xx_pins[] = { -/* - * Name, reg-offset, - * mux-mode | [active-mode | off-mode] - */ - -/* 34xx I2C */ -MUX_CFG_34XX("K21_34XX_I2C1_SCL", 0x1ba, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("J21_34XX_I2C1_SDA", 0x1bc, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AF15_34XX_I2C2_SCL", 0x1be, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AE15_34XX_I2C2_SDA", 0x1c0, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AF14_34XX_I2C3_SCL", 0x1c2, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AG14_34XX_I2C3_SDA", 0x1c4, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AD26_34XX_I2C4_SCL", 0xa00, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AE26_34XX_I2C4_SDA", 0xa02, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) - -/* PHY - HSUSB: 12-pin ULPI PHY: Port 1*/ -MUX_CFG_34XX("Y8_3430_USB1HS_PHY_CLK", 0x5da, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("Y9_3430_USB1HS_PHY_STP", 0x5d8, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("AA14_3430_USB1HS_PHY_DIR", 0x5ec, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AA11_3430_USB1HS_PHY_NXT", 0x5ee, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W13_3430_USB1HS_PHY_D0", 0x5dc, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W12_3430_USB1HS_PHY_D1", 0x5de, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W11_3430_USB1HS_PHY_D2", 0x5e0, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y11_3430_USB1HS_PHY_D3", 0x5ea, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W9_3430_USB1HS_PHY_D4", 0x5e4, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y12_3430_USB1HS_PHY_D5", 0x5e6, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W8_3430_USB1HS_PHY_D6", 0x5e8, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y13_3430_USB1HS_PHY_D7", 0x5e2, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) - -/* PHY - HSUSB: 12-pin ULPI PHY: Port 2*/ -MUX_CFG_34XX("AA8_3430_USB2HS_PHY_CLK", 0x5f0, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("AA10_3430_USB2HS_PHY_STP", 0x5f2, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("AA9_3430_USB2HS_PHY_DIR", 0x5f4, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB11_3430_USB2HS_PHY_NXT", 0x5f6, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB10_3430_USB2HS_PHY_D0", 0x5f8, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB9_3430_USB2HS_PHY_D1", 0x5fa, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W3_3430_USB2HS_PHY_D2", 0x1d4, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("T4_3430_USB2HS_PHY_D3", 0x1de, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("T3_3430_USB2HS_PHY_D4", 0x1d8, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("R3_3430_USB2HS_PHY_D5", 0x1da, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("R4_3430_USB2HS_PHY_D6", 0x1dc, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("T2_3430_USB2HS_PHY_D7", 0x1d6, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) - -/* TLL - HSUSB: 12-pin TLL Port 1*/ -MUX_CFG_34XX("Y8_3430_USB1HS_TLL_CLK", 0x5da, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y9_3430_USB1HS_TLL_STP", 0x5d8, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AA14_3430_USB1HS_TLL_DIR", 0x5ec, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AA11_3430_USB1HS_TLL_NXT", 0x5ee, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W13_3430_USB1HS_TLL_D0", 0x5dc, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W12_3430_USB1HS_TLL_D1", 0x5de, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W11_3430_USB1HS_TLL_D2", 0x5e0, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y11_3430_USB1HS_TLL_D3", 0x5ea, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W9_3430_USB1HS_TLL_D4", 0x5e4, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y12_3430_USB1HS_TLL_D5", 0x5e6, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W8_3430_USB1HS_TLL_D6", 0x5e8, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y13_3430_USB1HS_TLL_D7", 0x5e2, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) - -/* TLL - HSUSB: 12-pin TLL Port 2*/ -MUX_CFG_34XX("AA8_3430_USB2HS_TLL_CLK", 0x5f0, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AA10_3430_USB2HS_TLL_STP", 0x5f2, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AA9_3430_USB2HS_TLL_DIR", 0x5f4, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB11_3430_USB2HS_TLL_NXT", 0x5f6, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB10_3430_USB2HS_TLL_D0", 0x5f8, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB9_3430_USB2HS_TLL_D1", 0x5fa, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W3_3430_USB2HS_TLL_D2", 0x1d4, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("T4_3430_USB2HS_TLL_D3", 0x1de, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("T3_3430_USB2HS_TLL_D4", 0x1d8, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("R3_3430_USB2HS_TLL_D5", 0x1da, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("R4_3430_USB2HS_TLL_D6", 0x1dc, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("T2_3430_USB2HS_TLL_D7", 0x1d6, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN) - -/* TLL - HSUSB: 12-pin TLL Port 3*/ -MUX_CFG_34XX("AA6_3430_USB3HS_TLL_CLK", 0x180, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB3_3430_USB3HS_TLL_STP", 0x166, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AA3_3430_USB3HS_TLL_DIR", 0x168, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y3_3430_USB3HS_TLL_NXT", 0x16a, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AA5_3430_USB3HS_TLL_D0", 0x186, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y4_3430_USB3HS_TLL_D1", 0x184, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y5_3430_USB3HS_TLL_D2", 0x188, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W5_3430_USB3HS_TLL_D3", 0x18a, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB12_3430_USB3HS_TLL_D4", 0x16c, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB13_3430_USB3HS_TLL_D5", 0x16e, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AA13_3430_USB3HS_TLL_D6", 0x170, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AA12_3430_USB3HS_TLL_D7", 0x172, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) - -/* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */ -MUX_CFG_34XX("AF10_3430_USB1FS_PHY_MM1_RXDP", 0x5d8, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AG9_3430_USB1FS_PHY_MM1_RXDM", 0x5ee, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W13_3430_USB1FS_PHY_MM1_RXRCV", 0x5dc, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W12_3430_USB1FS_PHY_MM1_TXSE0", 0x5de, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W11_3430_USB1FS_PHY_MM1_TXDAT", 0x5e0, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y11_3430_USB1FS_PHY_MM1_TXEN_N", 0x5ea, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT) - -/* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */ -MUX_CFG_34XX("AF7_3430_USB2FS_PHY_MM2_RXDP", 0x5f2, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AH7_3430_USB2FS_PHY_MM2_RXDM", 0x5f6, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB10_3430_USB2FS_PHY_MM2_RXRCV", 0x5f8, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB9_3430_USB2FS_PHY_MM2_TXSE0", 0x5fa, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W3_3430_USB2FS_PHY_MM2_TXDAT", 0x1d4, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("T4_3430_USB2FS_PHY_MM2_TXEN_N", 0x1de, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT) - -/* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */ -MUX_CFG_34XX("AH3_3430_USB3FS_PHY_MM3_RXDP", 0x166, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AE3_3430_USB3FS_PHY_MM3_RXDM", 0x16a, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AD1_3430_USB3FS_PHY_MM3_RXRCV", 0x186, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AE1_3430_USB3FS_PHY_MM3_TXSE0", 0x184, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AD2_3430_USB3FS_PHY_MM3_TXDAT", 0x188, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AC1_3430_USB3FS_PHY_MM3_TXEN_N", 0x18a, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT) - - -/* 34XX GPIO - bidirectional, unless the name has an "_OUT" suffix. - * (Always specify PIN_INPUT, except for names suffixed by "_OUT".) - * No internal pullup/pulldown without "_UP" or "_DOWN" suffix. - */ -MUX_CFG_34XX("AF26_34XX_GPIO0", 0x1e0, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) -MUX_CFG_34XX("AF22_34XX_GPIO9", 0xa18, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) -MUX_CFG_34XX("AG9_34XX_GPIO23", 0x5ee, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) -MUX_CFG_34XX("AH8_34XX_GPIO29", 0x5fa, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) -MUX_CFG_34XX("U8_34XX_GPIO54_OUT", 0x0b4, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("U8_34XX_GPIO54_DOWN", 0x0b4, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("L8_34XX_GPIO63", 0x0ce, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) -MUX_CFG_34XX("G25_34XX_GPIO86_OUT", 0x0fc, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("AG4_34XX_GPIO134_OUT", 0x160, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("AF4_34XX_GPIO135_OUT", 0x162, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("AE4_34XX_GPIO136_OUT", 0x164, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("AF6_34XX_GPIO140_UP", 0x16c, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AE6_34XX_GPIO141", 0x16e, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) -MUX_CFG_34XX("AF5_34XX_GPIO142", 0x170, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) -MUX_CFG_34XX("AE5_34XX_GPIO143", 0x172, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) -MUX_CFG_34XX("H19_34XX_GPIO164_OUT", 0x19c, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("J25_34XX_GPIO170", 0x1c6, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) - -/* OMAP3 SDRC CKE signals to SDR/DDR ram chips */ -MUX_CFG_34XX("H16_34XX_SDRC_CKE0", 0x262, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("H17_34XX_SDRC_CKE1", 0x264, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) - -/* MMC1 */ -MUX_CFG_34XX("N28_3430_MMC1_CLK", 0x144, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("M27_3430_MMC1_CMD", 0x146, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("N27_3430_MMC1_DAT0", 0x148, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("N26_3430_MMC1_DAT1", 0x14a, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("N25_3430_MMC1_DAT2", 0x14c, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("P28_3430_MMC1_DAT3", 0x14e, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("P27_3430_MMC1_DAT4", 0x150, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("P26_3430_MMC1_DAT5", 0x152, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("R27_3430_MMC1_DAT6", 0x154, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("R25_3430_MMC1_DAT7", 0x156, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) - -/* MMC2 */ -MUX_CFG_34XX("AE2_3430_MMC2_CLK", 0x158, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AG5_3430_MMC2_CMD", 0x15A, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AH5_3430_MMC2_DAT0", 0x15c, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AH4_3430_MMC2_DAT1", 0x15e, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AG4_3430_MMC2_DAT2", 0x160, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AF4_3430_MMC2_DAT3", 0x162, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AE4_3430_MMC2_DAT4", 0x164, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AH3_3430_MMC2_DAT5", 0x166, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AF3_3430_MMC2_DAT6", 0x168, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AE3_3430_MMC2_DAT7", 0x16A, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) - -/* MMC3 */ -MUX_CFG_34XX("AF10_3430_MMC3_CLK", 0x5d8, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AC3_3430_MMC3_CMD", 0x1d0, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AE11_3430_MMC3_DAT0", 0x5e4, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AH9_3430_MMC3_DAT1", 0x5e6, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AF13_3430_MMC3_DAT2", 0x5e8, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AF13_3430_MMC3_DAT3", 0x5e2, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP) - -/* SYS_NIRQ T2 INT1 */ -MUX_CFG_34XX("AF26_34XX_SYS_NIRQ", 0x1E0, - OMAP3_WAKEUP_EN | OMAP34XX_PIN_INPUT_PULLUP | - OMAP34XX_MUX_MODE0) -/* EHCI GPIO's on OMAP3EVM (Rev >= E) */ -MUX_CFG_34XX("AH14_34XX_GPIO21", 0x5ea, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AF9_34XX_GPIO22", 0x5ec, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("U3_34XX_GPIO61", 0x0c8, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP) -}; - -#define OMAP34XX_PINS_SZ ARRAY_SIZE(omap34xx_pins) - -#else -#define omap34xx_pins NULL -#define OMAP34XX_PINS_SZ 0 -#endif /* CONFIG_ARCH_OMAP34XX */ - #if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS) + static void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u16 reg) { u16 orig; @@ -631,7 +305,6 @@ static void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u16 r #define omap2_cfg_debug(x, y) do {} while (0) #endif -#ifdef CONFIG_ARCH_OMAP24XX static int __init_or_module omap24xx_cfg_reg(const struct pin_config *cfg) { static DEFINE_SPINLOCK(mux_spin_lock); @@ -650,28 +323,6 @@ static int __init_or_module omap24xx_cfg_reg(const struct pin_config *cfg) return 0; } -#else -#define omap24xx_cfg_reg NULL -#endif - -#ifdef CONFIG_ARCH_OMAP34XX -static int __init_or_module omap34xx_cfg_reg(const struct pin_config *cfg) -{ - static DEFINE_SPINLOCK(mux_spin_lock); - unsigned long flags; - u16 reg = 0; - - spin_lock_irqsave(&mux_spin_lock, flags); - reg |= cfg->mux_val; - omap2_cfg_debug(cfg, reg); - omap_mux_write(reg, cfg->mux_reg - OMAP_MUX_BASE_OFFSET); - spin_unlock_irqrestore(&mux_spin_lock, flags); - - return 0; -} -#else -#define omap34xx_cfg_reg NULL -#endif int __init omap2_mux_init(void) { @@ -694,21 +345,23 @@ int __init omap2_mux_init(void) arch_mux_cfg.pins = omap24xx_pins; arch_mux_cfg.size = OMAP24XX_PINS_SZ; arch_mux_cfg.cfg_reg = omap24xx_cfg_reg; - } else if (cpu_is_omap34xx()) { - arch_mux_cfg.pins = omap34xx_pins; - arch_mux_cfg.size = OMAP34XX_PINS_SZ; - arch_mux_cfg.cfg_reg = omap34xx_cfg_reg; + + return omap_mux_register(&arch_mux_cfg); } - return omap_mux_register(&arch_mux_cfg); + return 0; } +#else +int __init omap2_mux_init(void) +{ + return 0; +} #endif /* CONFIG_OMAP_MUX */ /*----------------------------------------------------------------------------*/ #ifdef CONFIG_ARCH_OMAP34XX - static LIST_HEAD(muxmodes); static DEFINE_MUTEX(muxmode_mutex); @@ -1353,3 +1006,4 @@ int __init omap_mux_init(u32 mux_pbase, u32 mux_size, } #endif /* CONFIG_ARCH_OMAP34XX */ + diff --git a/arch/arm/plat-omap/include/plat/mux.h b/arch/arm/plat-omap/include/plat/mux.h index ba77de6..6067cf7 100644 --- a/arch/arm/plat-omap/include/plat/mux.h +++ b/arch/arm/plat-omap/include/plat/mux.h @@ -130,58 +130,11 @@ #define OMAP2_PULL_UP (1 << 4) #define OMAP2_ALTELECTRICALSEL (1 << 5) -/* 34xx specific mux bit defines */ -#define OMAP3_INPUT_EN (1 << 8) -#define OMAP3_OFF_EN (1 << 9) -#define OMAP3_OFFOUT_EN (1 << 10) -#define OMAP3_OFFOUT_VAL (1 << 11) -#define OMAP3_OFF_PULL_EN (1 << 12) -#define OMAP3_OFF_PULL_UP (1 << 13) -#define OMAP3_WAKEUP_EN (1 << 14) - -/* 34xx mux mode options for each pin. See TRM for options */ -#define OMAP34XX_MUX_MODE0 0 -#define OMAP34XX_MUX_MODE1 1 -#define OMAP34XX_MUX_MODE2 2 -#define OMAP34XX_MUX_MODE3 3 -#define OMAP34XX_MUX_MODE4 4 -#define OMAP34XX_MUX_MODE5 5 -#define OMAP34XX_MUX_MODE6 6 -#define OMAP34XX_MUX_MODE7 7 - -/* 34xx active pin states */ -#define OMAP34XX_PIN_OUTPUT 0 -#define OMAP34XX_PIN_INPUT OMAP3_INPUT_EN -#define OMAP34XX_PIN_INPUT_PULLUP (OMAP2_PULL_ENA | OMAP3_INPUT_EN \ - | OMAP2_PULL_UP) -#define OMAP34XX_PIN_INPUT_PULLDOWN (OMAP2_PULL_ENA | OMAP3_INPUT_EN) - -/* 34xx off mode states */ -#define OMAP34XX_PIN_OFF_NONE 0 -#define OMAP34XX_PIN_OFF_OUTPUT_HIGH (OMAP3_OFF_EN | OMAP3_OFFOUT_EN \ - | OMAP3_OFFOUT_VAL) -#define OMAP34XX_PIN_OFF_OUTPUT_LOW (OMAP3_OFF_EN | OMAP3_OFFOUT_EN) -#define OMAP34XX_PIN_OFF_INPUT_PULLUP (OMAP3_OFF_EN | OMAP3_OFF_PULL_EN \ - | OMAP3_OFF_PULL_UP) -#define OMAP34XX_PIN_OFF_INPUT_PULLDOWN (OMAP3_OFF_EN | OMAP3_OFF_PULL_EN) -#define OMAP34XX_PIN_OFF_WAKEUPENABLE OMAP3_WAKEUP_EN - -#define MUX_CFG_34XX(desc, reg_offset, mux_value) { \ - .name = desc, \ - .debug = 0, \ - .mux_reg = reg_offset, \ - .mux_val = mux_value \ -}, - struct pin_config { char *name; const unsigned int mux_reg; unsigned char debug; -#if defined(CONFIG_ARCH_OMAP34XX) - u16 mux_val; /* Wake-up, off mode, pull, mux mode */ -#endif - #if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP24XX) const unsigned char mask_offset; const unsigned char mask; @@ -681,181 +634,6 @@ enum omap24xx_index { }; -enum omap34xx_index { - /* 34xx I2C */ - K21_34XX_I2C1_SCL, - J21_34XX_I2C1_SDA, - AF15_34XX_I2C2_SCL, - AE15_34XX_I2C2_SDA, - AF14_34XX_I2C3_SCL, - AG14_34XX_I2C3_SDA, - AD26_34XX_I2C4_SCL, - AE26_34XX_I2C4_SDA, - - /* PHY - HSUSB: 12-pin ULPI PHY: Port 1*/ - Y8_3430_USB1HS_PHY_CLK, - Y9_3430_USB1HS_PHY_STP, - AA14_3430_USB1HS_PHY_DIR, - AA11_3430_USB1HS_PHY_NXT, - W13_3430_USB1HS_PHY_DATA0, - W12_3430_USB1HS_PHY_DATA1, - W11_3430_USB1HS_PHY_DATA2, - Y11_3430_USB1HS_PHY_DATA3, - W9_3430_USB1HS_PHY_DATA4, - Y12_3430_USB1HS_PHY_DATA5, - W8_3430_USB1HS_PHY_DATA6, - Y13_3430_USB1HS_PHY_DATA7, - - /* PHY - HSUSB: 12-pin ULPI PHY: Port 2*/ - AA8_3430_USB2HS_PHY_CLK, - AA10_3430_USB2HS_PHY_STP, - AA9_3430_USB2HS_PHY_DIR, - AB11_3430_USB2HS_PHY_NXT, - AB10_3430_USB2HS_PHY_DATA0, - AB9_3430_USB2HS_PHY_DATA1, - W3_3430_USB2HS_PHY_DATA2, - T4_3430_USB2HS_PHY_DATA3, - T3_3430_USB2HS_PHY_DATA4, - R3_3430_USB2HS_PHY_DATA5, - R4_3430_USB2HS_PHY_DATA6, - T2_3430_USB2HS_PHY_DATA7, - - - /* TLL - HSUSB: 12-pin TLL Port 1*/ - Y8_3430_USB1HS_TLL_CLK, - Y9_3430_USB1HS_TLL_STP, - AA14_3430_USB1HS_TLL_DIR, - AA11_3430_USB1HS_TLL_NXT, - W13_3430_USB1HS_TLL_DATA0, - W12_3430_USB1HS_TLL_DATA1, - W11_3430_USB1HS_TLL_DATA2, - Y11_3430_USB1HS_TLL_DATA3, - W9_3430_USB1HS_TLL_DATA4, - Y12_3430_USB1HS_TLL_DATA5, - W8_3430_USB1HS_TLL_DATA6, - Y13_3430_USB1HS_TLL_DATA7, - - /* TLL - HSUSB: 12-pin TLL Port 2*/ - AA8_3430_USB2HS_TLL_CLK, - AA10_3430_USB2HS_TLL_STP, - AA9_3430_USB2HS_TLL_DIR, - AB11_3430_USB2HS_TLL_NXT, - AB10_3430_USB2HS_TLL_DATA0, - AB9_3430_USB2HS_TLL_DATA1, - W3_3430_USB2HS_TLL_DATA2, - T4_3430_USB2HS_TLL_DATA3, - T3_3430_USB2HS_TLL_DATA4, - R3_3430_USB2HS_TLL_DATA5, - R4_3430_USB2HS_TLL_DATA6, - T2_3430_USB2HS_TLL_DATA7, - - /* TLL - HSUSB: 12-pin TLL Port 3*/ - AA6_3430_USB3HS_TLL_CLK, - AB3_3430_USB3HS_TLL_STP, - AA3_3430_USB3HS_TLL_DIR, - Y3_3430_USB3HS_TLL_NXT, - AA5_3430_USB3HS_TLL_DATA0, - Y4_3430_USB3HS_TLL_DATA1, - Y5_3430_USB3HS_TLL_DATA2, - W5_3430_USB3HS_TLL_DATA3, - AB12_3430_USB3HS_TLL_DATA4, - AB13_3430_USB3HS_TLL_DATA5, - AA13_3430_USB3HS_TLL_DATA6, - AA12_3430_USB3HS_TLL_DATA7, - - /* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */ - AF10_3430_USB1FS_PHY_MM1_RXDP, - AG9_3430_USB1FS_PHY_MM1_RXDM, - W13_3430_USB1FS_PHY_MM1_RXRCV, - W12_3430_USB1FS_PHY_MM1_TXSE0, - W11_3430_USB1FS_PHY_MM1_TXDAT, - Y11_3430_USB1FS_PHY_MM1_TXEN_N, - - /* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */ - AF7_3430_USB2FS_PHY_MM2_RXDP, - AH7_3430_USB2FS_PHY_MM2_RXDM, - AB10_3430_USB2FS_PHY_MM2_RXRCV, - AB9_3430_USB2FS_PHY_MM2_TXSE0, - W3_3430_USB2FS_PHY_MM2_TXDAT, - T4_3430_USB2FS_PHY_MM2_TXEN_N, - - /* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */ - AH3_3430_USB3FS_PHY_MM3_RXDP, - AE3_3430_USB3FS_PHY_MM3_RXDM, - AD1_3430_USB3FS_PHY_MM3_RXRCV, - AE1_3430_USB3FS_PHY_MM3_TXSE0, - AD2_3430_USB3FS_PHY_MM3_TXDAT, - AC1_3430_USB3FS_PHY_MM3_TXEN_N, - - /* 34xx GPIO - * - normally these are bidirectional, no internal pullup/pulldown - * - "_UP" suffix (GPIO3_UP) if internal pullup is configured - * - "_DOWN" suffix (GPIO3_DOWN) with internal pulldown - * - "_OUT" suffix (GPIO3_OUT) for output-only pins (unlike 24xx) - */ - AF26_34XX_GPIO0, - AF22_34XX_GPIO9, - AG9_34XX_GPIO23, - AH8_34XX_GPIO29, - U8_34XX_GPIO54_OUT, - U8_34XX_GPIO54_DOWN, - L8_34XX_GPIO63, - G25_34XX_GPIO86_OUT, - AG4_34XX_GPIO134_OUT, - AF4_34XX_GPIO135_OUT, - AE4_34XX_GPIO136_OUT, - AF6_34XX_GPIO140_UP, - AE6_34XX_GPIO141, - AF5_34XX_GPIO142, - AE5_34XX_GPIO143, - H19_34XX_GPIO164_OUT, - J25_34XX_GPIO170, - - /* OMAP3 SDRC CKE signals to SDR/DDR ram chips */ - H16_34XX_SDRC_CKE0, - H17_34XX_SDRC_CKE1, - - /* MMC1 */ - N28_3430_MMC1_CLK, - M27_3430_MMC1_CMD, - N27_3430_MMC1_DAT0, - N26_3430_MMC1_DAT1, - N25_3430_MMC1_DAT2, - P28_3430_MMC1_DAT3, - P27_3430_MMC1_DAT4, - P26_3430_MMC1_DAT5, - R27_3430_MMC1_DAT6, - R25_3430_MMC1_DAT7, - - /* MMC2 */ - AE2_3430_MMC2_CLK, - AG5_3430_MMC2_CMD, - AH5_3430_MMC2_DAT0, - AH4_3430_MMC2_DAT1, - AG4_3430_MMC2_DAT2, - AF4_3430_MMC2_DAT3, - AE4_3430_MMC2_DAT4, - AH3_3430_MMC2_DAT5, - AF3_3430_MMC2_DAT6, - AE3_3430_MMC2_DAT7, - - /* MMC3 */ - AF10_3430_MMC3_CLK, - AC3_3430_MMC3_CMD, - AE11_3430_MMC3_DAT0, - AH9_3430_MMC3_DAT1, - AF13_3430_MMC3_DAT2, - AF13_3430_MMC3_DAT3, - - /* SYS_NIRQ T2 INT1 */ - AF26_34XX_SYS_NIRQ, - - /* EHCI GPIO's for OMAP3EVM (Rev >= E) */ - AH14_34XX_GPIO21, - AF9_34XX_GPIO22, - U3_34XX_GPIO61, -}; - struct omap_mux_cfg { struct pin_config *pins; unsigned long size; @@ -865,14 +643,14 @@ struct omap_mux_cfg { #ifdef CONFIG_OMAP_MUX /* setup pin muxing in Linux */ extern int omap1_mux_init(void); -extern int omap2_mux_init(void); extern int omap_mux_register(struct omap_mux_cfg *); extern int omap_cfg_reg(unsigned long reg_cfg); #else /* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */ static inline int omap1_mux_init(void) { return 0; } -static inline int omap2_mux_init(void) { return 0; } static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; } #endif +extern int omap2_mux_init(void); + #endif -- cgit v0.10.2 From 662c8b55d26abeabc0b125f922dfa66338a046ae Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 11 Dec 2009 16:16:33 -0800 Subject: omap: mux: Add 36xx CBP package support Add 36xx CBP package support Cc: Benoit Cousson Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 87893d2..5a74e14 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -33,6 +33,9 @@ config OMAP_PACKAGE_CBB config OMAP_PACKAGE_CUS bool +config OMAP_PACKAGE_CBP + bool + comment "OMAP Board Type" depends on ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4 @@ -121,6 +124,7 @@ config MACH_OMAP_ZOOM2 config MACH_OMAP_ZOOM3 bool "OMAP3630 Zoom3 board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBP config MACH_CM_T35 bool "CompuLab CM-T35 module" @@ -135,6 +139,7 @@ config MACH_IGEP0020 config MACH_OMAP_3630SDP bool "OMAP3630 SDP board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBP config MACH_OMAP_4430SDP bool "OMAP 4430 SDP board" diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index e6cbc27..7390596 100755 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -85,8 +85,17 @@ static void __init omap_sdp_init_irq(void) omap_gpio_init(); } +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap_sdp_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBP); zoom_peripherals_init(); board_smc91x_init(); enable_board_wakeup_source(); diff --git a/arch/arm/mach-omap2/board-zoom3.c b/arch/arm/mach-omap2/board-zoom3.c index 8d965a6..a9fe918 100644 --- a/arch/arm/mach-omap2/board-zoom3.c +++ b/arch/arm/mach-omap2/board-zoom3.c @@ -21,6 +21,7 @@ #include #include +#include "mux.h" #include "sdram-hynix-h8mbx00u0mer-0em.h" static void __init omap_zoom_map_io(void) @@ -42,8 +43,17 @@ static void __init omap_zoom_init_irq(void) omap_gpio_init(); } +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap_zoom_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBP); zoom_peripherals_init(); zoom_debugboard_init(); } diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h index a6bd58f..d8b4d5a 100644 --- a/arch/arm/mach-omap2/mux.h +++ b/arch/arm/mach-omap2/mux.h @@ -56,6 +56,7 @@ /* Flags for omap_mux_init */ #define OMAP_PACKAGE_MASK 0xffff +#define OMAP_PACKAGE_CBP 4 /* 515-pin 0.40 0.50 */ #define OMAP_PACKAGE_CUS 3 /* 423-pin 0.65 */ #define OMAP_PACKAGE_CBB 2 /* 515-pin 0.40 0.50 */ #define OMAP_PACKAGE_CBC 1 /* 515-pin 0.50 0.65 */ diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c index 116d5b2..68e0a59 100644 --- a/arch/arm/mach-omap2/mux34xx.c +++ b/arch/arm/mach-omap2/mux34xx.c @@ -1549,6 +1549,522 @@ struct omap_ball __initdata omap3_cbb_ball[] = { #define omap3_cbb_ball NULL #endif +/* + * Signals different on 36XX CBP package comapared to 34XX CBC package + */ +#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBP) +struct omap_mux __initdata omap36xx_cbp_subset[] = { + _OMAP3_MUXENTRY(CAM_D0, 99, + "cam_d0", NULL, "csi2_dx2", NULL, + "gpio_99", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D1, 100, + "cam_d1", NULL, "csi2_dy2", NULL, + "gpio_100", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D10, 109, + "cam_d10", "ssi2_wake", NULL, NULL, + "gpio_109", "hw_dbg8", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D2, 101, + "cam_d2", "ssi2_rdy_tx", NULL, NULL, + "gpio_101", "hw_dbg4", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D3, 102, + "cam_d3", "ssi2_dat_rx", NULL, NULL, + "gpio_102", "hw_dbg5", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D4, 103, + "cam_d4", "ssi2_flag_rx", NULL, NULL, + "gpio_103", "hw_dbg6", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D5, 104, + "cam_d5", "ssi2_rdy_rx", NULL, NULL, + "gpio_104", "hw_dbg7", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_HS, 94, + "cam_hs", "ssi2_dat_tx", NULL, NULL, + "gpio_94", "hw_dbg0", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_VS, 95, + "cam_vs", "ssi2_flag_tx", NULL, NULL, + "gpio_95", "hw_dbg1", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA0, 70, + "dss_data0", "dsi_dx0", "uart1_cts", NULL, + "gpio_70", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA1, 71, + "dss_data1", "dsi_dy0", "uart1_rts", NULL, + "gpio_71", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA2, 72, + "dss_data2", "dsi_dx1", NULL, NULL, + "gpio_72", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA3, 73, + "dss_data3", "dsi_dy1", NULL, NULL, + "gpio_73", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA4, 74, + "dss_data4", "dsi_dx2", "uart3_rx_irrx", NULL, + "gpio_74", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA5, 75, + "dss_data5", "dsi_dy2", "uart3_tx_irtx", NULL, + "gpio_75", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA6, 76, + "dss_data6", NULL, "uart1_tx", "dssvenc656_data6", + "gpio_76", "hw_dbg14", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA7, 77, + "dss_data7", NULL, "uart1_rx", "dssvenc656_data7", + "gpio_77", "hw_dbg15", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA8, 78, + "dss_data8", NULL, "uart3_rx_irrx", NULL, + "gpio_78", "hw_dbg16", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA9, 79, + "dss_data9", NULL, "uart3_tx_irtx", NULL, + "gpio_79", "hw_dbg17", NULL, "safe_mode"), + _OMAP3_MUXENTRY(ETK_D12, 26, + "etk_d12", "sys_drm_msecure", NULL, "hsusb2_dir", + "gpio_26", NULL, "hsusb2_tll_dir", "hw_dbg14"), + _OMAP3_MUXENTRY(GPMC_A11, 0, + "gpmc_a11", NULL, NULL, NULL, + NULL, NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_WAIT2, 64, + "gpmc_wait2", NULL, "uart4_tx", NULL, + "gpio_64", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_WAIT3, 65, + "gpmc_wait3", "sys_ndmareq1", "uart4_rx", NULL, + "gpio_65", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA0, 125, + "hsusb0_data0", NULL, "uart3_tx_irtx", NULL, + "gpio_125", "uart2_tx", NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA1, 130, + "hsusb0_data1", NULL, "uart3_rx_irrx", NULL, + "gpio_130", "uart2_rx", NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA2, 131, + "hsusb0_data2", NULL, "uart3_rts_sd", NULL, + "gpio_131", "uart2_rts", NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA3, 169, + "hsusb0_data3", NULL, "uart3_cts_rctx", NULL, + "gpio_169", "uart2_cts", NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP1_CLKR, 156, + "mcbsp1_clkr", "mcspi4_clk", "sim_cd", NULL, + "gpio_156", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP1_FSR, 157, + "mcbsp1_fsr", "adpllv2d_dithering_en1", + "cam_global_reset", NULL, + "gpio_157", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP4_CLKX, 152, + "mcbsp4_clkx", "ssi1_dat_rx", NULL, NULL, + "gpio_152", "hsusb3_tll_data1", "mm3_txse0", "safe_mode"), + _OMAP3_MUXENTRY(MCBSP4_DR, 153, + "mcbsp4_dr", "ssi1_flag_rx", NULL, NULL, + "gpio_153", "hsusb3_tll_data0", "mm3_rxrcv", "safe_mode"), + _OMAP3_MUXENTRY(MCBSP4_DX, 154, + "mcbsp4_dx", "ssi1_rdy_rx", NULL, NULL, + "gpio_154", "hsusb3_tll_data2", "mm3_txdat", "safe_mode"), + _OMAP3_MUXENTRY(MCBSP4_FSX, 155, + "mcbsp4_fsx", "ssi1_wake", NULL, NULL, + "gpio_155", "hsusb3_tll_data3", "mm3_txen_n", "safe_mode"), + _OMAP3_MUXENTRY(MCSPI1_CS1, 175, + "mcspi1_cs1", "adpllv2d_dithering_en2", NULL, "sdmmc3_cmd", + "gpio_175", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SAD2D_MBUSFLAG, 0, + "sad2d_mbusflag", "mad2d_sbusflag", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD28, 0, + "sad2d_mcad28", "mad2d_mcad28", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD29, 0, + "sad2d_mcad29", "mad2d_mcad29", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD32, 0, + "sad2d_mcad32", "mad2d_mcad32", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD33, 0, + "sad2d_mcad33", "mad2d_mcad33", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD34, 0, + "sad2d_mcad34", "mad2d_mcad34", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD35, 0, + "sad2d_mcad35", "mad2d_mcad35", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD36, 0, + "sad2d_mcad36", "mad2d_mcad36", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MREAD, 0, + "sad2d_mread", "mad2d_sread", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MWRITE, 0, + "sad2d_mwrite", "mad2d_swrite", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_SBUSFLAG, 0, + "sad2d_sbusflag", "mad2d_mbusflag", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_SREAD, 0, + "sad2d_sread", "mad2d_mread", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_SWRITE, 0, + "sad2d_swrite", "mad2d_mwrite", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SDMMC1_CLK, 120, + "sdmmc1_clk", "ms_clk", NULL, NULL, + "gpio_120", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_CMD, 121, + "sdmmc1_cmd", "ms_bs", NULL, NULL, + "gpio_121", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT0, 122, + "sdmmc1_dat0", "ms_dat0", NULL, NULL, + "gpio_122", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT1, 123, + "sdmmc1_dat1", "ms_dat1", NULL, NULL, + "gpio_123", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT2, 124, + "sdmmc1_dat2", "ms_dat2", NULL, NULL, + "gpio_124", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT3, 125, + "sdmmc1_dat3", "ms_dat3", NULL, NULL, + "gpio_125", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDRC_CKE0, 0, + "sdrc_cke0", NULL, NULL, NULL, + NULL, NULL, NULL, "safe_mode_out1"), + _OMAP3_MUXENTRY(SDRC_CKE1, 0, + "sdrc_cke1", NULL, NULL, NULL, + NULL, NULL, NULL, "safe_mode_out1"), + _OMAP3_MUXENTRY(SIM_IO, 126, + "sim_io", "sim_io_low_impedance", NULL, NULL, + "gpio_126", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SIM_CLK, 127, + "sim_clk", NULL, NULL, NULL, + "gpio_127", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SIM_PWRCTRL, 128, + "sim_pwrctrl", NULL, NULL, NULL, + "gpio_128", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SIM_RST, 129, + "sim_rst", NULL, NULL, NULL, + "gpio_129", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT0, 2, + "sys_boot0", NULL, NULL, "dss_data18", + "gpio_2", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT1, 3, + "sys_boot1", NULL, NULL, "dss_data19", + "gpio_3", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT3, 5, + "sys_boot3", NULL, NULL, "dss_data20", + "gpio_5", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT4, 6, + "sys_boot4", "sdmmc2_dir_dat2", NULL, "dss_data21", + "gpio_6", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT5, 7, + "sys_boot5", "sdmmc2_dir_dat3", NULL, "dss_data22", + "gpio_7", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT6, 8, + "sys_boot6", NULL, NULL, "dss_data23", + "gpio_8", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART1_CTS, 150, + "uart1_cts", "ssi1_rdy_tx", NULL, NULL, + "gpio_150", "hsusb3_tll_clk", NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART1_RTS, 149, + "uart1_rts", "ssi1_flag_tx", NULL, NULL, + "gpio_149", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART1_TX, 148, + "uart1_tx", "ssi1_dat_tx", NULL, NULL, + "gpio_148", NULL, NULL, "safe_mode"), + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define omap36xx_cbp_subset NULL +#endif + +/* + * Balls for 36XX CBP package + * 515-pin s-PBGA Package, 0.50mm Ball Pitch (Top), 0.40mm Ball Pitch (Bottom) + */ +#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \ + && defined (CONFIG_OMAP_PACKAGE_CBP) +struct omap_ball __initdata omap36xx_cbp_ball[] = { + _OMAP3_BALLENTRY(CAM_D0, "ag17", NULL), + _OMAP3_BALLENTRY(CAM_D1, "ah17", NULL), + _OMAP3_BALLENTRY(CAM_D10, "b25", NULL), + _OMAP3_BALLENTRY(CAM_D11, "c26", NULL), + _OMAP3_BALLENTRY(CAM_D2, "b24", NULL), + _OMAP3_BALLENTRY(CAM_D3, "c24", NULL), + _OMAP3_BALLENTRY(CAM_D4, "d24", NULL), + _OMAP3_BALLENTRY(CAM_D5, "a25", NULL), + _OMAP3_BALLENTRY(CAM_D6, "k28", NULL), + _OMAP3_BALLENTRY(CAM_D7, "l28", NULL), + _OMAP3_BALLENTRY(CAM_D8, "k27", NULL), + _OMAP3_BALLENTRY(CAM_D9, "l27", NULL), + _OMAP3_BALLENTRY(CAM_FLD, "c23", NULL), + _OMAP3_BALLENTRY(CAM_HS, "a24", NULL), + _OMAP3_BALLENTRY(CAM_PCLK, "c27", NULL), + _OMAP3_BALLENTRY(CAM_STROBE, "d25", NULL), + _OMAP3_BALLENTRY(CAM_VS, "a23", NULL), + _OMAP3_BALLENTRY(CAM_WEN, "b23", NULL), + _OMAP3_BALLENTRY(CAM_XCLKA, "c25", NULL), + _OMAP3_BALLENTRY(CAM_XCLKB, "b26", NULL), + _OMAP3_BALLENTRY(CSI2_DX0, "ag19", NULL), + _OMAP3_BALLENTRY(CSI2_DX1, "ag18", NULL), + _OMAP3_BALLENTRY(CSI2_DY0, "ah19", NULL), + _OMAP3_BALLENTRY(CSI2_DY1, "ah18", NULL), + _OMAP3_BALLENTRY(DSS_ACBIAS, "e27", NULL), + _OMAP3_BALLENTRY(DSS_DATA0, "ag22", NULL), + _OMAP3_BALLENTRY(DSS_DATA1, "ah22", NULL), + _OMAP3_BALLENTRY(DSS_DATA10, "ad28", NULL), + _OMAP3_BALLENTRY(DSS_DATA11, "ad27", NULL), + _OMAP3_BALLENTRY(DSS_DATA12, "ab28", NULL), + _OMAP3_BALLENTRY(DSS_DATA13, "ab27", NULL), + _OMAP3_BALLENTRY(DSS_DATA14, "aa28", NULL), + _OMAP3_BALLENTRY(DSS_DATA15, "aa27", NULL), + _OMAP3_BALLENTRY(DSS_DATA16, "g25", NULL), + _OMAP3_BALLENTRY(DSS_DATA17, "h27", NULL), + _OMAP3_BALLENTRY(DSS_DATA18, "h26", NULL), + _OMAP3_BALLENTRY(DSS_DATA19, "h25", NULL), + _OMAP3_BALLENTRY(DSS_DATA2, "ag23", NULL), + _OMAP3_BALLENTRY(DSS_DATA20, "e28", NULL), + _OMAP3_BALLENTRY(DSS_DATA21, "j26", NULL), + _OMAP3_BALLENTRY(DSS_DATA22, "ac27", NULL), + _OMAP3_BALLENTRY(DSS_DATA23, "ac28", NULL), + _OMAP3_BALLENTRY(DSS_DATA3, "ah23", NULL), + _OMAP3_BALLENTRY(DSS_DATA4, "ag24", NULL), + _OMAP3_BALLENTRY(DSS_DATA5, "ah24", NULL), + _OMAP3_BALLENTRY(DSS_DATA6, "e26", NULL), + _OMAP3_BALLENTRY(DSS_DATA7, "f28", NULL), + _OMAP3_BALLENTRY(DSS_DATA8, "f27", NULL), + _OMAP3_BALLENTRY(DSS_DATA9, "g26", NULL), + _OMAP3_BALLENTRY(DSS_HSYNC, "d26", NULL), + _OMAP3_BALLENTRY(DSS_PCLK, "d28", NULL), + _OMAP3_BALLENTRY(DSS_VSYNC, "d27", NULL), + _OMAP3_BALLENTRY(ETK_CLK, "af10", NULL), + _OMAP3_BALLENTRY(ETK_CTL, "ae10", NULL), + _OMAP3_BALLENTRY(ETK_D0, "af11", NULL), + _OMAP3_BALLENTRY(ETK_D1, "ag12", NULL), + _OMAP3_BALLENTRY(ETK_D10, "ae7", NULL), + _OMAP3_BALLENTRY(ETK_D11, "af7", NULL), + _OMAP3_BALLENTRY(ETK_D12, "ag7", NULL), + _OMAP3_BALLENTRY(ETK_D13, "ah7", NULL), + _OMAP3_BALLENTRY(ETK_D14, "ag8", NULL), + _OMAP3_BALLENTRY(ETK_D15, "ah8", NULL), + _OMAP3_BALLENTRY(ETK_D2, "ah12", NULL), + _OMAP3_BALLENTRY(ETK_D3, "ae13", NULL), + _OMAP3_BALLENTRY(ETK_D4, "ae11", NULL), + _OMAP3_BALLENTRY(ETK_D5, "ah9", NULL), + _OMAP3_BALLENTRY(ETK_D6, "af13", NULL), + _OMAP3_BALLENTRY(ETK_D7, "ah14", NULL), + _OMAP3_BALLENTRY(ETK_D8, "af9", NULL), + _OMAP3_BALLENTRY(ETK_D9, "ag9", NULL), + _OMAP3_BALLENTRY(GPMC_A1, "n4", "ac15"), + _OMAP3_BALLENTRY(GPMC_A10, "k3", "ab19"), + _OMAP3_BALLENTRY(GPMC_A11, NULL, "ac20"), + _OMAP3_BALLENTRY(GPMC_A2, "m4", "ab15"), + _OMAP3_BALLENTRY(GPMC_A3, "l4", "ac16"), + _OMAP3_BALLENTRY(GPMC_A4, "k4", "ab16"), + _OMAP3_BALLENTRY(GPMC_A5, "t3", "ac17"), + _OMAP3_BALLENTRY(GPMC_A6, "r3", "ab17"), + _OMAP3_BALLENTRY(GPMC_A7, "n3", "ac18"), + _OMAP3_BALLENTRY(GPMC_A8, "m3", "ab18"), + _OMAP3_BALLENTRY(GPMC_A9, "l3", "ac19"), + _OMAP3_BALLENTRY(GPMC_CLK, "t4", "w2"), + _OMAP3_BALLENTRY(GPMC_D0, "k1", "m2"), + _OMAP3_BALLENTRY(GPMC_D1, "l1", "m1"), + _OMAP3_BALLENTRY(GPMC_D10, "p1", "ab4"), + _OMAP3_BALLENTRY(GPMC_D11, "r1", "ac4"), + _OMAP3_BALLENTRY(GPMC_D12, "r2", "ab6"), + _OMAP3_BALLENTRY(GPMC_D13, "t2", "ac6"), + _OMAP3_BALLENTRY(GPMC_D14, "w1", "ab7"), + _OMAP3_BALLENTRY(GPMC_D15, "y1", "ac7"), + _OMAP3_BALLENTRY(GPMC_D2, "l2", "n2"), + _OMAP3_BALLENTRY(GPMC_D3, "p2", "n1"), + _OMAP3_BALLENTRY(GPMC_D4, "t1", "r2"), + _OMAP3_BALLENTRY(GPMC_D5, "v1", "r1"), + _OMAP3_BALLENTRY(GPMC_D6, "v2", "t2"), + _OMAP3_BALLENTRY(GPMC_D7, "w2", "t1"), + _OMAP3_BALLENTRY(GPMC_D8, "h2", "ab3"), + _OMAP3_BALLENTRY(GPMC_D9, "k2", "ac3"), + _OMAP3_BALLENTRY(GPMC_NADV_ALE, "f3", "w1"), + _OMAP3_BALLENTRY(GPMC_NBE0_CLE, "g3", "ac12"), + _OMAP3_BALLENTRY(GPMC_NBE1, "u3", NULL), + _OMAP3_BALLENTRY(GPMC_NCS0, "g4", "y2"), + _OMAP3_BALLENTRY(GPMC_NCS1, "h3", "y1"), + _OMAP3_BALLENTRY(GPMC_NCS2, "v8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS3, "u8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS4, "t8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS5, "r8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS6, "p8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS7, "n8", NULL), + _OMAP3_BALLENTRY(GPMC_NOE, "g2", "v2"), + _OMAP3_BALLENTRY(GPMC_NWE, "f4", "v1"), + _OMAP3_BALLENTRY(GPMC_NWP, "h1", "ab10"), + _OMAP3_BALLENTRY(GPMC_WAIT0, "m8", "ab12"), + _OMAP3_BALLENTRY(GPMC_WAIT1, "l8", "ac10"), + _OMAP3_BALLENTRY(GPMC_WAIT2, "k8", NULL), + _OMAP3_BALLENTRY(GPMC_WAIT3, "j8", NULL), + _OMAP3_BALLENTRY(HDQ_SIO, "j25", NULL), + _OMAP3_BALLENTRY(HSUSB0_CLK, "t28", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA0, "t27", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA1, "u28", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA2, "u27", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA3, "u26", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA4, "u25", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA5, "v28", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA6, "v27", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA7, "v26", NULL), + _OMAP3_BALLENTRY(HSUSB0_DIR, "r28", NULL), + _OMAP3_BALLENTRY(HSUSB0_NXT, "t26", NULL), + _OMAP3_BALLENTRY(HSUSB0_STP, "t25", NULL), + _OMAP3_BALLENTRY(I2C1_SCL, "k21", NULL), + _OMAP3_BALLENTRY(I2C1_SDA, "j21", NULL), + _OMAP3_BALLENTRY(I2C2_SCL, "af15", NULL), + _OMAP3_BALLENTRY(I2C2_SDA, "ae15", NULL), + _OMAP3_BALLENTRY(I2C3_SCL, "af14", NULL), + _OMAP3_BALLENTRY(I2C3_SDA, "ag14", NULL), + _OMAP3_BALLENTRY(I2C4_SCL, "ad26", NULL), + _OMAP3_BALLENTRY(I2C4_SDA, "ae26", NULL), + _OMAP3_BALLENTRY(JTAG_EMU0, "aa11", NULL), + _OMAP3_BALLENTRY(JTAG_EMU1, "aa10", NULL), + _OMAP3_BALLENTRY(JTAG_RTCK, "aa12", NULL), + _OMAP3_BALLENTRY(JTAG_TCK, "aa13", NULL), + _OMAP3_BALLENTRY(JTAG_TDI, "aa20", NULL), + _OMAP3_BALLENTRY(JTAG_TDO, "aa19", NULL), + _OMAP3_BALLENTRY(JTAG_TMS_TMSC, "aa18", NULL), + _OMAP3_BALLENTRY(MCBSP1_CLKR, "y21", NULL), + _OMAP3_BALLENTRY(MCBSP1_CLKX, "w21", NULL), + _OMAP3_BALLENTRY(MCBSP1_DR, "u21", NULL), + _OMAP3_BALLENTRY(MCBSP1_DX, "v21", NULL), + _OMAP3_BALLENTRY(MCBSP1_FSR, "aa21", NULL), + _OMAP3_BALLENTRY(MCBSP1_FSX, "k26", NULL), + _OMAP3_BALLENTRY(MCBSP2_CLKX, "n21", NULL), + _OMAP3_BALLENTRY(MCBSP2_DR, "r21", NULL), + _OMAP3_BALLENTRY(MCBSP2_DX, "m21", NULL), + _OMAP3_BALLENTRY(MCBSP2_FSX, "p21", NULL), + _OMAP3_BALLENTRY(MCBSP3_CLKX, "af5", NULL), + _OMAP3_BALLENTRY(MCBSP3_DR, "ae6", NULL), + _OMAP3_BALLENTRY(MCBSP3_DX, "af6", NULL), + _OMAP3_BALLENTRY(MCBSP3_FSX, "ae5", NULL), + _OMAP3_BALLENTRY(MCBSP4_CLKX, "ae1", NULL), + _OMAP3_BALLENTRY(MCBSP4_DR, "ad1", NULL), + _OMAP3_BALLENTRY(MCBSP4_DX, "ad2", NULL), + _OMAP3_BALLENTRY(MCBSP4_FSX, "ac1", NULL), + _OMAP3_BALLENTRY(MCBSP_CLKS, "t21", NULL), + _OMAP3_BALLENTRY(MCSPI1_CLK, "ab3", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS0, "ac2", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS1, "ac3", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS2, "ab1", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS3, "ab2", NULL), + _OMAP3_BALLENTRY(MCSPI1_SIMO, "ab4", NULL), + _OMAP3_BALLENTRY(MCSPI1_SOMI, "aa4", NULL), + _OMAP3_BALLENTRY(MCSPI2_CLK, "aa3", NULL), + _OMAP3_BALLENTRY(MCSPI2_CS0, "y4", NULL), + _OMAP3_BALLENTRY(MCSPI2_CS1, "v3", NULL), + _OMAP3_BALLENTRY(MCSPI2_SIMO, "y2", NULL), + _OMAP3_BALLENTRY(MCSPI2_SOMI, "y3", NULL), + _OMAP3_BALLENTRY(SDMMC1_CLK, "n28", NULL), + _OMAP3_BALLENTRY(SDMMC1_CMD, "m27", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT0, "n27", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT1, "n26", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT2, "n25", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT3, "p28", NULL), + _OMAP3_BALLENTRY(SDMMC2_CLK, "ae2", NULL), + _OMAP3_BALLENTRY(SDMMC2_CMD, "ag5", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT0, "ah5", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT1, "ah4", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT2, "ag4", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT3, "af4", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT4, "ae4", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT5, "ah3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT6, "af3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT7, "ae3", NULL), + _OMAP3_BALLENTRY(SDRC_A0, NULL, "n22"), + _OMAP3_BALLENTRY(SDRC_A1, NULL, "n23"), + _OMAP3_BALLENTRY(SDRC_A10, NULL, "v22"), + _OMAP3_BALLENTRY(SDRC_A11, NULL, "v23"), + _OMAP3_BALLENTRY(SDRC_A12, NULL, "w22"), + _OMAP3_BALLENTRY(SDRC_A13, NULL, "w23"), + _OMAP3_BALLENTRY(SDRC_A14, NULL, "y22"), + _OMAP3_BALLENTRY(SDRC_A2, NULL, "p22"), + _OMAP3_BALLENTRY(SDRC_A3, NULL, "p23"), + _OMAP3_BALLENTRY(SDRC_A4, NULL, "r22"), + _OMAP3_BALLENTRY(SDRC_A5, NULL, "r23"), + _OMAP3_BALLENTRY(SDRC_A6, NULL, "t22"), + _OMAP3_BALLENTRY(SDRC_A7, NULL, "t23"), + _OMAP3_BALLENTRY(SDRC_A8, NULL, "u22"), + _OMAP3_BALLENTRY(SDRC_A9, NULL, "u23"), + _OMAP3_BALLENTRY(SDRC_BA0, "h9", "ab21"), + _OMAP3_BALLENTRY(SDRC_BA1, "h10", "ac21"), + _OMAP3_BALLENTRY(SDRC_CKE0, "h16", "j22"), + _OMAP3_BALLENTRY(SDRC_CKE1, "h17", "j23"), + _OMAP3_BALLENTRY(SDRC_CLK, "a13", "a11"), + _OMAP3_BALLENTRY(SDRC_D0, NULL, "j2"), + _OMAP3_BALLENTRY(SDRC_D1, NULL, "j1"), + _OMAP3_BALLENTRY(SDRC_D10, "c15", "b14"), + _OMAP3_BALLENTRY(SDRC_D11, "b16", "a14"), + _OMAP3_BALLENTRY(SDRC_D12, "d17", "b16"), + _OMAP3_BALLENTRY(SDRC_D13, "c17", "a16"), + _OMAP3_BALLENTRY(SDRC_D14, "b17", "b19"), + _OMAP3_BALLENTRY(SDRC_D15, "d18", "a19"), + _OMAP3_BALLENTRY(SDRC_D16, NULL, "b3"), + _OMAP3_BALLENTRY(SDRC_D17, NULL, "a3"), + _OMAP3_BALLENTRY(SDRC_D18, NULL, "b5"), + _OMAP3_BALLENTRY(SDRC_D19, NULL, "a5"), + _OMAP3_BALLENTRY(SDRC_D2, NULL, "g2"), + _OMAP3_BALLENTRY(SDRC_D20, NULL, "b8"), + _OMAP3_BALLENTRY(SDRC_D21, NULL, "a8"), + _OMAP3_BALLENTRY(SDRC_D22, NULL, "b9"), + _OMAP3_BALLENTRY(SDRC_D23, NULL, "a9"), + _OMAP3_BALLENTRY(SDRC_D24, NULL, "b21"), + _OMAP3_BALLENTRY(SDRC_D25, NULL, "a21"), + _OMAP3_BALLENTRY(SDRC_D26, NULL, "d22"), + _OMAP3_BALLENTRY(SDRC_D27, NULL, "d23"), + _OMAP3_BALLENTRY(SDRC_D28, NULL, "e22"), + _OMAP3_BALLENTRY(SDRC_D29, NULL, "e23"), + _OMAP3_BALLENTRY(SDRC_D3, NULL, "g1"), + _OMAP3_BALLENTRY(SDRC_D30, NULL, "g22"), + _OMAP3_BALLENTRY(SDRC_D31, NULL, "g23"), + _OMAP3_BALLENTRY(SDRC_D4, NULL, "f2"), + _OMAP3_BALLENTRY(SDRC_D5, NULL, "f1"), + _OMAP3_BALLENTRY(SDRC_D6, NULL, "d2"), + _OMAP3_BALLENTRY(SDRC_D7, NULL, "d1"), + _OMAP3_BALLENTRY(SDRC_D8, "c14", "b13"), + _OMAP3_BALLENTRY(SDRC_D9, "b14", "a13"), + _OMAP3_BALLENTRY(SDRC_DM0, NULL, "c1"), + _OMAP3_BALLENTRY(SDRC_DM1, "a16", "a17"), + _OMAP3_BALLENTRY(SDRC_DM2, NULL, "a6"), + _OMAP3_BALLENTRY(SDRC_DM3, NULL, "a20"), + _OMAP3_BALLENTRY(SDRC_DQS0, NULL, "c2"), + _OMAP3_BALLENTRY(SDRC_DQS1, "a17", "b17"), + _OMAP3_BALLENTRY(SDRC_DQS2, NULL, "b6"), + _OMAP3_BALLENTRY(SDRC_DQS3, NULL, "b20"), + _OMAP3_BALLENTRY(SDRC_NCAS, "h13", "l22"), + _OMAP3_BALLENTRY(SDRC_NCLK, "a14", "b11"), + _OMAP3_BALLENTRY(SDRC_NCS0, "h11", "m22"), + _OMAP3_BALLENTRY(SDRC_NCS1, "h12", "m23"), + _OMAP3_BALLENTRY(SDRC_NRAS, "h14", "l23"), + _OMAP3_BALLENTRY(SDRC_NWE, "h15", "k23"), + _OMAP3_BALLENTRY(SIM_CLK, "p26", NULL), + _OMAP3_BALLENTRY(SIM_IO, "p27", NULL), + _OMAP3_BALLENTRY(SIM_PWRCTRL, "r27", NULL), + _OMAP3_BALLENTRY(SIM_RST, "r25", NULL), + _OMAP3_BALLENTRY(SYS_32K, "ae25", NULL), + _OMAP3_BALLENTRY(SYS_BOOT0, "ah26", NULL), + _OMAP3_BALLENTRY(SYS_BOOT1, "ag26", NULL), + _OMAP3_BALLENTRY(SYS_BOOT2, "ae14", NULL), + _OMAP3_BALLENTRY(SYS_BOOT3, "af18", NULL), + _OMAP3_BALLENTRY(SYS_BOOT4, "af19", NULL), + _OMAP3_BALLENTRY(SYS_BOOT5, "ae21", NULL), + _OMAP3_BALLENTRY(SYS_BOOT6, "af21", NULL), + _OMAP3_BALLENTRY(SYS_CLKOUT1, "ag25", NULL), + _OMAP3_BALLENTRY(SYS_CLKOUT2, "ae22", NULL), + _OMAP3_BALLENTRY(SYS_CLKREQ, "af25", NULL), + _OMAP3_BALLENTRY(SYS_NIRQ, "af26", NULL), + _OMAP3_BALLENTRY(SYS_NRESWARM, "af24", NULL), + _OMAP3_BALLENTRY(SYS_OFF_MODE, "af22", NULL), + _OMAP3_BALLENTRY(UART1_CTS, "w8", NULL), + _OMAP3_BALLENTRY(UART1_RTS, "aa9", NULL), + _OMAP3_BALLENTRY(UART1_RX, "y8", NULL), + _OMAP3_BALLENTRY(UART1_TX, "aa8", NULL), + _OMAP3_BALLENTRY(UART2_CTS, "ab26", NULL), + _OMAP3_BALLENTRY(UART2_RTS, "ab25", NULL), + _OMAP3_BALLENTRY(UART2_RX, "ad25", NULL), + _OMAP3_BALLENTRY(UART2_TX, "aa25", NULL), + _OMAP3_BALLENTRY(UART3_CTS_RCTX, "h18", NULL), + _OMAP3_BALLENTRY(UART3_RTS_SD, "h19", NULL), + _OMAP3_BALLENTRY(UART3_RX_IRRX, "h20", NULL), + _OMAP3_BALLENTRY(UART3_TX_IRTX, "h21", NULL), + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define omap36xx_cbp_ball NULL +#endif + int __init omap3_mux_init(struct omap_board_mux *board_subset, int flags) { struct omap_mux *package_subset; @@ -1567,6 +2083,10 @@ int __init omap3_mux_init(struct omap_board_mux *board_subset, int flags) package_subset = omap3_cus_subset; package_balls = omap3_cus_ball; break; + case (OMAP_PACKAGE_CBP): + package_subset = omap36xx_cbp_subset; + package_balls = omap36xx_cbp_ball; + break; default: printk(KERN_ERR "mux: Unknown omap package, mux disabled\n"); return -EINVAL; diff --git a/arch/arm/mach-omap2/mux34xx.h b/arch/arm/mach-omap2/mux34xx.h index a7cc871..6543ebf 100644 --- a/arch/arm/mach-omap2/mux34xx.h +++ b/arch/arm/mach-omap2/mux34xx.h @@ -170,10 +170,13 @@ #define OMAP3_CONTROL_PADCONF_SDMMC1_DAT1_OFFSET 0x11a #define OMAP3_CONTROL_PADCONF_SDMMC1_DAT2_OFFSET 0x11c #define OMAP3_CONTROL_PADCONF_SDMMC1_DAT3_OFFSET 0x11e + +/* SDMMC1_DAT4 - DAT7 are SIM_IO SIM_CLK SIM_PWRCTRL and SIM_RST on 36xx */ #define OMAP3_CONTROL_PADCONF_SDMMC1_DAT4_OFFSET 0x120 #define OMAP3_CONTROL_PADCONF_SDMMC1_DAT5_OFFSET 0x122 #define OMAP3_CONTROL_PADCONF_SDMMC1_DAT6_OFFSET 0x124 #define OMAP3_CONTROL_PADCONF_SDMMC1_DAT7_OFFSET 0x126 + #define OMAP3_CONTROL_PADCONF_SDMMC2_CLK_OFFSET 0x128 #define OMAP3_CONTROL_PADCONF_SDMMC2_CMD_OFFSET 0x12a #define OMAP3_CONTROL_PADCONF_SDMMC2_DAT0_OFFSET 0x12c @@ -281,6 +284,7 @@ #define OMAP3_CONTROL_PADCONF_SAD2D_MCAD34_OFFSET 0x1f8 #define OMAP3_CONTROL_PADCONF_SAD2D_MCAD35_OFFSET 0x1fa #define OMAP3_CONTROL_PADCONF_SAD2D_MCAD36_OFFSET 0x1fc + /* Note that 34xx TRM has SAD2D instead of CHASSIS for these */ #define OMAP3_CONTROL_PADCONF_CHASSIS_CLK26MI_OFFSET 0x1fe #define OMAP3_CONTROL_PADCONF_CHASSIS_NRESPWRON_OFFSET 0x200 @@ -302,6 +306,7 @@ #define OMAP3_CONTROL_PADCONF_CHASSIS_MSTDBY_OFFSET 0x220 #define OMAP3_CONTROL_PADCONF_CHASSIS_IDLEREQ_OFFSET 0x222 #define OMAP3_CONTROL_PADCONF_CHASSIS_IDLEACK_OFFSET 0x224 + #define OMAP3_CONTROL_PADCONF_SAD2D_MWRITE_OFFSET 0x226 #define OMAP3_CONTROL_PADCONF_SAD2D_SWRITE_OFFSET 0x228 #define OMAP3_CONTROL_PADCONF_SAD2D_MREAD_OFFSET 0x22a @@ -310,6 +315,43 @@ #define OMAP3_CONTROL_PADCONF_SAD2D_SBUSFLAG_OFFSET 0x230 #define OMAP3_CONTROL_PADCONF_SDRC_CKE0_OFFSET 0x232 #define OMAP3_CONTROL_PADCONF_SDRC_CKE1_OFFSET 0x234 + +/* 36xx only */ +#define OMAP3_CONTROL_PADCONF_GPMC_A11_OFFSET 0x236 +#define OMAP3_CONTROL_PADCONF_SDRC_BA0_OFFSET 0x570 +#define OMAP3_CONTROL_PADCONF_SDRC_BA1_OFFSET 0x572 +#define OMAP3_CONTROL_PADCONF_SDRC_A0_OFFSET 0x574 +#define OMAP3_CONTROL_PADCONF_SDRC_A1_OFFSET 0x576 +#define OMAP3_CONTROL_PADCONF_SDRC_A2_OFFSET 0x578 +#define OMAP3_CONTROL_PADCONF_SDRC_A3_OFFSET 0x57a +#define OMAP3_CONTROL_PADCONF_SDRC_A4_OFFSET 0x57c +#define OMAP3_CONTROL_PADCONF_SDRC_A5_OFFSET 0x57e +#define OMAP3_CONTROL_PADCONF_SDRC_A6_OFFSET 0x580 +#define OMAP3_CONTROL_PADCONF_SDRC_A7_OFFSET 0x582 +#define OMAP3_CONTROL_PADCONF_SDRC_A8_OFFSET 0x584 +#define OMAP3_CONTROL_PADCONF_SDRC_A9_OFFSET 0x586 +#define OMAP3_CONTROL_PADCONF_SDRC_A10_OFFSET 0x588 +#define OMAP3_CONTROL_PADCONF_SDRC_A11_OFFSET 0x58a +#define OMAP3_CONTROL_PADCONF_SDRC_A12_OFFSET 0x58c +#define OMAP3_CONTROL_PADCONF_SDRC_A13_OFFSET 0x58e +#define OMAP3_CONTROL_PADCONF_SDRC_A14_OFFSET 0x590 +#define OMAP3_CONTROL_PADCONF_SDRC_NCS0_OFFSET 0x592 +#define OMAP3_CONTROL_PADCONF_SDRC_NCS1_OFFSET 0x594 +#define OMAP3_CONTROL_PADCONF_SDRC_NCLK_OFFSET 0x596 +#define OMAP3_CONTROL_PADCONF_SDRC_NRAS_OFFSET 0x598 +#define OMAP3_CONTROL_PADCONF_SDRC_NCAS_OFFSET 0x59a +#define OMAP3_CONTROL_PADCONF_SDRC_NWE_OFFSET 0x59c +#define OMAP3_CONTROL_PADCONF_SDRC_DM0_OFFSET 0x59e +#define OMAP3_CONTROL_PADCONF_SDRC_DM1_OFFSET 0x5a0 +#define OMAP3_CONTROL_PADCONF_SDRC_DM2_OFFSET 0x5a2 +#define OMAP3_CONTROL_PADCONF_SDRC_DM3_OFFSET 0x5a4 + +/* 36xx only, these are SDMMC1_DAT4 - DAT7 on 34xx */ +#define OMAP3_CONTROL_PADCONF_SIM_IO_OFFSET 0x120 +#define OMAP3_CONTROL_PADCONF_SIM_CLK_OFFSET 0x122 +#define OMAP3_CONTROL_PADCONF_SIM_PWRCTRL_OFFSET 0x124 +#define OMAP3_CONTROL_PADCONF_SIM_RST_OFFSET 0x126 + #define OMAP3_CONTROL_PADCONF_ETK_CLK_OFFSET 0x5a8 #define OMAP3_CONTROL_PADCONF_ETK_CTL_OFFSET 0x5aa #define OMAP3_CONTROL_PADCONF_ETK_D0_OFFSET 0x5ac -- cgit v0.10.2 From 3bc48014782a89f7201734d3e23865cb283926a7 Mon Sep 17 00:00:00 2001 From: Ladislav Michl Date: Fri, 11 Dec 2009 16:16:33 -0800 Subject: omap: use smc91x_platdata to setup smc91x Use smc91x_platdata to setup smc91x, so we can get rid of OMAP specific stuff in smc91x driver Signed-off-by: Ladislav Michl Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index f4b72c1..91e7b2f 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include @@ -100,6 +101,12 @@ static int fsample_keymap[] = { 0 }; +static struct smc91x_platdata smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + static struct resource smc91x_resources[] = { [0] = { .start = H2P2_DBG_FPGA_ETHR_START, /* Physical */ @@ -190,6 +197,9 @@ static struct platform_device nand_device = { static struct platform_device smc91x_device = { .name = "smc91x", .id = 0, + .dev = { + .platform_data = &smc91x_info, + }, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, }; diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 89ba8ec..eeafe6e 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include @@ -200,6 +201,12 @@ static struct platform_device h2_nand_device = { .resource = &h2_nand_resource, }; +static struct smc91x_platdata h2_smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + static struct resource h2_smc91x_resources[] = { [0] = { .start = OMAP1610_ETHR_START, /* Physical */ @@ -216,6 +223,9 @@ static struct resource h2_smc91x_resources[] = { static struct platform_device h2_smc91x_device = { .name = "smc91x", .id = 0, + .dev = { + .platform_data = &h2_smc91x_info, + }, .num_resources = ARRAY_SIZE(h2_smc91x_resources), .resource = h2_smc91x_resources, }; diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index f5cc0a7..e0aee66 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include @@ -202,6 +203,12 @@ static struct platform_device nand_device = { .resource = &nand_resource, }; +static struct smc91x_platdata smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + static struct resource smc91x_resources[] = { [0] = { .start = OMAP1710_ETHR_START, /* Physical */ @@ -218,6 +225,9 @@ static struct resource smc91x_resources[] = { static struct platform_device smc91x_device = { .name = "smc91x", .id = 0, + .dev = { + .platform_data = &smc91x_info, + }, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, }; diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index cf0fdb9..2133b00 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include @@ -142,6 +143,11 @@ static struct platform_device innovator_kp_device = { .resource = innovator_kp_resources, }; +static struct smc91x_platdata innovator_smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; #ifdef CONFIG_ARCH_OMAP15XX @@ -175,6 +181,9 @@ static struct resource innovator1510_smc91x_resources[] = { static struct platform_device innovator1510_smc91x_device = { .name = "smc91x", .id = 0, + .dev = { + .platform_data = &innovator_smc91x_info, + }, .num_resources = ARRAY_SIZE(innovator1510_smc91x_resources), .resource = innovator1510_smc91x_resources, }; @@ -241,6 +250,9 @@ static struct resource innovator1610_smc91x_resources[] = { static struct platform_device innovator1610_smc91x_device = { .name = "smc91x", .id = 0, + .dev = { + .platform_data = &innovator_smc91x_info, + }, .num_resources = ARRAY_SIZE(innovator1610_smc91x_resources), .resource = innovator1610_smc91x_resources, }; diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 50c92c1..ccea4f4 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #include @@ -115,6 +116,12 @@ static struct platform_device osk5912_flash_device = { .resource = &osk_flash_resource, }; +static struct smc91x_platdata osk5912_smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + static struct resource osk5912_smc91x_resources[] = { [0] = { .start = OMAP_OSK_ETHR_START, /* Physical */ @@ -131,6 +138,9 @@ static struct resource osk5912_smc91x_resources[] = { static struct platform_device osk5912_smc91x_device = { .name = "smc91x", .id = -1, + .dev = { + .platform_data = &osk5912_smc91x_info, + }, .num_resources = ARRAY_SIZE(osk5912_smc91x_resources), .resource = osk5912_smc91x_resources, }; diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index ca7df1e..b9ea312 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include @@ -67,6 +68,12 @@ static int p2_keymap[] = { 0 }; +static struct smc91x_platdata smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + static struct resource smc91x_resources[] = { [0] = { .start = H2P2_DBG_FPGA_ETHR_START, /* Physical */ @@ -157,6 +164,9 @@ static struct platform_device nand_device = { static struct platform_device smc91x_device = { .name = "smc91x", .id = 0, + .dev = { + .platform_data = &smc91x_info, + }, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, }; diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 35c75c1..1691835 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include @@ -106,6 +107,12 @@ static struct platform_device voiceblue_flash_device = { .resource = &voiceblue_flash_resource, }; +static struct smc91x_platdata voiceblue_smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + static struct resource voiceblue_smc91x_resources[] = { [0] = { .start = OMAP_CS2_PHYS + 0x300, @@ -122,6 +129,9 @@ static struct resource voiceblue_smc91x_resources[] = { static struct platform_device voiceblue_smc91x_device = { .name = "smc91x", .id = 0, + .dev = { + .platform_data = &voiceblue_smc91x_info, + }, .num_resources = ARRAY_SIZE(voiceblue_smc91x_resources), .resource = voiceblue_smc91x_resources, }; diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index 8a2ce77..fbbd68d 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include @@ -120,6 +121,12 @@ static void __init apollon_flash_init(void) apollon_flash_resource[0].end = base + SZ_128K - 1; } +static struct smc91x_platdata appolon_smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + static struct resource apollon_smc91x_resources[] = { [0] = { .flags = IORESOURCE_MEM, @@ -134,6 +141,9 @@ static struct resource apollon_smc91x_resources[] = { static struct platform_device apollon_smc91x_device = { .name = "smc91x", .id = -1, + .dev = { + .platform_data = &appolon_smc91x_info, + }, .num_resources = ARRAY_SIZE(apollon_smc91x_resources), .resource = apollon_smc91x_resources, }; diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c index 6083e21..877c6f5 100644 --- a/arch/arm/mach-omap2/gpmc-smc91x.c +++ b/arch/arm/mach-omap2/gpmc-smc91x.c @@ -33,17 +33,19 @@ static struct resource gpmc_smc91x_resources[] = { }; static struct smc91x_platdata gpmc_smc91x_info = { - .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_0, + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_0, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, }; static struct platform_device gpmc_smc91x_device = { .name = "smc91x", .id = -1, - .num_resources = ARRAY_SIZE(gpmc_smc91x_resources), - .resource = gpmc_smc91x_resources, .dev = { .platform_data = &gpmc_smc91x_info, }, + .num_resources = ARRAY_SIZE(gpmc_smc91x_resources), + .resource = gpmc_smc91x_resources, }; /* diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c index 09c1107..923c962 100644 --- a/arch/arm/plat-omap/debug-devices.c +++ b/arch/arm/plat-omap/debug-devices.c @@ -13,6 +13,7 @@ #include #include #include +#include #include @@ -24,6 +25,12 @@ * platforms include H2, H3, H4, and Perseus2. */ +static struct smc91x_platdata smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + static struct resource smc91x_resources[] = { [0] = { .flags = IORESOURCE_MEM, @@ -36,6 +43,9 @@ static struct resource smc91x_resources[] = { static struct platform_device smc91x_device = { .name = "smc91x", .id = -1, + .dev = { + .platform_data = &smc91x_info, + }, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, }; -- cgit v0.10.2 From e2b18e3018630d80eda54508e697d613283d57ac Mon Sep 17 00:00:00 2001 From: Ladislav Michl Date: Fri, 11 Dec 2009 16:16:33 -0800 Subject: smc91x: remove OMAP specific bits Now that all OMAP boards are using the board resources, we don't need to keep the arch/board specific crap in the driver header. Cc: linux-net@vger.kernel.org Acked-by: Nicolas Pitre Signed-off-by: Ladislav Michl Signed-off-by: Tony Lindgren diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index 7815bfc..5479954 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -206,21 +206,6 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg) } } -#elif defined(CONFIG_ARCH_OMAP) - -/* We can only do 16-bit reads and writes in the static memory space. */ -#define SMC_CAN_USE_8BIT 0 -#define SMC_CAN_USE_16BIT 1 -#define SMC_CAN_USE_32BIT 0 -#define SMC_IO_SHIFT 0 -#define SMC_NOWAIT 1 - -#define SMC_inw(a, r) readw((a) + (r)) -#define SMC_outw(v, a, r) writew(v, (a) + (r)) -#define SMC_insw(a, r, p, l) readsw((a) + (r), p, l) -#define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l) -#define SMC_IRQ_FLAGS (-1) /* from resource */ - #elif defined(CONFIG_SH_SH4202_MICRODEV) #define SMC_CAN_USE_8BIT 0 -- cgit v0.10.2 From 414f552ad872e19a7471644317a60f3cbba25ced Mon Sep 17 00:00:00 2001 From: Ladislav Michl Date: Fri, 11 Dec 2009 16:16:33 -0800 Subject: omap1: Use gen_nand Since omapnand driver never find its way into mainline, switch to gen_nand instead. Following patch is compile tested only, but it is based on code I wrote for NetStar board and runtime tested it there. Signed-off-by: Ladislav Michl Cc: Imre Deak Cc: Brian Swetland Cc: Kevin Hilman Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 91e7b2f..7e70c3c 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -31,7 +31,6 @@ #include #include #include -#include #include #include #include @@ -174,8 +173,40 @@ static struct platform_device nor_device = { .resource = &nor_resource, }; -static struct omap_nand_platform_data nand_data = { - .options = NAND_SAMSUNG_LP_OPTIONS, +static void nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + unsigned long mask; + + if (cmd == NAND_CMD_NONE) + return; + + mask = (ctrl & NAND_CLE) ? 0x02 : 0; + if (ctrl & NAND_ALE) + mask |= 0x04; + writeb(cmd, (unsigned long)this->IO_ADDR_W | mask); +} + +#define FSAMPLE_NAND_RB_GPIO_PIN 62 + +static int nand_dev_ready(struct mtd_info *mtd) +{ + return gpio_get_value(FSAMPLE_NAND_RB_GPIO_PIN); +} + +static const char *part_probes[] = { "cmdlinepart", NULL }; + +static struct platform_nand_data nand_data = { + .chip = { + .nr_chips = 1, + .chip_offset = 0, + .options = NAND_SAMSUNG_LP_OPTIONS, + .part_probe_types = part_probes, + }, + .ctrl = { + .cmd_ctrl = nand_cmd_ctl, + .dev_ready = nand_dev_ready, + }, }; static struct resource nand_resource = { @@ -185,7 +216,7 @@ static struct resource nand_resource = { }; static struct platform_device nand_device = { - .name = "omapnand", + .name = "gen_nand", .id = 0, .dev = { .platform_data = &nand_data, @@ -243,13 +274,6 @@ static struct platform_device *devices[] __initdata = { &lcd_device, }; -#define P2_NAND_RB_GPIO_PIN 62 - -static int nand_dev_ready(struct omap_nand_platform_data *data) -{ - return gpio_get_value(P2_NAND_RB_GPIO_PIN); -} - static struct omap_lcd_config fsample_lcd_config __initdata = { .ctrl_name = "internal", }; @@ -260,9 +284,9 @@ static struct omap_board_config_kernel fsample_config[] = { static void __init omap_fsample_init(void) { - if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0) + if (gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0) BUG(); - nand_data.dev_ready = nand_dev_ready; + gpio_direction_input(FSAMPLE_NAND_RB_GPIO_PIN); omap_cfg_reg(L3_1610_FLASH_CS2B_OE); omap_cfg_reg(M8_1610_FLASH_CS2B_WE); diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index eeafe6e..fa7cece 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -41,7 +41,6 @@ #include #include #include -#include #include #include #include @@ -180,11 +179,43 @@ static struct mtd_partition h2_nand_partitions[] = { }, }; -/* dip switches control NAND chip access: 8 bit, 16 bit, or neither */ -static struct omap_nand_platform_data h2_nand_data = { - .options = NAND_SAMSUNG_LP_OPTIONS, - .parts = h2_nand_partitions, - .nr_parts = ARRAY_SIZE(h2_nand_partitions), +static void h2_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + unsigned long mask; + + if (cmd == NAND_CMD_NONE) + return; + + mask = (ctrl & NAND_CLE) ? 0x02 : 0; + if (ctrl & NAND_ALE) + mask |= 0x04; + writeb(cmd, (unsigned long)this->IO_ADDR_W | mask); +} + +#define H2_NAND_RB_GPIO_PIN 62 + +static int h2_nand_dev_ready(struct mtd_info *mtd) +{ + return gpio_get_value(H2_NAND_RB_GPIO_PIN); +} + +static const char *h2_part_probes[] = { "cmdlinepart", NULL }; + +struct platform_nand_data h2_nand_platdata = { + .chip = { + .nr_chips = 1, + .chip_offset = 0, + .nr_partitions = ARRAY_SIZE(h2_nand_partitions), + .partitions = h2_nand_partitions, + .options = NAND_SAMSUNG_LP_OPTIONS, + .part_probe_types = h2_part_probes, + }, + .ctrl = { + .cmd_ctrl = h2_nand_cmd_ctl, + .dev_ready = h2_nand_dev_ready, + + }, }; static struct resource h2_nand_resource = { @@ -192,10 +223,10 @@ static struct resource h2_nand_resource = { }; static struct platform_device h2_nand_device = { - .name = "omapnand", + .name = "gen_nand", .id = 0, .dev = { - .platform_data = &h2_nand_data, + .platform_data = &h2_nand_platdata, }, .num_resources = 1, .resource = &h2_nand_resource, @@ -378,8 +409,6 @@ static struct omap_board_config_kernel h2_config[] __initdata = { { OMAP_TAG_LCD, &h2_lcd_config }, }; -#define H2_NAND_RB_GPIO_PIN 62 - static void __init h2_init(void) { /* Here we assume the NOR boot config: NOR on CS3 (possibly swapped diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index e0aee66..6a7f9c3 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -43,7 +43,6 @@ #include #include #include -#include #include #include #include @@ -182,11 +181,43 @@ static struct mtd_partition nand_partitions[] = { }, }; -/* dip switches control NAND chip access: 8 bit, 16 bit, or neither */ -static struct omap_nand_platform_data nand_data = { - .options = NAND_SAMSUNG_LP_OPTIONS, - .parts = nand_partitions, - .nr_parts = ARRAY_SIZE(nand_partitions), +static void nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + unsigned long mask; + + if (cmd == NAND_CMD_NONE) + return; + + mask = (ctrl & NAND_CLE) ? 0x02 : 0; + if (ctrl & NAND_ALE) + mask |= 0x04; + writeb(cmd, (unsigned long)this->IO_ADDR_W | mask); +} + +#define H3_NAND_RB_GPIO_PIN 10 + +static int nand_dev_ready(struct mtd_info *mtd) +{ + return gpio_get_value(H3_NAND_RB_GPIO_PIN); +} + +static const char *part_probes[] = { "cmdlinepart", NULL }; + +struct platform_nand_data nand_platdata = { + .chip = { + .nr_chips = 1, + .chip_offset = 0, + .nr_partitions = ARRAY_SIZE(nand_partitions), + .partitions = nand_partitions, + .options = NAND_SAMSUNG_LP_OPTIONS, + .part_probe_types = part_probes, + }, + .ctrl = { + .cmd_ctrl = nand_cmd_ctl, + .dev_ready = nand_dev_ready, + + }, }; static struct resource nand_resource = { @@ -194,10 +225,10 @@ static struct resource nand_resource = { }; static struct platform_device nand_device = { - .name = "omapnand", + .name = "gen_nand", .id = 0, .dev = { - .platform_data = &nand_data, + .platform_data = &nand_platdata, }, .num_resources = 1, .resource = &nand_resource, @@ -342,13 +373,6 @@ static struct i2c_board_info __initdata h3_i2c_board_info[] = { }, }; -#define H3_NAND_RB_GPIO_PIN 10 - -static int nand_dev_ready(struct omap_nand_platform_data *data) -{ - return gpio_get_value(H3_NAND_RB_GPIO_PIN); -} - static void __init h3_init(void) { /* Here we assume the NOR boot config: NOR on CS3 (possibly swapped @@ -366,7 +390,7 @@ static void __init h3_init(void) nand_resource.end += SZ_4K - 1; if (gpio_request(H3_NAND_RB_GPIO_PIN, "NAND ready") < 0) BUG(); - nand_data.dev_ready = nand_dev_ready; + gpio_direction_input(H3_NAND_RB_GPIO_PIN); /* GPIO10 Func_MUX_CTRL reg bit 29:27, Configure V2 to mode1 as GPIO */ /* GPIO10 pullup/down register, Enable pullup on GPIO10 */ diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index b9ea312..1387a4f 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -31,7 +31,6 @@ #include #include #include -#include #include #include #include @@ -141,8 +140,40 @@ static struct platform_device nor_device = { .resource = &nor_resource, }; -static struct omap_nand_platform_data nand_data = { - .options = NAND_SAMSUNG_LP_OPTIONS, +static void nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + unsigned long mask; + + if (cmd == NAND_CMD_NONE) + return; + + mask = (ctrl & NAND_CLE) ? 0x02 : 0; + if (ctrl & NAND_ALE) + mask |= 0x04; + writeb(cmd, (unsigned long)this->IO_ADDR_W | mask); +} + +#define P2_NAND_RB_GPIO_PIN 62 + +static int nand_dev_ready(struct mtd_info *mtd) +{ + return gpio_get_value(P2_NAND_RB_GPIO_PIN); +} + +static const char *part_probes[] = { "cmdlinepart", NULL }; + +static struct platform_nand_data nand_data = { + .chip = { + .nr_chips = 1, + .chip_offset = 0, + .options = NAND_SAMSUNG_LP_OPTIONS, + .part_probe_types = part_probes, + }, + .ctrl = { + .cmd_ctrl = nand_cmd_ctl, + .dev_ready = nand_dev_ready, + }, }; static struct resource nand_resource = { @@ -152,7 +183,7 @@ static struct resource nand_resource = { }; static struct platform_device nand_device = { - .name = "omapnand", + .name = "gen_nand", .id = 0, .dev = { .platform_data = &nand_data, @@ -211,13 +242,6 @@ static struct platform_device *devices[] __initdata = { &lcd_device, }; -#define P2_NAND_RB_GPIO_PIN 62 - -static int nand_dev_ready(struct omap_nand_platform_data *data) -{ - return gpio_get_value(P2_NAND_RB_GPIO_PIN); -} - static struct omap_lcd_config perseus2_lcd_config __initdata = { .ctrl_name = "internal", }; @@ -230,7 +254,7 @@ static void __init omap_perseus2_init(void) { if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0) BUG(); - nand_data.dev_ready = nand_dev_ready; + gpio_direction_input(P2_NAND_RB_GPIO_PIN); omap_cfg_reg(L3_1610_FLASH_CS2B_OE); omap_cfg_reg(M8_1610_FLASH_CS2B_WE); -- cgit v0.10.2 From f8e9e98454606e43b728269de21db349f57861c7 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Fri, 11 Dec 2009 16:16:33 -0800 Subject: omap1: DMA: move LCD related code from plat-omap to mach-omap1 All of the LCD DMA code in plat-omap/dma.c appears to be OMAP1-only (and apparently only is available on a subset of OMAP1 chips). Move this code to mach-omap1/lcd_dma.c. Tested on OMAP1510 Amstrad Delta. Compile-tested with omap_generic_2420_defconfig. Reported-by: Paul Walmsley Signed-off-by: Janusz Krzysztofik Reviewed-by: Paul Walmsley Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index 191e0cf..9ce17f1 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -52,3 +52,7 @@ led-$(CONFIG_MACH_OMAP_INNOVATOR) += leds-innovator.o led-$(CONFIG_MACH_OMAP_PERSEUS2) += leds-h2p2-debug.o led-$(CONFIG_MACH_OMAP_OSK) += leds-osk.o obj-$(CONFIG_LEDS) += $(led-y) + +ifneq ($(CONFIG_FB_OMAP),) +obj-y += lcd_dma.o +endif diff --git a/arch/arm/mach-omap1/include/mach/lcd_dma.h b/arch/arm/mach-omap1/include/mach/lcd_dma.h new file mode 100644 index 0000000..d7a457b --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/lcd_dma.h @@ -0,0 +1,78 @@ +/* + * arch/arm/mach-omap1/include/mach/lcd_dma.h + * + * Extracted from arch/arm/plat-omap/include/plat/dma.h + * Copyright (C) 2003 Nokia Corporation + * Author: Juha Yrjölä + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __MACH_OMAP1_LCD_DMA_H__ +#define __MACH_OMAP1_LCD_DMA_H__ + +/* Hardware registers for LCD DMA */ +#define OMAP1510_DMA_LCD_BASE (0xfffedb00) +#define OMAP1510_DMA_LCD_CTRL (OMAP1510_DMA_LCD_BASE + 0x00) +#define OMAP1510_DMA_LCD_TOP_F1_L (OMAP1510_DMA_LCD_BASE + 0x02) +#define OMAP1510_DMA_LCD_TOP_F1_U (OMAP1510_DMA_LCD_BASE + 0x04) +#define OMAP1510_DMA_LCD_BOT_F1_L (OMAP1510_DMA_LCD_BASE + 0x06) +#define OMAP1510_DMA_LCD_BOT_F1_U (OMAP1510_DMA_LCD_BASE + 0x08) + +#define OMAP1610_DMA_LCD_BASE (0xfffee300) +#define OMAP1610_DMA_LCD_CSDP (OMAP1610_DMA_LCD_BASE + 0xc0) +#define OMAP1610_DMA_LCD_CCR (OMAP1610_DMA_LCD_BASE + 0xc2) +#define OMAP1610_DMA_LCD_CTRL (OMAP1610_DMA_LCD_BASE + 0xc4) +#define OMAP1610_DMA_LCD_TOP_B1_L (OMAP1610_DMA_LCD_BASE + 0xc8) +#define OMAP1610_DMA_LCD_TOP_B1_U (OMAP1610_DMA_LCD_BASE + 0xca) +#define OMAP1610_DMA_LCD_BOT_B1_L (OMAP1610_DMA_LCD_BASE + 0xcc) +#define OMAP1610_DMA_LCD_BOT_B1_U (OMAP1610_DMA_LCD_BASE + 0xce) +#define OMAP1610_DMA_LCD_TOP_B2_L (OMAP1610_DMA_LCD_BASE + 0xd0) +#define OMAP1610_DMA_LCD_TOP_B2_U (OMAP1610_DMA_LCD_BASE + 0xd2) +#define OMAP1610_DMA_LCD_BOT_B2_L (OMAP1610_DMA_LCD_BASE + 0xd4) +#define OMAP1610_DMA_LCD_BOT_B2_U (OMAP1610_DMA_LCD_BASE + 0xd6) +#define OMAP1610_DMA_LCD_SRC_EI_B1 (OMAP1610_DMA_LCD_BASE + 0xd8) +#define OMAP1610_DMA_LCD_SRC_FI_B1_L (OMAP1610_DMA_LCD_BASE + 0xda) +#define OMAP1610_DMA_LCD_SRC_EN_B1 (OMAP1610_DMA_LCD_BASE + 0xe0) +#define OMAP1610_DMA_LCD_SRC_FN_B1 (OMAP1610_DMA_LCD_BASE + 0xe4) +#define OMAP1610_DMA_LCD_LCH_CTRL (OMAP1610_DMA_LCD_BASE + 0xea) +#define OMAP1610_DMA_LCD_SRC_FI_B1_U (OMAP1610_DMA_LCD_BASE + 0xf4) + +/* LCD DMA block numbers */ +enum { + OMAP_LCD_DMA_B1_TOP, + OMAP_LCD_DMA_B1_BOTTOM, + OMAP_LCD_DMA_B2_TOP, + OMAP_LCD_DMA_B2_BOTTOM +}; + +/* LCD DMA functions */ +extern int omap_request_lcd_dma(void (*callback)(u16 status, void *data), + void *data); +extern void omap_free_lcd_dma(void); +extern void omap_setup_lcd_dma(void); +extern void omap_enable_lcd_dma(void); +extern void omap_stop_lcd_dma(void); +extern void omap_set_lcd_dma_ext_controller(int external); +extern void omap_set_lcd_dma_single_transfer(int single); +extern void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres, + int data_type); +extern void omap_set_lcd_dma_b1_rotation(int rotate); +extern void omap_set_lcd_dma_b1_vxres(unsigned long vxres); +extern void omap_set_lcd_dma_b1_mirror(int mirror); +extern void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale); + +extern int omap_lcd_dma_running(void); + +#endif /* __MACH_OMAP1_LCD_DMA_H__ */ diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c new file mode 100644 index 0000000..4889514 --- /dev/null +++ b/arch/arm/mach-omap1/lcd_dma.c @@ -0,0 +1,447 @@ +/* + * linux/arch/arm/mach-omap1/lcd_dma.c + * + * Extracted from arch/arm/plat-omap/dma.c + * Copyright (C) 2003 - 2008 Nokia Corporation + * Author: Juha Yrjölä + * DMA channel linking for 1610 by Samuel Ortiz + * Graphics DMA and LCD DMA graphics tranformations + * by Imre Deak + * OMAP2/3 support Copyright (C) 2004-2007 Texas Instruments, Inc. + * Merged to support both OMAP1 and OMAP2 by Tony Lindgren + * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc. + * + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support - Santosh Shilimkar + * + * Support functions for the OMAP internal DMA channels. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include + +#include +#include + +int omap_lcd_dma_running(void) +{ + /* + * On OMAP1510, internal LCD controller will start the transfer + * when it gets enabled, so assume DMA running if LCD enabled. + */ + if (cpu_is_omap1510()) + if (omap_readw(0xfffec000 + 0x00) & (1 << 0)) + return 1; + + /* Check if LCD DMA is running */ + if (cpu_is_omap16xx()) + if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN) + return 1; + + return 0; +} + +static struct lcd_dma_info { + spinlock_t lock; + int reserved; + void (*callback)(u16 status, void *data); + void *cb_data; + + int active; + unsigned long addr, size; + int rotate, data_type, xres, yres; + int vxres; + int mirror; + int xscale, yscale; + int ext_ctrl; + int src_port; + int single_transfer; +} lcd_dma; + +void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres, + int data_type) +{ + lcd_dma.addr = addr; + lcd_dma.data_type = data_type; + lcd_dma.xres = fb_xres; + lcd_dma.yres = fb_yres; +} +EXPORT_SYMBOL(omap_set_lcd_dma_b1); + +void omap_set_lcd_dma_src_port(int port) +{ + lcd_dma.src_port = port; +} + +void omap_set_lcd_dma_ext_controller(int external) +{ + lcd_dma.ext_ctrl = external; +} +EXPORT_SYMBOL(omap_set_lcd_dma_ext_controller); + +void omap_set_lcd_dma_single_transfer(int single) +{ + lcd_dma.single_transfer = single; +} +EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer); + +void omap_set_lcd_dma_b1_rotation(int rotate) +{ + if (cpu_is_omap1510()) { + printk(KERN_ERR "DMA rotation is not supported in 1510 mode\n"); + BUG(); + return; + } + lcd_dma.rotate = rotate; +} +EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation); + +void omap_set_lcd_dma_b1_mirror(int mirror) +{ + if (cpu_is_omap1510()) { + printk(KERN_ERR "DMA mirror is not supported in 1510 mode\n"); + BUG(); + } + lcd_dma.mirror = mirror; +} +EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror); + +void omap_set_lcd_dma_b1_vxres(unsigned long vxres) +{ + if (cpu_is_omap1510()) { + printk(KERN_ERR "DMA virtual resulotion is not supported " + "in 1510 mode\n"); + BUG(); + } + lcd_dma.vxres = vxres; +} +EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres); + +void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale) +{ + if (cpu_is_omap1510()) { + printk(KERN_ERR "DMA scale is not supported in 1510 mode\n"); + BUG(); + } + lcd_dma.xscale = xscale; + lcd_dma.yscale = yscale; +} +EXPORT_SYMBOL(omap_set_lcd_dma_b1_scale); + +static void set_b1_regs(void) +{ + unsigned long top, bottom; + int es; + u16 w; + unsigned long en, fn; + long ei, fi; + unsigned long vxres; + unsigned int xscale, yscale; + + switch (lcd_dma.data_type) { + case OMAP_DMA_DATA_TYPE_S8: + es = 1; + break; + case OMAP_DMA_DATA_TYPE_S16: + es = 2; + break; + case OMAP_DMA_DATA_TYPE_S32: + es = 4; + break; + default: + BUG(); + return; + } + + vxres = lcd_dma.vxres ? lcd_dma.vxres : lcd_dma.xres; + xscale = lcd_dma.xscale ? lcd_dma.xscale : 1; + yscale = lcd_dma.yscale ? lcd_dma.yscale : 1; + BUG_ON(vxres < lcd_dma.xres); + +#define PIXADDR(x, y) (lcd_dma.addr + \ + ((y) * vxres * yscale + (x) * xscale) * es) +#define PIXSTEP(sx, sy, dx, dy) (PIXADDR(dx, dy) - PIXADDR(sx, sy) - es + 1) + + switch (lcd_dma.rotate) { + case 0: + if (!lcd_dma.mirror) { + top = PIXADDR(0, 0); + bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); + /* 1510 DMA requires the bottom address to be 2 more + * than the actual last memory access location. */ + if (cpu_is_omap1510() && + lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32) + bottom += 2; + ei = PIXSTEP(0, 0, 1, 0); + fi = PIXSTEP(lcd_dma.xres - 1, 0, 0, 1); + } else { + top = PIXADDR(lcd_dma.xres - 1, 0); + bottom = PIXADDR(0, lcd_dma.yres - 1); + ei = PIXSTEP(1, 0, 0, 0); + fi = PIXSTEP(0, 0, lcd_dma.xres - 1, 1); + } + en = lcd_dma.xres; + fn = lcd_dma.yres; + break; + case 90: + if (!lcd_dma.mirror) { + top = PIXADDR(0, lcd_dma.yres - 1); + bottom = PIXADDR(lcd_dma.xres - 1, 0); + ei = PIXSTEP(0, 1, 0, 0); + fi = PIXSTEP(0, 0, 1, lcd_dma.yres - 1); + } else { + top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); + bottom = PIXADDR(0, 0); + ei = PIXSTEP(0, 1, 0, 0); + fi = PIXSTEP(1, 0, 0, lcd_dma.yres - 1); + } + en = lcd_dma.yres; + fn = lcd_dma.xres; + break; + case 180: + if (!lcd_dma.mirror) { + top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); + bottom = PIXADDR(0, 0); + ei = PIXSTEP(1, 0, 0, 0); + fi = PIXSTEP(0, 1, lcd_dma.xres - 1, 0); + } else { + top = PIXADDR(0, lcd_dma.yres - 1); + bottom = PIXADDR(lcd_dma.xres - 1, 0); + ei = PIXSTEP(0, 0, 1, 0); + fi = PIXSTEP(lcd_dma.xres - 1, 1, 0, 0); + } + en = lcd_dma.xres; + fn = lcd_dma.yres; + break; + case 270: + if (!lcd_dma.mirror) { + top = PIXADDR(lcd_dma.xres - 1, 0); + bottom = PIXADDR(0, lcd_dma.yres - 1); + ei = PIXSTEP(0, 0, 0, 1); + fi = PIXSTEP(1, lcd_dma.yres - 1, 0, 0); + } else { + top = PIXADDR(0, 0); + bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); + ei = PIXSTEP(0, 0, 0, 1); + fi = PIXSTEP(0, lcd_dma.yres - 1, 1, 0); + } + en = lcd_dma.yres; + fn = lcd_dma.xres; + break; + default: + BUG(); + return; /* Suppress warning about uninitialized vars */ + } + + if (cpu_is_omap1510()) { + omap_writew(top >> 16, OMAP1510_DMA_LCD_TOP_F1_U); + omap_writew(top, OMAP1510_DMA_LCD_TOP_F1_L); + omap_writew(bottom >> 16, OMAP1510_DMA_LCD_BOT_F1_U); + omap_writew(bottom, OMAP1510_DMA_LCD_BOT_F1_L); + + return; + } + + /* 1610 regs */ + omap_writew(top >> 16, OMAP1610_DMA_LCD_TOP_B1_U); + omap_writew(top, OMAP1610_DMA_LCD_TOP_B1_L); + omap_writew(bottom >> 16, OMAP1610_DMA_LCD_BOT_B1_U); + omap_writew(bottom, OMAP1610_DMA_LCD_BOT_B1_L); + + omap_writew(en, OMAP1610_DMA_LCD_SRC_EN_B1); + omap_writew(fn, OMAP1610_DMA_LCD_SRC_FN_B1); + + w = omap_readw(OMAP1610_DMA_LCD_CSDP); + w &= ~0x03; + w |= lcd_dma.data_type; + omap_writew(w, OMAP1610_DMA_LCD_CSDP); + + w = omap_readw(OMAP1610_DMA_LCD_CTRL); + /* Always set the source port as SDRAM for now*/ + w &= ~(0x03 << 6); + if (lcd_dma.callback != NULL) + w |= 1 << 1; /* Block interrupt enable */ + else + w &= ~(1 << 1); + omap_writew(w, OMAP1610_DMA_LCD_CTRL); + + if (!(lcd_dma.rotate || lcd_dma.mirror || + lcd_dma.vxres || lcd_dma.xscale || lcd_dma.yscale)) + return; + + w = omap_readw(OMAP1610_DMA_LCD_CCR); + /* Set the double-indexed addressing mode */ + w |= (0x03 << 12); + omap_writew(w, OMAP1610_DMA_LCD_CCR); + + omap_writew(ei, OMAP1610_DMA_LCD_SRC_EI_B1); + omap_writew(fi >> 16, OMAP1610_DMA_LCD_SRC_FI_B1_U); + omap_writew(fi, OMAP1610_DMA_LCD_SRC_FI_B1_L); +} + +static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id) +{ + u16 w; + + w = omap_readw(OMAP1610_DMA_LCD_CTRL); + if (unlikely(!(w & (1 << 3)))) { + printk(KERN_WARNING "Spurious LCD DMA IRQ\n"); + return IRQ_NONE; + } + /* Ack the IRQ */ + w |= (1 << 3); + omap_writew(w, OMAP1610_DMA_LCD_CTRL); + lcd_dma.active = 0; + if (lcd_dma.callback != NULL) + lcd_dma.callback(w, lcd_dma.cb_data); + + return IRQ_HANDLED; +} + +int omap_request_lcd_dma(void (*callback)(u16 status, void *data), + void *data) +{ + spin_lock_irq(&lcd_dma.lock); + if (lcd_dma.reserved) { + spin_unlock_irq(&lcd_dma.lock); + printk(KERN_ERR "LCD DMA channel already reserved\n"); + BUG(); + return -EBUSY; + } + lcd_dma.reserved = 1; + spin_unlock_irq(&lcd_dma.lock); + lcd_dma.callback = callback; + lcd_dma.cb_data = data; + lcd_dma.active = 0; + lcd_dma.single_transfer = 0; + lcd_dma.rotate = 0; + lcd_dma.vxres = 0; + lcd_dma.mirror = 0; + lcd_dma.xscale = 0; + lcd_dma.yscale = 0; + lcd_dma.ext_ctrl = 0; + lcd_dma.src_port = 0; + + return 0; +} +EXPORT_SYMBOL(omap_request_lcd_dma); + +void omap_free_lcd_dma(void) +{ + spin_lock(&lcd_dma.lock); + if (!lcd_dma.reserved) { + spin_unlock(&lcd_dma.lock); + printk(KERN_ERR "LCD DMA is not reserved\n"); + BUG(); + return; + } + if (!cpu_is_omap1510()) + omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1, + OMAP1610_DMA_LCD_CCR); + lcd_dma.reserved = 0; + spin_unlock(&lcd_dma.lock); +} +EXPORT_SYMBOL(omap_free_lcd_dma); + +void omap_enable_lcd_dma(void) +{ + u16 w; + + /* + * Set the Enable bit only if an external controller is + * connected. Otherwise the OMAP internal controller will + * start the transfer when it gets enabled. + */ + if (cpu_is_omap1510() || !lcd_dma.ext_ctrl) + return; + + w = omap_readw(OMAP1610_DMA_LCD_CTRL); + w |= 1 << 8; + omap_writew(w, OMAP1610_DMA_LCD_CTRL); + + lcd_dma.active = 1; + + w = omap_readw(OMAP1610_DMA_LCD_CCR); + w |= 1 << 7; + omap_writew(w, OMAP1610_DMA_LCD_CCR); +} +EXPORT_SYMBOL(omap_enable_lcd_dma); + +void omap_setup_lcd_dma(void) +{ + BUG_ON(lcd_dma.active); + if (!cpu_is_omap1510()) { + /* Set some reasonable defaults */ + omap_writew(0x5440, OMAP1610_DMA_LCD_CCR); + omap_writew(0x9102, OMAP1610_DMA_LCD_CSDP); + omap_writew(0x0004, OMAP1610_DMA_LCD_LCH_CTRL); + } + set_b1_regs(); + if (!cpu_is_omap1510()) { + u16 w; + + w = omap_readw(OMAP1610_DMA_LCD_CCR); + /* + * If DMA was already active set the end_prog bit to have + * the programmed register set loaded into the active + * register set. + */ + w |= 1 << 11; /* End_prog */ + if (!lcd_dma.single_transfer) + w |= (3 << 8); /* Auto_init, repeat */ + omap_writew(w, OMAP1610_DMA_LCD_CCR); + } +} +EXPORT_SYMBOL(omap_setup_lcd_dma); + +void omap_stop_lcd_dma(void) +{ + u16 w; + + lcd_dma.active = 0; + if (cpu_is_omap1510() || !lcd_dma.ext_ctrl) + return; + + w = omap_readw(OMAP1610_DMA_LCD_CCR); + w &= ~(1 << 7); + omap_writew(w, OMAP1610_DMA_LCD_CCR); + + w = omap_readw(OMAP1610_DMA_LCD_CTRL); + w &= ~(1 << 8); + omap_writew(w, OMAP1610_DMA_LCD_CTRL); +} +EXPORT_SYMBOL(omap_stop_lcd_dma); + +static int __init omap_init_lcd_dma(void) +{ + int r; + + if (cpu_is_omap16xx()) { + u16 w; + + /* this would prevent OMAP sleep */ + w = omap_readw(OMAP1610_DMA_LCD_CTRL); + w &= ~(1 << 8); + omap_writew(w, OMAP1610_DMA_LCD_CTRL); + } + + spin_lock_init(&lcd_dma.lock); + + r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0, + "LCD DMA", NULL); + if (r != 0) + printk(KERN_ERR "unable to request IRQ for LCD DMA " + "(error %d)\n", r); + + return r; +} + +arch_initcall(omap_init_lcd_dma); + diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index d17375e..09d82b3 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -47,7 +47,6 @@ enum { DMA_CHAIN_STARTED, DMA_CHAIN_NOTSTARTED }; #endif #define OMAP_DMA_ACTIVE 0x01 -#define OMAP_DMA_CCR_EN (1 << 7) #define OMAP2_DMA_CSR_CLEAR_MASK 0xffe #define OMAP_FUNC_MUX_ARM_BASE (0xfffe1000 + 0xec) @@ -1120,17 +1119,8 @@ int omap_dma_running(void) { int lch; - /* - * On OMAP1510, internal LCD controller will start the transfer - * when it gets enabled, so assume DMA running if LCD enabled. - */ - if (cpu_is_omap1510()) - if (omap_readw(0xfffec000 + 0x00) & (1 << 0)) - return 1; - - /* Check if LCD DMA is running */ - if (cpu_is_omap16xx()) - if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN) + if (cpu_class_is_omap1()) + if (omap_lcd_dma_running()) return 1; for (lch = 0; lch < dma_chan_count; lch++) @@ -1990,377 +1980,6 @@ static struct irqaction omap24xx_dma_irq; /*----------------------------------------------------------------------------*/ -static struct lcd_dma_info { - spinlock_t lock; - int reserved; - void (*callback)(u16 status, void *data); - void *cb_data; - - int active; - unsigned long addr, size; - int rotate, data_type, xres, yres; - int vxres; - int mirror; - int xscale, yscale; - int ext_ctrl; - int src_port; - int single_transfer; -} lcd_dma; - -void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres, - int data_type) -{ - lcd_dma.addr = addr; - lcd_dma.data_type = data_type; - lcd_dma.xres = fb_xres; - lcd_dma.yres = fb_yres; -} -EXPORT_SYMBOL(omap_set_lcd_dma_b1); - -void omap_set_lcd_dma_src_port(int port) -{ - lcd_dma.src_port = port; -} - -void omap_set_lcd_dma_ext_controller(int external) -{ - lcd_dma.ext_ctrl = external; -} -EXPORT_SYMBOL(omap_set_lcd_dma_ext_controller); - -void omap_set_lcd_dma_single_transfer(int single) -{ - lcd_dma.single_transfer = single; -} -EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer); - -void omap_set_lcd_dma_b1_rotation(int rotate) -{ - if (omap_dma_in_1510_mode()) { - printk(KERN_ERR "DMA rotation is not supported in 1510 mode\n"); - BUG(); - return; - } - lcd_dma.rotate = rotate; -} -EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation); - -void omap_set_lcd_dma_b1_mirror(int mirror) -{ - if (omap_dma_in_1510_mode()) { - printk(KERN_ERR "DMA mirror is not supported in 1510 mode\n"); - BUG(); - } - lcd_dma.mirror = mirror; -} -EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror); - -void omap_set_lcd_dma_b1_vxres(unsigned long vxres) -{ - if (omap_dma_in_1510_mode()) { - printk(KERN_ERR "DMA virtual resulotion is not supported " - "in 1510 mode\n"); - BUG(); - } - lcd_dma.vxres = vxres; -} -EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres); - -void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale) -{ - if (omap_dma_in_1510_mode()) { - printk(KERN_ERR "DMA scale is not supported in 1510 mode\n"); - BUG(); - } - lcd_dma.xscale = xscale; - lcd_dma.yscale = yscale; -} -EXPORT_SYMBOL(omap_set_lcd_dma_b1_scale); - -static void set_b1_regs(void) -{ - unsigned long top, bottom; - int es; - u16 w; - unsigned long en, fn; - long ei, fi; - unsigned long vxres; - unsigned int xscale, yscale; - - switch (lcd_dma.data_type) { - case OMAP_DMA_DATA_TYPE_S8: - es = 1; - break; - case OMAP_DMA_DATA_TYPE_S16: - es = 2; - break; - case OMAP_DMA_DATA_TYPE_S32: - es = 4; - break; - default: - BUG(); - return; - } - - vxres = lcd_dma.vxres ? lcd_dma.vxres : lcd_dma.xres; - xscale = lcd_dma.xscale ? lcd_dma.xscale : 1; - yscale = lcd_dma.yscale ? lcd_dma.yscale : 1; - BUG_ON(vxres < lcd_dma.xres); - -#define PIXADDR(x, y) (lcd_dma.addr + \ - ((y) * vxres * yscale + (x) * xscale) * es) -#define PIXSTEP(sx, sy, dx, dy) (PIXADDR(dx, dy) - PIXADDR(sx, sy) - es + 1) - - switch (lcd_dma.rotate) { - case 0: - if (!lcd_dma.mirror) { - top = PIXADDR(0, 0); - bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); - /* 1510 DMA requires the bottom address to be 2 more - * than the actual last memory access location. */ - if (omap_dma_in_1510_mode() && - lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32) - bottom += 2; - ei = PIXSTEP(0, 0, 1, 0); - fi = PIXSTEP(lcd_dma.xres - 1, 0, 0, 1); - } else { - top = PIXADDR(lcd_dma.xres - 1, 0); - bottom = PIXADDR(0, lcd_dma.yres - 1); - ei = PIXSTEP(1, 0, 0, 0); - fi = PIXSTEP(0, 0, lcd_dma.xres - 1, 1); - } - en = lcd_dma.xres; - fn = lcd_dma.yres; - break; - case 90: - if (!lcd_dma.mirror) { - top = PIXADDR(0, lcd_dma.yres - 1); - bottom = PIXADDR(lcd_dma.xres - 1, 0); - ei = PIXSTEP(0, 1, 0, 0); - fi = PIXSTEP(0, 0, 1, lcd_dma.yres - 1); - } else { - top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); - bottom = PIXADDR(0, 0); - ei = PIXSTEP(0, 1, 0, 0); - fi = PIXSTEP(1, 0, 0, lcd_dma.yres - 1); - } - en = lcd_dma.yres; - fn = lcd_dma.xres; - break; - case 180: - if (!lcd_dma.mirror) { - top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); - bottom = PIXADDR(0, 0); - ei = PIXSTEP(1, 0, 0, 0); - fi = PIXSTEP(0, 1, lcd_dma.xres - 1, 0); - } else { - top = PIXADDR(0, lcd_dma.yres - 1); - bottom = PIXADDR(lcd_dma.xres - 1, 0); - ei = PIXSTEP(0, 0, 1, 0); - fi = PIXSTEP(lcd_dma.xres - 1, 1, 0, 0); - } - en = lcd_dma.xres; - fn = lcd_dma.yres; - break; - case 270: - if (!lcd_dma.mirror) { - top = PIXADDR(lcd_dma.xres - 1, 0); - bottom = PIXADDR(0, lcd_dma.yres - 1); - ei = PIXSTEP(0, 0, 0, 1); - fi = PIXSTEP(1, lcd_dma.yres - 1, 0, 0); - } else { - top = PIXADDR(0, 0); - bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); - ei = PIXSTEP(0, 0, 0, 1); - fi = PIXSTEP(0, lcd_dma.yres - 1, 1, 0); - } - en = lcd_dma.yres; - fn = lcd_dma.xres; - break; - default: - BUG(); - return; /* Suppress warning about uninitialized vars */ - } - - if (omap_dma_in_1510_mode()) { - omap_writew(top >> 16, OMAP1510_DMA_LCD_TOP_F1_U); - omap_writew(top, OMAP1510_DMA_LCD_TOP_F1_L); - omap_writew(bottom >> 16, OMAP1510_DMA_LCD_BOT_F1_U); - omap_writew(bottom, OMAP1510_DMA_LCD_BOT_F1_L); - - return; - } - - /* 1610 regs */ - omap_writew(top >> 16, OMAP1610_DMA_LCD_TOP_B1_U); - omap_writew(top, OMAP1610_DMA_LCD_TOP_B1_L); - omap_writew(bottom >> 16, OMAP1610_DMA_LCD_BOT_B1_U); - omap_writew(bottom, OMAP1610_DMA_LCD_BOT_B1_L); - - omap_writew(en, OMAP1610_DMA_LCD_SRC_EN_B1); - omap_writew(fn, OMAP1610_DMA_LCD_SRC_FN_B1); - - w = omap_readw(OMAP1610_DMA_LCD_CSDP); - w &= ~0x03; - w |= lcd_dma.data_type; - omap_writew(w, OMAP1610_DMA_LCD_CSDP); - - w = omap_readw(OMAP1610_DMA_LCD_CTRL); - /* Always set the source port as SDRAM for now*/ - w &= ~(0x03 << 6); - if (lcd_dma.callback != NULL) - w |= 1 << 1; /* Block interrupt enable */ - else - w &= ~(1 << 1); - omap_writew(w, OMAP1610_DMA_LCD_CTRL); - - if (!(lcd_dma.rotate || lcd_dma.mirror || - lcd_dma.vxres || lcd_dma.xscale || lcd_dma.yscale)) - return; - - w = omap_readw(OMAP1610_DMA_LCD_CCR); - /* Set the double-indexed addressing mode */ - w |= (0x03 << 12); - omap_writew(w, OMAP1610_DMA_LCD_CCR); - - omap_writew(ei, OMAP1610_DMA_LCD_SRC_EI_B1); - omap_writew(fi >> 16, OMAP1610_DMA_LCD_SRC_FI_B1_U); - omap_writew(fi, OMAP1610_DMA_LCD_SRC_FI_B1_L); -} - -static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id) -{ - u16 w; - - w = omap_readw(OMAP1610_DMA_LCD_CTRL); - if (unlikely(!(w & (1 << 3)))) { - printk(KERN_WARNING "Spurious LCD DMA IRQ\n"); - return IRQ_NONE; - } - /* Ack the IRQ */ - w |= (1 << 3); - omap_writew(w, OMAP1610_DMA_LCD_CTRL); - lcd_dma.active = 0; - if (lcd_dma.callback != NULL) - lcd_dma.callback(w, lcd_dma.cb_data); - - return IRQ_HANDLED; -} - -int omap_request_lcd_dma(void (*callback)(u16 status, void *data), - void *data) -{ - spin_lock_irq(&lcd_dma.lock); - if (lcd_dma.reserved) { - spin_unlock_irq(&lcd_dma.lock); - printk(KERN_ERR "LCD DMA channel already reserved\n"); - BUG(); - return -EBUSY; - } - lcd_dma.reserved = 1; - spin_unlock_irq(&lcd_dma.lock); - lcd_dma.callback = callback; - lcd_dma.cb_data = data; - lcd_dma.active = 0; - lcd_dma.single_transfer = 0; - lcd_dma.rotate = 0; - lcd_dma.vxres = 0; - lcd_dma.mirror = 0; - lcd_dma.xscale = 0; - lcd_dma.yscale = 0; - lcd_dma.ext_ctrl = 0; - lcd_dma.src_port = 0; - - return 0; -} -EXPORT_SYMBOL(omap_request_lcd_dma); - -void omap_free_lcd_dma(void) -{ - spin_lock(&lcd_dma.lock); - if (!lcd_dma.reserved) { - spin_unlock(&lcd_dma.lock); - printk(KERN_ERR "LCD DMA is not reserved\n"); - BUG(); - return; - } - if (!enable_1510_mode) - omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1, - OMAP1610_DMA_LCD_CCR); - lcd_dma.reserved = 0; - spin_unlock(&lcd_dma.lock); -} -EXPORT_SYMBOL(omap_free_lcd_dma); - -void omap_enable_lcd_dma(void) -{ - u16 w; - - /* - * Set the Enable bit only if an external controller is - * connected. Otherwise the OMAP internal controller will - * start the transfer when it gets enabled. - */ - if (enable_1510_mode || !lcd_dma.ext_ctrl) - return; - - w = omap_readw(OMAP1610_DMA_LCD_CTRL); - w |= 1 << 8; - omap_writew(w, OMAP1610_DMA_LCD_CTRL); - - lcd_dma.active = 1; - - w = omap_readw(OMAP1610_DMA_LCD_CCR); - w |= 1 << 7; - omap_writew(w, OMAP1610_DMA_LCD_CCR); -} -EXPORT_SYMBOL(omap_enable_lcd_dma); - -void omap_setup_lcd_dma(void) -{ - BUG_ON(lcd_dma.active); - if (!enable_1510_mode) { - /* Set some reasonable defaults */ - omap_writew(0x5440, OMAP1610_DMA_LCD_CCR); - omap_writew(0x9102, OMAP1610_DMA_LCD_CSDP); - omap_writew(0x0004, OMAP1610_DMA_LCD_LCH_CTRL); - } - set_b1_regs(); - if (!enable_1510_mode) { - u16 w; - - w = omap_readw(OMAP1610_DMA_LCD_CCR); - /* - * If DMA was already active set the end_prog bit to have - * the programmed register set loaded into the active - * register set. - */ - w |= 1 << 11; /* End_prog */ - if (!lcd_dma.single_transfer) - w |= (3 << 8); /* Auto_init, repeat */ - omap_writew(w, OMAP1610_DMA_LCD_CCR); - } -} -EXPORT_SYMBOL(omap_setup_lcd_dma); - -void omap_stop_lcd_dma(void) -{ - u16 w; - - lcd_dma.active = 0; - if (enable_1510_mode || !lcd_dma.ext_ctrl) - return; - - w = omap_readw(OMAP1610_DMA_LCD_CCR); - w &= ~(1 << 7); - omap_writew(w, OMAP1610_DMA_LCD_CCR); - - w = omap_readw(OMAP1610_DMA_LCD_CTRL); - w &= ~(1 << 8); - omap_writew(w, OMAP1610_DMA_LCD_CTRL); -} -EXPORT_SYMBOL(omap_stop_lcd_dma); - void omap_dma_global_context_save(void) { omap_dma_global_context.dma_irqenable_l0 = @@ -2465,14 +2084,6 @@ static int __init omap_init_dma(void) dma_chan_count = 16; } else dma_chan_count = 9; - if (cpu_is_omap16xx()) { - u16 w; - - /* this would prevent OMAP sleep */ - w = omap_readw(OMAP1610_DMA_LCD_CTRL); - w &= ~(1 << 8); - omap_writew(w, OMAP1610_DMA_LCD_CTRL); - } } else if (cpu_class_is_omap2()) { u8 revision = dma_read(REVISION) & 0xff; printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n", @@ -2483,7 +2094,6 @@ static int __init omap_init_dma(void) return 0; } - spin_lock_init(&lcd_dma.lock); spin_lock_init(&dma_chan_lock); for (ch = 0; ch < dma_chan_count; ch++) { @@ -2548,22 +2158,6 @@ static int __init omap_init_dma(void) } } - - /* FIXME: Update LCD DMA to work on 24xx */ - if (cpu_class_is_omap1()) { - r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0, - "LCD DMA", NULL); - if (r != 0) { - int i; - - printk(KERN_ERR "unable to request IRQ for LCD DMA " - "(error %d)\n", r); - for (i = 0; i < dma_chan_count; i++) - free_irq(omap1_dma_irq[i], (void *) (i + 1)); - goto out_free; - } - } - return 0; out_free: diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h index 1c017b2..4ede9e1 100644 --- a/arch/arm/plat-omap/include/plat/dma.h +++ b/arch/arm/plat-omap/include/plat/dma.h @@ -401,33 +401,6 @@ /*----------------------------------------------------------------------------*/ -/* Hardware registers for LCD DMA */ -#define OMAP1510_DMA_LCD_BASE (0xfffedb00) -#define OMAP1510_DMA_LCD_CTRL (OMAP1510_DMA_LCD_BASE + 0x00) -#define OMAP1510_DMA_LCD_TOP_F1_L (OMAP1510_DMA_LCD_BASE + 0x02) -#define OMAP1510_DMA_LCD_TOP_F1_U (OMAP1510_DMA_LCD_BASE + 0x04) -#define OMAP1510_DMA_LCD_BOT_F1_L (OMAP1510_DMA_LCD_BASE + 0x06) -#define OMAP1510_DMA_LCD_BOT_F1_U (OMAP1510_DMA_LCD_BASE + 0x08) - -#define OMAP1610_DMA_LCD_BASE (0xfffee300) -#define OMAP1610_DMA_LCD_CSDP (OMAP1610_DMA_LCD_BASE + 0xc0) -#define OMAP1610_DMA_LCD_CCR (OMAP1610_DMA_LCD_BASE + 0xc2) -#define OMAP1610_DMA_LCD_CTRL (OMAP1610_DMA_LCD_BASE + 0xc4) -#define OMAP1610_DMA_LCD_TOP_B1_L (OMAP1610_DMA_LCD_BASE + 0xc8) -#define OMAP1610_DMA_LCD_TOP_B1_U (OMAP1610_DMA_LCD_BASE + 0xca) -#define OMAP1610_DMA_LCD_BOT_B1_L (OMAP1610_DMA_LCD_BASE + 0xcc) -#define OMAP1610_DMA_LCD_BOT_B1_U (OMAP1610_DMA_LCD_BASE + 0xce) -#define OMAP1610_DMA_LCD_TOP_B2_L (OMAP1610_DMA_LCD_BASE + 0xd0) -#define OMAP1610_DMA_LCD_TOP_B2_U (OMAP1610_DMA_LCD_BASE + 0xd2) -#define OMAP1610_DMA_LCD_BOT_B2_L (OMAP1610_DMA_LCD_BASE + 0xd4) -#define OMAP1610_DMA_LCD_BOT_B2_U (OMAP1610_DMA_LCD_BASE + 0xd6) -#define OMAP1610_DMA_LCD_SRC_EI_B1 (OMAP1610_DMA_LCD_BASE + 0xd8) -#define OMAP1610_DMA_LCD_SRC_FI_B1_L (OMAP1610_DMA_LCD_BASE + 0xda) -#define OMAP1610_DMA_LCD_SRC_EN_B1 (OMAP1610_DMA_LCD_BASE + 0xe0) -#define OMAP1610_DMA_LCD_SRC_FN_B1 (OMAP1610_DMA_LCD_BASE + 0xe4) -#define OMAP1610_DMA_LCD_LCH_CTRL (OMAP1610_DMA_LCD_BASE + 0xea) -#define OMAP1610_DMA_LCD_SRC_FI_B1_U (OMAP1610_DMA_LCD_BASE + 0xf4) - #define OMAP1_DMA_TOUT_IRQ (1 << 0) #define OMAP_DMA_DROP_IRQ (1 << 1) #define OMAP_DMA_HALF_IRQ (1 << 2) @@ -441,6 +414,8 @@ #define OMAP2_DMA_SUPERVISOR_ERR_IRQ (1 << 10) #define OMAP2_DMA_MISALIGNED_ERR_IRQ (1 << 11) +#define OMAP_DMA_CCR_EN (1 << 7) + #define OMAP_DMA_DATA_TYPE_S8 0x00 #define OMAP_DMA_DATA_TYPE_S16 0x01 #define OMAP_DMA_DATA_TYPE_S32 0x02 @@ -503,14 +478,6 @@ #define DMA_CH_PRIO_HIGH 0x1 #define DMA_CH_PRIO_LOW 0x0 /* Def */ -/* LCD DMA block numbers */ -enum { - OMAP_LCD_DMA_B1_TOP, - OMAP_LCD_DMA_B1_BOTTOM, - OMAP_LCD_DMA_B2_TOP, - OMAP_LCD_DMA_B2_BOTTOM -}; - enum omap_dma_burst_mode { OMAP_DMA_DATA_BURST_DIS = 0, OMAP_DMA_DATA_BURST_4, @@ -661,20 +628,13 @@ extern int omap_modify_dma_chain_params(int chain_id, extern int omap_dma_chain_status(int chain_id); #endif -/* LCD DMA functions */ -extern int omap_request_lcd_dma(void (*callback)(u16 status, void *data), - void *data); -extern void omap_free_lcd_dma(void); -extern void omap_setup_lcd_dma(void); -extern void omap_enable_lcd_dma(void); -extern void omap_stop_lcd_dma(void); -extern void omap_set_lcd_dma_ext_controller(int external); -extern void omap_set_lcd_dma_single_transfer(int single); -extern void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres, - int data_type); -extern void omap_set_lcd_dma_b1_rotation(int rotate); -extern void omap_set_lcd_dma_b1_vxres(unsigned long vxres); -extern void omap_set_lcd_dma_b1_mirror(int mirror); -extern void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale); +#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_FB_OMAP) +#include +#else +static inline int omap_lcd_dma_running(void) +{ + return 0; +} +#endif #endif /* __ASM_ARCH_DMA_H */ -- cgit v0.10.2 From 106997c1a4aa3a34d8e04fa0138ba332f7ceafef Mon Sep 17 00:00:00 2001 From: Cory Maccarrone Date: Fri, 11 Dec 2009 16:16:34 -0800 Subject: omap1: Add omap7xx USB support This change implements USB client side support into the HTC Herald board configuration. It uses a similar, but updated algorithm to initialize the USB as is used in the linwizard project. Signed-off-by: Cory Maccarrone Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index 5f28a5c..e36639f 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -39,6 +39,7 @@ #include #include #include +#include #include @@ -140,6 +141,15 @@ static struct platform_device kp_device = { .resource = kp_resources, }; +/* USB Device */ +static struct omap_usb_config htcherald_usb_config __initdata = { + .otg = 0, + .register_host = 0, + .register_dev = 1, + .hmc_mode = 4, + .pins[0] = 2, +}; + /* LCD Device resources */ static struct platform_device lcd_device = { .name = "lcd_htcherald", @@ -214,6 +224,57 @@ static void __init htcherald_disable_watchdog(void) } } +#define HTCHERALD_GPIO_USB_EN1 33 +#define HTCHERALD_GPIO_USB_EN2 73 +#define HTCHERALD_GPIO_USB_DM 35 +#define HTCHERALD_GPIO_USB_DP 36 + +static void __init htcherald_usb_enable(void) +{ + unsigned int tries = 20; + unsigned int value = 0; + + /* Request the GPIOs we need to control here */ + if (gpio_request(HTCHERALD_GPIO_USB_EN1, "herald_usb") < 0) + goto err1; + + if (gpio_request(HTCHERALD_GPIO_USB_EN2, "herald_usb") < 0) + goto err2; + + if (gpio_request(HTCHERALD_GPIO_USB_DM, "herald_usb") < 0) + goto err3; + + if (gpio_request(HTCHERALD_GPIO_USB_DP, "herald_usb") < 0) + goto err4; + + /* force USB_EN GPIO to 0 */ + do { + /* output low */ + gpio_direction_output(HTCHERALD_GPIO_USB_EN1, 0); + } while ((value = gpio_get_value(HTCHERALD_GPIO_USB_EN1)) == 1 && + --tries); + + if (value == 1) + printk(KERN_WARNING "Unable to reset USB, trying to continue\n"); + + gpio_direction_output(HTCHERALD_GPIO_USB_EN2, 0); /* output low */ + gpio_direction_input(HTCHERALD_GPIO_USB_DM); /* input */ + gpio_direction_input(HTCHERALD_GPIO_USB_DP); /* input */ + + goto done; + +err4: + gpio_free(HTCHERALD_GPIO_USB_DM); +err3: + gpio_free(HTCHERALD_GPIO_USB_EN2); +err2: + gpio_free(HTCHERALD_GPIO_USB_EN1); +err1: + printk(KERN_ERR "Unabled to request GPIO for USB\n"); +done: + printk(KERN_INFO "USB setup complete.\n"); +} + static void __init htcherald_init(void) { printk(KERN_INFO "HTC Herald init.\n"); @@ -225,6 +286,9 @@ static void __init htcherald_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); htcherald_disable_watchdog(); + + htcherald_usb_enable(); + omap_usb_init(&htcherald_usb_config); } static void __init htcherald_init_irq(void) diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c index 785371e..5e183cd 100644 --- a/arch/arm/mach-omap1/mux.c +++ b/arch/arm/mach-omap1/mux.c @@ -50,7 +50,9 @@ MUX_CFG_7XX("E3_7XX_KBC4", 13, 25, 0, 24, 1, 0) MUX_CFG_7XX("AA17_7XX_USB_DM", 2, 21, 0, 20, 0, 0) MUX_CFG_7XX("W16_7XX_USB_PU_EN", 2, 25, 0, 24, 0, 0) -MUX_CFG_7XX("W17_7XX_USB_VBUSI", 2, 29, 0, 28, 0, 0) +MUX_CFG_7XX("W17_7XX_USB_VBUSI", 2, 29, 6, 28, 1, 0) +MUX_CFG_7XX("W18_7XX_USB_DMCK_OUT",3, 3, 1, 2, 0, 0) +MUX_CFG_7XX("W19_7XX_USB_DCRST", 3, 7, 1, 6, 0, 0) /* MMC Pins */ MUX_CFG_7XX("MMC_7XX_CMD", 2, 9, 0, 8, 1, 0) diff --git a/arch/arm/plat-omap/include/plat/mux.h b/arch/arm/plat-omap/include/plat/mux.h index 6067cf7..8ed5f25 100644 --- a/arch/arm/plat-omap/include/plat/mux.h +++ b/arch/arm/plat-omap/include/plat/mux.h @@ -172,6 +172,8 @@ enum omap7xx_index { AA17_7XX_USB_DM, W16_7XX_USB_PU_EN, W17_7XX_USB_VBUSI, + W18_7XX_USB_DMCK_OUT, + W19_7XX_USB_DCRST, /* MMC */ MMC_7XX_CMD, diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c index 51033a4..d3bf17c 100644 --- a/arch/arm/plat-omap/usb.c +++ b/arch/arm/plat-omap/usb.c @@ -137,7 +137,13 @@ static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device) if (is_device) { if (cpu_is_omap24xx()) omap_cfg_reg(J20_24XX_USB0_PUEN); - else + else if (cpu_is_omap7xx()) { + omap_cfg_reg(AA17_7XX_USB_DM); + omap_cfg_reg(W16_7XX_USB_PU_EN); + omap_cfg_reg(W17_7XX_USB_VBUSI); + omap_cfg_reg(W18_7XX_USB_DMCK_OUT); + omap_cfg_reg(W19_7XX_USB_DCRST); + } else omap_cfg_reg(W4_USB_PUEN); } -- cgit v0.10.2 From bf92a40762fb10a394281941a46f529463c49ffc Mon Sep 17 00:00:00 2001 From: Cory Maccarrone Date: Fri, 11 Dec 2009 16:16:34 -0800 Subject: omap1: I2C mux and clocks for omap7xx This change adds MUX pin configuration and clocks for I2C support to OMAP 730 and 850-based devices. Signed-off-by: Cory Maccarrone Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index cf5f017..ab995a9 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -655,9 +655,9 @@ static struct omap_clk omap_clks[] = { CLK("mmci-omap.1", "ick", &armper_ck.clk, CK_16XX), /* Virtual clocks */ CLK(NULL, "mpu", &virtual_ck_mpu, CK_16XX | CK_1510 | CK_310), - CLK("i2c_omap.1", "fck", &i2c_fck, CK_16XX | CK_1510 | CK_310), + CLK("i2c_omap.1", "fck", &i2c_fck, CK_16XX | CK_1510 | CK_310 | CK_7XX), CLK("i2c_omap.1", "ick", &i2c_ick, CK_16XX), - CLK("i2c_omap.1", "ick", &dummy_ck, CK_1510 | CK_310), + CLK("i2c_omap.1", "ick", &dummy_ck, CK_1510 | CK_310 | CK_7XX), CLK("omap_uwire", "fck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310), CLK("omap-mcbsp.1", "ick", &dspper_ck, CK_16XX), CLK("omap-mcbsp.1", "ick", &dummy_ck, CK_1510 | CK_310), diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c index bc9d12b..1bf4735 100644 --- a/arch/arm/mach-omap1/i2c.c +++ b/arch/arm/mach-omap1/i2c.c @@ -21,13 +21,19 @@ #include #include +#include int __init omap_register_i2c_bus(int bus_id, u32 clkrate, struct i2c_board_info const *info, unsigned len) { - omap_cfg_reg(I2C_SDA); - omap_cfg_reg(I2C_SCL); + if (cpu_is_omap7xx()) { + omap_cfg_reg(I2C_7XX_SDA); + omap_cfg_reg(I2C_7XX_SCL); + } else { + omap_cfg_reg(I2C_SDA); + omap_cfg_reg(I2C_SCL); + } return omap_plat_register_i2c_bus(bus_id, clkrate, info, len); } diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c index 5e183cd..07212cc 100644 --- a/arch/arm/mach-omap1/mux.c +++ b/arch/arm/mach-omap1/mux.c @@ -58,6 +58,10 @@ MUX_CFG_7XX("W19_7XX_USB_DCRST", 3, 7, 1, 6, 0, 0) MUX_CFG_7XX("MMC_7XX_CMD", 2, 9, 0, 8, 1, 0) MUX_CFG_7XX("MMC_7XX_CLK", 2, 13, 0, 12, 1, 0) MUX_CFG_7XX("MMC_7XX_DAT0", 2, 17, 0, 16, 1, 0) + +/* I2C interface */ +MUX_CFG_7XX("I2C_7XX_SCL", 5, 1, 0, 0, 1, 0) +MUX_CFG_7XX("I2C_7XX_SDA", 5, 5, 0, 0, 1, 0) }; #define OMAP7XX_PINS_SZ ARRAY_SIZE(omap7xx_pins) #else diff --git a/arch/arm/plat-omap/include/plat/mux.h b/arch/arm/plat-omap/include/plat/mux.h index 8ed5f25..8f069cc 100644 --- a/arch/arm/plat-omap/include/plat/mux.h +++ b/arch/arm/plat-omap/include/plat/mux.h @@ -179,6 +179,10 @@ enum omap7xx_index { MMC_7XX_CMD, MMC_7XX_CLK, MMC_7XX_DAT0, + + /* I2C */ + I2C_7XX_SCL, + I2C_7XX_SDA, }; enum omap1xxx_index { -- cgit v0.10.2 From 7a079cab4632265fc87ee483daf57879d5dd87f2 Mon Sep 17 00:00:00 2001 From: Gregoire Gentil Date: Fri, 11 Dec 2009 16:16:34 -0800 Subject: omap3: Board file of Always Innovating OMAP3-based Touch Book Board file of Always Innovating OMAP3-based Touch Book Signed-off-by: Gregoire Gentil Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 5a74e14..06dc64d 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -90,6 +90,11 @@ config MACH_OMAP3_PANDORA depends on ARCH_OMAP3 && ARCH_OMAP34XX select OMAP_PACKAGE_CBB +config MACH_OMAP3_TOUCHBOOK + bool "OMAP3 Touch Book" + depends on ARCH_OMAP3 && ARCH_OMAP34XX + select BACKLIGHT_CLASS_DEVICE + config MACH_OMAP_3430SDP bool "OMAP 3430 SDP board" depends on ARCH_OMAP3 && ARCH_OMAP34XX diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index e30e335..b32678b 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -105,7 +105,8 @@ obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o \ mmc-twl4030.o obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o \ mmc-twl4030.o - +obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o \ + mmc-twl4030.o obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c new file mode 100644 index 0000000..c9e5ebb --- /dev/null +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -0,0 +1,572 @@ +/* + * linux/arch/arm/mach-omap2/board-omap3touchbook.c + * + * Copyright (C) 2009 Always Innovating + * + * Modified from mach-omap2/board-omap3beagleboard.c + * + * Initial code: Grégoire Gentil, Tim Yamin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include + +#include + +#include +#include + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include "mux.h" +#include "mmc-twl4030.h" + +#include + +#define GPMC_CS0_BASE 0x60 +#define GPMC_CS_SIZE 0x30 + +#define NAND_BLOCK_SIZE SZ_128K + +#define OMAP3_AC_GPIO 136 +#define OMAP3_TS_GPIO 162 +#define TB_BL_PWM_TIMER 9 +#define TB_KILL_POWER_GPIO 168 + +unsigned long touchbook_revision; + +static struct mtd_partition omap3touchbook_nand_partitions[] = { + /* All the partition sizes are listed in terms of NAND block size */ + { + .name = "X-Loader", + .offset = 0, + .size = 4 * NAND_BLOCK_SIZE, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + { + .name = "U-Boot", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ + .size = 15 * NAND_BLOCK_SIZE, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + { + .name = "U-Boot Env", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */ + .size = 1 * NAND_BLOCK_SIZE, + }, + { + .name = "Kernel", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */ + .size = 32 * NAND_BLOCK_SIZE, + }, + { + .name = "File System", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */ + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct omap_nand_platform_data omap3touchbook_nand_data = { + .options = NAND_BUSWIDTH_16, + .parts = omap3touchbook_nand_partitions, + .nr_parts = ARRAY_SIZE(omap3touchbook_nand_partitions), + .dma_channel = -1, /* disable DMA in OMAP NAND driver */ + .nand_setup = NULL, + .dev_ready = NULL, +}; + +static struct resource omap3touchbook_nand_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device omap3touchbook_nand_device = { + .name = "omap2-nand", + .id = -1, + .dev = { + .platform_data = &omap3touchbook_nand_data, + }, + .num_resources = 1, + .resource = &omap3touchbook_nand_resource, +}; + +#include "sdram-micron-mt46h32m32lf-6.h" + +static struct twl4030_hsmmc_info mmc[] = { + { + .mmc = 1, + .wires = 8, + .gpio_wp = 29, + }, + {} /* Terminator */ +}; + +static struct platform_device omap3_touchbook_lcd_device = { + .name = "omap3touchbook_lcd", + .id = -1, +}; + +static struct omap_lcd_config omap3_touchbook_lcd_config __initdata = { + .ctrl_name = "internal", +}; + +static struct regulator_consumer_supply touchbook_vmmc1_supply = { + .supply = "vmmc", +}; + +static struct regulator_consumer_supply touchbook_vsim_supply = { + .supply = "vmmc_aux", +}; + +static struct gpio_led gpio_leds[]; + +static int touchbook_twl_gpio_setup(struct device *dev, + unsigned gpio, unsigned ngpio) +{ + if (system_rev >= 0x20 && system_rev <= 0x34301000) { + omap_mux_init_gpio(23, OMAP_PIN_INPUT); + mmc[0].gpio_wp = 23; + } else { + omap_mux_init_gpio(29, OMAP_PIN_INPUT); + } + /* gpio + 0 is "mmc0_cd" (input/IRQ) */ + mmc[0].gpio_cd = gpio + 0; + twl4030_mmc_init(mmc); + + /* link regulators to MMC adapters */ + touchbook_vmmc1_supply.dev = mmc[0].dev; + touchbook_vsim_supply.dev = mmc[0].dev; + + /* REVISIT: need ehci-omap hooks for external VBUS + * power switch and overcurrent detect + */ + + gpio_request(gpio + 1, "EHCI_nOC"); + gpio_direction_input(gpio + 1); + + /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */ + gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR"); + gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0); + + /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ + gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; + + return 0; +} + +static struct twl4030_gpio_platform_data touchbook_gpio_data = { + .gpio_base = OMAP_MAX_GPIO_LINES, + .irq_base = TWL4030_GPIO_IRQ_BASE, + .irq_end = TWL4030_GPIO_IRQ_END, + .use_leds = true, + .pullups = BIT(1), + .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13) + | BIT(15) | BIT(16) | BIT(17), + .setup = touchbook_twl_gpio_setup, +}; + +static struct regulator_consumer_supply touchbook_vdac_supply = { + .supply = "vdac", + .dev = &omap3_touchbook_lcd_device.dev, +}; + +static struct regulator_consumer_supply touchbook_vdvi_supply = { + .supply = "vdvi", + .dev = &omap3_touchbook_lcd_device.dev, +}; + +/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ +static struct regulator_init_data touchbook_vmmc1 = { + .constraints = { + .min_uV = 1850000, + .max_uV = 3150000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &touchbook_vmmc1_supply, +}; + +/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ +static struct regulator_init_data touchbook_vsim = { + .constraints = { + .min_uV = 1800000, + .max_uV = 3000000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &touchbook_vsim_supply, +}; + +/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ +static struct regulator_init_data touchbook_vdac = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &touchbook_vdac_supply, +}; + +/* VPLL2 for digital video outputs */ +static struct regulator_init_data touchbook_vpll2 = { + .constraints = { + .name = "VDVI", + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &touchbook_vdvi_supply, +}; + +static struct twl4030_usb_data touchbook_usb_data = { + .usb_mode = T2_USB_MODE_ULPI, +}; + +static struct twl4030_codec_audio_data touchbook_audio_data = { + .audio_mclk = 26000000, +}; + +static struct twl4030_codec_data touchbook_codec_data = { + .audio_mclk = 26000000, + .audio = &touchbook_audio_data, +}; + +static struct twl4030_platform_data touchbook_twldata = { + .irq_base = TWL4030_IRQ_BASE, + .irq_end = TWL4030_IRQ_END, + + /* platform_data for children goes here */ + .usb = &touchbook_usb_data, + .gpio = &touchbook_gpio_data, + .codec = &touchbook_codec_data, + .vmmc1 = &touchbook_vmmc1, + .vsim = &touchbook_vsim, + .vdac = &touchbook_vdac, + .vpll2 = &touchbook_vpll2, +}; + +static struct i2c_board_info __initdata touchbook_i2c_boardinfo[] = { + { + I2C_BOARD_INFO("twl4030", 0x48), + .flags = I2C_CLIENT_WAKE, + .irq = INT_34XX_SYS_NIRQ, + .platform_data = &touchbook_twldata, + }, +}; + +static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = { + { + I2C_BOARD_INFO("bq27200", 0x55), + }, +}; + +static int __init omap3_touchbook_i2c_init(void) +{ + /* Standard TouchBook bus */ + omap_register_i2c_bus(1, 2600, touchbook_i2c_boardinfo, + ARRAY_SIZE(touchbook_i2c_boardinfo)); + + /* Additional TouchBook bus */ + omap_register_i2c_bus(3, 100, touchBook_i2c_boardinfo, + ARRAY_SIZE(touchBook_i2c_boardinfo)); + + return 0; +} + +static void __init omap3_ads7846_init(void) +{ + if (gpio_request(OMAP3_TS_GPIO, "ads7846_pen_down")) { + printk(KERN_ERR "Failed to request GPIO %d for " + "ads7846 pen down IRQ\n", OMAP3_TS_GPIO); + return; + } + + gpio_direction_input(OMAP3_TS_GPIO); + omap_set_gpio_debounce(OMAP3_TS_GPIO, 1); + omap_set_gpio_debounce_time(OMAP3_TS_GPIO, 0xa); +} + +static struct ads7846_platform_data ads7846_config = { + .x_min = 100, + .y_min = 265, + .x_max = 3950, + .y_max = 3750, + .x_plate_ohms = 40, + .pressure_max = 255, + .debounce_max = 10, + .debounce_tol = 5, + .debounce_rep = 1, + .gpio_pendown = OMAP3_TS_GPIO, + .keep_vref_on = 1, +}; + +static struct omap2_mcspi_device_config ads7846_mcspi_config = { + .turbo_mode = 0, + .single_channel = 1, /* 0: slave, 1: master */ +}; + +static struct spi_board_info omap3_ads7846_spi_board_info[] __initdata = { + { + .modalias = "ads7846", + .bus_num = 4, + .chip_select = 0, + .max_speed_hz = 1500000, + .controller_data = &ads7846_mcspi_config, + .irq = OMAP_GPIO_IRQ(OMAP3_TS_GPIO), + .platform_data = &ads7846_config, + } +}; + +static struct gpio_led gpio_leds[] = { + { + .name = "touchbook::usr0", + .default_trigger = "heartbeat", + .gpio = 150, + }, + { + .name = "touchbook::usr1", + .default_trigger = "mmc0", + .gpio = 149, + }, + { + .name = "touchbook::pmu_stat", + .gpio = -EINVAL, /* gets replaced */ + .active_low = true, + }, +}; + +static struct gpio_led_platform_data gpio_led_info = { + .leds = gpio_leds, + .num_leds = ARRAY_SIZE(gpio_leds), +}; + +static struct platform_device leds_gpio = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &gpio_led_info, + }, +}; + +static struct gpio_keys_button gpio_buttons[] = { + { + .code = BTN_EXTRA, + .gpio = 7, + .desc = "user", + .wakeup = 1, + }, + { + .code = KEY_POWER, + .gpio = 183, + .desc = "power", + .wakeup = 1, + }, +}; + +static struct gpio_keys_platform_data gpio_key_info = { + .buttons = gpio_buttons, + .nbuttons = ARRAY_SIZE(gpio_buttons), +}; + +static struct platform_device keys_gpio = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &gpio_key_info, + }, +}; + +static struct omap_board_config_kernel omap3_touchbook_config[] __initdata = { + { OMAP_TAG_LCD, &omap3_touchbook_lcd_config }, +}; + +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + +static void __init omap3_touchbook_init_irq(void) +{ + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); + omap_board_config = omap3_touchbook_config; + omap_board_config_size = ARRAY_SIZE(omap3_touchbook_config); + omap2_init_common_hw(mt46h32m32lf6_sdrc_params, + mt46h32m32lf6_sdrc_params); + omap_init_irq(); +#ifdef CONFIG_OMAP_32K_TIMER + omap2_gp_clockevent_set_gptimer(12); +#endif + omap_gpio_init(); +} + +static struct platform_device *omap3_touchbook_devices[] __initdata = { + &omap3_touchbook_lcd_device, + &leds_gpio, + &keys_gpio, +}; + +static void __init omap3touchbook_flash_init(void) +{ + u8 cs = 0; + u8 nandcs = GPMC_CS_NUM + 1; + + u32 gpmc_base_add = OMAP34XX_GPMC_VIRT; + + /* find out the chip-select on which NAND exists */ + while (cs < GPMC_CS_NUM) { + u32 ret = 0; + ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); + + if ((ret & 0xC00) == 0x800) { + printk(KERN_INFO "Found NAND on CS%d\n", cs); + if (nandcs > GPMC_CS_NUM) + nandcs = cs; + } + cs++; + } + + if (nandcs > GPMC_CS_NUM) { + printk(KERN_INFO "NAND: Unable to find configuration " + "in GPMC\n "); + return; + } + + if (nandcs < GPMC_CS_NUM) { + omap3touchbook_nand_data.cs = nandcs; + omap3touchbook_nand_data.gpmc_cs_baseaddr = (void *) + (gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE); + omap3touchbook_nand_data.gpmc_baseaddr = + (void *) (gpmc_base_add); + + printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); + if (platform_device_register(&omap3touchbook_nand_device) < 0) + printk(KERN_ERR "Unable to register NAND device\n"); + } +} + +static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { + + .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + + .phy_reset = true, + .reset_gpio_port[0] = -EINVAL, + .reset_gpio_port[1] = 147, + .reset_gpio_port[2] = -EINVAL +}; + +static void omap3_touchbook_poweroff(void) +{ + int r; + + r = gpio_request(TB_KILL_POWER_GPIO, "DVI reset"); + if (r < 0) { + printk(KERN_ERR "Unable to get kill power GPIO\n"); + return; + } + + gpio_direction_output(TB_KILL_POWER_GPIO, 0); +} + +static void __init early_touchbook_revision(char **p) +{ + if (!*p) + return; + + strict_strtoul(*p, 10, &touchbook_revision); +} +__early_param("tbr=", early_touchbook_revision); + +static void __init omap3_touchbook_init(void) +{ + pm_power_off = omap3_touchbook_poweroff; + + omap3_touchbook_i2c_init(); + platform_add_devices(omap3_touchbook_devices, + ARRAY_SIZE(omap3_touchbook_devices)); + omap_serial_init(); + + omap_mux_init_gpio(170, OMAP_PIN_INPUT); + gpio_request(176, "DVI_nPD"); + /* REVISIT leave DVI powered down until it's needed ... */ + gpio_direction_output(176, true); + + /* Touchscreen and accelerometer */ + spi_register_board_info(omap3_ads7846_spi_board_info, + ARRAY_SIZE(omap3_ads7846_spi_board_info)); + omap3_ads7846_init(); + usb_musb_init(); + usb_ehci_init(&ehci_pdata); + omap3touchbook_flash_init(); + + /* Ensure SDRC pins are mux'd for self-refresh */ + omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); + omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); +} + +static void __init omap3_touchbook_map_io(void) +{ + omap2_set_globals_343x(); + omap2_map_common_io(); +} + +MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board") + /* Maintainer: Gregoire Gentil - http://www.alwaysinnovating.com */ + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap3_touchbook_map_io, + .init_irq = omap3_touchbook_init_irq, + .init_machine = omap3_touchbook_init, + .timer = &omap_timer, +MACHINE_END -- cgit v0.10.2 From 249b17f23a0fd141390d20fae4c96951e2054b5a Mon Sep 17 00:00:00 2001 From: Gregoire Gentil Date: Fri, 11 Dec 2009 16:16:34 -0800 Subject: omap3: Defconfig file of Always Innovating OMAP3-based Touch Book Defconfig file of Always Innovating OMAP3-based Touch Book Signed-off-by: Gregoire Gentil Signed-off-by: Tony Lindgren diff --git a/arch/arm/configs/omap3_touchbook_defconfig b/arch/arm/configs/omap3_touchbook_defconfig new file mode 100644 index 0000000..7c8515e --- /dev/null +++ b/arch/arm/configs/omap3_touchbook_defconfig @@ -0,0 +1,2431 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.32-rc8 +# Fri Dec 4 16:02:17 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_ARCH_HAS_CPUFREQ=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_OPROFILE_ARMV7=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=15 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_ELF_CORE is not set +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_COMPAT_BRK is not set +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +CONFIG_SLOW_WORK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_FREEZER=y + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_BCMRING is not set + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +# CONFIG_ARCH_OMAP1 is not set +# CONFIG_ARCH_OMAP2 is not set +CONFIG_ARCH_OMAP3=y +# CONFIG_ARCH_OMAP4 is not set + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set +# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set +CONFIG_OMAP_RESET_CLOCKS=y +# CONFIG_OMAP_MUX is not set +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MBOX_FWK is not set +# CONFIG_OMAP_MPU_TIMER is not set +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_32K_TIMER_HZ=128 +CONFIG_OMAP_DM_TIMER=y +# CONFIG_OMAP_LL_DEBUG_UART1 is not set +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +CONFIG_OMAP_LL_DEBUG_UART3=y +# CONFIG_OMAP_LL_DEBUG_NONE is not set +# CONFIG_OMAP_PM_NONE is not set +CONFIG_OMAP_PM_NOOP=y +CONFIG_ARCH_OMAP34XX=y +CONFIG_ARCH_OMAP3430=y + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP3_BEAGLE is not set +# CONFIG_MACH_OMAP_LDP is not set +# CONFIG_MACH_OVERO is not set +# CONFIG_MACH_OMAP3EVM is not set +# CONFIG_MACH_OMAP3517EVM is not set +# CONFIG_MACH_OMAP3_PANDORA is not set +CONFIG_MACH_OMAP3_TOUCHBOOK=y +# CONFIG_MACH_OMAP_3430SDP is not set +# CONFIG_MACH_NOKIA_RX51 is not set +# CONFIG_MACH_OMAP_ZOOM2 is not set +# CONFIG_MACH_OMAP_ZOOM3 is not set +# CONFIG_MACH_CM_T35 is not set +# CONFIG_MACH_IGEP0020 is not set +# CONFIG_MACH_OMAP_3630SDP is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_V7=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +CONFIG_ARM_THUMBEE=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +CONFIG_ARM_L1_CACHE_SHIFT=6 +# CONFIG_ARM_ERRATA_430973 is not set +# CONFIG_ARM_ERRATA_458693 is not set +# CONFIG_ARM_ERRATA_460075 is not set +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_HZ=128 +# CONFIG_THUMB2_KERNEL is not set +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_LEDS=y +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE=" debug " +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y + +# +# CPU Power Management +# +# CONFIG_CPU_FREQ is not set +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_NEON=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_HAVE_AOUT=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +CONFIG_PM=y +CONFIG_PM_DEBUG=y +# CONFIG_PM_VERBOSE is not set +CONFIG_CAN_PM_TRACE=y +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +# CONFIG_PM_TEST_SUSPEND is not set +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set +# CONFIG_PM_RUNTIME is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE=m +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_LRO=y +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +CONFIG_TCP_CONG_ADVANCED=y +CONFIG_TCP_CONG_BIC=m +CONFIG_TCP_CONG_CUBIC=y +CONFIG_TCP_CONG_WESTWOOD=m +CONFIG_TCP_CONG_HTCP=m +CONFIG_TCP_CONG_HSTCP=m +CONFIG_TCP_CONG_HYBLA=m +CONFIG_TCP_CONG_VEGAS=m +CONFIG_TCP_CONG_SCALABLE=m +CONFIG_TCP_CONG_LP=m +CONFIG_TCP_CONG_VENO=m +CONFIG_TCP_CONG_YEAH=m +CONFIG_TCP_CONG_ILLINOIS=m +# CONFIG_DEFAULT_BIC is not set +CONFIG_DEFAULT_CUBIC=y +# CONFIG_DEFAULT_HTCP is not set +# CONFIG_DEFAULT_VEGAS is not set +# CONFIG_DEFAULT_WESTWOOD is not set +# CONFIG_DEFAULT_RENO is not set +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_MIP6=m +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y +CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_IPV6_SUBTREES=y +CONFIG_IPV6_MROUTE=y +# CONFIG_IPV6_PIMSM_V2 is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y +CONFIG_BRIDGE_NETFILTER=y + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CT_PROTO_DCCP=m +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m +# CONFIG_NETFILTER_TPROXY is not set +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +CONFIG_NETFILTER_XT_TARGET_HL=m +# CONFIG_NETFILTER_XT_TARGET_LED is not set +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set +CONFIG_NETFILTER_XT_TARGET_RATEEST=m +# CONFIG_NETFILTER_XT_TARGET_TRACE is not set +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set +# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +# CONFIG_NETFILTER_XT_MATCH_OSF is not set +CONFIG_IP_VS=m +CONFIG_IP_VS_IPV6=y +CONFIG_IP_VS_DEBUG=y +CONFIG_IP_VS_TAB_BITS=12 + +# +# IPVS transport protocol load balancing support +# +CONFIG_IP_VS_PROTO_TCP=y +CONFIG_IP_VS_PROTO_UDP=y +CONFIG_IP_VS_PROTO_AH_ESP=y +CONFIG_IP_VS_PROTO_ESP=y +CONFIG_IP_VS_PROTO_AH=y + +# +# IPVS scheduler +# +CONFIG_IP_VS_RR=m +CONFIG_IP_VS_WRR=m +CONFIG_IP_VS_LC=m +CONFIG_IP_VS_WLC=m +CONFIG_IP_VS_LBLC=m +CONFIG_IP_VS_LBLCR=m +CONFIG_IP_VS_DH=m +CONFIG_IP_VS_SH=m +CONFIG_IP_VS_SED=m +CONFIG_IP_VS_NQ=m + +# +# IPVS application helper +# +CONFIG_IP_VS_FTP=m + +# +# IP: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV4=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_DCCP=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_PROTO_UDPLITE=m +CONFIG_NF_NAT_PROTO_SCTP=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV6=m +CONFIG_IP6_NF_QUEUE=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m +CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_RAW=m +# CONFIG_BRIDGE_NF_EBTABLES is not set +CONFIG_IP_DCCP=m +CONFIG_INET_DCCP_DIAG=m + +# +# DCCP CCIDs Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP_CCID2_DEBUG is not set +CONFIG_IP_DCCP_CCID3=y +# CONFIG_IP_DCCP_CCID3_DEBUG is not set +CONFIG_IP_DCCP_CCID3_RTO=100 +CONFIG_IP_DCCP_TFRC_LIB=y + +# +# DCCP Kernel Hacking +# +# CONFIG_IP_DCCP_DEBUG is not set +CONFIG_IP_SCTP=m +# CONFIG_SCTP_DBG_MSG is not set +# CONFIG_SCTP_DBG_OBJCNT is not set +# CONFIG_SCTP_HMAC_NONE is not set +# CONFIG_SCTP_HMAC_SHA1 is not set +CONFIG_SCTP_HMAC_MD5=y +# CONFIG_RDS is not set +CONFIG_TIPC=m +# CONFIG_TIPC_ADVANCED is not set +# CONFIG_TIPC_DEBUG is not set +CONFIG_ATM=m +CONFIG_ATM_CLIP=m +# CONFIG_ATM_CLIP_NO_ICMP is not set +CONFIG_ATM_LANE=m +CONFIG_ATM_MPOA=m +CONFIG_ATM_BR2684=m +# CONFIG_ATM_BR2684_IPFILTER is not set +CONFIG_STP=m +CONFIG_GARP=m +CONFIG_BRIDGE=m +# CONFIG_NET_DSA is not set +CONFIG_VLAN_8021Q=m +CONFIG_VLAN_8021Q_GVRP=y +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +CONFIG_WAN_ROUTER=m +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +CONFIG_NET_SCH_CBQ=m +CONFIG_NET_SCH_HTB=m +CONFIG_NET_SCH_HFSC=m +CONFIG_NET_SCH_ATM=m +CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_MULTIQ=m +CONFIG_NET_SCH_RED=m +CONFIG_NET_SCH_SFQ=m +CONFIG_NET_SCH_TEQL=m +CONFIG_NET_SCH_TBF=m +CONFIG_NET_SCH_GRED=m +CONFIG_NET_SCH_DSMARK=m +CONFIG_NET_SCH_NETEM=m +CONFIG_NET_SCH_DRR=m + +# +# Classification +# +CONFIG_NET_CLS=y +CONFIG_NET_CLS_BASIC=m +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_CLS_ROUTE4=m +CONFIG_NET_CLS_ROUTE=y +CONFIG_NET_CLS_FW=m +CONFIG_NET_CLS_U32=m +CONFIG_CLS_U32_PERF=y +CONFIG_CLS_U32_MARK=y +CONFIG_NET_CLS_RSVP=m +CONFIG_NET_CLS_RSVP6=m +CONFIG_NET_CLS_FLOW=m +# CONFIG_NET_EMATCH is not set +# CONFIG_NET_CLS_ACT is not set +CONFIG_NET_CLS_IND=y +CONFIG_NET_SCH_FIFO=y +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NET_DROP_MONITOR is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +CONFIG_BT=y +CONFIG_BT_L2CAP=y +CONFIG_BT_SCO=y +CONFIG_BT_RFCOMM=y +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=y +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=y + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIBTUSB=y +CONFIG_BT_HCIBTSDIO=y +CONFIG_BT_HCIUART=y +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +CONFIG_BT_HCIUART_LL=y +CONFIG_BT_HCIBCM203X=y +CONFIG_BT_HCIBPA10X=y +CONFIG_BT_HCIBFUSB=y +# CONFIG_BT_HCIVHCI is not set +# CONFIG_BT_MRVL is not set +CONFIG_AF_RXRPC=m +# CONFIG_AF_RXRPC_DEBUG is not set +# CONFIG_RXKAD is not set +CONFIG_FIB_RULES=y +CONFIG_WIRELESS=y +CONFIG_CFG80211=m +# CONFIG_NL80211_TESTMODE is not set +# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set +# CONFIG_CFG80211_REG_DEBUG is not set +CONFIG_CFG80211_DEFAULT_PS=y +CONFIG_CFG80211_DEFAULT_PS_VALUE=1 +# CONFIG_CFG80211_DEBUGFS is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +CONFIG_LIB80211=y +# CONFIG_LIB80211_DEBUG is not set +CONFIG_MAC80211=m +CONFIG_MAC80211_RC_PID=y +# CONFIG_MAC80211_RC_MINSTREL is not set +CONFIG_MAC80211_RC_DEFAULT_PID=y +# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set +CONFIG_MAC80211_RC_DEFAULT="pid" +# CONFIG_MAC80211_MESH is not set +# CONFIG_MAC80211_LEDS is not set +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +CONFIG_WIMAX=m +CONFIG_WIMAX_DEBUG_LEVEL=8 +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_OMAP2=y +CONFIG_MTD_NAND_OMAP_PREFETCH=y +# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +CONFIG_MTD_NAND_PLATFORM=y +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +# CONFIG_MTD_UBI_GLUEBI is not set + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=m +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +CONFIG_EEPROM_93CX6=y +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +CONFIG_RAID_ATTRS=m +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=y +CONFIG_CHR_DEV_SCH=m +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=m +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +CONFIG_ISCSI_TCP=m +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +CONFIG_MD_RAID10=m +CONFIG_MD_RAID456=m +CONFIG_MD_RAID6_PQ=m +# CONFIG_ASYNC_RAID6_TEST is not set +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_DEBUG is not set +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +# CONFIG_DM_LOG_USERSPACE is not set +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +# CONFIG_DM_MULTIPATH_QL is not set +# CONFIG_DM_MULTIPATH_ST is not set +CONFIG_DM_DELAY=m +# CONFIG_DM_UEVENT is not set +CONFIG_NETDEVICES=y +CONFIG_DUMMY=m +CONFIG_BONDING=m +CONFIG_MACVLAN=m +CONFIG_EQUALIZER=m +CONFIG_TUN=m +CONFIG_VETH=m +# CONFIG_NET_ETHERNET is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +CONFIG_WLAN=y +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +# CONFIG_LIBERTAS is not set +# CONFIG_LIBERTAS_THINFIRM is not set +# CONFIG_AT76C50X_USB is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_RTL8187 is not set +# CONFIG_MAC80211_HWSIM is not set +# CONFIG_P54_COMMON is not set +# CONFIG_ATH_COMMON is not set +# CONFIG_HOSTAP is not set +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +# CONFIG_ZD1211RW is not set +# CONFIG_RT2X00 is not set +# CONFIG_WL12XX is not set +# CONFIG_IWM is not set + +# +# WiMAX Wireless Broadband devices +# +# CONFIG_WIMAX_I2400M_USB is not set +# CONFIG_WIMAX_I2400M_SDIO is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_ATM_DRIVERS is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m +CONFIG_PPPOE=m +# CONFIG_PPPOATM is not set +CONFIG_PPPOL2TP=m +# CONFIG_SLIP is not set +CONFIG_SLHC=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y +CONFIG_NETPOLL=y +CONFIG_NETPOLL_TRAP=y +CONFIG_NET_POLL_CONTROLLER=y +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=y +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_QT2160 is not set +# CONFIG_KEYBOARD_LKKBD is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_MAX7359 is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_TWL4030 is not set +# CONFIG_KEYBOARD_XTKBD is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_MOUSE_SYNAPTICS_I2C is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_TOUCHSCREEN_AD7877 is not set +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879_SPI is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_EETI is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MCS5000 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_TOUCHSCREEN_W90X900 is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set +CONFIG_INPUT_TWL4030_PWRBUTTON=y +CONFIG_INPUT_UINPUT=y +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_MAX3100 is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_DESIGNWARE is not set +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set +CONFIG_SPI_OMAP24XX=y + +# +# SPI Protocol Masters +# +CONFIG_SPI_SPIDEV=y +# CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set +CONFIG_GPIO_TWL4030=y + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# +# CONFIG_W1 is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set +# CONFIG_BATTERY_DS2782 is not set +CONFIG_BATTERY_BQ27x00=y +# CONFIG_BATTERY_MAX17040 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_MAX1111 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_SPI is not set +CONFIG_THERMAL=y +CONFIG_THERMAL_HWMON=y +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_OMAP_WATCHDOG=y +# CONFIG_TWL4030_WATCHDOG is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +CONFIG_TWL4030_CORE=y +# CONFIG_TWL4030_POWER is not set +# CONFIG_TWL4030_CODEC is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_REGULATOR_MAX1586 is not set +CONFIG_REGULATOR_TWL4030=y +# CONFIG_REGULATOR_LP3971 is not set +# CONFIG_REGULATOR_TPS65023 is not set +# CONFIG_REGULATOR_TPS6507X is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +# CONFIG_FB_OMAP is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=y + +# +# Display device support +# +CONFIG_DISPLAY_SUPPORT=y + +# +# Display hardware drivers +# + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_HWDEP=y +CONFIG_SND_RAWMIDI=y +CONFIG_SND_JACK=y +CONFIG_SND_SEQUENCER=m +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +CONFIG_SND_HRTIMER=m +CONFIG_SND_SEQ_HRTIMER_DEFAULT=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_RAWMIDI_SEQ=m +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +# CONFIG_SND_ARM is not set +CONFIG_SND_SPI=y +CONFIG_SND_USB=y +CONFIG_SND_USB_AUDIO=y +CONFIG_SND_USB_CAIAQ=m +CONFIG_SND_USB_CAIAQ_INPUT=y +CONFIG_SND_SOC=y +CONFIG_SND_OMAP_SOC=y +CONFIG_SND_SOC_I2C_AND_SPI=y +# CONFIG_SND_SOC_ALL_CODECS is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_HID_DRAGONRISE is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_TWINHAN is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_WACOM is not set +# CONFIG_HID_ZEROPLUS is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +CONFIG_USB_SUSPEND=y +CONFIG_USB_OTG=y +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_OXU210HP_HCD=y +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SOC=y + +# +# OMAP 343x high speed USB support +# +# CONFIG_USB_MUSB_HOST is not set +# CONFIG_USB_MUSB_PERIPHERAL is not set +CONFIG_USB_MUSB_OTG=y +CONFIG_USB_GADGET_MUSB_HDRC=y +CONFIG_USB_MUSB_HDRC_HCD=y +# CONFIG_MUSB_PIO_ONLY is not set +CONFIG_USB_INVENTRA_DMA=y +# CONFIG_USB_TI_CPPI_DMA is not set +# CONFIG_USB_MUSB_DEBUG is not set + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m +CONFIG_USB_WDM=m +CONFIG_USB_TMC=m + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +CONFIG_USB_SERIAL=m +CONFIG_USB_EZUSB=y +CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_AIRCABLE=m +CONFIG_USB_SERIAL_ARK3116=m +CONFIG_USB_SERIAL_BELKIN=m +CONFIG_USB_SERIAL_CH341=m +CONFIG_USB_SERIAL_WHITEHEAT=m +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +# CONFIG_USB_SERIAL_CP210X is not set +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_FUNSOFT=m +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_IUU=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +CONFIG_USB_SERIAL_KEYSPAN=m +CONFIG_USB_SERIAL_KEYSPAN_MPR=y +CONFIG_USB_SERIAL_KEYSPAN_USA28=y +CONFIG_USB_SERIAL_KEYSPAN_USA28X=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y +CONFIG_USB_SERIAL_KEYSPAN_USA19=y +CONFIG_USB_SERIAL_KEYSPAN_USA18X=y +CONFIG_USB_SERIAL_KEYSPAN_USA19W=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y +CONFIG_USB_SERIAL_KEYSPAN_USA49W=y +CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +CONFIG_USB_SERIAL_MOS7720=m +CONFIG_USB_SERIAL_MOS7840=m +CONFIG_USB_SERIAL_MOTOROLA=m +CONFIG_USB_SERIAL_NAVMAN=m +CONFIG_USB_SERIAL_PL2303=m +CONFIG_USB_SERIAL_OTI6858=m +# CONFIG_USB_SERIAL_QUALCOMM is not set +CONFIG_USB_SERIAL_SPCP8X5=m +CONFIG_USB_SERIAL_HP4X=m +CONFIG_USB_SERIAL_SAFE=m +# CONFIG_USB_SERIAL_SAFE_PADDED is not set +CONFIG_USB_SERIAL_SIEMENS_MPI=m +CONFIG_USB_SERIAL_SIERRAWIRELESS=m +# CONFIG_USB_SERIAL_SYMBOL is not set +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +CONFIG_USB_SERIAL_OPTION=m +CONFIG_USB_SERIAL_OMNINET=m +CONFIG_USB_SERIAL_OPTICON=m +CONFIG_USB_SERIAL_DEBUG=m + +# +# USB Miscellaneous drivers +# +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +CONFIG_USB_SISUSBVGA=m +CONFIG_USB_SISUSBVGA_CON=y +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +CONFIG_USB_TEST=m +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_ATM is not set +CONFIG_USB_GADGET=m +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_DEBUG_FS=y +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_R8A66597 is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C_HSOTG is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LANGWELL is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +CONFIG_USB_ZERO=m +CONFIG_USB_ZERO_HNPTEST=y +# CONFIG_USB_AUDIO is not set +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_ETH_EEM is not set +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +CONFIG_USB_MIDI_GADGET=m +CONFIG_USB_G_PRINTER=m +CONFIG_USB_CDC_COMPOSITE=m + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +CONFIG_USB_GPIO_VBUS=y +# CONFIG_ISP1301_OMAP is not set +CONFIG_TWL4030_USB=y +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_UNSAFE_RESUME=y + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +CONFIG_SDIO_UART=y +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_OMAP is not set +CONFIG_MMC_OMAP_HS=y +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set +CONFIG_MMC_SPI=m +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LP3944 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_BD2802 is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=m +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_BACKLIGHT=m +# CONFIG_LEDS_TRIGGER_GPIO is not set +CONFIG_LEDS_TRIGGER_DEFAULT_ON=m + +# +# iptables trigger is under Netfilter config (LED target) +# +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +CONFIG_RTC_DRV_TWL4030=y +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +CONFIG_UIO=m +CONFIG_UIO_PDRV=m +CONFIG_UIO_PDRV_GENIRQ=m +# CONFIG_UIO_SMX is not set +# CONFIG_UIO_SERCOS3 is not set + +# +# TI VLYNQ +# +CONFIG_STAGING=y +# CONFIG_STAGING_EXCLUDE_BUILD is not set +# CONFIG_USB_IP_COMMON is not set +# CONFIG_W35UND is not set +# CONFIG_PRISM2_USB is not set +# CONFIG_ECHO is not set +# CONFIG_OTUS is not set +# CONFIG_COMEDI is not set +# CONFIG_ASUS_OLED is not set +# CONFIG_INPUT_MIMIO is not set +# CONFIG_TRANZPORT is not set + +# +# Android +# + +# +# Qualcomm MSM Camera And Video +# + +# +# Camera Sensor Selection +# +# CONFIG_INPUT_GPIO is not set +# CONFIG_DST is not set +# CONFIG_POHMELFS is not set +# CONFIG_PLAN9AUTH is not set +# CONFIG_LINE6_USB is not set +# CONFIG_USB_SERIAL_QUATECH2 is not set +# CONFIG_USB_SERIAL_QUATECH_USB2 is not set +# CONFIG_VT6656 is not set +# CONFIG_FB_UDL is not set + +# +# RAR Register Driver +# +# CONFIG_RAR_REGISTER is not set +# CONFIG_IIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=m +CONFIG_EXT4_FS_XATTR=y +# CONFIG_EXT4_FS_POSIX_ACL is not set +# CONFIG_EXT4_FS_SECURITY is not set +# CONFIG_EXT4_DEBUG is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=m +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=m +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +CONFIG_REISERFS_PROC_INFO=y +CONFIG_REISERFS_FS_XATTR=y +# CONFIG_REISERFS_FS_POSIX_ACL is not set +# CONFIG_REISERFS_FS_SECURITY is not set +CONFIG_JFS_FS=m +# CONFIG_JFS_POSIX_ACL is not set +# CONFIG_JFS_SECURITY is not set +# CONFIG_JFS_DEBUG is not set +# CONFIG_JFS_STATISTICS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_XFS_FS=m +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set +# CONFIG_XFS_DEBUG is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set +CONFIG_PRINT_QUOTA_WARNING=y +CONFIG_QUOTA_TREE=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=m +CONFIG_FUSE_FS=y +# CONFIG_CUSE is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +CONFIG_NTFS_RW=y + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_CONFIGFS_FS=m +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_FS_POSIX_ACL=y +CONFIG_JFFS2_FS_SECURITY=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +# CONFIG_JFFS2_CMODE_PRIORITY is not set +# CONFIG_JFFS2_CMODE_SIZE is not set +CONFIG_JFFS2_CMODE_FAVOURLZO=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_XATTR=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +# CONFIG_UBIFS_FS_DEBUG is not set +# CONFIG_CRAMFS is not set +CONFIG_SQUASHFS=y +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set +CONFIG_ROOT_NFS=y +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +CONFIG_CIFS=m +CONFIG_CIFS_STATS=y +CONFIG_CIFS_STATS2=y +# CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_UPCALL is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_DFS_UPCALL is not set +CONFIG_CIFS_EXPERIMENTAL=y +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +CONFIG_EFI_PARTITION=y +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +CONFIG_SCHEDSTATS=y +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_KMEMLEAK is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_RING_BUFFER_ALLOW_SWAP=y +CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_RING_BUFFER_BENCHMARK is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +CONFIG_KEYS=y +# CONFIG_KEYS_DEBUG_PROC_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_XOR_BLOCKS=m +CONFIG_ASYNC_CORE=m +CONFIG_ASYNC_MEMCPY=m +CONFIG_ASYNC_XOR=m +CONFIG_ASYNC_PQ=m +CONFIG_ASYNC_RAID6_RECOV=m +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_FIPS=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y +CONFIG_CRYPTO_CRYPTD=m +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_SEQIV=m + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_CTR=m +CONFIG_CRYPTO_CTS=m +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_XTS=m + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=m +CONFIG_CRYPTO_XCBC=m +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +CONFIG_CRYPTO_GHASH=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=y +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=y +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_SALSA20=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_ZLIB is not set +CONFIG_CRYPTO_LZO=y + +# +# Random Number Generation +# +CONFIG_CRYPTO_ANSI_CPRNG=m +CONFIG_CRYPTO_HW=y +CONFIG_BINARY_PRINTF=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +CONFIG_CRC16=y +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=y +CONFIG_CRC32=y +CONFIG_CRC7=y +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- cgit v0.10.2 From 8d88f7f70cca3fa6aabac287fccd40cebacb92d1 Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Fri, 11 Dec 2009 16:16:34 -0800 Subject: omap3: pandora: board file updates for .33 Pandora board file updates: - change keycodes of game buttons it was decided not to use ABXY layout by the developers. - drop i2c bus 3 speed to 100kHz this is needed for battery monitoring chip to work reliably. - drop pandora_lcd platform_device the older DSS driver was never functional on l-o or mainline kernels due to missing panel driver, so remove unneeded pandora_lcd platform_device. This also removes last OMAP_TAG from the board file. Signed-off-by: Grazvydas Ignotas Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index c1cc99c..6f6c601 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -98,10 +98,10 @@ static struct gpio_keys_button pandora_gpio_keys[] = { GPIO_BUTTON_LOW(103, KEY_DOWN, "down"), GPIO_BUTTON_LOW(96, KEY_LEFT, "left"), GPIO_BUTTON_LOW(98, KEY_RIGHT, "right"), - GPIO_BUTTON_LOW(111, BTN_A, "a"), - GPIO_BUTTON_LOW(106, BTN_B, "b"), - GPIO_BUTTON_LOW(109, BTN_X, "x"), - GPIO_BUTTON_LOW(101, BTN_Y, "y"), + GPIO_BUTTON_LOW(109, KEY_KP1, "game 1"), + GPIO_BUTTON_LOW(111, KEY_KP2, "game 2"), + GPIO_BUTTON_LOW(106, KEY_KP3, "game 3"), + GPIO_BUTTON_LOW(101, KEY_KP4, "game 4"), GPIO_BUTTON_LOW(102, BTN_TL, "l"), GPIO_BUTTON_LOW(97, BTN_TL2, "l2"), GPIO_BUTTON_LOW(105, BTN_TR, "r"), @@ -315,7 +315,7 @@ static int __init omap3pandora_i2c_init(void) omap_register_i2c_bus(1, 2600, omap3pandora_i2c_boardinfo, ARRAY_SIZE(omap3pandora_i2c_boardinfo)); /* i2c2 pins are not connected */ - omap_register_i2c_bus(3, 400, NULL, 0); + omap_register_i2c_bus(3, 100, NULL, 0); return 0; } @@ -368,23 +368,8 @@ static struct spi_board_info omap3pandora_spi_board_info[] __initdata = { } }; -static struct platform_device omap3pandora_lcd_device = { - .name = "pandora_lcd", - .id = -1, -}; - -static struct omap_lcd_config omap3pandora_lcd_config __initdata = { - .ctrl_name = "internal", -}; - -static struct omap_board_config_kernel omap3pandora_config[] __initdata = { - { OMAP_TAG_LCD, &omap3pandora_lcd_config }, -}; - static void __init omap3pandora_init_irq(void) { - omap_board_config = omap3pandora_config; - omap_board_config_size = ARRAY_SIZE(omap3pandora_config); omap2_init_common_hw(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); omap_init_irq(); @@ -392,7 +377,6 @@ static void __init omap3pandora_init_irq(void) } static struct platform_device *omap3pandora_devices[] __initdata = { - &omap3pandora_lcd_device, &pandora_leds_gpio, &pandora_keys_gpio, }; -- cgit v0.10.2 From b570e0ec25b371c2e01a1a558e852e2618526817 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Fri, 11 Dec 2009 16:16:34 -0800 Subject: OMAP4: Fix cpu detection This patch fixes the OMAP4430 cpu detection. The IC rev detection is done with hawkeye and rev. Note that rev does not map directly to defined processor revision numbers as ES1.0 uses value 0.It also fixes the SCM base address to read the correct ID_CODE register. Also the cpu_is_omap44xx() and cpu_is_omap443x() correctly populated instead of always being true Signed-off-by: Santosh Shilimkar Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index f48a4b2..3641ba0 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -246,6 +246,31 @@ void __init omap3_check_revision(void) } } +void __init omap4_check_revision(void) +{ + u32 idcode; + u16 hawkeye; + u8 rev; + char *rev_name = "ES1.0"; + + /* + * The IC rev detection is done with hawkeye and rev. + * Note that rev does not map directly to defined processor + * revision numbers as ES1.0 uses value 0. + */ + idcode = read_tap_reg(OMAP_TAP_IDCODE); + hawkeye = (idcode >> 12) & 0xffff; + rev = (idcode >> 28) & 0xff; + + if ((hawkeye == 0xb852) && (rev == 0x0)) { + omap_revision = OMAP4430_REV_ES1_0; + pr_info("OMAP%04x %s\n", omap_rev() >> 16, rev_name); + return; + } + + pr_err("Unknown OMAP4 CPU id\n"); +} + #define OMAP3_SHOW_FEATURE(feat) \ if (omap3_has_ ##feat()) \ printk(#feat" "); @@ -336,7 +361,7 @@ void __init omap2_check_revision(void) omap3_check_features(); omap3_cpuinfo(); } else if (cpu_is_omap44xx()) { - printk(KERN_INFO "FIXME: CPU revision = OMAP4430\n"); + omap4_check_revision(); return; } else { pr_err("OMAP revision unknown, please fix!\n"); diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 01ab1e5..bf1eaf3 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -280,7 +280,7 @@ void __init omap2_set_globals_343x(void) #if defined(CONFIG_ARCH_OMAP4) static struct omap_globals omap4_globals = { .class = OMAP443X_CLASS, - .tap = OMAP2_L4_IO_ADDRESS(0x4830a000), + .tap = OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE), .ctrl = OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE), .prm = OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE), .cm = OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE), diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 2e17890..9359785 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -176,11 +176,13 @@ IS_OMAP_CLASS(15xx, 0x15) IS_OMAP_CLASS(16xx, 0x16) IS_OMAP_CLASS(24xx, 0x24) IS_OMAP_CLASS(34xx, 0x34) +IS_OMAP_CLASS(44xx, 0x44) IS_OMAP_SUBCLASS(242x, 0x242) IS_OMAP_SUBCLASS(243x, 0x243) IS_OMAP_SUBCLASS(343x, 0x343) IS_OMAP_SUBCLASS(363x, 0x363) +IS_OMAP_SUBCLASS(443x, 0x443) #define cpu_is_omap7xx() 0 #define cpu_is_omap15xx() 0 @@ -408,8 +410,8 @@ IS_OMAP_TYPE(3517, 0x3517) # if defined(CONFIG_ARCH_OMAP4) # undef cpu_is_omap44xx # undef cpu_is_omap443x -# define cpu_is_omap44xx() 1 -# define cpu_is_omap443x() 1 +# define cpu_is_omap44xx() is_omap44xx() +# define cpu_is_omap443x() is_omap443x() # endif /* Macros to detect if we have OMAP1 or OMAP2 */ @@ -443,7 +445,8 @@ IS_OMAP_TYPE(3517, 0x3517) #define OMAP3505_REV(v) (OMAP35XX_CLASS | (0x3505 << 16) | (v << 12)) #define OMAP3517_REV(v) (OMAP35XX_CLASS | (0x3517 << 16) | (v << 12)) -#define OMAP443X_CLASS 0x44300034 +#define OMAP443X_CLASS 0x44300044 +#define OMAP4430_REV_ES1_0 0x44300044 /* * omap_chip bits -- cgit v0.10.2 From a7c3ae2cb6d144bdf6c582898d2368f5f91a1775 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Fri, 11 Dec 2009 16:16:35 -0800 Subject: OMAP4: Fix SRAM base and size This patch fixes the public sram base address and available size on OMAP4430. Signed-off-by: Santosh Shilimkar Signed-off-by: Tony Lindgren diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index ad2bf07..d8d5094 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -48,8 +48,10 @@ #define OMAP3_SRAM_VA 0xfe400000 #define OMAP3_SRAM_PUB_PA 0x40208000 #define OMAP3_SRAM_PUB_VA (OMAP3_SRAM_VA + 0x8000) -#define OMAP4_SRAM_PA 0x40200000 /*0x402f0000*/ -#define OMAP4_SRAM_VA 0xfe400000 /*0xfe4f0000*/ +#define OMAP4_SRAM_PA 0x40300000 +#define OMAP4_SRAM_VA 0xfe400000 +#define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000) +#define OMAP4_SRAM_PUB_VA (OMAP4_SRAM_VA + 0x4000) #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) #define SRAM_BOOTLOADER_SZ 0x00 @@ -140,6 +142,10 @@ void __init omap_detect_sram(void) } else { omap_sram_size = 0x8000; /* 32K */ } + } else if (cpu_is_omap44xx()) { + omap_sram_base = OMAP4_SRAM_PUB_VA; + omap_sram_start = OMAP4_SRAM_PUB_PA; + omap_sram_size = 0xa000; /* 40K */ } else { omap_sram_base = OMAP2_SRAM_PUB_VA; omap_sram_start = OMAP2_SRAM_PUB_PA; @@ -153,7 +159,7 @@ void __init omap_detect_sram(void) } else if (cpu_is_omap44xx()) { omap_sram_base = OMAP4_SRAM_VA; omap_sram_start = OMAP4_SRAM_PA; - omap_sram_size = 0x8000; /* 32K */ + omap_sram_size = 0xe000; /* 56K */ } else { omap_sram_base = OMAP2_SRAM_VA; omap_sram_start = OMAP2_SRAM_PA; -- cgit v0.10.2 From 942e2c9e529a57ce2bb1cf984d58f88d9b6e77e5 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Fri, 11 Dec 2009 16:16:35 -0800 Subject: OMAP4: AuxCoreBoot registers only accessible in secure mode The AuxCoreBoot0 and AuxCoreBoot1 can be only accessed in secure mode. Replace the current code with secure monitor API's to access/modify these registers. Signed-off-by: Santosh Shilimkar Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S index 4afadba..aa3f65c 100644 --- a/arch/arm/mach-omap2/omap-headsmp.S +++ b/arch/arm/mach-omap2/omap-headsmp.S @@ -27,20 +27,39 @@ * OMAP4 specific entry point for secondary CPU to jump from ROM * code. This routine also provides a holding flag into which * secondary core is held until we're ready for it to initialise. - * The primary core will update the this flag using a hardware - * register AuxCoreBoot1. + * The primary core will update this flag using a hardware + * register AuxCoreBoot0. */ ENTRY(omap_secondary_startup) - mrc p15, 0, r0, c0, c0, 5 - and r0, r0, #0x0f -hold: ldr r1, =OMAP4_AUX_CORE_BOOT1_PA @ read from AuxCoreBoot1 - ldr r2, [r1] - cmp r2, r0 +hold: ldr r12,=0x103 + dsb + smc @ read from AuxCoreBoot0 + mov r0, r0, lsr #9 + mrc p15, 0, r4, c0, c0, 5 + and r4, r4, #0x0f + cmp r0, r4 bne hold /* - * we've been released from the cpu_release,secondary_stack + * we've been released from the wait loop,secondary_stack * should now contain the SVC stack for this core */ b secondary_startup +END(omap_secondary_startup) + +ENTRY(omap_modify_auxcoreboot0) + stmfd sp!, {r1-r12, lr} + ldr r12, =0x104 + dsb + smc + ldmfd sp!, {r1-r12, pc} +END(omap_modify_auxcoreboot0) + +ENTRY(omap_auxcoreboot_addr) + stmfd sp!, {r2-r12, lr} + ldr r12, =0x105 + dsb + smc + ldmfd sp!, {r2-r12, pc} +END(omap_auxcoreboot_addr) diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index 4890bcf..59e8478 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -21,15 +21,12 @@ #include #include +#include #include #include #include #include -/* Registers used for communicating startup information */ -static void __iomem *omap4_auxcoreboot_reg0; -static void __iomem *omap4_auxcoreboot_reg1; - /* SCU base address */ static void __iomem *scu_base; @@ -74,12 +71,13 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) spin_lock(&boot_lock); /* - * Update the AuxCoreBoot1 with boot state for secondary core. + * Update the AuxCoreBoot0 with boot state for secondary core. * omap_secondary_startup() routine will hold the secondary core till * the AuxCoreBoot1 register is updated with cpu state * A barrier is added to ensure that write buffer is drained */ - __raw_writel(cpu, omap4_auxcoreboot_reg1); + omap_modify_auxcoreboot0(0x200, 0x0); + flush_cache_all(); smp_wmb(); timeout = jiffies + (1 * HZ); @@ -99,17 +97,18 @@ static void __init wakeup_secondary(void) { /* * Write the address of secondary startup routine into the - * AuxCoreBoot0 where ROM code will jump and start executing + * AuxCoreBoot1 where ROM code will jump and start executing * on secondary core once out of WFE * A barrier is added to ensure that write buffer is drained */ - __raw_writel(virt_to_phys(omap_secondary_startup), \ - omap4_auxcoreboot_reg0); + omap_auxcoreboot_addr(virt_to_phys(omap_secondary_startup)); smp_wmb(); /* * Send a 'sev' to wake the secondary core from WFE. + * Drain the outstanding writes to memory */ + dsb(); set_event(); mb(); } @@ -136,7 +135,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus) { unsigned int ncores = get_core_count(); unsigned int cpu = smp_processor_id(); - void __iomem *omap4_wkupgen_base; int i; /* sanity check */ @@ -168,12 +166,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus) for (i = 0; i < max_cpus; i++) set_cpu_present(i, true); - /* Never released */ - omap4_wkupgen_base = ioremap(OMAP44XX_WKUPGEN_BASE, SZ_4K); - BUG_ON(!omap4_wkupgen_base); - omap4_auxcoreboot_reg0 = omap4_wkupgen_base + 0x800; - omap4_auxcoreboot_reg1 = omap4_wkupgen_base + 0x804; - if (max_cpus > 1) { /* * Enable the local timer or broadcast device for the diff --git a/arch/arm/plat-omap/include/plat/smp.h b/arch/arm/plat-omap/include/plat/smp.h index dcaa8fd..8983d54 100644 --- a/arch/arm/plat-omap/include/plat/smp.h +++ b/arch/arm/plat-omap/include/plat/smp.h @@ -28,6 +28,8 @@ /* Needed for secondary core boot */ extern void omap_secondary_startup(void); +extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask); +extern void omap_auxcoreboot_addr(u32 cpu_addr); /* * We use Soft IRQ1 as the IPI -- cgit v0.10.2 From b2f5c9413cc54000706959fa710c21b2d90a647c Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Fri, 11 Dec 2009 16:16:35 -0800 Subject: OMAP4: Remove the secondary wait loop The secondary cores wakes up in time so the wait loop is not necessary anymore. Signed-off-by: Santosh Shilimkar Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index 59e8478..38153e5 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -17,7 +17,6 @@ */ #include #include -#include #include #include @@ -62,8 +61,6 @@ void __cpuinit platform_secondary_init(unsigned int cpu) int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) { - unsigned long timeout; - /* * Set synchronisation state between this boot processor * and the secondary one @@ -80,10 +77,6 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) flush_cache_all(); smp_wmb(); - timeout = jiffies + (1 * HZ); - while (time_before(jiffies, timeout)) - ; - /* * Now the secondary core is starting up let it run its * calibrations, then wait for it to finish -- cgit v0.10.2 From dca0d917696a3724ed1613f549a07020578cb037 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Fri, 11 Dec 2009 16:16:35 -0800 Subject: OMAP4: Sync up omap4430 defconfig Enable minimum features to boot omap4430 on es1.0 samples. v2 versions removes the "CONFIG_SYSFS_DEPRECATED_V2" since it's deprecated. Without this older file system doesn't boot. One need to upgrade the filesystem if getting stuck in first init function. Signed-off-by: Santosh Shilimkar Signed-off-by: Tony Lindgren diff --git a/arch/arm/configs/omap_4430sdp_defconfig b/arch/arm/configs/omap_4430sdp_defconfig index a464ca3..2319113 100644 --- a/arch/arm/configs/omap_4430sdp_defconfig +++ b/arch/arm/configs/omap_4430sdp_defconfig @@ -1,26 +1,29 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc7 -# Tue Jun 9 12:36:23 2009 +# Linux kernel version: 2.6.32 +# Sun Dec 6 23:37:45 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_LOCKBREAK=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_ARCH_HAS_CPUFREQ=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -39,11 +42,12 @@ CONFIG_BSD_PROCESS_ACCT=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -52,8 +56,7 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -# CONFIG_SYSFS_DEPRECATED=y is not set -# CONFIG_SYSFS_DEPRECATED_V2=y is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y @@ -70,7 +73,6 @@ CONFIG_UID16=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -83,6 +85,10 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y CONFIG_COMPAT_BRK=y @@ -90,13 +96,16 @@ CONFIG_COMPAT_BRK=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y @@ -110,7 +119,7 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -131,6 +140,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # # System Type # +CONFIG_MMU=y # CONFIG_ARCH_AAEC2000 is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set @@ -142,8 +152,10 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -166,10 +178,13 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set # CONFIG_ARCH_DAVINCI is not set CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_BCMRING is not set # # TI OMAP Implementations @@ -190,9 +205,12 @@ CONFIG_ARCH_OMAP4=y CONFIG_OMAP_32K_TIMER=y CONFIG_OMAP_32K_TIMER_HZ=128 CONFIG_OMAP_DM_TIMER=y -CONFIG_OMAP_LL_DEBUG_UART1=y +# CONFIG_OMAP_LL_DEBUG_UART1 is not set # CONFIG_OMAP_LL_DEBUG_UART2 is not set -# CONFIG_OMAP_LL_DEBUG_UART3 is not set +CONFIG_OMAP_LL_DEBUG_UART3=y +# CONFIG_OMAP_LL_DEBUG_NONE is not set +# CONFIG_OMAP_PM_NONE is not set +CONFIG_OMAP_PM_NOOP=y # # OMAP Board Type @@ -207,7 +225,7 @@ CONFIG_CPU_32v6K=y CONFIG_CPU_V7=y CONFIG_CPU_32v7=y CONFIG_CPU_ABRT_EV7=y -CONFIG_CPU_PABRT_IFAR=y +CONFIG_CPU_PABRT_V7=y CONFIG_CPU_CACHE_V7=y CONFIG_CPU_CACHE_VIPT=y CONFIG_CPU_COPY_V6=y @@ -222,9 +240,10 @@ CONFIG_CPU_CP15_MMU=y # CONFIG_ARM_THUMB is not set # CONFIG_ARM_THUMBEE is not set # CONFIG_CPU_ICACHE_DISABLE is not set -CONFIG_CPU_DCACHE_DISABLE=y +# CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_BPREDICT_DISABLE is not set CONFIG_HAS_TLS_REG=y +CONFIG_ARM_L1_CACHE_SHIFT=5 # CONFIG_ARM_ERRATA_430973 is not set # CONFIG_ARM_ERRATA_458693 is not set # CONFIG_ARM_ERRATA_460075 is not set @@ -245,18 +264,20 @@ CONFIG_ARM_GIC=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y CONFIG_HAVE_ARM_SCU=y -CONFIG_HAVE_ARM_TWD=y CONFIG_VMSPLIT_3G=y # CONFIG_VMSPLIT_2G is not set # CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_NR_CPUS=2 # CONFIG_HOTPLUG_CPU is not set -CONFIG_LOCAL_TIMERS=y -# CONFIG_PREEMPT is not set +# CONFIG_LOCAL_TIMERS is not set +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y CONFIG_HZ=128 +# CONFIG_THUMB2_KERNEL is not set CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set +CONFIG_OABI_COMPAT=y # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set # CONFIG_HIGHMEM is not set @@ -271,10 +292,13 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -# CONFIG_UNEVICTABLE_LRU is not set CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # CONFIG_LEDS is not set CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set # # Boot options @@ -298,9 +322,11 @@ CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS0,115200n8 initrd=0x81600 # # At least one emulation must be selected # +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set CONFIG_VFP=y CONFIG_VFPv3=y -# CONFIG_NEON is not set +CONFIG_NEON=y # # Userspace binary formats @@ -325,6 +351,7 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -342,6 +369,7 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=16384 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set +# CONFIG_MG_DISK is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -355,6 +383,7 @@ CONFIG_HAVE_IDE=y # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set # CONFIG_MD is not set +# CONFIG_PHONE is not set # # Input device support @@ -427,6 +456,11 @@ CONFIG_HW_RANDOM=y # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y # CONFIG_DEBUG_GPIO is not set @@ -447,11 +481,14 @@ CONFIG_GPIOLIB=y # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -472,21 +509,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_T7L66XB is not set # CONFIG_MFD_TC6387XB is not set # CONFIG_MFD_TC6393XB is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -511,14 +535,17 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set -# CONFIG_ACCESSIBILITY is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set -# CONFIG_REGULATOR is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -535,9 +562,12 @@ CONFIG_JBD=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -601,7 +631,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set # # Partition Types @@ -673,23 +702,24 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set -CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +# CONFIG_DETECT_SOFTLOCKUP is not set CONFIG_DETECT_HUNG_TASK=y # CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 -CONFIG_SCHED_DEBUG=y +# CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_PREEMPT is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -708,31 +738,22 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_PAGE_POISONING is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set +# CONFIG_BRANCH_PROFILE_NONE is not set +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -754,7 +775,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -796,11 +816,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set -- cgit v0.10.2 From edc961a2fa51cf3fceba8df8bb52c7a048e4661b Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Fri, 11 Dec 2009 16:16:35 -0800 Subject: omap3: cm-t35: add mux initialization CM-T35 can be assembled with different set of peripherals thus making certain interfaces available to user as GPIOs or dedicated pins. Because of it CM-T35 bootloader sets up mux configuration only for pins necessary to boot the system and the rest of the mux configuration is done by the kernel. Besides, having mux configuration in the kernel allows to minimize dependancy on bootloader. Signed-off-by: Mike Rapoport Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 06dc64d..76c11ee 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -135,6 +135,7 @@ config MACH_CM_T35 bool "CompuLab CM-T35 module" depends on ARCH_OMAP3 && ARCH_OMAP34XX select OMAP_PACKAGE_CUS + select OMAP_MUX config MACH_IGEP0020 bool "IGEP0020" diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 507c922..1591aae 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -482,13 +482,98 @@ static void __init cm_t35_map_io(void) omap2_map_common_io(); } -#ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { + /* nCS and IRQ for CM-T35 ethernet */ + OMAP3_MUX(GPMC_NCS5, OMAP_MUX_MODE0), + OMAP3_MUX(UART3_CTS_RCTX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP), + + /* nCS and IRQ for SB-T35 ethernet */ + OMAP3_MUX(GPMC_NCS4, OMAP_MUX_MODE0), + OMAP3_MUX(GPMC_WAIT3, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP), + + /* PENDOWN GPIO */ + OMAP3_MUX(GPMC_NCS6, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), + + /* mUSB */ + OMAP3_MUX(HSUSB0_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_STP, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(HSUSB0_DIR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_NXT, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + + /* MMC 2 */ + OMAP3_MUX(SDMMC2_DAT4, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), + OMAP3_MUX(SDMMC2_DAT5, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), + OMAP3_MUX(SDMMC2_DAT6, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), + OMAP3_MUX(SDMMC2_DAT7, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), + + /* McSPI 1 */ + OMAP3_MUX(MCSPI1_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(MCSPI1_SIMO, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(MCSPI1_SOMI, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(MCSPI1_CS0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), + + /* McSPI 4 */ + OMAP3_MUX(MCBSP1_CLKR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), + OMAP3_MUX(MCBSP1_DX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), + OMAP3_MUX(MCBSP1_DR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), + OMAP3_MUX(MCBSP1_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT_PULLUP), + + /* McBSP 2 */ + OMAP3_MUX(MCBSP2_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(MCBSP2_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(MCBSP2_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(MCBSP2_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + + /* serial ports */ + OMAP3_MUX(MCBSP3_CLKX, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), + OMAP3_MUX(MCBSP3_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), + OMAP3_MUX(UART1_TX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(UART1_RX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + + /* DSS */ + OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA9, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA10, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA11, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA12, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA13, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA14, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA20, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + + /* TPS IRQ */ + OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_WAKEUP_EN | \ + OMAP_PIN_INPUT_PULLUP), + { .reg_offset = OMAP_MUX_TERMINATOR }, }; -#else -#define board_mux NULL -#endif static void __init cm_t35_init(void) { @@ -501,9 +586,6 @@ static void __init cm_t35_init(void) cm_t35_init_led(); usb_musb_init(); - - omap_mux_init_signal("sys_nirq", - OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP); } MACHINE_START(CM_T35, "Compulab CM-T35") -- cgit v0.10.2 From f62349ee9788b1d94c55eb6c291d74a1f69bdd9e Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Fri, 11 Dec 2009 16:16:35 -0800 Subject: OMAP3: serial - allow platforms specify which UARTs to initialize This patch adds new function: omap_serial_init_port(port) that can be used to initialize only selected UARTs as serial ports. Platforms can then in their board files call this function instead of omap_serial_init() if they don't want to use all UARTs as serial ports. Signed-off-by: Mika Westerberg Signed-off-by: Kevin Hilman Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 2e17b57..6278fe5 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -631,24 +631,64 @@ void __init omap_serial_early_init(void) } } -void __init omap_serial_init(void) +/** + * omap_serial_init_port() - initialize single serial port + * @port: serial port number (0-3) + * + * This function initialies serial driver for given @port only. + * Platforms can call this function instead of omap_serial_init() + * if they don't plan to use all available UARTs as serial ports. + * + * Don't mix calls to omap_serial_init_port() and omap_serial_init(), + * use only one of the two. + */ +void __init omap_serial_init_port(int port) { - int i; + struct omap_uart_state *uart; + struct platform_device *pdev; + struct device *dev; - for (i = 0; i < ARRAY_SIZE(omap_uart); i++) { - struct omap_uart_state *uart = &omap_uart[i]; - struct platform_device *pdev = &uart->pdev; - struct device *dev = &pdev->dev; + BUG_ON(port < 0); + BUG_ON(port >= ARRAY_SIZE(omap_uart)); - omap_uart_reset(uart); - omap_uart_idle_init(uart); + uart = &omap_uart[port]; + pdev = &uart->pdev; + dev = &pdev->dev; - if (WARN_ON(platform_device_register(pdev))) - continue; - if ((cpu_is_omap34xx() && uart->padconf) || - (uart->wk_en && uart->wk_mask)) { - device_init_wakeup(dev, true); - DEV_CREATE_FILE(dev, &dev_attr_sleep_timeout); - } + omap_uart_reset(uart); + omap_uart_idle_init(uart); + + if (WARN_ON(platform_device_register(pdev))) + return; + + if ((cpu_is_omap34xx() && uart->padconf) || + (uart->wk_en && uart->wk_mask)) { + device_init_wakeup(dev, true); + DEV_CREATE_FILE(dev, &dev_attr_sleep_timeout); } + + /* omap44xx: Never read empty UART fifo + * omap3xxx: Never read empty UART fifo on UARTs + * with IP rev >=0x52 + */ + if (cpu_is_omap44xx()) + uart->p->serial_in = serial_in_override; + else if ((serial_read_reg(uart->p, UART_OMAP_MVER) & 0xFF) + >= UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV) + uart->p->serial_in = serial_in_override; +} + +/** + * omap_serial_init() - intialize all supported serial ports + * + * Initializes all available UARTs as serial ports. Platforms + * can call this function when they want to have default behaviour + * for serial ports (e.g initialize them all as serial ports). + */ +void __init omap_serial_init(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(omap_uart); i++) + omap_serial_init_port(i); } diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h index 9951345..f5a4a92 100644 --- a/arch/arm/plat-omap/include/plat/serial.h +++ b/arch/arm/plat-omap/include/plat/serial.h @@ -53,6 +53,7 @@ #ifndef __ASSEMBLER__ extern void __init omap_serial_early_init(void); extern void omap_serial_init(void); +extern void omap_serial_init_port(int port); extern int omap_uart_can_sleep(void); extern void omap_uart_check_wakeup(void); extern void omap_uart_prepare_suspend(void); -- cgit v0.10.2 From 8fe8acbe5aabf0d8e6af4c44aa4de0892a770cb0 Mon Sep 17 00:00:00 2001 From: Vimal Singh Date: Fri, 11 Dec 2009 16:16:35 -0800 Subject: omap: Correcting GPMC_CONFIG1_DEVICETYPE_NAND For NAND devices '2' should be used with GPMC_CONFIG1_DEVICETYPE instead of '1'. Signed-off-by: Vimal Singh Signed-off-by: Tony Lindgren diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h index 696e0ca..e081338 100644 --- a/arch/arm/plat-omap/include/plat/gpmc.h +++ b/arch/arm/plat-omap/include/plat/gpmc.h @@ -45,7 +45,7 @@ #define GPMC_CONFIG1_DEVICESIZE_16 GPMC_CONFIG1_DEVICESIZE(1) #define GPMC_CONFIG1_DEVICETYPE(val) ((val & 3) << 10) #define GPMC_CONFIG1_DEVICETYPE_NOR GPMC_CONFIG1_DEVICETYPE(0) -#define GPMC_CONFIG1_DEVICETYPE_NAND GPMC_CONFIG1_DEVICETYPE(1) +#define GPMC_CONFIG1_DEVICETYPE_NAND GPMC_CONFIG1_DEVICETYPE(2) #define GPMC_CONFIG1_MUXADDDATA (1 << 9) #define GPMC_CONFIG1_TIME_PARA_GRAN (1 << 4) #define GPMC_CONFIG1_FCLK_DIV(val) (val & 3) -- cgit v0.10.2 From 3bfe8971a820e3322c9542bcdc58e12583c9bb50 Mon Sep 17 00:00:00 2001 From: Ladislav Michl Date: Fri, 11 Dec 2009 16:16:36 -0800 Subject: omap: arch/arm/plat-omap/devices.c - sort alphabetically Comment in omap_init_devices asks to keep init calls and their implementations in alphabetical order, so let it be that way. Signed-off-by: Ladislav Michl Signed-off-by: Tony Lindgren diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index f866178..30b5db7 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -242,6 +242,39 @@ fail: /*-------------------------------------------------------------------------*/ +#if defined(CONFIG_HW_RANDOM_OMAP) || defined(CONFIG_HW_RANDOM_OMAP_MODULE) + +#ifdef CONFIG_ARCH_OMAP24XX +#define OMAP_RNG_BASE 0x480A0000 +#else +#define OMAP_RNG_BASE 0xfffe5000 +#endif + +static struct resource rng_resources[] = { + { + .start = OMAP_RNG_BASE, + .end = OMAP_RNG_BASE + 0x4f, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device omap_rng_device = { + .name = "omap_rng", + .id = -1, + .num_resources = ARRAY_SIZE(rng_resources), + .resource = rng_resources, +}; + +static void omap_init_rng(void) +{ + (void) platform_device_register(&omap_rng_device); +} +#else +static inline void omap_init_rng(void) {} +#endif + +/*-------------------------------------------------------------------------*/ + /* Numbering for the SPI-capable controllers when used for SPI: * spi = 1 * uwire = 2 @@ -324,39 +357,6 @@ static void omap_init_wdt(void) static inline void omap_init_wdt(void) {} #endif -/*-------------------------------------------------------------------------*/ - -#if defined(CONFIG_HW_RANDOM_OMAP) || defined(CONFIG_HW_RANDOM_OMAP_MODULE) - -#ifdef CONFIG_ARCH_OMAP24XX -#define OMAP_RNG_BASE 0x480A0000 -#else -#define OMAP_RNG_BASE 0xfffe5000 -#endif - -static struct resource rng_resources[] = { - { - .start = OMAP_RNG_BASE, - .end = OMAP_RNG_BASE + 0x4f, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device omap_rng_device = { - .name = "omap_rng", - .id = -1, - .num_resources = ARRAY_SIZE(rng_resources), - .resource = rng_resources, -}; - -static void omap_init_rng(void) -{ - (void) platform_device_register(&omap_rng_device); -} -#else -static inline void omap_init_rng(void) {} -#endif - /* * This gets called after board-specific INIT_MACHINE, and initializes most * on-chip peripherals accessible on this board (except for few like USB): @@ -384,9 +384,9 @@ static int __init omap_init_devices(void) */ omap_init_dsp(); omap_init_kp(); + omap_init_rng(); omap_init_uwire(); omap_init_wdt(); - omap_init_rng(); return 0; } arch_initcall(omap_init_devices); -- cgit v0.10.2 From 9cb87a6b443fe6061d91b7eb220d15d01e0dc611 Mon Sep 17 00:00:00 2001 From: vikram pandita Date: Fri, 11 Dec 2009 16:16:36 -0800 Subject: omap: header: remove unused data-type Remove unused data type omap_gpio_switch_config Thereby also get rid of following sparse warnings: arch/arm/plat-omap/include/plat/board.h :121:20: warning: dubious bitfield without explicit `signed' or `unsigned' arch/arm/plat-omap/include/plat/board.h :122:19: warning: dubious bitfield without explicit `signed' or `unsigned' arch/arm/plat-omap/include/plat/board.h :123:24: warning: dubious bitfield without explicit `signed' or `unsigned' Signed-off-by: Vikram Pandita Acked-by: Felipe Balbi Signed-off-by: Tony Lindgren diff --git a/arch/arm/plat-omap/include/plat/board.h b/arch/arm/plat-omap/include/plat/board.h index abb17b6..376ce18 100644 --- a/arch/arm/plat-omap/include/plat/board.h +++ b/arch/arm/plat-omap/include/plat/board.h @@ -114,15 +114,6 @@ struct omap_pwm_led_platform_data { void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off); }; -/* See arch/arm/plat-omap/include/mach/gpio-switch.h for definitions */ -struct omap_gpio_switch_config { - char name[12]; - u16 gpio; - int flags:4; - int type:4; - int key_code:24; /* Linux key code */ -}; - struct omap_uart_config { /* Bit field of UARTs present; bit 0 --> UART1 */ unsigned int enabled_uarts; -- cgit v0.10.2 From 8d72c796c9d966b0efc26092dae7005c345b3efa Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Fri, 11 Dec 2009 16:16:36 -0800 Subject: omap1: LCD_DMA: Use some define rather than a hexadecimal The patch corrects the issue introduced with one of my earlier patches: OMAP: DMA: Fix omapfb/lcdc on OMAP1510 broken when PM set[1] as pointed out by OMAP subsystem maintainer. Applies on top of my prevoius patch: OMAP: DMA: move LCD DMA related code from plat-omap to mach-omap1[2] Tested on Amstrad Delta Compile tested with omap_generic_2420_defconfig [1] http://patchwork.kernel.org/patch/57922/ [2] http://patchwork.kernel.org/patch/61952/ Signed-off-by: Janusz Krzysztofik Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap1/include/mach/lcdc.h b/arch/arm/mach-omap1/include/mach/lcdc.h new file mode 100644 index 0000000..89bd703 --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/lcdc.h @@ -0,0 +1,57 @@ +/* + * arch/arm/mach-omap1/include/mach/lcdc.h + * + * Extracted from drivers/video/omap/lcdc.c + * Copyright (C) 2004 Nokia Corporation + * Author: Imre Deak + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ +#ifndef __MACH_LCDC_H__ +#define __MACH_LCDC_H__ + +#define OMAP_LCDC_BASE 0xfffec000 +#define OMAP_LCDC_SIZE 256 +#define OMAP_LCDC_IRQ INT_LCD_CTRL + +#define OMAP_LCDC_CONTROL (OMAP_LCDC_BASE + 0x00) +#define OMAP_LCDC_TIMING0 (OMAP_LCDC_BASE + 0x04) +#define OMAP_LCDC_TIMING1 (OMAP_LCDC_BASE + 0x08) +#define OMAP_LCDC_TIMING2 (OMAP_LCDC_BASE + 0x0c) +#define OMAP_LCDC_STATUS (OMAP_LCDC_BASE + 0x10) +#define OMAP_LCDC_SUBPANEL (OMAP_LCDC_BASE + 0x14) +#define OMAP_LCDC_LINE_INT (OMAP_LCDC_BASE + 0x18) +#define OMAP_LCDC_DISPLAY_STATUS (OMAP_LCDC_BASE + 0x1c) + +#define OMAP_LCDC_STAT_DONE (1 << 0) +#define OMAP_LCDC_STAT_VSYNC (1 << 1) +#define OMAP_LCDC_STAT_SYNC_LOST (1 << 2) +#define OMAP_LCDC_STAT_ABC (1 << 3) +#define OMAP_LCDC_STAT_LINE_INT (1 << 4) +#define OMAP_LCDC_STAT_FUF (1 << 5) +#define OMAP_LCDC_STAT_LOADED_PALETTE (1 << 6) + +#define OMAP_LCDC_CTRL_LCD_EN (1 << 0) +#define OMAP_LCDC_CTRL_LCD_TFT (1 << 7) +#define OMAP_LCDC_CTRL_LINE_IRQ_CLR_SEL (1 << 10) + +#define OMAP_LCDC_IRQ_VSYNC (1 << 2) +#define OMAP_LCDC_IRQ_DONE (1 << 3) +#define OMAP_LCDC_IRQ_LOADED_PALETTE (1 << 4) +#define OMAP_LCDC_IRQ_LINE_NIRQ (1 << 5) +#define OMAP_LCDC_IRQ_LINE (1 << 6) +#define OMAP_LCDC_IRQ_MASK (((1 << 5) - 1) << 2) + +#endif /* __MACH_LCDC_H__ */ diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c index 4889514..3be11af 100644 --- a/arch/arm/mach-omap1/lcd_dma.c +++ b/arch/arm/mach-omap1/lcd_dma.c @@ -28,6 +28,7 @@ #include #include +#include #include int omap_lcd_dma_running(void) @@ -37,7 +38,7 @@ int omap_lcd_dma_running(void) * when it gets enabled, so assume DMA running if LCD enabled. */ if (cpu_is_omap1510()) - if (omap_readw(0xfffec000 + 0x00) & (1 << 0)) + if (omap_readw(OMAP_LCDC_CONTROL) & OMAP_LCDC_CTRL_LCD_EN) return 1; /* Check if LCD DMA is running */ diff --git a/drivers/video/omap/lcdc.c b/drivers/video/omap/lcdc.c index b831e1d..a334839 100644 --- a/drivers/video/omap/lcdc.c +++ b/drivers/video/omap/lcdc.c @@ -29,6 +29,7 @@ #include #include +#include #include #include @@ -39,38 +40,6 @@ #define MODULE_NAME "lcdc" -#define OMAP_LCDC_BASE 0xfffec000 -#define OMAP_LCDC_SIZE 256 -#define OMAP_LCDC_IRQ INT_LCD_CTRL - -#define OMAP_LCDC_CONTROL (OMAP_LCDC_BASE + 0x00) -#define OMAP_LCDC_TIMING0 (OMAP_LCDC_BASE + 0x04) -#define OMAP_LCDC_TIMING1 (OMAP_LCDC_BASE + 0x08) -#define OMAP_LCDC_TIMING2 (OMAP_LCDC_BASE + 0x0c) -#define OMAP_LCDC_STATUS (OMAP_LCDC_BASE + 0x10) -#define OMAP_LCDC_SUBPANEL (OMAP_LCDC_BASE + 0x14) -#define OMAP_LCDC_LINE_INT (OMAP_LCDC_BASE + 0x18) -#define OMAP_LCDC_DISPLAY_STATUS (OMAP_LCDC_BASE + 0x1c) - -#define OMAP_LCDC_STAT_DONE (1 << 0) -#define OMAP_LCDC_STAT_VSYNC (1 << 1) -#define OMAP_LCDC_STAT_SYNC_LOST (1 << 2) -#define OMAP_LCDC_STAT_ABC (1 << 3) -#define OMAP_LCDC_STAT_LINE_INT (1 << 4) -#define OMAP_LCDC_STAT_FUF (1 << 5) -#define OMAP_LCDC_STAT_LOADED_PALETTE (1 << 6) - -#define OMAP_LCDC_CTRL_LCD_EN (1 << 0) -#define OMAP_LCDC_CTRL_LCD_TFT (1 << 7) -#define OMAP_LCDC_CTRL_LINE_IRQ_CLR_SEL (1 << 10) - -#define OMAP_LCDC_IRQ_VSYNC (1 << 2) -#define OMAP_LCDC_IRQ_DONE (1 << 3) -#define OMAP_LCDC_IRQ_LOADED_PALETTE (1 << 4) -#define OMAP_LCDC_IRQ_LINE_NIRQ (1 << 5) -#define OMAP_LCDC_IRQ_LINE (1 << 6) -#define OMAP_LCDC_IRQ_MASK (((1 << 5) - 1) << 2) - #define MAX_PALETTE_SIZE PAGE_SIZE enum lcdc_load_mode { -- cgit v0.10.2 From 87cbb94b8333c1ffcaf87c093b2613b69fe929c5 Mon Sep 17 00:00:00 2001 From: Cory Maccarrone Date: Fri, 11 Dec 2009 16:16:36 -0800 Subject: omap1: htcherald: Update defconfig to include mux support The existing htcherald_defconfig did not include mux support, which prevented USB and other functionality from working out of the box. This change updates the defconfig to add it in. It also aligns the defconfig to the -rc8 kernel config. Signed-off-by: Cory Maccarrone Signed-off-by: Tony Lindgren diff --git a/arch/arm/configs/htcherald_defconfig b/arch/arm/configs/htcherald_defconfig index 3382676..1b39691 100644 --- a/arch/arm/configs/htcherald_defconfig +++ b/arch/arm/configs/htcherald_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc6 -# Sat Nov 14 10:56:01 2009 +# Linux kernel version: 2.6.32-rc8 +# Sat Dec 5 12:16:24 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -198,7 +198,9 @@ CONFIG_ARCH_OMAP1=y # OMAP Feature Selections # # CONFIG_OMAP_RESET_CLOCKS is not set -# CONFIG_OMAP_MUX is not set +CONFIG_OMAP_MUX=y +# CONFIG_OMAP_MUX_DEBUG is not set +CONFIG_OMAP_MUX_WARNINGS=y CONFIG_OMAP_MCBSP=y # CONFIG_OMAP_MBOX_FWK is not set CONFIG_OMAP_MPU_TIMER=y @@ -207,6 +209,7 @@ CONFIG_OMAP_LL_DEBUG_UART1=y # CONFIG_OMAP_LL_DEBUG_UART2 is not set # CONFIG_OMAP_LL_DEBUG_UART3 is not set # CONFIG_OMAP_LL_DEBUG_NONE is not set +CONFIG_OMAP_SERIAL_WAKE=y # CONFIG_OMAP_PM_NONE is not set CONFIG_OMAP_PM_NOOP=y -- cgit v0.10.2 From aed79bce7701e0cf44def227f302618be42dee3d Mon Sep 17 00:00:00 2001 From: Anand Gadiyar Date: Fri, 11 Dec 2009 16:16:36 -0800 Subject: omap3: zoom2/3: make MMC slot work again omap3: zoom2/3: make MMC slot work again Commit 12f8dfb56 accidentally broke MMC on zoom2/3. The .vmmc1 field of zoom_twldata was deleted. Restoring it allows the MMC slot to work again Signed-off-by: Anand Gadiyar Acked-by: Madhusudhan Chikkature Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index f14baa3..221a8e3 100755 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -236,6 +236,7 @@ static struct twl4030_platform_data zoom_twldata = { .gpio = &zoom_gpio_data, .keypad = &zoom_kp_twl4030_data, .codec = &zoom_codec_data, + .vmmc1 = &zoom_vmmc1, .vmmc2 = &zoom_vmmc2, .vsim = &zoom_vsim, -- cgit v0.10.2 From 860fc976321fa690c5cc77a2f66e8d6ea8d52e25 Mon Sep 17 00:00:00 2001 From: Kalle Valo Date: Fri, 11 Dec 2009 16:16:37 -0800 Subject: omap3: rx51: Use wl1251 in SPI mode 3 Otherwise Extreme Lower Power (ELP) wakeup doesn't work properly. Signed-off-by: Kalle Valo Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 8144420..bf26ad3 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -60,7 +60,7 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = { .bus_num = 4, .chip_select = 0, .max_speed_hz = 48000000, - .mode = SPI_MODE_2, + .mode = SPI_MODE_3, .controller_data = &wl1251_mcspi_config, .platform_data = &wl1251_pdata, }, -- cgit v0.10.2 From 0712fb39d7ac045171f26b24b896d58adec04133 Mon Sep 17 00:00:00 2001 From: Sergey Lapin Date: Fri, 11 Dec 2009 16:16:37 -0800 Subject: omap3: id code detection 3525 vs 3515 The runtime detection of OMAP3515 and OMAP3525 was reversed. Signed-off-by: Sergey Lapin Signed-off-by: Sanjeev Premi Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 3641ba0..a091b53 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -302,10 +302,10 @@ void __init omap3_cpuinfo(void) } else if (omap3_has_iva() && omap3_has_sgx()) { /* OMAP3430, OMAP3525, OMAP3515, OMAP3503 devices */ strcpy(cpu_name, "OMAP3430/3530"); - } else if (omap3_has_sgx()) { + } else if (omap3_has_iva()) { omap_revision = OMAP3525_REV(rev); strcpy(cpu_name, "OMAP3525"); - } else if (omap3_has_iva()) { + } else if (omap3_has_sgx()) { omap_revision = OMAP3515_REV(rev); strcpy(cpu_name, "OMAP3515"); } else { diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 9359785..0da076d 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -395,11 +395,11 @@ IS_OMAP_TYPE(3517, 0x3517) (!omap3_has_iva()) && \ (!omap3_has_sgx())) # define cpu_is_omap3515() (cpu_is_omap3430() && \ - (omap3_has_iva()) && \ - (!omap3_has_sgx())) + (!omap3_has_iva()) && \ + (omap3_has_sgx())) # define cpu_is_omap3525() (cpu_is_omap3430() && \ - (omap3_has_sgx()) && \ - (!omap3_has_iva())) + (!omap3_has_sgx()) && \ + (omap3_has_iva())) # define cpu_is_omap3530() (cpu_is_omap3430()) # define cpu_is_omap3505() is_omap3505() # define cpu_is_omap3517() is_omap3517() -- cgit v0.10.2 From 5bcf5a106feb6d760e478ed3c601db672c10b848 Mon Sep 17 00:00:00 2001 From: manjugk manjugk Date: Fri, 11 Dec 2009 16:16:37 -0800 Subject: omap3 : Enable TWL4030 Keypad for Zoom2 and Zoom3 boards The TWL4030 keypad driver is not enabled by default for zoom2 and zoom3 boards. This patch will enable the same for both zoom2 and zoom3 boards. Tested on zoom2(3430) and zoom3(3630) boards. Signed-off-by: Manjunatha GK Signed-off-by: Tony Lindgren diff --git a/arch/arm/configs/omap_zoom2_defconfig b/arch/arm/configs/omap_zoom2_defconfig index eef9362..4b00a43 100644 --- a/arch/arm/configs/omap_zoom2_defconfig +++ b/arch/arm/configs/omap_zoom2_defconfig @@ -610,7 +610,8 @@ CONFIG_INPUT_EVDEV=y # # Input Device Drivers # -# CONFIG_INPUT_KEYBOARD is not set +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_TWL4030=y # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set diff --git a/arch/arm/configs/omap_zoom3_defconfig b/arch/arm/configs/omap_zoom3_defconfig index f0e7d0f..0d7e37a 100644 --- a/arch/arm/configs/omap_zoom3_defconfig +++ b/arch/arm/configs/omap_zoom3_defconfig @@ -629,7 +629,8 @@ CONFIG_INPUT_EVDEV=y # # Input Device Drivers # -# CONFIG_INPUT_KEYBOARD is not set +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_TWL4030=y # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set -- cgit v0.10.2 From ed32350dc5ccc2b00685d857c3270688d465cd41 Mon Sep 17 00:00:00 2001 From: Madhusudhan Chikkature Date: Fri, 11 Dec 2009 16:16:37 -0800 Subject: omap3: Zoom2/3: Update hsmmc board config params Update the hsmmc zoom peripheral configuration to support: Power saving mode mmc2 8-bit support Configure mmc2 as non removable Signed-off-by: Madhusudhan Chikkature Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 221a8e3..258794d 100755 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -152,14 +152,20 @@ static struct regulator_init_data zoom_vsim = { static struct twl4030_hsmmc_info mmc[] __initdata = { { + .name = "external", .mmc = 1, .wires = 4, .gpio_wp = -EINVAL, + .power_saving = true, }, { + .name = "internal", .mmc = 2, - .wires = 4, + .wires = 8, + .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, + .nonremovable = true, + .power_saving = true, }, {} /* Terminator */ }; @@ -167,11 +173,8 @@ static struct twl4030_hsmmc_info mmc[] __initdata = { static int zoom_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { - /* gpio + 0 is "mmc0_cd" (input/IRQ), - * gpio + 1 is "mmc1_cd" (input/IRQ) - */ + /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; - mmc[1].gpio_cd = gpio + 1; twl4030_mmc_init(mmc); /* link regulators to MMC adapters ... we "know" the -- cgit v0.10.2 From ce13d4716a276f4331d78ba28a5093a63822ab95 Mon Sep 17 00:00:00 2001 From: vikram pandita Date: Fri, 11 Dec 2009 16:16:37 -0800 Subject: omap: serial: fix non-empty uart fifo read abort OMAP3xxx and OMAP4430 UART IP blocks have a restriction wrt RX FIFO. Empty RX fifo read causes an abort. OMAP3xxx: UART IP revision >= 0x52 have this issue MVR register format is: Bits Field Name Description Type Reset 31:8 RESERVED RO 0x0 7:4 MAJOR Major revision number of the module. RO 0x-- 3:0 MINOR Minor revision number of the module. RO 0x-- OMAP4xxx: All revisions have this issue Revision id check is not used as the format of MVR resigster has changed For omap4 MVR register reads as: 0x50410602 => Revision id = 0x0602 Format of MVR register on omap4 is: (Courtesy: Cousson, Benoit) Bits Field Name Description Type Reset 31:30 SCHEME Scheme revision number of module RO 0x1 29:28 RESERVED RO 0x1 27:16 FUNC Function revision number of module RO 0x041 15:11 RTL Rtl revision number of module RO 0x00 10:8 MAJOR Major revision number of the module. RO 0x6 7:6 CUSTOM Custom revision number of the module. RO 0x0 5:0 MINOR Minor revision number of the module. RO 0x02 Override the default 8250 read handler: mem_serial_in() by a custom handler: serial_in_8250() which makes sure that RX fifo is not read when empty tested on zoom3(3630) board Cc: Benoit Cousson Signed-off-by: Vikram Pandita Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 6278fe5..39b797b 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -33,6 +33,7 @@ #include "pm.h" #include "prm-regbits-34xx.h" +#define UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV 0x52 #define UART_OMAP_WER 0x17 /* Wake-up enable register */ #define DEFAULT_TIMEOUT (5 * HZ) @@ -572,6 +573,23 @@ static struct omap_uart_state omap_uart[] = { #endif }; +/* + * Override the default 8250 read handler: mem_serial_in() + * Empty RX fifo read causes an abort on omap3630 and omap4 + * This function makes sure that an empty rx fifo is not read on these silicons + * (OMAP1/2/3430 are not affected) + */ +static unsigned int serial_in_override(struct uart_port *up, int offset) +{ + if (UART_RX == offset) { + unsigned int lsr; + lsr = serial_read_reg(omap_uart[up->line].p, UART_LSR); + if (!(lsr & UART_LSR_DR)) + return -EPERM; + } + return serial_read_reg(omap_uart[up->line].p, offset); +} + void __init omap_serial_early_init(void) { int i; @@ -667,15 +685,15 @@ void __init omap_serial_init_port(int port) DEV_CREATE_FILE(dev, &dev_attr_sleep_timeout); } - /* omap44xx: Never read empty UART fifo - * omap3xxx: Never read empty UART fifo on UARTs - * with IP rev >=0x52 - */ - if (cpu_is_omap44xx()) - uart->p->serial_in = serial_in_override; - else if ((serial_read_reg(uart->p, UART_OMAP_MVER) & 0xFF) - >= UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV) - uart->p->serial_in = serial_in_override; + /* omap44xx: Never read empty UART fifo + * omap3xxx: Never read empty UART fifo on UARTs + * with IP rev >=0x52 + */ + if (cpu_is_omap44xx()) + uart->p->serial_in = serial_in_override; + else if ((serial_read_reg(uart->p, UART_OMAP_MVER) & 0xFF) + >= UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV) + uart->p->serial_in = serial_in_override; } /** -- cgit v0.10.2 From 435bb827499014ab0e57de75e9606861b08fe894 Mon Sep 17 00:00:00 2001 From: Sanjeev Premi Date: Fri, 11 Dec 2009 16:16:37 -0800 Subject: omap3: Fix OMAP35XX_REV macros In original implementation, the revision passed to these macros contained revision number in lower nibble. But, later the revision bits (OMAP_REVBITS_XX) were defined to use omap_revision[15:08] where revision number is containied in higher nibble. This patch updates the macros; else incorrect revision is detected for OMAP35xx devices. Signed-off-by: Sanjeev Premi diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 0da076d..9a028bd 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -438,12 +438,12 @@ IS_OMAP_TYPE(3517, 0x3517) #define OMAP3630_REV_ES1_0 0x36300034 #define OMAP35XX_CLASS 0x35000034 -#define OMAP3503_REV(v) (OMAP35XX_CLASS | (0x3503 << 16) | (v << 12)) -#define OMAP3515_REV(v) (OMAP35XX_CLASS | (0x3515 << 16) | (v << 12)) -#define OMAP3525_REV(v) (OMAP35XX_CLASS | (0x3525 << 16) | (v << 12)) -#define OMAP3530_REV(v) (OMAP35XX_CLASS | (0x3530 << 16) | (v << 12)) -#define OMAP3505_REV(v) (OMAP35XX_CLASS | (0x3505 << 16) | (v << 12)) -#define OMAP3517_REV(v) (OMAP35XX_CLASS | (0x3517 << 16) | (v << 12)) +#define OMAP3503_REV(v) (OMAP35XX_CLASS | (0x3503 << 16) | (v << 8)) +#define OMAP3515_REV(v) (OMAP35XX_CLASS | (0x3515 << 16) | (v << 8)) +#define OMAP3525_REV(v) (OMAP35XX_CLASS | (0x3525 << 16) | (v << 8)) +#define OMAP3530_REV(v) (OMAP35XX_CLASS | (0x3530 << 16) | (v << 8)) +#define OMAP3505_REV(v) (OMAP35XX_CLASS | (0x3505 << 16) | (v << 8)) +#define OMAP3517_REV(v) (OMAP35XX_CLASS | (0x3517 << 16) | (v << 8)) #define OMAP443X_CLASS 0x44300044 #define OMAP4430_REV_ES1_0 0x44300044 -- cgit v0.10.2